aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/power
AgeCommit message (Collapse)Author
2020-10-07dt-bindings: Explicitly allow additional properties in common schemasRob Herring
In order to add meta-schema checks for additional/unevaluatedProperties being present, all schema need to make this explicit. As common/shared schema are included by other schemas, they should always allow for additionalProperties. Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201005183830.486085-5-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-07dt-bindings: Add missing 'unevaluatedProperties'Rob Herring
This doesn't yet do anything in the tools, but make it explicit so we can check either 'unevaluatedProperties' or 'additionalProperties' is present in schemas. 'unevaluatedProperties' is appropriate when including another schema (via '$ref') and all possible properties and/or child nodes are not explicitly listed in the schema with the '$ref'. This is in preparation to add a meta-schema to check for missing 'unevaluatedProperties' or 'additionalProperties'. This has been a constant source of review issues. Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20201005183830.486085-2-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-06dt-bindings: Another round of adding missing 'additionalProperties'Rob Herring
Another round of wack-a-mole. The json-schema default is additional unknown properties are allowed, but for DT all properties should be defined. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewd-by: Corey Minyard <cminyard@mvista.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Sebastian Reichel <sre@kernel.org> Link: https://lore.kernel.org/r/20201002234143.3570746-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-09-15dt-bindings: power: Correct interrupt flags in examplesKrzysztof Kozlowski
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted some logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200908145922.4502-1-krzk@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-09-14dt-bindings: power: fsl,imx-gpcv2: Document interrupt controller propertiesKrzysztof Kozlowski
The i.MX General Power Controller v2 is also an interrupt controller so document additional properties to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpc@303a0000: '#interrupt-cells', 'interrupt-controller' do not match any of the regexes: 'pinctrl-[0-9]+' Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200904145312.10960-2-krzk@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-14dt-bindings: Whitespace clean-ups in schema filesRob Herring
Clean-up incorrect indentation, extra spaces, long lines, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (which I plan to integrate into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-07Merge tag 'for-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add COOL/WARM/HOT state from JEITA JISC8712:2015 specification - convert simple-battery DT binding to YAML - add long-life charging mode Battery/charger drivers: - bq25150: new charger driver - bq27xxx: add support for BQ27z561 and BQ28z610 - max17040: support CAPACITY_ALERT_MIN - sbs-battery: add PEC support - wilco-ec: support long-life charging mode - bq25890: fix DT binding - misc. fixes and cleanups Reset drivers: - linkstation: new reset driver" * tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: supply: wilco_ec: Add long life charging mode power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor dt-bindings: power: Add BQ28z610 compatible power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor dt-bindings: power: Add BQ27Z561 compatible power: supply: test_power: Fix battery_current initial value power: supply: Fix kerneldoc of power_supply_temp2resist_simple() power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated() dt-bindings: power: Convert battery.txt to battery.yaml power: supply: rt5033_battery: Fix error code in rt5033_battery_probe() power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN power: supply: check if calc_soc succeeded in pm860x_init_battery power: supply: bq2xxxx: Replace HTTP links with HTTPS ones power: reset: add driver for LinkStation power off power: supply: sc27xx: prevent adc * 1000 from overflow math64: New DIV_S64_ROUND_CLOSEST helper power: fix duplicated words in bq2415x_charger.h power: Convert to DEFINE_SHOW_ATTRIBUTE power: reset: keystone-reset: Replace HTTP links with HTTPS ones power: supply: bq25150 introduce the bq25150 ...
2020-08-06Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS upates from Thomas Bogendoerfer: - improvements for Loongson64 - extended ingenic support - removal of not maintained paravirt system type - cleanups and fixes * tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits) MIPS: SGI-IP27: always enable NUMA in Kconfig MAINTAINERS: Update KVM/MIPS maintainers MIPS: Update default config file for Loongson-3 MIPS: KVM: Add kvm guest support for Loongson-3 dt-bindings: mips: Document Loongson kvm guest board MIPS: handle Loongson-specific GSExc exception MIPS: add definitions for Loongson-specific CP0.Diag1 register MIPS: only register FTLBPar exception handler for supported models MIPS: ingenic: Hardcode mem size for qi,lb60 board MIPS: DTS: ingenic/qi,lb60: Add model and memory node MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB MIPS: head.S: Init fw_passed_dtb to builtin DTB of: address: Fix parser address/size cells initialization of_address: Guard of_bus_pci_get_flags with CONFIG_PCI MIPS: DTS: Fix number of msi vectors for Loongson64G MIPS: Loongson64: Add ISA node for LS7A PCH MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH MIPS: Loongson64: Enlarge IO_SPACE_LIMIT MIPS: Loongson64: Process ISA Node in DeviceTree of_address: Add bus type match for pci ranges parser ...
2020-07-29dt-bindings: power: Add BQ28z610 compatibleDan Murphy
Add the Texas Instruments bq28z610 battery monitor to the bq27xxx binding. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-29dt-bindings: power: Add BQ27Z561 compatibleDan Murphy
Add the Texas Instruments bq27z561 battery monitor to the bq27xxx binding. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-29dt-bindings: power: Convert battery.txt to battery.yamlDan Murphy
Convert the battery.txt file to yaml and fix up the examples. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> [Fixed the regex for ocv-capacity-table and the DT example for it] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-21dt-bindings: power: Add the bindings for the bq2515x family of chargers.Ricardo Rivera-Matos
The BQ2515X family of devices are highly integrated battery management ICs that integrate the most common functions for wearable devices namely a charger, an output voltage rail, ADC for battery and system monitoring, and a push-button controller. Datasheets: http://www.ti.com/lit/ds/symlink/bq25150.pdf http://www.ti.com/lit/ds/symlink/bq25155.pdf Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-21dt-bindings: power: Convert mti,mips-cpc to DT schemaSerge Semin
It's a Cluster Power Controller embedded into the MIPS IP cores. Currently the corresponding dts node is supposed to have compatible and reg properties. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-13dt-bindings: power: renesas,rcar-sysc: Document r8a774e1 SYSC bindingMarian-Cristian Rotariu
Document bindings for the RZ/G2H (aka R8A774E1) SYSC block. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594138692-16816-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-19power: supply: gpio-charger: Make gpios optionalSebastian Reichel
While strongly recommended, not all devices have a gpio to detect if the charger is connected. This moves the 'gpios' from required to optional section. This also modifies error handling for the GPIO a bit: We no longer fallback to pdata, if a GPIO is specified using GPIO descriptor tables. This is a bit cleaner and does not have any real impact: There are only two mainline pdata users (arm/mach-sa1100/collie.c, arm/mach-pxa/tosa.c) and none of them specify the GPIO via gpiod descriptor tables. Once both have been converted the driver's support for specifying GPIOs numbers in pdata will be dropped. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-06-19dt-bindings: power: supply: gpio-charger: convert to yamlSebastian Reichel
Convert the gpio-charger bindings from text format to new YAML based representation. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-06-19dt-bindings: power: supply: bq25890: Document required interruptKrzysztof Kozlowski
The driver requires interrupts (fails probe if it is not provided) so document this requirement in bindings. Fixes: 4aeae9cb0dad ("power_supply: Add support for TI BQ25890 charger chip") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-06-19dt-bindings: power: supply: bq25890: Indent example with tabsKrzysztof Kozlowski
Fix example indentation to tabs to follow generic Linux coding style. This avoids copying the space indentation to DTS when re-using the example. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-06-11dt-bindings: Remove more cases of 'allOf' containing a '$ref'Rob Herring
Another round of 'allOf' removals that came in this cycle. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-10Merge tag 'for-v5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "This time there are lots of changes. Quite a few changes to the core, lots of driver changes and one change to kobject core (with Ack from Greg). Summary: kobject: - Increase number of allowed uevent variables power-supply core: - Add power-supply type in uevent - Cleanup property handling in core - Make property and usb_type pointers const - Convert core power-supply DT binding to YAML - Cleanup HWMON code - Add new health status "calibration required" - Add new properties for manufacture date and capacity error margin battery drivers: - new cw2015 battery driver used by pine64 Pinebook Pro laptop - axp22: blacklist on Meegopad T02 - sc27xx: support current/voltage reading - max17042: support time-to-empty reading - simple-battery: add more battery parameters - bq27xxx: convert DT binding document to YAML - sbs-battery: add TI BQ20Z65 support, fix technology property, convert DT binding to YAML, add option to disable charger broadcasts, add new properties: manufacture date, capacity error margin, average current, charge current and voltage and support calibration required health status - misc fixes charger drivers: - bq25890: cleanup, implement charge type, precharge current and input current limiting properties - bd70528: use new linear range helper library - bd99954: new charger driver - mp2629: new charger driver - misc fixes reboot drivers: - oxnas-restart: introduce new driver - syscon-reboot: convert DT binding to YAML, add parent syscon device support - misc fixes" * tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits) power: supply: cw2015: Attach OF ID table to the driver power: reset: gpio-poweroff: add missing '\n' in dev_err() Revert "power: supply: sbs-battery: simplify read_read_string_data" Revert "power: supply: sbs-battery: add PEC support" dt-bindings: power: sbs-battery: Convert to yaml power: supply: sbs-battery: constify power-supply property array power: supply: sbs-battery: switch to i2c's probe_new power: supply: sbs-battery: switch from of_property_* to device_property_* power: supply: sbs-battery: add ability to disable charger broadcasts power: supply: sbs-battery: fix idle battery status power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support power: supply: sbs-battery: add MANUFACTURE_DATE support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support power: supply: sbs-battery: add PEC support power: supply: sbs-battery: simplify read_read_string_data power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support power: supply: sbs-battery: Add TI BQ20Z65 support power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED ...
2020-06-04Merge tag 'devicetree-for-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Convert various DT (non-binding) doc files to ReST - Various improvements to device link code - Fix __of_attach_node_sysfs refcounting bug - Add support for 'memory-region-names' with reserved-memory binding - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics, Shanghai Awinic Technology Co., MikroTik, Silex Insight - A bunch more binding conversions to DT schema. Only 3K to go. - Add a minimum version check for schema tools - Treewide dropping of 'allOf' usage with schema references. Not needed in new json-schema spec. - Some formatting clean-ups of schemas * tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits) dt-bindings: clock: Add documentation for X1830 bindings. dt-bindings: mailbox: Convert imx mu to json-schema dt-bindings: power: Convert imx gpcv2 to json-schema dt-bindings: power: Convert imx gpc to json-schema dt-bindings: Merge gpio-usb-b-connector with usb-connector dt-bindings: timer: renesas: cmt: Convert to json-schema dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema dt-bindings: timer: Convert i.MX GPT to json-schema dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742 dt-bindings: serial: Add binding for UART pin swap dt-bindings: geni-se: Add interconnect binding for GENI QUP dt-bindings: geni-se: Convert QUP geni-se bindings to YAML dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix dt-bindings: input: touchscreen: edt-ft5x06: change reg property dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver dt-bindings: timer: renesas: mtu2: Convert to json-schema of/fdt: Remove redundant kbasename function call dt-bindings: clock: Convert i.MX1 clock to json-schema dt-bindings: clock: Convert i.MX21 clock to json-schema dt-bindings: clock: Convert i.MX25 clock to json-schema ...
2020-06-04Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
2020-06-01dt-bindings: power: Convert imx gpcv2 to json-schemaAnson Huang
Convert the i.MX GPCv2 binding to DT schema format using json-schema Example is updated based on latest DT file and consumer's example is removed since it is NOT that useful. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-01dt-bindings: power: Convert imx gpc to json-schemaAnson Huang
Convert the i.MX GPC binding to DT schema format using json-schema >From latest reference manual, there is actually ONLY 1 interrupt for GPC, so the additional GPC interrupt is removed. Consumer's example is also removed since it is NOT that useful. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-29dt-bindings: power: sbs-battery: Convert to yamlSebastian Reichel
Convert sbs-battery bindings to YAML. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add ability to disable charger broadcastsJean-Francois Dagenais
In certain designs, it is possible to add a battery on a populated i2c bus without an sbs compliant charger. In that case, the battery will unnecessarily and sometimes undesirably master the bus trying to write info in the charger. It is observed in many occasion that these battery "broadcasts" are even corrupting other ongoing master to slave communication. I.e. the multi-master support in the battery is inadequate. Thankfully, the CHARGER_MODE bit allows designers to disable that SBS battery behaviour. This needs to be done once when the battery is first seen on the bus. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> [rebased code] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28dt-bindings: power: renesas,apmu: Document r8a7742 supportLad Prabhakar
Document APMU and SMP enable method for RZ/G1H (also known as r8a7742) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-28power: supply: sbs-battery: Add TI BQ20Z65 supportSebastian Reichel
Add support for BQ20Z65 manufacturer data to the sbs-battery driver. Implementation has been verified using the public TRM available from [0] and tested using a GE Flex 3S2P battery. [0] http://www.ti.com/lit/pdf/sluu386 Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28dt-bindings: power: reset: Unrequire regmap property in syscon-reboot nodeSerge Semin
Since normally syscon-reboot block is supposed to be a part of a system controller, lets mark the regmap property as deprecated and recommend the syscon-reboot node to be a sub-node of SYSCON. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-25Merge tag 'qcom-drivers-for-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.8 This contains a large set of cleanups, bug fixes, general improvements and documentation fixes for the RPMH driver. It adds a debugfs mechanism for inspecting Command DB. Socinfo got the "soc_id" attribute defines and definitions for a various variants of MSM8939. RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH had to be reverted due to a compilation issue when tracing is enabled. RPMHPD gained power-domains for the SM8250 voltage corners. The SCM driver gained fixes for two build warnings and the SMP2P had an unnecessary error print removed. * tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (42 commits) Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module" soc: qcom: rpmh-rsc: Remove the pm_lock soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lock kernel/cpu_pm: Fix uninitted local in cpu_pm soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BAD soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notifications firmware: qcom_scm-legacy: Replace zero-length array with flexible-array soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync() soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc ids soc: qcom: aoss: Add SM8250 compatible soc: qcom: pdr: Remove impossible error condition soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner soc: qcom: rpmhpd: Add SM8250 power domains firmware: qcom_scm: fix bogous abuse of dma-direct internals dt-bindings: soc: qcom: apr: Use generic node names for APR services firmware: qcom_scm: Remove unneeded conversion to bool soc: qcom: cmd-db: Properly endian swap the slv_id for debugfs soc: qcom: cmd-db: Use 5 digits for printing address soc: qcom: cmd-db: Cast sizeof() to int to silence field width warning ... Link: https://lore.kernel.org/r/20200519052533.1250024-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-19dt-bindings: power: meson-ee-pwrc: add support for the Meson GX SoCsMartin Blumenstingl
The power domains on the GX SoCs are very similar to G12A. The only known differences so far are: - The GX SoCs do not have the HHI_VPU_MEM_PD_REG2 register (for the VPU power-domain) - The GX SoCs have an additional reset line called "dvin" Add a new compatible string and adjust the reset line expectations for these SoCs. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200515204709.1505498-3-martin.blumenstingl@googlemail.com
2020-05-19dt-bindings: power: meson-ee-pwrc: add support for Meson8/8b/8m2Martin Blumenstingl
The power domains on the 32-bit Meson8/Meson8b/Meson8m2 SoCs are very similar to what G12A still uses. The (known) differences are: - Meson8 doesn't use any reset lines at all - Meson8b and Meson8m2 use the same reset lines, which are different from what the 64-bit SoCs use - there is no "vapb" clock on the older SoCs - amlogic,ao-sysctrl cannot point to the whole AO sysctrl region but only the power management related registers Add a new compatible string and adjust clock and reset line expectations for each SoC. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200515204709.1505498-2-martin.blumenstingl@googlemail.com
2020-05-17dt-bindings: power: Convert bq27xxx dt to yamlDan Murphy
Convert the bq27xxx.txt to yaml format CC: Pali Rohár <pali@kernel.org> CC: Andrew F. Davis <afd@ti.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10dt_bindings: ROHM BD99954 ChargerMatti Vaittinen
The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion secondary battery. Intended to be used in space-constraint equipment such as Low profile Notebook PC, Tablets and other applications. BD99954 provides a Dual-source Battery Charger, two port BC1.2 detection and a Battery Monitor. Document the DT bindings for BD99954 Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10dt-bindings: battery: add new battery parametersMatti Vaittinen
Add: - trickle-charge-current-microamp: Some chargers have 3 charging stages. First one when battery is almost empty is often called as trickle-charge. Last state when battery has been "woken up" is usually called as fast-charge. In addition to this some chargers have a 'middle state' which ROHM BD99954 data-sheet describes as pre-charge. Some batteries can benefit from this 3-phase charging [citation needed]. Introduce trickle-charge-current-microamp so that batteries can give charging current limit for all three states. - precharge-upper-limit-microvolt: When battery voltage has reached certain limit we change from trickle-charge to next charging state (pre-charge for BD99954). Allow battery to specify this limit. - re-charge-voltage-microvolt: Allow giving a battery specific voltage limit for chargers which can automatically re-start charging when battery has discharghed down to this limit. - over-voltage-threshold-microvolt Allow specifying voltage threshold after which the battery is assumed to be faulty. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-09dt-bindings: power: reset: Convert syscon-reboot-mode to DT schemaSerge Semin
Modern device tree bindings are supposed to be created as YAML-files in accordance with dt-schema. This commit replaces SYSCON reboot-mode legacy bare text bindings with YAML file. As before the bindings file states that the corresponding dts node is supposed to be compatible "syscon-reboot-mode" device and necessarily have an offset property to determine which register from the regmap is supposed to keep the mode on reboot. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-03dt-bindings: Remove cases of 'allOf' containing a '$ref'Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Scripted with ruamel.yaml with some manual fixups. Some minor whitespace changes from the script. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: power: supply: add cw2015_battery bindingsTobias Schramm
This patch adds the dts binding schema for the cw2015 fuel gauge. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-02dt-bindings: power: Convert power_supply text to yamlDan Murphy
Convert the power_supply.txt to power-supply.yaml. This conversion entailed fixing up the binding to being yaml and dt checker compliant. Added a note in the power_supply.txt to reference the power-supply.yaml Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-04-28dt-bindings: power: rcar-sysc: Document r8a7742 SYSC bindingLad Prabhakar
Add binding documentation for the RZ/G1H (R8A7742) SYSC block. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1587678050-23468-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-20soc: qcom: rpmhpd: Add SM8250 power domainsBjorn Andersson
Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200415062154.741179-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-03Merge tag 'arm-drivers-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "These are the usual updates for SoC specific device drivers and related subsystems that don't have their own top-level maintainers: - ARM SCMI/SCPI updates to allow pluggable transport layers - TEE subsystem cleanups - A new driver for the Amlogic secure power domain controller - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and TI OMAP2+ sysc drivers. - Qualcomm SoC driver updates, including a new library module for "protection domain" notifications - Lots of smaller bugfixes and cleanups in other drivers" * tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits) soc: fsl: qe: fix sparse warnings for ucc_slow.c soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure soc: fsl: qe: fix sparse warnings for ucc_fast.c soc: fsl: qe: fix sparse warnings for qe_ic.c soc: fsl: qe: fix sparse warnings for ucc.c soc: fsl: qe: fix sparse warning for qe_common.c soc: fsl: qe: fix sparse warnings for qe.c soc: qcom: Fix QCOM_APR dependencies soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb soc: imx: drop COMPILE_TEST for IMX_SCU_SOC firmware: imx: add COMPILE_TEST for IMX_SCU driver soc: imx: gpc: fix power up sequencing soc: imx: increase build coverage for imx8m soc driver soc: qcom: apr: Add avs/audio tracking functionality dt-bindings: soc: qcom: apr: Add protection domain bindings soc: qcom: Introduce Protection Domain Restart helpers devicetree: bindings: firmware: add ipq806x to qcom_scm memory: tegra: Correct debugfs clk rate-range on Tegra124 memory: tegra: Correct debugfs clk rate-range on Tegra30 memory: tegra: Correct debugfs clk rate-range on Tegra20 ...
2020-03-31dt-bindings: power: Fix example for power-domainUlf Hansson
The change that converted the domain-idle-states DT bindings to the json-schema, forgot to update the corresponding example for the power-domain binding. Let's fix it. Fixes: 3261227d136d ("dt-bindings: power: Convert domain-idle-states bindings to json-schema") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: Add missing 'additionalProperties: false'Rob Herring
Setting 'additionalProperties: false' is frequently omitted, but is important in order to check that there aren't extra undocumented properties in a binding. Ideally, we'd just add this automatically and make this the default, but there's some cases where it doesn't work. For example, if a common schema is referenced, then properties in the common schema aren't part of what's considered for 'additionalProperties'. Also, sometimes there are bus specific properties such as 'spi-max-frequency' that go into bus child nodes, but aren't defined in the child node's schema. So let's stick with the json-schema defined default and add 'additionalProperties: false' where needed. This will be a continual review comment and game of wack-a-mole. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Stephen Boyd <sboyd@kernel.org> # clock Acked-by: Lee Jones <lee.jones@linaro.org>
2020-03-10Merge branch 'dt/linus' into dt/nextRob Herring
2020-03-06dt-bindings: power: Extend nodename pattern for power-domain providersUlf Hansson
The existing binding requires the nodename to have a '@', which is a bit limiting for the wider use case. Therefore, let's extend the pattern to allow either '@' or '-'. Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [robh: drop example change] Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-04dt-bindings: power: Convert domain-idle-states bindings to json-schemaUlf Hansson
While converting to the json-schema, let's also take the opportunity to further specify/clarify some more details about the DT binding. For example, let's define the label where to put the states nodes, set a pattern for nodename of the state nodes and finally add an example. Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [robh: drop type refs from standard unit properties] Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-03dt-bindings: power: Fix dt_binding_check errorJianxin Pan
Missing ';' in the end of secure-monitor example node. Fixes: 165b5fb294e8 ("dt-bindings: power: add Amlogic secure power domains bindings") Reported-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/1583164448-83438-1-git-send-email-jianxin.pan@amlogic.com
2020-02-28dt-bindings: power: apmu: Convert to json-schemaGeert Uytterhoeven
Convert the Renesas Advanced Power Management Unit Device Tree binding documentation to json-schema. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-28dt-bindings: power: rcar-sysc: Convert to json-schemaGeert Uytterhoeven
Convert the Renesas R-Car System Controller Device Tree binding documentation to json-schema. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Rob Herring <robh@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-26 14:44:28 +0000