aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/renesas
AgeCommit message (Collapse)Author
2020-11-02Merge branch 'v5.8/standard/base' into v5.8/standard/bcm-2xxx-rpiBruce Ashfield
2020-10-29arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channelsGeert Uytterhoeven
[ Upstream commit c91dfc9818df5f43c10c727f1cecaebdb5e2fa92 ] According to Technical Update TN-RCT-S0352A/E, MSIOF1 DMA can only be used with SYS-DMAC0 on R-Car E3. Fixes: 62c0056f1c3eb15d ("arm64: dts: renesas: r8a774c0: Add MSIOF nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200917132117.8515-3-geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channelsGeert Uytterhoeven
[ Upstream commit 453802c463abd003a7c38ffbc90b67ba162335b6 ] According to Technical Update TN-RCT-S0352A/E, MSIOF1 DMA can only be used with SYS-DMAC0 on R-Car E3. Fixes: 8517042060b55a37 ("arm64: dts: renesas: r8a77990: Add DMA properties to MSIOF nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200917132117.8515-2-geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19Merge branch 'v5.8/standard/base' into v5.8/standard/bcm-2xxx-rpiBruce Ashfield
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-08-19arm64: dts: renesas: Fix SD Card/eMMC interface device node namesYoshihiro Shimoda
[ Upstream commit a6cb262af1e1adfa6287cb43f09021ee42beb21c ] Fix the device node names as "mmc@". Fixes: 663386c3e1aa ("arm64: dts: renesas: r8a774a1: Add SDHI nodes") Fixes: 9b33e3001b67 ("arm64: dts: renesas: Initial r8a774b1 SoC device tree") Fixes: 77223211f44d ("arm64: dts: renesas: r8a774c0: Add SDHI nodes") Fixes: d9d67010e0c6 ("arm64: dts: r8a7795: Add SDHI support to dtsi") Fixes: a513cf1e6457 ("arm64: dts: r8a7796: add SDHI nodes") Fixes: 111cc9ace2b5 ("arm64: dts: renesas: r8a77961: Add SDHI nodes") Fixes: f51746ad7d1f ("arm64: dts: renesas: Add Renesas R8A77961 SoC support") Fixes: df863d6f95f5 ("arm64: dts: renesas: initial R8A77965 SoC device tree") Fixes: 9aa3558a02f0 ("arm64: dts: renesas: ebisu: Add and enable SDHI device nodes") Fixes: 83f18749c2f6 ("arm64: dts: renesas: r8a77995: Add SDHI (MMC) support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594382634-13714-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-12arm64: dts: r8a7795-h3ulcb: Add reserved memory regionsYusuke Goda
commit 1d40ccc5723b9b3028829194c422a01cf8afd2a3 from git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git This patch adds reserved memory regions: - Lossy Decompression 48 MiB : 0x0054000000 -> 0x0056ffffff - Default CMA area 400 MiB : 0x0057000000 -> 0x006fffffff - CMA area for MMP 256 MiB : 0x0070000000 -> 0x007fffffff Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> [takeshi.kihara.df: fix W=1 dtc unit_address_vs_reg warnings] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-07-12pci: pcie-rcar: add regulators supportAndrey Gusakov
Add PCIe regulators for KingFisher board. Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-07-12arch: arm64: dts: Set gpio5-pin9 as input by defaultLimeng
The gpio5-pin9 is used as the interrupt pin of i2c external gpio chip, so set this pin as input by default. Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2020-06-04Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
2020-05-15arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindingsRicardo Cañuelo
Small fixes to make these DTs compliant with the adi,adv7511w binding. r8a77970-eagle.dts, r8a77970-v3msk.dts, r8a77980-condor.dts, r8a77980-v3hsk.dts, r8a77990-ebisu.dts: Remove the adi,input-style and adi,input-justification properties. r8a77995-draak.dts: Reorder the I2C slave addresses of the hdmi-encoder@39 node and remove the adi,input-style and adi,input-justification properties. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200511110611.3142-2-ricardo.canuelo@collabora.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-12arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI ↵Lad Prabhakar
Adapter V2.1 This patch adds support for AISTARVISION MIPI Adapter V2.1 board connected to G2E board. Common file aistarvision-mipi-adapter-2.1.dtsi is created which have the camera endpoint nodes for imx219 and ov5645 so that this can be re-used with other G2x platforms. r8a774c0-ek874-mipi-2.1.dts file enables the required VIN/CSI nodes and by default ties ov5645 camera endpoint to CSI2. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1587397794-11237-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-27arm64: dts: renesas: Fix IOMMU device node namesYoshihiro Shimoda
Fix IOMMU device node names as "iommu@". Fixes: 8f507babc617 ("arm64: dts: renesas: r8a774a1: Add IPMMU device nodes") Fixes: 63093a8e58be ("arm64: dts: renesas: r8a774b1: Add IPMMU device nodes") Fixes: 6c7e02178e8f ("arm64: dts: renesas: r8a774c0: Add IPMMU device nodes") Fixes: 3b7e7848f0e8 ("arm64: dts: renesas: r8a7795: Add IPMMU device nodes") Fixes: e4b9a493df45 ("arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes") Fixes: 389baa409617 ("arm64: dts: renesas: r8a7796: Add IPMMU device nodes") Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes") Fixes: ce3b52a1595b ("arm64: dts: renesas: r8a77970: Add IPMMU device nodes") Fixes: a3901e7398e1 ("arm64: dts: renesas: r8a77995: Add IPMMU device nodes") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/1587461775-13369-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-20arm64: dts: renesas: r8a77980: Fix IPMMU VIP[01] nodesYoshihiro Shimoda
Missing the renesas,ipmmu-main property on ipmmu_vip[01] nodes. Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1587108543-23786-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-14arm64: dts: renesas: r8a77961: Add PCIe device nodesYoshihiro Shimoda
Add PCIe device nodes for r8a77961 (R-Car M3-W+). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1586515634-28095-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-14arm64: dts: renesas: r8a77961: Add PWM device nodesYoshihiro Shimoda
Add PWM device nodes for r8a77961 (R-Car M3-W+). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1586515634-28095-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-14arm64: dts: renesas: r8a77961: Add SCIF and HSCIF nodesGeert Uytterhoeven
Add the device nodes for all SCIF and HSCIF serial ports on R-Car M3-W+. Add the missing DMA properties to the already-present SCIF2 node. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2020-04-14arm64: dts: renesas: r8a77961: Add USB3.0 device nodesYoshihiro Shimoda
This patch adds USB3.0 related device nodes for r8a77961 (R-Car M3-W+). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1585117470-8625-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-14arm64: dts: renesas: r8a77961: Add USB2.0 device nodesYoshihiro Shimoda
This patch adds USB2.0 related device nodes for r8a77961 (R-Car M3-W+). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1585117470-8625-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-03-12arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr displayFabrizio Castro
The HiHope RZ/G2M is advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. A new dts, adding everything that's required to get the panel to work with HiHope RZ/G2M, is the most convenient way to support the HiHope RZ/G2M when it's connected to the idk-1110wr. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1583957020-16359-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-03-12arm64: dts: renesas: r8a77990: Add CPUIdle support for CA53 coresTakeshi Kihara
Enable cpuidle (core shutdown) support for the CA53 cores on R-Car E3. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200309171200.21226-1-geert+renesas@glider.be
2020-03-12arm64: dts: renesas: r8a77965: Add CPUIdle support for CA57 coresTakeshi Kihara
Enable cpuidle (core shutdown) support for the CA57 cores on R-Car M3-N. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200309171112.21086-1-geert+renesas@glider.be
2020-03-12arm64: dts: renesas: r8a77961: salvator-xs: Fix memory unit-addressGeert Uytterhoeven
Correct the unit-address of the second memory node, to match the corresponding reg property. Fixes: 92980759c1699a3c ("arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200309170825.20882-1-geert+renesas@glider.be
2020-03-12arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+Yuya Hamamachi
Add initial support for the Renesas M3ULCB board equipped with an R-Car M3-W+ SiP with 8 (2 x 4) GiB of RAM. To avoid build error on 'ulcb.dtsi', ssi2 is added into 'r8a77961.dtsi'. Based on commit 92980759c1699a3c ("arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+"). Signed-off-by: Yuya Hamamachi <yuya.hamamachi.sx@renesas.com> Link: https://lore.kernel.org/r/20200309064425.25437-3-yuya.hamamachi.sx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-03-12arm64: dts: renesas: r8a77961: Add thermal nodesGeert Uytterhoeven
Add a device node for the Thermal Sensor/Chip Internal Voltage Monitor in the R-Car M3-W+ (R8A77961) SoC, and describe the thermal zones. According to the R-Car Gen3 Hardware Manual Errata for Revision 2.00 of Jan 31, 2020, the thermal parameters for R-Car M3-W+ are the same as for R-Car M3-W. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200306110025.24747-1-geert+renesas@glider.be
2020-02-21arm64: dts: renesas: rzg2: Add reset control properties for displayGeert Uytterhoeven
Add reset control properties to the device nodes for the Display Units on all supported RZ/G2 SoCs. Note that on these SoCs, there is only a single reset for each pair of DU channels. Join the clocks lines while at it, to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200218133019.22299-5-geert+renesas@glider.be
2020-02-21arm64: dts: renesas: rcar-gen3: Add reset control properties for displayGeert Uytterhoeven
Add reset control properties to the device nodes for the Display Units on all supported R-Car Gen3 SoCs. Note that on these SoCs, there is only a single reset for each pair of DU channels. The display nodes on R-Car V3M and V3H already had "resets" properties, but lacked the corresponding "reset-names" properties. Join the clocks lines while at it, to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200218133019.22299-4-geert+renesas@glider.be
2020-02-21arm64: dts: renesas: Remove use of ARCH_R8A7795Geert Uytterhoeven
CONFIG_ARCH_R8A7795 was split in CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951 in commit b925adfceb529389 ("soc: renesas: Add ARCH_R8A7795[01] for existing R-Car H3"), so its users can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200218112414.5591-1-geert+renesas@glider.be
2020-02-21arm64: dts: renesas: rcar-gen3: Add CCREE nodesGeert Uytterhoeven
Add device nodes for the CryptoCell instances on the various Renesas R-Car Gen3 SoCs that do not have support for them yet in their device trees (M3-W, M3-W+, M3-N, E3, D3). The R-Car H3 device tree already supports this device. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200124133330.16121-1-geert+renesas@glider.be
2020-02-21arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps"Geert Uytterhoeven
The Renesas-specific "vsps" property lacks a vendor prefix. Add a "renesas," prefix to comply with DT best practises. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20191105183504.21447-4-geert+renesas@glider.be
2020-02-21arm: dts: renesas: r8a77980: Remove r8a77970 DU compatibleKieran Bingham
The r8a77970 was added with a compatible string for a different device rather than adding the correct compatible to the driver. Remove the unnecessary compatible which is for a different platform. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/20190912103734.1879-1-kieran.bingham+renesas@ideasonboard.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-12-31arm64: dts: renesas: Prepare for split of ARCH_R8A7795 into ARCH_R8A7795[01]Geert Uytterhoeven
As R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+ (R8A77951) are really different SoCs, CONFIG_ARCH_R8A7795 will be split in CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951. Relax dependencies by handling both the old and the new symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-5-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Sort DTBs in MakefileGeert Uytterhoeven
Sort the entries for the various DTBs in the Makefile by SoC and board type. Keep Salvator-X(S) together, and do the same for ULCB with and without Kingfisher extension. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-4-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Drop redundant SoC prefixes from ULCB DTS file namesGeert Uytterhoeven
Unlike the V3MSK and V3HSK boards, the various "ULCB" boards are really the same boards, with different SiPs fitted, just like the Salvator-X(S) boards. Furthermore, the "H3", "M3", and "M3N" prefixes of the "ULCB" parts in the DTS file names are redundant, as they are implied by the SoC part numbers, which are also part of the file names. Hence drop the redundant prefixes, to make the DTS file names consistent with the file names for the various "Salvator-X(S)" boards. Suggested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-3-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Rename r8a7795{-es1,}* to r8a7795[01]*Geert Uytterhoeven
Despite using the same compatible values ("r8a7795"-based) because of historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+ (R8A77951) are really different SoCs, with different part numbers. Reflect this in the DTS files by changing their base names from "r8a7795-es1" and "r8a7795" to "r8a77950" resp. "r8a77951". Drop all "ES" references next to part numbers, as they are implied by the part numbers, and thus redundant. Note that DT binding headers, definitions, and compatible values are not renamed, to preserve backward compatibility. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-2-geert+renesas@glider.be
2019-12-20arm64: dts: renesas: Add EK874 board with idk-2121wr display supportFabrizio Castro
The EK874 is advertised as compatible with panel IDK-2121WR from Advantech, however the panel isn't sold alongside the board. A new dts, adding everything that's required to get the panel to to work with the EK874, is the most convenient way to support the EK874 when it's connected to the IDK-2121WR. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/1576590361-28244-7-git-send-email-fabrizio.castro@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-12-20arm64: dts: renesas: r8a77961: Add SDHI nodesGeert Uytterhoeven
Add device nodes for the SDHI Interfaces on the Renesas R-Car M3-W+ (r8a77961) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20191216124740.16647-7-geert+renesas@glider.be
2019-12-20arm64: dts: renesas: r8a77961: Add I2C nodesGeert Uytterhoeven
Add device nodes for the I2C and IIC Controllers on the Renesas R-Car M3-W+ (r8a77961) SoC, including DMA properties linking them to the DMA controllers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20191216124740.16647-6-geert+renesas@glider.be
2019-12-20arm64: dts: renesas: r8a77961: Add SYS-DMAC nodesGeert Uytterhoeven
Add device nodes for the System DMA Controllers (SYS-DMAC) on the Renesas R-Car M3-W+ (r8a77961) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20191216124740.16647-5-geert+renesas@glider.be
2019-12-20arm64: dts: renesas: r8a77961: Add RAVB nodeGeert Uytterhoeven
Add a device node for the Ethernet AVB (RAVB) interface on the Renesas R-Car M3-W+ (r8a77961) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20191216124740.16647-4-geert+renesas@glider.be
2019-12-20arm64: dts: renesas: r8a77961: Add GPIO nodesGeert Uytterhoeven
Add device nodes for the GPIO controllers on the Renesas R-Car M3-W+ (r8a77961) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20191216124740.16647-3-geert+renesas@glider.be
2019-12-20arm64: dts: renesas: r8a77961: Add RWDT nodeGeert Uytterhoeven
Add a device node for the RCLK Watchdog Timer (RWDT) on the Renesas R-Car M3-W+ (r8a77961) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20191216124740.16647-2-geert+renesas@glider.be
2019-12-20arm64: dts: renesas: r8a77990: ebisu: Remove clkout-lr-synchronous from soundKuninori Morimoto
rcar_sound doesn't support clkout-lr-synchronous in upstream. It was supported under out-of-tree rcar_sound. upstream rcar_sound is supporting - clkout-lr-synchronous + clkout-lr-asynchronous Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mubt3tux.wl-kuninori.morimoto.gx@renesas.com Fixes: 56629fcba94c698d ("arm64: dts: renesas: ebisu: Enable Audio") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-12-20arm64: dts: renesas: r8a77970: Group tuples in thermal reg propertyGeert Uytterhoeven
To improve human readability and enable automatic validation, the tuples in "reg" properties should be grouped. Fix this by grouping the tuples in the thermal node's "reg" property using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-9-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-12-20arm64: dts: renesas: Group tuples in pci ranges and dma-ranges propertiesGeert Uytterhoeven
To improve human readability and enable automatic validation, the tuples in the "ranges" and "dma-ranges" properties of PCI device nodes should be grouped. Fix this by grouping the tuples of the "ranges" and "dma-ranges" properties using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-8-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-12-20arm64: dts: renesas: Group tuples in interrupt propertiesGeert Uytterhoeven
To improve human readability and enable automatic validation, the tuples in the various properties containing interrupt specifiers should be grouped. While "make dtbs_check" does not impose this yet for the "interrupts" property, it does for the "interrupt-map" property. Fix this by grouping the tuples of the "interrupts" and "interrupt-map" properties using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-7-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-12-20arm64: dts: renesas: Group tuples in regulator-gpio states propertiesGeert Uytterhoeven
To improve human readability and enable automatic validation, the tuples in the "states" properties of device nodes compatible with "regulator-gpio" should be grouped, as reported by "make dtbs_check": $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/regulator/gpio-regulator.yaml arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi0: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi0: states:0: [3300000, 1, 1800000, 0] is too long arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi3: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi3: states:0: [3300000, 1, 1800000, 0] is too long ... Fix this by grouping the tuples using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-6-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-12-13arm64: dts: renesas: Rename r8a7796* to r8a77960*Geert Uytterhoeven
CONFIG_ARCH_R8A7796 was renamed to CONFIG_ARCH_R8A77960 in commit 39e57e14d7eaf818 ("soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W"), to avoid confusion between R-Car M3-W (R8A77960) and R-Car M3-W+ (R8A77961). Rename the DTS files as well, for consistency. Note that DT binding headers, definitions, and compatible values were not renamed, to preserve backward compatibility. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191211131311.23661-1-geert+renesas@glider.be Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-12-13arm64: dts: renesas: Remove use of ARCH_R8A7796Geert Uytterhoeven
CONFIG_ARCH_R8A7796 was renamed to CONFIG_ARCH_R8A77960 in commit 39e57e14d7eaf818 ("soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W"), so its users can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191211100438.7094-1-geert+renesas@glider.be
2019-11-01arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+Geert Uytterhoeven
Add initial support for the Renesas Salvator-X 2nd version development board equipped with an R-Car M3-W+ SiP with 8 (2 x 4) GiB of RAM. The memory map is as follows: - Bank0: 4GiB RAM : 0x000048000000 -> 0x000bfffffff 0x000480000000 -> 0x004ffffffff - Bank1: 4GiB RAM : 0x000600000000 -> 0x006ffffffff Based on a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023123342.13100-10-geert+renesas@glider.be
2019-11-01arm64: dts: renesas: Add Renesas R8A77961 SoC supportGeert Uytterhoeven
Add initial support for the Renesas R-Car M3-W+ (R8A77961) SoC. This includes: - Cortex-A57 and Cortex-A53 CPU cores (incl. L2 caches and power state definitions), - Power Management Unit, - PSCI firmware, - Pin Function Controller, - Clock, Reset, System, and Interrupt Controllers, - SCIF2 serial console, - Product Register, - ARM Architectured Timer, and various placeholders to allow to use salvator-xs.dtsi. Based on r8a7796.dtsi. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023123342.13100-9-geert+renesas@glider.be
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-29 19:36:32 +0000