| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 9258227e9dd1da8feddb07ad9702845546a581c9 ]
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we look up dtl_idx in
the lppaca to determine the number of entries in the buffer. Since
lppaca is in big endian, we need to do an endian conversion before using
this in our calculation to determine the number of entries in the
buffer. Without this, we do not iterate over the existing entries in the
DTL buffer properly.
Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db787af1b8a6b4be428ee2ea7d409dafcaa4a43c ]
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we register the DTL
buffer for a cpu when the associated file under powerpc/dtl in debugfs
is opened. When doing so, we need to set the size of the buffer being
registered in the second u32 word of the buffer. This needs to be in big
endian, but we are not doing the conversion resulting in the below error
showing up in dmesg:
dtl_start: DTL registration for cpu 0 (hw 0) failed with -4
Fix this in the obvious manner.
Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 063b8b1251fd069f3740339fca56119d218f11ba ]
The updates to powerpc numa and memory hotplug code now use the
in-kernel LMB array instead of the device tree. This change allows the
pseries memory DLPAR code to only update the device tree once after
successfully handling a DLPAR request.
Prior to the in-kernel LMB array, the numa code looked up the affinity
for memory being added in the device tree, the code now looks this up
in the LMB array. This change means the memory hotplug code can just
update the affinity for an LMB in the LMB array instead of updating
the device tree.
This also provides a savings in kernel memory. When updating the
device tree old properties are never free'ed since there is no
usecount on properties. This behavior leads to a new copy of the
property being allocated every time a LMB is added or removed (i.e. a
request to add 100 LMBs creates 100 new copies of the property). With
this update only a single new property is created when a DLPAR request
completes successfully.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d6475051fb3d9339c5c760ed9883bc0a9048b21 ]
Commit e78a7614f3876 ("idle: Prevent late-arriving interrupts from
disrupting offline") changes arch_cpu_idle_dead to be called with
interrupts disabled, which triggers the WARN in pnv_smp_cpu_kill_self.
Fix this by fixing up irq_happened after hard disabling, rather than
requiring there are no pending interrupts, similarly to what was done
done until commit 2525db04d1cc5 ("powerpc/powernv: Simplify lazy IRQ
handling in CPU offline").
Fixes: e78a7614f3876 ("idle: Prevent late-arriving interrupts from disrupting offline")
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add unexpected_mask rather than checking for known bad values,
change the WARN_ON() to a WARN_ON_ONCE()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191022115814.22456-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5666848774ef43d3db5151ec518f1deb63515c20 ]
Let's perform all checking + offlining + removing under
device_hotplug_lock, so nobody can mess with these devices via sysfs
concurrently.
[david@redhat.com: take device_hotplug_lock outside of loop]
Link: http://lkml.kernel.org/r/20180927092554.13567-6-david@redhat.com
Link: http://lkml.kernel.org/r/20180925091457.28651-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c784be435d5dae28d3b03db31753dd7a18733f0c ]
The calls to arch_add_memory()/arch_remove_memory() are always made
with the read-side cpu_hotplug_lock acquired via memory_hotplug_begin().
On pSeries, arch_add_memory()/arch_remove_memory() eventually call
resize_hpt() which in turn calls stop_machine() which acquires the
read-side cpu_hotplug_lock again, thereby resulting in the recursive
acquisition of this lock.
In the absence of CONFIG_PROVE_LOCKING, we hadn't observed a system
lockup during a memory hotplug operation because cpus_read_lock() is a
per-cpu rwsem read, which, in the fast-path (in the absence of the
writer, which in our case is a CPU-hotplug operation) simply
increments the read_count on the semaphore. Thus a recursive read in
the fast-path doesn't cause any problems.
However, we can hit this problem in practice if there is a concurrent
CPU-Hotplug operation in progress which is waiting to acquire the
write-side of the lock. This will cause the second recursive read to
block until the writer finishes. While the writer is blocked since the
first read holds the lock. Thus both the reader as well as the writers
fail to make any progress thereby blocking both CPU-Hotplug as well as
Memory Hotplug operations.
Memory-Hotplug CPU-Hotplug
CPU 0 CPU 1
------ ------
1. down_read(cpu_hotplug_lock.rw_sem)
[memory_hotplug_begin]
2. down_write(cpu_hotplug_lock.rw_sem)
[cpu_up/cpu_down]
3. down_read(cpu_hotplug_lock.rw_sem)
[stop_machine()]
Lockdep complains as follows in these code-paths.
swapper/0/1 is trying to acquire lock:
(____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: stop_machine+0x2c/0x60
but task is already holding lock:
(____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(cpu_hotplug_lock.rw_sem);
lock(cpu_hotplug_lock.rw_sem);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by swapper/0/1:
#0: (____ptrval____) (&dev->mutex){....}, at: __driver_attach+0x12c/0x1b0
#1: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50
#2: (____ptrval____) (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x54/0x1a0
stack backtrace:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc5-58373-gbc99402235f3-dirty #166
Call Trace:
dump_stack+0xe8/0x164 (unreliable)
__lock_acquire+0x1110/0x1c70
lock_acquire+0x240/0x290
cpus_read_lock+0x64/0xf0
stop_machine+0x2c/0x60
pseries_lpar_resize_hpt+0x19c/0x2c0
resize_hpt_for_hotplug+0x70/0xd0
arch_add_memory+0x58/0xfc
devm_memremap_pages+0x5e8/0x8f0
pmem_attach_disk+0x764/0x830
nvdimm_bus_probe+0x118/0x240
really_probe+0x230/0x4b0
driver_probe_device+0x16c/0x1e0
__driver_attach+0x148/0x1b0
bus_for_each_dev+0x90/0x130
driver_attach+0x34/0x50
bus_add_driver+0x1a8/0x360
driver_register+0x108/0x170
__nd_driver_register+0xd0/0xf0
nd_pmem_driver_init+0x34/0x48
do_one_initcall+0x1e0/0x45c
kernel_init_freeable+0x540/0x64c
kernel_init+0x2c/0x160
ret_from_kernel_thread+0x5c/0x68
Fix this issue by
1) Requiring all the calls to pseries_lpar_resize_hpt() be made
with cpu_hotplug_lock held.
2) In pseries_lpar_resize_hpt() invoke stop_machine_cpuslocked()
as a consequence of 1)
3) To satisfy 1), in hpt_order_set(), call mmu_hash_ops.resize_hpt()
with cpu_hotplug_lock held.
Fixes: dbcf929c0062 ("powerpc/pseries: Add support for hash table resizing")
Cc: stable@vger.kernel.org # v4.11+
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1557906352-29048-1-git-send-email-ego@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 56090a3902c80c296e822d11acdb6a101b322c52 upstream.
pnv_tce() returns a pointer to a TCE entry and originally a TCE table
would be pre-allocated. For the default case of 2GB window the table
needs only a single level and that is fine. However if more levels are
requested, it is possible to get a race when 2 threads want a pointer
to a TCE entry from the same page of TCEs.
This adds cmpxchg to handle the race. Note that once TCE is non-zero,
it cannot become zero again.
Fixes: a68bd1267b72 ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand")
CC: stable@vger.kernel.org # v4.19+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-2-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7de4f7b64c23e503a8c42af98d56f2a7462bd6d upstream.
Currently the OPAL symbol map is globally readable, which seems bad as
it contains physical addresses.
Restrict it to root.
Fixes: c8742f85125d ("powerpc/powernv: Expose OPAL firmware symbol map")
Cc: stable@vger.kernel.org # v3.19+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190503075253.22798-1-ajd@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 92c94dfb69e350471473fd3075c74bc68150879e ]
prep_irq_for_idle() is intended to be called before entering
H_CEDE (and it is used by the pseries cpuidle driver). However the
default pseries idle routine does not call it, leading to mismanaged
lazy irq state when the cpuidle driver isn't in use. Manifestations of
this include:
* Dropped IPIs in the time immediately after a cpu comes
online (before it has installed the cpuidle handler), making the
online operation block indefinitely waiting for the new cpu to
respond.
* Hitting this WARN_ON in arch_local_irq_restore():
/*
* We should already be hard disabled here. We had bugs
* where that wasn't the case so let's dbl check it and
* warn if we are wrong. Only do that when IRQ tracing
* is enabled as mfmsr() can be costly.
*/
if (WARN_ON_ONCE(mfmsr() & MSR_EE))
__hard_irq_disable();
Call prep_irq_for_idle() from pseries_lpar_idle() and honor its
result.
Fixes: 363edbe2614a ("powerpc: Default arch idle could cede processor on pseries")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ccfb5bd71d3d1228090a8633800ae7cdf42a94ac ]
After a partition migration, pseries_devicetree_update() processes
changes to the device tree communicated from the platform to
Linux. This is a relatively heavyweight operation, with multiple
device tree searches, memory allocations, and conversations with
partition firmware.
There's a few levels of nested loops which are bounded only by
decisions made by the platform, outside of Linux's control, and indeed
we have seen RCU stalls on large systems while executing this call
graph. Use cond_resched() in these loops so that the cpu is yielded
when needed.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
window
[ Upstream commit c37c792dec0929dbb6360a609fb00fa20bb16fc2 ]
We allocate only the first level of multilevel TCE tables for KVM
already (alloc_userspace_copy==true), and the rest is allocated on demand.
This is not enabled though for bare metal.
This removes the KVM limitation (implicit, via the alloc_userspace_copy
parameter) and always allocates just the first level. The on-demand
allocation of missing levels is already implemented.
As from now on DMA map might happen with disabled interrupts, this
allocates TCEs with GFP_ATOMIC; otherwise lockdep reports errors 1].
In practice just a single page is allocated there so chances for failure
are quite low.
To save time when creating a new clean table, this skips non-allocated
indirect TCE entries in pnv_tce_free just like we already do in
the VFIO IOMMU TCE driver.
This changes the default level number from 1 to 2 to reduce the amount
of memory required for the default 32bit DMA window at the boot time.
The default window size is up to 2GB which requires 4MB of TCEs which is
unlikely to be used entirely or at all as most devices these days are
64bit capable so by switching to 2 levels by default we save 4032KB of
RAM per a device.
While at this, add __GFP_NOWARN to alloc_pages_node() as the userspace
can trigger this path via VFIO, see the failure and try creating a table
again with different parameters which might succeed.
[1]:
===
BUG: sleeping function called from invalid context at mm/page_alloc.c:4596
in_atomic(): 1, irqs_disabled(): 1, pid: 1038, name: scsi_eh_1
2 locks held by scsi_eh_1/1038:
#0: 000000005efd659a (&host->eh_mutex){+.+.}, at: ata_eh_acquire+0x34/0x80
#1: 0000000006cf56a6 (&(&host->lock)->rlock){....}, at: ata_exec_internal_sg+0xb0/0x5c0
irq event stamp: 500
hardirqs last enabled at (499): [<c000000000cb8a74>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (500): [<c000000000cb85c4>] _raw_spin_lock_irqsave+0x44/0x120
softirqs last enabled at (0): [<c000000000101120>] copy_process.isra.4.part.5+0x640/0x1a80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 73 PID: 1038 Comm: scsi_eh_1 Not tainted 5.2.0-rc6-le_nv2_aikATfstn1-p1 #634
Call Trace:
[c000003d064cef50] [c000000000c8e6c4] dump_stack+0xe8/0x164 (unreliable)
[c000003d064cefa0] [c00000000014ed78] ___might_sleep+0x2f8/0x310
[c000003d064cf020] [c0000000003ca084] __alloc_pages_nodemask+0x2a4/0x1560
[c000003d064cf220] [c0000000000c2530] pnv_alloc_tce_level.isra.0+0x90/0x130
[c000003d064cf290] [c0000000000c2888] pnv_tce+0x128/0x3b0
[c000003d064cf360] [c0000000000c2c00] pnv_tce_build+0xb0/0xf0
[c000003d064cf3c0] [c0000000000bbd9c] pnv_ioda2_tce_build+0x3c/0xb0
[c000003d064cf400] [c00000000004cfe0] ppc_iommu_map_sg+0x210/0x550
[c000003d064cf510] [c00000000004b7a4] dma_iommu_map_sg+0x74/0xb0
[c000003d064cf530] [c000000000863944] ata_qc_issue+0x134/0x470
[c000003d064cf5b0] [c000000000863ec4] ata_exec_internal_sg+0x244/0x5c0
[c000003d064cf700] [c0000000008642d0] ata_exec_internal+0x90/0xe0
[c000003d064cf780] [c0000000008650ac] ata_dev_read_id+0x2ec/0x640
[c000003d064cf8d0] [c000000000878e28] ata_eh_recover+0x948/0x16d0
[c000003d064cfa10] [c00000000087d760] sata_pmp_error_handler+0x480/0xbf0
[c000003d064cfbc0] [c000000000884624] ahci_error_handler+0x74/0xe0
[c000003d064cfbf0] [c000000000879fa8] ata_scsi_port_error_handler+0x2d8/0x7c0
[c000003d064cfca0] [c00000000087a544] ata_scsi_error+0xb4/0x100
[c000003d064cfd00] [c000000000802450] scsi_error_handler+0x120/0x510
[c000003d064cfdb0] [c000000000140c48] kthread+0x1b8/0x1c0
[c000003d064cfe20] [c00000000000bd8c] ret_from_kernel_thread+0x5c/0x70
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
irq event stamp: 2305
========================================================
hardirqs last enabled at (2305): [<c00000000000e4c8>] fast_exc_return_irq+0x28/0x34
hardirqs last disabled at (2303): [<c000000000cb9fd0>] __do_softirq+0x4a0/0x654
WARNING: possible irq lock inversion dependency detected
5.2.0-rc6-le_nv2_aikATfstn1-p1 #634 Tainted: G W
softirqs last enabled at (2304): [<c000000000cba054>] __do_softirq+0x524/0x654
softirqs last disabled at (2297): [<c00000000010f278>] irq_exit+0x128/0x180
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
0000000006cf56a6 (&(&host->lock)->rlock){-...}, at: ahci_single_level_irq_intr+0xac/0x120
but this lock took another, HARDIRQ-unsafe lock in the past:
(fs_reclaim){+.+.}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
local_irq_disable();
lock(&(&host->lock)->rlock);
lock(fs_reclaim);
<Interrupt>
lock(&(&host->lock)->rlock);
*** DEADLOCK ***
no locks held by swapper/0/0.
the shortest dependencies between 2nd lock and 1st lock:
-> (fs_reclaim){+.+.} ops: 167579 {
HARDIRQ-ON-W at:
lock_acquire+0xf8/0x2a0
fs_reclaim_acquire.part.23+0x44/0x60
kmem_cache_alloc_node_trace+0x80/0x590
alloc_desc+0x64/0x270
__irq_alloc_descs+0x2e4/0x3a0
irq_domain_alloc_descs+0xb0/0x150
irq_create_mapping+0x168/0x2c0
xics_smp_probe+0x2c/0x98
pnv_smp_probe+0x40/0x9c
smp_prepare_cpus+0x524/0x6c4
kernel_init_freeable+0x1b4/0x650
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x70
SOFTIRQ-ON-W at:
lock_acquire+0xf8/0x2a0
fs_reclaim_acquire.part.23+0x44/0x60
kmem_cache_alloc_node_trace+0x80/0x590
alloc_desc+0x64/0x270
__irq_alloc_descs+0x2e4/0x3a0
irq_domain_alloc_descs+0xb0/0x150
irq_create_mapping+0x168/0x2c0
xics_smp_probe+0x2c/0x98
pnv_smp_probe+0x40/0x9c
smp_prepare_cpus+0x524/0x6c4
kernel_init_freeable+0x1b4/0x650
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x70
INITIAL USE at:
lock_acquire+0xf8/0x2a0
fs_reclaim_acquire.part.23+0x44/0x60
kmem_cache_alloc_node_trace+0x80/0x590
alloc_desc+0x64/0x270
__irq_alloc_descs+0x2e4/0x3a0
irq_domain_alloc_descs+0xb0/0x150
irq_create_mapping+0x168/0x2c0
xics_smp_probe+0x2c/0x98
pnv_smp_probe+0x40/0x9c
smp_prepare_cpus+0x524/0x6c4
kernel_init_freeable+0x1b4/0x650
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x70
}
===
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-4-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 41ba17f20ea835c489e77bd54e2da73184e22060 upstream.
Commit <684d984038aa> ('powerpc/powernv: Add debugfs interface for
imc-mode and imc') added debugfs interface for the nest imc pmu
devices to support changing of different ucode modes. Primarily adding
this capability for debug. But when doing so, the code did not
consider the case of cpu-less nodes. So when reading the _cmd_ or
_mode_ file of a cpu-less node will create this crash.
Faulting instruction address: 0xc0000000000d0d58
Oops: Kernel access of bad area, sig: 11 [#1]
...
CPU: 67 PID: 5301 Comm: cat Not tainted 5.2.0-rc6-next-20190627+ #19
NIP: c0000000000d0d58 LR: c00000000049aa18 CTR:c0000000000d0d50
REGS: c00020194548f9e0 TRAP: 0300 Not tainted (5.2.0-rc6-next-20190627+)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:28022822 XER: 00000000
CFAR: c00000000049aa14 DAR: 000000000003fc08 DSISR:40000000 IRQMASK: 0
...
NIP imc_mem_get+0x8/0x20
LR simple_attr_read+0x118/0x170
Call Trace:
simple_attr_read+0x70/0x170 (unreliable)
debugfs_attr_read+0x6c/0xb0
__vfs_read+0x3c/0x70
vfs_read+0xbc/0x1a0
ksys_read+0x7c/0x140
system_call+0x5c/0x70
Patch fixes the issue with a more robust check for vbase to NULL.
Before patch, ls output for the debugfs imc directory
# ls /sys/kernel/debug/powerpc/imc/
imc_cmd_0 imc_cmd_251 imc_cmd_253 imc_cmd_255 imc_mode_0 imc_mode_251 imc_mode_253 imc_mode_255
imc_cmd_250 imc_cmd_252 imc_cmd_254 imc_cmd_8 imc_mode_250 imc_mode_252 imc_mode_254 imc_mode_8
After patch, ls output for the debugfs imc directory
# ls /sys/kernel/debug/powerpc/imc/
imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8
Actual bug here is that, we have two loops with potentially different
loop counts. That is, in imc_get_mem_addr_nest(), loop count is
obtained from the dt entries. But in case of export_imc_mode_and_cmd(),
loop was based on for_each_nid() count. Patch fixes the loop count in
latter based on the struct mem_info. Ideally it would be better to
have array size in struct imc_pmu.
Fixes: 684d984038aa ('powerpc/powernv: Add debugfs interface for imc-mode and imc')
Reported-by: Qian Cai <cai@lca.pw>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190827101635.6942-1-maddy@linux.vnet.ibm.com
Cc: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ccb4ac2bf8a35c694ead92f8ac5530a16e8f2c8 upstream.
There's a bug in skiboot that causes the OPAL_XIVE_ALLOCATE_IRQ call
to return the 32-bit value 0xffffffff when OPAL has run out of IRQs.
Unfortunatelty, OPAL return values are signed 64-bit entities and
errors are supposed to be negative. If that happens, the linux code
confusingly treats 0xffffffff as a valid IRQ number and panics at some
point.
A fix was recently merged in skiboot:
e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()")
but we need a workaround anyway to support older skiboots already
in the field.
Internally convert 0xffffffff to OPAL_RESOURCE which is the usual error
returned upon resource exhaustion.
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821713818.1985334.14123187368108582810.stgit@bahia.lan
(groug: fix arch/powerpc/platforms/powernv/opal-wrappers.S instead of
non-existing arch/powerpc/platforms/powernv/opal-call.c)
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3ab3a0689e74e6aa5b41360bc18861040ddef5b1 ]
When testing out gpio-keys with a button, a spurious
interrupt (and therefore a key press or release event)
gets triggered as soon as the driver enables the irq
line for the first time.
This patch clears any potential bogus generated interrupt
that was caused by the switching of the associated irq's
type and polarity.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e59a175faa8df9d674247946f2a5a9c29c835725 ]
CPU online/offline code paths are sensitive to parts of the device
tree (various cpu node properties, cache nodes) that can be changed as
a result of a migration.
Prevent CPU hotplug while the device tree potentially is inconsistent.
Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0aa82c482ab2ece530a6f44897b63b274bb43c8e upstream.
During post-migration device tree updates, we can oops in
pseries_update_drconf_memory() if the source device tree has an
ibm,dynamic-memory-v2 property and the destination has a
ibm,dynamic_memory (v1) property. The notifier processes an "update"
for the ibm,dynamic-memory property but it's really an add in this
scenario. So make sure the old property object is there before
dereferencing it.
Fixes: 2b31e3aec1db ("powerpc/drmem: Add support for ibm, dynamic-memory-v2 property")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 02c5f5394918b9b47ff4357b1b18335768cd867d upstream.
Since 902bdc57451c, get_pci_dev() calls pci_get_domain_bus_and_slot(). This
has the effect of incrementing the reference count of the PCI device, as
explained in drivers/pci/search.c:
* Given a PCI domain, bus, and slot/function number, the desired PCI
* device is located in the list of PCI devices. If the device is
* found, its reference count is increased and this function returns a
* pointer to its data structure. The caller must decrement the
* reference count by calling pci_dev_put(). If no device is found,
* %NULL is returned.
Nothing was done to call pci_dev_put() and the reference count of GPU and
NPU PCI devices rockets up.
A natural way to fix this would be to teach the callers about the change,
so that they call pci_dev_put() when done with the pointer. This turns
out to be quite intrusive, as it affects many paths in npu-dma.c,
pci-ioda.c and vfio_pci_nvlink2.c. Also, the issue appeared in 4.16 and
some affected code got moved around since then: it would be problematic
to backport the fix to stable releases.
All that code never cared for reference counting anyway. Call pci_dev_put()
from get_pci_dev() to revert to the previous behavior.
Fixes: 902bdc57451c ("powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn")
Cc: stable@vger.kernel.org # v4.16
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ecb78ef56e08d2119d337ae23cb951a640dc52d upstream.
Previously, only IBAT1 and IBAT2 were used to map kernel linear mem.
Since commit 63b2bc619565 ("powerpc/mm/32s: Use BATs for
STRICT_KERNEL_RWX"), we may have all 8 BATs used for mapping
kernel text. But the suspend/restore functions only save/restore
BATs 0 to 3, and clears BATs 4 to 7.
Make suspend and restore functions respectively save and reload
the 8 BATs on CPUs having MMU_FTR_USE_HIGH_BATS feature.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b59bd3527fe3c1939340df558d7f9d568fc9f882 ]
Currently init_imc_pmu() can fail either because we try to register an
IMC unit with an invalid domain (i.e an IMC node not supported by the
kernel) or something went wrong while registering a valid IMC unit. In
both the cases kernel provides a 'Register failed' error message.
For example when trace-imc node is not supported by the kernel, but
skiboot advertises a trace-imc node we print:
IMC Unknown Device type
IMC PMU (null) Register failed
To avoid confusion just print the unknown device type message, before
attempting PMU registration, so the second message isn't printed.
Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device")
Reported-by: Pavaman Subramaniyam <pavsubra@in.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Reword change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e9666d10a5677a494260d60d1fa0b73cc7646eb3 upstream.
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".
The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:
#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
# define HAVE_JUMP_LABEL
#endif
We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.
Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
[nc: Fix trivial conflicts in 4.19
arch/xtensa/kernel/jump_label.c doesn't exist yet
Ensured CC_HAVE_ASM_GOTO and HAVE_JUMP_LABEL were sufficiently
eliminated]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 860b7d2286236170a36f94946d03ca9888d32571 ]
The data structure (i.e struct imc_mem_info) to hold the memory address
information for nest imc units is allocated based on the number of nodes
in the system.
nest_imc_event_init() traverse this struct array to calculate the memory
base address for the event-cpu. If we fail to find a match for the event
cpu's chip-id in imc_mem_info struct array, then the do-while loop will
iterate until we crash.
Fix this by changing the loop exit condition based on the number of
non zero vbase elements in the array, since the allocation is done for
nr_chips + 1.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8adddf349fda0d3de2f6bb41ddf838cbf36a8ad2 upstream.
Joel reported weird crashes using skiroot_defconfig, in his case we
jumped into an NX page:
kernel tried to execute exec-protected page (c000000002bff4f0) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xc000000002bff4f0
Looking at the disassembly, we had simply branched to that address:
c000000000c001bc 49fff335 bl c000000002bff4f0
But that didn't match the original kernel image:
c000000000c001bc 4bfff335 bl c000000000bff4f0 <kobject_get+0x8>
When STRICT_KERNEL_RWX is enabled, and we're using the radix MMU, we
call radix__change_memory_range() late in boot to change page
protections. We do that both to mark rodata read only and also to mark
init text no-execute. That involves walking the kernel page tables,
and clearing _PAGE_WRITE or _PAGE_EXEC respectively.
With radix we may use hugepages for the linear mapping, so the code in
radix__change_memory_range() uses eg. pmd_huge() to test if it has
found a huge mapping, and if so it stops the page table walk and
changes the PMD permissions.
However if the kernel is built without HUGETLBFS support, pmd_huge()
is just a #define that always returns 0. That causes the code in
radix__change_memory_range() to incorrectly interpret the PMD value as
a pointer to a PTE page rather than as a PTE at the PMD level.
We can see this using `dv` in xmon which also uses pmd_huge():
0:mon> dv c000000000000000
pgd @ 0xc000000001740000
pgdp @ 0xc000000001740000 = 0x80000000ffffb009
pudp @ 0xc0000000ffffb000 = 0x80000000ffffa009
pmdp @ 0xc0000000ffffa000 = 0xc00000000000018f <- this is a PTE
ptep @ 0xc000000000000100 = 0xa64bb17da64ab07d <- kernel text
The end result is we treat the value at 0xc000000000000100 as a PTE
and clear _PAGE_WRITE or _PAGE_EXEC, potentially corrupting the code
at that address.
In Joel's specific case we cleared the sign bit in the offset of the
branch, causing a backward branch to turn into a forward branch which
caused us to branch into a non-executable page. However the exact
nature of the crash depends on kernel version, compiler version, and
other factors.
We need to fix radix__change_memory_range() to not use accessors that
depend on HUGETLBFS, but we also have radix memory hotplug code that
uses pmd_huge() etc that will also need fixing. So for now just
disallow the broken combination of Radix with HUGETLBFS disabled.
The only defconfig we have that is affected is skiroot_defconfig, so
turn on HUGETLBFS there so that it still gets Radix.
Fixes: 566ca99af026 ("powerpc/mm/radix: Add dummy radix_enabled()")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 81b61324922c67f73813d8a9c175f3c153f6a1c6 ]
On pseries systems, performing a partition migration can result in
altering the nodes a CPU is assigned to on the destination system. For
exampl, pre-migration on the source system CPUs are in node 1 and 3,
post-migration on the destination system CPUs are in nodes 2 and 3.
Handling the node change for a CPU can cause corruption in the slab
cache if we hit a timing where a CPUs node is changed while cache_reap()
is invoked. The corruption occurs because the slab cache code appears
to rely on the CPU and slab cache pages being on the same node.
The current dynamic updating of a CPUs node done in arch/powerpc/mm/numa.c
does not prevent us from hitting this scenario.
Changing the device tree property update notification handler that
recognizes an affinity change for a CPU to do a full DLPAR remove and
add of the CPU instead of dynamically changing its node resolves this
issue.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael W. Bringmann <mwb@linux.vnet.ibm.com>
Tested-by: Michael W. Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 11f5acce2fa43b015a8120fa7620fa4efd0a2952 ]
We store 2 multilevel tables in iommu_table - one for the hardware and
one with the corresponding userspace addresses. Before allocating
the tables, the iommu_table_group_ops::get_table_size() hook returns
the combined size of the two and VFIO SPAPR TCE IOMMU driver adjusts
the locked_vm counter correctly. When the table is actually allocated,
the amount of allocated memory is stored in iommu_table::it_allocated_size
and used to decrement the locked_vm counter when we release the memory
used by the table; .get_table_size() and .create_table() calculate it
independently but the result is expected to be the same.
However the allocator does not add the userspace table size to
.it_allocated_size so when we destroy the table because of VFIO PCI
unplug (i.e. VFIO container is gone but the userspace keeps running),
we decrement locked_vm by just a half of size of memory we are
releasing.
To make things worse, since we enabled on-demand allocation of
indirect levels, it_allocated_size contains only the amount of memory
actually allocated at the table creation time which can just be a
fraction. It is not a problem with incrementing locked_vm (as
get_table_size() value is used) but it is with decrementing.
As the result, we leak locked_vm and may not be able to allocate more
IOMMU tables after few iterations of hotplug/unplug.
This sets it_allocated_size in the pnv_pci_ioda2_ops::create_table()
hook to what pnv_pci_ioda2_get_table_size() returns so from now on we
have a single place which calculates the maximum memory a table can
occupy. The original meaning of it_allocated_size is somewhat lost now
though.
We do not ditch it_allocated_size whatsoever here and we do not call
get_table_size() from vfio_iommu_spapr_tce.c when decrementing
locked_vm as we may have multiple IOMMU groups per container and even
though they all are supposed to have the same get_table_size()
implementation, there is a small chance for failure or confusion.
Fixes: 090bad39b237 ("powerpc/powernv: Add indirect levels to it_userspace")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ce9afe08e71e3f7d64f337a6e932e50849230fc2 upstream.
In cpu_to_drc_index() in the case when FW_FEATURE_DRC_INFO is absent,
we currently use of_read_property() to obtain the pointer to the array
corresponding to the property "ibm,drc-indexes". The elements of this
array are of type __be32, but are accessed without any conversion to
the OS-endianness, which is buggy on a Little Endian OS.
Fix this by using of_property_read_u32_index() accessor function to
safely read the elements of the array.
Fixes: e83636ac3334 ("pseries/drc-info: Search DRC properties for CPU indexes")
Cc: stable@vger.kernel.org # v4.16+
Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
[mpe: Make the WARN_ON a WARN_ON_ONCE so it's not retriggerable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 19f8a5b5be2898573a5e1dc1db93e8d40117606a upstream.
Commit 24be85a23d1f ("powerpc/powernv: Clear PECE1 in LPCR via stop-api
only on Hotplug", 2017-07-21) added two calls to opal_slw_set_reg()
inside pnv_cpu_offline(), with the aim of changing the LPCR value in
the SLW image to disable wakeups from the decrementer while a CPU is
offline. However, pnv_cpu_offline() gets called each time a secondary
CPU thread is woken up to participate in running a KVM guest, that is,
not just when a CPU is offlined.
Since opal_slw_set_reg() is a very slow operation (with observed
execution times around 20 milliseconds), this means that an offline
secondary CPU can often be busy doing the opal_slw_set_reg() call
when the primary CPU wants to grab all the secondary threads so that
it can run a KVM guest. This leads to messages like "KVM: couldn't
grab CPU n" being printed and guest execution failing.
There is no need to reprogram the SLW image on every KVM guest entry
and exit. So that we do it only when a CPU is really transitioning
between online and offline, this moves the calls to
pnv_program_cpu_hotplug_lpcr() into pnv_smp_cpu_kill_self().
Fixes: 24be85a23d1f ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 36da5ff0bea2dc67298150ead8d8471575c54c7d upstream.
The 83xx has 8 SPRG registers and uses at least SPRG4
for DTLB handling LRU.
Fixes: 2319f1239592 ("powerpc/mm: e300c2/c3/c4 TLB errata workaround")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b62f9bd2246b7d3d086e571397c14ba52645ef1 upstream.
Currently the opal log is globally readable. It is kernel policy to
limit the visibility of physical addresses / kernel pointers to root.
Given this and the fact the opal log may contain this information it
would be better to limit the readability to root.
Fixes: bfc36894a48b ("powerpc/powernv: Add OPAL message log interface")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Stewart Smith <stewart@linux.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d183ca8baec983dc4208ca45ece3c36763df912 upstream.
'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC
deny the use of BATS for mapping memory.
This patch makes sure that the specific wii RAM mapping function
takes it into account as well.
Fixes: de32400dd26e ("wii: use both mem1 and mem2 as ram")
Cc: stable@vger.kernel.org
Reviewed-by: Jonathan Neuschafer <j.neuschaefer@gmx.net>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0db6896ff6332ba694f1e61b93ae3b2640317633 ]
For fadump to work successfully there should not be any holes in reserved
memory ranges where kernel has asked firmware to move the content of old
kernel memory in event of crash. Now that fadump uses CMA for reserved
area, this memory area is now not protected from hot-remove operations
unless it is cma allocated. Hence, fadump service can fail to re-register
after the hot-remove operation, if hot-removed memory belongs to fadump
reserved region. To avoid this make sure that memory from fadump reserved
area is not hot-removable if fadump is registered.
However, if user still wants to remove that memory, he can do so by
manually stopping fadump service before hot-remove operation.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
addresses on demand
[ Upstream commit bdbf649efe21173cae63b4b71db84176420f9039 ]
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses; the latter is used for
marking pages dirty when corresponging TCEs are unmapped from
the hardware table.
a68bd1267b72 ("powerpc/powernv/ioda: Allocate indirect TCE levels
on demand") enabled on-demand allocation of the hardware table,
however it missed the other table so it has still been fully allocated
at the boot time. This fixes the issue by allocating a single level,
just like we do for the hardware table.
Fixes: a68bd1267b72 ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ]
The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs(). This results in a refcount imbalance
for nodes attached with dlpar_attach_node(). The calling sequence
from dlpar_attach_node() to __of_attach_node_sysfs() is:
dlpar_attach_node()
of_attach_node()
__of_attach_node_sysfs()
For more detailed description of the node refcount, see
commit 68baf692c435 ("powerpc/pseries: Fix of_node_put() underflow
during DLPAR remove").
Tested-by: Alan Tull <atull@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2a056f58fd33ccc6a0261b552b0f17e7fa4a12f3 upstream.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3f7daf3d7582dc6628ac40a9045dd1bbd80c5f35 ]
When hot-removing memory release_mem_region_adjustable() splits iomem
resources if they are not the exact size of the memory being
hot-deleted. Adding this memory back to the kernel adds a new resource.
Eg a node has memory 0x0 - 0xfffffffff. Hot-removing 1GB from
0xf40000000 results in the single resource 0x0-0xfffffffff being split
into two resources: 0x0-0xf3fffffff and 0xf80000000-0xfffffffff.
When we hot-add the memory back we now have three resources:
0x0-0xf3fffffff, 0xf40000000-0xf7fffffff, and 0xf80000000-0xfffffffff.
This is an issue if we try to remove some memory that overlaps
resources. Eg when trying to remove 2GB at address 0xf40000000,
release_mem_region_adjustable() fails as it expects the chunk of memory
to be within the boundaries of a single resource. We then get the
warning: "Unable to release resource" and attempting to use memtrace
again gives us this error: "bash: echo: write error: Resource
temporarily unavailable"
This patch makes memtrace remove memory in chunks that are always the
same size from an address that is always equal to end_of_memory -
n*size, for some n. So hotremoving and hotadding memory of different
sizes will now not attempt to remove memory that spans multiple
resources.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mpe: This was fixed originally in commit d3d4ffaae439
("powerpc/powernv/ioda2: Reduce upper limit for DMA window size"), but
contrary to what the merge commit says was inadvertently lost by me in
commit ce57c6610cc2 ("Merge branch 'topic/ppc-kvm' into next") which
brought in changes that moved the code to a new file. So reapply it to
the new file.
Original commit message follows:
We use PHB in mode1 which uses bit 59 to select a correct DMA window.
However there is mode2 which uses bits 59:55 and allows up to 32 DMA
windows per a PE.
Even though documentation does not clearly specify that, it seems that
the actual hardware does not support bits 59:55 even in mode1, in
other words we can create a window as big as 1<<58 but DMA simply
won't work.
This reduces the upper limit from 59 to 55 bits to let the userspace
know about the hardware limits.
Fixes: ce57c6610cc2 ("Merge branch 'topic/ppc-kvm' into next")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Pull IDA updates from Matthew Wilcox:
"A better IDA API:
id = ida_alloc(ida, GFP_xxx);
ida_free(ida, id);
rather than the cumbersome ida_simple_get(), ida_simple_remove().
The new IDA API is similar to ida_simple_get() but better named. The
internal restructuring of the IDA code removes the bitmap
preallocation nonsense.
I hope the net -200 lines of code is convincing"
* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
ida: Change ida_get_new_above to return the id
ida: Remove old API
test_ida: check_ida_destroy and check_ida_alloc
test_ida: Convert check_ida_conv to new API
test_ida: Move ida_check_max
test_ida: Move ida_check_leaf
idr-test: Convert ida_check_nomem to new API
ida: Start new test_ida module
target/iscsi: Allocate session IDs from an IDA
iscsi target: fix session creation failure handling
drm/vmwgfx: Convert to new IDA API
dmaengine: Convert to new IDA API
ppc: Convert vas ID allocation to new IDA API
media: Convert entity ID allocation to new IDA API
ppc: Convert mmu context allocation to new IDA API
Convert net_namespace to new IDA API
cb710: Convert to new IDA API
rsxx: Convert to new IDA API
osd: Convert to new IDA API
sd: Convert to new IDA API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- An implementation for the newly added hv_ops->flush() for the OPAL
hvc console driver backends, I forgot to apply this after merging the
hvc driver changes before the merge window.
- Enable all PCI bridges at boot on powernv, to avoid races when
multiple children of a bridge try to enable it simultaneously. This
is a workaround until the PCI core can be enhanced to fix the races.
- A fix to query PowerVM for the correct system topology at boot before
initialising sched domains, seen in some configurations to cause
broken scheduling etc.
- A fix for pte_access_permitted() on "nohash" platforms.
- Two commits to fix SIGBUS when using remap_pfn_range() seen on Power9
due to a workaround when using the nest MMU (GPUs, accelerators).
- Another fix to the VFIO code used by KVM, the previous fix had some
bugs which caused guests to not start in some configurations.
- A handful of other minor fixes.
Thanks to: Aneesh Kumar K.V, Benjamin Herrenschmidt, Christophe Leroy,
Hari Bathini, Luke Dashjr, Mahesh Salgaonkar, Nicholas Piggin, Paul
Mackerras, Srikar Dronamraju.
* tag 'powerpc-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mce: Fix SLB rebolting during MCE recovery path.
KVM: PPC: Book3S: Fix guest DMA when guest partially backed by THP pages
powerpc/mm/radix: Only need the Nest MMU workaround for R -> RW transition
powerpc/mm/books3s: Add new pte bit to mark pte temporarily invalid.
powerpc/nohash: fix pte_access_permitted()
powerpc/topology: Get topology for shared processors at boot
powerpc64/ftrace: Include ftrace.h needed for enable/disable calls
powerpc/powernv/pci: Work around races in PCI bridge enabling
powerpc/fadump: cleanup crash memory ranges support
powerpc/powernv: provide a console flush operation for opal hvc driver
powerpc/traps: Avoid rate limit messages from show unhandled signals
powerpc/64s: Fix PACA_IRQ_HARD_DIS accounting in idle_power4()
|
|
Also add these typos to spelling.txt so checkpatch.pl will look for them.
Link: http://lkml.kernel.org/r/88af06b9de34d870cb0afc46cfd24e0458be2575.1529471371.git.fthain@telegraphics.com.au
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Removes a custom spinlock and simplifies the code. Also fix an
error where we could allocate one ID too many.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
|
|
The generic code is racy when multiple children of a PCI bridge try to
enable it simultaneously.
This leads to drivers trying to access a device through a
not-yet-enabled bridge, and this EEH errors under various
circumstances when using parallel driver probing.
There is work going on to fix that properly in the PCI core but it
will take some time.
x86 gets away with it because (outside of hotplug), the BIOS enables
all the bridges at boot time.
This patch does the same thing on powernv by enabling all bridges that
have child devices at boot time, thus avoiding subsequent races. It's
suitable for backporting to stable and distros, while the proper PCI
fix will probably be significantly more invasive.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Provide the flush hv_op for the opal hvc driver. This will flush the
firmware console buffers without spinning with interrupts disabled.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Merge updates from Andrew Morton:
- a few misc things
- a few Y2038 fixes
- ntfs fixes
- arch/sh tweaks
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits)
mm/hmm.c: remove unused variables align_start and align_end
fs/userfaultfd.c: remove redundant pointer uwq
mm, vmacache: hash addresses based on pmd
mm/list_lru: introduce list_lru_shrink_walk_irq()
mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one()
mm/list_lru.c: move locking from __list_lru_walk_one() to its caller
mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node()
mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP
mm/sparse: delete old sparse_init and enable new one
mm/sparse: add new sparse_init_nid() and sparse_init()
mm/sparse: move buffer init/fini to the common place
mm/sparse: use the new sparse buffer functions in non-vmemmap
mm/sparse: abstract sparse buffer allocations
mm/hugetlb.c: don't zero 1GiB bootmem pages
mm, page_alloc: double zone's batchsize
mm/oom_kill.c: document oom_lock
mm/hugetlb: remove gigantic page support for HIGHMEM
mm, oom: remove sleep from under oom_lock
kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()
mm/cma: remove unsupported gfp_mask parameter from cma_alloc()
...
|
|
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t")
In this patch all the caller of handle_mm_fault() are changed to return
vm_fault_t type.
Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- A fix for a bug in our page table fragment allocator, where a page
table page could be freed and reallocated for something else while
still in use, leading to memory corruption etc. The fix reuses
pt_mm in struct page (x86 only) for a powerpc only refcount.
- Fixes to our pkey support. Several are user-visible changes, but
bring us in to line with x86 behaviour and/or fix outright bugs.
Thanks to Florian Weimer for reporting many of these.
- A series to improve the hvc driver & related OPAL console code,
which have been seen to cause hardlockups at times. The hvc driver
changes in particular have been in linux-next for ~month.
- Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.
- Remove Power8 DD1 and Power9 DD1 support, neither chip should be in
use anywhere other than as a paper weight.
- An optimised memcmp implementation using Power7-or-later VMX
instructions
- Support for barrier_nospec on some NXP CPUs.
- Support for flushing the count cache on context switch on some IBM
CPUs (controlled by firmware), as a Spectre v2 mitigation.
- A series to enhance the information we print on unhandled signals
to bring it into line with other arches, including showing the
offending VMA and dumping the instructions around the fault.
Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey
Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan,
Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski,
Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng,
Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph
Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave
Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer,
Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel
Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh
Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues,
Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha,
Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul
Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza
Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood,
Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat
Rao, zhong jiang"
* tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits)
powerpc/mm/book3s/radix: Add mapping statistics
powerpc/uaccess: Enable get_user(u64, *p) on 32-bit
powerpc/mm/hash: Remove unnecessary do { } while(0) loop
powerpc/64s: move machine check SLB flushing to mm/slb.c
powerpc/powernv/idle: Fix build error
powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range
powerpc/mm: remove warning about ‘type’ being set
powerpc/32: Include setup.h header file to fix warnings
powerpc: Move `path` variable inside DEBUG_PROM
powerpc/powermac: Make some functions static
powerpc/powermac: Remove variable x that's never read
cxl: remove a dead branch
powerpc/powermac: Add missing include of header pmac.h
powerpc/kexec: Use common error handling code in setup_new_fdt()
powerpc/xmon: Add address lookup for percpu symbols
powerpc/mm: remove huge_pte_offset_and_shift() prototype
powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled
powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.
powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements
powerpc/fadump: handle crash memory ranges array index overflow
...
|
|
Fix the below build error using strlcpy instead of strncpy
In function 'pnv_parse_cpuidle_dt',
inlined from 'pnv_init_idle_states' at arch/powerpc/platforms/powernv/idle.c:840:7,
inlined from '__machine_initcall_powernv_pnv_init_idle_states' at arch/powerpc/platforms/powernv/idle.c:870:1:
arch/powerpc/platforms/powernv/idle.c:820:3: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
strncpy(pnv_idle_states[i].name, temp_string[i],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PNV_IDLE_NAME_LEN);
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
These functions can all be static, make it so. Fix warnings treated as
errors with W=1:
arch/powerpc/platforms/powermac/pci.c:1022:6: error: no previous prototype for ‘pmac_pci_fixup_ohci’
arch/powerpc/platforms/powermac/pci.c:1057:6: error: no previous prototype for ‘pmac_pci_fixup_cardbus’
arch/powerpc/platforms/powermac/pci.c:1094:6: error: no previous prototype for ‘pmac_pci_fixup_pciata’
Remove has_address declaration and assignment since it's not used.
Also add gcc attribute unused to fix a warning treated as error with
W=1:
arch/powerpc/platforms/powermac/pci.c:784:19: error: variable ‘has_address’ set but not used
arch/powerpc/platforms/powermac/pci.c:907:22: error: variable ‘ht’ set but not used
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Since the value of x is never intended to be read, remove it. Fix
warning treated as error with W=1:
arch/powerpc/platforms/powermac/udbg_scc.c:76:9: error: variable ‘x’ set but not used
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The header `pmac.h` was not included, leading to the following warnings,
treated as error with W=1:
arch/powerpc/platforms/powermac/time.c:69:13: error: no previous prototype for ‘pmac_time_init’ [-Werror=missing-prototypes]
arch/powerpc/platforms/powermac/time.c:207:15: error: no previous prototype for ‘pmac_get_boot_time’ [-Werror=missing-prototypes]
arch/powerpc/platforms/powermac/time.c:222:6: error: no previous prototype for ‘pmac_get_rtc_time’ [-Werror=missing-prototypes]
arch/powerpc/platforms/powermac/time.c:240:5: error: no previous prototype for ‘pmac_set_rtc_time’ [-Werror=missing-prototypes]
arch/powerpc/platforms/powermac/time.c:259:12: error: no previous prototype for ‘via_calibrate_decr’ [-Werror=missing-prototypes]
arch/powerpc/platforms/powermac/time.c:311:13: error: no previous prototype for ‘pmac_calibrate_decr’ [-Werror=missing-prototypes]
The function `via_calibrate_decr` was made static to silence a warning.
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
During Machine Check interrupt on pseries platform, register r3 points
RTAS extended event log passed by hypervisor. Since hypervisor uses r3
to pass pointer to rtas log, it stores the original r3 value at the
start of the memory (first 8 bytes) pointed by r3. Since hypervisor
stores this info and rtas log is in BE format, linux should make
sure to restore r3 value in correct endian format.
Without this patch when MCE handler, after recovery, returns to code that
that caused the MCE may end up with Data SLB access interrupt for invalid
address followed by kernel panic or hang.
Severe Machine check interrupt [Recovered]
NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel]
Initiator: CPU
Error type: SLB [Multihit]
Effective address: d00000000ca70000
cpu 0xa: Vector: 380 (Data SLB Access) at [c0000000fc7775b0]
pc: c0000000009694c0: vsnprintf+0x80/0x480
lr: c0000000009698e0: vscnprintf+0x20/0x60
sp: c0000000fc777830
msr: 8000000002009033
dar: a803a30c000000d0
current = 0xc00000000bc9ef00
paca = 0xc00000001eca5c00 softe: 3 irq_happened: 0x01
pid = 8860, comm = insmod
vscnprintf+0x20/0x60
vprintk_emit+0xb4/0x4b0
vprintk_func+0x5c/0xd0
printk+0x38/0x4c
init_module+0x1c0/0x338 [bork_kernel]
do_one_initcall+0x54/0x230
do_init_module+0x8c/0x248
load_module+0x12b8/0x15b0
sys_finit_module+0xa8/0x110
system_call+0x58/0x6c
--- Exception: c00 (System Call) at 00007fff8bda0644
SP (7fffdfbfe980) is in userspace
This patch fixes this issue.
Fixes: a08a53ea4c97 ("powerpc/le: Enable RTAS events support")
Cc: stable@vger.kernel.org # v3.15+
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch allows the memory removed by memtrace to be readded to the
kernel. So now you don't have to reboot your system to add the memory
back to the kernel or to have a different amount of memory removed.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Tested-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
Naveen N. Rao
Nathan Fontenot
Nicholas Piggin
David Hildenbrand
Gautham R. Shenoy
Alexey Kardashevskiy
Andrew Donnellan
Nathan Lynch
Madhavan Srinivasan
Greg Kurz
Christian Lamparter
Christophe Leroy
Anju T Sudhakar
Masahiro Yamada
Michael Ellerman
Paul Mackerras
Jordan Niethe
Mahesh Salgaonkar
Frank Rowand
Rashmica Gupta
Linus Torvalds
Finn Thain
Matthew Wilcox
Benjamin Herrenschmidt
Souptick Joarder
Aneesh Kumar K.V
Mathieu Malaterre