| Age | Commit message (Collapse) | Author |
|---|
|
commit 6ccb4ac2bf8a35c694ead92f8ac5530a16e8f2c8 upstream.
There's a bug in skiboot that causes the OPAL_XIVE_ALLOCATE_IRQ call
to return the 32-bit value 0xffffffff when OPAL has run out of IRQs.
Unfortunatelty, OPAL return values are signed 64-bit entities and
errors are supposed to be negative. If that happens, the linux code
confusingly treats 0xffffffff as a valid IRQ number and panics at some
point.
A fix was recently merged in skiboot:
e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()")
but we need a workaround anyway to support older skiboots already
in the field.
Internally convert 0xffffffff to OPAL_RESOURCE which is the usual error
returned upon resource exhaustion.
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821713818.1985334.14123187368108582810.stgit@bahia.lan
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d0b7a302d58abe24ed0f32a0672dd4c356bb73db upstream.
This reverts commit 24fe1b0efad4fcdd32ce46cffeab297f22581707.
Commit 24fe1b0efad4fcdd ("arm64: Remove unnecessary ISBs from
set_{pte,pmd,pud}") removed ISB instructions immediately following updates
to the page table, on the grounds that they are not required by the
architecture and a DSB alone is sufficient to ensure that subsequent data
accesses use the new translation:
DDI0487E_a, B2-128:
| ... no instruction that appears in program order after the DSB
| instruction can alter any state of the system or perform any part of
| its functionality until the DSB completes other than:
|
| * Being fetched from memory and decoded
| * Reading the general-purpose, SIMD and floating-point,
| Special-purpose, or System registers that are directly or indirectly
| read without causing side-effects.
However, the same document also states the following:
DDI0487E_a, B2-125:
| DMB and DSB instructions affect reads and writes to the memory system
| generated by Load/Store instructions and data or unified cache
| maintenance instructions being executed by the PE. Instruction fetches
| or accesses caused by a hardware translation table access are not
| explicit accesses.
which appears to claim that the DSB alone is insufficient. Unfortunately,
some CPU designers have followed the second clause above, whereas in Linux
we've been relying on the first. This means that our mapping sequence:
MOV X0, <valid pte>
STR X0, [Xptep] // Store new PTE to page table
DSB ISHST
LDR X1, [X2] // Translates using the new PTE
can actually raise a translation fault on the load instruction because the
translation can be performed speculatively before the page table update and
then marked as "faulting" by the CPU. For user PTEs, this is ok because we
can handle the spurious fault, but for kernel PTEs and intermediate table
entries this results in a panic().
Revert the offending commit to reintroduce the missing barriers.
Cc: <stable@vger.kernel.org>
Fixes: 24fe1b0efad4fcdd ("arm64: Remove unnecessary ISBs from set_{pte,pmd,pud}")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4030b4c585c41eeefec7bd20ce3d0e100a0f2e4d ]
When the 'start' parameter is >= 0xFF000000 on 32-bit
systems, or >= 0xFFFFFFFF'FF000000 on 64-bit systems,
fill_gva_list() gets into an infinite loop.
With such inputs, 'cur' overflows after adding HV_TLB_FLUSH_UNIT
and always compares as less than end. Memory is filled with
guest virtual addresses until the system crashes.
Fix this by never incrementing 'cur' to be larger than 'end'.
Reported-by: Jong Hyun Park <park.jonghyun@yonsei.ac.kr>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2ffd9e33ce4a ("x86/hyper-v: Use hypercall for remote TLB flush")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b8bd476e78e89c9ea26c3b435ad0201c3d7dbf5 ]
Identical to __put_user(); the __get_user() argument evalution will too
leak UBSAN crud into the __uaccess_begin() / __uaccess_end() region.
While uncommon this was observed to happen for:
drivers/xen/gntdev.c: if (__get_user(old_status, batch->status[i]))
where UBSAN added array bound checking.
This complements commit:
6ae865615fc4 ("x86/uaccess: Dont leak the AC flag into __put_user() argument evaluation")
Tested-by Sedat Dilek <sedat.dilek@gmail.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: broonie@kernel.org
Cc: sfr@canb.auug.org.au
Cc: akpm@linux-foundation.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: mhocko@suse.cz
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20190829082445.GM2369@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45f5d5a9e34d3fe4140a9a3b5f7ebe86c252440a ]
Currently there are two nodes named "regulator1" in the Draak DTS: a
3.3V regulator for the eMMC and the LVDS decoder, and a 12V regulator
for the backlight. This causes the former to be overwritten by the
latter.
Fix this by renaming all regulators with numerical suffixes to use named
suffixes, which are less likely to conflict.
Fixes: 4fbd4158fe8967e9 ("arm64: dts: renesas: r8a77995: draak: Add backlight")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f4cd769c410e2285a4e9873a684d90423f03090 ]
When counting dispatched micro-ops with cnt_ctl=1, in order to prevent
sample bias, IBS hardware preloads the least significant 7 bits of
current count (IbsOpCurCnt) with random values, such that, after the
interrupt is handled and counting resumes, the next sample taken
will be slightly perturbed.
The current count bitfield is in the IBS execution control h/w register,
alongside the maximum count field.
Currently, the IBS driver writes that register with the maximum count,
leaving zeroes to fill the current count field, thereby overwriting
the random bits the hardware preloaded for itself.
Fix the driver to actually retain and carry those random bits from the
read of the IBS control register, through to its write, instead of
overwriting the lower current count bits with zeroes.
Tested with:
perf record -c 100001 -e ibs_op/cnt_ctl=1/pp -a -C 0 taskset -c 0 <workload>
'perf annotate' output before:
15.70 65: addsd %xmm0,%xmm1
17.30 add $0x1,%rax
15.88 cmp %rdx,%rax
je 82
17.32 72: test $0x1,%al
jne 7c
7.52 movapd %xmm1,%xmm0
5.90 jmp 65
8.23 7c: sqrtsd %xmm1,%xmm0
12.15 jmp 65
'perf annotate' output after:
16.63 65: addsd %xmm0,%xmm1
16.82 add $0x1,%rax
16.81 cmp %rdx,%rax
je 82
16.69 72: test $0x1,%al
jne 7c
8.30 movapd %xmm1,%xmm0
8.13 jmp 65
8.24 7c: sqrtsd %xmm1,%xmm0
8.39 jmp 65
Tested on Family 15h and 17h machines.
Machines prior to family 10h Rev. C don't have the RDWROPCNT capability,
and have the IbsOpCurCnt bitfield reserved, so this patch shouldn't
affect their operation.
It is unknown why commit db98c5faf8cb ("perf/x86: Implement 64-bit
counter support for IBS") ignored the lower 4 bits of the IbsOpCurCnt
field; the number of preloaded random bits has always been 7, AFAICT.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Arnaldo Carvalho de Melo" <acme@kernel.org>
Cc: <x86@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Borislav Petkov" <bp@alien8.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: "Namhyung Kim" <namhyung@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20190826195730.30614-1-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44d3bbb6f5e501b873218142fe08cdf62a4ac1f3 ]
We see our Nehalem machines reporting 'perfevents: irq loop stuck!' in
some cases when using perf:
perfevents: irq loop stuck!
WARNING: CPU: 0 PID: 3485 at arch/x86/events/intel/core.c:2282 intel_pmu_handle_irq+0x37b/0x530
...
RIP: 0010:intel_pmu_handle_irq+0x37b/0x530
...
Call Trace:
<NMI>
? perf_event_nmi_handler+0x2e/0x50
? intel_pmu_save_and_restart+0x50/0x50
perf_event_nmi_handler+0x2e/0x50
nmi_handle+0x6e/0x120
default_do_nmi+0x3e/0x100
do_nmi+0x102/0x160
end_repeat_nmi+0x16/0x50
...
? native_write_msr+0x6/0x20
? native_write_msr+0x6/0x20
</NMI>
intel_pmu_enable_event+0x1ce/0x1f0
x86_pmu_start+0x78/0xa0
x86_pmu_enable+0x252/0x310
__perf_event_task_sched_in+0x181/0x190
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
finish_task_switch+0x158/0x260
__schedule+0x2f6/0x840
? hrtimer_start_range_ns+0x153/0x210
schedule+0x32/0x80
schedule_hrtimeout_range_clock+0x8a/0x100
? hrtimer_init+0x120/0x120
ep_poll+0x2f7/0x3a0
? wake_up_q+0x60/0x60
do_epoll_wait+0xa9/0xc0
__x64_sys_epoll_wait+0x1a/0x20
do_syscall_64+0x4e/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fdeb1e96c03
...
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: acme@kernel.org
Cc: Josh Hunt <johunt@akamai.com>
Cc: bpuranda@akamai.com
Cc: mingo@redhat.com
Cc: jolsa@redhat.com
Cc: tglx@linutronix.de
Cc: namhyung@kernel.org
Cc: alexander.shishkin@linux.intel.com
Link: https://lkml.kernel.org/r/1566256411-18820-1-git-send-email-johunt@akamai.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5b3efa4f1479c91cb8361acef55f9c6662feba57 ]
pfn_valid can be wrong when parsing a invalid pfn whose phys address
exceeds BITS_PER_LONG as the MSB will be trimed when shifted.
The issue originally arise from bellowing call stack, which corresponding to
an access of the /proc/kpageflags from userspace with a invalid pfn parameter
and leads to kernel panic.
[46886.723249] c7 [<c031ff98>] (stable_page_flags) from [<c03203f8>]
[46886.723264] c7 [<c0320368>] (kpageflags_read) from [<c0312030>]
[46886.723280] c7 [<c0311fb0>] (proc_reg_read) from [<c02a6e6c>]
[46886.723290] c7 [<c02a6e24>] (__vfs_read) from [<c02a7018>]
[46886.723301] c7 [<c02a6f74>] (vfs_read) from [<c02a778c>]
[46886.723315] c7 [<c02a770c>] (SyS_pread64) from [<c0108620>]
(ret_fast_syscall+0x0/0x28)
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a256f2e329df0773022d28df2c3d206b9aaf1e61 ]
Currently, various virtual memory areas of Linux RISC-V are organized
in increasing order of their virtual addresses is as follows:
1. User space area (This is lowest area and starts at 0x0)
2. FIXMAP area
3. VMALLOC area
4. Kernel area (This is highest area and starts at PAGE_OFFSET)
The maximum size of user space aread is represented by TASK_SIZE.
On RV32 systems, TASK_SIZE is defined as VMALLOC_START which causes the
user space area to overlap the FIXMAP area. This allows user space apps
to potentially corrupt the FIXMAP area and kernel OF APIs will crash
whenever they access corrupted FDT in the FIXMAP area.
On RV64 systems, TASK_SIZE is set to fixed 256GB and no other areas
happen to overlap so we don't see any FIXMAP area corruptions.
This patch fixes FIXMAP area corruption on RV32 systems by setting
TASK_SIZE to FIXADDR_START. We also move FIXADDR_TOP, FIXADDR_SIZE,
and FIXADDR_START defines to asm/pgtable.h so that we can avoid cyclic
header includes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e5bedc2c258341702ddffbd7688c5e6eb01eafa ]
Rahul Tanwar reported the following bug on DT systems:
> 'ioapic_dynirq_base' contains the virtual IRQ base number. Presently, it is
> updated to the end of hardware IRQ numbers but this is done only when IOAPIC
> configuration type is IOAPIC_DOMAIN_LEGACY or IOAPIC_DOMAIN_STRICT. There is
> a third type IOAPIC_DOMAIN_DYNAMIC which applies when IOAPIC configuration
> comes from devicetree.
>
> See dtb_add_ioapic() in arch/x86/kernel/devicetree.c
>
> In case of IOAPIC_DOMAIN_DYNAMIC (DT/OF based system), 'ioapic_dynirq_base'
> remains to zero initialized value. This means that for OF based systems,
> virtual IRQ base will get set to zero.
Such systems will very likely not even boot.
For DT enabled machines ioapic_dynirq_base is irrelevant and not
updated, so simply map the IRQ base 1:1 instead.
Reported-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Tested-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alan@linux.intel.com
Cc: bp@alien8.de
Cc: cheol.yong.kim@intel.com
Cc: qi-ming.wu@intel.com
Cc: rahul.tanwar@intel.com
Cc: rppt@linux.ibm.com
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/20190821081330.1187-1-rahul.tanwar@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c51bc12d06b3a5494fbfcbd788a8e307932a06e9 ]
A timing hazard exists when an early fork/exec thread begins
exiting and sets its mm pointer to NULL while a separate core
tries to update the section information.
This commit ensures that the mm pointer is not NULL before
setting its section parameters. The arguments provided by
commit 11ce4b33aedc ("ARM: 8672/1: mm: remove tasklist locking
from update_sections_early()") are equally valid for not
requiring grabbing the task_lock around this check.
Fixes: 08925c2f124f ("ARM: 8464/1: Update all mm structures with section adjustments")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 91b4db5313a2c793aabc2143efb8ed0cf0fdd097 ]
"p runtime/jit: pass > 32bit index to tail_call" fails when
bpf_jit_enable=1, because the tail call is not executed.
This in turn is because the generated code assumes index is 64-bit,
while it must be 32-bit, and as a result prog array bounds check fails,
while it should pass. Even if bounds check would have passed, the code
that follows uses 64-bit index to compute prog array offset.
Fix by using clrj instead of clgrj for comparing index with array size,
and also by using llgfr for truncating index to 32 bits before using it
to compute prog array offset.
Fixes: 6651ee070b31 ("s390/bpf: implement bpf_tail_call() helper")
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5b63fb90adb95a178ad403e1703f59bf1ff2c16b ]
Commit 4e27f752ab8c ("ARM: OMAP2+: Drop mmc platform data for am330x and
am43xx") dropped legacy mmc platform data for am3 and am4, but missed the
fact that we never updated the dts files for mmc3 that is directly on l3
interconnect instead of l4 interconnect. This leads to a situation with
no legacy platform data and incomplete dts data.
Let's update the mmc instances on l3 interconnect to probe properly with
ti-sysc interconnect target module driver to make mmc3 work again. Let's
still keep legacy "ti,hwmods" property around for v5.2 kernel and only
drop it later on.
Note that there is no need to use property status = "disabled" for mmc3.
The default for dts is enabled, and runtime PM will idle unused instances
just fine.
Fixes: 4e27f752ab8c ("ARM: OMAP2+: Drop mmc platform data for am330x and am43xx")
Reported-by: David Lechner <david@lechnology.com>
Tested-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa8397e45c64e60c80373bc19ee56e42a6bed9b6 ]
Non-serio path of Amstrad Delta FIQ deferred handler depended on
irq_ack() method provided by OMAP GPIO driver. That method has been
removed by commit 693de831c6e5 ("gpio: omap: remove irq_ack method").
Remove useless code from the deferred handler and reimplement the
missing operation inside the base FIQ handler.
Should another dependency - irq_unmask() - be ever removed from the OMAP
GPIO driver, WARN once if missing.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07f9a8be66a9bd86f9eaedf8f8aeb416195adab8 ]
According to the latest am572x[1] and dra74x[2] data manuals, mmc3
default, hs, sdr12 and sdr25 modes use iodelay values given in
MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is
selected and correct iodelay values can be configured.
[1] http://www.ti.com/lit/ds/symlink/am5728.pdf
[2] http://www.ti.com/lit/ds/symlink/dra746.pdf
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8613e2ca4fff764f23785eadfa54a08631ee682a ]
As seen on the AM335x TRM all the UARTs controller only are 0x1000 in size.
Fix this in the DTS.
Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45da5e09dd32fa98c32eaafe2513db6bd75e2f4f ]
We have errata i688 workaround produce warnings on SoCs other than
omap4 and omap5:
omap4_sram_init:Unable to allocate sram needed to handle errata I688
omap4_sram_init:Unable to get sram pool needed to handle errata I688
This is happening because there is no ti,omap4-mpu node, or no SRAM
to configure for the other SoCs, so let's remove the warning based
on the SoC revision checks.
As nobody has complained it seems that the other SoC variants do not
need this workaround.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb2d267c448f4bc3a3389d97c56391cb779178ae ]
"masking, test in bounds 3" fails on s390, because
BPF_ALU64_IMM(BPF_NEG, BPF_REG_2, 0) ignores the top 32 bits of
BPF_REG_2. The reason is that JIT emits lcgfr instead of lcgr.
The associated comment indicates that the code was intended to
emit lcgr in the first place, it's just that the wrong opcode
was used.
Fix by using the correct opcode.
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d4bacdc207a7b62941700b374e7199cbb184a43 ]
The G12A USB2 OTG capable PHY uses a 8bit large UTMI bus, and the OTG
controller gets the PHY but width by probing the associated phy.
By default it will use 16bit wide settings if a phy is not specified,
in our case we specified the phy, but not the phy-names.
The dwc2 bindings specifies that if phys is present, phy-names shall be
"usb2-phy".
Adding phy-names = "usb2-phy" solves the OTG PHY bus configuration.
Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89bbc6f1eb90809b1538b3a9c54030c558180e3b ]
We are currently using a wrong register for dcan revision. Although
this is currently only used for detecting the dcan module, let's
fix it to avoid confusion.
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e8647bbe1c8233a20c32fd2648258f2c05c7335 ]
The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at
the interconnect target module level for the modules that have it
defined. Otherwise we get the following warnings:
dts flag should be at module level for ti,no-idle-on-init
dts flag should be at module level for ti,no-reset-on-init
Reviewed-by: Suman Anna <s-anna@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afd58b162e48076e3fe66d08a69eefbd6fe71643 ]
TRM says PWMSS_SYSCONFIG bit for SOFTRESET changes to zero when
reset is completed. Let's configure it as otherwise we get warnings
on boot when we check the data against dts provided data. Eventually
the legacy platform data will be just dropped, but let's fix the
warning first.
Reviewed-by: Suman Anna <s-anna@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fb59ee37cfe20d10d19568899d1458a58361246c ]
If UHS speed modes are enabled, a compatible SD card switches down to
1.8V during enumeration. If after this a software reboot/crash takes
place and on-chip ROM tries to enumerate the SD card, the difference in
IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card.
The fix for this is to have support for power cycling the card in
hardware (with a PORz/soft-reset line causing a power cycle of the
card). Because the beaglebone X15 (rev A,B and C), am57xx-idks and
am57xx-evms don't have this capability, disable voltage switching for
these boards.
The major effect of this is that the maximum supported speed
mode is now high speed(50 MHz) down from SDR104(200 MHz).
commit 88a748419b84 ("ARM: dts: am57xx-idk: Remove support for voltage
switching for SD card") did this only for idk boards. Do it for all
affected boards.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 89a3496e0664577043666791ec07fb731d57c950 upstream.
We use mmu_vmemmap_psize to find the page size for mapping the vmmemap area.
With radix translation, we are suboptimally setting this value to PAGE_SIZE.
We do check for 2M page size support and update mmu_vmemap_psize to use
hugepage size but we suboptimally reset the value to PAGE_SIZE in
radix__early_init_mmu(). This resulted in always mapping vmemmap area with
64K page size.
Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
GCC9 build warning
commit 42e0e95474fc6076b5cd68cab8fa0340a1797a72 upstream.
One of the very few warnings I have in the current build comes from
arch/x86/boot/edd.c, where I get the following with a gcc9 build:
arch/x86/boot/edd.c: In function ‘query_edd’:
arch/x86/boot/edd.c:148:11: warning: taking address of packed member of ‘struct boot_params’ may result in an unaligned pointer value [-Waddress-of-packed-member]
148 | mbrptr = boot_params.edd_mbr_sig_buffer;
| ^~~~~~~~~~~
This warning triggers because we throw away all the CFLAGS and then make
a new set for REALMODE_CFLAGS, so the -Wno-address-of-packed-member we
added in the following commit is not present:
6f303d60534c ("gcc-9: silence 'address-of-packed-member' warning")
The simplest solution for now is to adjust the warning for this version
of CFLAGS as well, but it would definitely make sense to examine whether
REALMODE_CFLAGS could be derived from CFLAGS, so that it picks up changes
in the compiler flags environment automatically.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 118154bdf54ca79e4b5f3ce6d4a8a7c6b7c2c76f upstream.
When CPU raise #NPF on guest data access and guest CR4.SMAP=1, it is
possible that CPU microcode implementing DecodeAssist will fail
to read bytes of instruction which caused #NPF. This is AMD errata
1096 and it happens because CPU microcode reading instruction bytes
incorrectly attempts to read code as implicit supervisor-mode data
accesses (that is, just like it would read e.g. a TSS), which are
susceptible to SMAP faults. The microcode reads CS:RIP and if it is
a user-mode address according to the page tables, the processor
gives up and returns no instruction bytes. In this case,
GuestIntrBytes field of the VMCB on a VMEXIT will incorrectly
return 0 instead of the correct guest instruction bytes.
Current KVM code attemps to detect and workaround this errata, but it
has multiple issues:
1) It mistakenly checks if guest CR4.SMAP=0 instead of guest CR4.SMAP=1,
which is required for encountering a SMAP fault.
2) It assumes SMAP faults can only occur when guest CPL==3.
However, in case guest CR4.SMEP=0, the guest can execute an instruction
which reside in a user-accessible page with CPL<3 priviledge. If this
instruction raise a #NPF on it's data access, then CPU DecodeAssist
microcode will still encounter a SMAP violation. Even though no sane
OS will do so (as it's an obvious priviledge escalation vulnerability),
we still need to handle this semanticly correct in KVM side.
Note that (2) *is* a useful optimization, because CR4.SMAP=1 is an easy
triggerable condition and guests usually enable SMAP together with SMEP.
If the vCPU has CR4.SMEP=1, the errata could indeed be encountered onlt
at guest CPL==3; otherwise, the CPU would raise a SMEP fault to guest
instead of #NPF. We keep this condition to avoid false positives in
the detection of the errata.
In addition, to avoid future confusion and improve code readbility,
include details of the errata in code and not just in commit message.
Fixes: 05d5a4863525 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)")
Cc: Singh Brijesh <brijesh.singh@amd.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b119019847fbcac36ed1384f166c91f177d070e7 upstream.
When L0 is executing handle_invept(), the TDP MMU is active. Emulating
an L1 INVEPT does require synchronizing the appropriate shadow EPT
root(s), but a call to kvm_mmu_sync_roots in this context won't do
that. Similarly, the hardware TLB and paging-structure-cache entries
associated with the appropriate shadow EPT root(s) must be flushed,
but requesting a TLB_FLUSH from this context won't do that either.
How did this ever work? KVM always does a sync_roots and TLB flush (in
the correct context) when transitioning from L1 to L2. That isn't the
best choice for nested VM performance, but it effectively papers over
the mistakes here.
Remove the unnecessary operations and leave a comment to try to do
better in the future.
Reported-by: Junaid Shahid <junaids@google.com>
Fixes: bfd0a56b90005f ("nEPT: Nested INVEPT")
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Nadav Har'El <nyh@il.ibm.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: Xinhao Xu <xinhao.xu@intel.com>
Cc: Yang Zhang <yang.z.zhang@Intel.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by Peter Shier <pshier@google.com>
Reviewed-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 980ef4d22a95a3cd84a9b8ffaa7b81b391d173c6 upstream.
Checking "SecureBoot" mode is not sufficient, also check "SetupMode".
Fixes: 399574c64eaf ("x86/ima: retry detecting secure boot mode")
Reported-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a23ebc66a46786769dd68bfdaa3102345819b9c upstream.
Commit
3a63f70bf4c3a ("x86/boot: Early parse RSDP and save it in boot_params")
broke kexec boot on EFI systems. efi_get_rsdp_addr() in the early
parsing code tries to search RSDP from the EFI tables but that will
crash because the table address is virtual when the kernel was booted by
kexec (set_virtual_address_map() has run in the first kernel and cannot
be run again in the second kernel).
In the case of kexec, the physical address of EFI tables is provided via
efi_setup_data in boot_params, which is set up by kexec(1).
Factor out the table parsing code and use different pointers depending
on whether the kernel is booted by kexec or not.
[ bp: Massage. ]
Fixes: 3a63f70bf4c3a ("x86/boot: Early parse RSDP and save it in boot_params")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Cc: Chao Fan <fanc.fnst@cn.fujitsu.com>
Cc: Dave Young <dyoung@redhat.com>
Link: https://lkml.kernel.org/r/20190408231011.GA5402@jeru.linux.bs1.fc.nec.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6fbcdd59094ade30db63f32316e9502425d7b256 upstream.
Commit ddf35cf3764b ("powerpc: Use barrier_nospec in copy_from_user()")
Added barrier_nospec before loading from user-controlled pointers. The
intention was to order the load from the potentially user-controlled
pointer vs a previous branch based on an access_ok() check or similar.
In order to achieve the same result, add a barrier_nospec to the
raw_copy_in_user() function before loading from such a user-controlled
pointer.
Fixes: ddf35cf3764b ("powerpc: Use barrier_nospec in copy_from_user()")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
to fix kexec relocation errors
commit e16c2983fba0fa6763e43ad10916be35e3d8dc05 upstream.
The last change to this Makefile caused relocation errors when loading
a kdump kernel. Restore -mcmodel=large (not -mcmodel=kernel),
-ffreestanding, and -fno-zero-initialized-bsss, without reverting to
the former practice of resetting KBUILD_CFLAGS.
Purgatory.ro is a standalone binary that is not linked against the
rest of the kernel. Its image is copied into an array that is linked
to the kernel, and from there kexec relocates it wherever it desires.
With the previous change to compiler flags, the error "kexec: Overflow
in relocation type 11 value 0x11fffd000" was encountered when trying
to load the crash kernel. This is from kexec code trying to relocate
the purgatory.ro object.
From the error message, relocation type 11 is R_X86_64_32S. The
x86_64 ABI says:
"The R_X86_64_32 and R_X86_64_32S relocations truncate the
computed value to 32-bits. The linker must verify that the
generated value for the R_X86_64_32 (R_X86_64_32S) relocation
zero-extends (sign-extends) to the original 64-bit value."
This type of relocation doesn't work when kexec chooses to place the
purgatory binary in memory that is not reachable with 32 bit
addresses.
The compiler flag -mcmodel=kernel allows those type of relocations to
be emitted, so revert to using -mcmodel=large as was done before.
Also restore the -ffreestanding and -fno-zero-initialized-bss flags
because they are appropriate for a stand alone piece of object code
which doesn't explicitly zero the bss, and one other report has said
undefined symbols are encountered without -ffreestanding.
These identical compiler flag changes need to happen for every object
that becomes part of the purgatory.ro object, so gather them together
first into PURGATORY_CFLAGS_REMOVE and PURGATORY_CFLAGS, and then
apply them to each of the objects that have C source. Do not apply
any of these flags to kexec-purgatory.o, which is not part of the
standalone object but part of the kernel proper.
Tested-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Tested-by: Andreas Smas <andreas@lonelycoder.com>
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: None
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: clang-built-linux@googlegroups.com
Cc: dimitri.sivanich@hpe.com
Cc: mike.travis@hpe.com
Cc: russ.anderson@hpe.com
Fixes: b059f801a937 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS")
Link: https://lkml.kernel.org/r/20190905202346.GA26595@swahl-linux
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andreas Smas <andreas@lonelycoder.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f7eea636c3d505fe6f1d1066234f1aaf7171b681 upstream.
The implementation of vmread to memory is still incomplete, as it
lacks the ability to do vmread to I/O memory just like vmptrst.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 002c5f73c508f7df5681bda339831c27f3c1aef4 upstream.
James Harvey reported a livelock that was introduced by commit
d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when
removing a memslot"").
The livelock occurs because kvm_mmu_zap_all() as it exists today will
voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs
to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck
in an infinite loop as it can never zap all pages before observing lock
contention or the need to reschedule. The equivalent of kvm_mmu_zap_all()
that was in use at the time of the reverted commit (4e103134b8623, "KVM:
x86/mmu: Zap only the relevant pages when removing a memslot") employed
a fast invalidate mechanism and was not susceptible to the above livelock.
There are three ways to fix the livelock:
- Reverting the revert (commit d012a06ab1d23) is not a viable option as
the revert is needed to fix a regression that occurs when the guest has
one or more assigned devices. It's unlikely we'll root cause the device
assignment regression soon enough to fix the regression timely.
- Remove the conditional reschedule from kvm_mmu_zap_all(). However, although
removing the reschedule would be a smaller code change, it's less safe
in the sense that the resulting kvm_mmu_zap_all() hasn't been used in
the wild for flushing memslots since the fast invalidate mechanism was
introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to
invalidate all pages"), back in 2013.
- Reintroduce the fast invalidate mechanism and use it when zapping shadow
pages in response to a memslot being deleted/moved, which is what this
patch does.
For all intents and purposes, this is a revert of commit ea145aacf4ae8
("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of
commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate
all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM:
MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86:
use the fast way to invalidate all pages") respectively.
Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"")
Reported-by: James Harvey <jamespharvey20@gmail.com>
Cc: Alex Willamson <alex.williamson@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 541ab2aeb28251bf7135c7961f3a6080eebcc705 upstream.
Emulation of VMPTRST can incorrectly inject a page fault
when passed an operand that points to an MMIO address.
The page fault will use uninitialized kernel stack memory
as the CR2 and error code.
The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just ensure
that the error code and CR2 are zero.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Cc: stable@vger.kernel.org
[add comment]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 53936b5bf35e140ae27e4bbf0447a61063f400da upstream.
When the userspace program runs the KVM_S390_INTERRUPT ioctl to inject
an interrupt, we convert them from the legacy struct kvm_s390_interrupt
to the new struct kvm_s390_irq via the s390int_to_s390irq() function.
However, this function does not take care of all types of interrupts
that we can inject into the guest later (see do_inject_vcpu()). Since we
do not clear out the s390irq values before calling s390int_to_s390irq(),
there is a chance that we copy random data from the kernel stack which
could be leaked to the userspace later.
Specifically, the problem exists with the KVM_S390_INT_PFAULT_INIT
interrupt: s390int_to_s390irq() does not handle it, and the function
__inject_pfault_init() later copies irq->u.ext which contains the
random kernel stack data. This data can then be leaked either to
the guest memory in __deliver_pfault_init(), or the userspace might
retrieve it directly with the KVM_S390_GET_IRQ_STATE ioctl.
Fix it by handling that interrupt type in s390int_to_s390irq(), too,
and by making sure that the s390irq struct is properly pre-initialized.
And while we're at it, make sure that s390int_to_s390irq() now
directly returns -EINVAL for unknown interrupt types, so that we
immediately get a proper error code in case we add more interrupt
types to do_inject_vcpu() without updating s390int_to_s390irq()
sometime in the future.
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/kvm/20190912115438.25761-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
as target for memset()
commit 13a17cc0526f08d1df9507f7484176371cd263a0 upstream.
If userspace doesn't set KVM_MEM_LOG_DIRTY_PAGES on memslot before calling
kvm_s390_vm_start_migration(), kernel will oops with:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
Fault in home space mode while using kernel ASCE.
AS:0000000002a2000b R2:00000001bff8c00b R3:00000001bff88007 S:00000001bff91000 P:000000000000003d
Oops: 0004 ilc:2 [#1] SMP
...
Call Trace:
([<001fffff804ec552>] kvm_s390_vm_set_attr+0x347a/0x3828 [kvm])
[<001fffff804ecfc0>] kvm_arch_vm_ioctl+0x6c0/0x1998 [kvm]
[<001fffff804b67e4>] kvm_vm_ioctl+0x51c/0x11a8 [kvm]
[<00000000008ba572>] do_vfs_ioctl+0x1d2/0xe58
[<00000000008bb284>] ksys_ioctl+0x8c/0xb8
[<00000000008bb2e2>] sys_ioctl+0x32/0x40
[<000000000175552c>] system_call+0x2b8/0x2d8
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<0000000000dbaf60>] __memset+0xc/0xa0
due to ms->dirty_bitmap being NULL, which might crash the host.
Make sure that ms->dirty_bitmap is set before using it or
return -EINVAL otherwise.
Cc: <stable@vger.kernel.org>
Fixes: afdad61615cc ("KVM: s390: Fix storage attributes migration with memory slots")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Link: https://lore.kernel.org/kvm/20190911075218.29153-1-imammedo@redhat.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb377eb80c80339b580831a3c0fcce34a4c9d1ad upstream.
Matt bisected a sparc64 specific issue with semctl, shmctl and msgctl
to a commit from my y2038 series in linux-5.1, as I missed the custom
sys_ipc() wrapper that sparc64 uses in place of the generic version that
I patched.
The problem is that the sys_{sem,shm,msg}ctl() functions in the kernel
now do not allow being called with the IPC_64 flag any more, resulting
in a -EINVAL error when they don't recognize the command.
Instead, the correct way to do this now is to call the internal
ksys_old_{sem,shm,msg}ctl() functions to select the API version.
As we generally move towards these functions anyway, change all of
sparc_ipc() to consistently use those in place of the sys_*() versions,
and move the required ksys_*() declarations into linux/syscalls.h
The IS_ENABLED(CONFIG_SYSVIPC) check is required to avoid link
errors when ipc is disabled.
Reported-by: Matt Turner <mattst88@gmail.com>
Fixes: 275f22148e87 ("ipc: rename old-style shmctl/semctl/msgctl syscalls")
Cc: stable@vger.kernel.org
Tested-by: Matt Turner <mattst88@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a8318c13e79badb92bc6640704a64cc022a6eb97 upstream.
When in userspace and MSR FP=0 the hardware FP state is unrelated to
the current process. This is extended for transactions where if tbegin
is run with FP=0, the hardware checkpoint FP state will also be
unrelated to the current process. Due to this, we need to ensure this
hardware checkpoint is updated with the correct state before we enable
FP for this process.
Unfortunately we get this wrong when returning to a process from a
hardware interrupt. A process that starts a transaction with FP=0 can
take an interrupt. When the kernel returns back to that process, we
change to FP=1 but with hardware checkpoint FP state not updated. If
this transaction is then rolled back, the FP registers now contain the
wrong state.
The process looks like this:
Userspace: Kernel
Start userspace
with MSR FP=0 TM=1
< -----
...
tbegin
bne
Hardware interrupt
---- >
<do_IRQ...>
....
ret_from_except
restore_math()
/* sees FP=0 */
restore_fp()
tm_active_with_fp()
/* sees FP=1 (Incorrect) */
load_fp_state()
FP = 0 -> 1
< -----
Return to userspace
with MSR TM=1 FP=1
with junk in the FP TM checkpoint
TM rollback
reads FP junk
When returning from the hardware exception, tm_active_with_fp() is
incorrectly making restore_fp() call load_fp_state() which is setting
FP=1.
The fix is to remove tm_active_with_fp().
tm_active_with_fp() is attempting to handle the case where FP state
has been changed inside a transaction. In this case the checkpointed
and transactional FP state is different and hence we must restore the
FP state (ie. we can't do lazy FP restore inside a transaction that's
used FP). It's safe to remove tm_active_with_fp() as this case is
handled by restore_tm_state(). restore_tm_state() detects if FP has
been using inside a transaction and will set load_fp and call
restore_math() to ensure the FP state (checkpoint and transaction) is
restored.
This is a data integrity problem for the current process as the FP
registers are corrupted. It's also a security problem as the FP
registers from one process may be leaked to another.
Similarly for VMX.
A simple testcase to replicate this will be posted to
tools/testing/selftests/powerpc/tm/tm-poison.c
This fixes CVE-2019-15031.
Fixes: a7771176b439 ("powerpc: Don't enable FP/Altivec if not checkpointed")
Cc: stable@vger.kernel.org # 4.15+
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190904045529.23002-2-gromero@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8205d5d98ef7f155de211f5e2eb6ca03d95a5a60 upstream.
When we take an FP unavailable exception in a transaction we have to
account for the hardware FP TM checkpointed registers being
incorrect. In this case for this process we know the current and
checkpointed FP registers must be the same (since FP wasn't used
inside the transaction) hence in the thread_struct we copy the current
FP registers to the checkpointed ones.
This copy is done in tm_reclaim_thread(). We use thread->ckpt_regs.msr
to determine if FP was on when in userspace. thread->ckpt_regs.msr
represents the state of the MSR when exiting userspace. This is setup
by check_if_tm_restore_required().
Unfortunatley there is an optimisation in giveup_all() which returns
early if tsk->thread.regs->msr (via local variable `usermsr`) has
FP=VEC=VSX=SPE=0. This optimisation means that
check_if_tm_restore_required() is not called and hence
thread->ckpt_regs.msr is not updated and will contain an old value.
This can happen if due to load_fp=255 we start a userspace process
with MSR FP=1 and then we are context switched out. In this case
thread->ckpt_regs.msr will contain FP=1. If that same process is then
context switched in and load_fp overflows, MSR will have FP=0. If that
process now enters a transaction and does an FP instruction, the FP
unavailable will not update thread->ckpt_regs.msr (the bug) and MSR
FP=1 will be retained in thread->ckpt_regs.msr. tm_reclaim_thread()
will then not perform the required memcpy and the checkpointed FP regs
in the thread struct will contain the wrong values.
The code path for this happening is:
Userspace: Kernel
Start userspace
with MSR FP/VEC/VSX/SPE=0 TM=1
< -----
...
tbegin
bne
fp instruction
FP unavailable
---- >
fp_unavailable_tm()
tm_reclaim_current()
tm_reclaim_thread()
giveup_all()
return early since FP/VMX/VSX=0
/* ckpt MSR not updated (Incorrect) */
tm_reclaim()
/* thread_struct ckpt FP regs contain junk (OK) */
/* Sees ckpt MSR FP=1 (Incorrect) */
no memcpy() performed
/* thread_struct ckpt FP regs not fixed (Incorrect) */
tm_recheckpoint()
/* Put junk in hardware checkpoint FP regs */
....
< -----
Return to userspace
with MSR TM=1 FP=1
with junk in the FP TM checkpoint
TM rollback
reads FP junk
This is a data integrity problem for the current process as the FP
registers are corrupted. It's also a security problem as the FP
registers from one process may be leaked to another.
This patch moves up check_if_tm_restore_required() in giveup_all() to
ensure thread->ckpt_regs.msr is updated correctly.
A simple testcase to replicate this will be posted to
tools/testing/selftests/powerpc/tm/tm-poison.c
Similarly for VMX.
This fixes CVE-2019-15030.
Fixes: f48e91e87e67 ("powerpc/tm: Fix FP and VMX register corruption")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190904045529.23002-1-gromero@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9ee5e04fd77898208c51b1395fa0b5e8536f9b6 upstream.
Commit ebb9d30a6a74 ("powerpc/mm: any thread in one core can be the
first to setup TLB1") removed the need to know the cpu_id in
early_init_this_mmu(), but the call to smp_processor_id() which was
marked __maybe_used remained.
Since commit ed1cd6deb013 ("powerpc: Activate CONFIG_THREAD_INFO_IN_TASK")
thread_info cannot be reached before MMU is properly set up.
Drop this stale call to smp_processor_id() which makes SMP hang when
CONFIG_PREEMPT is set.
Fixes: ebb9d30a6a74 ("powerpc/mm: any thread in one core can be the first to setup TLB1")
Fixes: ed1cd6deb013 ("powerpc: Activate CONFIG_THREAD_INFO_IN_TASK")
Cc: stable@vger.kernel.org # v5.1+
Reported-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bef479514f4c08329fa649f67735df8918bc0976.1565268248.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 29d9a0b50736768f042752070e5cdf4e4d4c00df upstream.
Commit
a90118c445cc ("x86/boot: Save fields explicitly, zero out everything else")
now zeroes the secure boot setting information (enabled/disabled/...)
passed by the boot loader or by the kernel's EFI handover mechanism.
The problem manifests itself with signed kernels using the EFI handoff
protocol with grub and the kernel loses the information whether secure
boot is enabled in the firmware, i.e., the log message "Secure boot
enabled" becomes "Secure boot could not be determined".
efi_main() arch/x86/boot/compressed/eboot.c sets this field early but it
is subsequently zeroed by the above referenced commit.
Include boot_params.secure_boot in the preserve field list.
[ bp: restructure commit message and massage. ]
Fixes: a90118c445cc ("x86/boot: Save fields explicitly, zero out everything else")
Signed-off-by: John S. Gruber <JohnSGruber@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/CAPotdmSPExAuQcy9iAHqX3js_fc4mMLQOTr5RBGvizyCOPcTQQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 950b07c14e8c59444e2359f15fd70ed5112e11a0 ]
This reverts commit 558682b5291937a70748d36fd9ba757fb25b99ae.
Chris Wilson reports that it breaks his CPU hotplug test scripts. In
particular, it breaks offlining and then re-onlining the boot CPU, which
we treat specially (and the BIOS does too).
The symptoms are that we can offline the CPU, but it then does not come
back online again:
smpboot: CPU 0 is now offline
smpboot: Booting Node 0 Processor 0 APIC 0x0
smpboot: do_boot_cpu failed(-1) to wakeup CPU#0
Thomas says he knows why it's broken (my personal suspicion: our magic
handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix
is to just revert it, since we've never touched the LDR bits before, and
it's not worth the risk to do anything else at this stage.
[ Hotpluging of the boot CPU is special anyway, and should be off by
default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the
cpu0_hotplug kernel parameter.
In general you should not do it, and it has various known limitations
(hibernate and suspend require the boot CPU, for example).
But it should work, even if the boot CPU is special and needs careful
treatment - Linus ]
Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bandan Das <bsd@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
find_trampoline_placement()
[ Upstream commit c96e8483cb2da6695c8b8d0896fe7ae272a07b54 ]
Gustavo noticed that 'new' can be left uninitialized if 'bios_start'
happens to be less or equal to 'entry->addr + entry->size'.
Initialize the variable at the begin of the iteration to the current value
of 'bios_start'.
Fixes: 0a46fff2f910 ("x86/boot/compressed/64: Fix boot on machines with broken E820 table")
Reported-by: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190826133326.7cxb4vbmiawffv2r@box
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a46fff2f9108c2c44218380a43a736cf4612541 ]
BIOS on Samsung 500C Chromebook reports very rudimentary E820 table that
consists of 2 entries:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] usable
BIOS-e820: [mem 0x00000000fffff000-0x00000000ffffffff] reserved
It breaks logic in find_trampoline_placement(): bios_start lands on the
end of the first 4k page and trampoline start gets placed below 0.
Detect underflow and don't touch bios_start for such cases. It makes
kernel ignore E820 table on machines that doesn't have two usable pages
below BIOS_START_MAX.
Fixes: 1b3a62643660 ("x86/boot/compressed/64: Validate trampoline placement against E820")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203463
Link: https://lkml.kernel.org/r/20190813131654.24378-1-kirill.shutemov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
I incorrectly merged commit 31a2fbb390fe ("x86/ptrace: Fix possible
spectre-v1 in ptrace_get_debugreg()") when backporting it, as was
graciously pointed out at
https://grsecurity.net/teardown_of_a_failed_linux_lts_spectre_fix.php
Resolve the upstream difference with the stable kernel merge to properly
protect things.
Reported-by: Brad Spengler <spender@grsecurity.net>
Cc: Dianzhang Chen <dianzhangchen0@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <bp@alien8.de>
Cc: <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ddfd151f3def9258397fcde7a372205a2d661903 upstream.
H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from
a guest. Although we verify correctness of TCEs before we do anything
with the existing tables, there is a small window when a check in
kvmppc_tce_validate might pass and right after that the guest alters
the page of TCEs, causing an early exit from the handler and leaving
srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap)
(real mode) locked.
This fixes the bug by jumping to the common exit code with an appropriate
unlock.
Cc: stable@vger.kernel.org # v4.11+
Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 558682b5291937a70748d36fd9ba757fb25b99ae upstream.
Although APIC initialization will typically clear out the LDR before
setting it, the APIC cleanup code should reset the LDR.
This was discovered with a 32-bit KVM guest jumping into a kdump
kernel. The stale bits in the LDR triggered a bug in the KVM APIC
implementation which caused the destination mapping for VCPUs to be
corrupted.
Note that this isn't intended to paper over the KVM APIC bug. The kernel
has to clear the LDR when resetting the APIC registers except when X2APIC
is enabled.
This lacks a Fixes tag because missing to clear LDR goes way back into pre
git history.
[ tglx: Made x2apic_enabled a function call as required ]
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190826101513.5080-3-bsd@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bae3a8d3308ee69a7dbdf145911b18dfda8ade0d upstream.
Legacy apic init uses bigsmp for smp systems with 8 and more CPUs. The
bigsmp APIC implementation uses physical destination mode, but it
nevertheless initializes LDR and DFR. The LDR even ends up incorrectly with
multiple bit being set.
This does not cause a functional problem because LDR and DFR are ignored
when physical destination mode is active, but it triggered a problem on a
32-bit KVM guest which jumps into a kdump kernel.
The multiple bits set unearthed a bug in the KVM APIC implementation. The
code which creates the logical destination map for VCPUs ignores the
disabled state of the APIC and ends up overwriting an existing valid entry
and as a result, APIC calibration hangs in the guest during kdump
initialization.
Remove the bogus LDR/DFR initialization.
This is not intended to work around the KVM APIC bug. The LDR/DFR
ininitalization is wrong on its own.
The issue goes back into the pre git history. The fixes tag is the commit
in the bitkeeper import which introduced bigsmp support in 2003.
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: db7b9e9f26b8 ("[PATCH] Clustered APIC setup for >8 CPU systems")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190826101513.5080-2-bsd@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7af0145067bc429a09ac4047b167c0971c9f0dc7 upstream.
ftrace does not use text_poke() for enabling trace functionality. It uses
its own mechanism and flips the whole kernel text to RW and back to RO.
The CPA rework removed a loop based check of 4k pages which tried to
preserve a large page by checking each 4k page whether the change would
actually cover all pages in the large page.
This resulted in endless loops for nothing as in testing it turned out that
it actually never preserved anything. Of course testing missed to include
ftrace, which is the one and only case which benefitted from the 4k loop.
As a consequence enabling function tracing or ftrace based kprobes results
in a full 4k split of the kernel text, which affects iTLB performance.
The kernel RO protection is the only valid case where this can actually
preserve large pages.
All other static protections (RO data, data NX, PCI, BIOS) are truly
static. So a conflict with those protections which results in a split
should only ever happen when a change of memory next to a protected region
is attempted. But these conflicts are rightfully splitting the large page
to preserve the protected regions. In fact a change to the protected
regions itself is a bug and is warned about.
Add an exception for the static protection check for kernel text RO when
the to be changed region spawns a full large page which allows to preserve
the large mappings. This also prevents the syslog to be spammed about CPA
violations when ftrace is used.
The exception needs to be removed once ftrace switched over to text_poke()
which avoids the whole issue.
Fixes: 585948f4f695 ("x86/mm/cpa: Avoid the 4k pages check completely")
Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908282355340.1938@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9212ec7d8357ea630031e89d0d399c761421c83b upstream.
32-bit processes running on a 64-bit kernel are not always detected
correctly, causing the process to crash when uretprobes are installed.
The reason for the crash is that in_ia32_syscall() is used to determine the
process's mode, which only works correctly when called from a syscall.
In the case of uretprobes, however, the function is called from a exception
and always returns 'false' on a 64-bit kernel. In consequence this leads to
corruption of the process's return address.
Fix this by using user_64bit_mode() instead of in_ia32_syscall(), which
is correct in any situation.
[ tglx: Add a comment and the following historical info ]
This should have been detected by the rename which happened in commit
abfb9498ee13 ("x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall()")
which states in the changelog:
The is_ia32_task()/is_x32_task() function names are a big misnomer: they
suggests that the compat-ness of a system call is a task property, which
is not true, the compatness of a system call purely depends on how it
was invoked through the system call layer.
.....
and then it went and blindly renamed every call site.
Sadly enough this was already mentioned here:
8faaed1b9f50 ("uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and
arch_uretprobe_hijack_return_addr()")
where the changelog says:
TODO: is_ia32_task() is not what we actually want, TS_COMPAT does
not necessarily mean 32bit. Fortunately syscall-like insns can't be
probed so it actually works, but it would be better to rename and
use is_ia32_frame().
and goes all the way back to:
0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions")
Oh well. 7+ years until someone actually tried a uretprobe on a 32bit
process on a 64bit kernel....
Fixes: 0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions")
Signed-off-by: Sebastian Mayr <me@sam.st>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190728152617.7308-1-me@sam.st
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Greg Kurz
Will Deacon
Tianyu Lan
Peter Zijlstra
Geert Uytterhoeven
Kim Phillips
Josh Hunt
zhaoyang
Anup Patel
Thomas Gleixner
Doug Berger
Ilya Leoshkevich
Tony Lindgren
Janusz Krzysztofik
Faiz Abbas
Emmanuel Vadot
Neil Armstrong
Aneesh Kumar K.V
Linus Torvalds
Liran Alon
Jim Mattson
Mimi Zohar
Junichi Nomura
Suraj Jitindar Singh
Steve Wahl
Paolo Bonzini
Sean Christopherson
Fuqian Huang
Thomas Huth
Igor Mammedov
Arnd Bergmann
Gustavo Romero
Christophe Leroy
John S. Gruber
Kirill A. Shutemov
Kirill A. Shutemov
Greg Kroah-Hartman
Alexey Kardashevskiy
Bandan Das
Sebastian Mayr