summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/at91sam9g45.dtsi
AgeCommit message (Collapse)Author
2012-12-13Merge tag 'sound-3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This update contains a fairly wide range of changes all over in sound subdirectory, mainly because of UAPI header moves by David and __dev* annotation removals by Bill. Other highlights are: - Introduced the support for wallclock timestamps in ALSA PCM core - Add the poll loop implementation for HD-audio jack detection - Yet more VGA-switcheroo fixes for HD-audio - New VIA HD-audio codec support - More fixes on resource management in USB audio and MIDI drivers - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite, Roland VG-99, etc - Add support for FastTrack C400 usb-audio - Clean ups in many drivers regarding firmware loading - Add PSC724 Ultiimate Edge support to ice1712 - A few hdspm driver updates - New Stanton SCS.1d/1m FireWire driver - Standardisation of the logging in ASoC codes - DT and dmaengine support for ASoC Atmel - Support for Wolfson ADSP cores - New drivers for Freescale/iVeia P1022 and Maxim MAX98090 - Lots of other ASoC driver fixes and developments" Fix up trivial conflicts. And go out on a limb and assume the dts file 'status' field of one of the conflicting things was supposed to be "disabled", not "disable" like in pretty much all other cases. * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits) ALSA: hda - Move runtime PM check to runtime_idle callback ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522 ALSA: hda - Avoid doubly suspend after vga switcheroo ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3 ALSA: hda - Check validity of CORB/RIRB WP reads ALSA: hda - use usleep_range in link reset and change timeout check ALSA: HDA: VIA: Add support for codec VT1808. ALSA: HDA: VIA Add support for codec VT1705CF. ASoC: codecs: remove __dev* attributes ASoC: utils: remove __dev* attributes ASoC: ux500: remove __dev* attributes ASoC: txx9: remove __dev* attributes ASoC: tegra: remove __dev* attributes ASoC: spear: remove __dev* attributes ASoC: sh: remove __dev* attributes ASoC: s6000: remove __dev* attributes ASoC: OMAP: remove __dev* attributes ASoC: nuc900: remove __dev* attributes ASoC: mxs: remove __dev* attributes ASoC: kirkwood: remove __dev* attributes ...
2012-12-13Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC device tree conversions and enablement from Olof Johansson: "Continued device tree conversion and enablement across a number of platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other smaller series as well. ux500 has seen continued conversion for platforms. Several platforms have seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra is adding data for new devices/drivers, and Exynos has a bunch of new bindings and devices added as well. So, pretty much the same progression in the right direction as the last few releases." Fix up conflicts as per Olof. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits) ARM: ux500: Rename dbx500 cpufreq code to be more generic ARM: dts: add missing ux500 device trees ARM: ux500: Stop registering the PCM driver from platform code ARM: ux500: Move board specific GPIO info out to subordinate DTS files ARM: ux500: Disable the MMCI gpio-regulator by default ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ...
2012-11-20ARM: at91: dt: at91sam9: add mmc pinctrl supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-20ARM: at91/dts: add nodes for atmel hsmci controllers for atmel SOCsLudovic Desroches
Add mci controller nodes to atmel SOCs. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19ARM: at91: dt: at91sam9260: split rts and cts pinctrl notJean-Christophe PLAGNIOL-VILLARD
as we just use the rts and not the rts & cts for rs485 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19ARM: at91: fix usart/uart namimg in pinctrlJean-Christophe PLAGNIOL-VILLARD
USART are the full pin uart DBGU the debug Unit UART the two pin uart Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19ARM: at91sam9: add macb pinctrl supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-16ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45Fabio Porcedda
Tested on an at91sam9260 board (evk-pro3). Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-07ARM: at91: atmel-ssc: add device tree supportBo Shen
Add atmel-ssc for device tree support Match "atmel,at91rm9200-ssc" for using pdc for data transfer Match "atmel,at91sam9g45-ssc" for using dma for data transfer Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-13arm: at91: dt: at91sam9 add nand pinctrl supportJean-Christophe PLAGNIOL-VILLARD
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-13arm: at91: dt: at91sam9 add serial pinctrl supportJean-Christophe PLAGNIOL-VILLARD
Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-13arm: at91: dt: at91sam9 add pinctrl supportJean-Christophe PLAGNIOL-VILLARD
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-13at91: regroup gpio and pinctrl under the same rangesJean-Christophe PLAGNIOL-VILLARD
Fix also the reg size as we have 512 bytes bank not 256 bytes per gpio/mux controller Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-08Merge tag 'v3.6-rc7' into i2c-embedded/for-nextWolfram Sang
Linux 3.6-rc7 Needed to get updates from i2c-embedded/for-current into i2c-embedded/for-next
2012-09-17ARM: at91: fix missing #interrupt-cells on gpio-controllerJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Tested-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-09-12ARM: dts: add twi nodes for atmel SoCsLudovic Desroches
Add TWI nodes for atmel SoCs but keep i2c-gpio ones in order to let the choice to the user in dts files. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-02ARM: at91: add of irq priorities supportLudovic Desroches
Add a third cell to define irq priority. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-02ARM: at91: aic add dt support for external irqsJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-05-14ARM: AT91: Add ADC driver to the at91sam9g45 dtsiMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-14ARM: dts: remove blank interrupt-parent propertiesRob Herring
These were incorrectly introduced and can cause problems for of_irq_init. The correct way to define a root controller is no interrupt-parent set at all or the interrupt-parent is set to the root controller itself when inherited from a parent node. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Tested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-04ARM: at91: dt: remove unit-address part for memory nodesLudovic Desroches
Because of the inclusion of skeleton.dtsi, the memory node is named "memory" we where not modifying the already included one but creating a new one. It caused bad memory node detection during early_init_dt_scan_memory() so we modify them. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: devicetree-discuss@lists.ozlabs.org
2012-03-16ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5Jean-Christophe PLAGNIOL-VILLARD
make the ECHI depends on ARCH_AT91 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: devicetree-discuss@lists.ozlabs.org
2012-03-16ARM: at91: dt: enable usb ohci for sam9g20, sam9g45 amd sam9x5Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: devicetree-discuss@lists.ozlabs.org
2012-03-15ARM: at91: add Shutdown Controller (SHDWC) DT supportJean-Christophe PLAGNIOL-VILLARD
Use a string to specific the wakeup mode to make it more readable. Add the Real-time Clock Wake-up support too for sam9g45 and sam9x5. Add AT91_SHDW_CPTWK0_MAX to specific the Max of the Wakeup Counter. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add ram controller DT supportJean-Christophe PLAGNIOL-VILLARD
We can now drop the call to ioremap_registers() as we have the binding for the SDRAM/DDR Controller. Drop ioremap_registers() for sam9x5 too. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add RSTC (Reset Controller) dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add pmc DT supportJean-Christophe PLAGNIOL-VILLARD
Specified the main Oscillator via clock binding. This will allow to do not hardcode it anymore in the DT board at 12MHz. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: sam9g45 add i2c DT supportJean-Christophe PLAGNIOL-VILLARD
For now on use i2c-gpio driver on the same pin as the hardware IP. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15atmel/nand: add DT supportJean-Christophe PLAGNIOL-VILLARD
Use a local copy of board informatin and fill with DT data. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91/tc: add device tree support to atmel_tclibNicolas Ferre
Device tree support added to atmel_tclib: the generic Timer Counter library. This is used by the clocksource/clockevent driver tcb_clksrc. The current DT enabled platforms are also modified to use it: - .dtsi files are modified to add Timer Counter Block entries - alias are created to allow identification of each block - clkdev lookup tables are added for clocks identification. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-01ARM: at91: pit add DT supportJean-Christophe PLAGNIOL-VILLARD
Retreive registers address and IRQ from device tree entry. Called from at91_dt_init_irq() so that timers are up-n-running when timers initialization will occur. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: change error path and interrupts property handling] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91/gpio: add irqdomain and DT supportNicolas Ferre
Add "legacy" type of irqdomain to preserve old-style numbering and allow smooth transition for both DT and non-DT cases. Original idea and code by Jean-Christophe Plagniol-Villard. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-01ARM: at91/aic: add irq domain and device tree supportNicolas Ferre
Add an irqdomain for the AIC interrupt controller. The device tree support is mapping the registers and is using the irq_domain_add_legacy() to manage hwirq translation. The documentation is describing the meaning of the two cells required for using this "interrupt-controller" in a device tree node. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-12-16ARM: at91/net: add macb ethernet controller in 9g45/9g20 DTNicolas Ferre
Add the Cadence macb ethernet controller in at91sam9g45 and at91sam9g20 .dtsi and enable it in at91sam9m10g45ek and usb_a9g20 board device tree file. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-10-25ARM: at91: dt: at91sam9g45 family and board device tree filesNicolas Ferre
Create a new device tree source file for Atmel at91sam9g45 SoC family. The Evaluation Kit at91sam9m10g45ek includes it. This first basic support will be populated as drivers and boards will be converted to device tree. Contains serial, dma and interrupt controllers. The generic board file still takes advantage of platform data for early serial init. As we need a storage media and the NAND flash driver is not converted to DT yet, we keep old initialization for it. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-16 15:08:44 +0000