| Age | Commit message (Collapse) | Author |
|---|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Revert the platform driver conversion of interrupt chip drivers as
it turned out to create more problems than it solves.
- Fix a trivial typo in the new module helpers which made probing
reliably fail.
- Small fixes in the STM32 and MIPS Ingenic drivers
- The TI firmware rework which had badly managed dependencies and had
to wait post rc1"
* tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Leave parent IRQ unmasked on suspend
irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake
irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse
irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers
arm64: dts: k3-am65: Update the RM resource types
arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field
dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml
dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent.
irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml
dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent
firmware: ti_sci: Add support for getting resource with subtype
firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
firmware: ti_sci: Drop the device id to resource type translation
|
|
Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
protection, bad ref counting, missing memset(), etc.) all over the
place:
1) Use get_file_rcu() in task_file iterator, from Yonghong Song.
2) There are two ways to set remote source MAC addresses in macvlan
driver, but only one of which validates things properly. Fix this.
From Alvin Šipraga.
3) Missing of_node_put() in gianfar probing, from Sumera
Priyadarsini.
4) Preserve device wanted feature bits across multiple netlink
ethtool requests, from Maxim Mikityanskiy.
5) Fix rcu_sched stall in task and task_file bpf iterators, from
Yonghong Song.
6) Avoid reset after device destroy in ena driver, from Shay
Agroskin.
7) Missing memset() in netlink policy export reallocation path, from
Johannes Berg.
8) Fix info leak in __smc_diag_dump(), from Peilin Ye.
9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
Tomlinson.
10) Fix number of data stream negotiation in SCTP, from David Laight.
11) Fix double free in connection tracker action module, from Alaa
Hleihel.
12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: nexthop: don't allow empty NHA_GROUP
bpf: Fix two typos in uapi/linux/bpf.h
net: dsa: b53: check for timeout
tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
net: sctp: Fix negotiation of the number of data streams.
dt-bindings: net: renesas, ether: Improve schema validation
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
hv_netvsc: Remove "unlikely" from netvsc_select_queue
bpf: selftests: global_funcs: Check err_str before strstr
bpf: xdp: Fix XDP mode when no mode flags specified
selftests/bpf: Remove test_align leftovers
tools/resolve_btfids: Fix sections with wrong alignment
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
sfc: fix build warnings on 32-bit
net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
libbpf: Fix map index used in error message
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
net: atlantic: Use readx_poll_timeout() for large timeout
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another set of DT fixes:
- restore range parsing error check
- workaround PCI range parsing with missing 'device_type' now
required
- correct description of 'phy-connection-type'
- fix erroneous matching on 'snps,dw-pcie' by 'intel,lgm-pcie' schema
- a couple of grammar and whitespace fixes
- update Shawn Guo's email"
* tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: vendor-prefixes: Remove trailing whitespace
dt-bindings: net: correct description of phy-connection-type
dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
of: address: Work around missing device_type property in pcie nodes
dt: writing-schema: Miscellaneous grammar fixes
dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindings
of/address: check for invalid range.cpu_addr
|
|
Fixes: f516fb704d02fff2 ("dt-bindings: Whitespace clean-ups in schema files")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819092058.1526-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The phy-connection-type parameter is described in ePAPR 1.1:
Specifies interface type between the Ethernet device and a physical
layer (PHY) device. The value of this property is specific to the
implementation.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://lore.kernel.org/r/1597917724-11127-1-git-send-email-madalin.bucur@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The intel,lgm-pcie binding is matching on all snps,dw-pcie instances
which is wrong. Add a custom 'select' entry to fix this.
Fixes: e54ea45a4955 ("dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller")
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- The CLINT driver has been split in two: one to handle the M-mode
CLINT (memory mapped and used on NOMMU systems) and one to handle the
S-mode CLINT (via SBI).
- The addition of SiFive's drivers to rv32_defconfig
* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SiFive drivers to rv32_defconfig
dt-bindings: timer: Add CLINT bindings
RISC-V: Remove CLINT related code from timer and arch
clocksource/drivers: Add CLINT timer driver
RISC-V: Add mechanism to provide custom IPI operations
|
|
- Remove pinctrl consumer properties, as they are handled by core
dt-schema,
- Document missing properties,
- Document missing PHY child node,
- Add "additionalProperties: false".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We add DT bindings documentation for CLINT device.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
- Add missing verb,
- Fix accidental plural.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200819124850.20543-1-geert+renesas@glider.be
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of fixes that came in for SPI during the merge window.
Some from ST and others for their controller, one from Lukas for a
race between device addition and controller unregistration and one
from fix from Geert for the DT bindings which unbreaks validation"
* tag 'spi-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
dt-bindings: lpspi: Add missing boolean type for fsl,spi-only-use-cs1-sel
spi: stm32: always perform registers configuration prior to transfer
spi: stm32: fixes suspend/resume management
spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate
spi: stm32: fix fifo threshold level in case of short transfer
spi: stm32h7: fix race condition at end of transfer
spi: stm32: clear only asserted irq flags on interrupt
spi: Prevent adding devices below an unregistering controller
|
|
Use Shawn Guo's kernel.org address for the i.MX related bindings
as per the MAINTAINERS entries.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200818111245.17047-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
|
|
In order to automate the verification of DT nodes convert
ti,sci-inta.txt ti,sci-inta.yaml.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200806074826.24607-9-lokeshvutla@ti.com
|
|
Drop the firmware related interrupt ranges and use the hardware specified
interrupt numbers within Interrupt Aggregator. This ensures interrupt
aggregator DT node need not assume any interrupt parent type.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200806074826.24607-8-lokeshvutla@ti.com
|
|
In order to automate the verification of DT nodes convert
ti,sci-intr.txt ti,sci-intr.yaml.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200806074826.24607-6-lokeshvutla@ti.com
|
|
as parent
Drop the firmware related dt-bindings and use the hardware specified
interrupt numbers within Interrupt Router. This ensures interrupt router
DT node need not assume any interrupt parent type.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200806074826.24607-5-lokeshvutla@ti.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another round of 'allOf' removals and whitespace clean-ups of schemas"
* tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Remove more cases of 'allOf' containing a '$ref'
dt-bindings: Whitespace clean-ups in schema files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks
- Make better attempt at matching device with the correct OF node
- Allow batch removal of hierarchical sub-devices
New Drivers
- Add STM32 Clocksource driver
- Add support for Khadas System Control Microcontroller
Driver Removal
- Remove unused driver for TI's SMSC ECE1099
New Device Support
- Add support for Intel Emmitsburg PCH to Intel LPSS PCI
- Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
- Add support for Dialog DA revision to Dialog DA9063
New Functionality
- Add support for AXP803 to be probed by I2C
Fix-ups
- Numerous W=1 warning fixes
- Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
- Enabled Regmap 'fast I/O' in stm32-lptimer
- Change BUG_ON to WARN_ON in arizona-core
- Remove superfluous code/initialisation (madera, max14577)
- Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
- Switch to of_platform_populate() in sprd-sc27xx-spi
- Expand out set/get brightness/pwm macros in lm3533-ctrlbank
- Disable IRQs on suspend in motorola-cpcap
- Clean-up error handling in intel_soc_pmic_mrfld
- Ensure correct removal order of sub-devices in madera
- Many s/HTTP/HTTPS/ link changes
- Ensure name used with Regmap is unique in syscon
Bug Fixes
- Properly 'put' clock on unbind and error in arizona-core
- Fix revision handling in da9063
- Fix 'assignment of read-only location' error in kempld-core
- Avoid using the Regmap API when atomic in rn5t618
- Redefine volatile register description in rn5t618
- Use locking to protect event handler in dln2"
* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
mfd: syscon: Use a unique name with regmap_config
mfd: Replace HTTP links with HTTPS ones
mfd: dln2: Run event handler loop under spinlock
mfd: madera: Improve handling of regulator unbinding
mfd: mfd-core: Add mechanism for removal of a subset of children
mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
mfd: max14577: Remove redundant initialization of variable current_bits
mfd: rn5t618: Fix caching of battery related registers
mfd: max77693-private: Drop a duplicated word
mfd: da9055: pdata.h: Drop a duplicated word
mfd: rn5t618: Make restart handler atomic safe
mfd: kempld-core: Fix 'assignment of read-only location' error
mfd: axp20x: Allow the AXP803 to be probed by I2C
mfd: da9063: Add support for latest DA silicon revision
mfd: da9063: Fix revision handling to correctly select reg tables
dt-bindings: mfd: st,stmfx: Remove I2C unit name
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
mfd: motorola-cpcap: Disable interrupt for suspend
mfd: smsc-ece1099: Remove driver
mfd: core: Add OF_MFD_CELL_REG() helper
...
|
|
Another wack-a-mole pass of killing off unnecessary 'allOf + $ref'
usage.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Clean-up incorrect indentation, extra spaces, long lines, and missing
EOF newline in schema files. Most of the clean-ups are for list
indentation which should always be 2 spaces more than the preceding
keyword.
Found with yamllint (which I plan to integrate into the checks).
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- bus recovery can now be given a pinctrl handle and the I2C core will
do all the steps to switch to/from GPIO which can save quite some
boilerplate code from drivers
- "fallthrough" conversion
- driver updates, mostly ID additions
* 'i2c/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (32 commits)
i2c: iproc: fix race between client unreg and isr
i2c: eg20t: use generic power management
i2c: eg20t: Drop PCI wakeup calls from .suspend/.resume
i2c: mediatek: Fix i2c_spec_values description
i2c: mediatek: Add i2c compatible for MediaTek MT8192
dt-bindings: i2c: update bindings for MT8192 SoC
i2c: mediatek: Add access to more than 8GB dram in i2c driver
i2c: mediatek: Add apdma sync in i2c driver
i2c: i801: Add support for Intel Tiger Lake PCH-H
i2c: i801: Add support for Intel Emmitsburg PCH
i2c: bcm2835: Replace HTTP links with HTTPS ones
Documentation: i2c: dev: 'block process call' is supported
i2c: at91: Move to generic GPIO bus recovery
i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs
i2c: core: add generic I2C GPIO recovery
dt-bindings: i2c: add generic properties for GPIO bus recovery
i2c: rcar: avoid race when unregistering slave
i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c
i2c: tegra: Fix runtime resume to re-init VI I2C
i2c: tegra: Fix the error path in tegra_i2c_runtime_resume
...
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Remove the I2C unit name to fix the following build warning with
'make dt_binding_check':
Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add DT binding schema for J721e system controller.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Not much this cycle - mostly non urgent driver fixes:
- ds1374: use watchdog core
- pcf2127: add alarm and pcf2129 support"
* tag 'rtc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: fix alarm handling
rtc: pcf2127: add alarm support
rtc: pcf2127: add pca2129 device id
rtc: max77686: Fix wake-ups for max77620
rtc: ds1307: provide an indication that the watchdog has fired
rtc: ds1374: remove unused define
rtc: ds1374: fix RTC_DRV_DS1374_WDT dependencies
rtc: cleanup obsolete comment about struct rtc_class_ops
rtc: pl031: fix set_alarm by adding back call to alarm_irq_enable
rtc: ds1374: wdt: Use watchdog core for watchdog part
rtc: Replace HTTP links with HTTPS ones
rtc: goldfish: Enable interrupt in set_alarm() when necessary
rtc: max77686: Do not allow interrupt to fire before system resume
rtc: imxdi: fix trivial typos
rtc: cpcap: fix range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"Here's some more updates that missed the last pull request because I
happened to tag the tree at an earlier point in the history of
clk-next. I must have fat fingered it and checked out an older version
of clk-next on this second computer I'm using.
This time it actually includes more code for Qualcomm SoCs, the AT91
major updates, and some Rockchip SoC clk driver updates as well. I've
corrected this flow so this shouldn't happen again"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (83 commits)
clk: bcm2835: Do not use prediv with bcm2711's PLLs
clk: drop unused function __clk_get_flags
clk: hsdk: Fix bad dependency on IOMEM
dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180
clk: mmp: avoid missing prototype warning
clk: sparx5: Add Sparx5 SoC DPLL clock driver
dt-bindings: clock: sparx5: Add bindings include file
clk: qoriq: add LS1021A core pll mux options
clk: clk-atlas6: fix return value check in atlas6_clk_init()
clk: tegra: pll: Improve PLLM enable-state detection
clk: X1000: Add support for calculat REFCLK of USB PHY.
clk: JZ4780: Reformat the code to align it.
clk: JZ4780: Add functions for enable and disable USB PHY.
clk: Ingenic: Add RTC related clocks for Ingenic SoCs.
dt-bindings: clock: Add tabs to align code.
dt-bindings: clock: Add RTC related clocks for Ingenic SoCs.
clk: davinci: Use fallthrough pseudo-keyword
clk: imx: Use fallthrough pseudo-keyword
clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk
clk: qcom: gcc-sdm660: Add missing modem reset
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- f71808e_wdt imporvements
- dw_wdt improvements
- mlx-wdt: support new watchdog type with longer timeout period
- fallthrough pseudo-keyword replacements
- overall small fixes and improvements
* tag 'linux-watchdog-5.9-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits)
watchdog: rti-wdt: balance pm runtime enable calls
watchdog: rti-wdt: attach to running watchdog during probe
watchdog: add support for adjusting last known HW keepalive time
watchdog: use __watchdog_ping in startup
watchdog: softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot'
watchdog: pcwd_usb: remove needless check before usb_free_coherent()
watchdog: Replace HTTP links with HTTPS ones
dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support
watchdog: initialize device before misc_register
watchdog: booke_wdt: Add common nowayout parameter driver
watchdog: scx200_wdt: Use fallthrough pseudo-keyword
watchdog: Use fallthrough pseudo-keyword
watchdog: f71808e_wdt: do stricter parameter validation
watchdog: f71808e_wdt: clear watchdog timeout occurred flag
watchdog: f71808e_wdt: remove use of wrong watchdog_info option
watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options
docs: watchdog: codify ident.options as superset of possible status flags
dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150
dt-bindings: watchdog: Convert QCOM watchdog timer bindings to YAML
watchdog: dw_wdt: Add DebugFS files
...
|
|
The PCA2129 is the automotive grade version of the PCF2129.
add it to the list of compatibles.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20200630024211.12782-2-liambeguin@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull hwspinlock updates from Bjorn Andersson:
"This introduces a new DT binding format to describe the Qualcomm
hardware mutex block and deprecates the old, invalid, one.
It also cleans up the Kconfig slightly"
* tag 'hwlock-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
dt-bindings: hwlock: qcom: Remove invalid binding
hwspinlock: qcom: Allow mmio usage in addition to syscon
dt-bindings: hwlock: qcom: Allow device on mmio bus
dt-bindings: hwlock: qcom: Migrate binding to YAML
hwspinlock: Simplify Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces a new "detached" state for remote processors that are
deemed to be running at the time Linux boots and the infrastructure
for "attaching" to these. It then introduces the support for
performing this operation for the STM32 platform.
The coredump functionality is moved out from the core file and gains
support for an optional mode where the recovery phase awaits the
notification from devcoredump that the dump should be released. This
allows userspace to grab the coredump in scenarios where vmalloc space
is too low for creating a complete copy of the coredump before handing
this to devcoredump.
A new character device based interface is introduced to allow tying
the stoppage of a remote processor to the termination of a user space
process. This is useful in situations when such process provides
crucial resources/operations for the firmware running on the remote
processor.
The Texas Instrument K3 driver gains support for the C66x and C71x
DSPs.
Qualcomm remoteprocs gains support for stashing relocation information
in IMEM, to aid post mortem debugging and the crash notification
mechanism is generalized to be reusable in cases where loosely coupled
drivers needs to know about the status of a remote processor. One such
example is the IPA hardware block, which is jointly owned with the
modem and migrated to this improved interface.
It also introduces a number of bug fixes and debug improvements for
the Qualcomm modem remoteproc driver.
And it cleans up the inconsistent interface for remoteproc drivers to
implement power management"
* tag 'rproc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (56 commits)
remoteproc: core: Register the character device interface
remoteproc: Add remoteproc character device interface
remoteproc: kill IPA notify code
net: ipa: new notification infrastructure
remoteproc: k3-dsp: Add support for C71x DSPs
dt-bindings: remoteproc: k3-dsp: Update bindings for C71x DSPs
remoteproc: k3-dsp: Add support for L2RAM loading on C66x DSPs
remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs
dt-bindings: remoteproc: Add bindings for C66x DSPs on TI K3 SoCs
remoteproc: k3: Add TI-SCI processor control helper functions
remoteproc: Introduce rproc_of_parse_firmware() helper
dt-bindings: arm: keystone: Add common TI SCI bindings
remoteproc: qcom_q6v5_mss: Remove redundant running state
remoteproc: qcom: q6v5: Update running state before requesting stop
remoteproc: qcom_q6v5_mss: Add modem debug policy support
remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load
remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load
rpmsg: update documentation
remoteproc: qcom_q6v5_mss: Add MBA log extraction support
remoteproc: Add coredump debugfs entry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- an update to Elan touchpad controller driver supporting newer ICs
with enhanced precision reports and a new firmware update process
- an update to EXC3000 touch controller supporting additional parts
- assorted driver fixups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits)
Input: exc3000 - add support to query model and fw_version
Input: exc3000 - add reset gpio support
Input: exc3000 - add EXC80H60 and EXC80H84 support
dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema
Input: sentelic - fix error return when fsp_reg_write fails
Input: alps - remove redundant assignment to variable ret
Input: ims-pcu - return error code rather than -ENOMEM
Input: elan_i2c - add ic type 0x15
Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary
Input: uinput - fix typo in function name documentation
Input: ati_remote2 - add missing newlines when printing module parameters
Input: psmouse - add a newline when printing 'proto' by sysfs
Input: synaptics-rmi4 - drop a duplicated word
Input: elan_i2c - add support for high resolution reports
Input: elan_i2c - do not constantly re-query pattern ID
Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14
Input: elan_i2c - handle firmware updated on newer ICs
Input: elan_i2c - add support for different firmware page sizes
Input: elan_i2c - fix detecting IAP version on older controllers
Input: elan_i2c - handle devices with patterns above 1
...
|
|
When running "make dt_binding_check" (even if restricted to an unrelated
binding document using DT_SCHEMA_FILES=...):
Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml: ignoring, error in schema: properties: fsl,spi-only-use-cs1-sel
warning: no schema found in file: Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
Fix this by adding a proper type definition for the vendor-specific
fsl,spi-only-use-cs1-sel property.
Fixes: 7ac9bbf6ab3085c2 ("dt-bindings: lpspi: New property in document DT bindings for LPSPI")
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200807121057.14204-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of the pin control changes for the v5.9 kernel
series:
Core changes:
- The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range()
macro" was put in an immutable branch and merged into the pinctrl
tree as well. We see these changes also here.
- Improved debug output for pins used as GPIO.
New drivers:
- Ocelot Sparx5 SoC driver.
- Intel Emmitsburg SoC subdriver.
- Intel Tiger Lake-H SoC subdriver.
- Qualcomm PM660 SoC subdriver.
- Renesas SH-PFC R8A774E1 subdriver.
Driver improvements:
- Linear improvement and cleanups of the Intel drivers for
Cherryview, Lynxpoint, Baytrail etc. Improved locking among other
things.
- Renesas SH-PFC has added support for RPC pins, groups, and
functions to r8a77970 and r8a77980.
- The newere Freescale (now NXP) i.MX8 pin controllers have been
modularized. This is driven by the Google Android GKI initiative I
think.
- Open drain support for pins on the Qualcomm IPQ4019.
- The Ingenic driver can handle both edges IRQ detection.
- A big slew of documentation fixes all over the place.
- A few irqchip template conversions by yours truly.
* tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
pinctrl: stmfx: Use irqchip template
pinctrl: amd: Use irqchip template
pinctrl: mediatek: fix build for tristate changes
pinctrl: samsung: Use bank name as irqchip name
pinctrl: core: print gpio in pins debugfs file
pinctrl: mediatek: add mt6779 eint support
pinctrl: mediatek: add pinctrl support for MT6779 SoC
pinctrl: mediatek: avoid virtual gpio trying to set reg
pinctrl: mediatek: update pinmux definitions for mt6779
pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API
pinctrl: mcp23s08: Use irqchip template
pinctrl: sx150x: Use irqchip template
dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes
pinctrl: intel: Add Intel Emmitsburg pin controller support
pinctl: ti: iodelay: Replace HTTP links with HTTPS ones
Revert "gpio: omap: handle pin config bias flags"
pinctrl: single: Use fallthrough pseudo-keyword
pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword
pinctrl: baytrail: Use fallthrough pseudo-keyword
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Spelling
- http to https updates
NAND core changes:
- Drop useless 'depends on' in Kconfig
- Add an extra level in the Kconfig hierarchy
- Trivial spellings
- Dynamic allocation of the interface configurations
- Dropping the default ONFI timing mode
- Various cleanup (types, structures, naming, comments)
- Hide the chip->data_interface indirection
- Add the generic rb-gpios property
- Add the ->choose_interface_config() hook
- Introduce nand_choose_best_sdr_timings()
- Use default values for tPROG_max and tBERS_max
- Avoid redefining tR_max and tCCS_min
- Add a helper to find the closest ONFI mode
- bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
- fsl-upm: Deprecation of specific DT properties
- fsl_upm: Driver rework and cleanup in favor of ->exec_op()
- Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
- brcmnand: ECC error handling on EDU transfers
- brcmnand: Don't default to EDU transfers
- qcom: Set BAM mode only if not set already
- qcom: Avoid write to unavailable register
- gpio: Driver rework in favor of ->exec_op()
- tango: ->exec_op() conversion
- mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
- toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4,
TC58NVG0S3E, and TC58TEG5DCLTA00
- hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
SPI NOR core changes:
- Disable Quad Mode in spi_nor_restore().
- Don't abort BFPT parsing when QER reserved value is used.
- Add support/update capabilities for few flashes.
- Drop s70fl01gs flash: it does not support RDSR(05h) which is
critical for erase/write.
- Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during
the release cycle.
SPI NOR controller drivers changes:
- Move the cadence-quadspi driver to spi-mem. The series was taken
through the SPI tree. Merge it also in spi-nor/next to avoid
conflicts during the release cycle.
- intel-spi:
- Add new PCI IDs.
- Ignore the Write Disable command, the controller doesn't support
it.
- Fix performance regression"
* tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits)
MTD: pfow.h: drop a duplicated word
MTD: mtd-abi.h: drop a duplicated word
mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones
mtd: Replace HTTP links with HTTPS ones
mtd: hyperbus: Replace HTTP links with HTTPS ones
mtd: revert "spi-nor: intel: provide a range for poll_timout"
mtd: spi-nor: update read capabilities for w25q64 and s25fl064k
mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
mtd: spi-nor: macronix: Add support for mx66u2g45g
mtd: spi-nor: intel-spi: Simulate WRDI command
mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()
mtd: spi-nor: Add capability to disable flash quad mode
mtd: spi-nor: spansion: Remove s70fl01gs from flash_info
mtd: spi-nor: sfdp: do not make invalid quad enable fatal
dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
mtd: rawnand: stm32_fmc2: get resources from parent node
mtd: rawnand: stm32_fmc2: use regmap APIs
memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation
dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- add COOL/WARM/HOT state from JEITA JISC8712:2015 specification
- convert simple-battery DT binding to YAML
- add long-life charging mode
Battery/charger drivers:
- bq25150: new charger driver
- bq27xxx: add support for BQ27z561 and BQ28z610
- max17040: support CAPACITY_ALERT_MIN
- sbs-battery: add PEC support
- wilco-ec: support long-life charging mode
- bq25890: fix DT binding
- misc. fixes and cleanups
Reset drivers:
- linkstation: new reset driver"
* tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
power: supply: wilco_ec: Add long life charging mode
power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor
dt-bindings: power: Add BQ28z610 compatible
power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor
dt-bindings: power: Add BQ27Z561 compatible
power: supply: test_power: Fix battery_current initial value
power: supply: Fix kerneldoc of power_supply_temp2resist_simple()
power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated()
dt-bindings: power: Convert battery.txt to battery.yaml
power: supply: rt5033_battery: Fix error code in rt5033_battery_probe()
power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN
power: supply: check if calc_soc succeeded in pm860x_init_battery
power: supply: bq2xxxx: Replace HTTP links with HTTPS ones
power: reset: add driver for LinkStation power off
power: supply: sc27xx: prevent adc * 1000 from overflow
math64: New DIV_S64_ROUND_CLOSEST helper
power: fix duplicated words in bq2415x_charger.h
power: Convert to DEFINE_SHOW_ATTRIBUTE
power: reset: keystone-reset: Replace HTTP links with HTTPS ones
power: supply: bq25150 introduce the bq25150
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Fix pci_cfg_wait queue locking problem (Bjorn Helgaas)
- Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi
Saheed)
- Align PCIe capability and PCI accessor return values (Bolarinwa
Olayemi Saheed)
- Fix pci_create_slot() reference count leak (Qiushi Wu)
- Announce device after early fixups (Tiezhu Yang)
PCI device hotplug:
- Make rpadlpar functions static (Wei Yongjun)
Driver binding:
- Add device even if driver attach failed (Rajat Jain)
Virtualization:
- xen: Remove redundant initialization of irq (Colin Ian King)
IOMMU:
- Add pci_pri_supported() to check device or associated PF (Ashok Raj)
- Release IVRS table in AMD ACS quirk (Hanjun Guo)
- Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng)
- Treat "external-facing" devices themselves as internal (Rajat Jain)
MSI:
- Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr
Stankiewicz)
Error handling:
- Clear PCIe Device Status errors only if OS owns AER (Jonathan
Cameron)
- Log correctable errors as warning, not error (Matt Jolly)
- Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc
Van Oostenryck)
Peer-to-peer DMA:
- Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe)
ASPM:
- Add missing newline in sysfs 'policy' (Xiongfeng Wang)
Native PCIe controllers:
- Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng)
- Convert to devm_platform_ioremap_resource() (Dejin Zheng)
- Remove duplicate error message from devm_pci_remap_cfg_resource()
callers (Dejin Zheng)
- Fix runtime PM imbalance on error (Dinghao Liu)
- Remove dev_err() when handing an error from platform_get_irq()
(Krzysztof Wilczyński)
- Use pci_host_bridge.windows list directly instead of splicing in a
temporary list for cadence, mvebu, host-common (Rob Herring)
- Use pci_host_probe() instead of open-coding all the pieces for
altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3,
versatile, xgene, xilinx, xilinx-nwl (Rob Herring)
- Default host bridge parent device to the platform device (Rob
Herring)
- Use pci_is_root_bus() instead of tracking root bus number
separately in aardvark, designware (imx6, keystone,
designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob
Herring)
- Set host bridge bus number in pci_scan_root_bus_bridge() instead of
each driver for aardvark, designware-host, host-common, mediatek,
rcar, tegra, v3-semi (Rob Herring)
- Move DT resource setup into devm_pci_alloc_host_bridge() (Rob
Herring)
- Set bridge map_irq and swizzle_irq to default functions; drivers
that don't support legacy IRQs (iproc) need to undo this (Rob
Herring)
ARM Versatile PCIe controller driver:
- Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring)
Cadence PCIe controller driver:
- Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
(Kishon Vijay Abraham I)
- Remove "mem" from reg binding (Kishon Vijay Abraham I)
- Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I)
- Convert all r/w accessors to perform only 32-bit accesses (Kishon
Vijay Abraham I)
- Add support to start link and verify link status (Kishon Vijay
Abraham I)
- Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I)
- Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I)
- Fix updating Vendor ID and Subsystem Vendor ID register (Kishon
Vijay Abraham I)
- Use bridge resources for outbound window setup (Rob Herring)
- Remove private bus number and range storage (Rob Herring)
Cadence PCIe endpoint driver:
- Add MSI-X support (Alan Douglas)
HiSilicon PCIe controller driver:
- Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring)
Intel VMD host bridge driver:
- Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick)
Loongson PCIe controller driver:
- Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang)
Marvell Aardvark PCIe controller driver:
- Indicate error in 'val' when config read fails (Pali Rohár)
- Don't touch PCIe registers if no card connected (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Setup BAR0 in order to fix MSI (Shmuel Hazan)
Microsoft Hyper-V host bridge driver:
- Fix a timing issue which causes kdump to fail occasionally (Wei Hu)
- Make some functions static (Wei Yongjun)
NVIDIA Tegra PCIe controller driver:
- Revert tegra124 raw_violation_fixup (Nicolas Chauvet)
- Remove PLL power supplies (Thierry Reding)
Qualcomm PCIe controller driver:
- Change duplicate PCI reset to phy reset (Abhishek Sahu)
- Add missing ipq806x clocks in PCIe driver (Ansuel Smith)
- Add missing reset for ipq806x (Ansuel Smith)
- Add ext reset (Ansuel Smith)
- Use bulk clk API and assert on error (Ansuel Smith)
- Add support for tx term offset for rev 2.1.0 (Ansuel Smith)
- Define some PARF params needed for ipq8064 SoC (Ansuel Smith)
- Add ipq8064 rev2 variant (Ansuel Smith)
- Support PCI speed set for ipq806x (Sham Muthayyan)
Renesas R-Car PCIe controller driver:
- Use devm_pci_alloc_host_bridge() (Rob Herring)
- Use struct pci_host_bridge.windows list directly (Rob Herring)
- Convert rcar-gen2 to use modern host bridge probe functions (Rob
Herring)
TI J721E PCIe driver:
- Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I)
Xilinx Versal CPM PCIe controller driver:
- Add Versal CPM Root Port driver and YAML schema (Bharat Kumar
Gogada)
MicroSemi Switchtec management driver:
- Add missing __iomem and __user tags to fix sparse warnings (Logan
Gunthorpe)
Miscellaneous:
- Replace http:// links with https:// (Alexander A. Klimov)
- Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn
Helgaas)
- Remove unused pci_lost_interrupt() (Heiner Kallweit)
- Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen)
- Fix kerneldoc warnings (Krzysztof Kozlowski)"
* tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
PCI: Fix kerneldoc warnings
PCI: xilinx-cpm: Add Versal CPM Root Port driver
PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port
PCI: Set bridge map_irq and swizzle_irq to default functions
PCI: Move DT resource setup into devm_pci_alloc_host_bridge()
PCI: rcar-gen2: Convert to use modern host bridge probe functions
PCI: Remove dev_err() when handing an error from platform_get_irq()
MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
misc: pci_endpoint_test: Add J721E in pci_device_id table
PCI: j721e: Add TI J721E PCIe driver
PCI: switchtec: Add missing __iomem tag to fix sparse warnings
PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings
PCI: rpadlpar: Make functions static
PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs
PCI: Release IVRS table in AMD ACS quirk
PCI: Announce device after early fixups
PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken
PCI: Remove unused pci_lost_interrupt()
dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"It looks like a smaller batch of clk updates this time around.
In the core framework we just have some minor tweaks and a debugfs
feature, so not much to see there. The driver updates are fairly well
split between AT91 and Qualcomm clk support. Adding those two drivers
together equals about 50% of the diffstat.
Otherwise, the big amount of work this time was on supporting
Broadcom's Raspberry Pi firmware clks.
Highlights:
Core:
- Document clk_hw_round_rate() so it gets some more use
- Remove unused __clk_get_flags()
- Add a prepare/enable debugfs feature similar to rate setting
New Drivers:
- Add support for SAMA7G5 SoC clks
- Enable CPU clks on Qualcomm IPQ6018 SoCs
- Enable CPU clks on Qualcomm MSM8996 SoCs
- GPU clk support for Qualcomm SM8150 and SM8250 SoCs
- Audio clks on Qualcomm SC7180 SoCs
- Microchip Sparx5 DPLL clk
- Add support for the new Renesas RZ/G2H (R8A774E1) SoC
Updates:
- Make defines for bcm63xx-gate clks to use in DT
- Support BCM2711 SoC firmware clks
- Add HDMI clks for BCM2711 SoCs
- Add RTC related clks on Ingenic SoCs
- Support USB PHY clks on Ingenic SoCs
- Support gate clks on BCM6318 SoCs
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
- Use poll_timeout functions in Rockchip clk driver
- Support Rockchip rk3288w SoC variant
- Mark mac_lbtest critical on Rockchip rk3188
- Add CAAM clock support for i.MX vf610 driver
- Add MU root clock support for i.MX imx8mp driver
- Amlogic g12: add neural network accelerator clock sources
- Amlogic meson8: remove critical flag for main PLL divider
- Amlogic meson8: add video decoder clock gates
- Convert one more Renesas DT binding to json-schema
- Enhance critical clock handling on Renesas platforms to only
consider clocks that were enabled at boot time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits)
clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
ipq806x: gcc: add support for child probe
clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
clk: qcom: ipq8074: Add correct index for PCIe clocks
clk: <linux/clk-provider.h>: drop a duplicated word
clk: renesas: cpg-mssr: Add r8a774e1 support
dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
clk: Drop duplicate selection in Kconfig
clk: qcom: smd: Add support for MSM8992/4 rpm clocks
clk: qcom: ipq8074: Add missing clocks for pcie
dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
Replace HTTP links with HTTPS ones: Common CLK framework
clk: qcom: Add CPU clock driver for msm8996
dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
soc: qcom: Separate kryo l2 accessors from PMU driver
clk: meson: meson8b: add the vclk2_en gate clock
clk: meson: meson8b: add the vclk_en gate clock
clk: qcom: Fix return value check in apss_ipq6018_probe()
clk: bcm: dvp: Add missing module informations
clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly ARM cpufreq driver updates plus a cpufreq core
cleanup, an ARM-wide change to make schedutil the default scaling
governor, an intel_pstate driver fix and some runtime PM changes
regarding kerneldoc comments.
Specifics:
- Add adaptive voltage scaling (AVS) support to the brcmstb cpufreq
driver and clean it up (Florian Fainelli, Markus Mayer).
- Add a new Tegra cpufreq driver and clean up the existing one (Jon
Hunter, Sumit Gupta).
- Add bandwidth level support to the Qcom cpufreq driver along with
OPP changes (Sibi Sankar).
- Clean up the sti, cpufreq-dt, ap806, CPPC cpufreq drivers (Viresh
Kumar, Lee Jones, Ivan Kokshaysky, Sven Auhagen, Xin Hao).
- Make schedutil the default governor for ARM (Valentin Schneider).
- Fix dependency issues for the imx cpufreq driver (Walter Lozano).
- Clean up cached_resolved_idx handlihng in the cpufreq core (Viresh
Kumar).
- Fix the intel_pstate driver to use the correct maximum frequency
value when MSR_TURBO_RATIO_LIMIT is 0 (Srinivas Pandruvada).
- Provide kenrneldoc comments for multiple runtime PM helpers and
improve the pm_runtime_get_if_active() kerneldoc (Rafael Wysocki)"
* tag 'pm-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0
PM: runtime: Improve kerneldoc of pm_runtime_get_if_active()
PM: runtime: Add kerneldoc comments to multiple helpers
cpufreq: make schedutil the default for arm and arm64
cpufreq: cached_resolved_idx can not be negative
cpufreq: Add Tegra194 cpufreq driver
dt-bindings: arm: Add NVIDIA Tegra194 CPU Complex binding
cpufreq: imx: Select NVMEM_IMX_OCOTP
cpufreq: sti-cpufreq: Fix some formatting and misspelling issues
cpufreq: tegra186: Simplify probe return path
cpufreq: CPPC: Reuse caps variable in few routines
cpufreq: ap806: fix cpufreq driver needs ap cpu clk
cpufreq: cppc: Reorder code and remove apply_hisi_workaround variable
cpufreq: dt: fix oops on armada37xx
cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVS
cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware
cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command()
cpufreq: qcom: Disable fast switch when scaling DDR/L3
cpufreq: qcom: Update the bandwidth levels on frequency change
OPP: Add and export helper to set bandwidth
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Legacy soc_camera driver was removed from staging
- New I2C sensor related drivers: dw9768, ch7322, max9271, rdacm20
- TI vpe driver code was re-organized and had new features added
- Added Xilinx MIPI CSI-2 Rx Subsystem driver
- Added support for Infrared Toy and IR Droid devices
- Lots of random driver fixes, new features and cleanups
* tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (318 commits)
media: camss: fix memory leaks on error handling paths in probe
media: davinci: vpif_capture: fix potential double free
media: radio: remove redundant assignment to variable retval
media: allegro: fix potential null dereference on header
media: mtk-mdp: Fix a refcounting bug on error in init
media: allegro: fix an error pointer vs NULL check
media: meye: fix missing pm_mchip_mode field
media: cafe-driver: use generic power management
media: saa7164: use generic power management
media: v4l2-dev/ioctl: Fix document for VIDIOC_QUERYCAP
media: v4l2: Correct kernel-doc inconsistency
media: v4l2: Correct kernel-doc inconsistency
media: dvbdev.h: keep * together with the type
media: v4l2-subdev.h: keep * together with the type
media: videobuf2: Print videobuf2 buffer state by name
media: colorspaces-details.rst: fix V4L2_COLORSPACE_JPEG description
media: tw68: use generic power management
media: meye: use generic power management
media: cx88: use generic power management
media: cx25821: use generic power management
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"mediatek:
- add support for mt6779 gce
- shutdown cleanup and address shift support
qcom:
- add msm8994 apcs and sdm660 hmss compatibility
imx:
- mark PM funcs __maybe
pcc:
- put acpi table before bailout
misc:
- replace http with https links"
* tag 'mailbox-v5.9' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: mediatek: cmdq: clear task in channel before shutdown
mailbox: cmdq: support mt6779 gce platform definition
mailbox: cmdq: variablize address shift in platform
dt-binding: gce: add gce header file for mt6779
mailbox: qcom: Add msm8994 apcs compatible
mailbox: qcom: Add sdm660 hmss compatible
mailbox: imx: Mark PM functions as __maybe_unused
mailbox: pcc: Put the PCCT table for error path
mailbox: Replace HTTP links with HTTPS ones
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Other:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers"
* tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits)
dmaengine: dw: Don't include unneeded header to platform data header
dmaengine: Actions: Add support for S700 DMA engine
dmaengine: Actions: get rid of bit fields from dma descriptor
dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml
dmaengine: idxd: add missing invalid flags field to completion
dmaengine: dw: Initialize max_sg_burst capability
dmaengine: dw: Introduce max burst length hw config
dmaengine: dw: Initialize min and max burst DMA device capability
dmaengine: dw: Set DMA device max segment size parameter
dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config
dmaengine: Introduce DMA-device device_caps callback
dmaengine: Introduce max SG burst capability
dmaengine: Introduce min burst length capability
dt-bindings: dma: dw: Add max burst transaction length property
dt-bindings: dma: dw: Convert DW DMAC to DT binding
dmaengine: ti: k3-udma: Query throughput level information from hardware
dmaengine: ti: k3-udma: Use defines for capabilities register parsing
dmaengine: xilinx: dpdma: Fix kerneldoc warning
dmaengine: xilinx: dpdma: add missing kernel doc
dmaengine: xilinx: dpdma: remove comparison of unsigned expression
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next
Core changes:
* Drop useless 'depends on' in Kconfig
* Add an extra level in the Kconfig hierarchy
* Trivial spellings
* Dynamic allocation of the interface configurations
* Dropping the default ONFI timing mode
* Various cleanup (types, structures, naming, comments)
* Hide the chip->data_interface indirection
* Add the generic rb-gpios property
* Add the ->choose_interface_config() hook
* Introduce nand_choose_best_sdr_timings()
* Use default values for tPROG_max and tBERS_max
* Avoid redefining tR_max and tCCS_min
* Add a helper to find the closest ONFI mode
* bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
* fsl-upm: Deprecation of specific DT properties
* fsl_upm: Driver rework and cleanup in favor of ->exec_op()
* Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
* brcmnand: ECC error handling on EDU transfers
* brcmnand: Don't default to EDU transfers
* qcom: Set BAM mode only if not set already
* qcom: Avoid write to unavailable register
* gpio: Driver rework in favor of ->exec_op()
* tango: ->exec_op() conversion
* mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
* toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
* toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
* toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
* hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
|
|
Conflicts:
Documentation/driver-api/dmaengine/provider.rst
include/linux/dmaengine.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add support to enable/disable the thermal zones resulting on core
code and drivers cleanup (Andrzej Pietrasiewicz)
- Add generic netlink support for userspace notifications: events,
temperature and discovery commands (Daniel Lezcano)
- Fix redundant initialization for a ret variable (Colin Ian King)
- Remove the clock cooling code as it is used nowhere (Amit Kucheria)
- Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian
Rotariu)
- Replace all references to thermal.txt in the documentation to the
corresponding yaml files (Amit Kucheria)
- Add maintainer entry for the IPA (Lukasz Luba)
- Add support for MSM8939 for the tsens (Shawn Guo)
- Update power allocator and devfreq cooling to SPDX licensing (Lukasz
Luba)
- Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)
- Add tsensor support for V2 mediatek thermal system (Henry Yen)
- Fix thermal zone lookup by ID for the core code (Thierry Reding)
* tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits)
thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support
thermal: mediatek: Add tsensor support for V2 thermal system
thermal: mediatek: Prepare to add support for other platforms
thermal: Update power allocator and devfreq cooling to SPDX licensing
MAINTAINERS: update entry to thermal governors file name prefixing
thermal: core: Add thermal zone enable/disable notification
thermal: qcom: tsens-v0_1: Add support for MSM8939
dt-bindings: tsens: qcom: Document MSM8939 compatible
thermal: core: Fix thermal zone lookup by ID
thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id
thermal: imx8mm: Support module autoloading
thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
MAINTAINERS: Add maintenance information for IPA
thermal: rcar_gen3_thermal: Do not shadow thcode variable
dt-bindings: thermal: Get rid of thermal.txt and replace references
thermal: core: Move initialization after core initcall
thermal: netlink: Improve the initcall ordering
net: genetlink: Move initialization to core_initcall
thermal: rcar_gen3_thermal: Add r8a774e1 support
thermal/drivers/clock_cooling: Remove clock_cooling code
...
|
|
Add basic support for an optional reset gpio.
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200805160520.456570-4-sebastian.reichel@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This adds support for EXC80H60 and EXCH84 controllers, which
use a different event type id and have two extra bits for the
resolution (so the maximum is 16K instead of 4K).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200805160520.456570-3-sebastian.reichel@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
Bruce Ashfield
Linus Torvalds
Geert Uytterhoeven
Madalin Bucur
Rob Herring
Anup Patel
Fabio Estevam
Lokesh Vutla
Alexander A. Klimov
Roger Quadros
Liam Beguin
Richard Weinberger
Vinod Koul
Sebastian Reichel