aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel
AgeCommit message (Collapse)Author
2018-06-03powerpc/eeh: Add message when PE processing at parentSam Bobroff
To aid debugging, add a message to show when EEH processing for a PE will be done at the device's parent, rather than directly at the device. Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/eeh: Strengthen types of eeh traversal functionsSam Bobroff
The traversal functions eeh_pe_traverse() and eeh_pe_dev_traverse() both provide their first argument as void * but every single user casts it to the expected type. Change the type of the first parameter from void * to the appropriate type, and clean up all uses. Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/eeh: Remove unused eeh_pcid_name()Sam Bobroff
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/eeh: Fix use-after-release of EEH driverSam Bobroff
Correct two cases where eeh_pcid_get() is used to reference the driver's module but the reference is dropped before the driver pointer is used. In eeh_rmv_device() also refactor a little so that only two calls to eeh_pcid_put() are needed, rather than three and the reference isn't taken at all if it wasn't needed. Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/eeh: Add final message for successful recoverySam Bobroff
Add a single log line at the end of successful EEH recovery, so that it's clear that event processing has finished. Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: remove unused to_tm() helperArnd Bergmann
to_tm() is now completely unused, the only reference being in the _dump_time() helper that is also unused. This removes both, leaving the rest of the powerpc RTC code y2038 safe to as far as the hardware supports. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: use time64_t in update_persistent_clockArnd Bergmann
update_persistent_clock() is deprecated because it suffers from overflow in 2038 on 32-bit architectures. This changes powerpc to use the update_persistent_clock64() replacement, and to pass down 64-bit timestamps consistently. This is now simpler, as we no longer have to worry about the offset numbers in tm_year and tm_mon that are different between the Linux conventions and RTAS. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: use time64_t in read_persistent_clockArnd Bergmann
Looking through the remaining users of the deprecated mktime() function, I found the powerpc rtc handlers, which use it in place of rtc_tm_to_time64(). To clean this up, I'm changing over the read_persistent_clock() function to the read_persistent_clock64() variant, and change all the platform specific handlers along with it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: rtas: clean up time handlingArnd Bergmann
The to_tm() helper function operates on a signed integer for the time, so it will suffer from overflow in 2038, even on 64-bit kernels. Rather than fix that function, this replaces its use in the rtas procfs implementation with the standard rtc_time64_to_tm() helper that is very similar but is not affected by the overflow. In order to actually support long times, the parser function gets changed to 64-bit user input and output as well. Note that the tm_mon and tm_year representation is slightly different, so we have to manually add an offset here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/mm/hash: Add missing isync prior to kernel stack SLB switchAneesh Kumar K.V
Currently we do not have an isync, or any other context synchronizing instruction prior to the slbie/slbmte in _switch() that updates the SLB entry for the kernel stack. However that is not correct as outlined in the ISA. From Power ISA Version 3.0B, Book III, Chapter 11, page 1133: "Changing the contents of ... the contents of SLB entries ... can have the side effect of altering the context in which data addresses and instruction addresses are interpreted, and in which instructions are executed and data accesses are performed. ... These side effects need not occur in program order, and therefore may require explicit synchronization by software. ... The synchronizing instruction before the context-altering instruction ensures that all instructions up to and including that synchronizing instruction are fetched and executed in the context that existed before the alteration." And page 1136: "For data accesses, the context synchronizing instruction before the slbie, slbieg, slbia, slbmte, tlbie, or tlbiel instruction ensures that all preceding instructions that access data storage have completed to a point at which they have reported all exceptions they will cause." We're not aware of any bugs caused by this, but it should be fixed regardless. Add the missing isync when updating kernel stack SLB entry. Cc: stable@vger.kernel.org Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Flesh out change log with more ISA text & explanation] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: use task_pid_nr() for TID allocationAlastair D'Silva
The current implementation of TID allocation, using a global IDR, may result in an errant process starving the system of available TIDs. Instead, use task_pid_nr(), as mentioned by the original author. The scenario described which prevented it's use is not applicable, as set_thread_tidr can only be called after the task struct has been populated. In the unlikely event that 2 threads share the TID and are waiting, all potential outcomes have been determined safe. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: Use TIDR CPU feature to control TIDR allocationAlastair D'Silva
Switch the use of TIDR on it's CPU feature, rather than assuming it is available based on architecture. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: Add TIDR CPU feature for POWER9Alastair D'Silva
This patch adds a CPU feature bit to show whether the CPU has the TIDR register available, enabling as_notify/wait in userspace. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/64: change softe to irqmask in show_regs and xmonNicholas Piggin
When the soft enabled flag was changed to a soft disable mask, xmon and register dump code was not updated to reflect that, which is confusing ('SOFTE: 1' previously meant interrupts were soft enabled, currently it means the opposite, the general interrupt type has been disabled). Fix this by using the name irqmask, and printing it in hex. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/time: account broadcast timer event interrupts separatelyNicholas Piggin
These are not local timer interrupts but IPIs. It's good to be able to see how timer offloading is behaving, so split these out into their own category. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: move a stray NMI IPI case under NMI_IPI ifdefNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: move timer broadcast code under GENERIC_CLOCKEVENTS_BROADCAST ifdefNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: allow soft-NMI watchdog to cover timer interrupts with large ↵Nicholas Piggin
decrementers Large decrementers (e.g., POWER9) can take a very long time to wrap, so when the timer iterrupt handler sets the decrementer to max so as to avoid taking another decrementer interrupt when hard enabling interrupts before running timers, it effectively disables the soft NMI coverage for timer interrupts. Fix this by using the traditional 31-bit value instead, which wraps after a few seconds. masked interrupt code does the same thing, and in normal operation neither of these paths would ever wrap even the 31 bit value. Note: the SMP watchdog should catch timer interrupt lockups, but it is preferable for the local soft-NMI to catch them, mainly to avoid the IPI. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: generic clockevents broadcast receiver call tick_receive_broadcastNicholas Piggin
The broadcast tick recipient can call tick_receive_broadcast rather than re-running the full timer interrupt. It does not have to check for the next event time, because the sender already determined the timer has expired. It does not have to test irq_work_pending, because that's a direct decrementer interrupt and does not go through the clock events subsystem. And it does not have to read PURR because that was removed with the previous patch. This results in no code size change, but both the decrementer and broadcast path lengths are reduced. Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/pseries: lparcfg calculate PURR on demandNicholas Piggin
For SPLPAR, lparcfg provides a sum of PURR registers for all CPUs. Currently this is done by reading PURR in context switch and timer interrupt, and storing that into a per-CPU variable. These are summed to provide the value. This does not work with all timer schemes (e.g., NO_HZ_FULL), and it is sub-optimal for performance because it reads the PURR register on every context switch, although that's been difficult to distinguish from noise in the contxt_switch microbenchmark. This patch implements the sum by calling a function on each CPU, to read and add PURR values of each CPU. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/64: remove start_tb and accum_tb from thread_structNicholas Piggin
These fields are only written to. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/64: irq_work avoid interrupt when called with hardware irqs enabledNicholas Piggin
irq_work_raise should not cause a decrementer exception unless it is called from NMI context. Doing so often just results in an immediate masked decrementer interrupt: <...>-550 90d... 4us : update_curr_rt <-dequeue_task_rt <...>-550 90d... 5us : dbs_update_util_handler <-update_curr_rt <...>-550 90d... 6us : arch_irq_work_raise <-irq_work_queue <...>-550 90d... 7us : soft_nmi_interrupt <-soft_nmi_common <...>-550 90d... 7us : printk_nmi_enter <-soft_nmi_interrupt <...>-550 90d.Z. 8us : rcu_nmi_enter <-soft_nmi_interrupt <...>-550 90d.Z. 9us : rcu_nmi_exit <-soft_nmi_interrupt <...>-550 90d... 9us : printk_nmi_exit <-soft_nmi_interrupt <...>-550 90d... 10us : cpuacct_charge <-update_curr_rt The soft_nmi_interrupt here is the call into the watchdog, due to the decrementer interrupt firing with irqs soft-disabled. This is harmless, but sub-optimal. When it's not called from NMI context or with interrupts enabled, mark the decrementer pending in the irq_happened mask directly, rather than having the masked decrementer interupt handler do it. This will be replayed at the next local_irq_enable. See the comment for details. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc: Fix build by disabling attribute-alias warning for SYSCALL_DEFINExChristophe Leroy
GCC 8.1 emits warnings such as the following. As arch/powerpc code is built with -Werror, this breaks the build with GCC 8.1. In file included from arch/powerpc/kernel/pci_64.c:23: ./include/linux/syscalls.h:233:18: error: 'sys_pciconfig_iobase' alias between functions of incompatible types 'long int(long int, long unsigned int, long unsigned int)' and 'long int(long int, long int, long int)' [-Werror=attribute-alias] asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ ^~~ ./include/linux/syscalls.h:222:2: note: in expansion of macro '__SYSCALL_DEFINEx' __SYSCALL_DEFINEx(x, sname, __VA_ARGS__) This patch inhibits those warnings. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Trim change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03powerpc/64: Fix strncpy() related build failures with GCC 8.1Christophe Leroy
GCC 8.1 warns about possible string truncation: arch/powerpc/kernel/nvram_64.c:1042:2: error: 'strncpy' specified bound 12 equals destination size [-Werror=stringop-truncation] strncpy(new_part->header.name, name, 12); arch/powerpc/platforms/ps3/repository.c:106:2: error: 'strncpy' output truncated before terminating nul copying 8 bytes from a string of the same length [-Werror=stringop-truncation] strncpy((char *)&n, text, 8); Fix it by using memcpy(). To make that safe we need to ensure the destination is pre-zeroed. Use kzalloc() in the nvram code and initialise the u64 to zero in the ps3 code. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Use kzalloc() in the nvram code, flesh out change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03Merge branch 'fixes' into nextMichael Ellerman
We ended up with an ugly conflict between fixes and next in ftrace.h involving multiple nested ifdefs, and the automatic resolution is wrong. So merge fixes into next so we can fix it up.
2018-06-03Merge branch 'topic/kbuild' into nextMichael Ellerman
Merge in some commits we're sharing with the kbuild tree.
2018-06-03Merge branch 'topic/ppc-kvm' into nextMichael Ellerman
Merge in some commits we're sharing with the kvm-ppc tree.
2018-06-02powerpc/prom: Fix %u/%llx usage since prom_printf() changeMathieu Malaterre
In commit eae5f709a4d7 ("powerpc: Add __printf verification to prom_printf") __printf attribute was added to prom_printf(), which means GCC started warning about type/format mismatches. As part of that commit we changed some "%lx" formats to "%llx" where the type is actually unsigned long long. Unfortunately prom_printf() doesn't know how to print "%llx", it just prints a literal "lx", eg: reserved memory map: lx - lx lx - lx prom_printf() also doesn't know how to print "%u" (only "%lu"), it just prints a literal "u", eg: Max number of cores passed to firmware: u (NR_CPUS = 2048) Instead of: Max number of cores passed to firmware: 2048 (NR_CPUS = 2048) This commit adds support for the missing formatters. Fixes: eae5f709a4d7 ("powerpc: Add __printf verification to prom_printf") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mathieu Malaterre <malat@debian.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-01powerpc/kbuild: Remove CROSS32 defines from top level powerpc MakefileNicholas Piggin
Switch VDSO32 build over to use CROSS32_COMPILE directly, and have it pass in -m32 after the standard c_flags. This allows endianness overrides to be removed and the endian and bitness flags moved into standard flags variables. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-31Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-nextPaul Mackerras
This merges in the ppc-kvm topic branch of the powerpc repository to get some changes on which future patches will depend, in particular some new exports and TEXASR bit definitions. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-05-29powerpc/livepatch: Fix build error with kprobes disabled.Aneesh Kumar K.V
arch/powerpc/kernel/stacktrace.c: In function ‘save_stack_trace_tsk_reliable’: arch/powerpc/kernel/stacktrace.c:176:28: error: ‘kretprobe_trampoline’ undeclared if (ip == (unsigned long)kretprobe_trampoline) ^~~~~~~~~~~~~~~~~~~~ Fixes: df78d3f61480 ("powerpc/livepatch: Implement reliable stack tracing for the consistency model") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-28powerpc/modules: remove unused mod_arch_specific.toc fieldJosh Poimboeuf
The toc field in the mod_arch_specific struct isn't actually used anywhere, so remove it. Also the ftrace-specific fields are now common between 32-bit and 64-bit, so simplify the struct definition a bit by moving them out of the __powerpc64__ #ifdef. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "PPC: - Close a hole which could possibly lead to the host timebase getting out of sync. - Three fixes relating to PTEs and TLB entries for radix guests. - Fix a bug which could lead to an interrupt never getting delivered to the guest, if it is pending for a guest vCPU when the vCPU gets offlined. s390: - Fix false negatives in VSIE validity check (Cc stable) x86: - Fix time drift of VMX preemption timer when a guest uses LAPIC timer in periodic mode (Cc stable) - Unconditionally expose CPUID.IA32_ARCH_CAPABILITIES to allow migration from hosts that don't need retpoline mitigation (Cc stable) - Fix guest crashes on reboot by properly coupling CR4.OSXSAVE and CPUID.OSXSAVE (Cc stable) - Report correct RIP after Hyper-V hypercall #UD (introduced in -rc6)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix #UD address of failed Hyper-V hypercalls kvm: x86: IA32_ARCH_CAPABILITIES is always supported KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed x86/kvm: fix LAPIC timer drift when guest uses periodic mode KVM: s390: vsie: fix < 8k check for the itdba KVM: PPC: Book 3S HV: Do ptesync in radix guest exit path KVM: PPC: Book3S HV: XIVE: Resend re-routed interrupts on CPU priority change KVM: PPC: Book3S HV: Make radix clear pte when unmapping KVM: PPC: Book3S HV: Make radix use correct tlbie sequence in kvmppc_radix_tlbie_page KVM: PPC: Book3S HV: Snapshot timebase offset on guest entry
2018-05-25Merge tag 'powerpc-4.17-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "Just one fix, to make sure the PCR (Processor Compatibility Register) is reset on boot. Otherwise if we're running in compat mode in a guest (eg. pretending a Power9 is a Power8) and the host kernel oopses and kdumps then the kdump kernel's userspace will be running in Power8 mode, and will SIGILL if it uses Power9-only instructions. Thanks to Michael Neuling" * tag 'powerpc-4.17-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Clear PCR on boot
2018-05-25powerpc: Add a missing include headerMathieu Malaterre
The header file <asm/switch_to.h> was missing from the includes. Fix the following warning, treated as error with W=1: arch/powerpc/kernel/vecemu.c:260:5: error: no previous prototype for ‘emulate_altivec’ [-Werror=missing-prototypes] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc/32: Add a missing include headerMathieu Malaterre
The header file <linux/syscalls.h> was missing from the includes. Fix the following warning, treated as error with W=1: arch/powerpc/kernel/pci_32.c:286:6: error: no previous prototype for ‘sys_pciconfig_iobase’ [-Werror=missing-prototypes] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc/tau: Make some function staticMathieu Malaterre
These functions can all be static, make it so. Fix warnings treated as errors with W=1: arch/powerpc/kernel/tau_6xx.c:53:6: error: no previous prototype for ‘set_thresholds’ [-Werror=missing-prototypes] arch/powerpc/kernel/tau_6xx.c:73:6: error: no previous prototype for ‘TAUupdate’ [-Werror=missing-prototypes] arch/powerpc/kernel/tau_6xx.c:208:13: error: no previous prototype for ‘TAU_init_smp’ [-Werror=missing-prototypes] arch/powerpc/kernel/tau_6xx.c:220:12: error: no previous prototype for ‘TAU_init’ [-Werror=missing-prototypes] arch/powerpc/kernel/tau_6xx.c:126:6: error: no previous prototype for ‘TAUException’ [-Werror=missing-prototypes] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc: Make function btext_initialize staticMathieu Malaterre
This function can be static, make it so, this fix a warning treated as error with W=1: arch/powerpc/kernel/btext.c:173:5: error: no previous prototype for ‘btext_initialize’ [-Werror=missing-prototypes] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc/tau: Synchronize function prototypes and bodyMathieu Malaterre
Some function prototypes and body for Thermal Assist Units were not in sync. Update the function definition to match the existing function declaration found in `setup-common.c`, changing an `int` return type to a `u32` return type. Move the prototypes to a header file. Fix the following warnings, treated as error with W=1: arch/powerpc/kernel/tau_6xx.c:257:5: error: no previous prototype for ‘cpu_temp_both’ [-Werror=missing-prototypes] arch/powerpc/kernel/tau_6xx.c:262:5: error: no previous prototype for ‘cpu_temp’ [-Werror=missing-prototypes] arch/powerpc/kernel/tau_6xx.c:267:5: error: no previous prototype for ‘tau_interrupts’ [-Werror=missing-prototypes] Compile tested with CONFIG_TAU_INT. Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc/mm/radix: Use do/while(0) trick for single statement blockMathieu Malaterre
In commit 7a22d6321c3d ("powerpc/mm/radix: Update command line parsing for disable_radix") an `if` statement was added for a possible empty body (prom_debug). Fix the following warning, treated as error with W=1: arch/powerpc/kernel/prom_init.c:656:46: error: suggest braces around empty body in an ‘if’ statement [-Werror=empty-body] Suggested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc/sparse: Fix plain integer as NULL pointer warningMathieu Malaterre
Trivial fix to remove the following sparse warnings: arch/powerpc/kernel/module_32.c:112:74: warning: Using plain integer as NULL pointer arch/powerpc/kernel/module_32.c:117:74: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1155:28: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1230:20: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1385:36: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1752:23: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2084:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2110:32: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2167:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2183:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:277:20: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:155:67: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:247:27: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:249:27: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:252:37: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:127:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:148:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:44:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:57:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:87:21: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:160:31: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:167:22: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:274:21: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:285:31: warning: Using plain integer as NULL pointer arch/powerpc/include/asm/hugetlb.h:204:16: warning: Using plain integer as NULL pointer arch/powerpc/mm/ppc_mmu_32.c:170:21: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/pci.c:1227:23: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/pci.c:65:24: warning: Using plain integer as NULL pointer Also use `--fix` command line option from `script/checkpatch --strict` to remove the following: CHECK: Comparison to NULL could be written "!dispDeviceBase" #72: FILE: arch/powerpc/kernel/btext.c:160: + if (dispDeviceBase == NULL) CHECK: Comparison to NULL could be written "!vbase" #80: FILE: arch/powerpc/kernel/btext.c:167: + if (vbase == NULL) CHECK: Comparison to NULL could be written "!base" #89: FILE: arch/powerpc/kernel/btext.c:274: + if (base == NULL) CHECK: Comparison to NULL could be written "!dispDeviceBase" #98: FILE: arch/powerpc/kernel/btext.c:285: + if (dispDeviceBase == NULL) CHECK: Comparison to NULL could be written "strstr" #117: FILE: arch/powerpc/kernel/module_32.c:117: + if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != NULL) CHECK: Comparison to NULL could be written "!Hash" #130: FILE: arch/powerpc/mm/ppc_mmu_32.c:170: + if (Hash == NULL) CHECK: Comparison to NULL could be written "Hash" #143: FILE: arch/powerpc/mm/tlb_hash32.c:44: + if (Hash != NULL) { CHECK: Comparison to NULL could be written "!Hash" #152: FILE: arch/powerpc/mm/tlb_hash32.c:57: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" #161: FILE: arch/powerpc/mm/tlb_hash32.c:87: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" #170: FILE: arch/powerpc/mm/tlb_hash32.c:127: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" #179: FILE: arch/powerpc/mm/tlb_hash32.c:148: + if (Hash == NULL) { ERROR: space required after that ';' (ctx:VxV) #192: FILE: arch/powerpc/platforms/powermac/pci.c:65: + for (; node != NULL;node = node->sibling) { CHECK: Comparison to NULL could be written "node" #192: FILE: arch/powerpc/platforms/powermac/pci.c:65: + for (; node != NULL;node = node->sibling) { CHECK: Comparison to NULL could be written "!region" #201: FILE: arch/powerpc/platforms/powermac/pci.c:1227: + if (region == NULL) CHECK: Comparison to NULL could be written "of_get_property" #214: FILE: arch/powerpc/platforms/powermac/setup.c:155: + if (of_get_property(np, "cache-unified", NULL) != NULL && dc) { CHECK: Comparison to NULL could be written "!np" #223: FILE: arch/powerpc/platforms/powermac/setup.c:247: + if (np == NULL) CHECK: Comparison to NULL could be written "np" #226: FILE: arch/powerpc/platforms/powermac/setup.c:249: + if (np != NULL) { CHECK: Comparison to NULL could be written "l2cr" #230: FILE: arch/powerpc/platforms/powermac/setup.c:252: + if (l2cr != NULL) { CHECK: Comparison to NULL could be written "via" #243: FILE: drivers/macintosh/via-pmu.c:277: + if (via != NULL) CHECK: Comparison to NULL could be written "current_req" #252: FILE: drivers/macintosh/via-pmu.c:1155: + if (current_req != NULL) { CHECK: Comparison to NULL could be written "!req" #261: FILE: drivers/macintosh/via-pmu.c:1230: + if (req == NULL || pmu_state != idle CHECK: Comparison to NULL could be written "!req" #270: FILE: drivers/macintosh/via-pmu.c:1385: + if (req == NULL) { CHECK: Comparison to NULL could be written "!pp" #288: FILE: drivers/macintosh/via-pmu.c:2084: + if (pp == NULL) CHECK: Comparison to NULL could be written "!pp" #297: FILE: drivers/macintosh/via-pmu.c:2110: + if (count < 1 || pp == NULL) CHECK: Comparison to NULL could be written "!pp" #306: FILE: drivers/macintosh/via-pmu.c:2167: + if (pp == NULL) CHECK: Comparison to NULL could be written "pp" #315: FILE: drivers/macintosh/via-pmu.c:2183: + if (pp != NULL) { Link: https://github.com/linuxppc/linux/issues/37 Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc: Add __printf verification to prom_printfMathieu Malaterre
__printf is useful to verify format and arguments. Fix arg mismatch reported by gcc, remove the following warnings (with W=1): arch/powerpc/kernel/prom_init.c:1467:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1471:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1504:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1505:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1506:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1507:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1508:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1509:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1975:39: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ arch/powerpc/kernel/prom_init.c:1986:27: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2567:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2567:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2569:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2569:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’ The patch also include arg mismatch fix for case with #define DEBUG_PROM (warning not listed here). This patch fix also the following warnings revealed by checkpatch: WARNING: Prefer using '"%s...", __func__' to using 'alloc_up', this function's name, in a string #101: FILE: arch/powerpc/kernel/prom_init.c:1235: + prom_debug("alloc_up(%lx, %lx)\n", size, align); and WARNING: Prefer using '"%s...", __func__' to using 'alloc_down', this function's name, in a string #138: FILE: arch/powerpc/kernel/prom_init.c:1278: + prom_debug("alloc_down(%lx, %lx, %s)\n", size, align, Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc/8xx: fix invalid register expression in head_8xx.SChristophe Leroy
New binutils generate the following warning AS arch/powerpc/kernel/head_8xx.o arch/powerpc/kernel/head_8xx.S: Assembler messages: arch/powerpc/kernel/head_8xx.S:916: Warning: invalid register expression This patch fixes it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-24powerpc: Export tm_enable()/tm_disable/tm_abort() APIsSimon Guo
This patch exports tm_enable()/tm_disable/tm_abort() APIs, which will be used for PR KVM transactional memory logic. Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Reviewed-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-24powerpc: Export msr_check_and_set() to modulesSimon Guo
PR KVM will need to reuse msr_check_and_set(). This patch exports this API for reuse. Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Reviewed-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-21powerpc/64s: Add support for a store forwarding barrier at kernel entry/exitNicholas Piggin
On some CPUs we can prevent a vulnerability related to store-to-load forwarding by preventing store forwarding between privilege domains, by inserting a barrier in kernel entry and exit paths. This is known to be the case on at least Power7, Power8 and Power9 powerpc CPUs. Barriers must be inserted generally before the first load after moving to a higher privilege, and after the last store before moving to a lower privilege, HV and PR privilege transitions must be protected. Barriers are added as patch sections, with all kernel/hypervisor entry points patched, and the exit points to lower privilge levels patched similarly to the RFI flush patching. Firmware advertisement is not implemented yet, so CPU flush types are hard coded. Thanks to Michal Suchánek for bug fixes and review. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michal Suchánek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-21powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREGMichael Neuling
In commit e2a800beaca1 ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") we fixed setting the DAWR end point to its max value via PPC_PTRACE_SETHWDEBUG. Unfortunately we broke PTRACE_SET_DEBUGREG when setting a 512 byte aligned breakpoint. PTRACE_SET_DEBUGREG currently sets the length of the breakpoint to zero (memset() in hw_breakpoint_init()). This worked with arch_validate_hwbkpt_settings() before the above patch was applied but is now broken if the breakpoint is 512byte aligned. This sets the length of the breakpoint to 8 bytes when using PTRACE_SET_DEBUGREG. Fixes: e2a800beaca1 ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-21powerpc/ptrace: Fix enforcement of DAWR constraintsMichael Neuling
Back when we first introduced the DAWR, in commit 4ae7ebe9522a ("powerpc: Change hardware breakpoint to allow longer ranges"), we screwed up the constraint making it a 1024 byte boundary rather than a 512. This makes the check overly permissive. Fortunately GDB is the only real user and it always did they right thing, so we never noticed. This fixes the constraint to 512 bytes. Fixes: 4ae7ebe9522a ("powerpc: Change hardware breakpoint to allow longer ranges") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-18powerpc/rtas: Fix spelling mistake "Discharching" -> "Discharging"Colin Ian King
Trivial fix to spelling mistake in battery_charging array. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-18powerpc/64s: Clear PCR on bootMichael Neuling
Clear the PCR (Processor Compatibility Register) on boot to ensure we are not running in a compatibility mode. We've seen this cause problems when a crash (and kdump) occurs while running compat mode guests. The kdump kernel then runs with the PCR set and causes problems. The symptom in the kdump kernel (also seen in petitboot after fast-reboot) is early userspace programs taking sigills on newer instructions (seen in libc). Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-30 03:01:29 +0000