| Age | Commit message (Collapse) | Author |
|---|
|
commit 72ff2bf04db2a48840df93a461b7115900f46c05 upstream.
xts_crypt() code doesn't call kernel_fpu_end() after calling
kernel_fpu_begin() if walk.nbytes is 0. The correct behavior should be
not calling kernel_fpu_begin() if walk.nbytes is 0.
Reported-by: syzbot+20191dc583eff8602d2d@syzkaller.appspotmail.com
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9523b33cc31cf8ce703f8facee9fd16cba36d5ad upstream.
This is a nuisance when CONFIG_WERROR is set, so drop the variable
declaration since the code that used it was removed.
../arch/nios2/kernel/setup.c: In function 'setup_arch':
../arch/nios2/kernel/setup.c:152:13: warning: unused variable 'dram_start' [-Wunused-variable]
152 | int dram_start;
Fixes: 7f7bc20bc41a ("nios2: Don't use _end for calculating min_low_pfn")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andreas Oetken <andreas.oetken@siemens.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 291073a566b2094c7192872cc0f17ce73d83cb76 ]
The recent change to make objtool aware of more symbol relocation types
(commit 24ff65257375: "objtool: Teach get_alt_entry() about more
relocation types") also added another check, and resulted in this
objtool warning when building kvm on x86:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
The reason seems to be that kvm_fastop_exception() is marked as a global
symbol, which causes the relocation to ke kept around for objtool. And
at the same time, the kvm_fastop_exception definition (which is done as
an inline asm statement) doesn't actually set the type of the global,
which then makes objtool unhappy.
The minimal fix is to just not mark kvm_fastop_exception as being a
global symbol. It's only used in that one compilation unit anyway, so
it was always pointless. That's how all the other local exception table
labels are done.
I'm not entirely happy about the kinds of games that the kvm code plays
with doing its own exception handling, and the fact that it confused
objtool is most definitely a symptom of the code being a bit too subtle
and ad-hoc. But at least this trivial one-liner makes objtool no longer
upset about what is going on.
Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types")
Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecc2123e09f9e71ddc6c53d71e283b8ada685fe2 ]
According to the latest event list, the event encoding 0xEF is only
available on the first 4 counters. Add it into the event constraints
table.
Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1632842343-25862-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ced185824c89b60e65b5a2606954c098320cdfb8 ]
Fix the case where the dst register maps to %rax as otherwise this produces
an incorrect mapping with the implementation in 981f94c3e921 ("bpf: Add
bitwise atomic instructions") as %rax is clobbered given it's part of the
cmpxchg as operand.
The issue is similar to b29dd96b905f ("bpf, x86: Fix BPF_FETCH atomic and/or/
xor with r0 as src") just that the case of dst register was missed.
Before, dst=r0 (%rax) src=r2 (%rsi):
[...]
c5: mov %rax,%r10
c8: mov 0x0(%rax),%rax <---+ (broken)
cc: mov %rax,%r11 |
cf: and %rsi,%r11 |
d2: lock cmpxchg %r11,0x0(%rax) <---+
d8: jne 0x00000000000000c8 |
da: mov %rax,%rsi |
dd: mov %r10,%rax |
[...] |
|
After, dst=r0 (%rax) src=r2 (%rsi): |
|
[...] |
da: mov %rax,%r10 |
dd: mov 0x0(%r10),%rax <---+ (fixed)
e1: mov %rax,%r11 |
e4: and %rsi,%r11 |
e7: lock cmpxchg %r11,0x0(%r10) <---+
ed: jne 0x00000000000000dd
ef: mov %rax,%rsi
f2: mov %r10,%rax
[...]
The remaining combinations were fine as-is though:
After, dst=r9 (%r15) src=r0 (%rax):
[...]
dc: mov %rax,%r10
df: mov 0x0(%r15),%rax
e3: mov %rax,%r11
e6: and %r10,%r11
e9: lock cmpxchg %r11,0x0(%r15)
ef: jne 0x00000000000000df _
f1: mov %rax,%r10 | (unneeded, but
f4: mov %r10,%rax _| not a problem)
[...]
After, dst=r9 (%r15) src=r4 (%rcx):
[...]
de: mov %rax,%r10
e1: mov 0x0(%r15),%rax
e5: mov %rax,%r11
e8: and %rcx,%r11
eb: lock cmpxchg %r11,0x0(%r15)
f1: jne 0x00000000000000e1
f3: mov %rax,%rcx
f6: mov %r10,%rax
[...]
The case of dst == src register is rejected by the verifier and
therefore not supported, but x86 JIT also handles this case just
fine.
After, dst=r0 (%rax) src=r0 (%rax):
[...]
eb: mov %rax,%r10
ee: mov 0x0(%r10),%rax
f2: mov %rax,%r11
f5: and %r10,%r11
f8: lock cmpxchg %r11,0x0(%r10)
fe: jne 0x00000000000000ee
100: mov %rax,%r10
103: mov %r10,%rax
[...]
Fixes: 981f94c3e921 ("bpf: Add bitwise atomic instructions")
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37cb28ec7d3a36a5bace7063a3dba633ab110f8b ]
The conditional branch instructions on MIPS use 18-bit signed offsets
allowing for a branch range of 128 KBytes (backward and forward).
However, this limit is not observed by the cBPF JIT compiler, and so
the JIT compiler emits out-of-range branches when translating certain
cBPF programs. A specific example of such a cBPF program is included in
the "BPF_MAXINSNS: exec all MSH" test from lib/test_bpf.c that executes
anomalous machine code containing incorrect branch offsets under JIT.
Furthermore, this issue can be abused to craft undesirable machine
code, where the control flow is hijacked to execute arbitrary Kernel
code.
The following steps can be used to reproduce the issue:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_name="BPF_MAXINSNS: exec all MSH"
This should produce multiple warnings from build_bimm() similar to:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 209 at arch/mips/mm/uasm-mips.c:210 build_insn+0x558/0x590
Micro-assembler field overflow
Modules linked in: test_bpf(+)
CPU: 0 PID: 209 Comm: modprobe Not tainted 5.14.3 #1
Stack : 00000000 807bb824 82b33c9c 801843c0 00000000 00000004 00000000 63c9b5ee
82b33af4 80999898 80910000 80900000 82fd6030 00000001 82b33a98 82087180
00000000 00000000 80873b28 00000000 000000fc 82b3394c 00000000 2e34312e
6d6d6f43 809a180f 809a1836 6f6d203a 80900000 00000001 82b33bac 80900000
00027f80 00000000 00000000 807bb824 00000000 804ed790 001cc317 00000001
[...]
Call Trace:
[<80108f44>] show_stack+0x38/0x118
[<807a7aac>] dump_stack_lvl+0x5c/0x7c
[<807a4b3c>] __warn+0xcc/0x140
[<807a4c3c>] warn_slowpath_fmt+0x8c/0xb8
[<8011e198>] build_insn+0x558/0x590
[<8011e358>] uasm_i_bne+0x20/0x2c
[<80127b48>] build_body+0xa58/0x2a94
[<80129c98>] bpf_jit_compile+0x114/0x1e4
[<80613fc4>] bpf_prepare_filter+0x2ec/0x4e4
[<8061423c>] bpf_prog_create+0x80/0xc4
[<c0a006e4>] test_bpf_init+0x300/0xba8 [test_bpf]
[<8010051c>] do_one_initcall+0x50/0x1d4
[<801c5e54>] do_init_module+0x60/0x220
[<801c8b20>] sys_finit_module+0xc4/0xfc
[<801144d0>] syscall_common+0x34/0x58
[...]
---[ end trace a287d9742503c645 ]---
Then the anomalous machine code executes:
=> 0xc0a18000: addiu sp,sp,-16
0xc0a18004: sw s3,0(sp)
0xc0a18008: sw s4,4(sp)
0xc0a1800c: sw s5,8(sp)
0xc0a18010: sw ra,12(sp)
0xc0a18014: move s5,a0
0xc0a18018: move s4,zero
0xc0a1801c: move s3,zero
# __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0)
0xc0a18020: lui t6,0x8012
0xc0a18024: ori t4,t6,0x9e14
0xc0a18028: li a1,0
0xc0a1802c: jalr t4
0xc0a18030: move a0,s5
0xc0a18034: bnez v0,0xc0a1ffb8 # incorrect branch offset
0xc0a18038: move v0,zero
0xc0a1803c: andi s4,s3,0xf
0xc0a18040: b 0xc0a18048
0xc0a18044: sll s4,s4,0x2
[...]
# __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0)
0xc0a1ffa0: lui t6,0x8012
0xc0a1ffa4: ori t4,t6,0x9e14
0xc0a1ffa8: li a1,0
0xc0a1ffac: jalr t4
0xc0a1ffb0: move a0,s5
0xc0a1ffb4: bnez v0,0xc0a1ffb8 # incorrect branch offset
0xc0a1ffb8: move v0,zero
0xc0a1ffbc: andi s4,s3,0xf
0xc0a1ffc0: b 0xc0a1ffc8
0xc0a1ffc4: sll s4,s4,0x2
# __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0)
0xc0a1ffc8: lui t6,0x8012
0xc0a1ffcc: ori t4,t6,0x9e14
0xc0a1ffd0: li a1,0
0xc0a1ffd4: jalr t4
0xc0a1ffd8: move a0,s5
0xc0a1ffdc: bnez v0,0xc0a3ffb8 # correct branch offset
0xc0a1ffe0: move v0,zero
0xc0a1ffe4: andi s4,s3,0xf
0xc0a1ffe8: b 0xc0a1fff0
0xc0a1ffec: sll s4,s4,0x2
[...]
# epilogue
0xc0a3ffb8: lw s3,0(sp)
0xc0a3ffbc: lw s4,4(sp)
0xc0a3ffc0: lw s5,8(sp)
0xc0a3ffc4: lw ra,12(sp)
0xc0a3ffc8: addiu sp,sp,16
0xc0a3ffcc: jr ra
0xc0a3ffd0: nop
To mitigate this issue, we assert the branch ranges for each emit call
that could generate an out-of-range branch.
Fixes: 36366e367ee9 ("MIPS: BPF: Restore MIPS32 cBPF JIT")
Fixes: c6610de353da ("MIPS: net: Add BPF JIT")
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/bpf/20210915160437.4080-1-piotras@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 356ed64991c6847a0c4f2e8fa3b1133f7a14f1fc ]
Currently if a function ptr in struct_ops has a return value, its
caller will get a random return value from it, because the return
value of related BPF_PROG_TYPE_STRUCT_OPS prog is just dropped.
So adding a new flag BPF_TRAMP_F_RET_FENTRY_RET to tell bpf trampoline
to save and return the return value of struct_ops prog if ret_size of
the function ptr is greater than 0. Also restricting the flag to be
used alone.
Fixes: 85d33df357b6 ("bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210914023351.3664499-1-houtao1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5c49d1850ddd3240d20dc40b01f593e35a184f38 upstream.
When updating the host's mask for its MSR_IA32_TSX_CTRL user return entry,
clear the mask in the found uret MSR instead of vmx->guest_uret_msrs[i].
Modifying guest_uret_msrs directly is completely broken as 'i' does not
point at the MSR_IA32_TSX_CTRL entry. In fact, it's guaranteed to be an
out-of-bounds accesses as is always set to kvm_nr_uret_msrs in a prior
loop. By sheer dumb luck, the fallout is limited to "only" failing to
preserve the host's TSX_CTRL_CPUID_CLEAR. The out-of-bounds access is
benign as it's guaranteed to clear a bit in a guest MSR value, which are
always zero at vCPU creation on both x86-64 and i386.
Cc: stable@vger.kernel.org
Fixes: 8ea8b8d6f869 ("KVM: VMX: Use common x86's uret MSR list as the one true list")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210926015545.281083-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 24a996ade34d00deef5dee2c33aacd8fda91ec31 upstream.
Nested bus lock VM exits are not supported yet. If L2 triggers bus lock
VM exit, it will be directed to L1 VMM, which would cause unexpected
behavior. Therefore, handle L2's bus lock VM exits in L0 directly.
Fixes: fe6b6bc802b4 ("KVM: VMX: Enable bus lock VM exit")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20210914095041.29764-1-chenyi.qiang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f1815e0aa770f2127c5df31eb5c2f0e37b60fa77 upstream.
DECOMMISSION the current SEV context if binding an ASID fails after
RECEIVE_START. Per AMD's SEV API, RECEIVE_START generates a new guest
context and thus needs to be paired with DECOMMISSION:
The RECEIVE_START command is the only command other than the LAUNCH_START
command that generates a new guest context and guest handle.
The missing DECOMMISSION can result in subsequent SEV launch failures,
as the firmware leaks memory and might not able to allocate more SEV
guest contexts in the future.
Note, LAUNCH_START suffered the same bug, but was previously fixed by
commit 934002cd660b ("KVM: SVM: Call SEV Guest Decommission if ASID
binding fails").
Cc: Alper Gun <alpergun@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: David Rienjes <rientjes@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: John Allen <john.allen@amd.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vipin Sharma <vipinsh@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Marc Orr <marcorr@google.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Fixes: af43cbbf954b ("KVM: SVM: Add support for KVM_SEV_RECEIVE_START command")
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210912181815.3899316-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b92b6ca92b65bef811048c481e4446f4828500a upstream.
A mirrored SEV-ES VM will need to call KVM_SEV_LAUNCH_UPDATE_VMSA to
setup its vCPUs and have them measured, and their VMSAs encrypted. Without
this change, it is impossible to have mirror VMs as part of SEV-ES VMs.
Also allow the guest status check and debugging commands since they do
not change any guest state.
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Nathan Tempelman <natet@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steve Rutherford <srutherford@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 54526d1fd593 ("KVM: x86: Support KVM VMs sharing SEV context", 2021-04-21)
Message-Id: <20210921150345.2221634-3-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bb18a677746543e7f5eeb478129c92cedb0f9658 upstream.
The update-VMSA ioctl touches data stored in struct kvm_vcpu, and
therefore should not be performed concurrently with any VCPU ioctl
that might cause KVM or the processor to use the same data.
Adds vcpu mutex guard to the VMSA updating code. Refactors out
__sev_launch_update_vmsa() function to deal with per vCPU parts
of sev_launch_update_vmsa().
Fixes: ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20210915171755.3773766-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 50c038018d6be20361e8a2890262746a4ac5b11f upstream.
Require the target guest page to be writable when pinning memory for
RECEIVE_UPDATE_DATA. Per the SEV API, the PSP writes to guest memory:
The result is then encrypted with GCTX.VEK and written to the memory
pointed to by GUEST_PADDR field.
Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210914210951.2994260-2-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f43c887cb7cb5b66c4167d40a4209027f5fdb5ce upstream.
For mirroring SEV-ES the mirror VM will need more then just the ASID.
The FD and the handle are required to all the mirror to call psp
commands. The mirror VM will need to call KVM_SEV_LAUNCH_UPDATE_VMSA to
setup its vCPUs' VMSAs for SEV-ES.
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Nathan Tempelman <natet@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steve Rutherford <srutherford@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 54526d1fd593 ("KVM: x86: Support KVM VMs sharing SEV context", 2021-04-21)
Message-Id: <20210921150345.2221634-2-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d68bad6d869fae8f4d50ab6423538dec7da72d1 upstream.
Windows Server 2022 with Hyper-V role enabled failed to boot on KVM when
enlightened VMCS is advertised. Debugging revealed there are two exposed
secondary controls it is not happy with: SECONDARY_EXEC_ENABLE_VMFUNC and
SECONDARY_EXEC_SHADOW_VMCS. These controls are known to be unsupported,
as there are no corresponding fields in eVMCSv1 (see the comment above
EVMCS1_UNSUPPORTED_2NDEXEC definition).
Previously, commit 31de3d2500e4 ("x86/kvm/hyper-v: move VMX controls
sanitization out of nested_enable_evmcs()") introduced the required
filtering mechanism for VMX MSRs but for some reason put only known
to be problematic (and not full EVMCS1_UNSUPPORTED_* lists) controls
there.
Note, Windows Server 2022 seems to have gained some sanity check for VMX
MSRs: it doesn't even try to launch a guest when there's something it
doesn't like, nested_evmcs_check_controls() mechanism can't catch the
problem.
Let's be bold this time and instead of playing whack-a-mole just filter out
all unsupported controls from VMX MSRs.
Fixes: 31de3d2500e4 ("x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210907163530.110066-1-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e8a747d0884e554a8c1872da6c8f680a4f893c6d upstream.
Check whether a CPUID entry's index is significant before checking for a
matching index to hack-a-fix an undefined behavior bug due to consuming
uninitialized data. RESET/INIT emulation uses kvm_cpuid() to retrieve
CPUID.0x1, which does _not_ have a significant index, and fails to
initialize the dummy variable that doubles as EBX/ECX/EDX output _and_
ECX, a.k.a. index, input.
Practically speaking, it's _extremely_ unlikely any compiler will yield
code that causes problems, as the compiler would need to inline the
kvm_cpuid() call to detect the uninitialized data, and intentionally hose
the kernel, e.g. insert ud2, instead of simply ignoring the result of
the index comparison.
Although the sketchy "dummy" pattern was introduced in SVM by commit
66f7b72e1171 ("KVM: x86: Make register state after reset conform to
specification"), it wasn't actually broken until commit 7ff6c0350315
("KVM: x86: Remove stateful CPUID handling") arbitrarily swapped the
order of operations such that "index" was checked before the significant
flag.
Avoid consuming uninitialized data by reverting to checking the flag
before the index purely so that the fix can be easily backported; the
offending RESET/INIT code has been refactored, moved, and consolidated
from vendor code to common x86 since the bug was introduced. A future
patch will directly address the bad RESET/INIT behavior.
The undefined behavior was detected by syzbot + KernelMemorySanitizer.
BUG: KMSAN: uninit-value in cpuid_entry2_find arch/x86/kvm/cpuid.c:68
BUG: KMSAN: uninit-value in kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103
BUG: KMSAN: uninit-value in kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183
cpuid_entry2_find arch/x86/kvm/cpuid.c:68 [inline]
kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 [inline]
kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183
kvm_vcpu_reset+0x13fb/0x1c20 arch/x86/kvm/x86.c:10885
kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923
vcpu_enter_guest+0xfd2/0x6d80 arch/x86/kvm/x86.c:9534
vcpu_run+0x7f5/0x18d0 arch/x86/kvm/x86.c:9788
kvm_arch_vcpu_ioctl_run+0x245b/0x2d10 arch/x86/kvm/x86.c:10020
Local variable ----dummy@kvm_vcpu_reset created at:
kvm_vcpu_reset+0x1fb/0x1c20 arch/x86/kvm/x86.c:10812
kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923
Reported-by: syzbot+f3985126b746b3d59c9d@syzkaller.appspotmail.com
Reported-by: Alexander Potapenko <glider@google.com>
Fixes: 2a24be79b6b7 ("KVM: VMX: Set EDX at INIT with CPUID.0x1, Family-Model-Stepping")
Fixes: 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210929222426.1855730-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 03a6e84069d1870f5b3d360e64cb330b66f76dee upstream.
Explicitly zero the guest's CR3 and mark it available+dirty at RESET/INIT.
Per Intel's SDM and AMD's APM, CR3 is zeroed at both RESET and INIT. For
RESET, this is a nop as vcpu is zero-allocated. For INIT, the bug has
likely escaped notice because no firmware/kernel puts its page tables root
at PA=0, let alone relies on INIT to get the desired CR3 for such page
tables.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210921000303.400537-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit faf6b755629627f19feafa75b32e81cd7738f12d upstream.
These field correspond to features that we don't expose yet to L2
While currently there are no CVE worthy features in this field,
if AMD adds more features to this field, that could allow guest
escapes similar to CVE-2021-3653 and CVE-2021-3656.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-6-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2f9b68f57c6278c322793a06063181deded0ad69 upstream.
KASAN reports the following issue:
BUG: KASAN: stack-out-of-bounds in kvm_make_vcpus_request_mask+0x174/0x440 [kvm]
Read of size 8 at addr ffffc9001364f638 by task qemu-kvm/4798
CPU: 0 PID: 4798 Comm: qemu-kvm Tainted: G X --------- ---
Hardware name: AMD Corporation DAYTONA_X/DAYTONA_X, BIOS RYM0081C 07/13/2020
Call Trace:
dump_stack+0xa5/0xe6
print_address_description.constprop.0+0x18/0x130
? kvm_make_vcpus_request_mask+0x174/0x440 [kvm]
__kasan_report.cold+0x7f/0x114
? kvm_make_vcpus_request_mask+0x174/0x440 [kvm]
kasan_report+0x38/0x50
kasan_check_range+0xf5/0x1d0
kvm_make_vcpus_request_mask+0x174/0x440 [kvm]
kvm_make_scan_ioapic_request_mask+0x84/0xc0 [kvm]
? kvm_arch_exit+0x110/0x110 [kvm]
? sched_clock+0x5/0x10
ioapic_write_indirect+0x59f/0x9e0 [kvm]
? static_obj+0xc0/0xc0
? __lock_acquired+0x1d2/0x8c0
? kvm_ioapic_eoi_inject_work+0x120/0x120 [kvm]
The problem appears to be that 'vcpu_bitmap' is allocated as a single long
on stack and it should really be KVM_MAX_VCPUS long. We also seem to clear
the lower 16 bits of it with bitmap_zero() for no particular reason (my
guess would be that 'bitmap' and 'vcpu_bitmap' variables in
kvm_bitmap_or_dest_vcpus() caused the confusion: while the later is indeed
16-bit long, the later should accommodate all possible vCPUs).
Fixes: 7ee30bc132c6 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs")
Fixes: 9a2ae9f6b6bb ("KVM: x86: Zero the IOAPIC scan request dest vCPUs bitmap")
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210827092516.1027264-7-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad9af930680bb396c87582edc172b3a7cf2a3fbf upstream.
There're other modules might use hv_clock_per_cpu variable like ptp_kvm,
so move it into kvmclock.h and export the symbol to make it visiable to
other modules.
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Message-Id: <1632892429-101194-2-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit adfc8f9d2f9fefd880abc82cfbf62cbfe6539c97 ]
SERIAL_CORE_CONSOLE depends on TTY so EARLY_PRINTK should also
depend on TTY so that it does not select SERIAL_CORE_CONSOLE
inadvertently.
WARNING: unmet direct dependencies detected for SERIAL_CORE_CONSOLE
Depends on [n]: TTY [=n] && HAS_IOMEM [=y]
Selected by [y]:
- EARLY_PRINTK [=y]
Fixes: e8bf5bc776ed ("nios2: add early printk support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 50e43a57334400668952f8e551c9d87d3ed2dfef ]
We get there when sigreturn has performed obscene acts on kernel stack;
in particular, the location of pt_regs has shifted. We are about to call
syscall_trace(), which might stop for tracer. If that happens, we'd better
have task_pt_regs() returning correct result...
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: bd6f56a75bb2 ("m68k: Missing syscall_trace() on sigreturn")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dMWeV1LkHiOpr@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d2b59bd4b06d84a4eadb520b0f71c62fe8ec0a62 ]
Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.
Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.
Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8c8a3b5bd960cd88f7655b5251dc28741e11f139 upstream.
This lets us avoid doing unnecessary work on hardware that does not
support MTE, and will allow us to freely use MTE instructions in the
code called by mte_thread_switch().
Since this would mean that we do a redundant check in
mte_check_tfsr_el1(), remove it and add two checks now required in its
callers. This also avoids an unnecessary DSB+ISB sequence on the syscall
exit path for hardware not supporting MTE.
Fixes: 65812c6921cc ("arm64: mte: Enable async tag check fault")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I02fd000d1ef2c86c7d2952a7f099b254ec227a5d
Link: https://lore.kernel.org/r/20210915190336.398390-1-pcc@google.com
[catalin.marinas@arm.com: adjust the commit log slightly]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8aa83e6395ce047a506f0b16edca45f36c1ae7f8 upstream.
Commit in Fixes introduced early_reserve_memory() to do all needed
initial memblock_reserve() calls in one function. Unfortunately, the call
of early_reserve_memory() is done too late for Xen dom0, as in some
cases a Xen hook called by e820__memory_setup() will need those memory
reservations to have happened already.
Move the call of early_reserve_memory() before the call of
e820__memory_setup() in order to avoid such problems.
Fixes: a799c2bd29d1 ("x86/setup: Consolidate early memory reservations")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 35a3f4ef0ab543daa1725b0c963eb8c05e3376f8 ]
Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine. One exception is alpha. This
results in a number of compile errors such as
drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
drivers/net/wan/lmc/lmc_main.c:1782:50: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type
drivers/atm/ambassador.c: In function 'do_loader_command':
drivers/atm/ambassador.c:1747:58: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type
Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9fcb2e93f41c07a400885325e7dbdfceba6efaec ]
__stack_chk_guard is setup once while init stage and never changed
after that.
Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 90cc7bed1ed19f869ae7221a6b41887fe762a6a3 ]
Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning:
arch/parisc/kernel/setup.c: In function 'start_parisc':
error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0
Signed-off-by: Helge Deller <deller@gmx.de>
Co-Developed-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc7c028dcdbfe981bca75d2a7b95f363eb691ef3 ]
The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.
As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work. This
results in various errors like:
arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
647 | if (!strcmp(names + ep[ret].name_offset, name))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.
This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).
Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59583f747664046aaae5588d56d5954fab66cce8 ]
Commit 53b7670e5735 ("sparc: factor the dma coherent mapping into
helper") lost the page align for the calls to dma_make_coherent and
srmmu_unmapiorange. The latter cannot handle a non page aligned len
argument.
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1a89856fbf63fffde6a4771d8f1ac21df549e50 ]
m68k builds fail widely with errors such as
arch/m68k/include/asm/raw_io.h:20:19: error:
cast to pointer from integer of different size
arch/m68k/include/asm/raw_io.h:30:32: error:
cast to pointer from integer of different size [-Werror=int-to-p
On m68k, io functions are defined as macros. The problem is seen if the
macro parameter variable size differs from the size of a pointer. Cast
the parameter of all io macros to unsigned long before casting it to
a pointer to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d81ff5fe14a950f53e2833cfa196e7bb3fd5d4e3 ]
When building under GCC 4.9 and 5.5:
arch/x86/include/asm/special_insns.h: Assembler messages:
arch/x86/include/asm/special_insns.h:286: Error: operand size mismatch for `setz'
Change the type to "bool" for condition code arguments, as documented.
Fixes: 7f5933f81bd8 ("x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction")
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210910223332.3224851-1-keescook@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4ffd5df9d18031b6a53f934388726775b4452d3 ]
The function __bad_area_nosemaphore() calls kernelmode_fixup_or_oops()
with the parameter @signal being actually @pkey, which will send a
signal numbered with the argument in @pkey.
This bug can be triggered when the kernel fails to access user-given
memory pages that are protected by a pkey, so it can go down the
do_user_addr_fault() path and pass the !user_mode() check in
__bad_area_nosemaphore().
Most cases will simply run the kernel fixup code to make an -EFAULT. But
when another condition current->thread.sig_on_uaccess_err is met, which
is only used to emulate vsyscall, the kernel will generate the wrong
signal.
Add a new parameter @pkey to kernelmode_fixup_or_oops() to fix this.
[ bp: Massage commit message, fix build error as reported by the 0day
bot: https://lkml.kernel.org/r/202109202245.APvuT8BX-lkp@intel.com ]
Fixes: 5042d40a264c ("x86/fault: Bypass no_context() for implicit kernel faults from usermode")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiashuo Liang <liangjs@pku.edu.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20210730030152.249106-1-liangjs@pku.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 59a68d4138086c015ab8241c3267eec5550fbd44 upstream.
As with strlen(), the patches importing the updated str{n}cmp()
implementations were originally developed and tested before the
advent of CONFIG_KASAN_HW_TAGS, and have subsequently revealed
not to be MTE-safe. Since in-kernel MTE is still a rather niche
case, let it temporarily fall back to the generic C versions for
correctness until we can figure out the best fix.
Fixes: 758602c04409 ("arm64: Import latest version of Cortex Strings' strcmp")
Fixes: 020b199bc70d ("arm64: Import latest version of Cortex Strings' strncmp")
Cc: <stable@vger.kernel.org> # 5.14.x
Reported-by: Branislav Rankov <branislav.rankov@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/34dc4d12eec0adae49b0ac927df642ed10089d40.1631890770.git.robin.murphy@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 22b70e6f2da0a4c8b1421b00cfc3016bc9d4d9d4 upstream.
A noted side-effect of commit 0c6c2d3615ef ("arm64: Generate cpucaps.h")
is that cpucaps are now sorted, changing the enumeration order. This
assumed no dependencies between cpucaps, which turned out not to be true
in one case. UNMAP_KERNEL_AT_EL0 currently needs to be processed after
WORKAROUND_CAVIUM_27456. ThunderX systems are incompatible with KPTI, so
unmap_kernel_at_el0() bails if WORKAROUND_CAVIUM_27456 is set. But because
of the sorting, WORKAROUND_CAVIUM_27456 will not yet have been considered
when unmap_kernel_at_el0() checks for it, so the kernel tries to
run w/ KPTI - and quickly falls over.
Because all ThunderX implementations have homogeneous CPUs, we can remove
this dependency by just checking the current CPU for the erratum.
Fixes: 0c6c2d3615ef ("arm64: Generate cpucaps.h")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210923145002.3394558-1-dann.frazier@canonical.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0594c58161b6e0f3da8efa9c6e3d4ba52b652717 upstream.
The initial observation was that in PV mode under Xen 32-bit user space
didn't work anymore. Attempts of system calls ended in #GP(0x402). All
of the sudden the vector 0x80 handler was not in place anymore. As it
turns out up to 5.13 redundant initialization did occur: Once from
cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a
2nd time while each CPU was brought fully up. This 2nd initialization is
now gone, uncovering that the 1st one was flawed: Unlike for the
set_trap_table hypercall, a full virtual IDT needs to be specified here;
the "vector" fields of the individual entries are of no interest. With
many (kernel) IDT entries still(?) (i.e. at that point at least) empty,
the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus
becoming the domain's handler for vector 0x20.
Make xen_convert_trap_info() fit for either purpose, leveraging the fact
that on the xen_copy_trap_info() path the table starts out zero-filled.
This includes moving out the writing of the sentinel, which would also
have lead to a buffer overrun in the xen_copy_trap_info() case if all
(kernel) IDT entries were populated. Convert the writing of the sentinel
to clearing of the entire table entry rather than just the address
field.
(I didn't bother trying to identify the commit which uncovered the issue
in 5.14; the commit named below is the one which actually introduced the
bad code.)
Fixes: f87e4cac4f4e ("xen: SMP guest support")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 88b604263f3d6eedae0b1c2c3bbd602d1e2e8775 ]
current_stack_pointer() simply returns current value of %r15. If
current_stack_pointer() caller allocates stack (which is the case in
unwind code) %r15 points to a stack frame allocated for callees, meaning
current_stack_pointer() caller (e.g. stack_trace_save) will end up in
the stacktrace. This is not expected by stack_trace_save*() callers and
causes problems.
current_frame_address() on the other hand returns function stack frame
address, which matches %r15 upon function invocation. Using it in
get_stack_pointer() makes it more aligned with x86 implementation
(according to BACKTRACE_SELF_TEST output) and meets stack_trace_save*()
caller's expectations, notably KCSAN.
Also make sure unwind_start is always inlined.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/patch.git-04dd26be3043.your-ad-here.call-01630504868-ext-6188@work.hours
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 436fc4feeabbf103d78d50a8e091b3aac28cc37f ]
kmemleak with enabled auto scanning reports that our stack allocation is
lost. This is because we're saving the pointer + STACK_INIT_OFFSET to
lowcore. When kmemleak now scans the objects, it thinks that this one is
lost because it can't find a corresponding pointer.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbba17870881cd17bca24673ccb72859431da5bd ]
Currently, nothing is output on the serial console, unless
"console=ttyS0,115200n8" or "earlycon" are appended to the kernel
command line. Enable automatic console selection using
chosen/stdout-path by adding a proper alias, and configure the expected
serial rate.
While at it, add aliases for the other three serial ports, which are
provided on the same micro-USB connector as the first one.
Fixes: 0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 88053ec8cb1b91df566353cd3116470193797e00 ]
KVM in nVHE mode divides up its VA space into two equal halves, and
picks the half that does not conflict with the HYP ID map to map its
linear region. This worked fine when the kernel's linear map itself was
guaranteed to cover precisely as many bits of VA space, but this was
changed by commit f4693c2716b35d08 ("arm64: mm: extend linear region for
52-bit VA configurations").
The result is that, depending on the placement of the ID map, kernel-VA
to hyp-VA translations may produce addresses that either conflict with
other HYP mappings (including the ID map itself) or generate addresses
outside of the 52-bit addressable range, neither of which is likely to
lead to anything useful.
Given that 52-bit capable cores are guaranteed to implement VHE, this
only affects configurations such as pKVM where we opt into non-VHE mode
even if the hardware is VHE capable. So just for these configurations,
let's limit the kernel linear map to 51 bits and work around the
problem.
Fixes: f4693c2716b3 ("arm64: mm: extend linear region for 52-bit VA configurations")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210826165613.60774-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b92d4add5f6dcf21275185c997d6ecb800054cd ]
DEFINE_SMP_CALL_CACHE_FUNCTION() was usefel before the CPU hotplug rework
to ensure that the cache related functions are called on the upcoming CPU
because the notifier itself could run on any online CPU.
The hotplug state machine guarantees that the callbacks are invoked on the
upcoming CPU. So there is no need to have this SMP function call
obfuscation. That indirection was missed when the hotplug notifiers were
converted.
This also solves the problem of ARM64 init_cache_level() invoking ACPI
functions which take a semaphore in that context. That's invalid as SMP
function calls run with interrupts disabled. Running it just from the
callback in context of the CPU hotplug thread solves this.
Fixes: 8571890e1513 ("arm64: Add support for ACPI based firmware tables")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/871r69ersb.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15256194eff64f9a774b33b7817ea663e352394a ]
Make the oklabel within the CHKSTG macro local. This makes sure that
tools like objdump and the crash debugging tool still disassemble full
functions where the macro has been used instead of stopping half way
where such a global label is used and one has to guess how to
disassemble the rest of such a function:
E.g.:
0000000000cb0270 <mcck_int_handler>:
cb0270: b2 05 03 20 stck 800
...
cb0354: a7 74 00 97 jne cb0482 <oklabel270+0xe2>
0000000000cb0358 <oklabel243>:
cb0358: c0 e0 00 22 4e 8f larl %r14,10fa076 <opcode+0x2558>
...
Fixes: d35925b34996 ("s390/mcck: move storage error checks to assembler")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7ad28e0df7ee9dbcb793bb88dd81d4d22bb9a10e upstream.
If initialization fails, e.g. because the connection failed,
we leak the 'vu_dev'. Fix that. Reported by smatch.
Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit adf9ae0d159d3dc94f58d788fc4757c8749ac0df upstream.
In commit 9f0b4807a44f ("um: rework userspace stubs to not hard-code
stub location") I changed stub_segv_handler() to do a calculation with
a pointer to a stack variable to find the data page that we're using
for the stack and the rest of the data. This same commit was meant to
do it as well for stub_clone_handler(), but the change inadvertently
went into commit 84b2789d6115 ("um: separate child and parent errors
in clone stub") instead.
This was reported to not be compiled correctly by gcc 5, causing the
code to crash here. I'm not sure why, perhaps it's UB because the var
isn't initialized? In any case, this trick always seemed bad, so just
create a new inline function that does the calculation in assembly.
Reported-by: subashab@codeaurora.org
Fixes: 9f0b4807a44f ("um: rework userspace stubs to not hard-code stub location")
Fixes: 84b2789d6115 ("um: separate child and parent errors in clone stub")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1511df6f5e9ef32826f20db2ee81f8527154dc14 upstream.
EMIT6_PCREL() macro assumes that the previous pass generated 6 bytes
of code, which is not the case if branch shortening took place. Fix by
using jit->prg, like all the other EMIT6_PCREL_*() macros.
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e61dc9da0b7a0d91d57c2e20b5ea4fd2d4e7e53 upstream.
The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot
be represented as a 32-bit signed binary integer. Fix by using algfi in
this particular case.
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db7bee653859ef7179be933e7d1384644f795f26 upstream.
Currently the JIT completely removes things like `reg32 += 0`,
however, the BPF_ALU semantics requires the target register to be
zero-extended in such cases.
Fix by optimizing out only the arithmetic operation, but not the
subsequent zero-extension.
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6b5ff0405e4190f23780362ea324b250bc495683 ]
0day bot reports a build error:
ERROR: modpost: "clear_user_page" [drivers/media/v4l2-core/videobuf-dma-sg.ko] undefined!
so export it in arch/arc/ to fix the build error.
In most ARCHes, clear_user_page() is a macro. OTOH, in a few
ARCHes it is a function and needs to be exported.
PowerPC exported it in 2004. It looks like nds32 and nios2
still need to have it exported.
Fixes: 4102b53392d63 ("ARC: [mm] Aliasing VIPT dcache support 2/4")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6826c6849b46aaa91300201213701eb861af4ba0 ]
The CPU_ON PSCI call takes a payload that KVM uses to configure a
destination vCPU to run. This payload is non-architectural state and not
exposed through any existing UAPI. Effectively, we have a race between
CPU_ON and userspace saving/restoring a guest: if the target vCPU isn't
ran again before the VMM saves its state, the requested PC and context
ID are lost. When restored, the target vCPU will be runnable and start
executing at its old PC.
We can avoid this race by making sure the reset payload is serviced
before userspace can access a vCPU's state.
Fixes: 358b28f09f0a ("arm/arm64: KVM: Allow a VCPU to fully reset itself")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210818202133.1106786-3-oupton@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6654f9dfcb88fea3b9affc180dc3c04333d0f306 ]
KVM correctly serializes writes to a vCPU's reset state, however since
we do not take the KVM lock on the read side it is entirely possible to
read state from two different reset requests.
Cure the race for now by taking the KVM lock when reading the
reset_state structure.
Fixes: 358b28f09f0a ("arm/arm64: KVM: Allow a VCPU to fully reset itself")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210818202133.1106786-2-oupton@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
Shreyansh Chouhan
Randy Dunlap
Linus Torvalds
Kan Liang
Johan Almbladh
Piotr Krysiuk
Hou Tao
Zhenzhong Duan
Chenyi Qiang
Mingwei Zhang
Peter Gonda
Sean Christopherson
Vitaly Kuznetsov
Maxim Levitsky
Zelin Deng
Al Viro
Alexandra Winter
Peter Collingbourne
Juergen Gross
Guenter Roeck
Dan Li
Helge Deller
Andreas Larsson
Kees Cook
Jiashuo Liang
Robin Murphy
dann frazier
Jan Beulich
Vasily Gorbik
Sven Schnelle
Geert Uytterhoeven
Ard Biesheuvel
Thomas Gleixner
Heiko Carstens
Johannes Berg
Ilya Leoshkevich
Oliver Upton