summaryrefslogtreecommitdiffstats
path: root/arch/nds32/kernel
AgeCommit message (Collapse)Author
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-08-29nds32: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: allmodconfig nds32): include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/nds32/kernel/signal.c:362:20: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/nds32/kernel/signal.c:315:7: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-29dma-mapping: make dma_atomic_pool_init self-containedChristoph Hellwig
The memory allocated for the atomic pool needs to have the same mapping attributes that we use for remapping, so use pgprot_dmacoherent instead of open coding it. Also deduct a suitable zone to allocate the memory from based on the presence of the DMA zones. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-12Merge tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - move the USB special case that bounced DMA through a device bar into the USB code instead of handling it in the common DMA code (Laurentiu Tudor and Fredrik Noring) - don't dip into the global CMA pool for single page allocations (Nicolin Chen) - fix a crash when allocating memory for the atomic pool failed during boot (Florian Fainelli) - move support for MIPS-style uncached segments to the common code and use that for MIPS and nios2 (me) - make support for DMA_ATTR_NON_CONSISTENT and DMA_ATTR_NO_KERNEL_MAPPING generic (me) - convert nds32 to the generic remapping allocator (me) * tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping: (29 commits) dma-mapping: mark dma_alloc_need_uncached as __always_inline MIPS: only select ARCH_HAS_UNCACHED_SEGMENT for non-coherent platforms usb: host: Fix excessive alignment restriction for local memory allocations lib/genalloc.c: Add algorithm, align and zeroed family of DMA allocators nios2: use the generic uncached segment support in dma-direct nds32: use the generic remapping allocator for coherent DMA allocations arc: use the generic remapping allocator for coherent DMA allocations dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code dma-mapping: add a dma_alloc_need_uncached helper openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support arc: remove the partial DMA_ATTR_NON_CONSISTENT support arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT support ARM: dma-mapping: allow larger DMA mask than supported dma-mapping: truncate dma masks to what dma_addr_t can hold iommu/dma: Apply dma_{alloc,free}_contiguous functions dma-remap: Avoid de-referencing NULL atomic_pool MIPS: use the generic uncached segment support in dma-direct dma-direct: provide generic support for uncached kernel segments au1100fb: fix DMA API abuse ...
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-06-25nds32: use the generic remapping allocator for coherent DMA allocationsChristoph Hellwig
Replace the code that sets up uncached PTEs with the generic vmap based remapping code. It also provides an atomic pool for allocations from non-blocking context, which we not properly supported by the existing nds32 code. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Greentime Hu <greentime@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com>
2019-06-03Merge tag 'nds32-for-linux-5.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 fixes from Greentime Hu: - fix warning for math-emu - fix nds32 fpu exception handling - fix nds32 fpu emulation implementation * tag 'nds32-for-linux-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: nds32: add new emulations for floating point instruction nds32: Avoid IEX status being incorrectly modified math-emu: Use statement expressions to fix Wshift-count-overflow warning
2019-05-31nds32: Avoid IEX status being incorrectly modifiedVincent Chen
In order for kernel to capture each denormalized output, the UDF trapping enable bit is always raised in $fpcsr. Because underflow case will issue not an underflow exception but also an inexact exception, it causes that the IEX, IEX cumulative exception, flag in $fpcsr to be raised in each denormalized output handling. To make the emulation transparent to the user, the emulator needs to clear the IEX flag in $fpcsr if the result is a denormalized number. However, if the IEX flag has been raised before this floating point emulation, this cleanup may be incorrect. To avoid the IEX flags in $fpcsr be raised in each denormalized output handling, the IEX trap shall be always enabled. Signed-off-by: Vincent Chen <vincentc@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2019-05-29signal: Remove the task parameter from force_sig_faultEric W. Biederman
As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29signal: Explicitly call force_sig_fault on currentEric W. Biederman
Update the calls of force_sig_fault that pass in a variable that is set to current earlier to explicitly use current. This is to make the next change that removes the task parameter from force_sig_fault easier to verify. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29signal/nds32: Remove tsk parameter from send_sigtrapEric W. Biederman
The send_sigtrap function is always called with tsk == current. Make that obvious by removing the tsk parameter. This also makes it clear that send_sigtrap always calls force_sig_fault on the current task. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-27signal: Remove task parameter from force_sigEric W. Biederman
All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-17Merge tag 'nds32-for-linus-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 updates from Greentime Hu: - Clean up codes and Makefile - Fix a vDSO bug - Remove useless functions/header files - Update git repo path in MAINTAINERS * tag 'nds32-for-linus-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: nds32: Fix vDSO clock_getres() MAINTAINERS: update nds32 git repo path nds32: don't export low-level cache flushing routines arch: nds32: Kconfig: pedantic formatting nds32: fix semicolon code style issue nds32: vdso: drop unnecessary cc-ldoption nds32: remove unused generic-y += cmpxchg-local.h nds32: Use the correct style for SPDX License Identifier nds32: remove __virt_to_bus and __bus_to_virt nds32: vdso: fix and clean-up Makefile nds32: add vmlinux.lds and vdso.so to .gitignore nds32: ex-exit: Remove unneeded need_resched() loop nds32/io: Remove useless definition of mmiowb() nds32: Removed unused thread flag TIF_USEDFPU
2019-05-16nds32: Fix vDSO clock_getres()Vincenzo Frascino
clock_getres in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; and hrtimer_resolution depends on the enablement of the high resolution timers that can happen either at compile or at run time. Fix the nds32 vdso implementation of clock_getres keeping a copy of hrtimer_resolution in vdso data and using that directly. Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2019-05-16nds32: don't export low-level cache flushing routinesChristoph Hellwig
None of these is used by modules. Nor should they as we have better highlevel primitives. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2019-05-15Merge tag 'trace-v5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The major changes in this tracing update includes: - Removal of non-DYNAMIC_FTRACE from 32bit x86 - Removal of mcount support from x86 - Emulating a call from int3 on x86_64, fixes live kernel patching - Consolidated Tracing Error logs file Minor updates: - Removal of klp_check_compiler_support() - kdb ftrace dumping output changes - Accessing and creating ftrace instances from inside the kernel - Clean up of #define if macro - Introduction of TRACE_EVENT_NOP() to disable trace events based on config options And other minor fixes and clean ups" * tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) x86: Hide the int3_emulate_call/jmp functions from UML livepatch: Remove klp_check_compiler_support() ftrace/x86: Remove mcount support ftrace/x86_32: Remove support for non DYNAMIC_FTRACE tracing: Simplify "if" macro code tracing: Fix documentation about disabling options using trace_options tracing: Replace kzalloc with kcalloc tracing: Fix partial reading of trace event's id file tracing: Allow RCU to run between postponed startup tests tracing: Fix white space issues in parse_pred() function tracing: Eliminate const char[] auto variables ring-buffer: Fix mispelling of Calculate tracing: probeevent: Fix to make the type of $comm string tracing: probeevent: Do not accumulate on ret variable tracing: uprobes: Re-enable $comm support for uprobe events ftrace/x86_64: Emulate call function while updating in breakpoint handler x86_64: Allow breakpoints to emulate call instructions x86_64: Add gap to int3 to allow for call emulation tracing: kdb: Allow ftdump to skip all but the last few entries tracing: Add trace_total_entries() / trace_total_entries_cpu() ...
2019-05-14treewide: replace #include <asm/sizes.h> with #include <linux/sizes.h>Masahiro Yamada
Since commit dccd2304cc90 ("ARM: 7430/1: sizes.h: move from asm-generic to <linux/sizes.h>"), <asm/sizes.h> and <asm-generic/sizes.h> are just wrappers of <linux/sizes.h>. This commit replaces all <asm/sizes.h> and <asm-generic/sizes.h> to prepare for the removal. Link: http://lkml.kernel.org/r/1553267665-27228-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-07nds32: fix semicolon code style issueYang Wei
Delete superfluous semicolons. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2019-05-07nds32: vdso: drop unnecessary cc-ldoptionNick Desaulniers
Towards the goal of removing cc-ldoption, it seems that --hash-style= was added to binutils 2.17.50.0.2 in 2006. The minimal required version of binutils for the kernel according to Documentation/process/changes.rst is 2.20. Link: https://gcc.gnu.org/ml/gcc/2007-01/msg01141.html Cc: clang-built-linux@googlegroups.com Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2019-05-07nds32: vdso: fix and clean-up MakefileMasahiro Yamada
- $(call if_changed,...) must have FORCE as a prerequisite - vdso.lds is a generated file, so it should be prefixed with $(obj)/ instead of $(src)/. - cmd_vdsosym is a one-liner rule, so the assignment with '=' is simpler. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2019-05-07nds32: add vmlinux.lds and vdso.so to .gitignoreMasahiro Yamada
These are build artifacts, which should be ignored by git. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2019-05-07nds32: ex-exit: Remove unneeded need_resched() loopValentin Schneider
Since the enabling and disabling of IRQs within preempt_schedule_irq() is contained in a need_resched() loop, we don't need the outer arch code loop. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2019-04-29function_graph: Place ftrace_graph_entry_stub() prototype in ↵Steven Rostedt (VMware)
include/linux/ftrace.h ftrace_graph_entry_stub() is defined in generic code, its prototype should be in the generic header and not defined throughout architecture specific code in order to use it. Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-04get rid of legacy 'get_ds()' functionLinus Torvalds
Every in-kernel use of this function defined it to KERNEL_DS (either as an actual define, or as an inline function). It's an entirely historical artifact, and long long long ago used to actually read the segment selector valueof '%ds' on x86. Which in the kernel is always KERNEL_DS. Inspired by a patch from Jann Horn that just did this for a very small subset of users (the ones in fs/), along with Al who suggested a script. I then just took it to the logical extreme and removed all the remaining gunk. Roughly scripted with git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/' git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d' plus manual fixups to remove a few unusual usage patterns, the couple of inline function cases and to fix up a comment that had become stale. The 'get_ds()' function remains in an x86 kvm selftest, since in user space it actually does something relevant. Inspired-by: Jann Horn <jannh@google.com> Inspired-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-29Merge tag 'nds32-for-linus-4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 updates from Greentime Hu: - Perf support - Power management support - FPU support - Hardware prefetcher support - Build error fixed - Performance enhancement * tag 'nds32-for-linus-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: nds32: support hardware prefetcher nds32: Fix the items of hwcap_str ordering issue. math-emu/soft-fp.h: (_FP_ROUND_ZERO) cast 0 to void to fix warning math-emu/op-2.h: Use statement expressions to prevent negative constant shift nds32: support denormalized result through FP emulator nds32: Support FP emulation nds32: nds32 FPU port nds32: Remove duplicated include from pm.c nds32: Power management for nds32 nds32: Add document for NDS32 PMU. nds32: Add perf call-graph support. nds32: Perf porting nds32: Fix bug in bitfield.h nds32: Fix gcc 8.0 compiler option incompatible. nds32: Fill all TLB entries with kernel image mapping nds32: Remove the redundant assignment
2018-11-27nds32: function_graph: Simplify with function_graph_enter()Steven Rostedt (VMware)
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have nds32 use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Cc: Greentime Hu <greentime@andestech.com> Cc: stable@kernel.org Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-22nds32: support hardware prefetcherNylon Chen
We add a config for user to enable or disable this feature. It can be used to control the hardware prefetch function. Signed-off-by: Nylon Chen <nylon7@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-11-22nds32: Fix the items of hwcap_str ordering issue.Nylon Chen
The hwcap_str should be set in a correct order according to HWCAP_xx. We also add the missing "fpu_dp" to it. Signed-off-by: Nylon Chen <nylon7@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-11-22nds32: support denormalized result through FP emulatorVincent Chen
Currently, the nds32 FPU dose not support the arithmetic of denormalized number. When the nds32 FPU finds the result of the instruction is a denormlized number, the nds32 FPU considers it to be an underflow condition and rounds the result to an appropriate number. It may causes some loss of precision. This commit proposes a solution to re-execute the instruction by the FPU emulator to enhance the precision. To transfer calculations from user space to kernel space, this feature will enable the underflow exception trap by default. Enabling this feature may cause some side effects: 1. Performance loss due to extra FPU exception 2. Need another scheme to control real underflow trap A new parameter, UDF_trap, which is belong to FPU context is used to control underflow trap. User can configure this feature via CONFIG_SUPPORT_DENORMAL_ARITHMETIC Signed-off-by: Vincent Chen <vincentc@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-11-22nds32: Support FP emulationVincent Chen
The Andes FPU coprocessor does not support denormalized number handling. According to the specification, FPU generates a denorm input exception that requires the kernel to deal with this instrution operation when it encounters denormalized operands. Hence an nds32 FPU ISA emulator in the kernel is required to meet requirement. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Nickhu <nickhu@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-11-22nds32: nds32 FPU portVincent Chen
This patch set contains basic components for supporting the nds32 FPU, such as exception handlers and context switch for FPU registers. By default, the lazy FPU scheme is supported and the user can configure it via CONFIG_LZAY_FPU. Signed-off-by: Vincent Chen <vincentc@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-11-06nds32: Remove duplicated include from pm.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-11-06nds32: Power management for nds32Nick Hu
There are three sleep states in nds32: suspend to idle, suspend to standby, suspend to ram In suspend to ram, we use the 'standby' instruction to emulate power management device to hang the system util wakeup source send wakeup events to break the loop. First, we push the general purpose registers and system registers to stack. Second, we translate stack pointer to physical address and store to memory to save the stack pointer. Third, after write back and invalid the cache we hang in 'standby' intruction. When wakeup source trigger wake up events, the loop will be break and resume the system. Signed-off-by: Nick Hu <nickhu@andestech.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-11-06nds32: Add perf call-graph support.Nickhu
The perf call-graph option can trace the callchain between functions. This commit add the perf callchain for nds32. There are kerenl callchain and user callchain. The kerenl callchain can trace the function in kernel space. There are two type for user callchain. One for the 'optimize for size' config is set, and another one for the config is not set. The difference between two types is that the index of frame-pointer in user stack is not the same. For example: With optimize for size: User Stack: --------- | lp | --------- | gp | --------- | fp | Without optimize for size: User Stack: 1. non-leaf function: --------- | lp | --------- | fp | 2. leaf function: --------- | fp | Signed-off-by: Nickhu <nickhu@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-11-06nds32: Perf portingNickhu
This is the commit that porting the perf for nds32. 1.Raw event: The raw events start with 'r'. Usage: perf stat -e rXYZ ./app X: the index of performance counter. YZ: the index(convert to hexdecimal) of events Example: 'perf stat -e r101 ./app' means the counter 1 will count the instruction event. The index of counter and events can be found in "Andes System Privilege Architecture Version 3 Manual". Or you can perform the 'perf list' to find the symbolic name of raw events. 2.Perf mmap2: Fix unexpected perf mmap2() page fault When the mmap2() called by perf application, you will encounter such condition:"failed to write." With return value -EFAULT This is due to the page fault caused by "reading" buffer from the mapped legal address region to write to the descriptor. The page_fault handler will get a VM_FAULT_SIGBUS return value, which should not happens here.(Due to this is a read request.) You can refer to kernel/events/core.c:perf_mmap_fault(...) If "(vmf->pgoff && (vmf->flags & FAULT_FLAG_WRITE))" is evaluated as true, you will get VM_FAULT_SIGBUS as return value. However, this is not an write request. The flags which indicated why the page fault happens is wrong. Furthermore, NDS32 SPAv3 is not able to detect it is read or write. It only know either it is instruction fetch or data access. Therefore, by removing the wrong flag assignment(actually, the hardware is not able to show the reason), we can fix this bug. 3.Perf multiple events map to same counter. When there are multiple events map to the same counter, the counter counts inaccurately. This is because each counter only counts one event in the same time. So when there are multiple events map to same counter, they have to take turns in each context. There are two solution: 1. Print the error message when multiple events map to the same counter. But print the error message would let the program hang in loop. The ltp (linux test program) would be failed when the program hang in loop. 2. Don't print the error message, the ltp would pass. But the user need to have the knowledge that don't count the events which map to the same counter, or the user will get the inaccurate results. We choose method 2 for the solution Signed-off-by: Nickhu <nickhu@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-11-06nds32: Fill all TLB entries with kernel image mappingZong Li
We use earlycon replace with early_printk and doesn't use early_io_map() to create UART mapping. It is not necessary to reserve the one way in TLB for now. It didn't make sense if use direct-mapped and reserve one way at the same time. It allow the direct-mapped now. Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-11-06nds32: Remove the redundant assignmentZong Li
For early version, the value of r2 register was used to display a character on UART when error occurred. Remove these r2 assignments because we no longer show the character. Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-09-05nds32: linker script: GCOV kernel may refers data in __exitGreentime Hu
This patch is used to fix nds32 allmodconfig/allyesconfig build error because GCOV kernel embeds counters in the kernel for each line and a part of that embed in __exit text. So we need to keep the EXIT_TEXT and EXIT_DATA if CONFIG_GCOV_KERNEL=y. Link: https://lkml.org/lkml/2018/9/1/125 Signed-off-by: Greentime Hu <greentime@andestech.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
2018-09-04nds32: Fix a kernel panic issue because of wrong frame pointer access.Greentime Hu
It can make sure that trace_hardirqs_off/trace_hardirqs_on can get a correct return address by frame pointer through __builtin_return_address() in this fix. Unable to handle kernel paging request at virtual address fffffffc pgd = 3c42e9cf [fffffffc] *pgd=02a9c000 Internal error: Oops: 1 [#1] Modules linked in: CPU: 0 PC is at trace_hardirqs_off+0x78/0xec LP is at common_exception_handler+0xda/0xf4 pc : [<b23ea5a4>] lp : [<b2352eba>] Tainted: G W sp : ada60ab0 fp : efcaff48 gp : 3a020490 r25: efcb0000 r24: 00000000 r23: 00000000 r22: 00000000 r21: 00000000 r20: 000700c1 r19: 000700ca r18: 3a21b018 r17: 00000001 r16: 00000002 r15: 00000001 r14: 0000002a r13: 3a00a804 r12: ada60ab0 r11: 3a113af8 r10: 3a01c530 r9 : 3a124404 r8 : 00120f9c r7 : b2352eba r6 : 00000000 r5 : 3a126b58 r4 : 00000000 r3 : 3a1726a8 r2 : b2921000 r1 : 00000000 r0 : 00000000 IRQs off Segment user Process init (pid: 1, stack limit = 0x069d7f15) Stack: (0xada60ab0 to 0xada61000) Stack: 0aa0: 00000000 00000003 3a110000 0011f000 Stack: 0ac0: 00000005 00000000 00000000 00000000 ada60b10 3a01fe68 ada60b0c ada60b08 Stack: 0ae0: 00000000 ada60ab8 ada60b30 3a020550 00000000 00000001 3a11c2f8 3a01c6e8 Stack: 0b00: 3a01cb80 fffffba8 3a113af8 3a21b018 3a122c28 00003ec4 00000165 00000000 Stack: 0b20: 3a126aec 0000006c 00000000 00000001 3a01fe68 00000000 00000003 00000000 Stack: 0b40: 00000001 000003f8 3a020930 3a01c530 00000008 ada60c18 3a020490 3a003120 Stack: 0b60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0b80: 00000000 00000000 00000000 00000000 ffff8000 00000000 00000000 00000000 Stack: 0ba0: 00000000 00000001 3a020550 00000000 3a01d020 00000000 fffff000 fffff000 Stack: 0bc0: 00000000 00000000 00000000 00000000 ada60f2c 00000000 00000001 00000000 Stack: 0be0: 00000000 00000000 3a01fe68 fffffab0 00008034 00000008 3a0010cc 3a01fe68 Stack: 0c00: 00000000 00000000 00000001 ada60c88 3a020490 3a0139d4 0009dc6f 00000000 Stack: 0c20: 00000000 00000000 ada60fce fffff000 00000000 0000ebe0 3a020038 3a020550 Stack: 0c40: ada60f20 ada60c90 3a0007f0 3a0002a8 ada60c8c 00000000 00000000 ada60c88 Stack: 0c60: 3a020490 3a004570 00000000 00000000 ada60f20 3a0007f0 3a000000 00000000 Stack: 0c80: 3a020490 3a004850 00000000 3a013f24 3a000000 00000000 3a01ff44 00000000 Stack: 0ca0: 00000000 00000000 00000000 00000000 00000000 00000000 3a01ff84 3a01ff7c Stack: 0cc0: 3a01ff4c 3a01ff5c 3a01ff64 3a01ff9c 3a01ffa4 3a01ffac 3a01ff6c 3a01ff74 Stack: 0ce0: 00000000 00000000 3a01ff44 00000000 00000000 00000000 00000000 00000000 Stack: 0d00: 3a01ff8c 00000000 00000000 3a01ff94 00000000 00000000 00000000 00000000 Stack: 0d20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0d40: 3a01ffbc 3a01ffb4 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0d60: 00000000 00000000 00000000 00000000 00000000 3a01ffc4 00000000 00000000 Stack: 0d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0dc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3a01ff54 Stack: 0de0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0e00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0e20: 00000000 00000004 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0e60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0e80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0ec0: 00000000 00000000 00000000 00000000 ffffffff 00000000 00000000 00000000 Stack: 0ee0: 00000000 00000000 00000000 00000000 ada60f20 00000000 00000000 00000000 Stack: 0f00: 00000000 00000000 00000000 00000000 00000000 00000000 3a020490 3a000b24 Stack: 0f20: 00000001 ada60fde 00000000 ada60fe4 ada60feb 00000000 00000021 3a038000 Stack: 0f40: 00000010 0009dc6f 00000006 00001000 00000011 00000064 00000003 00008034 Stack: 0f60: 00000004 00000020 00000005 00000008 00000007 3a000000 00000008 00000000 Stack: 0f80: 00000009 0000ebe0 0000000b 00000000 0000000c 00000000 0000000d 00000000 Stack: 0fa0: 0000000e 00000000 00000017 00000000 00000019 ada60fce 0000001f ada60ff6 Stack: 0fc0: 00000000 00000000 00000000 b5010000 fa839914 23b5dd89 a2aea540 692fc82e Stack: 0fe0: 0074696e 454d4f48 54002f3d 3d4d5245 756e696c 692f0078 0074696e 00000000 CPU: 0 PID: 1 Comm: init Tainted: G W 4.18.0-00015-g1888b64a2558-dirty #112 Hardware name: andestech,ae3xx (DT) Call Trace: [<b27a8e34>] dump_stack+0x2c/0x38 [<b2354874>] die+0x128/0x18c [<b2356f4c>] do_page_fault+0x3b8/0x4e0 [<b2352ed4>] ret_from_exception+0x0/0x10 [<b2352eba>] common_exception_handler+0xda/0xf4 Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-09-04nds32: Only print one page of stack when die to prevent printing too much ↵Greentime Hu
information. It may print too much information sometimes if the stack is wrong or too big. This patch can limit the debug information in a page of stack. Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-09-04nds32: Add macro definition for offset of lp register on stackZong Li
Use macro to replace the magic number. Signed-off-by: Zong Li <zong@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-09-04nds32: Remove the deprecated ABI implementationZong Li
We are not using NDS32 ABI 2 for now, just remove the preprocessor directives __NDS32_ABI_2. Signed-off-by: Zong Li <zong@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-09-04nds32/stack: Get real return address by using ftrace_graph_ret_addrZong Li
Function graph tracer has modified the return address to 'return_to_handler' on stack, and provide the 'ftrace_graph_ret_addr' to get the real return address. Signed-off-by: Zong Li <zong@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-09-04nds32/ftrace: Support dynamic function graph tracerZong Li
This patch contains the implementation of dynamic function graph tracer. Signed-off-by: Zong Li <zong@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-09-04nds32/ftrace: Support dynamic function tracerZong Li
This patch contains the implementation of dynamic function tracer. The mcount call is composed of three instructions, so there are three nop for enough placeholder. Signed-off-by: Zong Li <zong@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-09-04nds32/ftrace: Support static function graph tracerZong Li
This patch contains implementation of static function graph tracer. Signed-off-by: Zong Li <zong@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-09-04nds32/ftrace: Support static function tracerZong Li
This patch support the static function tracer. On nds32 ABI, we need to always push return address to stack for __builtin_return_address can work correctly, otherwise, it will get the wrong value of $lp at leaf function. Signed-off-by: Zong Li <zong@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-25 00:04:17 +0000