aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/keystone-k2l.dtsi
AgeCommit message (Collapse)Author
2020-05-27ARM: dts: keystone: Rename "msmram" node to "sram"Krzysztof Kozlowski
The device node name should reflect generic class of a device so rename the "msmram" node and its children to "sram". This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2018-03-05ARM: dts: keystone-k2l: Move keystone_dsp_gpio to under device-state-controlAndrew F. Davis
The keystone_irq node describes a device that is a member of the device state control module address space. As such, it should not be a member of soc0 bus but instead a sub-node of device-state-control. This move also fixes warnings about not having a reg property. Now that this is a sub-node of device-state-control, a syscon type node, we add this reg property but relative to the syscon base, this way when the dt-binding/driver are updated we can drop the non-standard gpio,syscon-dev property completely and simply use get_resource() in the driver. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-12-16ARM: dts: keystone*: Use a single soc0 instanceNishanth Menon
Provide a soc0 node and reference the same to simplify dts. This also resolves the following warnings when built with W=1: arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name NOTE: Though we can reformat files by reducing 1 level of indent due to the use of soc0 phandle, we omit that change to prevent un-necessary churn in code base. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-12-16ARM: dts: keystone*: Standardize license with SPDX tagNishanth Menon
Standardize the licenses with SPDX license tag and standardize TI's copyright statement to be consistently after file description. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-12-02ARM: dts: keystone-k2l: Add the second gpio bank nodeKeerthy
In case of k2l there are 2 more banks with 16 pins each. Adding the node as the da-vinci driver now supports multiple banks. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-30ARM: dts: keystone-k2l: Add DSP nodesSuman Anna
The Keystone 2 66AK2L SoCs have 4 TMS320C66x DSP Core Subsystems (C66x CorePacs), each with a 1.0 GHz or 1.2 GHz C66x Fixed / Floating-Point DSP Core, and 32 KB of L1P & L1D SRAMs and a 1 MB L2 SRAM. Add the DT nodes for these DSP processor sub-systems. The processors do not have an MMU, and use various IPC Generation registers and shared memory for inter-processor communication. The aliases with a stem 'rproc' have also been added for all the DSPs, they provide a fixed remoteproc id to each DSP processor. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Sam Nelson <sam.nelson@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-05-26ARM: dts: keystone-k2l: fix broken Ethernet due to disabled OSRMurali Karicheri
Ethernet networking on K2L has been broken since v4.11-rc1. This was caused by commit 32a34441a9bd ("ARM: keystone: dts: fix netcp clocks and add names"). This commit inadvertently moves on-chip static RAM clock to the end of list of clocks provided for netcp. Since keystone PM domain support does not have a list of recognized con_ids, only the first clock in the list comes under runtime PM management. This means the OSR (On-chip Static RAM) clock remains disabled and that broke networking on K2L. The OSR is used by QMSS on K2L as an external linking RAM. However this is a standalone RAM that can be used for non-QMSS usage (as well as from DSP side). So add a SRAM device node for the same and add the OSR clock to the node. Remove the now redundant OSR clock node from netcp. To manage all clocks defined for netCP's use by runtime PM needs keystone generic power domain (genpd) driver support which is under works. Meanwhile, this patch restores K2L networking and is correct irrespective of any future genpd work since OSR is an independent module and not part of NetCP anyway. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> [nsekhar@ti.com: commit message updates, port to latest mainline] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: stable@vger.kernel.org # for 4.11 Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-01-19ARM: dts: keystone-k2l: Add PSC reset controller nodeSuman Anna
The Power Sleep Controller (PSC) module contains specific memory-mapped registers that can be used to perform reset management using specific bits for the DSPs available on the SoC. The PSC is defined using a syscon node, and the reset functionality is defined using a child syscon reset controller node. Add this syscon reset controller node as well as the reset control data for the resets it supports for the 66AK2L SoCs. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-01-07ARM: dts: keystone-k2l: Reserve MSM RAM for boot monitorSuman Anna
The Keystone 2 boot monitor uses 32 KB of the MSM RAM @ 0x0c1f8000 on 66AK2L SoCs, so add a reserved child node for the same. This address is aligned to the values used within the latest boot monitor firmware [1] as of commit cf8b431e8b3b ("soc: Move load address to end of MSMC"). [1] git://git.ti.com/processor-firmware/ks2-boot-monitor.git Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-01-07ARM: dts: keystone-k2l: Add MSM RAM nodeSuman Anna
Add the RAM managed by the Multicore Shared Memory Controller (MSMC) as a mmio-sram node. The 66AK2L SoCs have 2 MB of such memory. Any specific MSM memory range needed by a software module ought to be reserved using an appropriate child node. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-01-06ARM: dts: keystone: Add "ti,da830-uart" compatible stringDavid Lechner
The TI Keystone SoCs have extra UART registers beyond the standard 8250 registers, so we need a new compatible string to indicate this. Also, at least one of these registers uses the full 32 bits, so we need to specify reg-io-width in addition to reg-shift. "ns16550a" is left in the compatible specification since it does work as long as the bootloader configures the SoC UART power management registers. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2016-11-07ARM: dts: Add #pinctrl-cells for pinctrl-single instancesTony Lindgren
Drivers using pinctrl-single,pins have #pinctrl-cells = <1>, while pinctrl-single,bits need #pinctrl-cells = <2>. Note that this patch can be optionally applied separately from the driver changes as the driver supports also the legacy binding without #pinctrl-cells. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-08ARM: dts: keystone-k2l: Add pinctrl nodeKeerthy
Add pinctrl node and populate the pinctrl registers with the default values. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2016-04-13ARM: dts: k2*: Rename the k2* files to keystone-k2* filesNishanth Menon
As reported in [1], rename the k2* dts files to keystone-* files this will force consistency throughout. Script for the same (and hand modified for Makefile and MAINTAINERS files): for i in arch/arm/boot/dts/k2* do b=`basename $i`; git mv $i arch/arm/boot/dts/keystone-$b; sed -i -e "s/$b/keystone-$b/g" arch/arm/boot/dts/*[si] done NOTE: bootloaders that depend on older dtb names will need to be updated as well. [1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2 Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>