aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
AgeCommit message (Collapse)Author
2019-12-20ARM: dts: renesas: Group tuples in regulator-gpio states propertiesGeert Uytterhoeven
To improve human readability and enable automatic validation, the tuples in the "states" properties of device nodes compatible with "regulator-gpio" should be grouped, as reported by "make dtbs_check": $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/regulator/gpio-regulator.yaml arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi0: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi0: states:0: [3300000, 1, 1800000, 0] is too long arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi1: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi1: states:0: [3300000, 1, 1800000, 0] is too long arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi2: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi2: states:0: [3300000, 1, 1800000, 0] is too long ... Fix this by grouping the tuples using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-2-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-06-21ARM: dts: renesas: Use ip=on for bootargsMagnus Damm
Convert bootargs from ip=dhcp to ip=on Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-23ARM: dts: convert to SPDX identifier for Renesas boardsWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21ARM: dts: iwg22d-sodimm: Sound DMA support via DVC on DTSBiju Das
DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTSBiju Das
DMA transfer to/from SRC DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is trying SSI3 -> SRC3 SSI4 <- SRC4 Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF on DTSBiju Das
DMA transfer to/from SSIU DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21ARM: dts: iwg22d-sodimm: Sound DMA support on DTSBiju Das
DMA transfer to/from SSI DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21ARM: dts: iwg22d-sodimm: Sound PIO supportBiju Das
Enable sound PIO support on carrier board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codecBiju Das
This patch enables SGTL5000 audio codec on the carrier board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: iwg22d-sodimm: Add can0 support to carrier boardFabrizio Castro
This patch enables CAN0 interface exposed through connector J15 on the carrier board. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: iwg22d-sodimm: Enable HS-USBBiju Das
From: Biju Das <biju.das@bp.renesas.com> Enable HS-USB on iWave RZ/G1E carrier board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: iwg22d-sodimm: sort dt nodesFabrizio Castro
Improve the layout of r8a7745-iwg22d-sodimm.dts by sorting the nodes alphabetically. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: iwg22d: Add /dev/ttySC5 supportFabrizio Castro
Add support for HSCIF1 as /dev/ttySC5, keeping the same naming scheme adopted by iWave in their BSP release. This interface uses RTS/CTS. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: iwg22d: Use /dev/ttySC3 as debug consoleFabrizio Castro
The BSP release from iWave uses /dev/ttySC3 as debug console, this patch renames the alias accordingly for compatibility. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-12ARM: dts: iwg22d-sodimm: Enable USB PHYBiju Das
Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-12ARM: dts: iwg22d-sodimm: Enable internal PCIBiju Das
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to them. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-25ARM: dts: iwg22d: Enable SDHI0 controllerFabrizio Castro
Enable the SDHI0 controller on iWave RZ/G1E carrier board. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-19ARM: dts: iwg22d-sodimm: Add Ethernet AVB supportBiju Das
Define the iWave RainboW-G22D board dependent part of the Ethernet AVB device node. On some older versions of the platform (before R4.0) the phy address may be 1 or 3. The address is fixed to 3 for R4.0 onwards (which will be the first mainstream release), hence using 3 in the dts. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-19ARM: dts: iwg22d-sodimm: Add pinctl support for scif4Biju Das
Adding pinctrl support for scif4 interface. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-19ARM: dts: iwg22d-sodimm: Add support for iWave G22D-SODIMM boardBiju Das
Add support for iWave RainboW-G22D-SODIMM board based on RZ/G1E. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-17 00:29:24 +0000