aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/hx4700.c
AgeCommit message (Collapse)Author
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-04Merge tag 'spi-v5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly quiet release for SPI, the biggest thing is the conversion to use GPIO descriptors which is now 90% done but still needs some stragglers converting. Summary: - Support for inter-word delays - Conversion of the core and most drivers to use GPIO descriptors for GPIO controlled chip selects - New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum" * tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (104 commits) spi: sh-msiof: Restrict bits per word to 8/16/24/32 on R-Car Gen2/3 spi: sifive: Remove redundant dev_err call in sifive_spi_probe() spi: sifive: Remove spi_master_put in sifive_spi_remove() spi: spi-gpio: fix SPI_CS_HIGH capability spi: pxa2xx: Setup maximum supported DMA transfer length spi: sifive: Add driver for the SiFive SPI controller spi: sifive: Add DT documentation for SiFive SPI controller spi: sprd: Add a prefix for SPI DMA channel macros spi: sprd: spi: sprd: Add DMA mode support dt-bindings: spi: Add the DMA properties for the SPI dma mode spi: sprd: Add the SPI irq function for the SPI DMA mode dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible spi: use gpio[d]_set_value_cansleep for setting chipselect GPIO spi: gpio: Advertise support for SPI_CS_HIGH spi: sh-msiof: Replace spi_master by spi_controller spi: sh-hspi: Replace spi_master by spi_controller spi: rspi: Replace spi_master by spi_controller spi: atmel-quadspi: add support for sam9x60 qspi controller dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60 spi: atmel-quadspi: add support for named peripheral clock ...
2019-02-06regulator: gpio: Convert to use descriptorsLinus Walleij
This converts the GPIO regulator driver to use decriptors only. We have to let go of the array gpio handling: the fetched descriptors are handled individually anyway, and the array retrieveal function does not make it possible to retrieve each GPIO descriptor with unique flags. Instead get them one by one. We request the "enable" GPIO separately as before, and make sure that this line is requested as nonexclusive since enable lines can be shared and the regulator core expects this. Most users of the GPIO regulator are using device tree. There are two boards in the kernel using the gpio regulator from a non-devicetree path: PXA hx4700 and magician. Make sure to switch these over to use descriptors as well. Cc: Philipp Zabel <p.zabel@pengutronix.de> # Magician Cc: Petr Cvek <petr.cvek@tul.cz> # Magician Cc: Robert Jarzmik <robert.jarzmik@free.fr> # PXA Cc: Paul Parsons <lost.distance@yahoo.com> # hx4700 Cc: Kevin Hilman <khilman@baylibre.com> # Meson Cc: Neil Armstrong <narmstrong@baylibre.com> # Meson Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-23pxa2xx: replace spi_master with spi_controllerLubomir Rintel
It's also a slave controller driver now, calling it "master" is slightly misleading. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-20ARM: pxa: hx4700: fix the usb clientRobert Jarzmik
The usb client of the hx4700 is not working because no platform data is declared. Fix it by adding the missing call. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-11-28ARM: pxa: move header file out of I2C realmWolfram Sang
include/linux/i2c is to be deprecated. Move this platform_data to the proper platform_data dir. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-09-28mfd/gpio: Move HTC GPIO driver to GPIO subsystemLinus Walleij
The HTC GPIO driver is a pure GPIO driver and I just can not see what it is doing inside MFD. Let's just move it to GPIO and take this opportunity to move the platform data to <linux/platform_data/gpio-htc-egpio.h> Cc: arm@kernel.org Cc: Russell King <linux@armlinux.org.uk> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01ARM: pxa: make more mach/*.h files localArnd Bergmann
Lots of header files are never included outside of a mach-pxa directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-06ARM: pxa: hx4700: Remove unused field initializersThierry Reding
The ID and period for the backlight PWM are obtained from a PWM lookup table, so the corresponding values don't need to be duplicated into the platform data. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-09-20ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_masterJarkko Nikula
Use for struct pxa2xx_spi_master clock_enable field was removed years ago from the pxa2xx-spi driver by the commit 2f1a74e5a2de ("[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()"). Therefore remove it from structure definition, documentation and from couple affected board files. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2014-12-26hx4700: regulator: declare full constraintsMartin Vajnar
Since the removal of CONFIG_REGULATOR_DUMMY option, the touchscreen stopped working. This patch enables the "replacement" for REGULATOR_DUMMY and allows the touchscreen to work even though there is no regulator for "vcc". Cc: stable@vger.kernel.org Signed-off-by: Martin Vajnar <martin.vajnar@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2014-05-21ARM: pxa: hx4700: use PWM_LOOKUP to initialize struct pwm_lookupAlexandre Belloni
Use the new variant of the PWM_LOOKUP macro to initialize the PWM lookup table. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21ARM: pxa: hx4700: initialize all the struct pwm_lookup membersAlexandre Belloni
Instead of relying on the .pwm_period_ns member of the pwm-backlight driver's platform data, the PWM period can be retrieved from the PWM lookup table. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-16ARM: pxa: Initialize PWM backlight enable_gpio fieldThierry Reding
The GPIO API defines 0 as being a valid GPIO number, so this field needs to be initialized explicitly. A special case is the Palm Tungsten|C board. Since it doesn't use any quirks that would require the existing .init() or .exit() hooks it can simply use the new enable_gpio field. Signed-off-by: Thierry Reding <treding@nvidia.com>
2012-12-24ARM: delete struct sys_timerStephen Warren
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-28ARM: pxa: hx4700: Fix backlight PWM device numberPaul Parsons
Recent changes to PXA PWM support changed the PXA27X PWM device numbering scheme. The linux-3.5 PXA PWM driver followed the hardware numbering scheme for the 4 PWMs, while the linux-3.6-rc1 PXA PWM driver has adopted a linear numbering scheme: Address Hardware 3.5 pwm_id 3.6-rc1 pwm_id 0x40b00000 PWM0 0 0 0x40b00010 PWM2 2 1 0x40c00000 PWM1 1 2 0x40c00010 PWM3 3 3 The hx4700 backlight uses PWM1 at 0x40c00000. Consequently the pwm_id must be changed from 1 to 2. This patch fixes the backlight PWM device number and at the same time moves from the legacy PWM API (pwm_id) to the new PWM API (pwm_lookup). Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-09-14ARM: pxa: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-By: Stefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
2012-07-30Merge tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc board updates from Olof Johansson: "This branch contains board updates, mostly for shmobile, but also a couple for PXA. The shmobile platforms are still in the early stages of DT enablement, so there's a bit more updates here than we'd ideally want to see: - regulator updates to provide some fixed regulators on several boards - gpio support updates for multiple boards - misc updates for recently-introduced boards armadillo800eva and kzm9g - defconfig updates" * tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: shmobile: kzm9g: defconfig enable INOTIFY_USER ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace ARM: shmobile: armadillo800eva: A3SP domain includes USB ARM: shmobile: armadillo800eva: A4LC domain includes LCDC ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode ARM: mach-shmobile: kzm9d: Add defconfig ARM: mach-shmobile: select the fixed regulator driver on several boards ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9g ARM: pxa: hx4700: Use DEFINE_RES_* macros consistently ARM: pxa: remove eseries.h ARM: mach-shmobile: add fixed voltage regulators to marzen ARM: mach-shmobile: add fixed voltage regulators to kzm9g ARM: mach-shmobile: add fixed voltage regulators to kzm9d ARM: mach-shmobile: add fixed voltage regulators to kota2 ARM: mach-shmobile: add fixed voltage regulators to g4evm ARM: mach-shmobile: add fixed voltage regulators to bonito ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva ARM: mach-shmobile: add fixed voltage regulators to ap4evb ARM: mach-shmobile: add fixed voltage regulators to ag5evm ARM: mach-shmobile: add 3.3V and 1.8V fixed regulators to mackerel ...
2012-07-01ARM: pxa: hx4700: Use DEFINE_RES_* macros consistentlyPaul Parsons
This patch replaces the remaining inline struct resource definitions with equivalent DEFINE_RES_* macro calls. The source file is reduced in size; the object file is unchanged. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-07-01ARM: pxa: hx4700: Fix basic suspend/resumePaul Parsons
Basic suspend/resume is fixed by ensuring that the PGSR registers are set correctly before sleep mode is entered. In particular four of the active low resets need to be driven high while in sleep mode, otherwise the unit resets itself instead of suspending. Another problem was that the PCFR_GPROD bit is set by the HTC bootloader; this caused GPIO reset (i.e. the reset button) to fail immediately after returning from sleep mode. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-05-18Merge branch 'board-specific' of git://github.com/hzhuang1/linux into ↵Olof Johansson
next/boards * 'board-specific' of git://github.com/hzhuang1/linux: ARM: pxa: hx4700: Add Synaptics NavPoint touchpad ARM: pxa: Use REGULATOR_SUPPLY macro
2012-05-14ARM: pxa: hx4700: Add Synaptics NavPoint touchpadPaul Parsons
This patch adds the Synaptics NavPoint touchpad to the hx4700 platform: 1. Change GPIO23_SSP1_SCLK value in hx4700_pin_config[] from an output to an input, since the NavPoint is connected to SSP in SPI slave mode. 2. Add GPIO102_GPIO (NavPoint power) to hx4700_pin_config[]. 3. Add navpoint platform_device to devices[]. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-05-14ARM: pxa: Use REGULATOR_SUPPLY macroAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Tested-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-05-05ARM: pxa: Add standard UART to hx4700_pin_config[]Paul Parsons
Add the two standard UART signals (GPIO46_STUART_RXD, GPIO47_STUART_TXD) to the initial mfp config table hx4700_pin_config[] passed to pxa2xx_mfp_config(). Although pxa2xx_transceiver_mode() can subsequently set these two signals via its own call to pxa2xx_mfp_config(), pxa2xx_transceiver_mode() is only present when CONFIG_PXA_FICP=y. Hence this patch provides a default mfp config. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-05-03ARM: pxa: hx4700: Add PCMCIA/CF supportPaul Parsons
This patch is part of a set which adds PCMCIA/CF support for the hx4700. This patch modifies asic3_gpio_config[] as follows: 1. Remove ASIC3_GPIOC4_CF_nCD, whose purpose is unknown. 2. Add ASIC3_GPIOD4_CF_nCD, the actual CF card detect GPIO. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-05-03ARM: pxa: hx4700: Enable ASIC3 GPIO as a wakeup sourcePaul Parsons
This patch enables the ASIC3 GPIO (12) as a wakeup source: 1. Set the WAKEUP_ON_EDGE_RISE MFP config bits for GPIO12 in hx4700_pin_config[]. 2. Call gpio_set_wake() for GPIO12. With GPIO12 thus enabled, the mfd/asic3 driver can enable its own GPIOs as wakeup sources by implementing a irq_set_wake() handler. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-05-03ARM: pxa: hx4700: Initialize DS1WM clock_ratePaul Parsons
The asic3 driver now sets the DS1WM clock_rate from the newly added asic3_platform_data clock_rate field. This patch initializes the asic3_platform_data clock_rate field on the hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-29Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixesOlof Johansson
* 'fixes' of git://github.com/hzhuang1/linux: ARM: pxa: fix build issue on stargate2 ARM: pxa: fix build issue on cm-x300 ARM: pxa: fix build failure for regulator consumer in em-x270.c ARM: pxa: fix regulator related build fail in magician_defconfig
2012-03-28ARM: pxa: fix regulator related build fail in magician_defconfigPaul Gortmaker
commit 737f360d5bef5e01c6cfa755dca0b449a154c1e0 (linux-next) "regulator: Remove support for supplies specified by struct device" deletes the field from the struct, but this platform was still trying to set those fields. Delete the assignments. arch/arm/mach-pxa/magician.c:581: error: unknown field 'dev' specified in initializer arch/arm/mach-pxa/magician.c:581: warning: initialization from incompatible pointer type arch/arm/mach-pxa/magician.c:585: error: unknown field 'dev' specified in initializer arch/arm/mach-pxa/magician.c:585: warning: initialization from incompatible pointer type arch/arm/mach-pxa/hx4700.c:683: error: unknown field 'dev' specified in initializer arch/arm/mach-pxa/hx4700.c:683: warning: initialization from incompatible pointer type arch/arm/mach-pxa/hx4700.c:687: error: unknown field 'dev' specified in initializer arch/arm/mach-pxa/hx4700.c:687: warning: initialization from incompatible pointer type Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-27Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: driver specific updates" from Arnd Bergmann: "These are all specific to some driver. They are typically the platform side of a change in the drivers directory, such as adding a new driver or extending the interface to the platform. In cases where there is no maintainer for the driver, or the maintainer prefers to have the platform changes in the same branch as the driver changes, the patches to the drivers are included as well. A much smaller set of driver updates that depend on other branches getting merged first will be sent later. The new export of tegra_chip_uid conflicts with other changes in fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED conflicts with the cleanup of the interrupt handling of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up aforementioned trivial conflicts. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci mmc: sdhci-s3c: add platform data for the second capability ARM: SAMSUNG: support the second capability for samsung-soc ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1 ARM: EXYNOS: Enable MDMA driver regulator: Remove bq24022 regulator driver rtc: sa1100: add OF support pxa: magician/hx4700: Convert to gpio-regulator from bq24022 ARM: OMAP3+: SmartReflex: fix error handling ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API ARM: OMAP3+: SmartReflex: micro-optimization for sanity check ARM: OMAP3+: SmartReflex: misc cleanups ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata() ARM: OMAP3+: hwmod: add SmartReflex IRQs ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register ARM: OMAP3+: SmartReflex: Add a shutdown hook ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP ... Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-tegra/fuse.c drivers/rtc/rtc-sa1100.c
2012-03-15Merge branch 'board-specific' of git://github.com/hzhuang1/linux into ↵Arnd Bergmann
next/boards * 'board-specific' of git://github.com/hzhuang1/linux: pxa/hx4700: Remove pcmcia platform_device structure ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% ARM: pxa/hx4700: Remove unwanted request for GPIO105 (update to 3.3-rc7) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-14pxa/hx4700: Remove pcmcia platform_device structurePaul Parsons
The existing pcmcia platform_device structure is not used and is not needed by the pending hx4700 PCMCIA/CF support. So let's remove it. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-14ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35%Paul Parsons
Drive the two Bluetooth UART output GPIOs (GPIO43_BTUART_TXD, GPIO45_BTUART_RTS) LOW during sleep mode instead of HIGH. This reduces sleep mode battery discharge from approximately 46 mA to approximately 30 mA. Signed-off-by: Oliver Winker <oliver@oli1170.net> Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-14ARM: pxa/hx4700: Remove unwanted request for GPIO105Paul Parsons
GPIO105 (nIR_ON) is requested twice: first in gpio_request_array(), then in pxa_irda_probe(). Consequently the second request fails with EBUSY: pxa2xx-ir: probe of pxa2xx-ir failed with error -16 This patch removes the first request, allowing pxa_irda_probe() to succeed. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-10Merge branch 'board' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards * 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: add minimal support for Nokia RM-696 ARM: OMAP: enable Bluetooth on the PandaBoard ARM: OMAP: pandora: add support for backlight and poweroff ARM: OMAP4: board-4430sdp: don't initialize value that is never used ARM: OMAP3: cm-t3517: add EMAC support ARM: OMAP: move generic EMAC init to separate file ARM: OMAP3: RX-51: add explicit mux configuration of tsc2005 control gpios ARM: OMAP: Add omap_reserve functionality (includes sync-up to 3.3-rc6)
2012-03-06pxa: magician/hx4700: Convert to gpio-regulator from bq24022Heiko Stübner
The bq24022 on these machines is a very simple regulator using gpios. One provides the on/off functionality and a second one is used to change the current between 100 and 500 mA. This functionality can also be provided by the more generic gpio-regulator. Therefore convert both machines which makes it possible to remove the bq24022 driver later on. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-28pxa/hx4700: Add ASIC3 LED supportPaul Parsons
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-28pxa/hx4700: Correct StrataFlash block size discoveryPaul Parsons
The HP iPAQ hx4700 has 128Mb of flash provided by two Intel StrataFlash devices. The hx4700 platform configuration defines a single 128Mb flash resource, resulting in the MTD physmap-flash driver probing the first device only and presuming the second device is identical: physmap platform flash device: 08000000 at 00000000 physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008816 physmap-flash: Found 2 x16 devices at 0x4000000 in 32-bit bank <snip> erase region 0: offset=0x0,size=0x10000,blocks=4 erase region 1: offset=0x40000,size=0x40000,blocks=255 erase region 2: offset=0x4000000,size=0x10000,blocks=4 erase region 3: offset=0x4040000,size=0x40000,blocks=255 physmap-flash: 2 set(s) of 2 interleaved chips --> 32 partitions of 4096 KiB Unfortunately the two devices are not identical. The first has a device ID of 0x8816, identifying a bottom parameter device. The second has a device ID of 0x8813, identifying a top parameter device. By not probing the second device, physmap-flash does not discover the correct block sizes. This patch splits the configuration into two 64Mb flash resources, forcing physmap-flash to probe both devices and thus discover the correct block sizes: physmap platform flash device: 04000000 at 00000000 physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008816 <snip> erase region 0: offset=0x0,size=0x10000,blocks=4 erase region 1: offset=0x40000,size=0x40000,blocks=255 physmap-flash: 1 set(s) of 2 interleaved chips --> 16 partitions of 4096 KiB physmap platform flash device: 04000000 at 04000000 physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008813 <snip> erase region 0: offset=0x0,size=0x40000,blocks=255 erase region 1: offset=0x3fc0000,size=0x10000,blocks=4 physmap-flash: 1 set(s) of 2 interleaved chips --> 16 partitions of 4096 KiB Concatenating MTD devices: (0): "physmap-flash" (1): "physmap-flash" into device "physmap-flash" Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-17pxa/hx4700: add platform device and I2C info for AK4641 codecAxel Lin
The audio on hx4700 needs this to properly work. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-01-09Merge branch 'samsung/driver' into next/driversArnd Bergmann
Conflicts: arch/arm/mach-mxs/include/mach/common.h Pull in previous samsung conflict merges and do a trivial merge of an mxs double-add conflict. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-05ARM: restart: pxa: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-14ARM: pxa: rename gpio_to_irq and irq_to_gpioHaojian Zhuang
Avoid to define gpio_to_irq() and irq_to_gpio() for potential name confliction since multiple architecture will be built together. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-08-21ARM: mach-pxa: convert boot_params to atag_offsetNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-26Merge branch 'next/devel' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
2011-07-12ARM: pxa: enable MULTI_IRQ_HANDLER for all boardsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: pxa/hx4700: use gpio arrays for global gpiosPhilipp Zabel
gpio_request_array() is a functional replacement for hx4700_gpio_request(), which is now obsolete. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-05-20ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a ↵Marc Zyngier
map_info The set_vpp() method provided by physmap passes a map_info back to the platform code, which has little relevance as far as the platform is concerned (this parameter is completely unused). Instead, pass the platform_device, which can be used in the pismo driver to retrieve some important information in a nicer way, instead of the hack that was in place. The empty set_vpp function in board-at572d940hf_ek.c is left untouched, as the board/SoC is scheduled for removal. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-25ARM: pxa/hx4700: bq24022 regulator needs to be enabledPaul Parsons
Add REGULATOR_CHANGE_STATUS flag to hx4700 bq24022 regulator. Without this flag the bq24022 cannot be enabled and the battery will not charge. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Tested-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-21ARM: pxa2xx: reorganize I2C filesSebastian Andrzej Siewior
This patch moves the platform data definition from arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so it can be accessed from x86 the same way as on ARM. This change should make no functional change to the PXA code. The move is verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig pxa910_defconfig Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-01-07Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (77 commits) spi/omap: Fix DMA API usage in OMAP MCSPI driver spi/imx: correct the test on platform_get_irq() return value spi/topcliff: Typo fix threhold to threshold spi/dw_spi Typo change diable to disable. spi/fsl_espi: change the read behaviour of the SPIRF spi/mpc52xx-psc-spi: move probe/remove to proper sections spi/dw_spi: add DMA support spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs spi/dw_spi: Fix too short timeout in spi polling loop spi/pl022: convert running variable spi/pl022: convert busy flag to a bool spi/pl022: pass the returned sglen to the DMA engine spi/pl022: map the buffers on the DMA engine spi/topcliff_pch: Fix data transfer issue spi/imx: remove autodetection spi/pxa2xx: pass of_node to spi device and set a parent device spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes. spi/pxa2xx: Add chipselect support for Sodaville spi/pxa2xx: Consider CE4100's FIFO depth spi/pxa2xx: Add CE4100 support ...