aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/rockchip
AgeCommit message (Collapse)Author
2020-06-03arm64: dts: rockchip: swap interrupts interrupt-names rk3399 gpu nodeJohan Jonker
[ Upstream commit c604fd810bda667bdc20b2c041917baa7803e0fb ] Dts files with Rockchip rk3399 'gpu' nodes were manually verified. In order to automate this process arm,mali-midgard.txt has been converted to yaml. In the new setup dtbs_check with arm,mali-midgard.yaml expects interrupts and interrupt-names values in the same order. Fix this for rk3399. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/ arm,mali-midgard.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200425143837.18706-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03arm64: dts: rockchip: fix status for &gmac2phy in rk3328-evb.dtsJohan Jonker
[ Upstream commit c617ed88502d0b05149e7f32f3b3fd8a0663f7e2 ] The status was removed of the '&gmac2phy' node with the apply of a patch long time ago, so fix status for '&gmac2phy' in 'rk3328-evb.dts'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200425122345.12902-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20arm64: dts: rockchip: Rename dwc3 device nodes on rk3399 to make dtc happyChen-Yu Tsai
commit 190c7f6fd43a776d4a6da1dac44408104649e9b7 upstream. The device tree compiler complains that the dwc3 nodes have regs properties but no matching unit addresses. Add the unit addresses to the device node name. While at it, also rename the nodes from "dwc3" to "usb", as guidelines require device nodes have generic names. Fixes: 7144224f2c2b ("arm64: dts: rockchip: support dwc3 USB for rk3399") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-7-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: rockchip: Replace RK805 PMIC node name with "pmic" on rk3328 boardsChen-Yu Tsai
commit 83b994129fb4c18a8460fd395864a28740e5e7fb upstream. In some board device tree files, "rk805" was used for the RK805 PMIC's node name. However the policy for device trees is that generic names should be used. Replace the "rk805" node name with the generic "pmic" name. Fixes: 1e28037ec88e ("arm64: dts: rockchip: add rk805 node for rk3328-evb") Fixes: 955bebde057e ("arm64: dts: rockchip: add rk3328-rock64 board") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-3-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-01-18arm64: dts: rockchip: Kill off "simple-panel" compatiblesRob Herring
"simple-panel" is a Linux driver and has never been an accepted upstream compatible string, so remove it. Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-rockchip@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200117230851.25434-1-robh@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-18arm64: dts: rockchip: rename dwmmc node names to mmcJohan Jonker
Current dts files with 'dwmmc' nodes are manually verified. In order to automate this process rockchip-dw-mshc.txt has to be converted to yaml. In the new setup rockchip-dw-mshc.yaml will inherit properties from mmc-controller.yaml and synopsys-dw-mshc-common.yaml. 'dwmmc' will no longer be a valid name for a node, so change them all to 'mmc' Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200115185244.18149-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-13arm64: dts: rockchip: hook up the px30-evb dsi displayHeiko Stuebner
Create the necessary display nodes to activate the Xingpeng XPP055C272 dsi display that can be found on the px30-evb. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20191209145301.5307-2-heiko@sntech.de
2020-01-13arm64: dts: rockchip: Enable sdio0 and uart0 on rk3399-roc-pc-mezzanineMarkus Reichl
The mezzanine board carries an E key type M.2 slot. This is connected to USB, SDIO and UART0. Enable sdio and uart0 for use with wlan and/or bt M.2 cards. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/20200109154211.1530-1-m.reichl@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-13arm64: dts: rockchip: add reg property to brcmf sub-nodesJohan Jonker
An experimental test with the command below gives this error: rk3399-firefly.dt.yaml: dwmmc@fe310000: wifi@1: 'reg' is a required property rk3399-orangepi.dt.yaml: dwmmc@fe310000: wifi@1: 'reg' is a required property rk3399-khadas-edge.dt.yaml: dwmmc@fe310000: wifi@1: 'reg' is a required property rk3399-khadas-edge-captain.dt.yaml: dwmmc@fe310000: wifi@1: 'reg' is a required property rk3399-khadas-edge-v.dt.yaml: dwmmc@fe310000: wifi@1: 'reg' is a required property So fix this by adding a reg property to the brcmf sub node. Also add #address-cells and #size-cells to prevent more warnings. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200110142128.13522-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-13arm64: dts: rockchip: fix dwmmc clock name for rk3308Johan Jonker
An experimental test with the command below gives this error: rk3308-evb.dt.yaml: dwmmc@ff480000: clock-names:2: 'ciu-drive' was expected 'ciu-drv' is not a valid dwmmc clock name, so fix this by changing it to 'ciu-drive'. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200110161200.22755-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-13arm64: dts: rockchip: fix dwmmc clock name for px30Johan Jonker
An experimental test with the command below gives this error: px30-evb.dt.yaml: dwmmc@ff390000: clock-names:2: 'ciu-drive' was expected 'ciu-drv' is not a valid dwmmc clock name, so fix this by changing it to 'ciu-drive'. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200110161200.22755-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-09arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pcMarkus Reichl
The rk3399-roc-pc uses a MP8859 DC/DC converter for 12V supply. This supplies 5V only in default state after booting. Now we can control the output voltage via I2C interface. Add a node for the driver to reach 12V. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/20200106211633.2882-6-m.reichl@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-07arm64: dts: rockchip: rk3399-hugsun-x99: remove supports-sd and ↵Johan Jonker
supports-emmc options The entries "supports-sd" and "supports-emmc" are not a valid Linux option in relation with SD card or eMMC, so remove them. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20191231175054.4929-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-07arm64: dts: rockchip: rk3399-firefly: remove num-slots from &sdio0 nodeJohan Jonker
The option "num-slots" was deprecated long time ago, so remove it. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20191231191154.5587-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-06arm64: dts: rockchip: Add PX30 LVDSMiquel Raynal
Describe LVDS IP. Add the CRTC and LVDS relevant endpoints so they can be linked together. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20191224143900.23567-12-miquel.raynal@bootlin.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-06arm64: dts: rockchip: add dsi controller for px30Heiko Stuebner
This adds the dw-mipi-dsi controller and hooks it into the display-subsystem on px30. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20200106112005.795834-1-heiko@sntech.de
2020-01-06arm64: dts: rockchip: Fix IR on Beelink A1Robin Murphy
Apparently I wasn't paying enough attention... And nor is the lazy test of `cat /dev/lirc0` sufficiently blunder-proof. Oh well, with the correct polarity, let's also hook up a keymap now that one for the standard Beelink remote has handily appeared. Fixes: 79702ded8c2f ("arm64: dts: rockchip: Add Beelink A1") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/44269c08e2a5d75b03ded87d2eb11621762d8249.1577636223.git.robin.murphy@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-06arm64: dts: rockchip: Add PX30 DSI DPHYMiquel Raynal
Add the PHY which outputs MIPI DSI and LVDS. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20191224143900.23567-11-miquel.raynal@bootlin.com [added dsi power-domain, following vendor-kernel] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-31arm64: dts: rockchip: Add RK3328 idle stateRobin Murphy
Downstream RK3328 DTBs describe a CPU idle state matching that present on other SoCs like RK3399. This works with upstream Trusted Firmware-A too, so let's add it here. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/a8c83e705d387446ea8121516d410e38b2d9c57b.1577640736.git.robin.murphy@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-31arm64: dts: rockchip: remove identical &uart0 node from rk3368-lion-haikouJohan Jonker
There are two identical &uart0 nodes in this dts file, so remove one of them. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20191228074757.2075-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-21arm64: dts: rockchip: Add Radxa Rock Pi N10 initial supportJagan Teki
Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has - VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3399Pro SOM need to mount on top of radxa dalang carrier board for making Rock Pi N10 SBC. So, add initial support for Rock Pi N10 by including rk3399, rk3399pro vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20191216174711.17856-5-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-21arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial supportJagan Teki
VMARC RK3399Pro SOM is a standard SMARC SOM design with Rockchip RK3399Pro SoC, which is designed by Vamrs. Specification: - Rockchip RK3399Pro - PMIC: RK809-3 - SD slot, 16GiB eMMC - 2xUSB-2.0, 1xUSB3.0 - USB-C for power supply - Ethernet, PCIe - HDMI, MIPI-DSI/CSI, eDP Add initial support for VMARC RK3399Pro SOM, this would use with associated carrier board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20191216174711.17856-3-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-21arm64: dts: rockchip: hook up bluetooth at uart0 on rockpro64Soeren Moch
With enabled wifi support (required for firmware loading) for the Ampak AP6359SA based wifi/bt combo module we now also can enable the bluetooth part. Suggested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Soeren Moch <smoch@web.de> Link: https://lore.kernel.org/r/20191218223523.30154-3-smoch@web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-21arm64: dts: rockchip: enable wifi module at sdio0 on rockpro64Soeren Moch
RockPro64 supports an Ampak AP6359SA based wifi/bt combo module. The BCM4359/9 wifi controller in this module is connected to sdio0, enable this interface. Use the in-band sdio irq instead of the out-of-band wifi_host_wake_l signal since the latter is not working reliably on this board (probably due to it's PCIe WAKE# connection). Signed-off-by: Soeren Moch <smoch@web.de> Link: https://lore.kernel.org/r/20191218223523.30154-2-smoch@web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-16arm64: dts: rockchip: split rk3399-rockpro64 for v2 and v2.1 boardsKatsuhiro Suzuki
This patch splits rk3399-rockpro64 dts file to 2 files for v2 and v2.1 boards. Both v2 and v2.1 boards can use almost same settings but we find a difference in I2C address of audio CODEC ES8136. Reported-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Link: https://lore.kernel.org/r/20191202055929.26540-1-katsuhiro@katsuster.net [put pine64,rockpro64-v2.* into an enum] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-16arm64: dts: rockchip: enable the gpu on px30-evbHeiko Stuebner
The px30 has a Mali Bifrost gpu, so enable it on the evb board and connect it with its supplying regulator. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20191208145508.3124-3-heiko@sntech.de
2019-12-16arm64: dts: rockchip: add the gpu for px30Heiko Stuebner
The px30 contains a Mali Bifrost gpu, so add the necessary core node for it with interrupts and powerdomains. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20191208145508.3124-2-heiko@sntech.de
2019-12-13arm64: dts: rockchip: Add GPU cooling device for RK3399Robin Murphy
As for RK3288, now that we have a binding for the GPU we can hook up the missing cooling device for the thermal zone. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/cb905e17526d846d6d35fb86fbd3c8ba4af4cdaf.1574974673.git.robin.murphy@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-13arm64: dts: rockchip: Add regulators for PCIe for Radxa Rock Pi 4 boardMatwey V. Kornilov
Add 0.9V and 1.8V voltage regulators for Radxa Rock Pi 4 board PCIe. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Link: https://lore.kernel.org/r/20191120161302.5157-1-matwey@sai.msu.ru Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-13arm64: dts: rockchip: Remove always-on properties from regulator nodes on ↵Markus Reichl
rk3399-roc-pc. Some regulators don't need the always-on property, remove it. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/f985665c-86c0-1657-14f8-f77e2ce5a3f7@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Enable MTD Flash on rk3399-roc-pcMarkus Reichl
rk3399-roc-pc has 16 MB SPI NOR Flash, enable it. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/94f44e1d-86c6-1e32-aa63-56edbd7d75f5@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Add SDR104 mode to SD-card I/F on rk3399-roc-pcMarkus Reichl
Add SDR104 capability and regulators to SD card node. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/1b9b8314-8778-2d48-6f7a-3502c2146c42@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Use correct pin for lcd-reset pinctrl on rk3399-roc-pcMarkus Reichl
Fix typo according to schematics. The original pin is needed to enable vcc3v0_sd in second patch of this series. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/cd5fd3a8-b0eb-9dc1-c473-9355762cdaa5@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Fix min voltage for rk3399-firefly vdd_logKever Yang
The min/max value of vdd_log is decide by pwm IO voltage and its resistors, the rk3399-firefly board's pwm regulator circuit is designed for IO voltage at 1.8V, while the board actually use 3.0V for IO, which at last lead to the min-microvolt to '430mV' instead of '800mV'. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Link: https://lore.kernel.org/r/20191111005158.25070-1-kever.yang@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Fix vdd_log on rk3399-roc-pcMarkus Reichl
On rk3399 vdd_log shall not exceed 1.0 V. On rk3399-roc-pc vdd_log is presently 1118 mV. Fix by setting the min voltage of the respective pwm-regulator down to 450 mV. This results in a vdd_log of 953 mV. Specify the supply to silence warning. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/d786ef47-eda8-3994-2ef2-fc4a584bcdcc@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Disable HS400 for mmc on rk3399-roc-pcMarkus Reichl
Working with rootfs on two 128GB mmcs on rk3399-roc-pc. One (mmc name 128G72, one screw hole) works fine in HS400 mode. Other (mmc name DJNB4R, firefly on pcb, two screw holes) gets lots of mmc1: "running CQE recovery", even hangs with damaged fs, when running under heavy load, e.g. compiling kernel. Both run fine with HS200. Disabling CQ with patch mmc: core: Add MMC Command Queue Support kernel parameter [0] did not help. [0] https://gitlab.com/ayufan-repos/rock64/linux-mainline-kernel/commit/54e264154b87dfe32a8359b2726e2d5611adbaf3 Therefore I propose to disable HS400 mode on roc-pc for now. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/367bf78a-f079-f0b4-68fe-52c86823c174@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: enable tsadc on px30-evbHeiko Stuebner
Enable the tsadc thermal controller on px30-evb. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20191116095249.31193-2-heiko@sntech.de
2019-12-09arm64: dts: rockchip: add thermal infrastructure to px30Heiko Stuebner
Add tsadc and necessary connections to core px30 components. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20191116095249.31193-1-heiko@sntech.de
2019-12-09arm64: dts: rockchip: remove 408MHz operating point from px30Heiko Stuebner
It looks like the px30 is running unstable at this 408MHz operating point. This shows in stalled threads and other big numbers of kernel exception. At 600MHz and above it instead works stable and as expected. As the 408MHz point doesn't even decrease the voltage compared to 600MHz, just drop this 408MHz operating point for now. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20191116095220.31122-1-heiko@sntech.de
2019-12-09arm64: dts: rockchip: Improve nanopi4 PCIeRobin Murphy
Expand the power tree description with the 0V9 and 1V8 supplies to the RK3399 PCIe block. The NanoPis M4 and NEO4 just route 2 lanes to the user expansion pins, so there's not much more to say at the board level for them; NanoPC-T4 has a standard M.2 connector so we can at least claim the 3.3V supply to that too. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/a04a17f4b9b12e8698c76b34e7ca22f0c81845ce.1573908195.git.robin.murphy@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Fix NanoPC-T4 cooling mapsRobin Murphy
Although it appeared to follow logically from the bindings, apparently the thermal framework can't properly cope with a single cooling device being shared between multiple maps. The CPU zone is probably easier to overheat, so remove the references to the (optional) fan from the GPU cooling zone to avoid things getting confused. Hopefully GPU-intensive tasks will leak enough heat across to the CPU zone to still hit the fan trips before reaching critical GPU temperatures. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/5bb39f3115df1a487d717d3ae87e523b03749379.1573908197.git.robin.murphy@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Enable PCIe for Radxa Rock Pi 4 boardMatwey V. Kornilov
Radxa Rock Pi 4 is equipped with M.2 PCIe slot, so enable PCIe for the board. The changes has been tested with Intel SSD 660p series device. 01:00.0 Class 0108: Device 8086:f1a8 (rev 03) Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Link: https://lore.kernel.org/r/20191117101545.6406-1-matwey@sai.msu.ru Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Add regulators for pcie on rk3399-rock960Anand Moon
As per Rock960 schematics add 0V9 and 1V8 voltage supplies to the RK3399 PCIe block. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Link: https://lore.kernel.org/r/20191117140728.917-1-linux.amoon@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Enable HDMI Sound on rk3399-roc-pcMarkus Reichl
HDMI-Sound is the only available sound card on rk3399-roc-pc, enable it. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/c9db5599-743b-bb90-999e-5989be6556ac@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Add regulators for pcie on rk3399-roc-pcMarkus Reichl
Add regulators to pcie node from schematics. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/8fa0c3da-b64d-f47f-a9eb-b3456a3fd073@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-09arm64: dts: rockchip: Add node for gpu on rk3399-roc-pcMarkus Reichl
rk3399-roc-pc has a Mali gpu, enable it for use with panfrost and mesa >19.2. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/c2b88509-129d-46d4-9e23-15d0482951be@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-05Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "As always, the bulk of updates. Some of the news this cycle: New SoC descriptions: - Broadcom BCM2711 - Amlogic Meson A1 and G12 - Freescale S32V234 - Marvell Armada AP807/AP807-quad and CP115 - Realtek RTD1293 and RTD1296 - Rockchip RK3308 New boards and platforms: - Allwinner: NanoPi Duo2 - Amlogic: Ugoos am6 - Atmel at91: Overkiz Kizbox2/4 - Broadcom: RPi4, Luxul XWC-2000 - Marvell: New Espressobin flavor - NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and OPOS6ULDev - Renesas: Salvator-XS - Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (653 commits) ARM: dts: logicpd-torpedo: Disable USB Host arm: dts: mt6323: add keys, power-controller, rtc and codec arm64: dts: mt8183: add systimer0 device node dt-bindings: mediatek: update bindings for MT8183 systimer arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board. arm64: dts: rockchip: Add Beelink A1 dt-bindings: ARM: rockchip: Add Beelink A1 arm64: dts: rockchip: Add RK3328 audio pipelines arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports arm64: dts: ti: k3-j721e-main: add USB controller nodes ARM: dts: aspeed-g6: Add timer description ARM: dts: aspeed: ast2600evb: Enable i2c buses ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards dt-bindings: arm: at91: Document Kizbox2-2 board binding arm64: dts: meson-gx: fix i2c compatible arm64: dts: meson-gx: cec node should be disabled by default arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible arm64: dts: meson-gxm: fix gpu irq order arm64: dts: meson-g12a: fix gpu irq order ...
2019-11-09arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-ccPeter Geis
With working GPIO, during init the GPIO state s reset. This causes the sdmmc regulator to shut down, preventing detection. Removing and replacing the card will allow it to be detected, but that should not be necessary. Fix this by setting the regulator on at boot. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20191016185945.1962-1-pgwipeout@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-11-08arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.Markus Reichl
For rk3399-roc-pc is a mezzanine board available that carries M.2 and POE interfaces. Use it with a separate dts. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/0fb4e21a-fe78-00aa-6142-ca8682a913eb@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-25 09:02:16 +0000