linux-yocto - Yocto Linux Embedded kernel

Age	Commit message (Collapse)	Author
2020-02-14	ARM: dts: at91: sama5d3: fix maximum peripheral clock rates	Alexandre Belloni
	commit ee0aa926ddb0bd8ba59e33e3803b3b5804e3f5da upstream. Currently the maximum rate for peripheral clock is calculated based on a typical 133MHz MCK. The maximum frequency is defined in the datasheet as a ratio to MCK. Some sama5d3 platforms are using a 166MHz MCK. Update the device trees to match the maximum rate based on 166MHz. Reported-by: Karl Rudbæk Olsen <karl@micro-technic.com> Fixes: d2e8190b7916 ("ARM: at91/dt: define sama5d3 clocks") Link: https://lore.kernel.org/r/20200110172007.1253659-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-21	ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on tx	Peter Rosin
	Remove pullup on uart TX signals, they are push-pull outputs thus pullups are pointless. Add pullup on uart RX signals, they prevent the RX signals to be left floating and so consuming a useless extra amount of power in crowbarred state if nothing is connected to RX. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-01-10	ARM: dts: at91: sama5d3_uart: fix reg sizes to match documentation	Peter Rosin
	The new size (0x100) also matches the size given in sama5d3.dtsi Documentation reference: section 43.6 "Universal Asynchronous Receiver Transmitter (UART) User Interface", table 43-4 "Register Mapping" in [1]. [1] Atmel-11121F-ATARM-SAMA5D3-Series-Datasheet_02-Feb-16 Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-03-04	ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals	Nicolas Ferre
	File name had at91 prefix, which is not the case anymore for SAMA5D3. AT91SAM9x5 was mentioned instead of SAMA5D3 SoC. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-04-18	dt-bindings: clock: Move at91.h to dt-bindigs/clock	Tushar Behera
	Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: Rob Landley <rob@landley.net> CC: Andrew Victor <linux@maxim.org.za> CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com> [nicolas.ferre@atmel.com: add new at91sam9261 & at91sam9rl] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-09	ARM: at91: add uart aliases to sama5d3 dtsi	Nicolas Ferre
	Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by Boris BREZILLON <b.brezillon@overkiz.com>
2013-12-02	ARM: at91/dt: define sama5d3 clocks	Boris BREZILLON
	Define sama5d3 clocks in sama5d3 device tree. Add references to the appropriate clocks in each peripheral. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-16	ARM: at91/dt: split sama5d3 peripheral definitions	Boris BREZILLON
	This patch splits the sama5d3 SoCs definition: - a common base for all sama5d3 SoCs (sama5d3.dtsi) - several optional peripheral definitions which will be included by sama5d3 specific SoCs (sama5d3_'periph name'.dtsi) - sama5d3 specific SoC definitions (sama5d3x.dtsi) This provides a better representation of the real hardware (drop unneed dt nodes) and avoids peripheral id conflict (which is not the case for current sama5d3 SoCs, but could be if other SoCs of this family are released). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: add more "sama5d3?" compatibility strings] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>