| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- three fixes and a cleanup for the resctrl code
- a HyperV fix
- a fix to /proc/kcore contents in live debugging sessions
- a fix for the x86 decoder opcode map"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/decoder: Add TEST opcode to Group3-2
x86/resctrl: Clean up unused function parameter in mkdir path
x86/resctrl: Fix a deadlock due to inaccurate reference
x86/resctrl: Fix use-after-free due to inaccurate refcount of rdtgroup
x86/resctrl: Fix use-after-free when deleting resource groups
x86/hyper-v: Add "polling" bit to hv_synic_sint
x86/crash: Define arch_crash_save_vmcoreinfo() if CONFIG_CRASH_CORE=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Ingo Molnar:
"Misc changes:
- Enhance #GP fault printouts by distinguishing between canonical and
non-canonical address faults, and also add KASAN fault decoding.
- Fix/enhance the x86 NMI handler by putting the duration check into
a direct function call instead of an irq_work which we know to be
broken in some cases.
- Clean up do_general_protection() a bit"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Remove irq_work from the long duration NMI handler
x86/traps: Cleanup do_general_protection()
x86/kasan: Print original address on #GP
x86/dumpstack: Introduce die_addr() for die() with #GP fault address
x86/traps: Print address on #GP
x86/insn-eval: Add support for 64-bit kernel mode
|
|
Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does.
Commit
12a78d43de76 ("x86/decoder: Add new TEST instruction pattern")
added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did
not add f7 XX/001/XXX (Group 3-2).
Actually, this TEST opcode variant (ModRM.reg /1) is not described in
the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3,
Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map.
Without this fix, Randy found a warning by insn_decoder_test related
to this issue as below.
HOSTCC arch/x86/tools/insn_decoder_test
HOSTCC arch/x86/tools/insn_sanity
TEST posttest
arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this.
arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx)
arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2
arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures
TEST posttest
arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c)
To fix this error, add the TEST opcode according to AMD64 APM Vol.3.
[ bp: Massage commit message. ]
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2
|
|
>From the Intel Optimization Reference Manual:
3.7.6.1 Fast Short REP MOVSB
Beginning with processors based on Ice Lake Client microarchitecture,
REP MOVSB performance of short operations is enhanced. The enhancement
applies to string lengths between 1 and 128 bytes long. Support for
fast-short REP MOVSB is enumerated by the CPUID feature flag: CPUID
[EAX=7H, ECX=0H).EDX.FAST_SHORT_REP_MOVSB[bit 4] = 1. There is no change
in the REP STOS performance.
Add an X86_FEATURE_FSRM flag for this.
memmove() avoids REP MOVSB for short (< 32 byte) copies. Check FSRM and
use REP MOVSB for short copies on systems that support it.
[ bp: Massage and add comment. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191216214254.26492-1-tony.luck@intel.com
|
|
To support evaluating 64-bit kernel mode instructions:
* Replace existing checks for user_64bit_mode() with a new helper that
checks whether code is being executed in either 64-bit kernel mode or
64-bit user mode.
* Select the GS base depending on whether the instruction is being
evaluated in kernel mode.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191218231150.12139-1-jannh@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf script:
Adrian Hunter:
- Fix brstackinsn for AUXTRACE.
- Fix invalid LBR/binary mismatch error.
perf diff:
Arnaldo Carvalho de Melo:
- Use llabs() with 64-bit values, fixing the build in some 32-bit
architectures.
perf pmu:
Andi Kleen:
- Use file system cache to optimize sysfs access.
x86:
Adrian Hunter:
- Add some more Intel instructions to the opcode map and to the perf
test entry:
gf2p8affineinvqb, gf2p8affineqb, gf2p8mulb, v4fmaddps,
v4fmaddss, v4fnmaddps, v4fnmaddss, vaesdec, vaesdeclast, vaesenc,
vaesenclast, vcvtne2ps2bf16, vcvtneps2bf16, vdpbf16ps,
vgf2p8affineinvqb, vgf2p8affineqb, vgf2p8mulb, vp2intersectd,
vp2intersectq, vp4dpwssd, vp4dpwssds, vpclmulqdq, vpcompressb,
vpcompressw, vpdpbusd, vpdpbusds, vpdpwssd, vpdpwssds, vpexpandb,
vpexpandw, vpopcntb, vpopcntd, vpopcntq, vpopcntw, vpshldd, vpshldq,
vpshldvd, vpshldvq, vpshldvw, vpshldw, vpshrdd, vpshrdq, vpshrdvd,
vpshrdvq, vpshrdvw, vpshrdw, vpshufbitqmb.
perf affinity:
Andi Kleen:
- Add infrastructure to save/restore affinity
perf maps:
Arnaldo Carvalho de Melo:
- Merge 'struct maps' with 'struct map_groups', as there is a
1x1 relationship, simplifying code overal.
perf build:
Jiri Olsa:
- Allow to link with libbpf dynamicaly.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"The main kernel side changes in this cycle were:
- Various Intel-PT updates and optimizations (Alexander Shishkin)
- Prohibit kprobes on Xen/KVM emulate prefixes (Masami Hiramatsu)
- Add support for LSM and SELinux checks to control access to the
perf syscall (Joel Fernandes)
- Misc other changes, optimizations, fixes and cleanups - see the
shortlog for details.
There were numerous tooling changes as well - 254 non-merge commits.
Here are the main changes - too many to list in detail:
- Enhancements to core tooling infrastructure, perf.data, libperf,
libtraceevent, event parsing, vendor events, Intel PT, callchains,
BPF support and instruction decoding.
- There were updates to the following tools:
perf annotate
perf diff
perf inject
perf kvm
perf list
perf maps
perf parse
perf probe
perf record
perf report
perf script
perf stat
perf test
perf trace
- And a lot of other changes: please see the shortlog and Git log for
more details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (279 commits)
perf parse: Fix potential memory leak when handling tracepoint errors
perf probe: Fix spelling mistake "addrees" -> "address"
libtraceevent: Fix memory leakage in copy_filter_type
libtraceevent: Fix header installation
perf intel-bts: Does not support AUX area sampling
perf intel-pt: Add support for decoding AUX area samples
perf intel-pt: Add support for recording AUX area samples
perf pmu: When using default config, record which bits of config were changed by the user
perf auxtrace: Add support for queuing AUX area samples
perf session: Add facility to peek at all events
perf auxtrace: Add support for dumping AUX area samples
perf inject: Cut AUX area samples
perf record: Add aux-sample-size config term
perf record: Add support for AUX area sampling
perf auxtrace: Add support for AUX area sample recording
perf auxtrace: Move perf_evsel__find_pmu()
perf record: Add a function to test for kernel support for AUX area sampling
perf tools: Add kernel AUX area sampling definitions
perf/core: Make the mlock accounting simple again
perf report: Jump to symbol source view from total cycles view
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- Cross-arch changes to move the linker sections for NOTES and
EXCEPTION_TABLE into the RO_DATA area, where they belong on most
architectures. (Kees Cook)
- Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
trap jumps into the middle of those padding areas instead of
sliding execution. (Kees Cook)
- A thorough cleanup of symbol definitions within x86 assembler code.
The rather randomly named macros got streamlined around a
(hopefully) straightforward naming scheme:
SYM_START(name, linkage, align...)
SYM_END(name, sym_type)
SYM_FUNC_START(name)
SYM_FUNC_END(name)
SYM_CODE_START(name)
SYM_CODE_END(name)
SYM_DATA_START(name)
SYM_DATA_END(name)
etc - with about three times of these basic primitives with some
label, local symbol or attribute variant, expressed via postfixes.
No change in functionality intended. (Jiri Slaby)
- Misc other changes, cleanups and smaller fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
x86/entry/64: Remove pointless jump in paranoid_exit
x86/entry/32: Remove unused resume_userspace label
x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
m68k: Convert missed RODATA to RO_DATA
x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
x86/mm: Report actual image regions in /proc/iomem
x86/mm: Report which part of kernel image is freed
x86/mm: Remove redundant address-of operators on addresses
xtensa: Move EXCEPTION_TABLE to RO_DATA segment
powerpc: Move EXCEPTION_TABLE to RO_DATA segment
parisc: Move EXCEPTION_TABLE to RO_DATA segment
microblaze: Move EXCEPTION_TABLE to RO_DATA segment
ia64: Move EXCEPTION_TABLE to RO_DATA segment
h8300: Move EXCEPTION_TABLE to RO_DATA segment
c6x: Move EXCEPTION_TABLE to RO_DATA segment
arm64: Move EXCEPTION_TABLE to RO_DATA segment
alpha: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Actually use _etext for the end of the text segment
vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
...
|
|
Add to the opcode map the following instructions:
v4fmaddps
v4fmaddss
v4fnmaddps
v4fnmaddss
vaesdec
vaesdeclast
vaesenc
vaesenclast
vcvtne2ps2bf16
vcvtneps2bf16
vdpbf16ps
gf2p8affineinvqb
vgf2p8affineinvqb
gf2p8affineqb
vgf2p8affineqb
gf2p8mulb
vgf2p8mulb
vp2intersectd
vp2intersectq
vp4dpwssd
vp4dpwssds
vpclmulqdq
vpcompressb
vpcompressw
vpdpbusd
vpdpbusds
vpdpwssd
vpdpwssds
vpexpandb
vpexpandw
vpopcntb
vpopcntd
vpopcntq
vpopcntw
vpshldd
vpshldq
vpshldvd
vpshldvq
vpshldvw
vpshldw
vpshrdd
vpshrdq
vpshrdvd
vpshrdvq
vpshrdvw
vpshrdw
vpshufbitqmb
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions May
2019 (319433-037).
The instruction decoding can be tested using the perf tools' "x86
instruction decoder - new instructions" test e.g.
$ perf test -v "new " 2>&1 | grep -i 'v4fmaddps'
Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4
Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4
Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%rax),%zmm0,%zmm4
Decoded ok: 67 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4
Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%rax,%rcx,8),%zmm0,%zmm4
Decoded ok: 67 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191125125044.31879-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
completed topic tree
Conflicts:
tools/perf/check-headers.sh
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add to the opcode map the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
$ perf test -v "new " 2>&1 | grep -i cldemote
Decoded ok: 0f 1c 00 cldemote (%eax)
Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
Decoded ok: 0f 1c 00 cldemote (%rax)
Decoded ok: 41 0f 1c 00 cldemote (%r8)
Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
$ perf test -v "new " 2>&1 | grep -i tpause
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 41 0f ae f0 tpause %r8d
$ perf test -v "new " 2>&1 | grep -i umonitor
Decoded ok: 67 f3 0f ae f0 umonitor %ax
Decoded ok: f3 0f ae f0 umonitor %eax
Decoded ok: 67 f3 0f ae f0 umonitor %eax
Decoded ok: f3 0f ae f0 umonitor %rax
Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d
$ perf test -v "new " 2>&1 | grep -i umwait
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 41 0f ae f0 umwait %r8d
$ perf test -v "new " 2>&1 | grep -i movdiri
Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx)
Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax)
Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx)
Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax)
$ perf test -v "new " 2>&1 | grep -i movdir64b
Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx
Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx
Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx
Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmd
Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx
Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx
Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmds
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i encls
Decoded ok: 0f 01 cf encls
Decoded ok: 0f 01 cf encls
$ perf test -v "new " 2>&1 | grep -i enclu
Decoded ok: 0f 01 d7 enclu
Decoded ok: 0f 01 d7 enclu
$ perf test -v "new " 2>&1 | grep -i enclv
Decoded ok: 0f 01 c0 enclv
Decoded ok: 0f 01 c0 enclv
$ perf test -v "new " 2>&1 | grep -i pconfig
Decoded ok: 0f 01 c5 pconfig
Decoded ok: 0f 01 c5 pconfig
$ perf test -v "new " 2>&1 | grep -i wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These are all functions which are invoked from elsewhere, so annotate
them as global using the new SYM_FUNC_START and their ENDPROC's by
SYM_FUNC_END.
Now, ENTRY/ENDPROC can be forced to be undefined on X86, so do so.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Bill Metzenthen <billm@melbpc.org.au>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: platform-driver-x86@vger.kernel.org
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191011115108.12392-28-jslaby@suse.cz
|
|
These are all functions which are invoked from elsewhere, so annotate
them as global using the new SYM_FUNC_START and their ENDPROC's by
SYM_FUNC_END.
Make sure ENTRY/ENDPROC is not defined on X86_64, given these were the
last users.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [hibernate]
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen bits]
Acked-by: Herbert Xu <herbert@gondor.apana.org.au> [crypto]
Cc: Allison Randal <allison@lohutok.net>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Armijn Hemel <armijn@tjaldur.nl>
Cc: Cao jin <caoj.fnst@cn.fujitsu.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Enrico Weigelt <info@metux.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Wei Huang <wei@redhat.com>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Cc: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Link: https://lkml.kernel.org/r/20191011115108.12392-25-jslaby@suse.cz
|
|
There are a couple of assembly functions which are invoked only locally
in the file they are defined. In C, they are marked "static". In
assembly, annotate them using SYM_{FUNC,CODE}_START_LOCAL (and switch
their ENDPROC to SYM_{FUNC,CODE}_END too). Whether FUNC or CODE is used,
depends on whether ENDPROC or END was used for a particular function
before.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20191011115108.12392-21-jslaby@suse.cz
|
|
_key_expansion_128 is an alias to _key_expansion_256a, __memcpy to
memcpy, xen_syscall32_target to xen_sysenter_target, and so on. Annotate
them all using the new SYM_FUNC_START_ALIAS, SYM_FUNC_START_LOCAL_ALIAS,
and SYM_FUNC_END_ALIAS. This will make the tools generating the
debuginfo happy as it avoids nesting and double symbols.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Juergen Gross <jgross@suse.com> [xen parts]
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20191011115108.12392-10-jslaby@suse.cz
|
|
.Lcopy_user_handle_tail is a self-standing local function, annotate it
as such using SYM_CODE_START_LOCAL.
Again, no functional change, just documentation.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-arch@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191011115108.12392-9-jslaby@suse.cz
|
|
Use the newly added SYM_CODE_START_LOCAL* to annotate beginnings of
all pseudo-functions (those ending with END until now) which do not
have ".globl" annotation. This is needed to balance END for tools that
generate debuginfo. Note that ENDs are switched to SYM_CODE_END too so
that everybody can see the pairing.
C-like functions (which handle frame ptr etc.) are not annotated here,
hence SYM_CODE_* macros are used here, not SYM_FUNC_*. Note that the
32bit version of early_idt_handler_common already had ENDPROC -- switch
that to SYM_CODE_END for the same reason as above (and to be the same as
64bit).
While early_idt_handler_common is LOCAL, it's name is not prepended with
".L" as it happens to appear in call traces.
bad_get_user*, and bad_put_user are now aligned, as they are separate
functions. They do not mind to be aligned -- no need to be compact
there.
early_idt_handler_common is aligned now too, as it is after
early_idt_handler_array, so as well no need to be compact there.
verify_cpu is self-standing and included in other .S files, so align it
too.
The others have alignment preserved to what it used to be (using the
_NOALIGN variant of macros).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cao jin <caoj.fnst@cn.fujitsu.com>
Cc: Enrico Weigelt <info@metux.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: linux-arch@vger.kernel.org
Cc: Maran Wilson <maran.wilson@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191011115108.12392-6-jslaby@suse.cz
|
|
Decode Xen and KVM's emulate-prefix signature by x86 insn decoder.
It is called "prefix" but actually not x86 instruction prefix, so
this adds insn.emulate_prefix_size field instead of reusing
insn.prefixes.
If x86 decoder finds a special sequence of instructions of
XEN_EMULATE_PREFIX and 'ud2a; .ascii "kvm"', it just counts the
length, set insn.emulate_prefix_size and fold it with the next
instruction. In other words, the signature and the next instruction
is treated as a single instruction.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: x86@kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: xen-devel@lists.xenproject.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/156777564986.25081.4964537658500952557.stgit@devnote2
|
|
As per "AMD64 Architecture Programmer's Manual Volume 3: General-Purpose
and System Instructions", MWAITX EAX[7:4]+1 specifies the optional hint
of the optimized C-state. For C0 state, EAX[7:4] should be set to 0xf.
Currently, a value of 0xf is set for EAX[3:0] instead of EAX[7:4]. Fix
this by changing MWAITX_DISABLE_CSTATES from 0xf to 0xf0.
This hasn't had any implications so far because setting reserved bits in
EAX is simply ignored by the CPU.
[ bp: Fixup comment in delay_mwaitx() and massage. ]
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20191007190011.4859-1-Janakarajan.Natarajan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Boris suggests to make a local label (prepend ".L") to these functions
to eliminate them from the symbol table. These are functions with very
local names and really should not be visible anywhere.
Note that objtool won't see these functions anymore (to generate ORC
debug info). But all the functions are not annotated with ENDPROC, so
they won't have objtool's attention anyway.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cao jin <caoj.fnst@cn.fujitsu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve Winslow <swinslow@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Huang <wei@redhat.com>
Cc: x86-ml <x86@kernel.org>
Cc: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Link: https://lkml.kernel.org/r/20190906075550.23435-2-jslaby@suse.cz
|
|
When building with W=1, warnings about missing prototypes are emitted:
CC arch/x86/lib/cpu.o
arch/x86/lib/cpu.c:5:14: warning: no previous prototype for 'x86_family' [-Wmissing-prototypes]
5 | unsigned int x86_family(unsigned int sig)
| ^~~~~~~~~~
arch/x86/lib/cpu.c:18:14: warning: no previous prototype for 'x86_model' [-Wmissing-prototypes]
18 | unsigned int x86_model(unsigned int sig)
| ^~~~~~~~~
arch/x86/lib/cpu.c:33:14: warning: no previous prototype for 'x86_stepping' [-Wmissing-prototypes]
33 | unsigned int x86_stepping(unsigned int sig)
| ^~~~~~~~~~~~
Add the proper include file so the prototypes are there.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/42513.1565234837@turing-police
|
|
The same getuser/putuser error paths are used regardless of whether AC
is set. In non-exception failure cases, this results in an unnecessary
CLAC.
Fixes the following warnings:
arch/x86/lib/getuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
arch/x86/lib/putuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/bc14ded2755ae75bd9010c446079e113dbddb74b.1563413318.git.jpoimboe@redhat.com
|
|
After adding mcsafe_handle_tail() to the objtool uaccess safe list,
objtool reports:
arch/x86/lib/usercopy_64.o: warning: objtool: mcsafe_handle_tail()+0x0: call to __fentry__() with UACCESS enabled
With SMAP, this function is called with AC=1, so it needs to be careful
about which functions it calls. Disable the ftrace entry hook, which
can potentially pull in a lot of extra code.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/8e13d6f0da1c8a3f7603903da6cbf6d582bbfe10.1563413318.git.jpoimboe@redhat.com
|
|
After an objtool improvement, it's complaining about the CLAC in
copy_user_handle_tail():
arch/x86/lib/copy_user_64.o: warning: objtool: .altinstr_replacement+0x12: redundant UACCESS disable
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x6: (alt)
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x2: (alt)
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x0: <=== (func)
copy_user_handle_tail() is incorrectly marked as a callable function, so
objtool is rightfully concerned about the CLAC with no corresponding
STAC.
Remove the ELF function annotation. The copy_user_handle_tail() code
path is already verified by objtool because it's jumped to by other
callable asm code (which does the corresponding STAC).
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6b6e436774678b4b9873811ff023bd29935bee5b.1563413318.git.jpoimboe@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP/hotplug updates from Thomas Gleixner:
"A small set of updates for SMP and CPU hotplug:
- Abort disabling secondary CPUs in the freezer when a wakeup is
pending instead of evaluating it only after all CPUs have been
offlined.
- Remove the shared annotation for the strict per CPU cfd_data in the
smp function call core code.
- Remove the return values of smp_call_function() and on_each_cpu()
as they are unconditionally 0. Fixup the few callers which actually
bothered to check the return value"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Remove smp_call_function() and on_each_cpu() return values
smp: Do not mark call_function_data as shared
cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending
cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()
|
|
The return value is fixed. Remove it and amend the callers.
[ tglx: Fixup arm/bL_switcher and powerpc/rtas ]
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20190613064813.8102-2-namit@vmware.com
|
|
Based on 1 normalized pattern(s):
this file is free software you can redistribute it and or modify it
under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 8 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081207.443595178@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this file is part of the linux kernel and is made available under
the terms of the gnu general public license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 28 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.534229504@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
|
|
get_desc() computes a pointer into the LDT while holding a lock that
protects the LDT from being freed, but then drops the lock and returns the
(now potentially dangling) pointer to its caller.
Fix it by giving the caller a copy of the LDT entry instead.
Fixes: 670f928ba09b ("x86/insn-eval: Add utility function to get segment descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
subject to the gnu public license v2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171440.222651153@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
subject to the gnu public license v 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 9 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171440.130801526@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Ingo Molnar:
"Two changes: an LTO improvement, plus the new 'nowatchdog' boot option
to disable the clocksource watchdog"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/timer: Don't inline __const_udelay()
x86/tsc: Add option to disable tsc clocksource watchdog
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"This includes the following changes:
- cpu_has() cleanups
- sync_bitops.h modernization to the rmwcc.h facility, similarly to
bitops.h
- continued LTO annotations/fixes
- misc cleanups and smaller cleanups"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/um/vdso: Drop unnecessary cc-ldoption
x86/vdso: Rename variable to fix -Wshadow warning
x86/cpu/amd: Exclude 32bit only assembler from 64bit build
x86/asm: Mark all top level asm statements as .text
x86/build/vdso: Add FORCE to the build rule of %.so
x86/asm: Modernize sync_bitops.h
x86/mm: Convert some slow-path static_cpu_has() callers to boot_cpu_has()
x86: Convert some slow-path static_cpu_has() callers to boot_cpu_has()
x86/asm: Clarify static_cpu_has()'s intended use
x86/uaccess: Fix implicit cast of __user pointer
x86/cpufeature: Remove __pure attribute to _static_cpu_has()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Here are the locking changes in this cycle:
- rwsem unification and simpler micro-optimizations to prepare for
more intrusive (and more lucrative) scalability improvements in
v5.3 (Waiman Long)
- Lockdep irq state tracking flag usage cleanups (Frederic
Weisbecker)
- static key improvements (Jakub Kicinski, Peter Zijlstra)
- misc updates, cleanups and smaller fixes"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
locking/lockdep: Remove unnecessary unlikely()
locking/static_key: Don't take sleeping locks in __static_key_slow_dec_deferred()
locking/static_key: Factor out the fast path of static_key_slow_dec()
locking/static_key: Add support for deferred static branches
locking/lockdep: Test all incompatible scenarios at once in check_irq_usage()
locking/lockdep: Avoid bogus Clang warning
locking/lockdep: Generate LOCKF_ bit composites
locking/lockdep: Use expanded masks on find_usage_*() functions
locking/lockdep: Map remaining magic numbers to lock usage mask names
locking/lockdep: Move valid_state() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING
locking/rwsem: Prevent unneeded warning during locking selftest
locking/rwsem: Optimize rwsem structure for uncontended lock acquisition
locking/rwsem: Enable lock event counting
locking/lock_events: Don't show pvqspinlock events on bare metal
locking/lock_events: Make lock_events available for all archs & other locks
locking/qspinlock_stat: Introduce generic lockevent_*() counting APIs
locking/rwsem: Enhance DEBUG_RWSEMS_WARN_ON() macro
locking/rwsem: Add debug check for __down_read*()
locking/rwsem: Micro-optimize rwsem_try_read_lock_unqueued()
locking/rwsem: Move rwsem internal function declarations to rwsem-xadd.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"This is a series from Peter Zijlstra that adds x86 build-time uaccess
validation of SMAP to objtool, which will detect and warn about the
following uaccess API usage bugs and weirdnesses:
- call to %s() with UACCESS enabled
- return with UACCESS enabled
- return with UACCESS disabled from a UACCESS-safe function
- recursive UACCESS enable
- redundant UACCESS disable
- UACCESS-safe disables UACCESS
As it turns out not leaking uaccess permissions outside the intended
uaccess functionality is hard when the interfaces are complex and when
such bugs are mostly dormant.
As a bonus we now also check the DF flag. We had at least one
high-profile bug in that area in the early days of Linux, and the
checking is fairly simple. The checks performed and warnings emitted
are:
- call to %s() with DF set
- return with DF set
- return with modified stack frame
- recursive STD
- redundant CLD
It's all x86-only for now, but later on this can also be used for PAN
on ARM and objtool is fairly cross-platform in principle.
While all warnings emitted by this new checking facility that got
reported to us were fixed, there might be GCC version dependent
warnings that were not reported yet - which we'll address, should they
trigger.
The warnings are non-fatal build warnings"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
mm/uaccess: Use 'unsigned long' to placate UBSAN warnings on older GCC versions
x86/uaccess: Dont leak the AC flag into __put_user() argument evaluation
sched/x86_64: Don't save flags on context switch
objtool: Add Direction Flag validation
objtool: Add UACCESS validation
objtool: Fix sibling call detection
objtool: Rewrite alt->skip_orig
objtool: Add --backtrace support
objtool: Rewrite add_ignores()
objtool: Handle function aliases
objtool: Set insn->func for alternatives
x86/uaccess, kcov: Disable stack protector
x86/uaccess, ftrace: Fix ftrace_likely_update() vs. SMAP
x86/uaccess, ubsan: Fix UBSAN vs. SMAP
x86/uaccess, kasan: Fix KASAN vs SMAP
x86/smap: Ditch __stringify()
x86/uaccess: Introduce user_access_{save,restore}()
x86/uaccess, signal: Fix AC=1 bloat
x86/uaccess: Always inline user_access_begin()
x86/uaccess, xen: Suppress SMAP warnings
...
|
|
Enablement of AMD's Secure Memory Encryption feature is determined very
early after start_kernel() is entered. Part of this procedure involves
scanning the command line for the parameter 'mem_encrypt'.
To determine intended state, the function sme_enable() uses library
functions cmdline_find_option() and strncmp(). Their use occurs early
enough such that it cannot be assumed that any instrumentation subsystem
is initialized.
For example, making calls to a KASAN-instrumented function before KASAN
is set up will result in the use of uninitialized memory and a boot
failure.
When AMD's SME support is enabled, conditionally disable instrumentation
of these dependent functions in lib/string.c and arch/x86/lib/cmdline.c.
[ bp: Get rid of intermediary nostackp var and cleanup whitespace. ]
Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption")
Reported-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: "dave.hansen@linux.intel.com" <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: "luto@kernel.org" <luto@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "mingo@redhat.com" <mingo@redhat.com>
Cc: "peterz@infradead.org" <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/155657657552.7116.18363762932464011367.stgit@sosrh3.amd.com
|
|
LTO will happily inline __const_udelay() everywhere it is used. Forcing it
noinline saves ~44k text in a LTO build.
13999560 1740864 1499136 17239560 1070e08 vmlinux-with-udelay-inline
13954764 1736768 1499136 17190668 1064f0c vmlinux-wo-udelay-inline
Even without LTO this function should never be inlined.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190330004743.29541-4-andi@firstfloor.org
|
|
With gcc toplevel assembler statements that do not mark themselves as .text
may end up in other sections. This causes LTO boot crashes because various
assembler statements ended up in the middle of the initcall section. It's
also a latent problem without LTO, although it's currently not known to
cause any real problems.
According to the gcc team it's expected behavior.
Always mark all the top level assembler statements as text so that they
switch to the right section.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190330004743.29541-1-andi@firstfloor.org
|
|
As the generic rwsem-xadd code is using the appropriate acquire and
release versions of the atomic operations, the arch specific rwsem.h
files will not be that much faster than the generic code as long as the
atomic functions are properly implemented. So we can remove those arch
specific rwsem.h and stop building asm/rwsem.h to reduce maintenance
effort.
Currently, only x86, alpha and ia64 have implemented architecture
specific fast paths. I don't have access to alpha and ia64 systems for
testing, but they are legacy systems that are not likely to be updated
to the latest kernel anyway.
By using a rwsem microbenchmark, the total locking rates on a 4-socket
56-core 112-thread x86-64 system before and after the patch were as
follows (mixed means equal # of read and write locks):
Before Patch After Patch
# of Threads wlock rlock mixed wlock rlock mixed
------------ ----- ----- ----- ----- ----- -----
1 29,201 30,143 29,458 28,615 30,172 29,201
2 6,807 13,299 1,171 7,725 15,025 1,804
4 6,504 12,755 1,520 7,127 14,286 1,345
8 6,762 13,412 764 6,826 13,652 726
16 6,693 15,408 662 6,599 15,938 626
32 6,145 15,286 496 5,549 15,487 511
64 5,812 15,495 60 5,858 15,572 60
There were some run-to-run variations for the multi-thread tests. For
x86-64, using the generic C code fast path seems to be a little bit
faster than the assembly version with low lock contention. Looking at
the assembly version of the fast paths, there are assembly to/from C
code wrappers that save and restore all the callee-clobbered registers
(7 registers on x86-64). The assembly generated from the generic C
code doesn't need to do that. That may explain the slight performance
gain here.
The generic asm rwsem.h can also be merged into kernel/locking/rwsem.h
with no code change as no other code other than those under
kernel/locking needs to access the internal rwsem macros and functions.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Link: https://lkml.kernel.org/r/20190322143008.21313-2-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
New tooling got confused about this:
arch/x86/lib/memcpy_64.o: warning: objtool: .fixup+0x7: return with UACCESS enabled
While the code isn't wrong, it is tedious (if at all possible) to
figure out what function a particular chunk of .fixup belongs to.
This then confuses the objtool uaccess validation. Instead of
returning directly from the .fixup, jump back into the right function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
By writing the function in asm we avoid cross object code flow and
objtool no longer gets confused about a 'stray' CLAC.
Also; the asm version is actually _simpler_.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The increment of buff is indented one level too deeply, clean
this up by removing a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20190314230838.18256-1-colin.king@canonical.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Various cleanups and simplifications, none of them really stands out,
they are all over the place"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/uaccess: Remove unused __addr_ok() macro
x86/smpboot: Remove unused phys_id variable
x86/mm/dump_pagetables: Remove the unused prev_pud variable
x86/fpu: Move init_xstate_size() to __init section
x86/cpu_entry_area: Move percpu_setup_debug_store() to __init section
x86/mtrr: Remove unused variable
x86/boot/compressed/64: Explain paging_prepare()'s return value
x86/resctrl: Remove duplicate MSR_MISC_FEATURE_CONTROL definition
x86/asm/suspend: Drop ENTRY from local data
x86/hw_breakpoints, kprobes: Remove kprobes ifdeffery
x86/boot: Save several bytes in decompressor
x86/trap: Remove useless declaration
x86/mm/tlb: Remove unused cpu variable
x86/events: Mark expected switch-case fall-throughs
x86/asm-prototypes: Remove duplicate include <asm/page.h>
x86/kernel: Mark expected switch-case fall-throughs
x86/insn-eval: Mark expected switch-case fall-through
x86/platform/UV: Replace kmalloc() and memset() with k[cz]alloc() calls
x86/e820: Replace kmalloc() + memcpy() with kmemdup()
|
|
The descriptions of userspace memory access functions had minor issues
with formatting that made kernel-doc unable to properly detect the
function/macro names and the return value sections:
./arch/x86/include/asm/uaccess.h:80: info: Scanning doc for
./arch/x86/include/asm/uaccess.h:139: info: Scanning doc for
./arch/x86/include/asm/uaccess.h:231: info: Scanning doc for
./arch/x86/include/asm/uaccess.h:505: info: Scanning doc for
./arch/x86/include/asm/uaccess.h:530: info: Scanning doc for
./arch/x86/lib/usercopy_32.c:58: info: Scanning doc for
./arch/x86/lib/usercopy_32.c:69: warning: No description found for return
value of 'clear_user'
./arch/x86/lib/usercopy_32.c:78: info: Scanning doc for
./arch/x86/lib/usercopy_32.c:90: warning: No description found for return
value of '__clear_user'
Fix the formatting.
Link: http://lkml.kernel.org/r/1549549644-4903-3-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit 170d13ca3a2f ("x86: re-introduce non-generic memcpy_{to,from}io")
I made our copy from IO space use a separate copy routine rather than
rely on the generic memcpy. I did that because our generic memory copy
isn't actually well-defined when it comes to internal access ordering or
alignment, and will in fact depend on various CPUID flags.
In particular, the default memcpy() for a modern Intel CPU will
generally be just a "rep movsb", which works reasonably well for
medium-sized memory copies of regular RAM, since the CPU will turn it
into fairly optimized microcode.
However, for non-cached memory and IO, "rep movs" ends up being
horrendously slow and will just do the architectural "one byte at a
time" accesses implied by the movsb.
At the other end of the spectrum, if you _don't_ end up using the "rep
movsb" code, you'd likely fall back to the software copy, which does
overlapping accesses for the tail, and may copy things backwards.
Again, for regular memory that's fine, for IO memory not so much.
The thinking was that clearly nobody really cared (because things
worked), but some people had seen horrible performance due to the byte
accesses, so let's just revert back to our long ago version that dod
"rep movsl" for the bulk of the copy, and then fixed up the potentially
last few bytes of the tail with "movsw/b".
Interestingly (and perhaps not entirely surprisingly), while that was
our original memory copy implementation, and had been used before for
IO, in the meantime many new users of memcpy_*io() had come about. And
while the access patterns for the memory copy weren't well-defined (so
arguably _any_ access pattern should work), in practice the "rep movsb"
case had been very common for the last several years.
In particular Jarkko Sakkinen reported that the memcpy_*io() change
resuled in weird errors from his Geminilake NUC TPM module.
And it turns out that the TPM TCG accesses according to spec require
that the accesses be
(a) done strictly sequentially
(b) be naturally aligned
otherwise the TPM chip will abort the PCI transaction.
And, in fact, the tpm_crb.c driver did this:
memcpy_fromio(buf, priv->rsp, 6);
...
memcpy_fromio(&buf[6], &priv->rsp[6], expected - 6);
which really should never have worked in the first place, but back
before commit 170d13ca3a2f it *happened* to work, because the
memcpy_fromio() would be expanded to a regular memcpy, and
(a) gcc would expand the first memcpy in-line, and turn it into a
4-byte and a 2-byte read, and they happened to be in the right
order, and the alignment was right.
(b) gcc would call "memcpy()" for the second one, and the machines that
had this TPM chip also apparently ended up always having ERMS
("Enhanced REP MOVSB/STOSB instructions"), so we'd use the "rep
movbs" for that copy.
In other words, basically by pure luck, the code happened to use the
right access sizes in the (two different!) memcpy() implementations to
make it all work.
But after commit 170d13ca3a2f, both of the memcpy_fromio() calls
resulted in a call to the routine with the consistent memory accesses,
and in both cases it started out transferring with 4-byte accesses.
Which worked for the first copy, but resulted in the second copy doing a
32-bit read at an address that was only 2-byte aligned.
Jarkko is actually fixing the fragile code in the TPM driver, but since
this is an excellent example of why we absolutely must not use a generic
memcpy for IO accesses, _and_ an IO-specific one really should strive to
align the IO accesses, let's do exactly that.
Side note: Jarkko also noted that the driver had been used on ARM
platforms, and had worked. That was because on 32-bit ARM, memcpy_*io()
ends up always doing byte accesses, and on 64-bit ARM it first does byte
accesses to align to 8-byte boundaries, and then does 8-byte accesses
for the bulk.
So ARM actually worked by design, and the x86 case worked by pure luck.
We *might* want to make x86-64 do the 8-byte case too. That should be a
pretty straightforward extension, but let's do one thing at a time. And
generally MMIO accesses aren't really all that performance-critical, as
shown by the fact that for a long time we just did them a byte at a
time, and very few people ever noticed.
Reported-and-tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: David Laight <David.Laight@aculab.com>
Fixes: 170d13ca3a2f ("x86: re-introduce non-generic memcpy_{to,from}io")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Linus Torvalds
Masami Hiramatsu
Tony Luck
Jann Horn
Ingo Molnar
Adrian Hunter
Jiri Slaby
Janakarajan Natarajan
Valdis Klētnieks
Josh Poimboeuf
Nadav Amit
Thomas Gleixner
Gary Hook
Andi Kleen
Waiman Long
Peter Zijlstra
Colin Ian King
Mike Rapoport