| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 8183bb7e291b7818f49ea39687c2fafa01a46e27 ]
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230707063335.13317-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ebceec271e552a2b05e47d8ef0597052b1a39449 upstream.
This patch fixes an issue affecting the Wifi/Bluetooth connectivity on
ROCK Pi 4 boards. Commit f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth
on ROCK Pi 4 boards") introduced a problem with the clock configuration.
Specifically, the clock-names property of the sdio-pwrseq node was not
updated to 'lpo', causing the driver to wait indefinitely for the wrong clock
signal 'ext_clock' instead of the expected one 'lpo'. This prevented the proper
initialization of Wifi/Bluetooth chip on ROCK Pi 4 boards.
To address this, this patch updates the clock-names property of the
sdio-pwrseq node to "lpo" to align with the changes made to the bluetooth node.
This patch has been tested on ROCK Pi 4B.
Fixes: f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards")
Cc: stable@vger.kernel.org
Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com>
Link: https://lore.kernel.org/r/ZLbATQRjOl09aLAp@zephyrusG14
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 78e869dd8b2ba19765ac9b05cdea3e432d1dc188 ]
Although the memory map of i.MX93 reference manual rev. 2 claims that
analog top has start address of 0x44480000 and end address of 0x4448ffff,
this overlaps with TMU memory area starting at 0x44482000, as stated in
section 73.6.1.
As PLL configuration registers start at addresses up to 0x44481400, as used
by clk-imx93, reduce the anatop size to 0x2000, so exclude the TMU area
but keep all PLL registers inside.
Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f02b53375e8f14b4c27a14f6e4fb6e89914fdc29 ]
The CSI1 PHY reference clock is limited to 125 MHz according to:
i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020
Table 5-1. Clock Root Table (continued) / page 307
Slice Index n = 123 .
Currently the IMX8MM_CLK_CSI1_PHY_REF clock is configured to be
fed directly from 1 GHz PLL2 , which overclocks them. Instead, drop
the configuration altogether, which defaults the clock to 24 MHz REF
clock input, which for the PHY reference clock is just fine.
Based on a patch from Marek Vasut for the imx8mn.
Fixes: e523b7c54c05 ("arm64: dts: imx8mm: Add CSI nodes")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2bd1d2dd808c60532283e9cf05110bf1bf2f9079 ]
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
[ 289.171014] mmc1: running CQE recovery
[ 290.048972] mmc1: running CQE recovery
[ 290.054834] mmc1: running CQE recovery
[ 290.060817] mmc1: running CQE recovery
[ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
[ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
[ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
[ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
[ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
[ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
[ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
[ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
[ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
[ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
[ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
[ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
Fixes: 246450344dad ("arm64: dts: rockchip: rk3399: Radxa ROCK 4C+")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230705144255.115299-3-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cee572756aa2cb46e959e9797ad4b730b78a050b ]
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
[ 289.171014] mmc1: running CQE recovery
[ 290.048972] mmc1: running CQE recovery
[ 290.054834] mmc1: running CQE recovery
[ 290.060817] mmc1: running CQE recovery
[ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
[ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
[ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
[ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
[ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
[ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
[ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
[ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
[ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
[ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
[ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
[ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
While we are here, set the eMMC maximum clock frequency to 1.5MHz to
follow the ROCK 4C+.
Fixes: 1b5715c602fd ("arm64: dts: rockchip: add ROCK Pi 4 DTS support")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-By: Folker Schwesinger <dev@folker-schwesinger.de>
Link: https://lore.kernel.org/r/20230705144255.115299-2-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 798f1df86e5709b7b6aedf493cc04c7fedbf544a ]
The commit 3a786086c6f8 ("arm64: dts: qcom: Add missing "-thermal"
suffix for thermal zones") renamed the thermal zone in the pm8150l.dtsi
file to comply with the schema. However this resulted in a clash with
the RB5 board file, which already contained the pm8150l-thermal zone for
the on-board sensor. This resulted in the board file definition
overriding the thermal zone defined in the PMIC include file (and thus
the on-die PMIC temp alarm was not probing at all).
Rename the thermal zone in qcom/qrb5165-rb5.dts to remove this override.
Fixes: 3a786086c6f8 ("arm64: dts: qcom: Add missing "-thermal" suffix for thermal zones")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230613131224.666668-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f34a2aa4c88f4882e3c5df8c9b78f8bbd3f564f ]
IPQ5332 has efuse region to determine the various HW quirks. Lets
add the initial support and the individual fuses will be added as they
are required.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-3-quic_kathirav@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit db66795f61354c373ecdadbdae1ed253a96c47cb upstream.
The correct dts property for the SCL falling time is
"i2c-scl-falling-time-ns".
Fixes: c8da1d15b8a4 ("arm64: dts: stratix10: i2c clock running out of spec")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b27bfc5103c72f84859bd32731b6a09eafdeda05 ]
Set VPU G2 clock to 300MHz like described in documentation.
This fixes pixels error occurring with large resolution ( >= 2560x1600)
HEVC test stream when using the postprocessor to produce NV12.
Fixes: 4ac7e4a81272 ("arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 253be5b53c2792fb4384f8005b05421e6f040ee3 ]
For SOMs with an onboard PHY, the RESET_N pull-up resistor is
currently deactivated in the pinmux configuration. When the pinmux
code selects the GPIO function for this pin, with a default direction
of input, this prevents the RESET_N pin from being taken to the proper
3.3V level (deasserted), and this results in the PHY being not
detected since it is held in reset.
Taken from RESET_N pin description in ADIN13000 datasheet:
This pin requires a 1K pull-up resistor to AVDD_3P3.
Activate the pull-up resistor to fix the issue.
Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module")
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ef0aa137a96c5f0564f2db0c556a4f0f60ce8f5 ]
Remove unused nINT_ETHPHY entry from gpio-line-names in gpio1 nodes of
phyCORE-i.MX8MM and phyBOARD-Polis-i.MX8MM devicetrees.
Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support")
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cddeefc1663294fb74b31ff5029a83c0e819ff3a ]
Corrected the label of the VPU regulator node (buck 3)
from reg_vdd_gpu to reg_vdd_vpu.
Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support")
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f7a0b57524cf811ac06257a5099f1b7c19ee7310 ]
The GW7904 does not connect the VDD_MIPI power rails thus MIPI is
disabled. However we must also disable disp_blk_ctrl as it uses the
pgc_mipi power domain and without it being disabled imx8m-blk-ctrl will
fail to probe:
imx8m-blk-ctrl 32e28000.blk-ctrl: error -ETIMEDOUT: failed to attach
power domain "mipi-dsi"
imx8m-blk-ctrl: probe of 32e28000.blk-ctrl failed with error -110
Fixes: b999bdaf0597 ("arm64: dts: imx: Add i.mx8mm Gateworks gw7904 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e7d3c5e13b05dda9db92d98803a626378e75438 ]
The GW7903 does not connect the VDD_MIPI power rails thus MIPI is
disabled. However we must also disable disp_blk_ctrl as it uses the
pgc_mipi power domain and without it being disabled imx8m-blk-ctrl will
fail to probe:
imx8m-blk-ctrl 32e28000.blk-ctrl: error -ETIMEDOUT: failed to attach power domain "mipi-dsi"
imx8m-blk-ctrl: probe of 32e28000.blk-ctrl failed with error -110
Fixes: a72ba91e5bc7 ("arm64: dts: imx: Add i.mx8mm Gateworks gw7903 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6bc829ceea4158c7aeb3a9e73d5c52634d78fb6f upstream.
The WKUP_PADCONFIG register region in J721S2 has multiple non-addressable
regions, accordingly split the existing wkup_pmx region as follows to avoid
the non-addressable regions and include the rest of valid WKUP_PADCONFIG
registers. Also update references to old nodes with new ones.
wkup_pmx0 -> 13 pins (WKUP_PADCONFIG 0 - 12)
wkup_pmx1 -> 11 pins (WKUP_PADCONFIG 14 - 24)
wkup_pmx2 -> 72 pins (WKUP_PADCONFIG 26 - 97)
wkup_pmx3 -> 1 pin (WKUP_PADCONFIG 100)
Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC")
Cc: <stable@vger.kernel.org> # 6.3
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Thejasvi Konduru <t-konduru@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602153554.1571128-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7afe7b5969329175ac4f55a6b9c13ba4f6dc267e upstream.
To store uncompressed bl2 more space is required than partition is
actually defined.
There is currently no known usage of this reserved partition.
Openwrt uses same partition layout.
We added same change to u-boot with commit d7bb1099 [1].
[1] https://source.denx.de/u-boot/u-boot/-/commit/d7bb109900c1ca754a0198b9afb50e3161ffc21e
Cc: stable@vger.kernel.org
Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230528113343.7649-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3bfbff9b461e3506dfb5b2904e8c15a0aea39e07 ]
The bootrom burned into the MT7986 SoC will try multiple locations on
the SPI-NAND flash to load bl2 in case the bl2 image located at the the
previously attempted offset is corrupt.
Use 0x100000 instead of 0x80000 as partition size for bl2 on SPI-NAND,
allowing for up to four redundant copies of bl2 (typically sized a
bit less than 0x40000).
Fixes: 8e01fb15b8157 ("arm64: dts: mt7986: add Bananapi R3")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/ZH9UGF99RgzrHZ88@makrotopia.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4366b5695c984b8a3fc8b31de9e758c8f6d1aed ]
The capacity-dmips-mhz parameter was miscalculated: this SoC runs
the first (Cortex-A55) cluster at a maximum of 2000MHz and the
second (Cortex-A76) cluster at a maximum of 2200MHz.
In order to calculate the right capacity-dmips-mhz, the following
test was performed:
1. CPUFREQ governor was set to 'performance' on both clusters
2. Ran dhrystone with 500000000 iterations for 10 times on each cluster
3. Calculated the mean result for each cluster
4. Calculated DMIPS/MHz: dmips_mhz = dmips_per_second / cpu_mhz
5. Scaled results to 1024:
result_c0 = dmips_mhz_c0 / dmips_mhz_c1 * 1024
The mean results for this SoC are:
Cluster 0 (LITTLE): 12016411 Dhry/s
Cluster 1 (BIG): 31702034 Dhry/s
The calculated scaled results are:
Cluster 0: 426.953226899238 (rounded to 427)
Cluster 1: 1024
Fixes: 48489980e27e ("arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230602183515.3778780-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d498cce9298a71e3896e2d1aee24a1a4c531d81 ]
Add the cpufreq nodes for MT8192 SoC.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230317061944.15434-1-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Stable-dep-of: a4366b5695c9 ("arm64: dts: mediatek: mt8192: Fix CPUs capacity-dmips-mhz")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b38c6ced4ec5b3f6260ff6cc2b71e8a3d8c897d7 ]
main_i2c0 is aliased as i2c0 which creates a problem for u-boot R5
SPL attempting to reuse the same definition in the common board
detection logic as it looks for the first i2c instance as the bus on
which to detect the eeprom to understand the board variant involved.
Switch main_i2c0 to i2c3 alias allowing us to introduce wkup_i2c0
and potentially space for mcu_i2c instances in the gap for follow on
patches.
Fixes: 635fb18ba008 ("arch: arm64: dts: Add support for AM69 Starter Kit")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602214937.2349545-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14462bd0b247d05070d48d0f02eb7ca2680ab7bd ]
The wkup_pmx register region in j784s4 has multiple non-addressable
regions, hence the existing wkup_pmx region is split as follows to
avoid the non-addressable regions. The pinctrl node offsets are
also corrected as per the newly split wkup_pmx* nodes.
wkup_pmx0 -> 13 pins (WKUP_PADCONFIG 0 - 12)
wkup_pmx1 -> 11 pins (WKUP_PADCONFIG 14 - 24)
wkup_pmx2 -> 72 pins (WKUP_PADCONFIG 26 - 97)
wkup_pmx3 -> 1 pin (WKUP_PADCONFIG 100)
Fixes: 4664ebd8346a ("arm64: dts: ti: Add initial support for J784S4 SoC")
Signed-off-by: Thejasvi Konduru <t-konduru@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230503083143.32369-1-t-konduru@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c10a9df30e3401bd5a5ee43f1afd6c2b2ca75ad7 ]
main_i2c0 is aliased as i2c0 which creates a problem for u-boot R5
SPL attempting to reuse the same definition in the common board
detection logic as it looks for the first i2c instance as the bus on
which to detect the eeprom to understand the board variant involved.
Switch main_i2c0 to i2c3 alias allowing us to introduce wkup_i2c0
and potentially space for mcu_i2c instances in the gap for follow on
patches.
Fixes: e20a06aca5c9 ("arm64: dts: ti: Add support for J784S4 EVM board")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602214937.2349545-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 155e7635ed1f3814d94d12556a3a0fed41d05b76 ]
Mailbox nodes are now disabled by default. The BeagleBoard AI64 DT
addition went in at around the same time and must have missed that
change so the mailboxes are not re-enabled. Do that here.
Fixes: fae14a1cb8dd ("arm64: dts: ti: Add k3-j721e-beagleboneai64")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230515172137.474626-1-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 11a1397bbf69e408223bb691858a0fcd295a8f76 ]
The USB HC node is missing the interconnect paths, so add them.
Fixes: 7f7e5c1b037f ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601103817.4066446-1-abel.vesa@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 223ce29c8b7e5b00f01a68387aabeefd77d97f06 ]
The framebuffer configuration for edo pdx203, written in edo dtsi (which
is overwritten in pdx206 dts for its smaller panel) has to use a
1096x2560 configuration as this is what the panel (and framebuffer area)
has been initialized to. Downstream userspace also has access to (and
uses) this 2.5k mode by default, and only switches the panel to 4k when
requested.
This is similar to commit be8de06dc397 ("arm64: dts: qcom:
sm8150-kumano: Panel framebuffer is 2.5k instead of 4k") which fixed the
same for the previous generation Sony platform.
Fixes: 69cdb97ef652 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606211418.587676-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b2c7ac8e469ab7f92e50c34ad4012a77e79d078 ]
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-8-b4a985f57b8b@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 91e83140b5dd5598fbcfada3ee1f8b2b410c3731 ]
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Fixes: c83545d95376 ("arm64: dts: sdm845: Add rpmh-rsc node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-6-b4a985f57b8b@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b04cbd81b0e60c5151a310e7b730dc4a951a211 ]
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-5-b4a985f57b8b@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ab033e7846f91953244d0626b28ce66412b813b3 ]
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Fixes: 6bd20c54b589 ("arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-3-b4a985f57b8b@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a325956fa7048906e26a4535ac2e87e111788fe8 ]
The realtek Bluetooth module uses the same driver as the
realtek,rtl8822cs-bt and the realtek,rtl8723bs-bt, however by selecting
the 8723bs advanced power saving features are disabled that appear
to interfere with normal operation of the bluetooth module. This
change switches the compatible string to disable power saving. Without
this patch evtest of a paired bluetooth controller fails, with this
patch the controller operates as expected.
Fixes: b6986b7920bb ("arm64: dts: rockchip: Update compatible for bluetooth")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230508160811.3568213-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d011933000ed9054c649952d83162d24f020a93 ]
wkup_pmx splits into multiple regions. Like
wkup_pmx0 -> 13 pins (WKUP_PADCONFIG 0 - 12)
wkup_pmx1 -> 2 pins (WKUP_PADCONFIG 14 - 15)
wkup_pmx2 -> 59 pins (WKUP_PADCONFIG 26 - 84)
wkup_pmx3 -> 8 pins (WKUP_PADCONFIG 93 - 100)
With this split, pin offset needs to be adjusted to
match with new pmx for all pins above wkup_pmx0.
Example a pin under wkup_pmx1 should start from 0 instead of
old offset(0x38 WKUP_PADCONFIG 14 offset)
J7200 Datasheet (Table 6-106, Section 6.4 Pin Multiplexing) :
https://www.ti.com/lit/ds/symlink/dra821u.pdf
Fixes: 9ae21ac445e9 ("arm64: dts: ti: k3-j7200: Fix wakeup pinmux range")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230419040007.3022780-2-u-kumar1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 28ee08cef4f838c343013330a3cd12674c4dd113 ]
The I2S0_8CH_MCLKOUT clock rate on Rock 5B board defaults to 12 MHz and
it is used to provide the master clock (MCLK) for the ES8316 audio
codec.
On sound card initialization, this limits the allowed sample rates
according to the MCLK/LRCK ratios supported by the codec, which results
in the following non-standard rates: 15625, 30000, 31250, 46875.
Hence, the very first access of the sound card fails:
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
However, all subsequent attempts will succeed, as the audio graph card
will request a correct clock frequency, based on the stream sample rate
and the multiplication factor.
Assign MCLK to 12.288 MHz, which allows the codec to advertise most of
the standard sample rates.
Fixes: 55529fe3f32d ("arm64: dts: rockchip: Add rk3588-rock-5b analog audio")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-4-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a2c4e5635177939a088d22fa35c6a7032725663 ]
The schematics are misleading, the flow control is for HSCIF1. We need
SCIF1 for GNSS/GPS which does not use flow control.
Fixes: c6c816e22bc8 ("arm64: dts: ulcb-kf: enable SCIF1")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230525084823.4195-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea6c5f21efecbaa3a14cb21c5bc0e23c84473a11 ]
Firmware shipped on mt8195 Chromebooks is affected by the GICR
save/restore issue as described by the patch ("dt-bindings:
interrupt-controller: arm,gic-v3: Add quirk for Mediatek SoCs w/
broken FW"). Add the quirk property.
Fixes: 5eb2e303ec6b ("arm64: dts: mediatek: Introduce MT8195 Cherry platform's Tomato")
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230515131353.v2.5.Ia0b6ebbaa351e3cd67e201355b9ae67783c7d718@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d72cfbd6fcf7cd02084991eee47ecc9f4b4c1e69 ]
Firmware shipped on mt8192 Chromebooks is affected by the GICR
save/restore issue as described by the patch ("dt-bindings:
interrupt-controller: arm,gic-v3: Add quirk for Mediatek SoCs w/
broken FW"). Add the quirk property.
Fixes: 331fae2fc922 ("arm64: dts: mediatek: Introduce MT8192-based Asurada board family")
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230515131353.v2.4.Ie7e600278ffbed55a1e5a58178203787b1449b35@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 42127f578ebde652d1373e0233356fbd351675c4 ]
Firmware shipped on mt8183 Chromebooks is affected by the GICR
save/restore issue as described by the patch ("dt-bindings:
interrupt-controller: arm,gic-v3: Add quirk for Mediatek SoCs w/
broken FW"). Add the quirk property.
Fixes: cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board")
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230515131353.v2.3.I525a2ed4260046d43c885ee1275e91707743df1c@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c77612a07d18d4425fd8ddd532a8a9b8e1970c53 ]
Correct the typo in 'regulator-name' property.
apq8096-ifc6640.dtb: v1p05-regulator: 'regulator-name' is a required property
apq8096-ifc6640.dtb: v1p05-regulator: Unevaluated properties are not allowed ('reglator-name' was unexpected)
Fixes: 6cbdec2d3ca6 ("arm64: dts: qcom: msm8996: Introduce IFC6640")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507174516.264936-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 83022f6484b11a60dbf9a95a88c7ef8e59c4b19c ]
This file is using definitions from the spmi-vadc header, so we need to
include it.
Fixes: 11975b9b8135 ("arm64: dts: qcom: Add pm7250b PMIC")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407-pm7250b-sid-v1-1-fc648478cc25@fairphone.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5500f823db38db073d30557af159b77fb1f2bf26 ]
The 96Boards specification expects a 1.8V power rail on the low-speed
expansion connector that is able to provide at least 0.18W / 100 mA.
According to the DB410c hardware user manual this is done by connecting
both L15 and L16 in parallel with up to 55mA each (for 110 mA total) [1].
Unfortunately the current regulator setup in the DB410c device tree
does not implement the specification correctly and only provides 5 mA:
- Only L15 is marked always-on, so L16 is never enabled.
- Without specifying a load the regulator is put into LPM where
it can only provide 5 mA.
Fix this by:
- Adding proper voltage constraints for L16.
- Making L16 always-on.
- Adding regulator-system-load for both L15 and L16. 100 mA should be
available in total, so specify 50 mA for each. (The regulator
hardware can only be in normal (55 mA) or low-power mode (5 mA) so
this will actually result in the expected 110 mA total...)
[1]: https://www.96boards.org/documentation/consumer/dragonboard/dragonboard410c/hardware-docs/hardware-user-manual.md.html#power-supplies
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 828dd5d66f0f ("arm64: dts: apq8016-sbc: make 1.8v available on LS expansion")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-2-54d4960a05fc@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e27654df20d77ad7549a3cf6739ebaa3aa59a088 ]
For some reason DB410c has completely bogus regulator constraints that
actually just correspond to the programmable voltages which are already
provided by the regulator driver. Some of them are not just outside the
recommended operating conditions of the APQ8016E SoC but even exceed
the absolute maximum ratings, potentially risking permanent device
damage.
In practice it's not quite as dangerous thanks to the RPM firmware:
It turns out that it has its own voltage constraints and silently
clamps all regulator requests. For example, requesting 3.3V for L5
(allowed by the current regulator constraints!) still results in 1.8V
being programmed in the actual regulator hardware.
Experimentation with various voltages shows that the internal RPM
voltage constraints roughly correspond to the safe "specified range"
in the PM8916 Device Specification (rather than the "programmable
range" used inside apq8016-sbc.dtsi right now).
Combine those together with some fixed voltages used in the old
msm-3.10 device tree from Qualcomm to give DB410c some actually valid
voltage constraints.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 4c7d53d16d77 ("arm64: dts: apq8016-sbc: add regulators support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-1-54d4960a05fc@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a0156b8862665a3e31c8280607388e3001ace3d ]
Add missing reg property to touchscreen child node to fix dtbs W=1 warnings:
Warning (unit_address_vs_reg): /soc@0/geniqup@ac0000/i2c@a98000/touchscreen@20/rmi4-f12@12: node has a unit name, but no reg or ranges property
Fixes: be497abe19bf ("arm64: dts: qcom: Add support for Xiaomi Mi Mix2s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Molly Sophia <mollysophia379@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-18-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 950a4fe6ec8498799d1c7bd31a489a718f94a87e ]
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/pinctrl@f000000: simple-bus unit address format error, expected "f100000"
Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-17-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3cbf49ef16962ab6d99a3659cb34a33c5f147b50 ]
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/crypto@1de0000: simple-bus unit address format error, expected "1dfa000"
Fixes: 433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-16-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a560ab70c6e28ba784a824611d3f58969d8fadba ]
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/phy@88e9000: simple-bus unit address format error, expected "88e8000"
Fixes: 2458a305e80e ("arm64: dts: qcom: sm8350: switch to combo usb3/dp phy")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-15-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ab98c21bc9246f421a6ae70e69f1b73cea6f85e3 ]
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/phy@1c0f000: simple-bus unit address format error, expected "1c0e000"
Fixes: 6daee40678a0 ("arm64: dts: qcom: sm8350: add PCIe devices")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-14-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 41d6bca799b3f40d4d3c22dd4545aeac7c210e33 ]
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/dma-controller@900000: simple-bus unit address format error, expected "9800000"
Fixes: bc08fbf49bc8 ("arm64: dts: qcom: sm8350: Define GPI DMA engines")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2358b43256080459fcc5642265ed4fec75558f8c ]
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/thermal-sensor@4410000: simple-bus unit address format error, expected "4411000"
Fixes: 7b74cba6b13f ("arm64: dts: qcom: sm6115: Add TSENS node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a05b913a27e46926ba60ba2bcacc7ec7a8403e4c ]
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/camss@a00000: simple-bus unit address format error, expected "acb3000"
Fixes: d48a6698a6b7 ("arm64: dts: qcom: sdm845: Add CAMSS ISP node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c8b7faa7e9913a94444b3f00b6480e53a174fcfd ]
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/camss@ca00000: simple-bus unit address format error, expected "ca00020"
Fixes: f3d5d3cc6971 ("arm64: dts: qcom: sdm630: Configure the camera subsystem")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
Krzysztof Kozlowski
Yogesh Hegde
Alexander Stein
Fabio Estevam
Christopher Obbard
Dmitry Baryshkov
Kathiravan T
Dinh Nguyen
Benjamin Gaignard
Hugo Villeneuve
Yashwanth Varakala
Tim Harvey
Sinthu Raja
Frank Wunderlich
Daniel Golle
Nícolas F. R. A. Prado
Allen-KH Cheng
Nishanth Menon
Thejasvi Konduru
Andrew Davis
Abel Vesa
Marijn Suijten
Konrad Dybcio
Chris Morgan
Keerthy
Cristian Ciocaltea
Wolfram Sang
Douglas Anderson
Luca Weiss
Stephan Gerhold