aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/amlogic
AgeCommit message (Collapse)Author
2023-04-26arm64: dts: meson-g12-common: specify full DMC rangeMarc Gonzalez
[ Upstream commit aec4353114a408b3a831a22ba34942d05943e462 ] According to S905X2 Datasheet - Revision 07: DRAM Memory Controller (DMC) register area spans ff638000-ff63a000. According to DeviceTree Specification - Release v0.4-rc1: simple-bus nodes do not require reg property. Fixes: 1499218c80c99a ("arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi") Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230327120932.2158389-2-mgonzalez@freebox.fr Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node nameNeil Armstrong
[ Upstream commit eee64d8fbbdaab72bbab3e462f3a7b742d20c8c2 ] Fixes: leds: status: {...} is not of type 'array' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-12-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node ↵Neil Armstrong
name [ Upstream commit d19189f70ba596798ea49166d2d1ef36a8df5289 ] Fixes: bus@c8834000: eth-phy-mux: {...} should not be valid under {'type': 'object'} Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-9-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11arm64: dts: amlogic: meson-gx: add missing unit address to rng node nameNeil Armstrong
[ Upstream commit 61ff70708b98a85516eccb3755084ac97b42cf48 ] Fixes: bus@c8834000: rng: {...} should not be valid under {'type': 'object'} Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-6-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatibleNeil Armstrong
[ Upstream commit 2ff650051493d5bdb6dd09d4c2850bb37db6be31 ] Fixes: scpi: sensors:compatible: 'oneOf' conditional failed, one must be fixed: ['amlogic,meson-gxbb-scpi-sensors'] is too short 'arm,scpi-sensors' was expected Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-3-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node nameNeil Armstrong
[ Upstream commit 5b7069d72f03c92a0ab919725017394ebce03a81 ] Fixes: scpi: clocks: 'clock-controller' does not match any of the regexes: '^clocks-[0-9a-f]+$', 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-2-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node nameNeil Armstrong
[ Upstream commit 127f79212b07c5d9a6657a87e3eafdd889335814 ] Fixes: scpi: clocks: 'clock-controller' does not match any of the regexes: '^clocks-[0-9a-f]+$', 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-1-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11arm64: dts: meson: remove CPU opps below 1GHz for G12A boardsChristian Hewitt
[ Upstream commit 3cbd431c2b34d84605d358c8c57654193fd661fb ] Amlogic G12A devices experience CPU stalls and random board wedges when the system idles and CPU cores clock down to lower opp points. Recent vendor kernels include a change to remove 100-250MHz and other distro sources also remove the 500/667MHz points. Unless all 100-667Mhz opps are removed or the CPU governor forced to performance stalls are still observed, so let's remove them to improve stability and uptime. Fixes: b190056fa9ee ("arm64: dts: meson-g12a: add cpus OPP table") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20230119053031.21400-1-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit addressMartin Blumenstingl
[ Upstream commit f189c869ad92787ddd753558bcbae89d75825bb6 ] Node names should be generic and use hyphens instead of underscores to not cause warnings. Also nodes without a reg property should not have a unit-address. Change the scpi_dvfs node to use clock-controller as node name without a unit address (since it does not have a reg property). Fixes: 70db166a2baa ("ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230111211350.1461860-7-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11arm64: dts: meson-g12a: Fix internal Ethernet PHY unit nameMartin Blumenstingl
[ Upstream commit e7303651bbc76c848007f1cfac1fbeaa65f600d1 ] Documentation/devicetree/bindings/net/ethernet-phy.yaml defines that the node name for Ethernet PHYs should match the following pattern: ^ethernet-phy(@[a-f0-9]+)?$ Replace the underscore with a hyphen to adhere to this binding. Fixes: 280c17df8fbf ("arm64: dts: meson: g12a: add mdio multiplexer") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230111211350.1461860-6-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11arm64: dts: meson-gx: Fix Ethernet MAC address unit nameMartin Blumenstingl
[ Upstream commit 8ed5310356bfa47cc6bb4221ae6b21258c52e3d1 ] Unit names should use hyphens instead of underscores to not cause warnings. Fixes: bfe59f92d306 ("ARM64: dts: amlogic: gxbb: Enable NVMEM") Suggested-by: Vyacheslav Bocharov <adeep@lexina.in> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230111211350.1461860-5-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitiveHeiner Kallweit
commit d182bcf300772d8b2e5f43e47fa0ebda2b767cc4 upstream. The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: 221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller") Reported-by: Peter Suti <peter.suti@streamunlimited.com> Tested-by: Vyacheslav Bocharov <adeep@lexina.in> Tested-by: Peter Suti <peter.suti@streamunlimited.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/c00655d3-02f8-6f5f-4239-ca2412420cad@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22arm64: dts: meson-g12-common: Make mmc host controller interrupts ↵Heiner Kallweit
level-sensitive commit ac8db4cceed218cca21c84f9d75ce88182d8b04f upstream. The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: 4759fd87b928 ("arm64: dts: meson: g12a: add mmc nodes") Tested-by: FUKAUMI Naoki <naoki@radxa.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/27d89baa-b8fa-baca-541b-ef17a97cde3c@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitiveHeiner Kallweit
commit 66e45351f7d6798751f98001d1fcd572024d87f0 upstream. The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: ef8d2ffedf18 ("ARM64: dts: meson-gxbb: add MMC support") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/76e042e0-a610-5ed5-209f-c4d7f879df44@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09arm64: dts: meson: remove CPU opps below 1GHz for SM1 boardsChristian Hewitt
[ Upstream commit fd86d85401c2049f652293877c0f7e6e5afc3bbc ] Amlogic SM1 devices experience CPU stalls and random board wedges when the system idles and CPU cores clock down to lower opp points. Recent vendor kernels include a change to remove 100-250MHz and other distro sources also remove the 500/667MHz points. Unless all 100-667Mhz opps are removed or the CPU governor forced to performance stalls are still observed, so let's remove them to improve stability and uptime. Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09arm64: dts: meson: remove CPU opps below 1GHz for G12B boardsChristian Hewitt
[ Upstream commit 6c4d636bc00dc17c63ffb2a73a0da850240e26e3 ] Amlogic G12B devices experience CPU stalls and random board wedges when the system idles and CPU cores clock down to lower opp points. Recent vendor kernels include a change to remove 100-250MHz and other distro sources also remove the 500/667MHz points. Unless all 100-667Mhz opps are removed or the CPU governor forced to performance stalls are still observed, so let's remove them to improve stability and uptime. Fixes: b96d4e92709b ("arm64: dts: meson-g12b: support a311d and s922x cpu operating points") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220210100638.19130-2-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610Christian Hewitt
[ Upstream commit f26573e2bc9dfd551a0d5c6971f18cc546543312 ] The BL32/TEE reserved-memory region is now inherited from the common family dtsi (meson-g12-common) so we can drop it from board files. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23arm64: dts: meson-g12: add ATF BL32 reserved-memory regionChristian Hewitt
[ Upstream commit 08982a1b3aa2611c9c711d24825c9002d28536f4 ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-3-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23arm64: dts: meson-gx: add ATF BL32 reserved-memory regionChristian Hewitt
[ Upstream commit 76577c9137456febb05b0e17d244113196a98968 ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Suggested-by: Mateusz Krzak <kszaquitto@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27arm64: dts: meson-gxbb-wetek: fix missing GPIO bindingChristian Hewitt
[ Upstream commit c019abb2feba3cbbd7cf7178f8e6499c4fa6fced ] The absence of this binding appears to be harmless in Linux but it breaks Ethernet support in mainline u-boot. So add the binding (which is present in all other u-boot supported GXBB device-trees). Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211012052522.30873-3-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27arm64: dts: meson-gxbb-wetek: fix HDMI in early bootChristian Hewitt
[ Upstream commit 8182a35868db5f053111d5d9d4da8fcb3f99259d ] Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx node to ensure HDMI is powered in the early stages of boot. Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211012052522.30873-2-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17arm64: dts: meson-g12a: Fix the pwm regulator supply propertiesAnand Moon
[ Upstream commit 085675117ecf5e02c4220698fd549024ec64ad2c ] After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs. Changes help link VDDCPU pwm regulator to 12V regulator supply instead of dummy regulator. [ 11.602281] pwm-regulator regulator-vddcpu: Looking up pwm-supply property in node /regulator-vddcpu failed [ 11.602344] VDDCPU: supplied by regulator-dummy [ 11.602365] regulator-dummy: could not add device link regulator.11: -ENOENT [ 11.602548] VDDCPU: 721 <--> 1022 mV at 1022 mV, enabled Fixes: e9bc0765cc12 ("arm64: dts: meson-g12a: enable DVFS on G12A boards") Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210919202918.3556-2-linux.amoon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10arm64: dts: amlogic: meson-g12: Set FL-adj property valueSerge Semin
[ Upstream commit 7386a559caa6414e74578172c2bc4e636d6bd0a0 ] In accordance with the DWC USB3 bindings the property is supposed to have uint32 type. It's erroneous from the DT schema and driver points of view to declare it as boolean. As Neil suggested set it to 0x20 so not break the platform and to make the dtbs checker happy. Link: https://lore.kernel.org/linux-usb/20201010224121.12672-16-Sergey.Semin@baikalelectronics.ru/ Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes") Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201210091756.18057-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30arm64: dts: meson: g12a: x96-max: fix PHY deassert timing requirementsStefan Agner
[ Upstream commit 3d07c3b3a886fefd583c1b485b5e4e3c4e2da493 ] According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. On similar boards with the same PHY this fixes an issue where Ethernet link would not come up when using ip link set down/up. Fixes: ed5e8f689154 ("arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/12506964ca5d5f936579a280ad0a7e7f9a0a2d4c.1607363522.git.stefan@agner.ch Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30arm64: dts: meson: fix PHY deassert timing requirementsStefan Agner
[ Upstream commit c183c406c4321002fe85b345b51bc1a3a04b6d33 ] According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. This fixes an issue seen on ODROID-C2 where the Ethernet link doesn't come up when using ip link set down/up: [ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down [ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36) [ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma [ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed [ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed Fixes: f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/4a322c198b86e4c8b3dda015560a683babea4d63.1607363522.git.stefan@agner.ch Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30arm64: dts: meson-sm1: fix typo in opp tableDongjin Kim
[ Upstream commit b6a1c8a1eaa73b1e2ae251399308e9445d74cef7 ] The freqency 1512000000 should be 1500000000. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS") Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201130060320.GA30098@anyang-linuxfactory-or-kr Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30arm64: dts: meson: fix spi-max-frequency on Khadas VIM2Artem Lapkin
[ Upstream commit b6c605e00ce8910d7ec3d9a54725d78b14db49b9 ] The max frequency for the w25q32 (VIM v1.2) and w25q128 (VIM v1.4) spifc chip should be 104Mhz not 30MHz. Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2") Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201125024001.19036-1-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10arm64: dts: meson: add missing g12 rng clockScott K Logan
[ Upstream commit a1afbbb0285797e01313779c71287d936d069245 ] This adds the missing perpheral clock for the RNG for Amlogic G12. As stated in amlogic,meson-rng.yaml, this isn't always necessary for the RNG to function, but is better to have in case the clock is disabled for some reason prior to loading. Signed-off-by: Scott K Logan <logans@cottsay.net> Suggested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/520a1a8ec7a958b3d918d89563ec7e93a4100a45.camel@cottsay.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29arm64: dts: meson: vim3: correct led polarityJerome Brunet
[ Upstream commit 1f9d87d08e4a2299e86f8a1600aedf87ecd3b636 ] The LEDs on the vim3 are active when the gpio is high, not low. Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200803141850.172704-1-jbrunet@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequencyNeil Armstrong
[ Upstream commit b2037dafcf082cd24b88ae9283af628235df36e1 ] When starting at 744MHz, the Mali 450 core crashes on S805X based boards: lima d00c0000.gpu: IRQ ppmmu3 not found lima d00c0000.gpu: IRQ ppmmu4 not found lima d00c0000.gpu: IRQ ppmmu5 not found lima d00c0000.gpu: IRQ ppmmu6 not found lima d00c0000.gpu: IRQ ppmmu7 not found Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.2+ #492 Hardware name: Libre Computer AML-S805X-AC (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : lima_gp_init+0x28/0x188 ... Call trace: lima_gp_init+0x28/0x188 lima_device_init+0x334/0x534 lima_pdev_probe+0xa4/0xe4 ... Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Reverting to a safer 666Mhz frequency on the S805X that doesn't use the GP0 PLL makes it more stable. Fixes: fd47716479f5 ("ARM64: dts: add S805X based P241 board") Fixes: 0449b8e371ac ("arm64: dts: meson: add libretech aml-s805x-ac board") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200618132737.14243-1-narmstrong@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22arm64: dts: meson: add missing gxl rng clockJerome Brunet
[ Upstream commit 95ca6f06dd4827ff63be5154120c7a8511cd9a41 ] The peripheral clock of the RNG is missing for gxl while it is present for gxbb. Fixes: 1b3f6d148692 ("ARM64: dts: meson-gx: add clock CLKID_RNG0 to hwrng node") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200617125346.1163527-1-jbrunet@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controllerNeil Armstrong
[ Upstream commit a81bcfb6ac20cdd2e8dec3da14c8bbe1d18f6321 ] When high load on the DWC3 SuperSpeed port, the controller crashes with: [ 221.141621] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. [ 221.157631] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 [ 221.157635] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead [ 221.159901] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. [ 221.159961] hub 2-1.1:1.0: hub_ext_port_status failed (err = -22) [ 221.160076] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up [ 221.165946] usb 2-1.1-port1: cannot reset (err = -22) Setting the parkmode_disable_ss_quirk quirk fixes the issue. Reported-by: Tim <elatllat@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Cc: Jianxin Pan <jianxin.pan@amlogic.com> CC: Dongjin Kim <tobetter@gmail.com> Link: https://lore.kernel.org/r/20200221091532.8142-4-narmstrong@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24arm64: dts: meson: fixup SCP sram nodesNeil Armstrong
[ Upstream commit 9ecded10b4b6af238da0c86197b0418912e7513e ] The GX and AXG SCP sram nodes were using invalid compatible and node names for the sram entries. Fixup the sram entries node names, and use proper compatible for them. It notably fixes: sram@c8000000: 'scp-shmem@0', 'scp-shmem@200' do not match any of the regexes: '^([a-z]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+' Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326165958.19274-3-narmstrong@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20arm64: dts: meson-g12-common: fix dwc2 clock namesNeil Armstrong
commit e4f634d812634067b0c661af2e3cecfd629c89b8 upstream. Use the correct dwc2 clock name. Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200326160857.11929-3-narmstrong@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status propertyNeil Armstrong
commit 5ac0869fb39b1c1ba84d4d75c550f82e0bf44c96 upstream. In the process of moving the VIM3 audio nodes to a G12B specific dtsi for enabling the SM1 based VIM3L, the frddr_a status = "okay" property got dropped. This re-enables the frddr_a node to fix audio support. Fixes: 4f26cc1c96c9 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191018140216.4257-1-narmstrong@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12arm64: dts: meson: fix gxm-khadas-vim2 wifiChristian Hewitt
commit 146033562e7e5d1c9aae9653986806664995f1d5 upstream. before [6.418252] brcmfmac: F1 signature read @0x18000000=0x17224356 [6.435663] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [6.551259] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed [6.551275] brcmfmac: brcmf_sdio_verifymemory: error -84 on reading 2048 membytes at 0x00184000 [6.551352] brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed after [6.657165] brcmfmac: F1 signature read @0x18000000=0x17224356 [6.660807] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [6.918643] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [6.918734] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [6.922724] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Jun 16 2015 14:25:06 version 7.35.184.r1 (TOB) (r559293) FWID 01-b22ae69c Fixes: adc52bf7ef16 ("arm64: dts: meson: fix mmc v2 chips max frequencies") Suggested-by: Art Nikpal <email2tema@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/1582212790-11402-1-git-send-email-christianshewitt@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12arm64: dts: meson-sm1-sei610: add missing interrupt-namesGuillaume La Roque
commit 5bea1336ed2c939328999c64de28792e8dc0699b upstream. add missing "host-wakeup interrupt names Fixes: 30388cc07572 ("arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt") Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200117133423.22602-1-glaroque@baylibre.com Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-05arm64: dts: meson-sm1-sei610: add gpio bluetooth interruptGuillaume La Roque
[ Upstream commit 30388cc075720aa0af4f2cb5933afa1f8f39d313 ] add gpio irq to support interrupt trigger mode. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23arm64: dts: meson-gxl-s905x-khadas-vim: fix gpio-keys-polled nodeChristian Hewitt
commit d5f6fa904ecbadbb8e9fa6302b0fc165bec0559a upstream. Fix DTC warnings: arch/arm/dts/meson-gxl-s905x-khadas-vim.dtb: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Fixes: e15d2774b8c0 ("ARM64: dts: meson-gxl: add support for the Khadas VIM board") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23arm64: dts: meson: g12: fix audio fifo reg sizeJerome Brunet
commit 22c4b148a0a1085e57a470e6f7dc515cf08f5a5c upstream. The register region size initially is too small to access all the fifo registers. Fixes: c59b7fe5aafd ("arm64: dts: meson: g12a: add audio fifos") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23arm64: dts: meson: axg: fix audio fifo reg sizeJerome Brunet
commit 301b94d434ac3a3cd576a4bc1053cc243d6bd841 upstream. The register region size initially is too small to access all the fifo registers. Fixes: f2b8f6a93357 ("arm64: dts: meson-axg: add audio fifos") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power failed warningAnand Moon
commit 72c9b5f6f75fbc6c47e0a2d02bc3838a2a47c90a upstream. usb_otg bus needs to get initialize from the u-boot to be configured to used as power source to SBC or usb otg port will get configured as host device. Right now this support is missing in the u-boot and phy driver so to avoid power failed warning, we would disable this feature until proper fix is found. [ 2.716048] phy phy-c0000000.phy.0: USB ID detect failed! [ 2.720186] phy phy-c0000000.phy.0: phy poweron failed --> -22 [ 2.726001] ------------[ cut here ]------------ [ 2.730583] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2039 _regulator_put+0x3c/0xe8 [ 2.738983] Modules linked in: [ 2.742005] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.2.9-1-ARCH #1 [ 2.748643] Hardware name: Hardkernel ODROID-C2 (DT) [ 2.753566] Workqueue: events deferred_probe_work_func [ 2.758649] pstate: 60000005 (nZCv daif -PAN -UAO) [ 2.763394] pc : _regulator_put+0x3c/0xe8 [ 2.767361] lr : _regulator_put+0x3c/0xe8 [ 2.771326] sp : ffff000011aa3a50 [ 2.774604] x29: ffff000011aa3a50 x28: ffff80007ed1b600 [ 2.779865] x27: ffff80007f7036a8 x26: ffff80007f7036a8 [ 2.785126] x25: 0000000000000000 x24: ffff000011a44458 [ 2.790387] x23: ffff000011344218 x22: 0000000000000009 [ 2.795649] x21: ffff000011aa3b68 x20: ffff80007ed1b500 [ 2.800910] x19: ffff80007ed1b500 x18: 0000000000000010 [ 2.806171] x17: 000000005be5943c x16: 00000000f1c73b29 [ 2.811432] x15: ffffffffffffffff x14: ffff0000117396c8 [ 2.816694] x13: ffff000091aa37a7 x12: ffff000011aa37af [ 2.821955] x11: ffff000011763000 x10: ffff000011aa3730 [ 2.827216] x9 : 00000000ffffffd0 x8 : ffff000010871760 [ 2.832477] x7 : 00000000000000d0 x6 : ffff0000119d151b [ 2.837739] x5 : 000000000000000f x4 : 0000000000000000 [ 2.843000] x3 : 0000000000000000 x2 : 38104b2678c20100 [ 2.848261] x1 : 0000000000000000 x0 : 0000000000000024 [ 2.853523] Call trace: [ 2.855940] _regulator_put+0x3c/0xe8 [ 2.859562] regulator_put+0x34/0x48 [ 2.863098] regulator_bulk_free+0x40/0x58 [ 2.867153] devm_regulator_bulk_release+0x24/0x30 [ 2.871896] release_nodes+0x1f0/0x2e0 [ 2.875604] devres_release_all+0x64/0xa4 [ 2.879571] really_probe+0x1c8/0x3e0 [ 2.883194] driver_probe_device+0xe4/0x138 [ 2.887334] __device_attach_driver+0x90/0x110 [ 2.891733] bus_for_each_drv+0x8c/0xd8 [ 2.895527] __device_attach+0xdc/0x160 [ 2.899322] device_initial_probe+0x24/0x30 [ 2.903463] bus_probe_device+0x9c/0xa8 [ 2.907258] deferred_probe_work_func+0xa0/0xf0 [ 2.911745] process_one_work+0x1b4/0x408 [ 2.915711] worker_thread+0x54/0x4b8 [ 2.919334] kthread+0x12c/0x130 [ 2.922526] ret_from_fork+0x10/0x1c [ 2.926060] ---[ end trace 51a68f4c0035d6c0 ]--- [ 2.930691] ------------[ cut here ]------------ [ 2.935242] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2039 _regulator_put+0x3c/0xe8 [ 2.943653] Modules linked in: [ 2.946675] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G W 5.2.9-1-ARCH #1 [ 2.954694] Hardware name: Hardkernel ODROID-C2 (DT) [ 2.959613] Workqueue: events deferred_probe_work_func [ 2.964700] pstate: 60000005 (nZCv daif -PAN -UAO) [ 2.969445] pc : _regulator_put+0x3c/0xe8 [ 2.973412] lr : _regulator_put+0x3c/0xe8 [ 2.977377] sp : ffff000011aa3a50 [ 2.980655] x29: ffff000011aa3a50 x28: ffff80007ed1b600 [ 2.985916] x27: ffff80007f7036a8 x26: ffff80007f7036a8 [ 2.991177] x25: 0000000000000000 x24: ffff000011a44458 [ 2.996439] x23: ffff000011344218 x22: 0000000000000009 [ 3.001700] x21: ffff000011aa3b68 x20: ffff80007ed1bd00 [ 3.006961] x19: ffff80007ed1bd00 x18: 0000000000000010 [ 3.012222] x17: 000000005be5943c x16: 00000000f1c73b29 [ 3.017484] x15: ffffffffffffffff x14: ffff0000117396c8 [ 3.022745] x13: ffff000091aa37a7 x12: ffff000011aa37af [ 3.028006] x11: ffff000011763000 x10: ffff000011aa3730 [ 3.033267] x9 : 00000000ffffffd0 x8 : ffff000010871760 [ 3.038528] x7 : 00000000000000fd x6 : ffff0000119d151b [ 3.043790] x5 : 000000000000000f x4 : 0000000000000000 [ 3.049051] x3 : 0000000000000000 x2 : 38104b2678c20100 [ 3.054312] x1 : 0000000000000000 x0 : 0000000000000024 [ 3.059574] Call trace: [ 3.061991] _regulator_put+0x3c/0xe8 [ 3.065613] regulator_put+0x34/0x48 [ 3.069149] regulator_bulk_free+0x40/0x58 [ 3.073203] devm_regulator_bulk_release+0x24/0x30 [ 3.077947] release_nodes+0x1f0/0x2e0 [ 3.081655] devres_release_all+0x64/0xa4 [ 3.085622] really_probe+0x1c8/0x3e0 [ 3.089245] driver_probe_device+0xe4/0x138 [ 3.093385] __device_attach_driver+0x90/0x110 [ 3.097784] bus_for_each_drv+0x8c/0xd8 [ 3.101578] __device_attach+0xdc/0x160 [ 3.105373] device_initial_probe+0x24/0x30 [ 3.109514] bus_probe_device+0x9c/0xa8 [ 3.113309] deferred_probe_work_func+0xa0/0xf0 [ 3.117796] process_one_work+0x1b4/0x408 [ 3.121762] worker_thread+0x54/0x4b8 [ 3.125384] kthread+0x12c/0x130 [ 3.128575] ret_from_fork+0x10/0x1c [ 3.132110] ---[ end trace 51a68f4c0035d6c1 ]--- [ 3.136753] dwc2: probe of c9000000.usb failed with error -22 Fixes: 5a0803bd5ae2 ("ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes") Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09arm64: dts: meson-gxm-khadas-vim2: fix uart_A bluetooth nodeChristian Hewitt
commit 388a2772979b625042524d8b91280616ab4ff5ee upstream. Fixes: 33344e2111a3 ("arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09arm64: dts: meson-gxl-s905x-khadas-vim: fix uart_A bluetooth nodeChristian Hewitt
commit 1c6d575574ec87dbccf7af20ef9dc0df02614069 upstream. Fixes: dd5297cc8b8b ("arm64: dts: meson-gxl-s905x-khadas-vim enable Bluetooth") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-29arm64: dts: meson-sm1-sei610: add stdout-path property backNeil Armstrong
The commit d4609acce187 ("arm64: dts: meson-sm1-sei610: enable DVFS") incorrectly removed the chosen node and the stdout-path property. Add these back. Fixes: d4609acce187 ("arm64: dts: meson-sm1-sei610: enable DVFS") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: enable DVFSNeil Armstrong
This enables DVFS for the Amlogic SM1 based SEI610 board by: - Adding the SM1 SoC OPPs taken from the vendor tree - Selecting the SM1 Clock controller instead of the G12A one - Adding the CPU rail regulator, PWM and OPPs for each CPU nodes. Each power supply can achieve 0.69V to 1.05V using a single PWM output clocked at 666KHz with an inverse duty-cycle. DVFS has been tested by running the arm64 cpuburn at [1] and cycling between all the possible cpufreq translations of the cpu cluster and checking the final frequency using the clock-measurer, script at [2]. [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: khadas-vim3: add support for the SM1 based VIM3LNeil Armstrong
Add the Amlogic SM1 based Khadas VIM3L, sharing all the same features as the G12B based VIM3, but: - a different DVFS support since only a single cluster is available - audio is still not available on SM1 Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsiNeil Armstrong
To prepare support of the Amlogic SM1 based Khadas VIM3, move the non-G12B specific nodes (all except DVFS and Audio) to a new meson-khadas-vim3.dtsi Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson: g12a: add reset to tdm formattersJerome Brunet
Add the reset to the TDM formatters of the g12a. This helps with channel mapping when a playback/capture uses more than 1 lane. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson: g12a: audio clock controller provides resetsJerome Brunet
The clock controller dedicated to audio clocks also provides reset lines on the g12 SoC family Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-27 12:54:04 +0000