Age | Commit message (Collapse) | Author |
|
Fix gcc warning:
arch/x86/boot/compressed/pgtable_64.c: In function 'find_trampoline_placement':
arch/x86/boot/compressed/pgtable_64.c:43:16: warning: unused variable 'trampoline_start' [-Wunused-variable]
unsigned long trampoline_start;
^
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/1563283040-31101-1-git-send-email-zhenzhong.duan@oracle.com
|
|
Fix gcc warnings:
arch/x86/boot/compressed/eboot.c: In function 'make_boot_params':
arch/x86/boot/compressed/eboot.c:394:6: warning: unused variable 'i' [-Wunused-variable]
int i;
^
arch/x86/boot/compressed/eboot.c:393:6: warning: unused variable 's1' [-Wunused-variable]
u8 *s1;
^
arch/x86/boot/compressed/eboot.c:392:7: warning: unused variable 's2' [-Wunused-variable]
u16 *s2;
^
arch/x86/boot/compressed/eboot.c:387:8: warning: unused variable 'options' [-Wunused-variable]
void *options, *handle;
^
arch/x86/boot/compressed/eboot.c: In function 'add_e820ext':
arch/x86/boot/compressed/eboot.c:498:16: warning: unused variable 'size' [-Wunused-variable]
unsigned long size;
^
arch/x86/boot/compressed/eboot.c:497:15: warning: unused variable 'status' [-Wunused-variable]
efi_status_t status;
^
arch/x86/boot/compressed/eboot.c: In function 'exit_boot_func':
arch/x86/boot/compressed/eboot.c:681:15: warning: unused variable 'status' [-Wunused-variable]
efi_status_t status;
^
arch/x86/boot/compressed/eboot.c:680:8: warning: unused variable 'nr_desc' [-Wunused-variable]
__u32 nr_desc;
^
arch/x86/boot/compressed/eboot.c: In function 'efi_main':
arch/x86/boot/compressed/eboot.c:750:22: warning: unused variable 'image' [-Wunused-variable]
efi_loaded_image_t *image;
^
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1563282957-26898-1-git-send-email-zhenzhong.duan@oracle.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Hugepage support
- "Image" header support for RISC-V kernel binaries, compatible with
the current ARM64 "Image" header
- Initial page table setup now split into two stages
- CONFIG_SOC support (starting with SiFive SoCs)
- Avoid reserving memory between RAM start and the kernel in
setup_bootmem()
- Enable high-res timers and dynamic tick in the RV64 defconfig
- Remove long-deprecated gate area stubs
- MAINTAINERS updates to switch to the newly-created shared RISC-V git
tree, and to fix a get_maintainers.pl issue for patches involving
SiFive E-mail addresses
Also, one integration fix to resolve a build problem introduced during
in the v5.3-rc1 merge window:
- Fix build break after macro-to-function conversion in
asm-generic/cacheflush.h
* tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix build break after macro-to-function conversion in generic cacheflush.h
RISC-V: Add an Image header that boot loader can parse.
RISC-V: Setup initial page tables in two stages
riscv: remove free_initrd_mem
riscv: ccache: Remove unused variable
riscv: Introduce huge page support for 32/64bit kernel
x86, arm64: Move ARCH_WANT_HUGE_PMD_SHARE config in arch/Kconfig
RISC-V: Fix memory reservation in setup_bootmem()
riscv: defconfig: enable SOC_SIFIVE
riscv: select SiFive platform drivers with SOC_SIFIVE
arch: riscv: add config option for building SiFive's SoC resource
riscv: Remove gate area stubs
MAINTAINERS: change the arch/riscv git tree to the new shared tree
MAINTAINERS: don't automatically patches involving SiFive to the linux-riscv list
RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS
|
|
The same getuser/putuser error paths are used regardless of whether AC
is set. In non-exception failure cases, this results in an unnecessary
CLAC.
Fixes the following warnings:
arch/x86/lib/getuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
arch/x86/lib/putuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/bc14ded2755ae75bd9010c446079e113dbddb74b.1563413318.git.jpoimboe@redhat.com
|
|
After adding mcsafe_handle_tail() to the objtool uaccess safe list,
objtool reports:
arch/x86/lib/usercopy_64.o: warning: objtool: mcsafe_handle_tail()+0x0: call to __fentry__() with UACCESS enabled
With SMAP, this function is called with AC=1, so it needs to be careful
about which functions it calls. Disable the ftrace entry hook, which
can potentially pull in a lot of extra code.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/8e13d6f0da1c8a3f7603903da6cbf6d582bbfe10.1563413318.git.jpoimboe@redhat.com
|
|
After an objtool improvement, it's complaining about the CLAC in
copy_user_handle_tail():
arch/x86/lib/copy_user_64.o: warning: objtool: .altinstr_replacement+0x12: redundant UACCESS disable
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x6: (alt)
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x2: (alt)
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x0: <=== (func)
copy_user_handle_tail() is incorrectly marked as a callable function, so
objtool is rightfully concerned about the CLAC with no corresponding
STAC.
Remove the ELF function annotation. The copy_user_handle_tail() code
path is already verified by objtool because it's jumped to by other
callable asm code (which does the corresponding STAC).
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6b6e436774678b4b9873811ff023bd29935bee5b.1563413318.git.jpoimboe@redhat.com
|
|
After an objtool improvement, it complains about the fact that
start_cpu0() jumps to code which has an LRET instruction.
arch/x86/kernel/head_64.o: warning: objtool: .head.text+0xe4: unsupported instruction in callable function
Technically, start_cpu0() is callable, but it acts nothing like a
callable function. Prevent objtool from treating it like one by
removing its ELF function annotation.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6b1b4505fcb90571a55fa1b52d71fb458ca24454.1563413318.git.jpoimboe@redhat.com
|
|
Fix the following warnings:
arch/x86/entry/thunk_64.o: warning: objtool: trace_hardirqs_on_thunk() is missing an ELF size annotation
arch/x86/entry/thunk_64.o: warning: objtool: trace_hardirqs_off_thunk() is missing an ELF size annotation
arch/x86/entry/thunk_64.o: warning: objtool: lockdep_sys_exit_thunk() is missing an ELF size annotation
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/89c97adc9f6cc44a0f5d03cde6d0357662938909.1563413318.git.jpoimboe@redhat.com
|
|
After making a change to improve objtool's sibling call detection, it
started showing the following warning:
arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame
The problem is the ____kvm_handle_fault_on_reboot() macro. It does a
fake call by pushing a fake RIP and doing a jump. That tricks the
unwinder into printing the function which triggered the exception,
rather than the .fixup code.
Instead of the hack to make it look like the original function made the
call, just change the macro so that the original function actually does
make the call. This allows removal of the hack, and also makes objtool
happy.
I triggered a vmx instruction exception and verified that the stack
trace is still sane:
kernel BUG at arch/x86/kvm/x86.c:358!
invalid opcode: 0000 [#1] SMP PTI
CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16
Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017
RIP: 0010:kvm_spurious_fault+0x5/0x10
Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246
RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000
RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000
R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0
R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000
FS: 00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
loaded_vmcs_init+0x4f/0xe0
alloc_loaded_vmcs+0x38/0xd0
vmx_create_vcpu+0xf7/0x600
kvm_vm_ioctl+0x5e9/0x980
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? free_one_page+0x13f/0x4e0
do_vfs_ioctl+0xa4/0x630
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x1c0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fa349b1ee5b
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.1563413318.git.jpoimboe@redhat.com
|
|
Objtool reports the following:
arch/x86/kvm/vmx/vmenter.o: warning: objtool: vmx_vmenter()+0x14: call without frame pointer save/setup
But frame pointers are necessarily broken anyway, because
__vmx_vcpu_run() clobbers RBP with the guest's value before calling
vmx_vmenter(). So calling without a frame pointer doesn't make things
any worse.
Make objtool happy by changing the call to a UD2.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/9fc2216c9dc972f95bb65ce2966a682c6bda1cb0.1563413318.git.jpoimboe@redhat.com
|
|
Some of the fastop functions, e.g. em_setcc(), are actually just used as
global labels which point to blocks of functions. The global labels are
incorrectly annotated as functions. Also the functions themselves don't
have size annotations.
Fixes a bunch of warnings like the following:
arch/x86/kvm/emulate.o: warning: objtool: seto() is missing an ELF size annotation
arch/x86/kvm/emulate.o: warning: objtool: em_setcc() is missing an ELF size annotation
arch/x86/kvm/emulate.o: warning: objtool: setno() is missing an ELF size annotation
arch/x86/kvm/emulate.o: warning: objtool: setc() is missing an ELF size annotation
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c8cc9be60ebbceb3092aa5dd91916039a1f88275.1563413318.git.jpoimboe@redhat.com
|
|
The __raw_callee_save_*() functions have an ELF symbol size of zero,
which confuses objtool and other tools.
Fixes a bunch of warnings like the following:
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pte_val() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pgd_val() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pte() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pgd() is missing an ELF size annotation
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/afa6d49bb07497ca62e4fc3b27a2d0cece545b4e.1563413318.git.jpoimboe@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The main changes in this release include:
- Add user space specific memory reading for kprobes
- Allow kprobes to be executed earlier in boot
The rest are mostly just various clean ups and small fixes"
* tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
tracing: Make trace_get_fields() global
tracing: Let filter_assign_type() detect FILTER_PTR_STRING
tracing: Pass type into tracing_generic_entry_update()
ftrace/selftest: Test if set_event/ftrace_pid exists before writing
ftrace/selftests: Return the skip code when tracing directory not configured in kernel
tracing/kprobe: Check registered state using kprobe
tracing/probe: Add trace_event_call accesses APIs
tracing/probe: Add probe event name and group name accesses APIs
tracing/probe: Add trace flag access APIs for trace_probe
tracing/probe: Add trace_event_file access APIs for trace_probe
tracing/probe: Add trace_event_call register API for trace_probe
tracing/probe: Add trace_probe init and free functions
tracing/uprobe: Set print format when parsing command
tracing/kprobe: Set print format right after parsed command
kprobes: Fix to init kprobes in subsys_initcall
tracepoint: Use struct_size() in kmalloc()
ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS
ftrace: Enable trampoline when rec count returns back to one
tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline
tracing: Make a separate config for trace event self tests
...
|
|
Despite the current efforts to read CR2 before tracing happens there still
exist a number of possible holes:
idtentry page_fault do_page_fault has_error_code=1
call error_entry
TRACE_IRQS_OFF
call trace_hardirqs_off*
#PF // modifies CR2
CALL_enter_from_user_mode
__context_tracking_exit()
trace_user_exit(0)
#PF // modifies CR2
call do_page_fault
address = read_cr2(); /* whoopsie */
And similar for i386.
Fix it by pulling the CR2 read into the entry code, before any of that
stuff gets a chance to run and ruin things.
Reported-by: He Zhe <zhe.he@windriver.com>
Reported-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: bp@alien8.de
Cc: rostedt@goodmis.org
Cc: torvalds@linux-foundation.org
Cc: hpa@zytor.com
Cc: dave.hansen@linux.intel.com
Cc: jgross@suse.com
Cc: joel@joelfernandes.org
Link: https://lkml.kernel.org/r/20190711114336.116812491@infradead.org
Debugged-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Commit 2700fefdb2d9 ("x86_64: Add gap to int3 to allow for call
emulation") forgot to update the comment, do so now.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: bp@alien8.de
Cc: torvalds@linux-foundation.org
Cc: hpa@zytor.com
Cc: dave.hansen@linux.intel.com
Cc: jgross@suse.com
Cc: zhe.he@windriver.com
Cc: joel@joelfernandes.org
Cc: devel@etsukata.com
Link: https://lkml.kernel.org/r/20190711114336.059780563@infradead.org
|
|
There's a bunch of duplication in idtentry, namely the
.Lfrom_usermode_switch_stack is a paranoid=0 copy of the normal flow.
Make this explicit by creating a idtentry_part helper macro.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: bp@alien8.de
Cc: torvalds@linux-foundation.org
Cc: hpa@zytor.com
Cc: dave.hansen@linux.intel.com
Cc: jgross@suse.com
Cc: zhe.he@windriver.com
Cc: joel@joelfernandes.org
Cc: devel@etsukata.com
Link: https://lkml.kernel.org/r/20190711114336.002429503@infradead.org
|
|
Adding one more option to SAVE_ALL can be used in common_exception to
simplify things. This also saves duplication later where page_fault will no
longer use common_exception.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: bp@alien8.de
Cc: torvalds@linux-foundation.org
Cc: hpa@zytor.com
Cc: dave.hansen@linux.intel.com
Cc: jgross@suse.com
Cc: zhe.he@windriver.com
Cc: joel@joelfernandes.org
Cc: devel@etsukata.com
Link: https://lkml.kernel.org/r/20190711114335.945136187@infradead.org
|
|
The one paravirt read_cr2() implementation (Xen) is actually quite trivial
and doesn't need to clobber anything other than the return register.
Making read_cr2() CALLEE_SAVE avoids all the PUSH/POP nonsense and allows
more convenient use from assembly.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: bp@alien8.de
Cc: rostedt@goodmis.org
Cc: luto@kernel.org
Cc: torvalds@linux-foundation.org
Cc: hpa@zytor.com
Cc: dave.hansen@linux.intel.com
Cc: zhe.he@windriver.com
Cc: joel@joelfernandes.org
Cc: devel@etsukata.com
Link: https://lkml.kernel.org/r/20190711114335.887392493@infradead.org
|
|
Commit 61abdbe0bcc2 ("kvm: x86: make lapic hrtimer pinned") pinned the
lapic timer to avoid to wait until the next kvm exit for the guest to
see KVM_REQ_PENDING_TIMER set. There is another solution to give a kick
after setting the KVM_REQ_PENDING_TIMER bit, make lapic timer unpinned
will be used in follow up patches.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Merge more updates from Andrew Morton:
"VM:
- z3fold fixes and enhancements by Henry Burns and Vitaly Wool
- more accurate reclaimed slab caches calculations by Yafang Shao
- fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by
Christoph Hellwig
- !CONFIG_MMU fixes by Christoph Hellwig
- new novmcoredd parameter to omit device dumps from vmcore, by
Kairui Song
- new test_meminit module for testing heap and pagealloc
initialization, by Alexander Potapenko
- ioremap improvements for huge mappings, by Anshuman Khandual
- generalize kprobe page fault handling, by Anshuman Khandual
- device-dax hotplug fixes and improvements, by Pavel Tatashin
- enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V
- add pte_devmap() support for arm64, by Robin Murphy
- unify locked_vm accounting with a helper, by Daniel Jordan
- several misc fixes
core/lib:
- new typeof_member() macro including some users, by Alexey Dobriyan
- make BIT() and GENMASK() available in asm, by Masahiro Yamada
- changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better
code generation, by Alexey Dobriyan
- rbtree code size optimizations, by Michel Lespinasse
- convert struct pid count to refcount_t, by Joel Fernandes
get_maintainer.pl:
- add --no-moderated switch to skip moderated ML's, by Joe Perches
misc:
- ptrace PTRACE_GET_SYSCALL_INFO interface
- coda updates
- gdb scripts, various"
[ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
fs/select.c: use struct_size() in kmalloc()
mm: add account_locked_vm utility function
arm64: mm: implement pte_devmap support
mm: introduce ARCH_HAS_PTE_DEVMAP
mm: clean up is_device_*_page() definitions
mm/mmap: move common defines to mman-common.h
mm: move MAP_SYNC to asm-generic/mman-common.h
device-dax: "Hotremove" persistent memory that is used like normal RAM
mm/hotplug: make remove_memory() interface usable
device-dax: fix memory and resource leak if hotplug fails
include/linux/lz4.h: fix spelling and copy-paste errors in documentation
ipc/mqueue.c: only perform resource calculation if user valid
include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
scripts/gdb: add helpers to find and list devices
scripts/gdb: add lx-genpd-summary command
drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
kernel/pid.c: convert struct pid count to refcount_t
drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
...
|
|
As commit 1e0221374e30 ("mips: vdso: drop unnecessary cc-ldoption")
explained, these flags are supported by the minimal required version
of binutils. They are supported by ld.lld too.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
|
|
Somehow the swapgs mitigation entry code patch ended up with a JMPQ
instruction instead of JMP, where only the short jump is needed. Some
assembler versions apparently fail to optimize JMPQ into a two-byte JMP
when possible, instead always using a 7-byte JMP with relocation. For
some reason that makes the entry code explode with a #GP during boot.
Change it back to "JMP" as originally intended.
Fixes: 18ec54fdd6d1 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
To avoid semantic inconsistency, the fixed_counters in Intel vPMU
need to be reset to 0 in intel_pmu_reset() as gp_counters does.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 7457c0da024b ("x86/alternatives: Add int3_emulate_call()
selftest") is used to ensure there is a gap setup in int3 exception stack
which could be used for inserting call return address.
This gap is missed in XEN PV int3 exception entry path, then below panic
triggered:
[ 0.772876] general protection fault: 0000 [#1] SMP NOPTI
[ 0.772886] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0+ #11
[ 0.772893] RIP: e030:int3_magic+0x0/0x7
[ 0.772905] RSP: 3507:ffffffff82203e98 EFLAGS: 00000246
[ 0.773334] Call Trace:
[ 0.773334] alternative_instructions+0x3d/0x12e
[ 0.773334] check_bugs+0x7c9/0x887
[ 0.773334] ? __get_locked_pte+0x178/0x1f0
[ 0.773334] start_kernel+0x4ff/0x535
[ 0.773334] ? set_init_arg+0x55/0x55
[ 0.773334] xen_start_kernel+0x571/0x57a
For 64bit PV guests, Xen's ABI enters the kernel with using SYSRET, with
%rcx/%r11 on the stack. To convert back to "normal" looking exceptions,
the xen thunks do 'xen_*: pop %rcx; pop %r11; jmp *'.
E.g. Extracting 'xen_pv_trap xenint3' we have:
xen_xenint3:
pop %rcx;
pop %r11;
jmp xenint3
As xenint3 and int3 entry code are same except xenint3 doesn't generate
a gap, we can fix it by using int3 and drop useless xenint3.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
PVH guest needs PV extentions to work, so "nopv" parameter should be
ignored for PVH but not for HVM guest.
If PVH guest boots up via the Xen-PVH boot entry, xen_pvh is set early,
we know it's PVH guest and ignore "nopv" parameter directly.
If PVH guest boots up via the normal boot entry same as HVM guest, it's
hard to distinguish PVH and HVM guest at that time. In this case, we
have to panic early if PVH is detected and nopv is enabled to avoid a
worse situation later.
Remove static from bool_x86_init_noop/x86_op_int_noop so they could be
used globally. Move xen_platform_hvm() after xen_hvm_guest_late_init()
to avoid compile error.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
.. as "nopv" support needs it to be changeable at boot up stage.
Checkpatch reports warning, so move variable declarations from
hypervisor.c to hypervisor.h
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Clean up unnecessory code after that operation.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In virtualization environment, PV extensions (drivers, interrupts,
timers, etc) are enabled in the majority of use cases which is the
best option.
However, in some cases (kexec not fully working, benchmarking)
we want to disable PV extensions. We have "xen_nopv" for that purpose
but only for XEN. For a consistent admin experience a common command
line parameter "nopv" set across all PV guest implementations is a
better choice.
There are guest types which just won't work without PV extensions,
like Xen PV, Xen PVH and jailhouse. add a "ignore_nopv" member to
struct hypervisor_x86 set to true for those guest types and call
the detect functions only if nopv is false or ignore_nopv is true.
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
.. as they are only called at early bootup stage. In fact, other
functions in x86_hyper_xen_hvm.init.* are all marked as __init.
Unexport xen_hvm_need_lapic as it's never used outside.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
initialized"
This reverts commit ca5d376e17072c1b60c3fee66f3be58ef018952d.
Commit 8990cac6e5ea ("x86/jump_label: Initialize static branching
early") adds jump_label_init() call in setup_arch() to make static
keys initialized early, so we could use the original simpler code
again.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
ARCH_HAS_ZONE_DEVICE is somewhat meaningless in itself, and combined
with the long-out-of-date comment can lead to the impression than an
architecture may just enable it (since __add_pages() now "comprehends
device memory" for itself) and expect things to work.
In practice, however, ZONE_DEVICE users have little chance of
functioning correctly without __HAVE_ARCH_PTE_DEVMAP, so let's clean
that up the same way as ARCH_HAS_PTE_SPECIAL and make it the proper
dependency so the real situation is clearer.
Link: http://lkml.kernel.org/r/87554aa78478a02a63f2c4cf60a847279ae3eb3b.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Architectures which support kprobes have very similar boilerplate around
calling kprobe_fault_handler(). Use a helper function in kprobes.h to
unify them, based on the x86 code.
This changes the behaviour for other architectures when preemption is
enabled. Previously, they would have disabled preemption while calling
the kprobe handler. However, preemption would be disabled if this fault
was due to a kprobe, so we know the fault was not due to a kprobe
handler and can simply return failure.
This behaviour was introduced in commit a980c0ef9f6d ("x86/kprobes:
Refactor kprobes_fault() like kprobe_exceptions_notify()")
[anshuman.khandual@arm.com: export kprobe_fault_handler()]
Link: http://lkml.kernel.org/r/1561133358-8876-1-git-send-email-anshuman.khandual@arm.com
Link: http://lkml.kernel.org/r/1560420444-25737-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Finish up what commit c2febafc6773 ("mm: convert generic code to 5-level
paging") started while levelling up P4D huge mapping support at par with
PUD and PMD. A new arch call back arch_ioremap_p4d_supported() is added
which just maintains status quo (P4D huge map not supported) on x86,
arm64 and powerpc.
When HAVE_ARCH_HUGE_VMAP is enabled its just a simple check from the
arch about the support, hence runtime effects are minimal.
Link: http://lkml.kernel.org/r/1561699231-20991-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
isa_page_to_bus() is deprecated and is no longer used anywhere. Remove
it entirely.
Link: http://lkml.kernel.org/r/20190613161155.16946-1-steve@sk2.org
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At release_thread(), ->mm is NULL; and it is fine for the former mm to
still have an LDT. Delete this check in process_64.c, similar to
commit 2684927c6b93 ("[PATCH] x86: Deprecate useless bug"), which did the
same in process_32.c.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190712224152.13129-1-jannh@google.com
|
|
clang warns about a few parts of the math-emu implementation
where a 16-bit integer becomes negative during assignment:
arch/x86/math-emu/poly_tan.c:88:35: error: implicit conversion from 'int' to 'short' changes value from 49216 to -16320 [-Werror,-Wconstant-conversion]
(0x41 + EXTENDED_Ebias) | SIGN_Negative);
~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
arch/x86/math-emu/fpu_emu.h:180:58: note: expanded from macro 'setexponent16'
#define setexponent16(x,y) { (*(short *)&((x)->exp)) = (y); }
~ ^
arch/x86/math-emu/reg_constant.c:37:32: error: implicit conversion from 'int' to 'short' changes value from 49085 to -16451 [-Werror,-Wconstant-conversion]
FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66,
^~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG'
((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:48:28: error: implicit conversion from 'int' to 'short' changes value from 65535 to -1 [-Werror,-Wconstant-conversion]
FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG'
((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
The code is correct as is, so add a typecast to shut up the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190712090816.350668-1-arnd@arndb.de
|
|
This fixes the following coccinelle warning:
./arch/x86/kernel/e820.c:89:9-10: WARNING: return of 0/1 in function '_e820__mapped_any' with return type bool
Return type bool instead of 0/1.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1563158829-44373-1-git-send-email-wang.yi59@zte.com.cn
|
|
There are many compiler warnings like this,
In file included from ./arch/x86/include/asm/smp.h:13,
from ./arch/x86/include/asm/mmzone_64.h:11,
from ./arch/x86/include/asm/mmzone.h:5,
from ./include/linux/mmzone.h:969,
from ./include/linux/gfp.h:6,
from ./include/linux/mm.h:10,
from arch/x86/kernel/apic/io_apic.c:34:
arch/x86/kernel/apic/io_apic.c: In function 'check_timer':
./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
if ((v) <= apic_verbosity) \
^~
arch/x86/kernel/apic/io_apic.c:2160:2: note: in expansion of macro
'apic_printk'
apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
^~~~~~~~~~~
./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
if ((v) <= apic_verbosity) \
^~
arch/x86/kernel/apic/io_apic.c:2207:4: note: in expansion of macro
'apic_printk'
apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
^~~~~~~~~~~
APIC_QUIET is 0, so silence them by making apic_verbosity type int.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1562621805-24789-1-git-send-email-cai@lca.pw
|
|
The contents of sme_early_buffer should be cleared after
__sme_early_enc_dec() because it is used to move encrypted and decrypted
data, but since __sme_early_enc_dec() is __init this buffer simply can be
freed after init.
This saves a page that is otherwise unreferenced after init.
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907101318170.197432@chino.kir.corp.google.com
|
|
When default_get_smp_config() is called with early == 1 and mpf->feature1
is non-zero, mpf is leaked because the return path does not do
early_memunmap().
Fix this and share a common exit routine.
Fixes: 5997efb96756 ("x86/boot: Use memremap() to map the MPF and MPC data")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091942570.28240@chino.kir.corp.google.com
|
|
If a device doesn't support DMA to a physical address that includes the
encryption bit (currently bit 47, so 48-bit DMA), then the DMA must
occur to unencrypted memory. SWIOTLB is used to satisfy that requirement
if an IOMMU is not active (enabled or configured in passthrough mode).
However, commit fafadcd16595 ("swiotlb: don't dip into swiotlb pool for
coherent allocations") modified the coherent allocation support in
SWIOTLB to use the DMA direct coherent allocation support. When an IOMMU
is not active, this resulted in dma_alloc_coherent() failing for devices
that didn't support DMA addresses that included the encryption bit.
Addressing this requires changes to the force_dma_unencrypted() function
in kernel/dma/direct.c. Since the function is now non-trivial and
SME/SEV specific, update the DMA direct support to add an arch override
for the force_dma_unencrypted() function. The arch override is selected
when CONFIG_AMD_MEM_ENCRYPT is set. The arch override function resides in
the arch/x86/mm/mem_encrypt.c file and forces unencrypted DMA when either
SEV is active or SME is active and the device does not support DMA to
physical addresses that include the encryption bit.
Fixes: fafadcd16595 ("swiotlb: don't dip into swiotlb pool for coherent allocations")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
[hch: moved the force_dma_unencrypted declaration to dma-mapping.h,
fold the s390 fix from Halil Pasic]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull rst conversion of docs from Mauro Carvalho Chehab:
"As agreed with Jon, I'm sending this big series directly to you, c/c
him, as this series required a special care, in order to avoid
conflicts with other trees"
* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
docs: kbuild: fix build with pdf and fix some minor issues
docs: block: fix pdf output
docs: arm: fix a breakage with pdf output
docs: don't use nested tables
docs: gpio: add sysfs interface to the admin-guide
docs: locking: add it to the main index
docs: add some directories to the main documentation index
docs: add SPDX tags to new index files
docs: add a memory-devices subdir to driver-api
docs: phy: place documentation under driver-api
docs: serial: move it to the driver-api
docs: driver-api: add remaining converted dirs to it
docs: driver-api: add xilinx driver API documentation
docs: driver-api: add a series of orphaned documents
docs: admin-guide: add a series of orphaned documents
docs: cgroup-v1: add it to the admin-guide book
docs: aoe: add it to the driver-api book
docs: add some documentation dirs to the driver-api book
docs: driver-model: move it to the driver-api book
docs: lp855x-driver.rst: add it to the driver-api book
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd and clone3 fixes from Christian Brauner:
"This contains a bugfix for CLONE_PIDFD when used with the legacy clone
syscall, two fixes to ensure that syscall numbering and clone3
entrypoint implementations will stay consistent, and an update for the
maintainers file:
- The addition of clone3 broke CLONE_PIDFD for legacy clone on all
architectures that use do_fork() directly instead of calling the
clone syscall itself. (Fwiw, cleaning do_fork() up is on my todo.)
The reason this happened was that during conversion of _do_fork()
to use struct kernel_clone_args we missed that do_fork() is called
directly by various architectures. This is fixed by making sure
that the pidfd argument in struct kernel_clone_args is correctly
initialized with the parent_tidptr argument passed down from
do_fork(). Additionally, do_fork() missed a check to make
CLONE_PIDFD and CLONE_PARENT_SETTID mutually exclusive just a
clone() does. This is now fixed too.
- When clone3() was introduced we skipped architectures that require
special handling for fork-like syscalls. Their syscall tables did
not contain any mention of clone3().
To make sure that Arnd's work to make syscall numbers on all
architectures identical (minus alpha) was not for naught we are
placing a comment in all syscall tables that do not yet implement
clone3(). The comment makes it clear that 435 is reserved for
clone3 and should not be used.
- Also, this contains a patch to make the clone3() syscall definition
in asm-generic/unist.h conditional on __ARCH_WANT_SYS_CLONE3. This
lets us catch new architectures that implicitly make use of clone3
without setting __ARCH_WANT_SYS_CLONE3 which is a good indicator
that they did not check whether it needs special treatment or not.
- Finally, this contains a patch to add me as maintainer for pidfd
stuff so people can start blaming me (more)"
* tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
MAINTAINERS: add new entry for pidfd api
unistd: protect clone3 via __ARCH_WANT_SYS_CLONE3
arch: mark syscall number 435 reserved for clone3
clone: fix CLONE_PIDFD support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration changes:
- Evaluate PCI Boot Configuration _DSM to learn if firmware wants us
to preserve its resource assignments (Benjamin Herrenschmidt)
- Simplify resource distribution (Nicholas Johnson)
- Decode 32 GT/s link speed (Gustavo Pimentel)
Virtualization:
- Fix incorrect caching of VF config space size (Alex Williamson)
- Fix VF driver probing sysfs knobs (Alex Williamson)
Peer-to-peer DMA:
- Fix dma_virt_ops check (Logan Gunthorpe)
Altera host bridge driver:
- Allow building as module (Ley Foon Tan)
Armada 8K host bridge driver:
- add PHYs support (Miquel Raynal)
DesignWare host bridge driver:
- Export APIs to support removable loadable module (Vidya Sagar)
- Enable Relaxed Ordering erratum workaround only on Tegra20 &
Tegra30 (Vidya Sagar)
Hyper-V host bridge driver:
- Fix use-after-free in eject (Dexuan Cui)
Mobiveil host bridge driver:
- Clean up and fix many issues, including non-identify mapped
windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou
Zhiqiang)
Qualcomm host bridge driver:
- Use clk bulk API for 2.4.0 controllers (Bjorn Andersson)
- Add QCS404 support (Bjorn Andersson)
- Assert PERST for at least 100ms (Niklas Cassel)
R-Car host bridge driver:
- Add r8a774a1 DT support (Biju Das)
Tegra host bridge driver:
- Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol
details) AER, GPIO-based PERST# (Manikanta Maddireddy)
- Fix many issues, including power-on failure cases, interrupt
masking in suspend, UPHY settings, AFI dynamic clock gating,
pending DLL transactions (Manikanta Maddireddy)
Xilinx host bridge driver:
- Fix NWL Multi-MSI programming (Bharat Kumar Gogada)
Endpoint support:
- Fix 64bit BAR support (Alan Mikhak)
- Fix pcitest build issues (Alan Mikhak, Andy Shevchenko)
Bug fixes:
- Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu)
- Fix NVIDIA GPU HDA enablement issue (Lukas Wunner)
- Ignore lockdep for sysfs "remove" (Marek Vasut)
Misc:
- Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"
* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
PCI: Enable NVIDIA HDA controllers
tools: PCI: Fix installation when `make tools/pci_install`
PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
PCI: Fix typos and whitespace errors
PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
PCI: mobiveil: Fix infinite-loop in the INTx handling function
PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
PCI: mobiveil: Clear the control fields before updating it
PCI: mobiveil: Add configured inbound windows counter
PCI: mobiveil: Fix the valid check for inbound and outbound windows
PCI: mobiveil: Clean-up program_{ib/ob}_windows()
PCI: mobiveil: Remove an unnecessary return value check
PCI: mobiveil: Fix error return values
PCI: mobiveil: Refactor the MEM/IO outbound window initialization
PCI: mobiveil: Make some register updates more readable
PCI: mobiveil: Reformat the code for readability
dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
...
|
|
As reported by Maxime at
https://bugzilla.kernel.org/show_bug.cgi?id=204175:
In vmx/nested.c::get_vmx_mem_address(), when the guest runs in long mode,
the base address of the memory operand is computed with a simple:
*ret = s.base + off;
This is incorrect, the base applies only to FS and GS, not to the others.
Because of that, if the guest uses a VMX instruction based on DS and has
a DS.base that is non-zero, KVM wrongfully adds the base to the
resulting address.
Reported-by: Maxime Villard <max@m00nbsd.net>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The ioapic_debug and apic_debug have been not used
for years, and kvm tracepoints are enough for debugging,
so remove them as Paolo suggested.
However, there may be something wrong when pv evi get/put
user, so it's better to retain some log there.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
the test
This reverts commit 48f5e52e916b55fb73754833efbacc7f8081a159.
The ptrace ABI change was a prerequisite to the proposed design for
FSGSBASE. Since FSGSBASE support has been reverted, and since I'm not
convinced that the ABI was ever adequately tested, revert the ABI change as
well.
This also modifies the test case so that it tests the preexisting behavior.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/fca39c478ea7fb15bc76fe8a36bd180810a067f6.1563200250.git.luto@kernel.org
|
|
There are lots of documents that belong to the admin-guide but
are on random places (most under Documentation root dir).
Move them to the admin guide.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
The Kdump documentation describes procedures with admins use
in order to solve issues on their systems.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
There are some pr_debug in TSC code, which may have
been no use, so remove them as Paolo suggested.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|