summaryrefslogtreecommitdiffstats
path: root/arch/s390
AgeCommit message (Collapse)Author
2020-12-30s390/kexec_file: fix diag308 subcode when loading crash kernelPhilipp Rudo
commit 613775d62ec60202f98d2c5f520e6e9ba6dd4ac4 upstream. diag308 subcode 0 performes a clear reset which inlcudes the reset of all registers in the system. While this is the preferred behavior when loading a normal kernel via kexec it prevents the crash kernel to store the register values in the dump. To prevent this use subcode 1 when loading a crash kernel instead. Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader") Cc: <stable@vger.kernel.org> # 4.17 Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Reported-by: Xiaoying Yan <yiyan@redhat.com> Tested-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30s390/smp: perform initial CPU reset also for SMT siblingsSven Schnelle
commit b5e438ebd7e808d1d2435159ac4742e01a94b8da upstream. Not resetting the SMT siblings might leave them in unpredictable state. One of the observed problems was that the CPU timer wasn't reset and therefore large system time values where accounted during CPU bringup. Cc: <stable@kernel.org> # 4.0 Fixes: 10ad34bc76dfb ("s390: add SMT support") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24s390/cpum_sf.c: fix file permission for cpum_sfb_sizeThomas Richter
commit 78d732e1f326f74f240d416af9484928303d9951 upstream. This file is installed by the s390 CPU Measurement sampling facility device driver to export supported minimum and maximum sample buffer sizes. This file is read by lscpumf tool to display the details of the device driver capabilities. The lscpumf tool might be invoked by a non-root user. In this case it does not print anything because the file contents can not be read. Fix this by allowing read access for all users. Reading the file contents is ok, changing the file contents is left to the root user only. For further reference and details see: [1] https://github.com/ibm-s390-tools/s390-tools/issues/97 Fixes: 69f239ed335a ("s390/cpum_sf: Dynamically extend the sampling buffer if overflows occur") Cc: <stable@vger.kernel.org> # 3.14 Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18s390/smp: move rcu_cpu_starting() earlierQian Cai
[ Upstream commit de5d9dae150ca1c1b5c7676711a9ca139d1a8dec ] The call to rcu_cpu_starting() in smp_init_secondary() is not early enough in the CPU-hotplug onlining process, which results in lockdep splats as follows: WARNING: suspicious RCU usage ----------------------------- kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. Call Trace: show_stack+0x158/0x1f0 dump_stack+0x1f2/0x238 __lock_acquire+0x2640/0x4dd0 lock_acquire+0x3a8/0xd08 _raw_spin_lock_irqsave+0xc0/0xf0 clockevents_register_device+0xa8/0x528 init_cpu_timer+0x33e/0x468 smp_init_secondary+0x11a/0x328 smp_start_secondary+0x82/0x88 This is avoided by moving the call to rcu_cpu_starting up near the beginning of the smp_init_secondary() function. Note that the raw_smp_processor_id() is required in order to avoid calling into lockdep before RCU has declared the CPU to be watched for readers. Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/ Signed-off-by: Qian Cai <cai@redhat.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05s390/stp: add locking to sysfs functionsSven Schnelle
commit b3bd02495cb339124f13135d51940cf48d83e5cb upstream. The sysfs function might race with stp_work_fn. To prevent that, add the required locking. Another issue is that the sysfs functions are checking the stp_online flag, but this flag just holds the user setting whether STP is enabled. Add a flag to clock_sync_flag whether stp_info holds valid data and use that instead. Cc: stable@vger.kernel.org Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01s390/init: add missing __init annotationsIlya Leoshkevich
[ Upstream commit fcb2b70cdb194157678fb1a75f9ff499aeba3d2a ] Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem. Sometimes these functions are not inlined, and then the build complains about section mismatch. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01s390/cpum_sf: Use kzalloc and minor changesThomas Richter
[ Upstream commit 32dab6828c42f087439d3e2617dc7283546bd8f7 ] Use kzalloc() to allocate auxiliary buffer structure initialized with all zeroes to avoid random value in trace output. Avoid double access to SBD hardware flags. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09s390: don't trace preemption in percpu macrosSven Schnelle
[ Upstream commit 1196f12a2c960951d02262af25af0bb1775ebcc2 ] Since commit a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables") the lockdep code itself uses percpu variables. This leads to recursions because the percpu macros are calling preempt_enable() which might call trace_preempt_on(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26s390/ptrace: fix storage key handlingHeiko Carstens
[ Upstream commit fd78c59446b8d050ecf3e0897c5a486c7de7c595 ] The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Since existing user space does not necessarily query and set the access key correctly, just ignore the user space provided key and use the correct one. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: 262832bc5acd ("s390/ptrace: add runtime instrumention register get/set") Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26s390/runtime_instrumentation: fix storage key handlingHeiko Carstens
[ Upstream commit 9eaba29c7985236e16468f4e6a49cc18cf01443e ] The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: e4b8b3f33fca ("s390: add support for runtime instrumentation") Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16s390/mm: fix huge pte soft dirty copyingJanosch Frank
commit 528a9539348a0234375dfaa1ca5dbbb2f8f8e8d2 upstream. If the pmd is soft dirty we must mark the pte as soft dirty (and not dirty). This fixes some cases for guest migration with huge page backings. Cc: <stable@vger.kernel.org> # 4.8 Fixes: bc29b7ac1d9f ("s390/mm: clean up pte/pmd encoding") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16s390/kasan: fix early pgm check handler executionVasily Gorbik
[ Upstream commit 998f5bbe3dbdab81c1cfb1aef7c3892f5d24f6c7 ] Currently if early_pgm_check_handler is called it ends up in pgm check loop. The problem is that early_pgm_check_handler is instrumented by KASAN but executed without DAT flag enabled which leads to addressing exception when KASAN checks try to access shadow memory. Fix that by executing early handlers with DAT flag on under KASAN as expected. Reported-and-tested-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16KVM: s390: reduce number of IO pins to 1Christian Borntraeger
[ Upstream commit 774911290c589e98e3638e73b24b0a4d4530e97c ] The current number of KVM_IRQCHIP_NUM_PINS results in an order 3 allocation (32kb) for each guest start/restart. This can result in OOM killer activity even with free swap when the memory is fragmented enough: kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0 kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu kernel: Hardware name: IBM 8562 T02 Z06 (LPAR) kernel: Call Trace: kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0) kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0 kernel: [<00000001f8687032>] dump_header+0x62/0x258 kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180 kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580 kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90 kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320 kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0 kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0 kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0 kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0 kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760 kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690 kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0 kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40 kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8 As far as I can tell s390x does not use the iopins as we bail our for anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to reduce the memory footprint. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-09s390/debug: avoid kernel warning on too large number of pagesChristian Borntraeger
[ Upstream commit 827c4913923e0b441ba07ba4cc41e01181102303 ] When specifying insanely large debug buffers a kernel warning is printed. The debug code does handle the error gracefully, though. Instead of duplicating the check let us silence the warning to avoid crashes when panic_on_warn is used. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30s390/vdso: fix vDSO clock_getres()Vincenzo Frascino
[ Upstream commit 478237a595120a18e9b52fd2c57a6e8b7a01e411 ] clock_getres in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; and hrtimer_resolution depends on the enablement of the high resolution timers that can happen either at compile or at run time. Fix the s390 vdso implementation of clock_getres keeping a copy of hrtimer_resolution in vdso data and using that directly. Link: https://lkml.kernel.org/r/20200324121027.21665-1-vincenzo.frascino@arm.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [heiko.carstens@de.ibm.com: use llgf for proper zero extension] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30s390/ptrace: fix setting syscall numberSven Schnelle
[ Upstream commit 873e5a763d604c32988c4a78913a8dab3862d2f9 ] When strace wants to update the syscall number, it sets GPR2 to the desired number and updates the GPR via PTRACE_SETREGSET. It doesn't update regs->int_code which would cause the old syscall executed on syscall restart. As we cannot change the ptrace ABI and don't have a field for the interruption code, check whether the tracee is in a syscall and the last instruction was svc. In that case assume that the tracer wants to update the syscall number and copy the GPR2 value to regs->int_code. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-25s390: fix syscall_get_error for compat processesDmitry V. Levin
commit b3583fca5fb654af2cfc1c08259abb9728272538 upstream. If both the tracer and the tracee are compat processes, and gprs[2] is assigned a value by __poke_user_compat, then the higher 32 bits of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and syscall_get_error() always returns 0. Fix the implementation by sign-extending the value for compat processes the same way as x86 implementation does. The bug was exposed to user space by commit 201766a20e30f ("ptrace: add PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite. This change fixes strace syscall tampering on s390. Link: https://lkml.kernel.org/r/20200602180051.GA2427@altlinux.org Fixes: 753c4dd6a2fa2 ("[S390] ptrace changes") Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: stable@vger.kernel.org # v2.6.28+ Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-07s390/mm: fix set_huge_pte_at() for empty ptesGerald Schaefer
[ Upstream commit ac8372f3b4e41015549b331a4f350224661e7fc6 ] On s390, the layout of normal and large ptes (i.e. pmds/puds) differs. Therefore, set_huge_pte_at() does a conversion from a normal pte to the corresponding large pmd/pud. So, when converting an empty pte, this should result in an empty pmd/pud, which would return true for pmd/pud_none(). However, after conversion we also mark the pmd/pud as large, and therefore present. For empty ptes, this will result in an empty pmd/pud that is also marked as large, and pmd/pud_none() would not return true. There is currently no issue with this behaviour, as set_huge_pte_at() does not seem to be called for empty ptes. It would be valid though, so let's fix this by not marking empty ptes as large in set_huge_pte_at(). This was found by testing a patch from from Anshuman Khandual, which is currently discussed on LKML ("mm/debug: Add more arch page table helper tests"). Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-07s390/ftrace: save traced function callerVasily Gorbik
[ Upstream commit b4adfe55915d8363e244e42386d69567db1719b9 ] A typical backtrace acquired from ftraced function currently looks like the following (e.g. for "path_openat"): arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15a/0x3b8 ftrace_graph_caller+0x0/0x1c 0x3e0007e3c98 <- ftraced function caller (should be do_filp_open+0x7c/0xe8) do_open_execat+0x70/0x1b8 __do_execve_file.isra.0+0x7d8/0x860 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8 Note random "0x3e0007e3c98" stack value as ftraced function caller. This value causes either imprecise unwinder result or unwinding failure. That "0x3e0007e3c98" comes from r14 of ftraced function stack frame, which it haven't had a chance to initialize since the very first instruction calls ftrace code ("ftrace_caller"). (ftraced function might never save r14 as well). Nevertheless according to s390 ABI any function is called with stack frame allocated for it and r14 contains return address. "ftrace_caller" itself is called with "brasl %r0,ftrace_caller". So, to fix this issue simply always save traced function caller onto ftraced function stack frame. Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-10s390/ftrace: fix potential crashes when switching tracersPhilipp Rudo
[ Upstream commit 8ebf6da9db1b2a20bb86cc1bee2552e894d03308 ] Switching tracers include instruction patching. To prevent that a instruction is patched while it's read the instruction patching is done in stop_machine 'context'. This also means that any function called during stop_machine must not be traced. Thus add 'notrace' to all functions called within stop_machine. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine") Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield") Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29s390/mm: fix page table upgrade vs 2ndary address mode accessesChristian Borntraeger
commit 316ec154810960052d4586b634156c54d0778f74 upstream. A page table upgrade in a kernel section that uses secondary address mode will mess up the kernel instructions as follows: Consider the following scenario: two threads are sharing memory. On CPU1 thread 1 does e.g. strnlen_user(). That gets to old_fs = enable_sacf_uaccess(); len = strnlen_user_srst(src, size); and " la %2,0(%1)\n" " la %3,0(%0,%1)\n" " slgr %0,%0\n" " sacf 256\n" "0: srst %3,%2\n" in strnlen_user_srst(). At that point we are in secondary space mode, control register 1 points to kernel page table and instruction fetching happens via c1, rather than usual c13. Interrupts are not disabled, for obvious reasons. On CPU2 thread 2 does MAP_FIXED mmap(), forcing the upgrade of page table from 3-level to e.g. 4-level one. We'd allocated new top-level table, set it up and now we hit this: notify = 1; spin_unlock_bh(&mm->page_table_lock); } if (notify) on_each_cpu(__crst_table_upgrade, mm, 0); OK, we need to actually change over to use of new page table and we need that to happen in all threads that are currently running. Which happens to include the thread 1. IPI is delivered and we have static void __crst_table_upgrade(void *arg) { struct mm_struct *mm = arg; if (current->active_mm == mm) set_user_asce(mm); __tlb_flush_local(); } run on CPU1. That does static inline void set_user_asce(struct mm_struct *mm) { S390_lowcore.user_asce = mm->context.asce; OK, user page table address updated... __ctl_load(S390_lowcore.user_asce, 1, 1); ... and control register 1 set to it. clear_cpu_flag(CIF_ASCE_PRIMARY); } IPI is run in home space mode, so it's fine - insns are fetched using c13, which always points to kernel page table. But as soon as we return from the interrupt, previous PSW is restored, putting CPU1 back into secondary space mode, at which point we no longer get the kernel instructions from the kernel mapping. The fix is to only fixup the control registers that are currently in use for user processes during the page table update. We must also disable interrupts in enable_sacf_uaccess to synchronize the cr and thread.mm_segment updates against the on_each-cpu. Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode") Cc: stable@vger.kernel.org # 4.15+ Reported-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> References: CVE-2020-11884 Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29KVM: s390: Return last valid slot if approx index is out-of-boundsSean Christopherson
commit 97daa028f3f621adff2c4f7b15fe0874e5b5bd6c upstream. Return the index of the last valid slot from gfn_to_memslot_approx() if its binary search loop yielded an out-of-bounds index. The index can be out-of-bounds if the specified gfn is less than the base of the lowest memslot (which is also the last valid memslot). Note, the sole caller, kvm_s390_get_cmma(), ensures used_slots is non-zero. Fixes: afdad61615cc3 ("KVM: s390: Fix storage attributes migration with memory slots") Cc: stable@vger.kernel.org # 4.19.x: 0774a964ef56: KVM: Fix out of range accesses to memslots Cc: stable@vger.kernel.org # 4.19.x Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200408064059.8957-3-sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23KVM: s390: vsie: Fix possible race when shadowing region 3 tablesDavid Hildenbrand
[ Upstream commit 1493e0f944f3c319d11e067c185c904d01c17ae5 ] We have to properly retry again by returning -EINVAL immediately in case somebody else instantiated the table concurrently. We missed to add the goto in this function only. The code now matches the other, similar shadowing functions. We are overwriting an existing region 2 table entry. All allocated pages are added to the crst_list to be freed later, so they are not lost forever. However, when unshadowing the region 2 table, we wouldn't trigger unshadowing of the original shadowed region 3 table that we replaced. It would get unshadowed when the original region 3 table is modified. As it's not connected to the page table hierarchy anymore, it's not going to get used anymore. However, for a limited time, this page table will stick around, so it's in some sense a temporary memory leak. Identified by manual code inspection. I don't think this classifies as stable material. Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing") Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23s390/cpum_sf: Fix wrong page count in error messageThomas Richter
[ Upstream commit 4141b6a5e9f171325effc36a22eb92bf961e7a5c ] When perf record -e SF_CYCLES_BASIC_DIAG runs with very high frequency, the samples arrive faster than the perf process can save them to file. Eventually, for longer running processes, this leads to the siutation where the trace buffers allocated by perf slowly fills up. At one point the auxiliary trace buffer is full and the CPU Measurement sampling facility is turned off. Furthermore a warning is printed to the kernel log buffer: cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling mode is full The number of allocated pages for the auxiliary trace buffer is shown as zero pages. That is wrong. Fix this by saving the number of allocated pages before entering the work loop in the interrupt handler. When the interrupt handler processes the samples, it may detect the buffer full condition and stop sampling, reducing the buffer size to zero. Print the correct value in the error message: cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling mode is full Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23s390/cpuinfo: fix wrong output when CPU0 is offlineAlexander Gordeev
[ Upstream commit 872f27103874a73783aeff2aac2b41a489f67d7c ] /proc/cpuinfo should not print information about CPU 0 when it is offline. Fixes: 281eaa8cb67c ("s390/cpuinfo: simplify locking and skip offline cpus early") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> [heiko.carstens@de.ibm.com: shortened commit message] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-17s390/diag: fix display of diagnose call statisticsMichael Mueller
commit 6c7c851f1b666a8a455678a0b480b9162de86052 upstream. Show the full diag statistic table and not just parts of it. The issue surfaced in a KVM guest with a number of vcpus defined smaller than NR_DIAG_STAT. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Cc: stable@vger.kernel.org Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17KVM: s390: vsie: Fix delivery of addressing exceptionsDavid Hildenbrand
commit 4d4cee96fb7a3cc53702a9be8299bf525be4ee98 upstream. Whenever we get an -EFAULT, we failed to read in guest 2 physical address space. Such addressing exceptions are reported via a program intercept to the nested hypervisor. We faked the intercept, we have to return to guest 2. Instead, right now we would be returning -EFAULT from the intercept handler, eventually crashing the VM. the correct thing to do is to return 1 as rc == 1 is the internal representation of "we have to go back into g2". Addressing exceptions can only happen if the g2->g3 page tables reference invalid g2 addresses (say, either a table or the final page is not accessible - so something that basically never happens in sane environments. Identified by manual code inspection. Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [borntraeger@de.ibm.com: fix patch description] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checksDavid Hildenbrand
commit a1d032a49522cb5368e5dfb945a85899b4c74f65 upstream. In case we have a region 1 the following calculation (31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11) results in 64. As shifts beyond the size are undefined the compiler is free to use instructions like sllg. sllg will only use 6 bits of the shift value (here 64) resulting in no shift at all. That means that ALL addresses will be rejected. The can result in endless loops, e.g. when prefix cannot get mapped. Fixes: 4be130a08420 ("s390/mm: add shadow gmap support") Tested-by: Janosch Frank <frankja@linux.ibm.com> Reported-by: Janosch Frank <frankja@linux.ibm.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-2-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [borntraeger@de.ibm.com: fix patch description, remove WARN_ON_ONCE] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11s390/qdio: fill SL with absolute addressesJulian Wiedmann
[ Upstream commit e9091ffd6a0aaced111b5d6ead5eaab5cd7101bc ] As the comment says, sl->sbal holds an absolute address. qeth currently solves this through wild casting, while zfcp doesn't care. Handle this properly in the code that actually builds the SL. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio] Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-11s390: make 'install' not depend on vmlinuxMasahiro Yamada
[ Upstream commit 94e90f727f7424d827256023cace829cad6896f4 ] For the same reason as commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"), the install targets should never trigger the rebuild of the kernel. The variable, CONFIGURE, is not set by anyone. Remove it as well. Link: https://lkml.kernel.org/r/20200216144829.27023-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in ↵Nathan Chancellor
storage_key_init_range commit 380324734956c64cd060e1db4304f3117ac15809 upstream. Clang warns: In file included from ../arch/s390/purgatory/purgatory.c:10: In file included from ../include/linux/kexec.h:18: In file included from ../include/linux/crash_core.h:6: In file included from ../include/linux/elfcore.h:5: In file included from ../include/linux/user.h:1: In file included from ../arch/s390/include/asm/user.h:11: ../arch/s390/include/asm/page.h:45:6: warning: converting the result of '<<' to a boolean always evaluates to false [-Wtautological-constant-compare] if (PAGE_DEFAULT_KEY) ^ ../arch/s390/include/asm/page.h:23:44: note: expanded from macro 'PAGE_DEFAULT_KEY' #define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4) ^ 1 warning generated. Explicitly compare this against zero to silence the warning as it is intended to be used in a boolean context. Fixes: de3fa841e429 ("s390/mm: fix compile for PAGE_DEFAULT_KEY != 0") Link: https://github.com/ClangBuiltLinux/linux/issues/860 Link: https://lkml.kernel.org/r/20200214064207.10381-1-natechancellor@gmail.com Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-24s390/ftrace: generate traced function stack frameVasily Gorbik
[ Upstream commit 45f7a0da600d3c409b5ad8d5ddddacd98ddc8840 ] Currently backtrace from ftraced function does not contain ftraced function itself. e.g. for "path_openat": arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15e/0x3d8 ftrace_graph_caller+0x0/0x1c <-- ftrace code do_filp_open+0x7c/0xe8 <-- ftraced function caller do_open_execat+0x76/0x1b8 open_exec+0x52/0x78 load_elf_binary+0x180/0x1160 search_binary_handler+0x8e/0x288 load_script+0x2a8/0x2b8 search_binary_handler+0x8e/0x288 __do_execve_file.isra.39+0x6fa/0xb40 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8 Ftraced function is expected in the backtrace by ftrace kselftests, which are now failing. It would also be nice to have it for clarity reasons. "ftrace_caller" itself is called without stack frame allocated for it and does not store its caller (ftraced function). Instead it simply allocates a stack frame for "ftrace_trace_function" and sets backchain to point to ftraced function stack frame (which contains ftraced function caller in saved r14). To fix this issue make "ftrace_caller" allocate a stack frame for itself just to store ftraced function for the stack unwinder. As a result backtrace looks like the following: arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15e/0x3d8 ftrace_graph_caller+0x0/0x1c <-- ftrace code path_openat+0x6/0xd60 <-- ftraced function do_filp_open+0x7c/0xe8 <-- ftraced function caller do_open_execat+0x76/0x1b8 open_exec+0x52/0x78 load_elf_binary+0x180/0x1160 search_binary_handler+0x8e/0x288 load_script+0x2a8/0x2b8 search_binary_handler+0x8e/0x288 __do_execve_file.isra.39+0x6fa/0xb40 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8 Reported-by: Sven Schnelle <sven.schnelle@ibm.com> Tested-by: Sven Schnelle <sven.schnelle@ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24s390: adjust -mpacked-stack support check for clang 10Vasily Gorbik
[ Upstream commit 253b3c4b2920e07ce9e2b18800b9b65245e2fafa ] clang 10 introduces -mpacked-stack compiler option implementation. At the same time currently it does not support a combination of -mpacked-stack and -mbackchain. This leads to the following build error: clang: error: unsupported option '-mpacked-stack with -mbackchain' for target 's390x-ibm-linux' If/when clang adds support for a combination of -mpacked-stack and -mbackchain it would also require -msoft-float (like gcc does). According to Ulrich Weigand "stack slot assigned to the kernel backchain overlaps the stack slot assigned to the FPR varargs (both are required to be placed immediately after the saved r15 slot if present)." Extend -mpacked-stack compiler option support check to include all 3 options -mpacked-stack -mbackchain -msoft-float which must present to support -mpacked-stack with -mbackchain. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24KVM: s390: ENOTSUPP -> EOPNOTSUPP fixupsChristian Borntraeger
[ Upstream commit c611990844c28c61ca4b35ff69d3a2ae95ccd486 ] There is no ENOTSUPP for userspace. Reported-by: Julian Wiedmann <jwi@linux.ibm.com> Fixes: 519783935451 ("KVM: s390: introduce ais mode modify function") Fixes: 2c1a48f2e5ed ("KVM: S390: add new group for flic") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24s390/pci: Fix possible deadlock in recover_store()Niklas Schnelle
[ Upstream commit 576c75e36c689bec6a940e807bae27291ab0c0de ] With zpci_disable() working, lockdep detected a potential deadlock (lockdep output at the end). The deadlock is between recovering a PCI function via the /sys/bus/pci/devices/<dev>/recover attribute vs powering it off via /sys/bus/pci/slots/<slot>/power. The fix is analogous to the changes in commit 0ee223b2e1f6 ("scsi: core: Avoid that SCSI device removal through sysfs triggers a deadlock") that fixed a potential deadlock on removing a SCSI device via sysfs. [ 204.830107] ====================================================== [ 204.830109] WARNING: possible circular locking dependency detected [ 204.830111] 5.5.0-rc2-06072-gbc03ecc9a672 #6 Tainted: G W [ 204.830112] ------------------------------------------------------ [ 204.830113] bash/1034 is trying to acquire lock: [ 204.830115] 0000000192a1a610 (kn->count#200){++++}, at: kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830122] but task is already holding lock: [ 204.830123] 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48 [ 204.830128] which lock already depends on the new lock. [ 204.830129] the existing dependency chain (in reverse order) is: [ 204.830130] -> #1 (pci_rescan_remove_lock){+.+.}: [ 204.830134] validate_chain+0x93a/0xd08 [ 204.830136] __lock_acquire+0x4ae/0x9d0 [ 204.830137] lock_acquire+0x114/0x280 [ 204.830140] __mutex_lock+0xa2/0x960 [ 204.830142] mutex_lock_nested+0x32/0x40 [ 204.830145] recover_store+0x4c/0xa8 [ 204.830147] kernfs_fop_write+0xe6/0x218 [ 204.830151] vfs_write+0xb0/0x1b8 [ 204.830152] ksys_write+0x6c/0xf8 [ 204.830154] system_call+0xd8/0x2d8 [ 204.830155] -> #0 (kn->count#200){++++}: [ 204.830187] check_noncircular+0x1e6/0x240 [ 204.830189] check_prev_add+0xfc/0xdb0 [ 204.830190] validate_chain+0x93a/0xd08 [ 204.830192] __lock_acquire+0x4ae/0x9d0 [ 204.830193] lock_acquire+0x114/0x280 [ 204.830194] __kernfs_remove.part.0+0x2e4/0x360 [ 204.830196] kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830198] remove_files.isra.0+0x4c/0x98 [ 204.830199] sysfs_remove_group+0x66/0xc8 [ 204.830201] sysfs_remove_groups+0x46/0x68 [ 204.830204] device_remove_attrs+0x52/0x90 [ 204.830207] device_del+0x182/0x418 [ 204.830208] pci_remove_bus_device+0x8a/0x130 [ 204.830210] pci_stop_and_remove_bus_device_locked+0x3a/0x48 [ 204.830212] disable_slot+0x68/0x100 [ 204.830213] power_write_file+0x7c/0x130 [ 204.830215] kernfs_fop_write+0xe6/0x218 [ 204.830217] vfs_write+0xb0/0x1b8 [ 204.830218] ksys_write+0x6c/0xf8 [ 204.830220] system_call+0xd8/0x2d8 [ 204.830221] other info that might help us debug this: [ 204.830223] Possible unsafe locking scenario: [ 204.830224] CPU0 CPU1 [ 204.830225] ---- ---- [ 204.830226] lock(pci_rescan_remove_lock); [ 204.830227] lock(kn->count#200); [ 204.830229] lock(pci_rescan_remove_lock); [ 204.830231] lock(kn->count#200); [ 204.830233] *** DEADLOCK *** [ 204.830234] 4 locks held by bash/1034: [ 204.830235] #0: 00000001b6fbc498 (sb_writers#4){.+.+}, at: vfs_write+0x158/0x1b8 [ 204.830239] #1: 000000018c9f5090 (&of->mutex){+.+.}, at: kernfs_fop_write+0xaa/0x218 [ 204.830242] #2: 00000001f7da0810 (kn->count#235){.+.+}, at: kernfs_fop_write+0xb6/0x218 [ 204.830245] #3: 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48 [ 204.830248] stack backtrace: [ 204.830250] CPU: 2 PID: 1034 Comm: bash Tainted: G W 5.5.0-rc2-06072-gbc03ecc9a672 #6 [ 204.830252] Hardware name: IBM 8561 T01 703 (LPAR) [ 204.830253] Call Trace: [ 204.830257] [<00000000c05e10c0>] show_stack+0x88/0xf0 [ 204.830260] [<00000000c112dca4>] dump_stack+0xa4/0xe0 [ 204.830261] [<00000000c0694c06>] check_noncircular+0x1e6/0x240 [ 204.830263] [<00000000c0695bec>] check_prev_add+0xfc/0xdb0 [ 204.830264] [<00000000c06971da>] validate_chain+0x93a/0xd08 [ 204.830266] [<00000000c06994c6>] __lock_acquire+0x4ae/0x9d0 [ 204.830267] [<00000000c069867c>] lock_acquire+0x114/0x280 [ 204.830269] [<00000000c09ca15c>] __kernfs_remove.part.0+0x2e4/0x360 [ 204.830270] [<00000000c09cb5c4>] kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830272] [<00000000c09cee14>] remove_files.isra.0+0x4c/0x98 [ 204.830274] [<00000000c09cf2ae>] sysfs_remove_group+0x66/0xc8 [ 204.830276] [<00000000c09cf356>] sysfs_remove_groups+0x46/0x68 [ 204.830278] [<00000000c0e3dfe2>] device_remove_attrs+0x52/0x90 [ 204.830280] [<00000000c0e40382>] device_del+0x182/0x418 [ 204.830281] [<00000000c0dcfd7a>] pci_remove_bus_device+0x8a/0x130 [ 204.830283] [<00000000c0dcfe92>] pci_stop_and_remove_bus_device_locked+0x3a/0x48 [ 204.830285] [<00000000c0de7190>] disable_slot+0x68/0x100 [ 204.830286] [<00000000c0de6514>] power_write_file+0x7c/0x130 [ 204.830288] [<00000000c09cc846>] kernfs_fop_write+0xe6/0x218 [ 204.830290] [<00000000c08f3480>] vfs_write+0xb0/0x1b8 [ 204.830291] [<00000000c08f378c>] ksys_write+0x6c/0xf8 [ 204.830293] [<00000000c1154374>] system_call+0xd8/0x2d8 [ 204.830294] INFO: lockdep is turned off. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-19s390/time: Fix clk type in get_tod_clockNathan Chancellor
commit 0f8a206df7c920150d2aa45574fba0ab7ff6be4f upstream. Clang warns: In file included from ../arch/s390/boot/startup.c:3: In file included from ../include/linux/elf.h:5: In file included from ../arch/s390/include/asm/elf.h:132: In file included from ../include/linux/compat.h:10: In file included from ../include/linux/time.h:74: In file included from ../include/linux/time32.h:13: In file included from ../include/linux/timex.h:65: ../arch/s390/include/asm/timex.h:160:20: warning: passing 'unsigned char [16]' to parameter of type 'char *' converts between pointers to integer types with different sign [-Wpointer-sign] get_tod_clock_ext(clk); ^~~ ../arch/s390/include/asm/timex.h:149:44: note: passing argument to parameter 'clk' here static inline void get_tod_clock_ext(char *clk) ^ Change clk's type to just be char so that it matches what happens in get_tod_clock_ext. Fixes: 57b28f66316d ("[S390] s390_hypfs: Add new attributes") Link: https://github.com/ClangBuiltLinux/linux/issues/861 Link: http://lkml.kernel.org/r/20200208140858.47970-1-natechancellor@gmail.com Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11KVM: s390: do not clobber registers during guest reset/store statusChristian Borntraeger
commit 55680890ea78be0df5e1384989f1be835043c084 upstream. The initial CPU reset clobbers the userspace fpc and the store status ioctl clobbers the guest acrs + fpr. As these calls are only done via ioctl (and not via vcpu_run), no CPU context is loaded, so we can (and must) act directly on the sync regs, not on the thread context. Cc: stable@kernel.org Fixes: e1788bb995be ("KVM: s390: handle floating point registers in the run ioctl not in vcpu_put/load") Fixes: 31d8b8d41a7e ("KVM: s390: handle access registers in the run ioctl not in vcpu_put/load") Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20200131100205.74720-2-frankja@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11s390/mm: fix dynamic pagetable upgrade for hugetlbfsGerald Schaefer
commit 5f490a520bcb393389a4d44bec90afcb332eb112 upstream. Commit ee71d16d22bb ("s390/mm: make TASK_SIZE independent from the number of page table levels") changed the logic of TASK_SIZE and also removed the arch_mmap_check() implementation for s390. This combination has a subtle effect on how get_unmapped_area() for hugetlbfs pages works. It is now possible that a user process establishes a hugetlbfs mapping at an address above 4 TB, without triggering a dynamic pagetable upgrade from 3 to 4 levels. This is because hugetlbfs mappings will not use mm->get_unmapped_area, but rather file->f_op->get_unmapped_area, which currently is the generic implementation of hugetlb_get_unmapped_area() that does not know about s390 dynamic pagetable upgrades, but with the new definition of TASK_SIZE, it will now allow mappings above 4 TB. Subsequent access to such a mapped address above 4 TB will result in a page fault loop, because the CPU cannot translate such a large address with 3 pagetable levels. The fault handler will try to map in a hugepage at the address, but due to the folded pagetable logic it will end up with creating entries in the 3 level pagetable, possibly overwriting existing mappings, and then it all repeats when the access is retried. Apart from the page fault loop, this can have various nasty effects, e.g. kernel panic from one of the BUG_ON() checks in memory management code, or even data loss if an existing mapping gets overwritten. Fix this by implementing HAVE_ARCH_HUGETLB_UNMAPPED_AREA support for s390, providing an s390 version for hugetlb_get_unmapped_area() with pagetable upgrade support similar to arch_get_unmapped_area(), which will then be used instead of the generic version. Fixes: ee71d16d22bb ("s390/mm: make TASK_SIZE independent from the number of page table levels") Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29mm/memory_hotplug: shrink zones when offlining memoryDavid Hildenbrand
commit feee6b2989165631b17ac6d4ccdbf6759254e85a upstream. -- snip -- - Missing arm64 hot(un)plug support - Missing some vmem_altmap_offset() cleanups - Missing sub-section hotadd support - Missing unification of mm/hmm.c and kernel/memremap.c -- snip -- We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): BUG: unable to handle page fault for address: 000000000000353d #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:clear_zone_contiguous+0x5/0x10 Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __remove_pages+0x4b/0x640 arch_remove_memory+0x63/0x8d try_remove_memory+0xdb/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x70/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x227/0x3a0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x221/0x550 worker_thread+0x50/0x3b0 kthread+0x105/0x140 ret_from_fork+0x3a/0x50 Modules linked in: CR2: 000000000000353d Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29mm/memory_hotplug: allow arch_remove_memory() without CONFIG_MEMORY_HOTREMOVEDavid Hildenbrand
commit 80ec922dbd87fd38d15719c86a94457204648aeb upstream. -- snip -- Missing arm64 memory hot(un)plug support. -- snip -- We want to improve error handling while adding memory by allowing to use arch_remove_memory() and __remove_pages() even if CONFIG_MEMORY_HOTREMOVE is not set to e.g., implement something like: arch_add_memory() rc = do_something(); if (rc) { arch_remove_memory(); } We won't get rid of CONFIG_MEMORY_HOTREMOVE for now, as it will require quite some dependencies for memory offlining. Link: http://lkml.kernel.org/r/20190527111152.16324-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Rob Herring <robh@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Qian Cai <cai@lca.pw> Cc: Mathieu Malaterre <malat@debian.org> Cc: Baoquan He <bhe@redhat.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29s390x/mm: implement arch_remove_memory()David Hildenbrand
commit 18c86506c80f6b6b5e67d95bf0d6f7e665de5239 upstream. Will come in handy when wanting to handle errors after arch_add_memory(). Link: http://lkml.kernel.org/r/20190527111152.16324-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arun KS <arunks@codeaurora.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29mm/memory_hotplug: make __remove_pages() and arch_remove_memory() never failDavid Hildenbrand
commit ac5c94264580f498e484c854031d0226b3c1038f upstream. -- snip -- Minor conflict in arch/powerpc/mm/mem.c -- snip -- All callers of arch_remove_memory() ignore errors. And we should really try to remove any errors from the memory removal path. No more errors are reported from __remove_pages(). BUG() in s390x code in case arch_remove_memory() is triggered. We may implement that properly later. WARN in case powerpc code failed to remove the section mapping, which is better than ignoring the error completely right now. Link: http://lkml.kernel.org/r/20190409100148.24703-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Agner <stefan@agner.ch> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Herring <robh@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Qian Cai <cai@lca.pw> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mike Travis <mike.travis@hpe.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29mm, memory_hotplug: add nid parameter to arch_remove_memoryOscar Salvador
commit 2c2a5af6fed20cf74401c9d64319c76c5ff81309 upstream. -- snip -- Missing unification of mm/hmm.c and kernel/memremap.c -- snip -- Patch series "Do not touch pages in hot-remove path", v2. This patchset aims for two things: 1) A better definition about offline and hot-remove stage 2) Solving bugs where we can access non-initialized pages during hot-remove operations [2] [3]. This is achieved by moving all page/zone handling to the offline stage, so we do not need to access pages when hot-removing memory. [1] https://patchwork.kernel.org/cover/10691415/ [2] https://patchwork.kernel.org/patch/10547445/ [3] https://www.spinics.net/lists/linux-mm/msg161316.html This patch (of 5): This is a preparation for the following-up patches. The idea of passing the nid is that it will allow us to get rid of the zone parameter afterwards. Link: http://lkml.kernel.org/r/20181127162005.15833-2-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-27s390/kexec_file: Fix potential segment overlap in ELF loaderPhilipp Rudo
[ Upstream commit 6339a3889ad4d0dd930ed7a1e873fb81d3e690f7 ] When loading an ELF image via kexec_file the segment alignment is ignored in the calculation for the load address of the next segment. When there are multiple segments this can lead to segment overlap and thus load failure. Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Fixes: 8be018827154 ("s390/kexec_file: Add ELF loader") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12s390/purgatory: do not build purgatory with kcov, kasan and friendsChristian Borntraeger
[ Upstream commit c23587c92f6e3260fe3b82bb75b38aa2553b9468 ] the purgatory must not rely on functions from the "old" kernel, so we must disable kasan and friends. We also need to have a separate copy of string.c as the default does not build memcmp with KASAN. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-09s390/smp: fix physical to logical CPU map for SMTHeiko Carstens
[ Upstream commit 72a81ad9d6d62dcb79f7e8ad66ffd1c768b72026 ] If an SMT capable system is not IPL'ed from the first CPU the setup of the physical to logical CPU mapping is broken: the IPL core gets CPU number 0, but then the next core gets CPU number 1. Correct would be that all SMT threads of CPU 0 get the subsequent logical CPU numbers. This is important since a lot of code (like e.g. the CPU topology code) assumes that CPU maps are setup like this. If the mapping is broken the system will not IPL due to broken topology masks: [ 1.716341] BUG: arch topology broken [ 1.716342] the SMT domain not a subset of the MC domain [ 1.716343] BUG: arch topology broken [ 1.716344] the MC domain not a subset of the BOOK domain This scenario can usually not happen since LPARs are always IPL'ed from CPU 0 and also re-IPL is intiated from CPU 0. However older kernels did initiate re-IPL on an arbitrary CPU. If therefore a re-IPL from an old kernel into a new kernel is initiated this may lead to crash. Fix this by setting up the physical to logical CPU mapping correctly. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-09s390/cpum_sf: Avoid SBD overflow condition in irq handlerThomas Richter
[ Upstream commit 0539ad0b22877225095d8adef0c376f52cc23834 ] The s390 CPU Measurement sampling facility has an overflow condition which fires when all entries in a SBD are used. The measurement alert interrupt is triggered and reads out all samples in this SDB. It then tests the successor SDB, if this SBD is not full, the interrupt handler does not read any samples at all from this SDB The design waits for the hardware to fill this SBD and then trigger another meassurement alert interrupt. This scheme works nicely until an perf_event_overflow() function call discards the sample due to a too high sampling rate. The interrupt handler has logic to read out a partially filled SDB when the perf event overflow condition in linux common code is met. This causes the CPUM sampling measurement hardware and the PMU device driver to operate on the same SBD's trailer entry. This should not happen. This can be seen here using this trace: cpumsf_pmu_add: tear:0xb5286000 hw_perf_event_update: sdbt 0xb5286000 full 1 over 0 flush_all:0 hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0 above shows 1. interrupt hw_perf_event_update: sdbt 0xb5286008 full 1 over 0 flush_all:0 hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0 above shows 2. interrupt ... this goes on fine until... hw_perf_event_update: sdbt 0xb5286068 full 1 over 0 flush_all:0 perf_push_sample1: overflow one or more samples read from the IRQ handler are rejected by perf_event_overflow() and the IRQ handler advances to the next SDB and modifies the trailer entry of a partially filled SDB. hw_perf_event_update: sdbt 0xb5286070 full 0 over 0 flush_all:1 timestamp: 14:32:52.519953 Next time the IRQ handler is called for this SDB the trailer entry shows an overflow count of 19 missed entries. hw_perf_event_update: sdbt 0xb5286070 full 1 over 19 flush_all:1 timestamp: 14:32:52.970058 Remove access to a follow on SDB when event overflow happened. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-09s390/cpum_sf: Adjust sampling interval to avoid hitting sample limitsThomas Richter
[ Upstream commit 39d4a501a9ef55c57b51e3ef07fc2aeed7f30b3b ] Function perf_event_ever_overflow() and perf_event_account_interrupt() are called every time samples are processed by the interrupt handler. However function perf_event_account_interrupt() has checks to avoid being flooded with interrupts (more then 1000 samples are received per task_tick). Samples are then dropped and a PERF_RECORD_THROTTLED is added to the perf data. The perf subsystem limit calculation is: maximum sample frequency := 100000 --> 1 samples per 10 us task_tick = 10ms = 10000us --> 1000 samples per task_tick The work flow is measurement_alert() uses SDBT head and each SBDT points to 511 SDB pages, each with 126 sample entries. After processing 8 SBDs and for each valid sample calling: perf_event_overflow() perf_event_account_interrupts() there is a considerable amount of samples being dropped, especially when the sample frequency is very high and near the 100000 limit. To avoid the high amount of samples being dropped near the end of a task_tick time frame, increment the sampling interval in case of dropped events. The CPU Measurement sampling facility on the s390 supports only intervals, specifiing how many CPU cycles have to be executed before a sample is generated. Increase the interval when the samples being generated hit the task_tick limit. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04s390/cpum_sf: Check for SDBT and SDB consistencyThomas Richter
[ Upstream commit 247f265fa502e7b17a0cb0cc330e055a36aafce4 ] Each SBDT is located at a 4KB page and contains 512 entries. Each entry of a SDBT points to a SDB, a 4KB page containing sampled data. The last entry is a link to another SDBT page. When an event is created the function sequence executed is: __hw_perf_event_init() +--> allocate_buffers() +--> realloc_sampling_buffers() +---> alloc_sample_data_block() Both functions realloc_sampling_buffers() and alloc_sample_data_block() allocate pages and the allocation can fail. This is handled correctly and all allocated pages are freed and error -ENOMEM is returned to the top calling function. Finally the event is not created. Once the event has been created, the amount of initially allocated SDBT and SDB can be too low. This is detected during measurement interrupt handling, where the amount of lost samples is calculated. If the number of lost samples is too high considering sampling frequency and already allocated SBDs, the number of SDBs is enlarged during the next execution of cpumsf_pmu_enable(). If more SBDs need to be allocated, functions realloc_sampling_buffers() +---> alloc-sample_data_block() are called to allocate more pages. Page allocation may fail and the returned error is ignored. A SDBT and SDB setup already exists. However the modified SDBTs and SDBs might end up in a situation where the first entry of an SDBT does not point to an SDB, but another SDBT, basicly an SBDT without payload. This can not be handled by the interrupt handler, where an SDBT must have at least one entry pointing to an SBD. Add a check to avoid SDBTs with out payload (SDBs) when enlarging the buffer setup. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31s390/ftrace: fix endless recursion in function_graph tracerSven Schnelle
[ Upstream commit 6feeee8efc53035c3195b02068b58ae947538aa4 ] The following sequence triggers a kernel stack overflow on s390x: mount -t tracefs tracefs /sys/kernel/tracing cd /sys/kernel/tracing echo function_graph > current_tracer [crash] This is because preempt_count_{add,sub} are in the list of traced functions, which can be demonstrated by: echo preempt_count_add >set_ftrace_filter echo function_graph > current_tracer [crash] The stack overflow happens because get_tod_clock_monotonic() gets called by ftrace but itself calls preempt_{disable,enable}(), which leads to a endless recursion. Fix this by using preempt_{disable,enable}_notrace(). Fixes: 011620688a71 ("s390/time: ensure get_clock_monotonic() returns monotonic values") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-14 12:34:20 +0000