| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 028c221ed1904af9ac3c5162ee98f48966de6b3d ]
AMD systems provide a "NodeId" value that represents a global ID
indicating to which "Node" a logical CPU belongs. The "Node" is a
physical structure equivalent to a Die, and it should not be confused
with logical structures like NUMA nodes. Logical nodes can be adjusted
based on firmware or other settings whereas the physical nodes/dies are
fixed based on hardware topology.
The NodeId value can be used when a physical ID is needed by software.
Save the AMD NodeId to struct cpuinfo_x86.cpu_die_id. Use the value
from CPUID or MSR as appropriate. Default to phys_proc_id otherwise.
Do so for both AMD and Hygon systems.
Drop the node_id parameter from cacheinfo_*_init_llc_id() as it is no
longer needed.
Update the x86 topology documentation.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201109210659.754018-2-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78ff2733ff352175eb7f4418a34654346e1b6cd2 ]
Fix to restore BTF if single-stepping causes a page fault and
it is cancelled.
Usually the BTF flag was restored when the single stepping is done
(in resume_execution()). However, if a page fault happens on the
single stepping instruction, the fault handler is invoked and
the single stepping is cancelled. Thus, the BTF flag is not
restored.
Fixes: 1ecc798c6764 ("x86: debugctlmsr kprobes")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/160389546985.106936.12727996109376240993.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26573a97746c7a99f394f9d398ce91a8853b3b89 ]
Currently, Linux as a hypervisor guest will enable x2apic only if there are
no CPUs present at boot time with an APIC ID above 255.
Hotplugging a CPU later with a higher APIC ID would result in a CPU which
cannot be targeted by external interrupts.
Add a filter in x2apic_apic_id_valid() which can be used to prevent such
CPUs from coming online, and allow x2apic to be enabled even if they are
present at boot time.
Fixes: ce69a784504 ("x86/apic: Enable x2APIC without interrupt remapping under KVM")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-2-dwmw2@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 06c5fe9b12dde1b62821f302f177c972bb1c81f9 upstream
The MBA software controller (mba_sc) is a feedback loop which
periodically reads MBM counters and tries to restrict the bandwidth
below a user-specified value. It tags along the MBM counter overflow
handler to do the updates with 1s interval in mbm_update() and
update_mba_bw().
The purpose of mbm_update() is to periodically read the MBM counters to
make sure that the hardware counter doesn't wrap around more than once
between user samplings. mbm_update() calls __mon_event_count() for local
bandwidth updating when mba_sc is not enabled, but calls mbm_bw_count()
instead when mba_sc is enabled. __mon_event_count() will not be called
for local bandwidth updating in MBM counter overflow handler, but it is
still called when reading MBM local bandwidth counter file
'mbm_local_bytes', the call path is as below:
rdtgroup_mondata_show()
mon_event_read()
mon_event_count()
__mon_event_count()
In __mon_event_count(), m->chunks is updated by delta chunks which is
calculated from previous MSR value (m->prev_msr) and current MSR value.
When mba_sc is enabled, m->chunks is also updated in mbm_update() by
mistake by the delta chunks which is calculated from m->prev_bw_msr
instead of m->prev_msr. But m->chunks is not used in update_mba_bw() in
the mba_sc feedback loop.
When reading MBM local bandwidth counter file, m->chunks was changed
unexpectedly by mbm_bw_count(). As a result, the incorrect local
bandwidth counter which calculated from incorrect m->chunks is shown to
the user.
Fix this by removing incorrect m->chunks updating in mbm_bw_count() in
MBM counter overflow handler, and always calling __mon_event_count() in
mbm_update() to make sure that the hardware local bandwidth counter
doesn't wrap around.
Test steps:
# Run workload with aggressive memory bandwidth (e.g., 10 GB/s)
git clone https://github.com/intel/intel-cmt-cat && cd intel-cmt-cat
&& make
./tools/membw/membw -c 0 -b 10000 --read
# Enable MBA software controller
mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl
# Create control group c1
mkdir /sys/fs/resctrl/c1
# Set MB throttle to 6 GB/s
echo "MB:0=6000;1=6000" > /sys/fs/resctrl/c1/schemata
# Write PID of the workload to tasks file
echo `pidof membw` > /sys/fs/resctrl/c1/tasks
# Read local bytes counters twice with 1s interval, the calculated
# local bandwidth is not as expected (approaching to 6 GB/s):
local_1=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes`
sleep 1
local_2=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes`
echo "local b/w (bytes/s):" `expr $local_2 - $local_1`
Before fix:
local b/w (bytes/s): 11076796416
After fix:
local b/w (bytes/s): 5465014272
Fixes: ba0f26d8529c (x86/intel_rdt/mba_sc: Prepare for feedback loop)
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/1607063279-19437-1-git-send-email-xiaochen.shen@intel.com
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit abe8f12b44250d02937665033a8b750c1bfeb26e upstream
Nothing reads struct mbm_states's chunks_bw value, its a copy of
chunks. Remove it.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-2-james.morse@arm.com
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 190113b4c6531c8e09b31d5235f9b5175cbb0f72 upstream.
Prarit reported that depending on the affinity setting the
' irq $N: Affinity broken due to vector space exhaustion.'
message is showing up in dmesg, but the vector space on the CPUs in the
affinity mask is definitely not exhausted.
Shung-Hsi provided traces and analysis which pinpoints the problem:
The ordering of trying to assign an interrupt vector in
assign_irq_vector_any_locked() is simply wrong if the interrupt data has a
valid node assigned. It does:
1) Try the intersection of affinity mask and node mask
2) Try the node mask
3) Try the full affinity mask
4) Try the full online mask
Obviously #2 and #3 are in the wrong order as the requested affinity
mask has to take precedence.
In the observed cases #1 failed because the affinity mask did not contain
CPUs from node 0. That made it allocate a vector from node 0, thereby
breaking affinity and emitting the misleading message.
Revert the order of #2 and #3 so the full affinity mask without the node
intersection is tried before actually affinity is broken.
If no node is assigned then only the full affinity mask and if that fails
the full online mask is tried.
Fixes: d6ffc6ac83b1 ("x86/vector: Respect affinity mask in irq descriptor")
Reported-by: Prarit Bhargava <prarit@redhat.com>
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87ft4djtyp.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4e9a5ae8df5b3365183150f6df49e49dece80d8c upstream.
Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be
insn.prefixes.bytes[i] != 0 and i < 4
instead of using insn.prefixes.nbytes.
Introduce a for_each_insn_prefix() macro for this purpose. Debugged by
Kees Cook <keescook@chromium.org>.
[ bp: Massage commit message, sync with the respective header in tools/
and drop "we". ]
Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 758999246965eeb8b253d47e72f7bfe508804b16 upstream.
On resource group creation via a mkdir an extra kernfs_node reference is
obtained by kernfs_get() to ensure that the rdtgroup structure remains
accessible for the rdtgroup_kn_unlock() calls where it is removed on
deletion. Currently the extra kernfs_node reference count is only
dropped by kernfs_put() in rdtgroup_kn_unlock() while the rdtgroup
structure is removed in a few other locations that lack the matching
reference drop.
In call paths of rmdir and umount, when a control group is removed,
kernfs_remove() is called to remove the whole kernfs nodes tree of the
control group (including the kernfs nodes trees of all child monitoring
groups), and then rdtgroup structure is freed by kfree(). The rdtgroup
structures of all child monitoring groups under the control group are
freed by kfree() in free_all_child_rdtgrp().
Before calling kfree() to free the rdtgroup structures, the kernfs node
of the control group itself as well as the kernfs nodes of all child
monitoring groups still take the extra references which will never be
dropped to 0 and the kernfs nodes will never be freed. It leads to
reference count leak and kernfs_node_cache memory leak.
For example, reference count leak is observed in these two cases:
(1) mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/c1
mkdir /sys/fs/resctrl/c1/mon_groups/m1
umount /sys/fs/resctrl
(2) mkdir /sys/fs/resctrl/c1
mkdir /sys/fs/resctrl/c1/mon_groups/m1
rmdir /sys/fs/resctrl/c1
The same reference count leak issue also exists in the error exit paths
of mkdir in mkdir_rdt_prepare() and rdtgroup_mkdir_ctrl_mon().
Fix this issue by following changes to make sure the extra kernfs_node
reference on rdtgroup is dropped before freeing the rdtgroup structure.
(1) Introduce rdtgroup removal helper rdtgroup_remove() to wrap up
kernfs_put() and kfree().
(2) Call rdtgroup_remove() in rdtgroup removal path where the rdtgroup
structure is about to be freed by kfree().
(3) Call rdtgroup_remove() or kernfs_put() as appropriate in the error
exit paths of mkdir where an extra reference is taken by kernfs_get().
Fixes: f3cbeacaa06e ("x86/intel_rdt/cqm: Add rmdir support")
Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files")
Fixes: 60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system")
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1604085088-31707-1-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fd8d9db3559a29fd737bcdb7c4fcbe1940caae34 upstream.
Willem reported growing of kernfs_node_cache entries in slabtop when
repeatedly creating and removing resctrl subdirectories as well as when
repeatedly mounting and unmounting the resctrl filesystem.
On resource group (control as well as monitoring) creation via a mkdir
an extra kernfs_node reference is obtained to ensure that the rdtgroup
structure remains accessible for the rdtgroup_kn_unlock() calls where it
is removed on deletion. The kernfs_node reference count is dropped by
kernfs_put() in rdtgroup_kn_unlock().
With the above explaining the need for one kernfs_get()/kernfs_put()
pair in resctrl there are more places where a kernfs_node reference is
obtained without a corresponding release. The excessive amount of
reference count on kernfs nodes will never be dropped to 0 and the
kernfs nodes will never be freed in the call paths of rmdir and umount.
It leads to reference count leak and kernfs_node_cache memory leak.
Remove the superfluous kernfs_get() calls and expand the existing
comments surrounding the remaining kernfs_get()/kernfs_put() pair that
remains in use.
Superfluous kernfs_get() calls are removed from two areas:
(1) In call paths of mount and mkdir, when kernfs nodes for "info",
"mon_groups" and "mon_data" directories and sub-directories are
created, the reference count of newly created kernfs node is set to 1.
But after kernfs_create_dir() returns, superfluous kernfs_get() are
called to take an additional reference.
(2) kernfs_get() calls in rmdir call paths.
Fixes: 17eafd076291 ("x86/intel_rdt: Split resource group removal in two")
Fixes: 4af4a88e0c92 ("x86/intel_rdt/cqm: Add mount,umount support")
Fixes: f3cbeacaa06e ("x86/intel_rdt/cqm: Add rmdir support")
Fixes: d89b7379015f ("x86/intel_rdt/cqm: Add mon_data")
Fixes: c7d9aac61311 ("x86/intel_rdt/cqm: Add mkdir support for RDT monitoring")
Fixes: 5dc1d5c6bac2 ("x86/intel_rdt: Simplify info and base file lists")
Fixes: 60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system")
Fixes: 4e978d06dedb ("x86/intel_rdt: Add "info" files to resctrl file system")
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1604085053-31639-1-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 33fc379df76b4991e5ae312f07bcd6820811971e upstream.
When spectre_v2_user={seccomp,prctl},ibpb is specified on the command
line, IBPB is force-enabled and STIPB is conditionally-enabled (or not
available).
However, since
21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.")
the spectre_v2_user_ibpb variable is set to SPECTRE_V2_USER_{PRCTL,SECCOMP}
instead of SPECTRE_V2_USER_STRICT, which is the actual behaviour.
Because the issuing of IBPB relies on the switch_mm_*_ibpb static
branches, the mitigations behave as expected.
Since
1978b3a53a74 ("x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP")
this discrepency caused the misreporting of IB speculation via prctl().
On CPUs with STIBP always-on and spectre_v2_user=seccomp,ibpb,
prctl(PR_GET_SPECULATION_CTRL) would return PR_SPEC_PRCTL |
PR_SPEC_ENABLE instead of PR_SPEC_DISABLE since both IBPB and STIPB are
always on. It also allowed prctl(PR_SET_SPECULATION_CTRL) to set the IB
speculation mode, even though the flag is ignored.
Similarly, for CPUs without SMT, prctl(PR_GET_SPECULATION_CTRL) should
also return PR_SPEC_DISABLE since IBPB is always on and STIBP is not
available.
[ bp: Massage commit message. ]
Fixes: 21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.")
Fixes: 1978b3a53a74 ("x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201110123349.1.Id0cbf996d2151f4c143c90f9028651a5b49a5908@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25bc65d8ddfc17cc1d7a45bd48e9bdc0e729ced3 upstream.
Currently, if mce_end() fails, no_way_out - the variable denoting
whether the machine can recover from this MCE - is determined by whether
the worst severity that was found across the MCA banks associated with
the current CPU, is of panic severity.
However, at this point no_way_out could have been already set by
mca_start() after looking at all severities of all CPUs that entered the
MCE handler. If mce_end() fails, check first if no_way_out is already
set and, if so, stick to it, otherwise use the local worst value.
[ bp: Massage. ]
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201127161819.3106432-2-gabriele.paoloni@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
loading
commit 1a371e67dc77125736cc56d3a0893f06b75855b6 upstream.
Currently, scan_microcode() leverages microcode_matches() to check
if the microcode matches the CPU by comparing the family and model.
However, the processor stepping and flags of the microcode signature
should also be considered when saving a microcode patch for early
update.
Use find_matching_signature() in scan_microcode() and get rid of the
now-unused microcode_matches() which is a good cleanup in itself.
Complete the verification of the patch being saved for early loading in
save_microcode_patch() directly. This needs to be done there too because
save_mc_for_early() will call save_microcode_patch() too.
The second reason why this needs to be done is because the loader still
tries to support, at least hypothetically, mixed-steppings systems and
thus adds all patches to the cache that belong to the same CPU model
albeit with different steppings.
For example:
microcode: CPU: sig=0x906ec, pf=0x2, rev=0xd6
microcode: mc_saved[0]: sig=0x906e9, pf=0x2a, rev=0xd6, total size=0x19400, date = 2020-04-23
microcode: mc_saved[1]: sig=0x906ea, pf=0x22, rev=0xd6, total size=0x19000, date = 2020-04-27
microcode: mc_saved[2]: sig=0x906eb, pf=0x2, rev=0xd6, total size=0x19400, date = 2020-04-23
microcode: mc_saved[3]: sig=0x906ec, pf=0x22, rev=0xd6, total size=0x19000, date = 2020-04-27
microcode: mc_saved[4]: sig=0x906ed, pf=0x22, rev=0xd6, total size=0x19400, date = 2020-04-23
The patch which is being saved for early loading, however, can only be
the one which fits the CPU this runs on so do the signature verification
before saving.
[ bp: Do signature verification in save_microcode_patch()
and rewrite commit message. ]
Fixes: ec400ddeff20 ("x86/microcode_intel_early.c: Early update ucode on Intel's CPU")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208535
Link: https://lkml.kernel.org/r/20201113015923.13960-1-yu.c.chen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4d213e76a359e540ca786ee937da7f35faa8e5f8 ]
"intel_iommu=off" command line is used to disable iommu but iommu is force
enabled in a tboot system for security reason.
However for better performance on high speed network device, a new option
"intel_iommu=tboot_noforce" is introduced to disable the force on.
By default kernel should panic if iommu init fail in tboot for security
reason, but it's unnecessory if we use "intel_iommu=tboot_noforce,off".
Fix the code setting force_on and move intel_iommu_tboot_noforce
from tboot code to intel iommu code.
Fixes: 7304e8f28bb2 ("iommu/vt-d: Correctly disable Intel IOMMU force on")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Tested-by: Lukasz Hawrylko <lukasz.hawrylko@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201110071908.3133-1-zhenzhong.duan@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
always-on STIBP
commit 1978b3a53a74e3230cd46932b149c6e62e832e9a upstream.
On AMD CPUs which have the feature X86_FEATURE_AMD_STIBP_ALWAYS_ON,
STIBP is set to on and
spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED
At the same time, IBPB can be set to conditional.
However, this leads to the case where it's impossible to turn on IBPB
for a process because in the PR_SPEC_DISABLE case in ib_prctl_set() the
spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED
condition leads to a return before the task flag is set. Similarly,
ib_prctl_get() will return PR_SPEC_DISABLE even though IBPB is set to
conditional.
More generally, the following cases are possible:
1. STIBP = conditional && IBPB = on for spectre_v2_user=seccomp,ibpb
2. STIBP = on && IBPB = conditional for AMD CPUs with
X86_FEATURE_AMD_STIBP_ALWAYS_ON
The first case functions correctly today, but only because
spectre_v2_user_ibpb isn't updated to reflect the IBPB mode.
At a high level, this change does one thing. If either STIBP or IBPB
is set to conditional, allow the prctl to change the task flag.
Also, reflect that capability when querying the state. This isn't
perfect since it doesn't take into account if only STIBP or IBPB is
unconditionally on. But it allows the conditional feature to work as
expected, without affecting the unconditional one.
[ bp: Massage commit message and comment; space out statements for
better readability. ]
Fixes: 21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20201105163246.v2.1.Ifd7243cd3e2c2206a893ad0a5b9a4f19549e22c6@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit afc18069a2cb7ead5f86623a5f3d4ad6e21f940d ]
kexec_file_load() currently reuses the old boot_params.screen_info,
but if drivers have change the hardware state, boot_param.screen_info
could contain invalid info.
For example, the video type might be no longer VGA, or the frame buffer
address might be changed. If the kexec kernel keeps using the old screen_info,
kexec'ed kernel may attempt to write to an invalid framebuffer
memory region.
There are two screen_info instances globally available, boot_params.screen_info
and screen_info. Later one is a copy, and is updated by drivers.
So let kexec_file_load use the updated copy.
[ mingo: Tidied up the changelog. ]
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20201014092429.1415040-2-kasong@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
compiled kernels
[ Upstream commit f2ac57a4c49d40409c21c82d23b5706df9b438af ]
GCC 10 optimizes the scheduler code differently than its predecessors.
When CONFIG_DEBUG_SECTION_MISMATCH=y, the Makefile forces GCC not
to inline some functions (-fno-inline-functions-called-once). Before GCC
10, "no-inlined" __schedule() starts with the usual prologue:
push %bp
mov %sp, %bp
So the ORC unwinder simply picks stack pointer from %bp and
unwinds from __schedule() just perfectly:
$ cat /proc/1/stack
[<0>] ep_poll+0x3e9/0x450
[<0>] do_epoll_wait+0xaa/0xc0
[<0>] __x64_sys_epoll_wait+0x1a/0x20
[<0>] do_syscall_64+0x33/0x40
[<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
But now, with GCC 10, there is no %bp prologue in __schedule():
$ cat /proc/1/stack
<nothing>
The ORC entry of the point in __schedule() is:
sp:sp+88 bp:last_sp-48 type:call end:0
In this case, nobody subtracts sizeof "struct inactive_task_frame" in
__unwind_start(). The struct is put on the stack by __switch_to_asm() and
only then __switch_to_asm() stores %sp to task->thread.sp. But we start
unwinding from a point in __schedule() (stored in frame->ret_addr by
'call') and not in __switch_to_asm().
So for these example values in __unwind_start():
sp=ffff94b50001fdc8 bp=ffff8e1f41d29340 ip=__schedule+0x1f0
The stack is:
ffff94b50001fdc8: ffff8e1f41578000 # struct inactive_task_frame
ffff94b50001fdd0: 0000000000000000
ffff94b50001fdd8: ffff8e1f41d29340
ffff94b50001fde0: ffff8e1f41611d40 # ...
ffff94b50001fde8: ffffffff93c41920 # bx
ffff94b50001fdf0: ffff8e1f41d29340 # bp
ffff94b50001fdf8: ffffffff9376cad0 # ret_addr (and end of the struct)
0xffffffff9376cad0 is __schedule+0x1f0 (after the call to
__switch_to_asm). Now follow those 88 bytes from the ORC entry (sp+88).
The entry is correct, __schedule() really pushes 48 bytes (8*7) + 32 bytes
via subq to store some local values (like 4U below). So to unwind, look
at the offset 88-sizeof(long) = 0x50 from here:
ffff94b50001fe00: ffff8e1f41578618
ffff94b50001fe08: 00000cc000000255
ffff94b50001fe10: 0000000500000004
ffff94b50001fe18: 7793fab6956b2d00 # NOTE (see below)
ffff94b50001fe20: ffff8e1f41578000
ffff94b50001fe28: ffff8e1f41578000
ffff94b50001fe30: ffff8e1f41578000
ffff94b50001fe38: ffff8e1f41578000
ffff94b50001fe40: ffff94b50001fed8
ffff94b50001fe48: ffff8e1f41577ff0
ffff94b50001fe50: ffffffff9376cf12
Here ^^^^^^^^^^^^^^^^ is the correct ret addr from
__schedule(). It translates to schedule+0x42 (insn after a call to
__schedule()).
BUT, unwind_next_frame() tries to take the address starting from
0xffff94b50001fdc8. That is exactly from thread.sp+88-sizeof(long) =
0xffff94b50001fdc8+88-8 = 0xffff94b50001fe18, which is garbage marked as
NOTE above. So this quits the unwinding as 7793fab6956b2d00 is obviously
not a kernel address.
There was a fix to skip 'struct inactive_task_frame' in
unwind_get_return_address_ptr in the following commit:
187b96db5ca7 ("x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks")
But we need to skip the struct already in the unwinder proper. So
subtract the size (increase the stack pointer) of the structure in
__unwind_start() directly. This allows for removal of the code added by
commit 187b96db5ca7 completely, as the address is now at
'(unsigned long *)state->sp - 1', the same as in the generic case.
[ mingo: Cleaned up the changelog a bit, for better readability. ]
Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder")
Bug: https://bugzilla.suse.com/show_bug.cgi?id=1176907
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20201014053051.24199-1-jslaby@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2def7d49d0812ea40a224161b2001b2e815dce2 ]
If an exception needs to be handled while reading an MSR - which is in
most of the cases caused by a #GP on a non-existent MSR - then this
is most likely the incarnation of a BIOS or a hardware bug. Such bug
violates the architectural guarantee that MCA banks are present with all
MSRs belonging to them.
The proper fix belongs in the hardware/firmware - not in the kernel.
Handling an #MC exception which is raised while an NMI is being handled
would cause the nasty NMI nesting issue because of the shortcoming of
IRET of reenabling NMIs when executed. And the machine is in an #MC
context already so <Deity> be at its side.
Tracing MSR accesses while in #MC is another no-no due to tracing being
inherently a bad idea in atomic context:
vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section
so remove all that "additional" functionality from mce_rdmsrl() and
provide it with a special exception handler which panics the machine
when that MSR is not accessible.
The exception handler prints a human-readable message explaining what
the panic reason is but, what is more, it panics while in the #GP
handler and latter won't have executed an IRET, thus opening the NMI
nesting issue in the case when the #MC has happened while handling
an NMI. (#MC itself won't be reenabled until MCG_STATUS hasn't been
cleared).
Suggested-by: Andy Lutomirski <luto@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
[ Add missing prototypes for ex_handler_* ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200906212130.GA28456@zn.tnic
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd258dc4442c5c1c069c6b5b42bfe7d10cddda95 ]
The patrol scrubber in Skylake and Cascade Lake systems can be configured
to report uncorrected errors using a special signature in the machine
check bank and to signal using CMCI instead of machine check.
Update the severity calculation mechanism to allow specifying the model,
minimum stepping and range of machine check bank numbers.
Add a new rule to detect the special signature (on model 0x55, stepping
>=4 in any of the memory controller banks).
[ bp: Rewrite it.
aegl: Productize it. ]
Suggested-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200930021313.31810-2-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa5cacdc29d76a005cbbee018a47faa6e724dd2d ]
The CRn accessor functions use __force_order as a dummy operand to
prevent the compiler from reordering CRn reads/writes with respect to
each other.
The fact that the asm is volatile should be enough to prevent this:
volatile asm statements should be executed in program order. However GCC
4.9.x and 5.x have a bug that might result in reordering. This was fixed
in 8.1, 7.3 and 6.5. Versions prior to these, including 5.x and 4.9.x,
may reorder volatile asm statements with respect to each other.
There are some issues with __force_order as implemented:
- It is used only as an input operand for the write functions, and hence
doesn't do anything additional to prevent reordering writes.
- It allows memory accesses to be cached/reordered across write
functions, but CRn writes affect the semantics of memory accesses, so
this could be dangerous.
- __force_order is not actually defined in the kernel proper, but the
LLVM toolchain can in some cases require a definition: LLVM (as well
as GCC 4.9) requires it for PIE code, which is why the compressed
kernel has a definition, but also the clang integrated assembler may
consider the address of __force_order to be significant, resulting in
a reference that requires a definition.
Fix this by:
- Using a memory clobber for the write functions to additionally prevent
caching/reordering memory accesses across CRn writes.
- Using a dummy input operand with an arbitrary constant address for the
read functions, instead of a global variable. This will prevent reads
from being reordered across writes, while allowing memory loads to be
cached/reordered across CRn reads, which should be safe.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82602
Link: https://lore.kernel.org/lkml/20200527135329.1172644-1-arnd@arndb.de/
Link: https://lkml.kernel.org/r/20200902232152.3709896-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f94c91f7ba3ba7de2bc8aa31be28e1abb22f849e ]
When nmi_check_duration() is checking the time an NMI handler took to
execute, the whole_msecs value used should be read from the @duration
argument, not from the ->max_duration, the latter being used to store
the current maximal duration.
[ bp: Rewrite commit message. ]
Fixes: 248ed51048c4 ("x86/nmi: Remove irq_work from the long duration NMI handler")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Libing Zhou <libing.zhou@nokia-sbell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Changbin Du <changbin.du@gmail.com>
Link: https://lkml.kernel.org/r/20200820025641.44075-1-libing.zhou@nokia-sbell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a4bb5e5507a585532cc413125b921c8546fc39f ]
Commit
0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
changed clearcpuid parsing from __setup() to cmdline_find_option().
While the __setup() function would have been called for each clearcpuid=
parameter on the command line, cmdline_find_option() will only return
the last one, so the change effectively made it impossible to disable
more than one bit.
Allow a comma-separated list of bit numbers as the argument for
clearcpuid to allow multiple bits to be disabled again. Log the bits
being disabled for informational purposes.
Also fix the check on the return value of cmdline_find_option(). It
returns -1 when the option is not found, so testing as a boolean is
incorrect.
Fixes: 0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907213919.2423441-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 86a82ae0b5095ea24c55898a3f025791e7958b21 upstream.
Several people reported in the kernel bugzilla that between v4.12 and v4.13
the magic which works around broken hardware and BIOSes to find the proper
timer interrupt delivery mode stopped working for some older affected
platforms which need to fall back to ExtINT delivery mode.
The reason is that the core code changed to keep track of the masked and
disabled state of an interrupt line more accurately to avoid the expensive
hardware operations.
That broke an assumption in i8259_make_irq() which invokes
disable_irq_nosync();
irq_set_chip_and_handler();
enable_irq();
Up to v4.12 this worked because enable_irq() unconditionally unmasked the
interrupt line, but after the state tracking improvements this is not
longer the case because the IO/APIC uses lazy disabling. So the line state
is unmasked which means that enable_irq() does not call into the new irq
chip to unmask it.
In principle this is a shortcoming of the core code, but it's more than
unclear whether the core code should try to reset state. At least this
cannot be done unconditionally as that would break other existing use cases
where the chip type is changed, e.g. when changing the trigger type, but
the callers expect the state to be preserved.
As the way how check_timer() is switching the delivery modes is truly
unique, the obvious fix is to simply unmask the i8259 manually after
changing the mode to ExtINT delivery and switching the irq chip to the
legacy PIC.
Note, that the fixes tag is not really precise, but identifies the commit
which broke the assumptions in the IO/APIC and i8259 code and that's the
kernel version to which this needs to be backported.
Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Reported-by: p_c_chan@hotmail.com
Reported-by: ecm4@mail.com
Reported-by: perdigao1@yahoo.com
Reported-by: matzes@users.sourceforge.net
Reported-by: rvelascog@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: p_c_chan@hotmail.com
Tested-by: matzes@users.sourceforge.net
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197769
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 16171bffc829272d5e6014bad48f680cb50943d9 ]
Alex Shi reported the pkey macros above arch_set_user_pkey_access()
to be unused. They are unused, and even refer to a nonexistent
CONFIG option.
But, they might have served a good use, which was to ensure that
the code does not try to set values that would not fit in the
PKRU register. As it stands, a too-large 'pkey' value would
be likely to silently overflow the u32 new_pkru_bits.
Add a check to look for overflows. Also add a comment to remind
any future developer to closely examine the types used to store
pkey values if arch_max_pkey() ever changes.
This boots and passes the x86 pkey selftests.
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200122165346.AD4DA150@viggo.jf.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f599d84231fd27e42f4ca2a786a6641e8cddf00 ]
On x86, purgatory() copies the first 640K of memory to a backup region
because the kernel needs those first 640K for the real mode trampoline
during boot, among others.
However, when SME is enabled, the kernel cannot properly copy the old
memory to the backup area but reads only its encrypted contents. The
result is that the crash tool gets invalid pointers when parsing vmcore:
crash> kmem -s|grep -i invalid
kmem: dma-kmalloc-512: slab:ffffd77680001c00 invalid freepointer:a6086ac099f0c5a4
kmem: dma-kmalloc-512: slab:ffffd77680001c00 invalid freepointer:a6086ac099f0c5a4
crash>
So reserve the remaining low 1M memory when the crashkernel option is
specified (after reserving real mode memory) so that allocated memory
does not fall into the low 1M area and thus the copying of the contents
of the first 640k to a backup region in purgatory() can be avoided
altogether.
This way, it does not need to be included in crash dumps or used for
anything except the trampolines that must live in the low 1M.
[ bp: Heavily rewrite commit message, flip check logic in
crash_reserve_low_1M().]
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: bhe@redhat.com
Cc: Dave Young <dyoung@redhat.com>
Cc: d.hatayama@fujitsu.com
Cc: dhowells@redhat.com
Cc: ebiederm@xmission.com
Cc: horms@verge.net.au
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jürgen Gross <jgross@suse.com>
Cc: kexec@lists.infradead.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: vgoyal@redhat.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191108090027.11082-2-lijiang@redhat.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204793
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 52d6b926aabc47643cd910c85edb262b7f44c168 upstream.
There is a race when taking a CPU offline. Current code looks like this:
native_cpu_disable()
{
...
apic_soft_disable();
/*
* Any existing set bits for pending interrupt to
* this CPU are preserved and will be sent via IPI
* to another CPU by fixup_irqs().
*/
cpu_disable_common();
{
....
/*
* Race window happens here. Once local APIC has been
* disabled any new interrupts from the device to
* the old CPU are lost
*/
fixup_irqs(); // Too late to capture anything in IRR.
...
}
}
The fix is to disable the APIC *after* cpu_disable_common().
Testing was done with a USB NIC that provided a source of frequent
interrupts. A script migrated interrupts to a specific CPU and
then took that CPU offline.
Fixes: 60dcaad5736f ("x86/hotplug: Silence APIC and NMI when CPU is dead")
Reported-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/875zdarr4h.fsf@nanos.tec.linutronix.de/
Link: https://lore.kernel.org/r/1598501530-45821-1-git-send-email-ashok.raj@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7d98585860d845e36ee612832a5ff021f201dbaf ]
Frequency descriptor of Lightning Mountain SoC doesn't have all the
frequency entries so resulting in the below failure causing a kernel hang:
Error MSR_FSB_FREQ index 15 is unknown
tsc: Fast TSC calibration failed
So, add all the frequency entries in the Lightning Mountain SoC frequency
descriptor.
Fixes: 0cc5359d8fd45 ("x86/cpu: Update init data for new Airmont CPU model")
Fixes: 812c2d7506fd ("x86/tsc_msr: Use named struct initializers")
Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/211c643ae217604b46cbec43a2c0423946dc7d2d.1596440057.git.eswara.kota@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream.
John reported that on a RK3288 system the perf per CPU interrupts are all
affine to CPU0 and provided the analysis:
"It looks like what happens is that because the interrupts are not per-CPU
in the hardware, armpmu_request_irq() calls irq_force_affinity() while
the interrupt is deactivated and then request_irq() with IRQF_PERCPU |
IRQF_NOBALANCING.
Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls
irq_setup_affinity() which returns early because IRQF_PERCPU and
IRQF_NOBALANCING are set, leaving the interrupt on its original CPU."
This was broken by the recent commit which blocked interrupt affinity
setting in hardware before activation of the interrupt. While this works in
general, it does not work for this particular case. As contrary to the
initial analysis not all interrupt chip drivers implement an activate
callback, the safe cure is to make the deferred interrupt affinity setting
at activation time opt-in.
Implement the necessary core logic and make the two irqchip implementations
for which this is required opt-in. In hindsight this would have been the
right thing to do, but ...
Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly")
Reported-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec0160891e387f4771f953b888b1fe951398e5d9 upstream.
Commit 711419e504eb ("irqdomain: Add the missing assignment of
domain->fwnode for named fwnode") unintentionally caused a dangling pointer
page fault issue on firmware nodes that were freed after IRQ domain
allocation. Commit e3beca48a45b fixed that dangling pointer issue by only
freeing the firmware node after an IRQ domain allocation failure. That fix
no longer frees the firmware node immediately, but leaves the firmware node
allocated after the domain is removed.
The firmware node must be kept around through irq_domain_remove, but should be
freed it afterwards.
Add the missing free operations after domain removal where where appropriate.
Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8ab49526b53d3172d1d8dd03a75c7d1f5bd21239 ]
syzbot found its way in 86_fsgsbase_read_task() and triggered this oops:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 6866 Comm: syz-executor262 Not tainted 5.8.0-syzkaller #0
RIP: 0010:x86_fsgsbase_read_task+0x16d/0x310 arch/x86/kernel/process_64.c:393
Call Trace:
putreg32+0x3ab/0x530 arch/x86/kernel/ptrace.c:876
genregs32_set arch/x86/kernel/ptrace.c:1026 [inline]
genregs32_set+0xa4/0x100 arch/x86/kernel/ptrace.c:1006
copy_regset_from_user include/linux/regset.h:326 [inline]
ia32_arch_ptrace arch/x86/kernel/ptrace.c:1061 [inline]
compat_arch_ptrace+0x36c/0xd90 arch/x86/kernel/ptrace.c:1198
__do_compat_sys_ptrace kernel/ptrace.c:1420 [inline]
__se_compat_sys_ptrace kernel/ptrace.c:1389 [inline]
__ia32_compat_sys_ptrace+0x220/0x2f0 kernel/ptrace.c:1389
do_syscall_32_irqs_on arch/x86/entry/common.c:84 [inline]
__do_fast_syscall_32+0x57/0x80 arch/x86/entry/common.c:126
do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:149
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
This can happen if ptrace() or sigreturn() pokes an LDT selector into FS
or GS for a task with no LDT and something tries to read the base before
a return to usermode notices the bad selector and fixes it.
The fix is to make sure ldt pointer is not NULL.
Fixes: 07e1d88adaae ("x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately")
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d7f7d1d5e01c22894dee7c9c9266500478dca99 ]
The original code is a nop as i_mce.status is or'ed with part of itself,
fix it.
Fixes: a1300e505297 ("x86/ras/mce_amd_inj: Trigger deferred and thresholding errors interrupts")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20200611023238.3830-1-zhenzhong.duan@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit bdd65589593edd79b6a12ce86b3b7a7c6dae5208 upstream.
0day reported a possible circular locking dependency:
Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&port_lock_key);
lock(console_owner);
lock(&port_lock_key);
lock(&irq_desc_lock_class);
The reason for this is a printk() in the i8259 interrupt chip driver
which is invoked with the irq descriptor lock held, which reverses the
lock operations vs. printk() from arbitrary contexts.
Switch the printk() to printk_deferred() to avoid that.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87365abt2v.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 039a7a30ec102ec866d382a66f87f6f7654f8140 ]
If a user task's stack is empty, or if it only has user regs, ORC
reports it as a reliable empty stack. But arch_stack_walk_reliable()
incorrectly treats it as unreliable.
That happens because the only success path for user tasks is inside the
loop, which only iterates on non-empty stacks. Generally, a user task
must end in a user regs frame, but an empty stack is an exception to
that rule.
Thanks to commit 71c95825289f ("x86/unwind/orc: Fix error handling in
__unwind_start()"), unwind_start() now sets state->error appropriately.
So now for both ORC and FP unwinders, unwind_done() and !unwind_error()
always means the end of the stack was successfully reached. So the
success path for kthreads is no longer needed -- it can also be used for
empty user tasks.
Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lkml.kernel.org/r/f136a4e5f019219cbc4f4da33b30c2f44fa65b84.1594994374.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 372a8eaa05998cd45b3417d0e0ffd3a70978211a ]
The ORC unwinder fails to unwind newly forked tasks which haven't yet
run on the CPU. It correctly reads the 'ret_from_fork' instruction
pointer from the stack, but it incorrectly interprets that value as a
call stack address rather than a "signal" one, so the address gets
incorrectly decremented in the call to orc_find(), resulting in bad ORC
data.
Fix it by forcing 'ret_from_fork' frames to be signal frames.
Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lkml.kernel.org/r/f91a8778dde8aae7f71884b5df2b16d552040441.1594994374.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit de2b41be8fcccb2f5b6c480d35df590476344201 upstream.
On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is
page-aligned, but the end of the .bss..page_aligned section is not
guaranteed to be page-aligned.
As a result, objects from other .bss sections may end up on the same 4k
page as the idt_table, and will accidentially get mapped read-only during
boot, causing unexpected page-faults when the kernel writes to them.
This could be worked around by making the objects in the page aligned
sections page sized, but that's wrong.
Explicit sections which store only page aligned objects have an implicit
guarantee that the object is alone in the page in which it is placed. That
works for all objects except the last one. That's inconsistent.
Enforcing page sized objects for these sections would wreckage memory
sanitizers, because the object becomes artificially larger than it should
be and out of bound access becomes legit.
Align the end of the .bss..page_aligned and .data..page_aligned section on
page-size so all objects places in these sections are guaranteed to have
their own page.
[ tglx: Amended changelog ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e3beca48a45b5e0e6e6a4e0124276b8248dcc9bb ]
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.
Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.
Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit baedb87d1b53532f81b4bd0387f83b05d4f7eb9a upstream.
Setting interrupt affinity on inactive interrupts is inconsistent when
hierarchical irq domains are enabled. The core code should just store the
affinity and not call into the irq chip driver for inactive interrupts
because the chip drivers may not be in a state to handle such requests.
X86 has a hacky workaround for that but all other irq chips have not which
causes problems e.g. on GIC V3 ITS.
Instead of adding more ugly hacks all over the place, solve the problem in
the core code. If the affinity is set on an inactive interrupt then:
- Store it in the irq descriptors affinity mask
- Update the effective affinity to reflect that so user space has
a consistent view
- Don't call into the irq chip driver
This is the core equivalent of the X86 workaround and works correctly
because the affinity setting is established in the irq chip when the
interrupt is activated later on.
Note, that this is only effective when hierarchical irq domains are enabled
by the architecture. Doing it unconditionally would break legacy irq chip
implementations.
For hierarchial irq domains this works correctly as none of the drivers can
have a dependency on affinity setting in inactive state by design.
Remove the X86 workaround as it is not longer required.
Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts")
Reported-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com
Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5714ee50bb4375bd586858ad800b1d9772847452 upstream.
This fixes a regression encountered while running the
gdb.base/corefile.exp test in GDB's test suite.
In my testing, the typo prevented the sw_reserved field of struct
fxregs_state from being output to the kernel XSAVES area. Thus the
correct mask corresponding to XCR0 was not present in the core file for
GDB to interrogate, resulting in the following behavior:
[kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core
Reading symbols from testsuite/outputs/gdb.base/corefile/corefile...
[New LWP 232880]
warning: Unexpected size of section `.reg-xstate/232880' in core file.
With the typo fixed, the test works again as expected.
Signed-off-by: Kevin Buettner <kevinb@redhat.com>
Fixes: 9e4636545933 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7ad816762f9bf89e940e618ea40c43138b479e10 ]
Previously, kernel floating point code would run with the MXCSR control
register value last set by userland code by the thread that was active
on the CPU core just before kernel call. This could affect calculation
results if rounding mode was changed, or a crash if a FPU/SIMD exception
was unmasked.
Restore MXCSR to the kernel's default value.
[ bp: Carve out from a bigger patch by Petteri, add feature check, add
FNINIT call too (amluto). ]
Signed-off-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207979
Link: https://lkml.kernel.org/r/20200624114646.28953-2-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2c18bd525c47f882f033b0a813ecd09c93e1ecdf upstream.
Memory bandwidth is calculated reading the monitoring counter
at two intervals and calculating the delta. It is the software’s
responsibility to read the count often enough to avoid having
the count roll over _twice_ between reads.
The current code hardcodes the bandwidth monitoring counter's width
to 24 bits for AMD. This is due to default base counter width which
is 24. Currently, AMD does not implement the CPUID 0xF.[ECX=1]:EAX
to adjust the counter width. But, the AMD hardware supports much
wider bandwidth counter with the default width of 44 bits.
Kernel reads these monitoring counters every 1 second and adjusts the
counter value for overflow. With 24 bits and scale value of 64 for AMD,
it can only measure up to 1GB/s without overflowing. For the rates
above 1GB/s this will fail to measure the bandwidth.
Fix the issue setting the default width to 44 bits by adjusting the
offset.
AMD future products will implement CPUID 0xF.[ECX=1]:EAX.
[ bp: Let the line stick out and drop {}-brackets around a single
statement. ]
Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/159129975546.62538.5656031125604254041.stgit@naples-babu.amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a13b9d0b97211579ea63b96c606de79b963c0f47 upstream.
The X86_CR4_FSGSBASE bit of CR4 should not change after boot[1]. Older
kernels should enforce this bit to zero, and newer kernels need to
enforce it depending on boot-time configuration (e.g. "nofsgsbase").
To support a pinned bit being either 1 or 0, use an explicit mask in
combination with the expected pinned bit values.
[1] https://lore.kernel.org/lkml/20200527103147.GI325280@hirez.programming.kicks-ass.net
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/202006082013.71E29A42@keescook
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf09fb6cba4f7099620cc9ed32d94c27c4af992e upstream.
Remove support for context switching between the guest's and host's
desired UMWAIT_CONTROL. Propagating the guest's value to hardware isn't
required for correct functionality, e.g. KVM intercepts reads and writes
to the MSR, and the latency effects of the settings controlled by the
MSR are not architecturally visible.
As a general rule, KVM should not allow the guest to control power
management settings unless explicitly enabled by userspace, e.g. see
KVM_CAP_X86_DISABLE_EXITS. E.g. Intel's SDM explicitly states that C0.2
can improve the performance of SMT siblings. A devious guest could
disable C0.2 so as to improve the performance of their workloads at the
detriment to workloads running in the host or on other VMs.
Wholesale removal of UMWAIT_CONTROL context switching also fixes a race
condition where updates from the host may cause KVM to enter the guest
with the incorrect value. Because updates are are propagated to all
CPUs via IPI (SMP function callback), the value in hardware may be
stale with respect to the cached value and KVM could enter the guest
with the wrong value in hardware. As above, the guest can't observe the
bad value, but it's a weird and confusing wart in the implementation.
Removal also fixes the unnecessary usage of VMX's atomic load/store MSR
lists. Using the lists is only necessary for MSRs that are required for
correct functionality immediately upon VM-Enter/VM-Exit, e.g. EFER on
old hardware, or for MSRs that need to-the-uop precision, e.g. perf
related MSRs. For UMWAIT_CONTROL, the effects are only visible in the
kernel via TPAUSE/delay(), and KVM doesn't do any form of delay in
vcpu_vmx_run(). Using the atomic lists is undesirable as they are more
expensive than direct RDMSR/WRMSR.
Furthermore, even if giving the guest control of the MSR is legitimate,
e.g. in pass-through scenarios, it's not clear that the benefits would
outweigh the overhead. E.g. saving and restoring an MSR across a VMX
roundtrip costs ~250 cycles, and if the guest diverged from the host
that cost would be paid on every run of the guest. In other words, if
there is a legitimate use case then it should be enabled by a new
per-VM capability.
Note, KVM still needs to emulate MSR_IA32_UMWAIT_CONTROL so that it can
correctly expose other WAITPKG features to the guest, e.g. TPAUSE,
UMWAIT and UMONITOR.
Fixes: 6e3ba4abcea56 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623005135.10414-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cc5277fe66cf3ad68f41f1c539b2ef0d5e432974 ]
The callers don't expect *d_cdp to be set to an error pointer, they only
check for NULL. This leads to a static checker warning:
arch/x86/kernel/cpu/resctrl/rdtgroup.c:2648 __init_one_rdt_domain()
warn: 'd_cdp' could be an error pointer
This would not trigger a bug in this specific case because
__init_one_rdt_domain() calls it with a valid domain that would not have
a negative id and thus not trigger the return of the ERR_PTR(). If this
was a negative domain id then the call to rdt_find_domain() in
domain_add_cpu() would have returned the ERR_PTR() much earlier and the
creation of the domain with an invalid id would have been prevented.
Even though a bug is not triggered currently the right and safe thing to
do is to set the pointer to NULL because that is what can be checked for
when the caller is handling the CDP and non-CDP cases.
Fixes: 52eb74339a62 ("x86/resctrl: Fix rdt_find_domain() return value and checks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lkml.kernel.org/r/20200602193611.GA190851@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9b38cc704e844e41d9cf74e647bff1d249512cb3 upstream.
Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave.
My test was also able to trigger lockdep output:
============================================
WARNING: possible recursive locking detected
5.6.0-rc6+ #6 Not tainted
--------------------------------------------
sched-messaging/2767 is trying to acquire lock:
ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0
but task is already holding lock:
ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(kretprobe_table_locks[i].lock));
lock(&(kretprobe_table_locks[i].lock));
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by sched-messaging/2767:
#0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50
stack backtrace:
CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6
Call Trace:
dump_stack+0x96/0xe0
__lock_acquire.cold.57+0x173/0x2b7
? native_queued_spin_lock_slowpath+0x42b/0x9e0
? lockdep_hardirqs_on+0x590/0x590
? __lock_acquire+0xf63/0x4030
lock_acquire+0x15a/0x3d0
? kretprobe_hash_lock+0x52/0xa0
_raw_spin_lock_irqsave+0x36/0x70
? kretprobe_hash_lock+0x52/0xa0
kretprobe_hash_lock+0x52/0xa0
trampoline_handler+0xf8/0x940
? kprobe_fault_handler+0x380/0x380
? find_held_lock+0x3a/0x1c0
kretprobe_trampoline+0x25/0x50
? lock_acquired+0x392/0xbc0
? _raw_spin_lock_irqsave+0x50/0x70
? __get_valid_kprobe+0x1f0/0x1f0
? _raw_spin_unlock_irqrestore+0x3b/0x40
? finish_task_switch+0x4b9/0x6d0
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
The code within the kretprobe handler checks for probe reentrancy,
so we won't trigger any _raw_spin_lock_irqsave probe in there.
The problem is in outside kprobe_flush_task, where we call:
kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave
where _raw_spin_lock_irqsave triggers the kretprobe and installs
kretprobe_trampoline handler on _raw_spin_lock_irqsave return.
The kretprobe_trampoline handler is then executed with already
locked kretprobe_table_locks, and first thing it does is to
lock kretprobe_table_locks ;-) the whole lockup path like:
kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed
---> kretprobe_table_locks locked
kretprobe_trampoline
trampoline_handler
kretprobe_hash_lock(current, &head, &flags); <--- deadlock
Adding kprobe_busy_begin/end helpers that mark code with fake
probe installed to prevent triggering of another kprobe within
this code.
Using these helpers in kprobe_flush_task, so the probe recursion
protection check is hit and the probe is never set to prevent
above lockup.
Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2
Fixes: ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Reported-by: "Ziqian SUN (Zamir)" <zsun@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1f1fbc70c10e81f70e9fbe2102d439c883269811 ]
With commit dc20b2d52653 ("x86/idt: Move interrupt gate initialization to
IDT code") non assigned system vectors are also marked as used in
'used_vectors' (now 'system_vectors') bitmap. This makes checks in
arch_show_interrupts() whether a particular system vector is allocated to
always pass and e.g. 'Hyper-V reenlightenment interrupts' entry always
shows up in /proc/interrupts.
Another side effect of having all unassigned system vectors marked as used
is that irq_matrix_debug_show() will wrongly count them among 'System'
vectors.
As it is now ensured that alloc_intr_gate() is not called after init, it is
possible to leave unused entries in 'system_vectors' unset to fix these
issues.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200428093824.1451532-4-vkuznets@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de308d1815c9e8fe602a958c5c76142ff6501d75 ]
The commit
c84cb3735fd5 ("x86/apic: Move TSC deadline timer debug printk")
removed the message which said that the deadline timer was enabled.
It added a pr_debug() message which is issued when deadline timer
validation succeeds.
Well, issued only when CONFIG_DYNAMIC_DEBUG is enabled - otherwise
pr_debug() calls get optimized away if DEBUG is not defined in the
compilation unit.
Therefore, make the above message pr_info() so that it is visible in
dmesg.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200525104218.27018-1-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4e91825d7e1252f7cba005f1451e5464b23c15d ]
Add PCI IDs for AMD Renoir (4000-series Ryzen CPUs). This is necessary
to enable support for temperature sensors via the k10temp module.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Yazen Ghannam <yazen.ghannam@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20200510204842.2603-2-amonakov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3f79ae45904ae987a7c06a9e8d6084d7b73e67f ]
Add the new PCI Device 18h IDs for AMD Family 19h systems. Note that
Family 19h systems will not have a new PCI root device ID.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110015651.14887-4-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0348801151b5aefbcf9d6e9b9e30aceb3a2a7b13 ]
vmap does not take a gfp_t, the flags argument is for VM_* flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-3-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 17fae1294ad9d711b2c3dd0edef479d40c76a5e8 upstream.
An interesting thing happened when a guest Linux instance took a machine
check. The VMM unmapped the bad page from guest physical space and
passed the machine check to the guest.
Linux took all the normal actions to offline the page from the process
that was using it. But then guest Linux crashed because it said there
was a second machine check inside the kernel with this stack trace:
do_memory_failure
set_mce_nospec
set_memory_uc
_set_memory_uc
change_page_attr_set_clr
cpa_flush
clflush_cache_range_opt
This was odd, because a CLFLUSH instruction shouldn't raise a machine
check (it isn't consuming the data). Further investigation showed that
the VMM had passed in another machine check because is appeared that the
guest was accessing the bad page.
Fix is to check the scope of the poison by checking the MCi_MISC register.
If the entire page is affected, then unmap the page. If only part of the
page is affected, then mark the page as uncacheable.
This assumes that VMMs will do the logical thing and pass in the "whole
page scope" via the MCi_MISC register (since they unmapped the entire
page).
[ bp: Adjust to x86/entry changes. ]
Fixes: 284ce4011ba6 ("x86/memory_failure: Introduce {set, clear}_mce_nospec()")
Reported-by: Jue Wang <juew@google.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jue Wang <juew@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200520163546.GA7977@agluck-desk2.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 140fd4ac78d385e6c8e6a5757585f6c707085f87 upstream.
On MacBook6,1 reboot would hang unless parameter reboot=pci is added.
Make it automatic.
Signed-off-by: Hill Ma <maahiuzeon@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200425200641.GA1554@cslab.localdomain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Yazen Ghannam
Masami Hiramatsu
David Woodhouse
Xiaochen Shen
James Morse
Thomas Gleixner
Anand K Mistry
Gabriele Paoloni
Chen Yu
Zhenzhong Duan
Kairui Song
Jiri Slaby
Borislav Petkov
Arvind Sankar
Libing Zhou
Dave Hansen
Lianbo Jiang
Ashok Raj
Dilip Kota
Jon Derrick
Eric Dumazet
Josh Poimboeuf
Joerg Roedel
Kevin Buettner
Petteri Aimonen
Babu Moger
Kees Cook
Sean Christopherson
Dan Carpenter
Jiri Olsa
Vitaly Kuznetsov
Alexander Monakov
Christoph Hellwig
Tony Luck
Hill Ma