| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit bf71bc16e02162388808949b179d59d0b571b965 ]
The Debian kernel v5.6 triggers this kernel panic:
Kernel panic - not syncing: Bad Address (null pointer deref?)
Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000
CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1
IAOQ[0]: mem_init+0xb0/0x150
IAOQ[1]: mem_init+0xb4/0x150
RP(r2): start_kernel+0x6c8/0x1190
Backtrace:
[<0000000040101ab4>] start_kernel+0x6c8/0x1190
[<0000000040108574>] start_parisc+0x158/0x1b8
on a HP-PARISC rp3440 machine with this memory layout:
Memory Ranges:
0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB
1) Start 0x0000004040000000 End 0x00000040ffdfffff Size 3070 MB
Fix the crash by avoiding virt_to_page() and similar functions in
mem_init() until the memory zones have been fully set up.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24cf6eef79a7e85cfd2ef9dea52f769c9192fc6e ]
"usb-nop-xceiv" is good enough if we don't lose the configuration done
by the firmware, but we'd really prefer a real driver.
Unfortunately, the PHY core is odd in that when the node is compatible
with "usb-nop-xceiv", it ignores the other compatible strings. Let's
just remove it.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 233cbffaa0b9ca874731efee67a11f005da1f87c ]
I've managed to get about everything wrong while digging these out of
OEM's board file.
Correct the bus numbers, the exact model of the NOR flash, polarity of
the chip selects and align the SPI frequency with the data sheet.
Tested that it works now, with a slight fix to the PXA SSP driver.
Link: https://lore.kernel.org/r/20200419171157.672999-16-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec7d12faf81de983efce8ff23f41c5d1bff14c41 ]
Clocks are in fact slightly different on MMP3. In particular, PLL2 is
fixed to a different frequency, there's an extra PLL3, and the GPU
clocks are configured differently.
Link: https://lore.kernel.org/r/20200419171157.672999-15-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be0ec060b54f0481fb95d59086c1484a949c903c ]
These error messages are output when booting on a BCM HR2 system:
GIC: PPI11 is secure or misconfigured
GIC: PPI13 is secure or misconfigured
Per ARM documentation these interrupts are triggered on a rising edge.
See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1,
Section 3.3.8 Interrupt Configuration Registers.
The same issue was resolved for NSP systems in commit 5f1aa51c7a1e
("ARM: dts: NSP: Fix PPI interrupt types").
Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58bb90ab415562eededb932455046924e65df342 ]
The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.
This has been verified on a board and somewhat confirmed by both the GPIO
name ("STATUS_LED_N") and the reduced schematics [1].
[1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf
Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 665e7c73a7724a393b4ec92d1ae1e029925ef2b7 ]
Avoid LDB and IPU DI clocks both using the same parent. LDB requires
pasthrough clock to avoid breaking timing while IPU DI does not.
Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent
and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV.
This fixes an issue where attempting atomic modeset while using
HDMI and display port at the same time causes LDB clock programming
to destroy the programming of HDMI that was done during the same
modeset.
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
[Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M
originally chosen by Robert Beckett to avoid affecting eMMC clock
by DRM atomic updates]
Signed-off-by: Ian Ray <ian.ray@ge.com>
[Squash Robert's and Ian's commits for bisectability, update patch
description and add stable tag]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b1f6c5e4dfaf767f6f2f120cd93b347b5a9f1aa ]
Fix the assigned-clock-parents to higher frequency clock to avoid h264
encode timeout:
[ 134.763465] mtk_vpu 10020000.vpu: vpu ipi 4 ack time out !
[ 134.769008] [MTK_VCODEC][ERROR][18]: vpu_enc_send_msg() vpu_ipi_send msg_id c002 len 32 fail -5
[ 134.777707] [MTK_VCODEC][ERROR][18]: vpu_enc_encode() AP_IPIMSG_ENC_ENCODE 0 fail
venc_sel is the clock used by h264 encoder, and venclt_sel is the clock
used by vp8 encoder. Assign venc_sel to vcodecpll_ck and venclt_sel to
vcodecpll_370p5.
vcodecpll 1482000000
vcodecpll_ck 494000000
venc_sel 494000000
...
vcodecpll_370p5 370500000
venclt_sel 370500000
Fixes: fbbad0287cec ("arm64: dts: Using standard CCF interface to set vcodec clk")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200504124442.208004-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 71f8af1110101facfad68989ff91f88f8e2c3e22 ]
Tomas Paukrt reports that his SAM9X60 based system (ARM926, ARMv5TJ)
fails to fix up alignment faults, eventually resulting in a kernel
oops.
The problem occurs when using CONFIG_CPU_USE_DOMAINS with commit
e6978e4bf181 ("ARM: save and reset the address limit when entering an
exception"). This is because the address limit is set back to
TASK_SIZE on exception entry, and, although it is restored on exception
exit, the domain register is not.
Hence, this sequence can occur:
interrupt
pt_regs->addr_limit = addr_limit // USER_DS
addr_limit = USER_DS
alignment exception
__probe_kernel_read()
old_fs = get_fs() // USER_DS
set_fs(KERNEL_DS)
addr_limit = KERNEL_DS
dacr.kernel = DOMAIN_MANAGER
interrupt
pt_regs->addr_limit = addr_limit // KERNEL_DS
addr_limit = USER_DS
alignment exception
__probe_kernel_read()
old_fs = get_fs() // USER_DS
set_fs(KERNEL_DS)
addr_limit = KERNEL_DS
dacr.kernel = DOMAIN_MANAGER
...
set_fs(old_fs)
addr_limit = USER_DS
dacr.kernel = DOMAIN_CLIENT
...
addr_limit = pt_regs->addr_limit // KERNEL_DS
interrupt returns
At this point, addr_limit is correctly restored to KERNEL_DS for
__probe_kernel_read() to continue execution, but dacr.kernel is not,
it has been reset by the set_fs(old_fs) to DOMAIN_CLIENT.
This would not have happened prior to the mentioned commit, because
addr_limit would remain KERNEL_DS, so get_fs() would have returned
KERNEL_DS, and so would correctly nest.
This commit fixes the problem by also saving the DACR on exception
entry if either CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_CPU_USE_DOMAINS are
enabled, and resetting the DACR appropriately on exception entry to
match addr_limit and PAN settings.
Fixes: e6978e4bf181 ("ARM: save and reset the address limit when entering an exception")
Reported-by: Tomas Paukrt <tomas.paukrt@advantech.cz>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ede890b0bcebe8c760aacfe20e934d98c3dc6aa ]
Integrate uaccess_save / uaccess_restore macros into the new
uaccess_entry / uaccess_exit macros respectively.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 747ffc2fcf969eff9309d7f2d1d61cb8b9e1bb40 ]
Consolidate the user access assembly code to asm/uaccess-asm.h. This
moves the csdb, check_uaccess, uaccess_mask_range_ptr, uaccess_enable,
uaccess_disable, uaccess_save, uaccess_restore macros, and creates two
new ones for exception entry and exit - uaccess_entry and uaccess_exit.
This makes the uaccess_save and uaccess_restore macros private to
asm/uaccess-asm.h.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c962369d72f286659e6446919f88d69b943cb4d ]
The size field of the tag header structure is supposed to be set to the
size of a tag structure including the header.
Fixes: c772568788b5f0 ("ARM: add additional table to compressed kernel")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 51bb38cb78363fdad1f89e87357b7bc73e39ba88 ]
If raw_copy_from_user(to, from, N) returns K, callers expect
the first N - K bytes starting at to to have been replaced with
the contents of corresponding area starting at from and the last
K bytes of destination *left* *unmodified*.
What arch/sky/lib/usercopy.c is doing is broken - it can lead to e.g.
data corruption on write(2).
raw_copy_to_user() is inaccurate about return value, which is a bug,
but consequences are less drastic than for raw_copy_from_user().
And just what are those access_ok() doing in there? I mean, look into
linux/uaccess.h; that's where we do that check (as well as zero tail
on failure in the callers that need zeroing).
AFAICS, all of that shouldn't be hard to fix; something like a patch
below might make a useful starting point.
I would suggest moving these macros into usercopy.c (they are never
used anywhere else) and possibly expanding them there; if you leave
them alive, please at least rename __copy_user_zeroing(). Again,
it must not zero anything on failed read.
Said that, I'm not sure we won't be better off simply turning
usercopy.c into usercopy.S - all that is left there is a couple of
functions, each consisting only of inline asm.
Guo Ren reply:
Yes, raw_copy_from_user is wrong, it's no need zeroing code.
unsigned long _copy_from_user(void *to, const void __user *from,
unsigned long n)
{
unsigned long res = n;
might_fault();
if (likely(access_ok(from, n))) {
kasan_check_write(to, n);
res = raw_copy_from_user(to, from, n);
}
if (unlikely(res))
memset(to + (n - res), 0, res);
return res;
}
EXPORT_SYMBOL(_copy_from_user);
You are right and access_ok() should be removed.
but, how about:
do {
...
"2: stw %3, (%1, 0) \n" \
+ " subi %0, 4 \n" \
"9: stw %4, (%1, 4) \n" \
+ " subi %0, 4 \n" \
"10: stw %5, (%1, 8) \n" \
+ " subi %0, 4 \n" \
"11: stw %6, (%1, 12) \n" \
+ " subi %0, 4 \n" \
" addi %2, 16 \n" \
" addi %1, 16 \n" \
Don't expand __ex_table
AI Viro reply:
Hey, I've no idea about the instruction scheduling on csky -
if that doesn't slow the things down, all the better. It's just
that copy_to_user() and friends are on fairly hot codepaths,
and in quite a few situations they will dominate the speed of
e.g. read(2). So I tried to keep the fast path unchanged.
Up to the architecture maintainers, obviously. Which would be
you...
As for the fixups size increase (__ex_table size is unchanged)...
You have each of those macros expanded exactly once.
So the size is not a serious argument, IMO - useless complexity
would be, if it is, in fact, useless; the size... not really,
especially since those extra subi will at least offset it.
Again, up to you - asm optimizations of (essentially)
memcpy()-style loops are tricky and can depend upon the
fairly subtle details of architecture. So even on something
I know reasonably well I would resort to direct experiments
if I can't pass the buck to architecture maintainers.
It *is* worth optimizing - this is where read() from a file
that is already in page cache spends most of the time, etc.
Guo Ren reply:
Thx, after fixup some typo “sub %0, 4”, apply the patch.
TODO:
- user copy/from codes are still need optimizing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a6630aef93394ac54494c7e273e9bc026509375 ]
riscv64-none-linux-gnu-ld: mm/page_alloc.o: in function `.L0 ':
page_alloc.c:(.text+0xd34): undefined reference to `__kernel_map_pages'
riscv64-none-linux-gnu-ld: page_alloc.c:(.text+0x104a): undefined reference to `__kernel_map_pages'
riscv64-none-linux-gnu-ld: mm/page_alloc.o: in function `__pageblock_pfn_to_page':
page_alloc.c:(.text+0x145e): undefined reference to `__kernel_map_pages'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6633a5aa8eb6bda70eb3a9837efd28a67ccc6e0a ]
Interrupt has been disabled in __schedule() with local_irq_disable()
and enabled in finish_task_switch->finish_lock_switch() with
local_irq_enabled(), So needn't to disable irq here.
Signed-off-by: Liu Yibin <jiulong@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 229a0ddee1108a3f82a873e6cbbe35c92c540444 ]
[ 5221.974084] Unable to handle kernel paging request at virtual address 0xfffff000, pc: 0x8002c18e
[ 5221.985929] Oops: 00000000
[ 5221.989488]
[ 5221.989488] CURRENT PROCESS:
[ 5221.989488]
[ 5221.992877] COMM=callchain_test PID=11962
[ 5221.995213] TEXT=00008000-000087e0 DATA=00009f1c-0000a018 BSS=0000a018-0000b000
[ 5221.999037] USER-STACK=7fc18e20 KERNEL-STACK=be204680
[ 5221.999037]
[ 5222.003292] PC: 0x8002c18e (perf_callchain_kernel+0x3e/0xd4)
[ 5222.007957] LR: 0x8002c198 (perf_callchain_kernel+0x48/0xd4)
[ 5222.074873] Call Trace:
[ 5222.074873] [<800a248e>] get_perf_callchain+0x20a/0x29c
[ 5222.074873] [<8009d964>] perf_callchain+0x64/0x80
[ 5222.074873] [<8009dc1c>] perf_prepare_sample+0x29c/0x4b8
[ 5222.074873] [<8009de6e>] perf_event_output_forward+0x36/0x98
[ 5222.074873] [<800497e0>] search_exception_tables+0x20/0x44
[ 5222.074873] [<8002cbb6>] do_page_fault+0x92/0x378
[ 5222.074873] [<80098608>] __perf_event_overflow+0x54/0xdc
[ 5222.074873] [<80098778>] perf_swevent_hrtimer+0xe8/0x164
[ 5222.074873] [<8002ddd0>] update_mmu_cache+0x0/0xd8
[ 5222.074873] [<8002c014>] user_backtrace+0x58/0xc4
[ 5222.074873] [<8002c0b4>] perf_callchain_user+0x34/0xd0
[ 5222.074873] [<800a2442>] get_perf_callchain+0x1be/0x29c
[ 5222.074873] [<8009d964>] perf_callchain+0x64/0x80
[ 5222.074873] [<8009d834>] perf_output_sample+0x78c/0x858
[ 5222.074873] [<8009dc1c>] perf_prepare_sample+0x29c/0x4b8
[ 5222.074873] [<8009de94>] perf_event_output_forward+0x5c/0x98
[ 5222.097846]
[ 5222.097846] [<800a0300>] perf_event_exit_task+0x58/0x43c
[ 5222.097846] [<8006c874>] hrtimer_interrupt+0x104/0x2ec
[ 5222.097846] [<800a0300>] perf_event_exit_task+0x58/0x43c
[ 5222.097846] [<80437bb6>] dw_apb_clockevent_irq+0x2a/0x4c
[ 5222.097846] [<8006c770>] hrtimer_interrupt+0x0/0x2ec
[ 5222.097846] [<8005f2e4>] __handle_irq_event_percpu+0xac/0x19c
[ 5222.097846] [<80437bb6>] dw_apb_clockevent_irq+0x2a/0x4c
[ 5222.097846] [<8005f408>] handle_irq_event_percpu+0x34/0x88
[ 5222.097846] [<8005f480>] handle_irq_event+0x24/0x64
[ 5222.097846] [<8006218c>] handle_level_irq+0x68/0xdc
[ 5222.097846] [<8005ec76>] __handle_domain_irq+0x56/0xa8
[ 5222.097846] [<80450e90>] ck_irq_handler+0xac/0xe4
[ 5222.097846] [<80029012>] csky_do_IRQ+0x12/0x24
[ 5222.097846] [<8002a3a0>] csky_irq+0x70/0x80
[ 5222.097846] [<800ca612>] alloc_set_pte+0xd2/0x238
[ 5222.097846] [<8002ddd0>] update_mmu_cache+0x0/0xd8
[ 5222.097846] [<800a0340>] perf_event_exit_task+0x98/0x43c
The original fp check doesn't base on the real kernal stack region.
Invalid fp address may cause kernel panic.
Signed-off-by: Mao Han <han_mao@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 165f2d2858013253042809df082b8df7e34e86d7 ]
Just as comment mentioned, the msa format:
cr<30/31, 15> MSA register format:
31 - 29 | 28 - 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
BA Reserved SH WA B SO SEC C D V
So we should shift 29 bits not 28 bits for mask
Signed-off-by: Liu Yibin <jiulong@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa8174aa225fe3d53b37552e5066e6f0301dbabd ]
Some drivers use PAGE_SHARED, pgprot_writecombine()/pgprot_device(),
add the defination to fix build error if NOMMU.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0502bee37cdef755d63eee60236562e5605e2480 ]
Drop static declaration to fix following build error if FRAME_POINTER disabled,
riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0':
perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ab7fbad0c7d7a4f9b320a059a171a92a34b6d409 ]
Fix unmet direct dependencies Warning and fix Kconfig indent.
WARNING: unmet direct dependencies detected for POWER_RESET_SYSCON
Depends on [n]: POWER_RESET [=n] && OF [=y] && HAS_IOMEM [=y]
Selected by [y]:
- SOC_VIRT [=y]
WARNING: unmet direct dependencies detected for POWER_RESET_SYSCON_POWEROFF
Depends on [n]: POWER_RESET [=n] && OF [=y] && HAS_IOMEM [=y]
Selected by [y]:
- SOC_VIRT [=y]
WARNING: unmet direct dependencies detected for RTC_DRV_GOLDFISH
Depends on [n]: RTC_CLASS [=n] && OF [=y] && HAS_IOMEM [=y] && (GOLDFISH [=y] || COMPILE_TEST [=n])
Selected by [y]:
- SOC_VIRT [=y]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 738b150ecefbffb6e55cfa8a3b66a844f777d8fb ]
Looks like using the UART CTS pin does not always trigger for a wake-up
when the SoC is idle.
This is probably because the modem first uses gpio_149 to signal the SoC
that data will be sent, and the CTS will only get used later when the
data transfer is starting.
Let's fix the issue by configuring the gpio_149 pad as the wakeirq for
UART. We have gpio_149 managed by the USB PHY for powering up the right
USB mode, and after that, the gpio gets recycled as the modem wake-up
pin. If needeed, the USB PHY can also later on be configured to use
gpio_149 pad as the wakeirq as a shared irq.
Let's also configure the missing properties for uart-has-rtscts and
current-speed for the modem port while at it. We already configure the
hardware flow control pins with uart1_pins pinctrl setting.
Cc: maemo-leste@lists.dyne.org
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30fa60c678eaa27b8f2a531920d77f7184658f73 ]
The wlan on droid4 is flakey on some devices, and experiments have shown this
gets fixed if we disable the internal pull for wlan gpio interrupt line.
The symptoms are that the wlan connection is very slow and almost useless
with lots of wlcore firmware reboot warnings in the dmesg.
In addition to configuring the wlan gpio pulls, let's also configure the rest
of the wlan sd pins. We have not configured those eariler as we're booting
using kexec.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 855bdca1781c79eb661f89c8944c4a719ce720e8 ]
A test with the command below gives these errors:
arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1:
'#address-cells' is a required property
The $nodename pattern for spi nodes is
"^spi(@.*|-[0-9a-f])*$". To prevent warnings rename
'spi-0' and 'spi-1' pinctrl sub nodenames to
'spi0' and 'spi1' in 'rk322x.dtsi'.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200424123923.8192-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b14f3898d2c25a9b47a61fb879d0b1f3af92c59b ]
Dts files with Rockchip 'gpu' nodes were manually verified.
In order to automate this process arm,mali-utgard.txt
has been converted to yaml. In the new setup dtbs_check with
arm,mali-utgard.yaml expects clock-names values
in the same order, so fix that.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200425192500.1808-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c604fd810bda667bdc20b2c041917baa7803e0fb ]
Dts files with Rockchip rk3399 'gpu' nodes were manually verified.
In order to automate this process arm,mali-midgard.txt
has been converted to yaml. In the new setup dtbs_check with
arm,mali-midgard.yaml expects interrupts and interrupt-names values
in the same order. Fix this for rk3399.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/
arm,mali-midgard.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200425143837.18706-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c617ed88502d0b05149e7f32f3b3fd8a0663f7e2 ]
The status was removed of the '&gmac2phy' node with the apply
of a patch long time ago, so fix status for '&gmac2phy'
in 'rk3328-evb.dts'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200425122345.12902-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 621c8d0c233e260232278a4cfd3380caa3c1da29 ]
A test with the command below gives for example this error:
arch/arm/boot/dts/rk3229-xms6.dt.yaml: phy@0:
'#phy-cells' is a required property
The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200416170321.4216-2-jbx6244@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 287e0d538fcec2f6e8eb1e565bf0749f3b90186d ]
A test with the command below gives for example this error:
arch/arm/boot/dts/rk3228-evb.dt.yaml: phy@0:
'#phy-cells' is a required property
The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200416170321.4216-1-jbx6244@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7710f80ecd9c74544a22557ab581cf603e713f51 ]
After patch f864edff110d ("ASoC: qdsp6: q6routing: remove default routing")
and 9b60441692d9 ("ASoC: qdsp6: q6asm-dai: only enable dais from device tree")
asm dais and routing needs to be properly specified at device tree level.
This patch fixes this.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200422101922.8894-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 187b96db5ca79423618dfa29a05c438c34f9e1f0 upstream.
Normally, show_trace_log_lvl() scans the stack, looking for text
addresses to print. In parallel, it unwinds the stack with
unwind_next_frame(). If the stack address matches the pointer returned
by unwind_get_return_address_ptr() for the current frame, the text
address is printed normally without a question mark. Otherwise it's
considered a breadcrumb (potentially from a previous call path) and it's
printed with a question mark to indicate that the address is unreliable
and typically can be ignored.
Since the following commit:
f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
... for inactive tasks, show_trace_log_lvl() prints *only* unreliable
addresses (prepended with '?').
That happens because, for the first frame of an inactive task,
unwind_get_return_address_ptr() returns the wrong return address
pointer: one word *below* the task stack pointer. show_trace_log_lvl()
starts scanning at the stack pointer itself, so it never finds the first
'reliable' address, causing only guesses to being printed.
The first frame of an inactive task isn't a normal stack frame. It's
actually just an instance of 'struct inactive_task_frame' which is left
behind by __switch_to_asm(). Now that this inactive frame is actually
exposed to callers, fix unwind_get_return_address_ptr() to interpret it
properly.
Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200522135435.vbxs7umku5pyrdbk@treble
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 70b690547d5ea1a3d135a4cc39cd1e08246d0c3a upstream.
initrd_start must not point at the location the initrd is loaded into
the crashkernel memory but at the location it will be after the
crashkernel memory is swapped with the memory at 0.
Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader")
Reported-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Tested-by: Lianbo Jiang <lijiang@redhat.com>
Link: https://lore.kernel.org/r/20200512193956.15ae3f23@laptop2-ibm.local
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0cfc8a8d70dcd51db783e8e87917e02149c71458 upstream.
The srmmu_nocache_init() uses __nocache_fix() macro to add an offset to
page table entry to access srmmu_nocache_pool.
But since sparc32 has only three actual page table levels, pgd, p4d and
pud are essentially the same thing and pgd_offset() and p4d_offset() are
no-ops, the __nocache_fix() should be done only at PUD level.
Remove __nocache_fix() for p4d_offset() and pud_offset() and keep it
only for PUD and lower levels.
Fixes: c2bc26f7ca1f ("sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2bc26f7ca1ff1165bb6669a7a4cccc20ffd2ced upstream.
The kbuild test robot reported the following warning:
arch/sparc/mm/srmmu.c: In function 'srmmu_nocache_init': arch/sparc/mm/srmmu.c:300:9: error: variable 'pud' set but not used [-Werror=unused-but-set-variable]
300 | pud_t *pud;
This warning is caused by misprint in the page table traversal in
srmmu_nocache_init() function which accessed a PMD entry using PGD
rather than PUD.
Since sparc32 has only 3 page table levels, the PGD and PUD are
essentially the same and usage of __nocache_fix() removed the type
checking.
Use PUD for the consistency and to silence the compiler warning.
Fixes: 7235db268a2777bc38 ("sparc32: use pgtable-nopud instead of 4level-fixup")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200520132005.GM1059226@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc94cf2092c7c1267fa2deb8388d624f50eba808 upstream.
Using the socket ioctls on arch/sh (and only there) causes build time
problems when __kernel_old_timeval/__kernel_old_timespec are not already
visible to the compiler.
Add an explict include line for the header that defines these
structures.
Fixes: 8c709f9a0693 ("y2038: sh: remove timeval/timespec usage from headers")
Fixes: 0768e17073dc ("net: socket: implement 64-bit timestamps")
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200519131327.1836482-1-arnd@arndb.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c1cbcbd6c56c79de2c07159be4f55386bb0bef2 upstream.
With certain kernel configurations, the R_390_JMP_SLOT relocation type
might be generated, which is not expected by the KASLR relocation code,
and the kernel stops with the message "Unknown relocation type".
This was found with a zfcpdump kernel config, where CONFIG_MODULES=n
and CONFIG_VFIO=n. In that case, symbol_get() is used on undefined
__weak symbols in virt/kvm/vfio.c, which results in the generation
of R_390_JMP_SLOT relocation types.
Fix this by handling R_390_JMP_SLOT similar to R_390_GLOB_DAT.
Fixes: 805bc0bc238f ("s390/kernel: build a relocatable kernel")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f058599e22d59e594e5aae1dc10560568d8f4a8b upstream.
The s390_mmio_read/write syscalls are currently broken when running with
MIO.
The new pcistb_mio/pcstg_mio/pcilg_mio instructions are executed
similiarly to normal load/store instructions and do address translation
in the current address space. That means inside the kernel they are
aware of mappings into kernel address space while outside the kernel
they use user space mappings (usually created through mmap'ing a PCI
device file).
Now when existing user space applications use the s390_pci_mmio_write
and s390_pci_mmio_read syscalls, they pass I/O addresses that are mapped
into user space so as to be usable with the new instructions without
needing a syscall. Accessing these addresses with the old instructions
as done currently leads to a kernel panic.
Also, for such a user space mapping there may not exist an equivalent
kernel space mapping which means we can't just use the new instructions
in kernel space.
Instead of replicating user mappings in the kernel which then might
collide with other mappings, we can conceptually execute the new
instructions as if executed by the user space application using the
secondary address space. This even allows us to directly store to the
user pointer without the need for copy_to/from_user().
Cc: stable@vger.kernel.org
Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8659a0e0efdd975c73355dbc033f79ba3b31e82c upstream.
Several strange crashes have been eventually traced back to
STRICT_KERNEL_RWX and its interaction with code patching.
Various paths in our ftrace, kprobes and other patching code need to
be hardened against patching failures, otherwise we can end up running
with partially/incorrectly patched ftrace paths, kprobes or jump
labels, which can then cause strange crashes.
Although fixes for those are in development, they're not -rc material.
There also seem to be problems with the underlying strict RWX logic,
which needs further debugging.
So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from
enabling the option and tripping over the bugs.
Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520133605.972649-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1cf6022bd9161081215028203919c33fcfa6debb upstream.
Quoth the man page:
```
If the tracee was restarted by PTRACE_SYSCALL or PTRACE_SYSEMU, the
tracee enters syscall-enter-stop just prior to entering any system
call (which will not be executed if the restart was using
PTRACE_SYSEMU, regardless of any change made to registers at this
point or how the tracee is restarted after this stop).
```
The parenthetical comment is currently true on x86 and powerpc,
but not currently true on arm64. arm64 re-checks the _TIF_SYSCALL_EMU
flag after the syscall entry ptrace stop. However, at this point,
it reflects which method was used to re-start the syscall
at the entry stop, rather than the method that was used to reach it.
Fix that by recording the original flag before performing the ptrace
stop, bringing the behavior in line with documentation and x86/powerpc.
Fixes: f086f67485c5 ("arm64: ptrace: add support for syscall emulation")
Cc: <stable@vger.kernel.org> # 5.3.x-
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Bin Lu <Bin.Lu@arm.com>
[catalin.marinas@arm.com: moved 'flags' bit masking]
[catalin.marinas@arm.com: changed 'flags' type to unsigned long]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ebeea8ca8a4d1d453ad299aef0507dab04f6e8d upstream.
Given the legacy bpf_probe_read{,str}() BPF helpers are broken on archs
with overlapping address ranges, we should really take the next step to
disable them from BPF use there.
To generally fix the situation, we've recently added new helper variants
bpf_probe_read_{user,kernel}() and bpf_probe_read_{user,kernel}_str().
For details on them, see 6ae08ae3dea2 ("bpf: Add probe_read_{user, kernel}
and probe_read_{user,kernel}_str helpers").
Given bpf_probe_read{,str}() have been around for ~5 years by now, there
are plenty of users at least on x86 still relying on them today, so we
cannot remove them entirely w/o breaking the BPF tracing ecosystem.
However, their use should be restricted to archs with non-overlapping
address ranges where they are working in their current form. Therefore,
move this behind a CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE and
have x86, arm64, arm select it (other archs supporting it can follow-up
on it as well).
For the remaining archs, they can workaround easily by relying on the
feature probe from bpftool which spills out defines that can be used out
of BPF C code to implement the drop-in replacement for old/new kernels
via: bpftool feature probe macro
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20200515101118.6508-2-daniel@iogearbox.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8101b5a1531f3390b3a69fa7934c70a8fd6566ad ]
Stephen reported the following build warning on a ARM multi_v7_defconfig
build with GCC 9.2.1:
kernel/futex.c: In function 'do_futex':
kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
1676 | return oldval == cmparg;
| ~~~~~~~^~~~~~~~~
kernel/futex.c:1652:6: note: 'oldval' was declared here
1652 | int oldval, ret;
| ^~~~~~
introduced by commit a08971e9488d ("futex: arch_futex_atomic_op_inuser()
calling conventions change").
While that change should not make any difference it confuses GCC which
fails to work out that oldval is not referenced when the return value is
not zero.
GCC fails to properly analyze arch_futex_atomic_op_inuser(). It's not the
early return, the issue is with the assembly macros. GCC fails to detect
that those either set 'ret' to 0 and set oldval or set 'ret' to -EFAULT
which makes oldval uninteresting. The store to the callsite supplied oldval
pointer is conditional on ret == 0.
The straight forward way to solve this is to make the store unconditional.
Aside of addressing the build warning this makes sense anyway because it
removes the conditional from the fastpath. In the error case the stored
value is uninteresting and the extra store does not matter at all.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87pncao2ph.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c84cb3735fd53c91101ccdb191f2e3331a9262cb ]
Leon reported that the printk_once() in __setup_APIC_LVTT() triggers a
lockdep splat due to a lock order violation between hrtimer_base::lock and
console_sem, when the 'once' condition is reset via
/sys/kernel/debug/clear_warn_once after boot.
The initial printk cannot trigger this because that happens during boot
when the local APIC timer is set up on the boot CPU.
Prevent it by moving the printk to a place which is guaranteed to be only
called once during boot.
Mark the deadline timer check related functions and data __init while at
it.
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87y2qhoshi.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c13ca86dcf80a8c705b1f3674ff43d318e970e0 ]
As of today the CONFIG_USB isn't explicitly present in HSDK defconfig
as it is implicitly forcibly enabled by UDL driver which selects CONFIG_USB
in its kconfig.
The commit 5d50bd440bc2 ("drm/udl: Make udl driver depend on CONFIG_USB")
reverse the dependencies between UDL and USB so UDL now depends on
CONFIG_USB and not selects it. This introduces regression for ARC HSDK
board as HSDK defconfig wasn't adjusted and now it misses USB support
due to lack of CONFIG_USB enabled.
Fix that.
Cc: <stable@vger.kernel.org> # 5.6.x
Fixes: 5d50bd440bc2 ("drm/udl: Make udl driver depend on CONFIG_USB")
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c4e0e4ab4cf3ec2b3f0b628ead108d677644ebd9 upstream.
Bank_num is a one-based count of banks, not a zero-based index. It
overflows the allocated space only when strictly greater than
KVM_MAX_MCE_BANKS.
Fixes: a9e38c3e01ad ("KVM: x86: Catch potential overrun in MCE setup")
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200511225616.19557-1-jmattson@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 48084c3595cb7429f6ba734cfea1313573b9a7fa upstream.
Selecting PERF_EVENTS without selecting RISCV_BASE_PMU results in a build
error.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[Palmer: commit text]
Fixes: 178e9fc47aae("perf: riscv: preliminary RISC-V support")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa4f3f56ccd28ac031ab275e673ed4098855fed4 upstream.
To prevent verifying the kernel module appended signature
twice (finit_module), once by the module_sig_check() and again by IMA,
powerpc secure boot rules define an IMA architecture specific policy
rule only if CONFIG_MODULE_SIG_FORCE is not enabled. This,
unfortunately, does not take into account the ability of enabling
"sig_enforce" on the boot command line (module.sig_enforce=1).
Including the IMA module appraise rule results in failing the
finit_module syscall, unless the module signing public key is loaded
onto the IMA keyring.
This patch fixes secure boot policy rules to be based on
CONFIG_MODULE_SIG instead.
Fixes: 4238fad366a6 ("powerpc/ima: Add support to initialize ima policy rules")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/1588342612-14532-1-git-send-email-nayna@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d02f6b7dab8228487268298ea1f21081c0b4b3eb upstream.
get/put_user() can be called with nontrivial arguments. fs/proc/page.c
has a good example:
if (put_user(stable_page_flags(ppage), out)) {
stable_page_flags() is quite a lot of code, including spin locks in
the page allocator.
Ensure these arguments are evaluated before user access is allowed.
This improves security by reducing code with access to userspace, but
it also fixes a PREEMPT bug with KUAP on powerpc/64s:
stable_page_flags() is currently called with AMR set to allow writes,
it ends up calling spin_unlock(), which can call preempt_schedule. But
the task switch code can not be called with AMR set (it relies on
interrupts saving the register), so this blows up.
It's fine if the code inside allow_user_access() is preemptible,
because a timer or IPI will save the AMR, but it's not okay to
explicitly cause a reschedule.
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200407041245.600651-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e47cb97f153193d4b41ca8d48127da14513d54c7 upstream.
The Clock Pulse Generator (CPG) device node lacks the extal2 clock.
This may lead to a failure registering the "r" clock, or to a wrong
parent for the "usb24s" clock, depending on MD_CK2 pin configuration and
boot loader CPG_USBCKCR register configuration.
This went unnoticed, as this does not affect the single upstream board
configuration, which relies on the first clock input only.
Fixes: d9ffd583bf345e2e ("ARM: shmobile: r8a7740: add SoC clocks to DTS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f4d71c6ea9e58c07dd4d02d09c5dd9bb780ec4b1 upstream.
Missing the renesas,ipmmu-main property on ipmmu_vip[01] nodes.
Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes)
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1587108543-23786-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0f739fdfe9e5ce668bd6d3210f310df282321837 upstream.
The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for
each channel, but currently only 1 is described.
Fix this by adding the missing interrupts.
Fixes: f7b65230019b9dac ("ARM: shmobile: r8a73a4: Add CMT1 node")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200408090926.25201-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15ddc3e17aec0de4c69d595b873e184432b9791d upstream.
Using SDMA1 with UART1 is causing a "Timeout waiting for CH0" error.
This patch changes to ahb clock from SDMA1_ROOT to AHB which fixes the
timeout error.
Fixes: 6c3debcbae47 ("arm64: dts: freescale: Add i.MX8MN dtsi support")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Helge Deller
Lubomir Rintel
Hamish Martin
Vincent Stehlé
Robert Beckett
Hsin-Yi Wang
Russell King
Łukasz Stelmach
Al Viro
Kefeng Wang
Liu Yibin
Mao Han
Tony Lindgren
Johan Jonker
Srinivas Kandagatla
Josh Poimboeuf
Philipp Rudo
Mike Rapoport
Arnd Bergmann
Gerald Schaefer
Niklas Schnelle
Michael Ellerman
Keno Fischer
Daniel Borkmann
Thomas Gleixner
Eugeniy Paltsev
Jim Mattson
Nayna Jain
Nicholas Piggin
Geert Uytterhoeven
Yoshihiro Shimoda
Adam Ford