aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/kernel/hibernate-asm.S
AgeCommit message (Collapse)Author
2019-08-09arm64: mm: Logic to make offset_ttbr1 conditionalSteve Capper
When running with a 52-bit userspace VA and a 48-bit kernel VA we offset ttbr1_el1 to allow the kernel pagetables with a 52-bit PTRS_PER_PGD to be used for both userspace and kernel. Moving on to a 52-bit kernel VA we no longer require this offset to ttbr1_el1 should we be running on a system with HW support for 52-bit VAs. This patch introduces conditional logic to offset_ttbr1 to query SYS_ID_AA64MMFR2_EL1 whenever 52-bit VAs are selected. If there is HW support for 52-bit VAs then the ttbr1 offset is skipped. We choose to read a system register rather than vabits_actual because offset_ttbr1 can be called in places where the kernel data is not actually mapped. Calls to offset_ttbr1 appear to be made from rarely called code paths so this extra logic is not expected to adversely affect performance. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-10arm64: mm: Offset TTBR1 to allow 52-bit PTRS_PER_PGDSteve Capper
Enabling 52-bit VAs on arm64 requires that the PGD table expands from 64 entries (for the 48-bit case) to 1024 entries. This quantity, PTRS_PER_PGD is used as follows to compute which PGD entry corresponds to a given virtual address, addr: pgd_index(addr) -> (addr >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1) Userspace addresses are prefixed by 0's, so for a 48-bit userspace address, uva, the following is true: (uva >> PGDIR_SHIFT) & (1024 - 1) == (uva >> PGDIR_SHIFT) & (64 - 1) In other words, a 48-bit userspace address will have the same pgd_index when using PTRS_PER_PGD = 64 and 1024. Kernel addresses are prefixed by 1's so, given a 48-bit kernel address, kva, we have the following inequality: (kva >> PGDIR_SHIFT) & (1024 - 1) != (kva >> PGDIR_SHIFT) & (64 - 1) In other words a 48-bit kernel virtual address will have a different pgd_index when using PTRS_PER_PGD = 64 and 1024. If, however, we note that: kva = 0xFFFF << 48 + lower (where lower[63:48] == 0b) and, PGDIR_SHIFT = 42 (as we are dealing with 64KB PAGE_SIZE) We can consider: (kva >> PGDIR_SHIFT) & (1024 - 1) - (kva >> PGDIR_SHIFT) & (64 - 1) = (0xFFFF << 6) & 0x3FF - (0xFFFF << 6) & 0x3F // "lower" cancels out = 0x3C0 In other words, one can switch PTRS_PER_PGD to the 52-bit value globally provided that they increment ttbr1_el1 by 0x3C0 * 8 = 0x1E00 bytes when running with 48-bit kernel VAs (TCR_EL1.T1SZ = 16). For kernel configuration where 52-bit userspace VAs are possible, this patch offsets ttbr1_el1 and sets PTRS_PER_PGD corresponding to the 52-bit value. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Steve Capper <steve.capper@arm.com> [will: added comment to TTBR1_BADDR_4852_OFFSET calculation] Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-06arm64: assembler: Change order of macro arguments in phys_to_ttbrWill Deacon
Since AArch64 assembly instructions take the destination register as their first operand, do the same thing for the phys_to_ttbr macro. Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-12-22arm64: handle 52-bit addresses in TTBRKristina Martsenko
The top 4 bits of a 52-bit physical address are positioned at bits 2..5 in the TTBR registers. Introduce a couple of macros to move the bits there, and change all TTBR writers to use them. Leave TTBR0 PAN code unchanged, to avoid complicating it. A system with 52-bit PA will have PAN anyway (because it's ARMv8.1 or later), and a system without 52-bit PA can only use up to 48-bit PAs. A later patch in this series will add a kconfig dependency to ensure PAN is configured. In addition, when using 52-bit PA there is a special alignment requirement on the top-level table. We don't currently have any VA_BITS configuration that would violate the requirement, but one could be added in the future, so add a compile-time BUG_ON to check for it. Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> [catalin.marinas@arm.com: added TTBR_BADD_MASK_52 comment] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-09arm64: Introduce raw_{d,i}cache_line_sizeSuzuki K Poulose
On systems with mismatched i/d cache min line sizes, we need to use the smallest size possible across all CPUs. This will be done by fetching the system wide safe value from CPU feature infrastructure. However the some special users(e.g kexec, hibernate) would need the line size on the CPU (rather than the system wide), when either the system wide feature may not be accessible or it is guranteed that the caller executes with a gurantee of no migration. Provide another helper which will fetch cache line size on the current CPU. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: James Morse <james.morse@arm.com> Reviewed-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-22arm64: hibernate: reduce TLB maintenance scopeMark Rutland
In break_before_make_ttbr_switch we perform broadcast TLB maintenance for the inner shareable domain, and use a DSB ISH to complete this. However, at the point we execute this, secondary CPUs are either physically offline, or executing code outside of the kernel. Upon entering the kernel, secondary CPUs will invalidate their TLBs before enabling their MMUs. Thus we do not need to invalidate TLBs of other CPUs, and as with idmap_cpu_replace_ttbr1 we can reduce the scope of maintenance to the TLBs of the local CPU. This keeps our TLB maintenance code consistent, and is a minor optimisation. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: James Morse <james.morse@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-28arm64: kernel: Add support for hibernate/suspend-to-diskJames Morse
Add support for hibernate/suspend-to-disk. Suspend borrows code from cpu_suspend() to write cpu state onto the stack, before calling swsusp_save() to save the memory image. Restore creates a set of temporary page tables, covering only the linear map, copies the restore code to a 'safe' page, then uses the copy to restore the memory image. The copied code executes in the lower half of the address space, and once complete, restores the original kernel's page tables. It then calls into cpu_resume(), and follows the normal cpu_suspend() path back into the suspend code. To restore a kernel using KASLR, the address of the page tables, and cpu_resume() are stored in the hibernate arch-header and the el2 vectors are pivotted via the 'safe' page in low memory. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Kevin Hilman <khilman@baylibre.com> # Tested on Juno R2 Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>