Age | Commit message (Collapse) | Author |
|
schedule must not be explicitly called while KUAP is unlocked, because
the AMR register will not be saved across the context switch on
64s (preemption is allowed because that is driven by interrupts which do
save the AMR).
exit_vmx_usercopy() runs inside an unlocked user access region, and it
calls preempt_enable() which will call schedule() if need_resched() was
set while non-preemptible. This can cause tasks to run unprotected when
the should not, and can cause the user copy to be improperly blocked
when scheduling back to it.
Fix this by avoiding the explicit resched for preempt kernels by
generating an interrupt to reschedule the context if need_resched() got
set.
Reported-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221013151647.1857994-3-npiggin@gmail.com
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
This is the 5.19.17 stable release
# gpg: Signature made Mon 24 Oct 2022 03:59:33 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
commit a4cb3651a174366cc85a677da9e3681fbe97fdae upstream.
It's possible for an interrupt returning to an irqs-disabled context to
lose a pending soft-masked irq because it branches to part of the exit
code for irqs-enabled contexts, which is meant to clear only the
PACA_IRQS_HARD_DIS flag from PACAIRQHAPPENED by zeroing the byte. This
just looks like a simple thinko from a recent commit (if there was no
hard mask pending, there would be no reason to clear it anyway).
This also adds comment to the code that actually does need to clear the
flag.
Fixes: e485f6c751e0a ("powerpc/64/interrupt: Fix return to masked context after hard-mask irq becomes pending")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221013064418.1311104-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5c3d5ecf48ab06c709c012bf1e8f0c91e1fcd7ad ]
With this set the SOF/ITP counter is based on ref_clk when 2.0 ports are
suspended.
snps,dis-u2-freeclk-exists-quirk can be removed as
snps,gfladj-refclk-lpm-sel also clears the free running clock configuration
bit.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220915062855.751881-4-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 823f606ab6b4759a1faf0388abcf4fb0776710d2 ]
In case CONFIG_KASAN_VMALLOC=y kasan_populate_vmalloc() allocates the
shadow pages dynamically. But even worse is that kasan_release_vmalloc()
releases them, which is not compatible with create_mapping() of
MODULES_VADDR..MODULES_END range:
BUG: Bad page state in process kworker/9:1 pfn:2068b
page:e5e06160 refcount:0 mapcount:0 mapping:00000000 index:0x0
flags: 0x1000(reserved)
raw: 00001000 e5e06164 e5e06164 00000000 00000000 00000000 ffffffff 00000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x1000(reserved)
Modules linked in: ip_tables
CPU: 9 PID: 154 Comm: kworker/9:1 Not tainted 5.4.188-... #1
Hardware name: LSI Axxia AXM55XX
Workqueue: events do_free_init
unwind_backtrace
show_stack
dump_stack
bad_page
free_pcp_prepare
free_unref_page
kasan_depopulate_vmalloc_pte
__apply_to_page_range
apply_to_existing_page_range
kasan_release_vmalloc
__purge_vmap_area_lazy
_vm_unmap_aliases.part.0
__vunmap
do_free_init
process_one_work
worker_thread
kthread
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 752ec621ef5c30777958cc5eb5f1cf394f7733f4 ]
Because an exception stack frame is not created in the exception entry,
save_trace() does special handling for the exception PC, but this is
only needed when CONFIG_FRAME_POINTER_UNWIND=y. When
CONFIG_ARM_UNWIND=y, unwind annotations have been added to the exception
entry and save_trace() will repeatedly save the exception PC:
[0x7f000090] hrtimer_hander+0x8/0x10 [hrtimer]
[0x8019ec50] __hrtimer_run_queues+0x18c/0x394
[0x8019f760] hrtimer_run_queues+0xbc/0xd0
[0x8019def0] update_process_times+0x34/0x80
[0x801ad2a4] tick_periodic+0x48/0xd0
[0x801ad3dc] tick_handle_periodic+0x1c/0x7c
[0x8010f2e0] twd_handler+0x30/0x40
[0x80177620] handle_percpu_devid_irq+0xa0/0x23c
[0x801718d0] generic_handle_domain_irq+0x24/0x34
[0x80502d28] gic_handle_irq+0x74/0x88
[0x8085817c] generic_handle_arch_irq+0x58/0x78
[0x80100ba8] __irq_svc+0x88/0xc8
[0x80108114] arch_cpu_idle+0x38/0x3c
[0x80108114] arch_cpu_idle+0x38/0x3c <==== duplicate saved exception PC
[0x80861bf8] default_idle_call+0x38/0x130
[0x8015d5cc] do_idle+0x150/0x214
[0x8015d978] cpu_startup_entry+0x18/0x1c
[0x808589c0] rest_init+0xd8/0xdc
[0x80c00a44] arch_post_acpi_subsys_init+0x0/0x8
We can move the special handling of the exception PC in save_trace() to
the unwind_frame() of the frame pointer unwinder.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Linus Waleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5854e4d8530e6ed4c2532a71a6b0474e199d44dd ]
When using the frame pointer unwinder, it was found that the stack trace
output of stack_trace_save() is incomplete if the stack contains
call_with_stack():
[0x7f00002c] dump_stack_task+0x2c/0x90 [hrtimer]
[0x7f0000a0] hrtimer_hander+0x10/0x18 [hrtimer]
[0x801a67f0] __hrtimer_run_queues+0x1b0/0x3b4
[0x801a7350] hrtimer_run_queues+0xc4/0xd8
[0x801a597c] update_process_times+0x3c/0x88
[0x801b5a98] tick_periodic+0x50/0xd8
[0x801b5bf4] tick_handle_periodic+0x24/0x84
[0x8010ffc4] twd_handler+0x38/0x48
[0x8017d220] handle_percpu_devid_irq+0xa8/0x244
[0x80176e9c] generic_handle_domain_irq+0x2c/0x3c
[0x8052e3a8] gic_handle_irq+0x7c/0x90
[0x808ab15c] generic_handle_arch_irq+0x60/0x80
[0x8051191c] call_with_stack+0x1c/0x20
For the frame pointer unwinder, unwind_frame() checks stackframe::fp by
stackframe::sp. Since call_with_stack() switches the SP from one stack
to another, stackframe::fp and stackframe: :sp will point to different
stacks, so we can no longer check stackframe::fp by stackframe::sp. Skip
checking stackframe::fp at this point to avoid this problem.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Linus Waleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6effe295e1a87408033c29dbcea9d5a5c8b937d5 ]
This allows the userspace to notice that there's not enough
current provided to charge the battery, and also fixes issues
with 0% SOC values being considered invalid.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eef2c0217e02b6c7ed5b10b82ea944127145e113 ]
It turns out that it is not necessary to declare the VSELECT signal as
GPIO and let the PMIC driver set it to a fixed high level. This switches
the voltage between 3.3V and 1.8V by setting the PMIC register for LDO5
accordingly.
Instead we can do it like other boards already do and simply mux the
VSELECT signal of the USDHC interface to the pin. This makes sure that
the correct voltage is selected by setting the PMIC's SD_VSEL input
to high or low accordingly.
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd2dd7077c7498765e7326c1b7f34bde85f1a975 ]
This fixes the following warning:
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi:309: check: Please don't use multiple
blank lines
While at it, use tabs indent for some pinctrl entries.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 218db824a7519856d0eaaeb5c41ca504ed550210 ]
This fixes the following error:
arch/arm/boot/dts/imx6sl.dtsi:714: error: code indent should use tabs
where possible
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 415432c008b2bce8138841356ba444631cabaa50 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7492a83ed9b7a151e2dd11d64b06da7a7f0fa7f9 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 60c9213a1d9941a8b33db570796c3f9be8984974 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 088fe5237435ee2f7ed4450519b2ef58b94c832f ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@940000: '#address-cells' is a required property
sram@940000: '#size-cells' is a required property
sram@940000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f5848b95633d598bacf0500e0108dc5961af88c0 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b11d083c5dcec7c42fe982c854706d404ddd3a5f ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ]
Use the general touchscreen method to config the max pressure for
touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for
ABS_PRESSURE, when config the same max and min value, weston will
meet the following issue,
[17:19:39.183] event1 - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[17:19:39.183] event1 - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE
[17:19:39.183] event1 - ADS7846 Touchscreen: was rejected
[17:19:39.183] event1 - not using input device '/dev/input/event1'
This will then cause the APP weston-touch-calibrator can't list touch devices.
root@imx6ul7d:~# weston-touch-calibrator
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
No devices listed.
And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max"
belong to the deprecated properties, so remove them. Also for "ti,x-min",
"ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default
value in driver, so are redundant, also remove here.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c9d38ff7080b2c4fa6786b82210fa13115895aae ]
In most cases this is related to fsl,err006687-workaround-present, which
requires a GPIO interrupt next a GIC interrupt.
This fixes the dtbs_check warning:
imx6dl-mba6a.dtb: ethernet@2188000: More than one condition true in oneOf schema:
{'$filename': 'Documentation/devicetree/bindings/net/fsl,fec.yaml',
[...]
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 19c02415da2345d0dda2b5c4495bc17cc14b18b5 ]
Allocate bpf_dispatcher with bpf_prog_pack_alloc so that bpf_dispatcher
can share pages with bpf programs.
arch_prepare_bpf_dispatcher() is updated to provide a RW buffer as working
area for arch code to write to.
This also fixes CPA W^X warnning like:
CPA refuse W^X violation: 8000000000000163 -> 0000000000000163 range: ...
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220926184739.3512547-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8d1d163604bd1e600b062fb00de5dc42baa355f ]
The APIC supports two modes, legacy APIC (or xAPIC), and Extended APIC
(or x2APIC). X2APIC mode is mostly compatible with legacy APIC, but
it disables the memory-mapped APIC interface in favor of one that uses
MSRs. The APIC mode is controlled by the EXT bit in the APIC MSR.
The MMIO/xAPIC interface has some problems, most notably the APIC LEAK
[1]. This bug allows an attacker to use the APIC MMIO interface to
extract data from the SGX enclave.
Introduce support for a new feature that will allow the BIOS to lock
the APIC in x2APIC mode. If the APIC is locked in x2APIC mode and the
kernel tries to disable the APIC or revert to legacy APIC mode a GP
fault will occur.
Introduce support for a new MSR (IA32_XAPIC_DISABLE_STATUS) and handle
the new locked mode when the LEGACY_XAPIC_DISABLED bit is set by
preventing the kernel from trying to disable the x2APIC.
On platforms with the IA32_XAPIC_DISABLE_STATUS MSR, if SGX or TDX are
enabled the LEGACY_XAPIC_DISABLED will be set by the BIOS. If
legacy APIC is required, then it SGX and TDX need to be disabled in the
BIOS.
[1]: https://aepicleak.com/aepicleak.pdf
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Link: https://lkml.kernel.org/r/20220816231943.1152579-1-daniel.sneddon@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f9781bb18ed828e7b83b7bac4a4ad7cd497ee7d7 ]
When memory poison consumption machine checks fire, MCE notifier
handlers like nfit_handle_mce() record the impacted physical address
range which is reported by the hardware in the MCi_MISC MSR. The error
information includes data about blast radius, i.e. how many cachelines
did the hardware determine are impacted. A recent change
7917f9cdb503 ("acpi/nfit: rely on mce->misc to determine poison granularity")
updated nfit_handle_mce() to stop hard coding the blast radius value of
1 cacheline, and instead rely on the blast radius reported in 'struct
mce' which can be up to 4K (64 cachelines).
It turns out that apei_mce_report_mem_error() had a similar problem in
that it hard coded a blast radius of 4K rather than reading the blast
radius from the error information. Fix apei_mce_report_mem_error() to
convey the proper poison granularity.
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/7ed50fd8-521e-cade-77b1-738b8bfb8502@oracle.com
Link: https://lore.kernel.org/r/20220826233851.1319100-1-jane.chu@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e1730842f142add55dc658929221521a9ea62b6 ]
Clang produces a false positive when building with CONFIG_FORTIFY_SOURCE=y
and CONFIG_UBSAN_BOUNDS=y when operating on an array with a dynamic
offset. Work around this by using a direct assignment of an empty
instance. Avoids this warning:
../include/linux/fortify-string.h:309:4: warning: call to __write_overflow_field declared with 'warn
ing' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wat
tribute-warning]
__write_overflow_field(p_size_field, size);
^
which was isolated to the memset() call in xen_load_idt().
Note that this looks very much like another bug that was worked around:
https://github.com/ClangBuiltLinux/linux/issues/1592
Cc: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/lkml/41527d69-e8ab-3f86-ff37-6b298c01d5bc@oracle.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b64daf413acd86c2c13f5443f6b4ef3690c8061 ]
The .data.rel.ro.local section has the same semantics as .data.rel.ro
here, so include it in the .rodata section of the decompressor.
Additionally since the .printk_index section isn't usable outside of
the core kernel, discard it in the decompressor. Avoids these warnings:
arm-linux-gnueabi-ld: warning: orphan section `.data.rel.ro.local' from `arch/arm/boot/compressed/fdt_rw.o' being placed in section `.data.rel.ro.local'
arm-linux-gnueabi-ld: warning: orphan section `.printk_index' from `arch/arm/boot/compressed/fdt_rw.o' being placed in section `.printk_index'
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-mm/202209080545.qMIVj7YM-lkp@intel.com
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0dedcf6e3301836eb70cfa649052e7ce4fcd13ba ]
Clang is especially sensitive about argument type matching when using
__overloaded functions (like memcmp(), etc). Help it see that function
pointers are just "void *". Avoids this error:
arch/mips/bcm47xx/prom.c:89:8: error: no matching function for call to 'memcmp'
if (!memcmp(prom_init, prom_init + mem, 32))
^~~~~~
include/linux/string.h:156:12: note: candidate function not viable: no known conversion from 'void (void)' to 'const void *' for 1st argument extern int memcmp(const void *,const void *,__kernel_size_t);
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: "Rafał Miłecki" <zajec5@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: llvm@lists.linux.dev
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202209080652.sz2d68e5-lkp@intel.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f3e5d9e53e74d77e711a2c90a91a8b0836a9e0b3 ]
Generally the hypervisor decides to allocate a window on different
VAS instances. But if user space wishes to allocate on the current VAS
instance where the process is executing, the kernel has to pass
associativity domain IDs to allocate VAS window HCALL.
To determine the associativity domain IDs for the current CPU,
smp_processor_id() is passed to node associativity HCALL which may
return H_P2 (-55) error during DLPAR CPU event. This is because Linux
CPU numbers (smp_processor_id()) are not the same as the hypervisor's
view of CPU numbers.
Fix the issue by passing hard_smp_processor_id() with
VPHN_FLAG_VCPU flag (PAPR 14.11.6.1 H_HOME_NODE_ASSOCIATIVITY).
Fixes: b22f2d88e435 ("powerpc/pseries/vas: Integrate API with open/close windows")
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Update change log to mention Linux vs HV CPU numbers]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/55380253ea0c11341824cd4c0fc6bbcfc5752689.camel@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 97f88a3d723162781d6cbfdc7b9617eefab55b19 ]
I found a null pointer reference in arch_prepare_kprobe():
# echo 'p cmdline_proc_show' > kprobe_events
# echo 'p cmdline_proc_show+16' >> kprobe_events
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000000050bfc
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 122 Comm: sh Not tainted 6.0.0-rc3-00007-gdcf8e5633e2e #10
NIP: c000000000050bfc LR: c000000000050bec CTR: 0000000000005bdc
REGS: c0000000348475b0 TRAP: 0300 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 88002444 XER: 20040006
CFAR: c00000000022d100 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0
...
NIP arch_prepare_kprobe+0x10c/0x2d0
LR arch_prepare_kprobe+0xfc/0x2d0
Call Trace:
0xc0000000012f77a0 (unreliable)
register_kprobe+0x3c0/0x7a0
__register_trace_kprobe+0x140/0x1a0
__trace_kprobe_create+0x794/0x1040
trace_probe_create+0xc4/0xe0
create_or_delete_trace_kprobe+0x2c/0x80
trace_parse_run_command+0xf0/0x210
probes_write+0x20/0x40
vfs_write+0xfc/0x450
ksys_write+0x84/0x140
system_call_exception+0x17c/0x3a0
system_call_vectored_common+0xe8/0x278
--- interrupt: 3000 at 0x7fffa5682de0
NIP: 00007fffa5682de0 LR: 0000000000000000 CTR: 0000000000000000
REGS: c000000034847e80 TRAP: 3000 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 44002408 XER: 00000000
The address being probed has some special:
cmdline_proc_show: Probe based on ftrace
cmdline_proc_show+16: Probe for the next instruction at the ftrace location
The ftrace-based kprobe does not generate kprobe::ainsn::insn, it gets
set to NULL. In arch_prepare_kprobe() it will check for:
...
prev = get_kprobe(p->addr - 1);
preempt_enable_no_resched();
if (prev && ppc_inst_prefixed(ppc_inst_read(prev->ainsn.insn))) {
...
If prev is based on ftrace, 'ppc_inst_read(prev->ainsn.insn)' will occur
with a null pointer reference. At this point prev->addr will not be a
prefixed instruction, so the check can be skipped.
Check if prev is ftrace-based kprobe before reading 'prev->ainsn.insn'
to fix this problem.
Fixes: b4657f7650ba ("powerpc/kprobes: Don't allow breakpoints on suffixes")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
[mpe: Trim oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220923093253.177298-1-lihuafei1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37b9345ce7f4ab17538ea62def6f6d430f091355 ]
Commit 2eb28006431c ("powerpc/e500v2: Add Power ISA properties to comply
with ePAPR 1.1") introduced new include file e500v2_power_isa.dtsi and
should have used it for all e500v2 platforms. But apparently it was used
also for e500v1 platforms mpc8540, mpc8541, mpc8555 and mpc8560.
e500v1 cores compared to e500v2 do not support double precision floating
point SPE instructions. Hence power-isa-sp.fd should not be set on e500v1
platforms, which is in e500v2_power_isa.dtsi include file.
Fix this issue by introducing a new e500v1_power_isa.dtsi include file and
use it in all e500v1 device tree files.
Fixes: 2eb28006431c ("powerpc/e500v2: Add Power ISA properties to comply with ePAPR 1.1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902212103.22534-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
becomes pending
[ Upstream commit e485f6c751e0a969327336c635ca602feea117f0 ]
If a synchronous interrupt (e.g., hash fault) is taken inside an
irqs-disabled region which has MSR[EE]=1, then an asynchronous interrupt
that is PACA_IRQ_MUST_HARD_MASK (e.g., PMI) is taken inside the
synchronous interrupt handler, then the synchronous interrupt will
return with MSR[EE]=1 and the asynchronous interrupt fires again.
If the asynchronous interrupt is a PMI and the original context does not
have PMIs disabled (only Linux IRQs), the asynchronous interrupt will
fire despite having the PMI marked soft pending. This can confuse the
perf code and cause warnings.
This patch changes the interrupt return so that irqs-disabled MSR[EE]=1
contexts will be returned to with MSR[EE]=0 if a PACA_IRQ_MUST_HARD_MASK
interrupt has become pending in the meantime.
The longer explanation for what happens:
1. local_irq_disable()
2. Hash fault interrupt fires, do_hash_fault handler runs
3. interrupt_enter_prepare() sets IRQS_ALL_DISABLED
4. interrupt_enter_prepare() sets MSR[EE]=1
5. PMU interrupt fires, masked handler runs
6. Masked handler marks PMI pending
7. Masked handler returns with PACA_IRQ_HARD_DIS set, MSR[EE]=0
8. do_hash_fault interrupt return handler runs
9. interrupt_exit_kernel_prepare() clears PACA_IRQ_HARD_DIS
10. interrupt returns with MSR[EE]=1
11. PMU interrupt fires, perf handler runs
Fixes: 4423eb5ae32e ("powerpc/64/interrupt: make normal synchronous interrupts enable MSR[EE] if possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 799f7063c7645f9a751d17f5dfd73b952f962cd2 ]
This prevents interrupts in early boot (e.g., program check) from
enabling MSR[EE], potentially causing endian mismatch or other
crashes when reporting early boot traps.
Fixes: 4423eb5ae32ec ("powerpc/64/interrupt: make normal synchronous interrupts enable MSR[EE] if possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-3-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58ec7f06b74e0d6e76c4110afce367c8b5f0837d ]
Big-endian GENERIC_CPU supports 970, but builds with -mcpu=power5.
POWER5 is ISA v2.02 whereas 970 is v2.01 plus Altivec. 2.02 added
the popcntb instruction which a compiler might use.
Use -mcpu=power4.
Fixes: 471d7ff8b51b ("powerpc/64s: Remove POWER4 support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921014103.587954-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea9da788a61e47e7ab9cbad397453e51cd82ac0d ]
Section 1.9 of TLFS v6.0b says:
"All structures are padded in such a way that fields are aligned
naturally (that is, an 8-byte field is aligned to an offset of 8 bytes
and so on)".
'struct enlightened_vmcs' has a glitch:
...
struct {
u32 nested_flush_hypercall:1; /* 836: 0 4 */
u32 msr_bitmap:1; /* 836: 1 4 */
u32 reserved:30; /* 836: 2 4 */
} hv_enlightenments_control; /* 836 4 */
u32 hv_vp_id; /* 840 4 */
u64 hv_vm_id; /* 844 8 */
u64 partition_assist_page; /* 852 8 */
...
And the observed values in 'partition_assist_page' make no sense at
all. Fix the layout by padding the structure properly.
Fixes: 68d1eb72ee99 ("x86/hyper-v: define struct hv_enlightened_vmcs and clean field bits")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-2-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 016ff72bd2090903715c0f9422a44afbb966f4ee ]
As reported[1] by Arnd, the arch-specific fadvise64_64 and fallocate
compatibility handlers assume parameters are passed with 32-bit
big-endian ABI. This affects the assignment of odd-even parameter pairs
to the high or low words of a 64-bit syscall parameter.
Fix fadvise64_64 fallocate compat handlers to correctly swap upper/lower
32 bits conditioned on endianness.
A future patch will replace the arch-specific compat fallocate with an
asm-generic implementation. This patch is intended for ease of
back-port.
[1]: https://lore.kernel.org/all/be29926f-226e-48dc-871a-e29a54e80583@www.fastmail.com/
Fixes: 57f48b4b74e7 ("powerpc/compat_sys: swap hi/lo parts of 64-bit syscall args in LE mode")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-9-rmclure@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 71a92e99c47900cc164620948b3863382cec4f1a ]
After using 'np' returned by of_find_node_by_path(), of_node_put()
need be called to decrease the refcount.
Fixes: 11fe909d2362 ("powerpc/powernv: Add OPAL exports attributes to sysfs")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220906141703.118192-1-zhengyongjun3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 110a1fcb6c4d55144d8179983a475f17a1d6f832 ]
In pci_add_device_node_info(), use of_node_put() to drop the reference
to 'parent' returned by of_get_parent() to keep refcount balance.
Fixes: cca87d303c85 ("powerpc/pci: Refactor pci_dn")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20220701131750.240170-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit def435c04ee984a5f9ed2711b2bfe946936c6a21 ]
In fsl_setup_msi_irqs(), use of_node_put() to drop the reference
returned by of_parse_phandle().
Fixes: 895d603f945ba ("powerpc/fsl_msi: add support for the fsl, msi property in PCI nodes")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220704145233.278539-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cfe0d370e0788625ce0df3239aad07a2506c1796 ]
When building with a recent version of clang, there are a couple of
errors around the call to module_init():
arch/powerpc/math-emu/math_efp.c:927:1: error: type specifier missing, defaults to 'int'; ISO C99 and later do not support implicit int [-Wimplicit-int]
module_init(spe_mathemu_init);
^
int
arch/powerpc/math-emu/math_efp.c:927:13: error: a parameter list without types is only allowed in a function definition
module_init(spe_mathemu_init);
^
2 errors generated.
module_init() is a macro, which is not getting expanded because module.h
is not included in this file. Add the include so that the macro can
expand properly, clearing up the build failure.
Fixes: ac6f120369ff ("powerpc/85xx: Workaroudn e500 CPU erratum A005")
[chleroy: added fixes tag]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/8403854a4c187459b2f4da3537f51227b70b9223.1662134272.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa398d88aea4ec863bd7aea35d5035a37096dc59 ]
My commit to add PAPR_SCM to pseries_defconfig failed to add the
required dependencies, meaning the driver doesn't get built.
Add the required LIBNVDIMM=m.
Fixes: d6481a7195df ("powerpc/configs: Add PAPR_SCM to pseries_defconfig")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220901014253.252927-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a08137bd1e0a7ce951dce9ce4a83e39d379b6e1b ]
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when
trying to power up the bus, therefore the GPIO in DTS must be marked as
"active high". This will be important when EHCI driver is converted to
gpiod API that respects declared polarities.
Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8cfb08575c6d4585f1ce0deeb189e5c824776b04 ]
Li Huafei reports that mcount-based ftrace with module PLTs was broken
by commit:
a6253579977e4c6f ("arm64: ftrace: consistently handle PLTs.")
When a module PLTs are used and a module is loaded sufficiently far away
from the kernel, we'll create PLTs for any branches which are
out-of-range. These are separate from the special ftrace trampoline
PLTs, which the module PLT code doesn't directly manipulate.
When mcount is in use this is a problem, as each mcount callsite in a
module will be initialized to point to a module PLT, but since commit
a6253579977e4c6f ftrace_make_nop() will assume that the callsite has
been initialized to point to the special ftrace trampoline PLT, and
ftrace_find_callable_addr() rejects other cases.
This means that when ftrace tries to initialize a callsite via
ftrace_make_nop(), the call to ftrace_find_callable_addr() will find
that the `_mcount` stub is out-of-range and is not handled by the ftrace
PLT, resulting in a splat:
| ftrace_test: loading out-of-tree module taints kernel.
| ftrace: no module PLT for _mcount
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<ffff800029180014>] 0xffff800029180014
| actual: 44:00:00:94
| Initializing ftrace call sites
| ftrace record flags: 2000000
| (0)
| expected tramp: ffff80000802eb3c
| ------------[ cut here ]------------
| WARNING: CPU: 3 PID: 157 at kernel/trace/ftrace.c:2120 ftrace_bug+0x94/0x270
| Modules linked in:
| CPU: 3 PID: 157 Comm: insmod Tainted: G O 6.0.0-rc6-00151-gcd722513a189-dirty #22
| Hardware name: linux,dummy-virt (DT)
| pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x94/0x270
| lr : ftrace_bug+0x21c/0x270
| sp : ffff80000b2bbaf0
| x29: ffff80000b2bbaf0 x28: 0000000000000000 x27: ffff0000c4d38000
| x26: 0000000000000001 x25: ffff800009d7e000 x24: ffff0000c4d86e00
| x23: 0000000002000000 x22: ffff80000a62b000 x21: ffff8000098ebea8
| x20: ffff0000c4d38000 x19: ffff80000aa24158 x18: ffffffffffffffff
| x17: 0000000000000000 x16: 0a0d2d2d2d2d2d2d x15: ffff800009aa9118
| x14: 0000000000000000 x13: 6333626532303830 x12: 3030303866666666
| x11: 203a706d61727420 x10: 6465746365707865 x9 : 3362653230383030
| x8 : c0000000ffffefff x7 : 0000000000017fe8 x6 : 000000000000bff4
| x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : 0000000000000001
| x2 : ad2cb14bb5438900 x1 : 0000000000000000 x0 : 0000000000000022
| Call trace:
| ftrace_bug+0x94/0x270
| ftrace_process_locs+0x308/0x430
| ftrace_module_init+0x44/0x60
| load_module+0x15b4/0x1ce8
| __do_sys_init_module+0x1ec/0x238
| __arm64_sys_init_module+0x24/0x30
| invoke_syscall+0x54/0x118
| el0_svc_common.constprop.4+0x84/0x100
| do_el0_svc+0x3c/0xd0
| el0_svc+0x1c/0x50
| el0t_64_sync_handler+0x90/0xb8
| el0t_64_sync+0x15c/0x160
| ---[ end trace 0000000000000000 ]---
| ---------test_init-----------
Fix this by reverting to the old behaviour of ignoring the old
instruction when initialising an mcount callsite in a module, which was
the behaviour prior to commit a6253579977e4c6f.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: a6253579977e ("arm64: ftrace: consistently handle PLTs.")
Reported-by: Li Huafei <lihuafei1@huawei.com>
Link: https://lore.kernel.org/linux-arm-kernel/20220929094134.99512-1-lihuafei1@huawei.com
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220929134525.798593-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 136f4b1ec7c962ee37a787e095fd37b058d72bd3 ]
On arm32, the configuration options to specify the kernel command line
type depend on ATAGS. However, the actual CMDLINE cofiguration option
does not depend on ATAGS, and the code that handles this is not specific
to ATAGS (see drivers/of/fdt.c:early_init_dt_scan_chosen()).
Hence users who desire to override the kernel command line on arm32 must
enable support for ATAGS, even on a pure-DT system. Other architectures
(arm64, loongarch, microblaze, nios2, powerpc, and riscv) do not impose
such a restriction.
Hence drop the dependency on ATAGS.
Fixes: bd51e2f595580fb6 ("ARM: 7506/1: allow for ATAGS to be configured out when DT support is selected")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ba2d4bb9592bf7a6a3fe3dbe711ecfc3d004bab ]
According to s5k6a3 driver code, the reset line for the chip appears to
be active low. This also matches the typical polarity of reset lines in
general. Let's fix it up as having correct polarity in DTS is important
when the driver will be switched over to gpiod API.
Fixes: b4fec64758ab ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com
Link: https://lore.kernel.org/r/20220926104354.118578-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0d0a0b4413460383331088b2203ba09a6971bc3a ]
Range size of 0x2b4 was incorrect since there isn't 173 configurable
pins for muxing. Additionally there is a non-addressable region in the
mapping which requires splitting into two ranges.
main_pmx0 -> 67 pins
main_pmx1 -> 3 pins
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20220919205723.8342-1-mranostay@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 97c318bfbe84efded246e80428054f300042f110 ]
cxl_pmem.ko uses memory_add_physaddr_to_nid() but ia64 does not export it,
so this causes a build error:
ERROR: modpost: "memory_add_physaddr_to_nid" [drivers/cxl/cxl_pmem.ko] undefined!
Fix this by exporting that function.
Fixes: 8c2676a5870a ("hot-add-mem x86_64: memory_add_physaddr_to_nid node fixup")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keith Mannthey <kmannth@us.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d528eda7c96ce5c70f895854ecd5684bd5d80b9 ]
Both the Linkstation LS-CHLv2 and the LS-XHL have only one ethernet
port. This has always been wrong, i.e. the board code used to set up
both ports, but the driver will play nice and return -ENODEV if the
assiciated PHY is not found. Nevertheless, it is wrong. Remove it.
Fixes: 876e23333511 ("ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 04eabc6ac10fda9424606d9a7ab6ab9a5d95350a ]
Commit 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl
settings") unknowingly broke the serial output on this board. Before
this commit, the pinmux was still configured by the bootloader and the
kernel didn't reconfigured it again. This was an oversight by the
initial board support where the pinmux for the serial line was never
configured by the kernel. But with this commit, the serial line will be
reconfigured to the wrong pins. This is especially confusing, because
the output still works, but the input doesn't. Presumingly, the input is
reconfigured to MPP10, but the output is connected to both MPP11 and
MPP5.
Override the pinmux in the board device tree.
Fixes: 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 49e93898f0dc177e645c22d0664813567fd9ec00 ]
There is a bug in Turris Omnia's schematics, whereupon the MPP[26] pin,
which is routed to CN11 pin header, is documented as SPI CS1, but
MPP[26] pin does not support this function. Instead it controls chip
select 2 if in "spi0" mode.
Fix the name of the pin node in pinctrl node and fix the comment in SPI
node.
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72a482dbaec4b9e4d54b81be6bdb8c016fd2f4bd ]
As per the RZ/G2UL Hardware User's Manual (Rev.1.00 Apr, 2022),
the interrupt type of SCI{Rx,Tx} is edge triggered.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: cf40c9689e5109bf ("arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC")
Link: https://lore.kernel.org/r/20220802101534.1401342-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13dec051c7f139eef345c55a60941843e72128f1 ]
As per the RZ/V2L Hardware User's Manual (Rev.1.00 Nov, 2021),
the interrupt type of SCI{Rx,Tx} is edge triggered.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 7c2b8198f4f321df ("arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC")
Link: https://lore.kernel.org/r/20220802101534.1401342-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f3b7bc89c97b98aa6f157d5f296695af8940a5ac ]
As per the latest RZ/G2L Hardware User's Manual (Rev.1.10 Apr, 2022),
the interrupt type of SCI{Rx,Tx} is edge triggered.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: f9a2adcc9e908907 ("arm64: dts: renesas: r9a07g044: Add SCI[0-1] nodes")
Link: https://lore.kernel.org/r/20220802101534.1401342-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|