| Age | Commit message (Collapse) | Author |
|---|
|
Pull block fixes from Jens Axboe:
- Revert the mq-deadline priority handling, it's causing serious
performance regressions. While experimental patches exists to fix
this up, it's too late to do so now. Revert it and re-do it properly
for 5.15 instead.
- Fix a NULL vs IS_ERR() regression in this release (Dan)
- Fix a mq-deadline accounting regression in this release (Bart)
- Mark cryptoloop as deprecated. It's broken and dm-crypt fully
supports it, and it's actively intefering with loop. Plan on removal
for 5.16 (Christoph)
* tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-block:
cryptoloop: add a deprecation warning
pd: fix a NULL vs IS_ERR() check
Revert "block/mq-deadline: Prioritize high-priority requests"
mq-deadline: Fix request accounting
|
|
This reverts commit fb926032b3209300f9dc454a36b8299582ae545c.
Zhen reports that this commit slows down mq-deadline on a 128 thread
box, going from 258K IOPS to 170-180K. My testing shows that Optane
gen2 IOPS goes from 2.3M IOPS to 1.2M IOPS on a 64 thread box.
Looking in detail at the code, the main culprit here is needing to sum
percpu counters in the dispatch hot path, leading to very high CPU
utilization there. To make matters worse, the code currently needs to
sum 2 percpu counters, and it does so in the most naive way of iterating
possible CPUs _twice_.
Since we're close to release, revert this commit and we can re-do it
with regular per-priority counters instead for the 5.15 kernel.
Link: https://lore.kernel.org/linux-block/20210826144039.2143-1-thunder.leizhen@huawei.com/
Reported-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer may call the I/O scheduler .finish_request() callback
without having called the .insert_requests() callback. Make sure that the
mq-deadline I/O statistics are correct if the block layer inserts an I/O
request that bypasses the I/O scheduler. This patch prevents that lower
priority I/O is delayed longer than necessary for mixed I/O priority
workloads.
Cc: Niklas Cassel <Niklas.Cassel@wdc.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Fixes: 08a9ad8bf607 ("block/mq-deadline: Add cgroup support")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210824170520.1659173-1-bvanassche@acm.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"Three fixes from Ming Lei that should go into 5.14:
- Fix for a kernel panic when iterating over tags for some cases
where a flush request is present, a regression in this cycle.
- Request timeout fix
- Fix flush request checking"
* tag 'block-5.14-2021-08-20' of git://git.kernel.dk/linux-block:
blk-mq: fix is_flush_rq
blk-mq: fix kernel panic during iterating over flush request
blk-mq: don't grab rq's refcount in blk_mq_check_expired()
|
|
is_flush_rq() is called from bt_iter()/bt_tags_iter(), and runs the
following check:
hctx->fq->flush_rq == req
but the passed hctx from bt_iter()/bt_tags_iter() may be NULL because:
1) memory re-order in blk_mq_rq_ctx_init():
rq->mq_hctx = data->hctx;
...
refcount_set(&rq->ref, 1);
OR
2) tag re-use and ->rqs[] isn't updated with new request.
Fix the issue by re-writing is_flush_rq() as:
return rq->end_io == flush_end_io;
which turns out simpler to follow and immune to data race since we have
ordered WRITE rq->end_io and refcount_set(&rq->ref, 1).
Fixes: 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter")
Cc: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de>
Cc: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210818010925.607383-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For fixing use-after-free during iterating over requests, we grabbed
request's refcount before calling ->fn in commit 2e315dc07df0 ("blk-mq:
grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter").
Turns out this way may cause kernel panic when iterating over one flush
request:
1) old flush request's tag is just released, and this tag is reused by
one new request, but ->rqs[] isn't updated yet
2) the flush request can be re-used for submitting one new flush command,
so blk_rq_init() is called at the same time
3) meantime blk_mq_queue_tag_busy_iter() is called, and old flush request
is retrieved from ->rqs[tag]; when blk_mq_put_rq_ref() is called,
flush_rq->end_io may not be updated yet, so NULL pointer dereference
is triggered in blk_mq_put_rq_ref().
Fix the issue by calling refcount_set(&flush_rq->ref, 1) after
flush_rq->end_io is set. So far the only other caller of blk_rq_init() is
scsi_ioctl_reset() in which the request doesn't enter block IO stack and
the request reference count isn't used, so the change is safe.
Fixes: 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter")
Reported-by: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de>
Tested-by: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20210811142624.618598-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Inside blk_mq_queue_tag_busy_iter() we already grabbed request's
refcount before calling ->fn(), so needn't to grab it one more time
in blk_mq_check_expired().
Meantime remove extra request expire check in blk_mq_check_expired().
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20210811155202.629575-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"A few fixes for block that should go into 5.14:
- Revert the mq-deadline cgroup addition. More work is needed on this
front, let's revert it for now and get it right before having it in
a released kernel (Tejun)
- blk-iocost lockdep fix (Ming)
- nbd double completion fix (Xie)
- Fix for non-idling when clearing the shared tag flag (Yu)"
* tag 'block-5.14-2021-08-13' of git://git.kernel.dk/linux-block:
nbd: Aovid double completion of a request
blk-mq: clear active_queues before clearing BLK_MQ_F_TAG_QUEUE_SHARED
Revert "block/mq-deadline: Add cgroup support"
blk-iocost: fix lockdep warning on blkcg->lock
|
|
We run a test that delete and recover devcies frequently(two devices on
the same host), and we found that 'active_queues' is super big after a
period of time.
If device a and device b share a tag set, and a is deleted, then
blk_mq_exit_queue() will clear BLK_MQ_F_TAG_QUEUE_SHARED because there
is only one queue that are using the tag set. However, if b is still
active, the active_queues of b might never be cleared even if b is
deleted.
Thus clear active_queues before BLK_MQ_F_TAG_QUEUE_SHARED is cleared.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210731062130.1533893-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 08a9ad8bf607 ("block/mq-deadline: Add cgroup support")
and a follow-up commit c06bc5a3fb42 ("block/mq-deadline: Remove a
WARN_ON_ONCE() call"). The added cgroup support has the following issues:
* It breaks cgroup interface file format rule by adding custom elements to a
nested key-value file.
* It registers mq-deadline as a cgroup-aware policy even though all it's
doing is collecting per-cgroup stats. Even if we need these stats, this
isn't the right way to add them.
* It hasn't been reviewed from cgroup side.
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkcg->lock depends on q->queue_lock which may depend on another driver
lock required in irq context, one example is dm-thin:
Chain exists of:
&pool->lock#3 --> &q->queue_lock --> &blkcg->lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&blkcg->lock);
local_irq_disable();
lock(&pool->lock#3);
lock(&q->queue_lock);
<Interrupt>
lock(&pool->lock#3);
Fix the issue by using spin_lock_irq(&blkcg->lock) in ioc_weight_write().
Cc: Tejun Heo <tj@kernel.org>
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Link: https://lore.kernel.org/linux-block/CA+QYu4rzz6079ighEanS3Qq_Dmnczcf45ZoJoHKVLVATTo1e4Q@mail.gmail.com/T/#u
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210803070608.1766400-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"One commit to fix a possible A-A deadlock around u64_stats_sync on
32bit machines caused by updating it without disabling IRQ when it may
be read from IRQ context"
* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: rstat: fix A-A deadlock on 32bit around u64_stats_sync
|
|
Pull block fixes from Jens Axboe:
"A few minor fixes:
- Fix ldm kernel-doc warning (Bart)
- Fix adding offset twice for DMA address in n64cart (Christoph)
- Fix use-after-free in dasd path handling (Stefan)
- Order kyber insert trace correctly (Vincent)
- raid1 errored write handling fix (Wei)
- Fix blk-iolatency queue get failure handling (Yu)"
* tag 'block-5.14-2021-08-07' of git://git.kernel.dk/linux-block:
kyber: make trace_block_rq call consistent with documentation
block/partitions/ldm.c: Fix a kernel-doc warning
blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit()
n64cart: fix the dma address in n64cart_do_bvec
s390/dasd: fix use after free in dasd path handling
md/raid10: properly indicate failure when ending a failed write request
|
|
The kyber ioscheduler calls trace_block_rq_insert() *after* the request
is added to the queue but the documentation for trace_block_rq_insert()
says that the call should be made *before* the request is added to the
queue. Move the tracepoint for the kyber ioscheduler so that it is
consistent with the documentation.
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Link: https://lore.kernel.org/r/20210804194913.10497-1-vincent.fu@samsung.com
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix the following kernel-doc warning that appears when building with W=1:
block/partitions/ldm.c:31: warning: expecting prototype for ldm().
Prototype was for ldm_debug() instead
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210805173447.3249906-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If queue is dying while iolatency_set_limit() is in progress,
blk_get_queue() won't increment the refcount of the queue. However,
blk_put_queue() will still decrement the refcount later, which will
cause the refcout to be unbalanced.
Thus error out in such case to fix the problem.
Fixes: 8c772a9bfc7c ("blk-iolatency: fix IO hang due to negative inflight counter")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210805124645.543797-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- gendisk freeing fix (Christoph)
- blk-iocost wake ordering fix (Tejun)
- tag allocation error handling fix (John)
- loop locking fix. While this isn't the prettiest fix in the world,
nobody has any good alternatives for 5.14. Something to likely
revisit for 5.15. (Tetsuo)
* tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
block: delay freeing the gendisk
blk-iocost: fix operation ordering in iocg_wake_fn()
blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling
loop: reintroduce global lock for safe loop_validate_file() traversal
|
|
blkdev_get_no_open acquires a reference to the block_device through
the block device inode and then tries to acquire a device model
reference to the gendisk. But at this point the disk migh already
be freed (although the race is free). Fix this by only freeing the
gendisk from the whole device bdevs ->free_inode callback as well.
Fixes: 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210722075402.983367-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
iocg_wake_fn() open-codes wait_queue_entry removal and wakeup because it
wants the wq_entry to be always removed whether it ended up waking the
task or not. finish_wait() tests whether wq_entry needs removal without
grabbing the wait_queue lock and expects the waker to use
list_del_init_careful() after all waking operations are complete, which
iocg_wake_fn() didn't do. The operation order was wrong and the regular
list_del_init() was used.
The result is that if a waiter wakes up racing the waker, it can free pop
the wq_entry off stack before the waker is still looking at it, which can
lead to a backtrace like the following.
[7312084.588951] general protection fault, probably for non-canonical address 0x586bf4005b2b88: 0000 [#1] SMP
...
[7312084.647079] RIP: 0010:queued_spin_lock_slowpath+0x171/0x1b0
...
[7312084.858314] Call Trace:
[7312084.863548] _raw_spin_lock_irqsave+0x22/0x30
[7312084.872605] try_to_wake_up+0x4c/0x4f0
[7312084.880444] iocg_wake_fn+0x71/0x80
[7312084.887763] __wake_up_common+0x71/0x140
[7312084.895951] iocg_kick_waitq+0xe8/0x2b0
[7312084.903964] ioc_rqos_throttle+0x275/0x650
[7312084.922423] __rq_qos_throttle+0x20/0x30
[7312084.930608] blk_mq_make_request+0x120/0x650
[7312084.939490] generic_make_request+0xca/0x310
[7312084.957600] submit_bio+0x173/0x200
[7312084.981806] swap_readpage+0x15c/0x240
[7312084.989646] read_swap_cache_async+0x58/0x60
[7312084.998527] swap_cluster_readahead+0x201/0x320
[7312085.023432] swapin_readahead+0x2df/0x450
[7312085.040672] do_swap_page+0x52f/0x820
[7312085.058259] handle_mm_fault+0xa16/0x1420
[7312085.066620] do_page_fault+0x2c6/0x5c0
[7312085.074459] page_fault+0x2f/0x40
Fix it by switching to list_del_init_careful() and putting it at the end.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rik van Riel <riel@surriel.com>
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
0fa294fb1985 ("cgroup: Replace cgroup_rstat_mutex with a spinlock") added
cgroup_rstat_flush_irqsafe() allowing flushing to happen from the irq
context. However, rstat paths use u64_stats_sync to synchronize access to
64bit stat counters on 32bit machines. u64_stats_sync is implemented using
seq_lock and trying to read from an irq context can lead to A-A deadlock if
the irq happens to interrupt the stat update.
Fix it by using the irqsafe variants - u64_stats_update_begin_irqsave() and
u64_stats_update_end_irqrestore() - in the update paths. Note that none of
this matters on 64bit machines. All these are just for 32bit SMP setups.
Note that the interface was introduced way back, its first and currently
only use was recently added by 2d146aa3aa84 ("mm: memcontrol: switch to
rstat"). Stable tagging targets this commit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rik van Riel <riel@surriel.com>
Fixes: 2d146aa3aa84 ("mm: memcontrol: switch to rstat")
Cc: stable@vger.kernel.org # v5.13+
|
|
If the blk_mq_sched_alloc_tags() -> blk_mq_alloc_rqs() call fails, then we
call blk_mq_sched_free_tags() -> blk_mq_free_rqs().
It is incorrect to do so, as any rqs would have already been freed in the
blk_mq_alloc_rqs() call.
Fix by calling blk_mq_free_rq_map() only directly.
Fixes: 6917ff0b5bd41 ("blk-mq-sched: refactor scheduler initialization")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1627378373-148090-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull more block updates from Jens Axboe:
"A combination of changes that ended up depending on both the driver
and core branch (and/or the IDE removal), and a few late arriving
fixes. In detail:
- Fix io ticks wrap-around issue (Chunguang)
- nvme-tcp sock locking fix (Maurizio)
- s390-dasd fixes (Kees, Christoph)
- blk_execute_rq polling support (Keith)
- blk-cgroup RCU iteration fix (Yu)
- nbd backend ID addition (Prasanna)
- Partition deletion fix (Yufen)
- Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)
- Removal of now dead block request types due to IDE removal
(Christoph)
- Loop probing and control device cleanups (Christoph)
- Device uevent fix (Christoph)
- Misc cleanups/fixes (Tetsuo, Christoph)"
* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
block: fix the problem of io_ticks becoming smaller
nvme-tcp: can't set sk_user_data without write_lock
loop: remove unused variable in loop_set_status()
block: remove the bdgrab in blk_drop_partitions
block: grab a device refcount in disk_uevent
s390/dasd: Avoid field over-reading memcpy()
dasd: unexport dasd_set_target_state
block: check disk exist before trying to add partition
ubd: remove dead code in ubd_setup_common
nvme: use return value from blk_execute_rq()
block: return errors from blk_execute_rq()
nvme: use blk_execute_rq() for passthrough commands
block: support polling through blk_execute_rq
block: remove REQ_OP_SCSI_{IN,OUT}
block: mark blk_mq_init_queue_data static
loop: rewrite loop_exit using idr_for_each_entry
loop: split loop_lookup
loop: don't allow deleting an unspecified loop device
loop: move loop_ctl_mutex locking into loop_add
...
|
|
We run a test that create millions of cgroups and blkgs, and then trigger
blkg_destroy_all(). blkg_destroy_all() will hold spin lock for a long
time in such situation. Thus release the lock when a batch of blkgs are
destroyed.
blkcg_activate_policy() and blkcg_deactivate_policy() might have the
same problem, however, as they are basically only called from module
init/exit paths, let's leave them alone for now.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210707015649.1929797-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On the IO submission path, blk_account_io_start() may interrupt
the system interruption. When the interruption returns, the value
of part->stamp may have been updated by other cores, so the time
value collected before the interruption may be less than part->
stamp. So when this happens, we should do nothing to make io_ticks
more accurate? For kernels less than 5.0, this may cause io_ticks
to become smaller, which in turn may cause abnormal ioutil values.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/1625521646-1069-1-git-send-email-brookxu.cn@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit d2bcbeab4200 ("scsi: blkcg: Add app identifier support for
blkcg") introduced an FC_APPID config option under SCSI. However, the
added config option is not used anywhere. Simply remove it.
The block layer BLK_CGROUP_FC_APPID config option is what actually
controls whether the application ID code should be built or not. Make
this option dependent on NVMe over FC since that is currently the only
transport which supports the capability.
Fixes: d2bcbeab4200 ("scsi: blkcg: Add app identifier support for blkcg")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm/unaligned.h unification from Arnd Bergmann:
"Unify asm/unaligned.h around struct helper
The get_unaligned()/put_unaligned() helpers are traditionally
architecture specific, with the two main variants being the
"access-ok.h" version that assumes unaligned pointer accesses always
work on a particular architecture, and the "le-struct.h" version that
casts the data to a byte aligned type before dereferencing, for
architectures that cannot always do unaligned accesses in hardware.
Based on the discussion linked below, it appears that the access-ok
version is not realiable on any architecture, but the struct version
probably has no downsides. This series changes the code to use the
same implementation on all architectures, addressing the few
exceptions separately"
Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/
Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2
Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/
* tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: simplify asm/unaligned.h
asm-generic: uaccess: 1-byte access is always aligned
netpoll: avoid put_unaligned() on single character
mwifiex: re-fix for unaligned accesses
apparmor: use get_unaligned() only for multi-byte words
partitions: msdos: fix one-byte get_unaligned()
asm-generic: unaligned always use struct helpers
asm-generic: unaligned: remove byteshift helpers
powerpc: use linux/unaligned/le_struct.h on LE power7
m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
sh: remove unaligned access for sh4a
openrisc: always use unaligned-struct header
asm-generic: use asm-generic/unaligned.h for most architectures
|
|
There is no need to hold a bdev reference when removing the partition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210701081638.246552-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sending uevents requires the struct device to be alive. To
ensure that grab the device refcount instead of just an inode
reference.
Fixes: bc359d03c7ec ("block: add a disk_uevent helper")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210701081638.246552-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If disk have been deleted, we should return fail for ioctl
BLKPG_DEL_PARTITION. Otherwise, the directory /sys/class/block
may remain invalid symlinks file. The race as following:
blkdev_open
del_gendisk
disk->flags &= ~GENHD_FL_UP;
blk_drop_partitions
blkpg_ioctl
bdev_add_partition
add_partition
device_add
device_add_class_symlinks
ioctl may add_partition after del_gendisk() have tried to delete
partitions. Then, symlinks file will be created.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Link: https://lore.kernel.org/r/20210610023241.3646241-1-yuyufen@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Various DM persistent-data library improvements and fixes that
benefit both the DM thinp and cache targets.
- A few small DM kcopyd efficiency improvements.
- Significant zoned related block core, DM core and DM zoned target
changes that culminate with adding zoned append emulation (which is
required to properly fix DM crypt's zoned support).
- Various DM writecache target changes that improve efficiency. Adds an
optional "metadata_only" feature that only promotes bios flagged with
REQ_META. But the most significant improvement is writecache's
ability to pause writeback, for a confiurable time, if/when the
working set is larger than the cache (and the cache is full) -- this
ensures performance is no worse than the slower origin device.
* tag 'for-5.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
dm writecache: make writeback pause configurable
dm writecache: pause writeback if cache full and origin being written directly
dm io tracker: factor out IO tracker
dm btree remove: assign new_root only when removal succeeds
dm zone: fix dm_revalidate_zones() memory allocation
dm ps io affinity: remove redundant continue statement
dm writecache: add optional "metadata_only" parameter
dm writecache: add "cleaner" and "max_age" to Documentation
dm writecache: write at least 4k when committing
dm writecache: flush origin device when writing and cache is full
dm writecache: have ssd writeback wait if the kcopyd workqueue is busy
dm writecache: use list_move instead of list_del/list_add in writecache_writeback()
dm writecache: commit just one block, not a full page
dm writecache: remove unused gfp_t argument from wc_add_block()
dm crypt: Fix zoned block device support
dm: introduce zone append emulation
dm: rearrange core declarations for extended use from dm-zone.c
block: introduce BIO_ZONE_WRITE_LOCKED bio flag
block: introduce bio zone helpers
block: improve handling of all zones reset operation
...
|
|
The synchronous blk_execute_rq() had not provided a way for its callers
to know if its request was successful or not. Return the blk_status_t
result of the request.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210610214437.641245-4-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Poll for completions if the request's hctx is a polling type.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210610214437.641245-2-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the legacy IDE driver gone drivers now use either REQ_OP_DRV_*
or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests
into a single one.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All driver uses are gone now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210624081012.256464-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
|
|
Pull core block updates from Jens Axboe:
- disk events cleanup (Christoph)
- gendisk and request queue allocation simplifications (Christoph)
- bdev_disk_changed cleanups (Christoph)
- IO priority improvements (Bart)
- Chained bio completion trace fix (Edward)
- blk-wbt fixes (Jan)
- blk-wbt enable/disable fix (Zhang)
- Scheduler dispatch improvements (Jan, Ming)
- Shared tagset scheduler improvements (John)
- BFQ updates (Paolo, Luca, Pietro)
- BFQ lock inversion fix (Jan)
- Documentation improvements (Kir)
- CLONE_IO block cgroup fix (Tejun)
- Remove of ancient and deprecated block dump feature (zhangyi)
- Discard merge fix (Ming)
- Misc fixes or followup fixes (Colin, Damien, Dan, Long, Max, Thomas,
Yang)
* tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-block: (129 commits)
block: fix discard request merge
block/mq-deadline: Remove a WARN_ON_ONCE() call
blk-mq: update hctx->dispatch_busy in case of real scheduler
blk: Fix lock inversion between ioc lock and bfqd lock
bfq: Remove merged request already in bfq_requests_merged()
block: pass a gendisk to bdev_disk_changed
block: move bdev_disk_changed
block: add the events* attributes to disk_attrs
block: move the disk events code to a separate file
block: fix trace completion for chained bio
block/partitions/msdos: Fix typo inidicator -> indicator
block, bfq: reset waker pointer with shared queues
block, bfq: check waker only for queues with no in-flight I/O
block, bfq: avoid delayed merge of async queues
block, bfq: boost throughput by extending queue-merging times
block, bfq: consider also creation time in delayed stable merge
block, bfq: fix delayed stable merge check
block, bfq: let also stably merged queues enjoy weight raising
blk-wbt: make sure throttle is enabled properly
blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
...
|
|
ll_new_hw_segment() is reached only in case of single range discard
merge, and we don't have max discard segment size limit actually, so
it is wrong to run the following check:
if (req->nr_phys_segments + nr_phys_segs > blk_rq_get_max_segments(req))
it may be always false since req->nr_phys_segments is initialized as
one, and bio's segment count is still 1, blk_rq_get_max_segments(reg)
is 1 too.
Fix the issue by not doing the check and bypassing the calculation of
discard request's nr_phys_segments.
Based on analysis from Wang Shanker.
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Wang Shanker <shankerwangmiao@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210628023312.1903255-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The purpose of the WARN_ON_ONCE() statement in dd_insert_request() is to
verify that dd_prepare_request() cleared rq->elv.priv[0]. Since
dd_prepare_request() is called during request initialization but not if a
request is requeued, a warning is triggered if a request is requeued. Fix
this by removing the WARN_ON_ONCE() statement. This patch suppresses the
following kernel warning:
WARNING: CPU: 28 PID: 432 at block/mq-deadline-main.c:740 dd_insert_request+0x4d4/0x5b0
Workqueue: kblockd blk_mq_requeue_work
Call Trace:
dd_insert_requests+0xfa/0x130
blk_mq_sched_insert_request+0x22c/0x240
blk_mq_requeue_work+0x21c/0x2d0
process_one_work+0x4c2/0xa70
worker_thread+0x2e5/0x6d0
kthread+0x21c/0x250
ret_from_fork+0x1f/0x30
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Fixes: 08a9ad8bf607 ("block/mq-deadline: Add cgroup support")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210627211112.12720-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 6e6fcbc27e77 ("blk-mq: support batching dispatch in case of io")
starts to support io batching submission by using hctx->dispatch_busy.
However, blk_mq_update_dispatch_busy() isn't changed to update hctx->dispatch_busy
in that commit, so fix the issue by updating hctx->dispatch_busy in case
of real scheduler.
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Fixes: 6e6fcbc27e77 ("blk-mq: support batching dispatch in case of io")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210625020248.1630497-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Lockdep complains about lock inversion between ioc->lock and bfqd->lock:
bfqd -> ioc:
put_io_context+0x33/0x90 -> ioc->lock grabbed
blk_mq_free_request+0x51/0x140
blk_put_request+0xe/0x10
blk_attempt_req_merge+0x1d/0x30
elv_attempt_insert_merge+0x56/0xa0
blk_mq_sched_try_insert_merge+0x4b/0x60
bfq_insert_requests+0x9e/0x18c0 -> bfqd->lock grabbed
blk_mq_sched_insert_requests+0xd6/0x2b0
blk_mq_flush_plug_list+0x154/0x280
blk_finish_plug+0x40/0x60
ext4_writepages+0x696/0x1320
do_writepages+0x1c/0x80
__filemap_fdatawrite_range+0xd7/0x120
sync_file_range+0xac/0xf0
ioc->bfqd:
bfq_exit_icq+0xa3/0xe0 -> bfqd->lock grabbed
put_io_context_active+0x78/0xb0 -> ioc->lock grabbed
exit_io_context+0x48/0x50
do_exit+0x7e9/0xdd0
do_group_exit+0x54/0xc0
To avoid this inversion we change blk_mq_sched_try_insert_merge() to not
free the merged request but rather leave that upto the caller similarly
to blk_mq_sched_try_merge(). And in bfq_insert_requests() we make sure
to free all the merged requests after dropping bfqd->lock.
Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210623093634.27879-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, bfq does very little in bfq_requests_merged() and handles all
the request cleanup in bfq_finish_requeue_request() called from
blk_mq_free_request(). That is currently safe only because
blk_mq_free_request() is called shortly after bfq_requests_merged()
while bfqd->lock is still held. However to fix a lock inversion between
bfqd->lock and ioc->lock, we need to call blk_mq_free_request() after
dropping bfqd->lock. That would mean that already merged request could
be seen by other processes inside bfq queues and possibly dispatched to
the device which is wrong. So move cleanup of the request from
bfq_finish_requeue_request() to bfq_requests_merged().
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210623093634.27879-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bdev_disk_changed can only operate on whole devices. Make that clear
by passing a gendisk instead of the struct block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210624123240.441814-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move bdev_disk_changed to block/partitions/core.c, together with the
rest of the partition scanning code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210624123240.441814-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the events attributes to the disk_attrs array, which ensures they are
added by the driver core when the device is created rather than adding
them after the device has been added, which is racy versus uevents and
requires more boilerplate code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210624073843.251178-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the code for handling disk events from genhd.c into a new file
as it isn't very related to the rest of the file while at the same
time requiring lots of forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210624073843.251178-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For chained bio, trace_block_bio_complete in bio_endio is currently called
only by the parent bio once upon all chained bio completed.
However, the sector and size for the parent bio are modified in bio_split.
Therefore, the size and sector of the complete events might not match the
queue events in blktrace.
The original fix of bio completion trace <fbbaf700e7b1> ("block: trace
completion of all bios.") wants multiple complete events to correspond
to one queue event but missed this.
The issue can be reproduced by md/raid5 read with bio cross chunks.
To fix, move trace completion into the loop for every chained bio to call.
Fixes: fbbaf700e7b1 ("block: trace completion of all bios.")
Reviewed-by: Wade Liang <wadel@synology.com>
Reviewed-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Edward Hsieh <edwardh@synology.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210624123030.27014-1-edwardh@synology.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just a fix for a small typo in msdos_partition().
Signed-off-by: Thomas Bracht Laumann Jespersen <t@laumann.xyz>
Link: https://lore.kernel.org/r/20210619195130.19348-1-t@laumann.xyz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 85686d0dc194 ("block, bfq: keep shared queues out of the waker
mechanism") leaves shared bfq_queues out of the waker-detection
mechanism. It attains this goal by not updating the pointer
last_completed_rq_bfqq, if the last request completed belongs to a
shared bfq_queue (so that the pointer will not point to the shared
bfq_queue).
Yet this has a side effect: the pointer last_completed_rq_bfqq keeps
pointing, deceptively, to a bfq_queue that actually is not the last
one to have had a request completed. As a consequence, such a
bfq_queue may deceptively be considered as a waker of some bfq_queue,
even of some shared bfq_queue.
To address this issue, reset last_completed_rq_bfqq if the last
request completed belongs to a shared queue.
Fixes: 85686d0dc194 ("block, bfq: keep shared queues out of the waker mechanism")
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20210619140948.98712-8-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Consider two bfq_queues, say Q1 and Q2, with Q2 empty. If a request of
Q1 gets completed shortly before a new request arrives for Q2, then
BFQ flags Q1 as a candidate waker for Q2. Yet, the arrival of this new
request may have a different cause, in the following case. If also Q2
has requests in flight while waiting for the arrival of a new request,
then the completion of its own requests may be the actual cause of the
awakening of the process that sends I/O to Q2. So Q1 may be flagged
wrongly as a candidate waker.
This commit avoids this deceptive flagging, by disabling
candidate-waker flagging for Q2, if Q2 has in-flight I/O.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20210619140948.98712-7-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
Linus Torvalds
Jens Axboe
Bart Van Assche
Ming Lei
Yu Kuai
Tejun Heo
Vincent Fu
Christoph Hellwig
John Garry
Chunguang Xu
Martin K. Petersen
Yufen Yu
Keith Busch
Jan Kara
Edward Hsieh
Thomas Bracht Laumann Jespersen
Paolo Valente