Age | Commit message (Collapse) | Author |
|
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
|
|
Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
out of bus node") moved the "mcc" DT node into the root node, because
it does not have any children using "reg" properties, so does violate
some dtc checks about "simple-bus" nodes.
However this broke the vexpress config-bus code, which walks up the
device tree to find the first node with an "arm,vexpress,site" property.
This gave the wrong result (matching the root node instead of the
motherboard node), so broke the clocks and some other devices for
VExpress boards.
Move the whole node back into its original position. This re-introduces
the dtc warning, but is conceptually the right thing to do. The dtc
warning seems to be overzealous here, there are discussions on fixing or
relaxing this check instead.
Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The truly boring timer and clocksource updates for 5.8:
- Not a single new clocksource or clockevent driver!
- Device tree updates for various chips
- Fixes and improvements and cleanups all over the place"
* tag 'timers-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
dt-bindings: timer: Add renesas,em-sti bindings
clocksource/drivers/timer-versatile: Clear OF_POPULATED flag
clocksource: mips-gic-timer: Mark GIC timer as unstable if ref clock changes
clocksource: mips-gic-timer: Register as sched_clock
clocksource: dw_apb_timer_of: Fix missing clockevent timers
clocksource: dw_apb_timer: Affiliate of-based timer with any CPU
clocksource: dw_apb_timer: Make CPU-affiliation being optional
dt-bindings: timer: Move snps,dw-apb-timer DT schema from rtc
dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema
clocksource/drivers/timer-ti-dm: Do one override clock parent in prepare()
clocksource/drivers/timer-ti-dm: Fix spelling mistake "detectt" -> "detect"
clocksource/drivers/timer-ti-dm: Fix warning for set but not used
clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
clocksource/drivers/timer-ti-32k: Add support for initializing directly
drivers/clocksource/arm_arch_timer: Remove duplicate error message
clocksource/drivers/arc_timer: Remove duplicate error message
clocksource/drivers/rda: drop redundant Kconfig dependency
clocksource/drivers/timer-ti-dm: Fix warning for set but not used
clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
clocksource/drivers/timer-ti-32k: Add support for initializing directly
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt
ARM: Keystone DTS updates for 5.7
Add display support for K2G EVM Board
* tag 'keystone_dts_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-k2g-evm: add HDMI video support
ARM: dts: keystone-k2g: Add DSS node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We can currently sometimes get "RXS timed out" errors and "EOT timed out"
errors with spi transfers.
These errors can be made easy to reproduce by reading the cpcap iio
values in a loop while keeping the CPUs busy by also reading /dev/urandom.
The "RXS timed out" errors we can fix by adding spi-cpol and spi-cpha
in addition to the spi-cs-high property we already have.
The "EOT timed out" errors we can fix by increasing the spi clock rate
to 9.6 MHz. Looks similar MC13783 PMIC says it works at spi clock rates
up to 20 MHz, so let's assume we can pick any rate up to 20 MHz also
for cpcap.
Cc: maemo-leste@lists.dyne.org
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt
ARM: dts: Keystone update for v5.8
- Rename "msmram" node to "sram"
* tag 'keystone_dts_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: Rename "msmram" node to "sram"
Link: https://lore.kernel.org/r/1590638489-12023-2-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The device node name should reflect generic class of a device so rename
the "msmram" node and its children to "sram". This will be also in sync
with upcoming DT schema. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
Enable ethernet wake-on-lan feature for imx6q/dl/qp sabresd
boards since the PHY clock is supplied by external osc.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- Update the imx6qdl gpr property to define gpr register
offset and bit in DT.
- Add imx6sx/imx6ul/imx7d ethernet stop mode property.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.8:
- A series from Anson Huang updating SRC devices to match bindings
schema definition.
- Correct CPU supply name and add cpu1 supply for i.MX7D.
- Convert thermal device to use nvmem interface to get fuse data
for imx6qdl and imx6sl.
- A series from Tim Harvey to update imx6qdl-gw devices, adding support
of LSM9DS1 IIO imu/magn, USB OTG, bcm4330-bt, etc.
- Add input MUX for ENET2 MDIO into IMX7D pin functions.
- Misc random device addition or update.
* tag 'imx-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
ARM: dts: imx53-cx9020: Group port definitions for the dvi-converter
ARM: dts: imx5: make src node name generic
ARM: dts: imx50: Add src node interrupt
ARM: dts: imx: make src node name generic
ARM: dts: imx7d-pinfunc: add input mux for ENET2 mdio
ARM: dts: imx6sl: Use nvmem interface to get fuse data
ARM: dts: imx6qdl: Use nvmem interface to get fuse data
ARM: dts: imx6qdl-gw5910: fix wlan regulator
ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt
ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn support
ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn support
ARM: dts: imx53: Add src node interrupt
ARM: dts: imx51: Add src node interrupt
ARM: dts: imx50: Remove unused iomuxc-gpr node
ARM: dts: imx6qdl-gw552x: add USB OTG support
ARM: dts: imx6-sr-som: add ethernet PHY configuration
arm: dts: ls1021atwr: Add QSPI node properties
ARM: dts: e60k02: add interrupt for PMIC
ARM: dts: colibri: introduce device trees with UHS-I support
ARM: dts: imx7d: Add cpu1 supply
...
Link: https://lore.kernel.org/r/20200523032516.11016-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: Amlogic updates for v5.8
- eth PHY and USB PHY updates
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id"
ARM: dts: meson: Add the Ethernet "timing-adjustment" clock
ARM: dts: meson8m2: Use the Meson8m2 specific USB2 PHY compatible
ARM: dts: meson: add the gadget mode properties to the USB0 controller
Link: https://lore.kernel.org/r/5ec6f524.1c69fb81.b979a.ae15@mx.google.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Few cpsw related dts fixes for omaps
Recent cpsw driver changes exposed few regressions in the cpsw related
dts configuration that would be good to fix:
- Few more boards still need to be updated to use rgmii-rxid phy caused
by the fallout from commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode
support for the KSZ9031 PHY" as the rx delay is now disabled unless we
use rgmii-rxid.
- On dm814x we have been using a wrong clock for mdio that now can produce
external abort on some boards
* tag 'omap-for-v5.7/cpsw-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix wrong mdio clock for dm814x
ARM: dts: am437x: fix networking on boards with ksz9031 phy
ARM: dts: am57xx: fix networking on boards with ksz9031 phy
Link: https://lore.kernel.org/r/pull-1589472123-367692@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
System timer changes for omaps for v5.8 merge window
This series of changes finally gets the legacy omap dual-mode timer and
32k counter system timer updated to use drivers/clocksource and device
tree data. And we can now remove the unused legacy platform data.
These changes are based on an immutable clocksource branch set up by
Daniel Lezcano.
* tag 'omap-for-v5.8/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
ARM: dts: Configure system timers for omap3
ARM: dts: Configure system timers for omap5 and dra7
ARM: dts: Configure system timers for omap4
ARM: dts: Configure system timers for am437x
ARM: dts: Configure system timers for am335x
ARM: OMAP2+: Add omap_init_time_of()
bus: ti-sysc: Ignore timer12 on secure omap3
clk: ti: dm816: enable sysclk6_ck on init
clocksource/drivers/timer-ti-dm: Fix warning for set but not used
clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
clocksource/drivers/timer-ti-32k: Add support for initializing directly
Link: https://lore.kernel.org/r/pull-1590169577-735045@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.8 merge window
Rather busy cycle. We have a total 99 non-merge commits going into v5.8
merge window. The majority of the changes are in dwc3 this around (31.7%
of all changes). It's composed mostly Thinh's recent updates to get dwc3
to behave correctly with stream transfers. We have also have Roger's for
Keystone platforms and Neil's updates for the meson glue layer.
Apart from those, we have the usual set of non-critical fixes, new
device IDs, spelling fixes all over the place.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits)
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
usb: dwc3: gadget: Check for prepared TRBs
usb: gadget: Fix issue with config_ep_by_speed function
usb: cdns3: ep0: delete the redundant status stage
usb: dwc2: Update Core Reset programming flow.
usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe()
usb: gadget: fix potential double-free in m66592_probe.
usb: cdns3: Fix runtime PM imbalance on error
usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
usb: dwc3: Increase timeout for CmdAct cleared by device controller
USB: dummy-hcd: use configurable endpoint naming scheme
usb: cdns3: gadget: assign interrupt number to USB gadget structure
usb: gadget: core: sync interrupt before unbind the udc
arm64: dts: qcom: sc7180: Add interconnect properties for USB
arm64: dts: qcom: sdm845: Add interconnect properties for USB
dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
ARM: dts: at91: Remove the USB EP child node
dt-bindings: usb: atmel: Mark EP child node as deprecated
...
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.7, please pull the following:
- Vincent fixes the polarity of the ACT LED on the Raspberry Pi Zero W
board
- Hamish fixes the ARM PPI interrupts sensitivy for the Hurricane 2
SoCs
* tag 'arm-soc/for-5.7/devicetree-fixes-part2-v2' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: HR2: Fix PPI interrupt types
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
Link: https://lore.kernel.org/r/20200524203714.17035-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The endpoint configuration used to be stored in the device tree,
however the configuration depend on the "version" of the controller
itself.
Then the EP child node are useless and describe as deprecated in the
documentation binding: remove all the nodes from the SoC device tree
file. Remove also the #address-cells and #size-cells properties that
are no longer needed.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.7, round 2:
One imx6q-bx50v3 device tree change to fix an issue, attempting atomic
modeset while using HDMI and display port at the same time causes LDB
clock programming to destroy the programming of HDMI.
* tag 'imx-fixes-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts/imx6q-bx50v3: Set display interface clock parents
Link: https://lore.kernel.org/r/20200521150719.GB24084@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
These were queued for v5.7 as bugfixes, merge them
here as well to resolve the conflicts.
* mmp/fixes:
ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
ARM: dts: mmp3-dell-ariel: Fix the SPI devices
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
These three fixes should make it into linux-5.7 and
also into the branch for other mmp dt changes for v5.8,
so I created a branch for them.
* mmp/fixes:
ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
ARM: dts: mmp3-dell-ariel: Fix the SPI devices
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"usb-nop-xceiv" is good enough if we don't lose the configuration done
by the firmware, but we'd really prefer a real driver.
Unfortunately, the PHY core is odd in that when the node is compatible
with "usb-nop-xceiv", it ignores the other compatible strings. Let's
just remove it.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
I've managed to get about everything wrong while digging these out of
OEM's board file.
Correct the bus numbers, the exact model of the NOR flash, polarity of
the chip selects and align the SPI frequency with the data sheet.
Tested that it works now, with a slight fix to the PXA SSP driver.
Link: https://lore.kernel.org/r/20200419171157.672999-16-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Clocks are in fact slightly different on MMP3. In particular, PLL2 is
fixed to a different frequency, there's an extra PLL3, and the GPU
clocks are configured differently.
Link: https://lore.kernel.org/r/20200419171157.672999-15-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There's one extra SDHCI on MMP3, used by the internal SD card on OLPC
XO-4. Add it to the device tree.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The node name preferred by mmc-controller.yaml binding spec is "mmc":
berlin2-sony-nsz-gs7.dt.yaml: sdhci@ab0000: $nodename:0:
'sdhci@ab0000' does not match '^mmc(@.*)?$'
berlin2-sony-nsz-gs7.dt.yaml: sdhci@ab0800: $nodename:0:
'sdhci@ab0800' does not match '^mmc(@.*)?$'
berlin2-sony-nsz-gs7.dt.yaml: sdhci@ab1000: $nodename:0:
'sdhci@ab1000' does not match '^mmc(@.*)?$'
berlin2cd-google-chromecast.dt.yaml: sdhci@ab0000: $nodename:0:
'sdhci@ab0000' does not match '^mmc(@.*)?$'
berlin2cd-valve-steamlink.dt.yaml: sdhci@ab0000: $nodename:0:
'sdhci@ab0000' does not match '^mmc(@.*)?$'
berlin2q-marvell-dmp.dt.yaml: sdhci@ab0000: $nodename:0:
'sdhci@ab0000' does not match '^mmc(@.*)?$'
berlin2q-marvell-dmp.dt.yaml: sdhci@ab0800: $nodename:0:
'sdhci@ab0800' does not match '^mmc(@.*)?$'
berlin2q-marvell-dmp.dt.yaml: sdhci@ab1000: $nodename:0:
'sdhci@ab1000' does not match '^mmc(@.*)?$'
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are better generic ones and the validation is going to complain:
mmp3-dell-ariel.dt.yaml: hsic@f0001000: $nodename:0: 'hsic@f0001000'
does not match '^usb(@.*)?'
mmp3-dell-ariel.dt.yaml: hsic@f0002000: $nodename:0: 'hsic@f0002000'
does not match '^usb(@.*)?'
...
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The current one makes validation unhappy:
mmp3-dell-ariel.dt.yaml: l2-cache-controller@d0020000: $nodename:0:
'l2-cache-controller@d0020000' does not match
'^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This way the device tree validator learns that each cell of the property
constitutes a separate item. Otherwise it gets unnecessairly upset:
mmp3-dell-ariel.dt.yaml: rtc@d4010000: interrupts: [[1, 0]] is too short
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This way the device tree validator learns that each cell of the property
constitutes a separate item. Otherwise it gets unnecessairly upset:
pxa168-aspenite.dt.yaml: rtc@d4010000: interrupts: [[5, 6]] is too short
pxa910-dkb.dt.yaml: rtc@d4010000: interrupts: [[5, 6]] is too short
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
gpio-pxa uses two cell to encode the interrupt source: the pin number
and the trigger type. Adjust the device node accordingly.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This way the device tree validator learns that each cell of the property
constitutes a separate item. Otherwise it gets unnecessairly upset:
pxa300-raumfeld-speaker-s.dt.yaml: gpio@40e00000: interrupts:
[[8, 9, 10]] is too short
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr.>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
gpio-pxa uses two cell to encode the interrupt source: the pin number
and the trigger type. Adjust the device node accordingly.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This makes the nodes compatible with the generic i2c binding without the
board DTS files having to supply the necessary properties themselves.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The current ones makes validation unhappy:
dove-d3plug.dt.yaml: main-interrupt-ctrl@20200: $nodename:0:
'main-interrupt-ctrl@20200' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The current ones makes validation unhappy:
kirkwood-lsxhl.dt.yaml: main-interrupt-ctrl@20200: $nodename:0:
'main-interrupt-ctrl@20200' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
RGA node for rk322x, wifi node for rk3229-xms6 and some cleanups.
* tag 'v5.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add rga node for rk322x
ARM: dts: remove disable-wp from rk3229-xms6 emmc
ARM: dts: enable WLAN for Mecer Xtreme Mini S6
ARM: dts: rockchip: remove identical #include from rk3288.dtsi
ARM: dts: rockchip: rename and label gpio-led subnodes
Link: https://lore.kernel.org/r/3735080.6Cexqc3t0Y@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
mvebu dt for 5.8 (part 1)
Add LCP panel support on ReadyNAS NV+v2
Add new board: Check Point L-50, kirkwood based SoC router
Remove unused property 'timeout-ms' in i2c nodes
* tag 'mvebu-dt-5.8-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: ReadyNAS NV+v2: Add LCD panel
ARM: dts: kirkwood: Add Check Point L-50 board
ARM: dts: marvell: drop i2c timeout-ms property
Link: https://lore.kernel.org/r/87blmiefgw.fsf@FE-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno/Vexpress/Fast Models updates for v5.8
Various miscellaneous device tree source fixes to make them fully
binding compliant. It includes fixing various device node names,
order of interrupt properties, compatible names, address and size
cell fields and their aligment with children nodes as well as
moving some fixed devices out of bus node.
* tag 'juno-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Fix SCPI shared mem node name
arm64: dts: vexpress: Fix VExpress LED names
arm64: dts: juno: Fix GPU interrupt order
arm64: dts: fvp/juno: Fix bus node names
arm64: dts: fvp: Fix SMMU DT node
arm64: dts: fvp/juno: Fix serial node names
arm64: dts: juno: Use proper DT node name for USB
arm64: dts: fvp: Fix ITS node names and #msi-cells
arm64: dts: fvp: Fix GIC child nodes
arm64: dts: juno: Fix GIC child nodes
arm64: dts: fvp: Fix GIC compatible names
arm64: dts: juno: Fix mem-timer
arm64: dts: juno: Move fixed devices out of bus node
arm64: dts: fvp: Move fixed clocks out of bus node
arm64: dts: vexpress: Move fixed devices out of bus node
arm64: dts: fvp: Move fixed devices out of bus node
arm64: dts: fvp/juno: Fix node address fields
Link: https://lore.kernel.org/r/20200519094702.GA32975@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM dts updates for v5.8
This adds SCM firmware node for IPQ806x and fixes the high resolution
timer for IPQ4019. Samsung Galaxy S5 gains regulators, eMMC and USB
support.
* tag 'qcom-dts-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974-klte: Add max77826 pmic node
ARM: dts: qcom: msm8974-klte: Add USB node
ARM: dts: qcom: msm8974-klte: Add sdhci1 node
ARM: dts: qcom: msm8974-klte: Add gpio-keys nodes
ARM: dts: qcom: msm8974-klte: Remove inherited vreg_boost node
ARM: dts: qcom: msm8974-klte: Add pma8084 regulator nodes
ARM: dts: qcom: ipq4019: fix high resolution timer
ARM: dts: qcom: add scm definition to ipq806x
Link: https://lore.kernel.org/r/20200519052538.1250076-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for 5.8
- New board: Microchip SAMA5D2 Industrial Connectivity Platform
- All SoCs are now converted to the new PMC device tree binding
- sama5d2 flexcom nodes are now fully described in sama5d2.dtsi
* tag 'at91-5.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (35 commits)
ARM: dts: at91: sama5d2_xplained: Add aliases for the dedicated I2C IPs
ARM: dts: at91: Configure I2C SCL gpio as open drain
ARM: dts: at91: sama5d2_xplained: Describe the flx0 I2C function
ARM: dts: at91: sama5d2_ptc_ek: Add comments to describe the aliases
ARM: dts: at91: sama5d2_xplained: Add alias for DBGU
ARM: dts: at91: sama5d2: Add missing flexcom definitions
ARM: dts: at91: sama5d2: Remove i2s and tcb aliases from SoC dtsi
ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and I2C flx0 functions
ARM: dts: at91: sama5d2: Add DMA bindings for the flx1 I2C function
ARM: dts: at91: sama5d2: Add DMA bindings for the flx3 SPI function
ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and UART flx4 functions
ARM: dts: at91: sama5d2: Specify the FIFO size for the Flexcom UART
ARM: dts: at91: sama5d2: Move flx0 definitions in the SoC dtsi
ARM: dts: at91: sama5d2: Move flx1 definitions in the SoC dtsi
ARM: dts: at91: sama5d2: Move flx2 definitions in the SoC dtsi
ARM: dts: at91: sama5d2: Move flx3 definitions in the SoC dtsi
ARM: dts: at91: sama5d2: Move flx4 definitions in the SoC dtsi
ARM: dts: at91: sama5d2: Fix the label numbering for flexcom functions
ARM: dts: at91: sama5d27_wlsom1: Add alias for i2c0
ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP
...
Link: https://lore.kernel.org/r/20200518212844.GA26356@piout.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt
UniPhier ARM SoC DT updates for v5.8
- add DMA controller nodes
* tag 'uniphier-dt-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: add #address-cells and #size-cells to SPI nodes
ARM: dts: uniphier: Add ethernet aliases
ARM: dts: uniphier: Add XDMAC node
Link: https://lore.kernel.org/r/CAK7LNAQXSpg4s0e0d-tp9j85Sj01t13zAa5+rqsOWu4ZvkpYhg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt
Ux500 DTS updates for the v5.8 kernel series:
- Add proximity sensor and magnetometer to the Samsung Golden
devicetree.
- Add magnetometer and touchscreen to the Samsung Skomer
devicetree.
* tag 'ux500-dts-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500: Add touchscreen to the Skomer
ARM: dts: ux500: samsung-skomer: Add magnetometer
ARM: dts: ux500: samsung-golden: Add magnetometer
ARM: dts: ux500: samsung-golden: Add proximity sensor
Link: https://lore.kernel.org/r/CACRpkdbukO33SxAZ_yn-1N8=hq3hF5OBOtP_V0fbjRT-fAa87A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
MT2701:
- add MUSB device to the SoC and the EVB
MT7623:
- add Mali-450 device node and bindings
- add phy to gmac2
* tag 'v5.7-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: dts: mt2701: Add usb2 device nodes
dt-bindings: gpu: mali-utgard: add mediatek, mt7623-mali compatible
arm: dts: mt7623: add Mali-450 device node
arm: dts: mt7623: add phy-mode property for gmac2
Link: https://lore.kernel.org/r/ec17cf62-5463-9537-6618-2db9b2b5036e@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.8
- Leave the FPGA bridges disabled in base dtsi
- Add fpga2hps and fpga2sdram bridges on base Cyclone5/Arria5 dtsi
* tag 'socfpga_dts_update_for_v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Add fpga2hps and fpga2sdram bridges
ARM: dts: socfgpa: set bridges status to disabled
Link: https://lore.kernel.org/r/20200515193029.11318-2-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual number of patches to improve the Allwinner Device Tree
support, including:
- Support for the IOMMU on the H6
- Support for cpufreq / thermal throttling on the H6
- Support for the mailbox on the A64, A83t, H3, H5 and H6
- New boards: A20-OLinuXino-LIME-eMMC
* tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (23 commits)
arm64: dts: allwinner: h6: Add IOMMU
arm64: dts: allwinner: h6: Enable CPU opp tables for Tanix TX6
arm64: dts: allwinner: h6: add voltage range to OPP table
arm64: dts: allwinner: sun50i-a64: Add missing address/size-cells
arm64: dts: allwinner: h6: Enable CPU opp tables for Pine H64
arm64: dts: allwinner: Sort Pine H64 device-tree nodes
arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3
arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1
arm64: dts: allwinner: h6: Add CPU Operating Performance Points table
arm64: dts: allwinner: h6: Add thermal trip points/cooling map
arm64: dts: allwinner: h6: Add clock to CPU cores
arm64: allwinner: h6: orangepi-lite2: Support BT+WIFI combo module
arm64: dts: allwinner: h6: orangepi: Disable OTG mode
arm64: dts: allwinner: h6: orangepi: Add gpio power supply
ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity
arm64: dts: allwinner: h6: Add msgbox node
arm64: dts: allwinner: a64: Add msgbox node
ARM: dts: sunxi: h3/h5: Add msgbox node
ARM: dts: sunxi: a83t: Add msgbox node
ARM: dts: sun8i-h3: add opp table for mali gpu
...
Link: https://lore.kernel.org/r/cfa66bd9-f74c-4614-9ea5-9ef8546cc571.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.8-rc1
This contains a bit of cleanup and CPU frequency scaling support for the
Tegra30 Beaver board.
* tag 'tegra-for-5.8-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: dts: tegra30: beaver: Add CPU Operating Performance Points
ARM: dts: tegra30: beaver: Set up voltage regulators for DVFS
ARM: tegra: Kill off "simple-panel" compatibles
Link: https://lore.kernel.org/r/20200515145311.1580134-11-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.8 (take two)
- Initial support for the Renesas RZ/G1H SoC on the iWave RainboW
Qseven SOM (G21M) and board (G21D),
- Support for the AISTARVISION MIPI Adapter V2.1 camera board on the
Silicon Linux EK874 RZ/G2E evaluation kit.
* tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1
ARM: dts: r8a7742: Add GPIO nodes
ARM: dts: r8a7742: Add [H]SCIF{A|B} support
ARM: dts: r8a7742: Add IRQC support
ARM: dts: r8a7742-iwg21d-q7: Add iWave G21D-Q7 board based on RZ/G1H
ARM: dts: r8a7742-iwg21m: Add iWave RZ/G1H Qseven SOM
ARM: dts: r8a7742: Initial SoC device tree
clk: renesas: Add r8a7742 CPG Core Clock Definitions
dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros
Link: https://lore.kernel.org/r/20200515100547.14671-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.8, round 1
Highlights:
----------
MCU part:
-fix a typo for DAC io-channel-cells on f429 and h743
MPU part:
-Generic:
-Bump tp PSCI 1.0
-Fix a typo for DAC io-channel-cells
-Add M4 pdds for deep sleep mode
-Add I2C fatmode plus support
-Add new Octavio lxa-mc1 board based on OSDMP15x SiP
-Add new Stinger96 board support. It is a 96Boards IoT Extended board
based on stm32mp157a SoC. Some figures: 256MB DDR, 125MB and flash,
Onboard BG96 modem...
-Add IoT Box board support based on stinger96 board + Wifi/BT, CCS811
VOC sensor, 2 digitals microphones ...
-DH:
-Adapt dhcom-som and dhcom-pdk2 dts(i) files to STM32MP15 SoC diversity
-Add GPIO led and GPIO keys support on PDK2 board
-AV96:
-Major rework to support official avenger96 board based on DHCOR SOM.
-Prototype board is no more supported
* tag 'stm32-dt-for-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (58 commits)
ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board
ARM: dts: stm32: Split SoC-independent parts of DHCOM SOM and PDK2
ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2
ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2
ARM: dts: stm32: Add IoT Box board support
dt-bindings: arm: stm32: Document IoT Box compatible
ARM: dts: stm32: Add Stinger96 board support
dt-bindings: arm: stm32: Document Stinger96 compatible
ARM: dts: stm32: Add missing pinctrl entries for STM32MP15
dt-bindings: Add vendor prefix for Shiratech Solutions
ARM: dts: stm32: Add bindings for SPI2 on AV96
ARM: dts: stm32: Add alternate pinmux for SPI2 pins
ARM: dts: stm32: Add bindings for ADC on AV96
ARM: dts: stm32: Add alternate pinmux for ADC pins
ARM: dts: stm32: Add bindings for FDCAN2 on AV96
ARM: dts: stm32: Add alternate pinmux for FDCAN2 pins
ARM: dts: stm32: Add bindings for FDCAN1 on AV96
ARM: dts: stm32: Add alternate pinmux for FDCAN1 pins
ARM: dts: stm32: Repair I2C2 operation on AV96
ARM: dts: stm32: Add alternate pinmux for I2C2 pins
...
Link: https://lore.kernel.org/r/19160355-364d-170c-7ae2-5ba7f714103f@st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|