| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull bootconfig fixes from Steven Rostedt:
"Have bootconfig size and checksum be little endian
In case the bootconfig is created on one kind of endian machine, and
then read on the other kind of endian kernel, the size and checksum
will be incorrect. Instead, have both the size and checksum always be
little endian and have the tool and the kernel convert it from little
endian to or from the host endian"
* tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
docs: bootconfig: Add the endianness of fields
tools/bootconfig: Store size and checksum in footer as le32
bootconfig: Load size and checksum in the footer as le32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
* tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always check to put back before stamp when crossing pages
ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
ftrace: Fix updating FTRACE_FL_TRAMP
tracing: Fix alignment of static buffer
tracing: Remove WARN_ON in start_thread()
samples/ftrace: Mark my_tramp[12]? global
ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()
ring-buffer: Update write stamp with the correct ts
docs: bootconfig: Update file format on initrd image
tools/bootconfig: Align the bootconfig applied initrd image size to 4
tools/bootconfig: Fix to check the write failure correctly
tools/bootconfig: Fix errno reference after printf()
|
|
Add a description about the endianness of the size and the checksum
fields. Those must be stored as le32 instead of u32. This will allow
us to apply bootconfig to the cross build initrd without caring
the endianness.
Link: https://lkml.kernel.org/r/160583936246.547349.10964204130590955409.stgit@devnote2
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes for CVE-2020-4788.
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1
cache before it has been completely validated, via a way-prediction
mechanism. It is not possible for an attacker to determine the
contents of impermissible memory using this method, since these
systems implement a combination of hardware and software security
measures to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker
induces the operating system to speculatively execute instructions
using data that the attacker controls. This can be used for example to
speculatively bypass "kernel user access prevention" techniques, as
discovered by Anthony Steinhauser of Google's Safeside Project. This
is not an attack by itself, but there is a possibility it could be
used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and
after the kernel performs any user accesses (patch 3). It also adds a
self-test and performs some related cleanups"
* tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
selftests/powerpc: refactor entry and rfi_flush tests
selftests/powerpc: entry flush test
powerpc: Only include kup-radix.h for 64-bit Book3S
powerpc/64s: flush L1D after user accesses
powerpc/64s: flush L1D on kernel entry
selftests/powerpc: rfi_flush: disable entry flush if present
|
|
To align the total file size, add padding null character when appending
the bootconfig to initrd image.
Link: https://lkml.kernel.org/r/160576522916.320071.4145530996151028855.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache after user accesses.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache on kernel entry.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the device links support in runtime PM, correct mistakes in
the cpuidle documentation, fix the handling of policy limits changes
in the schedutil cpufreq governor, fix assorted issues in the OPP
(operating performance points) framework and make one janitorial
change.
Specifics:
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy limits
updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal of
OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping driver
(Tom Rix)"
* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Resume the device earlier in __device_release_driver()
PM: runtime: Drop pm_runtime_clean_up_links()
PM: runtime: Drop runtime PM references to supplier on link removal
powercap/intel_rapl: remove unneeded semicolon
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
|
|
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
|
|
cpu/ is needed before cpu<N>/
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
cerainly -> certainly
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Now that ABI/testing documents were fixed, add --rst-sources to
the ABI/testing too.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9242473fd3df785565bb6084b1b814cc15074fb2.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With just a single fix, the contents there can be parsed properly
without the need to escape any ReST incompatible stuff.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/472f4574b6aa2ff4de5a819db1a4a5c9a34f5168.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
That helps to identify what ABI files are adding titles.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/e267b36ae7f32bab2a86f1da6b40bb3e62c877d4.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the stable ABI files are compatible with ReST,
parse them without converting complex descriptions as literal
blocks nor escaping special characters.
Please notice that escaping special characters will probably
be needed at descriptions, at least for the asterisk character.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/59ccbaa75ff05f23e701dd9a0bbe118e9343a553.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As we don't want a generic Sphinx extension to execute commands,
change the one proposed to Markus to call the abi_book.pl
script.
Use a script to parse the Documentation/ABI directory and output
it at the admin-guide.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5651482b06500e69a1acdf92152f90a203e6521d.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As reported by Sphinx 2.4.4:
docs/Documentation/admin-guide/LSM/SafeSetID.rst:110: WARNING: Title underline too short.
Note on GID policies and setgroups()
==================
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4afa281c170daabd1ce522653d5d5d5078ebd92c.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
There's a missing blank line after a literal block, which
causes this warning:
Documentation/admin-guide/sysctl/net.rst:303: WARNING: Literal block ends without a blank line; unexpected unindent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/b2545be4a4c71269d10278b5990c3e06c4b65f84.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- a series for the Xen pv block drivers adding module parameters for
better control of resource usge
- a cleanup series for the Xen event driver
* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Documentation: add xen.fifo_events kernel parameter description
xen/events: unmask a fifo event channel only if it was masked
xen/events: only register debug interrupt for 2-level events
xen/events: make struct irq_info private to events_base.c
xen: remove no longer used functions
xen-blkfront: Apply changed parameter name to the document
xen-blkfront: add a parameter for disabling of persistent grants
xen-blkback: add a parameter for disabling of persistent grants
|
|
Pull SafeSetID updates from Micah Morton:
"The changes are mostly contained to within the SafeSetID LSM, with the
exception of a few 1-line changes to change some ns_capable() calls to
ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that
is examined by SafeSetID code and nothing else in the kernel.
The changes to SafeSetID internally allow for setting up GID
transition security policies, as already existed for UIDs"
* tag 'safesetid-5.10' of git://github.com/micah-morton/linux:
LSM: SafeSetID: Fix warnings reported by test bot
LSM: SafeSetID: Add GID security policy handling
LSM: Signal to SafeSetID when setting group IDs
|
|
Pull documentation fixes from Jonathan Corbet:
"A handful of late-arriving documentation fixes"
* tag 'docs-5.10-2' of git://git.lwn.net/linux:
docs: Add two missing entries in vm sysctl index
docs/vm: trivial fixes to several spelling mistakes
docs: submitting-patches: describe preserving review/test tags
Documentation: Chinese translation of Documentation/arm64/hugetlbpage.rst
Documentation: x86: fix a missing word in x86_64/mm.rst.
docs: driver-api: remove a duplicated index entry
docs: lkdtm: Modernize and improve details
docs: deprecated.rst: Expand str*cpy() replacement notes
docs/cpu-load: format the example code.
|
|
The kernel boot parameter xen.fifo_events isn't listed in
Documentation/admin-guide/kernel-parameters.txt. Add it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20201022094907.28560-6-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Both seem overlooked while adding the section in the main content.
Signed-off-by: Fam Zheng <famzheng@amazon.com>
Link: https://lore.kernel.org/r/20201022065403.3936070-1-fam@euphon.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull nfsd updates from Bruce Fields:
"The one new feature this time, from Anna Schumaker, is READ_PLUS,
which has the same arguments as READ but allows the server to return
an array of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes"
* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
sunrpc: raise kernel RPC channel buffer size
svcrdma: fix bounce buffers for unaligned offsets and multiple pages
nfsd: remove unneeded break
net/sunrpc: Fix return value for sysctl sunrpc.transports
NFSD: Encode a full READ_PLUS reply
NFSD: Return both a hole and a data segment
NFSD: Add READ_PLUS hole segment encoding
NFSD: Add READ_PLUS data support
NFSD: Hoist status code encoding into XDR encoder functions
NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
NFSD: Remove the RETURN_STATUS() macro
NFSD: Call NFSv2 encoders on error returns
NFSD: Fix .pc_release method for NFSv2
NFSD: Remove vestigial typedefs
NFSD: Refactor nfsd_dispatch() error paths
NFSD: Clean up nfsd_dispatch() variables
NFSD: Clean up stale comments in nfsd_dispatch()
NFSD: Clean up switch statement in nfsd_dispatch()
...
|
|
format the example code.
Signed-off-by: Hui Su <sh_def@163.com>
Link: https://lore.kernel.org/r/20201018170557.GA7670@rlk
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- A single patch to fix the Xen security issue XSA-331 (malicious
guests can DoS dom0 by triggering NULL-pointer dereferences or access
to stale data).
- A larger series to fix the Xen security issue XSA-332 (malicious
guests can DoS dom0 by sending events at high frequency leading to
dom0's vcpus being busy in IRQ handling for elongated times).
* tag 'for-linus-5.10b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: block rogue events for some time
xen/events: defer eoi in case of excessive number of events
xen/events: use a common cpu hotplug hook for event channels
xen/events: switch user event channels to lateeoi model
xen/pciback: use lateeoi irq binding
xen/pvcallsback: use lateeoi irq binding
xen/scsiback: use lateeoi irq binding
xen/netback: use lateeoi irq binding
xen/blkback: use lateeoi irq binding
xen/events: add a new "late EOI" evtchn framework
xen/events: fix race in evtchn_fifo_unmask()
xen/events: add a proper barrier to 2-level uevent unmasking
xen/events: avoid removing an event channel while handling it
|
|
In case rogue guests are sending events at high frequency it might
happen that xen_evtchn_do_upcall() won't stop processing events in
dom0. As this is done in irq handling a crash might be the result.
In order to avoid that, delay further inter-domain events after some
time in xen_evtchn_do_upcall() by forcing eoi processing into a
worker on the same cpu, thus inhibiting new events coming in.
The time after which eoi processing is to be delayed is configurable
via a new module parameter "event_loop_timeout" which specifies the
maximum event loop time in jiffies (default: 2, the value was chosen
after some tests showing that a value of 2 was the lowest with an
only slight drop of dom0 network throughput while multiple guests
performed an event storm).
How long eoi processing will be delayed can be specified via another
parameter "event_eoi_delay" (again in jiffies, default 10, again the
value was chosen after testing with different delay values).
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
Pull more xfs updates from Darrick Wong:
"The second large pile of new stuff for 5.10, with changes even more
monumental than last week!
We are formally announcing the deprecation of the V4 filesystem format
in 2030. All users must upgrade to the V5 format, which contains
design improvements that greatly strengthen metadata validation,
supports reflink and online fsck, and is the intended vehicle for
handling timestamps past 2038. We're also deprecating the old Irix
behavioral tweaks in September 2025.
Coming along for the ride are two design changes to the deferred
metadata ops subsystem. One of the improvements is to retain correct
logical ordering of tasks and subtasks, which is a more logical design
for upper layers of XFS and will become necessary when we add atomic
file range swaps and commits. The second improvement to deferred ops
improves the scalability of the log by helping the log tail to move
forward during long-running operations. This reduces log contention
when there are a large number of threads trying to run transactions.
In addition to that, this fixes numerous small bugs in log recovery;
refactors logical intent log item recovery to remove the last
remaining place in XFS where we could have nested transactions; fixes
a couple of ways that intent log item recovery could fail in ways that
wouldn't have happened in the regular commit paths; fixes a deadlock
vector in the GETFSMAP implementation (which improves its performance
by 20%); and fixes serious bugs in the realtime growfs, fallocate, and
bitmap handling code.
Summary:
- Deprecate the V4 filesystem format, some disused mount options, and
some legacy sysctl knobs now that we can support dates into the
25th century. Note that removal of V4 support will not happen until
the early 2030s.
- Fix some probles with inode realtime flag propagation.
- Fix some buffer handling issues when growing a rt filesystem.
- Fix a problem where a BMAP_REMAP unmap call would free rt extents
even though the purpose of BMAP_REMAP is to avoid freeing the
blocks.
- Strengthen the dabtree online scrubber to check hash values on
child dabtree blocks.
- Actually log new intent items created as part of recovering log
intent items.
- Fix a bug where quotas weren't attached to an inode undergoing bmap
intent item recovery.
- Fix a buffer overrun problem with specially crafted log buffer
headers.
- Various cleanups to type usage and slightly inaccurate comments.
- More cleanups to the xattr, log, and quota code.
- Don't run the (slower) shared-rmap operations on attr fork
mappings.
- Fix a bug where we failed to check the LSN of finobt blocks during
replay and could therefore overwrite newer data with older data.
- Clean up the ugly nested transaction mess that log recovery uses to
stage intent item recovery in the correct order by creating a
proper data structure to capture recovered chains.
- Use the capture structure to resume intent item chains with the
same log space and block reservations as when they were captured.
- Fix a UAF bug in bmap intent item recovery where we failed to
maintain our reference to the incore inode if the bmap operation
needed to relog itself to continue.
- Rearrange the defer ops mechanism to finish newly created subtasks
of a parent task before moving on to the next parent task.
- Automatically relog intent items in deferred ops chains if doing so
would help us avoid pinning the log tail. This will help fix some
log scaling problems now and will facilitate atomic file updates
later.
- Fix a deadlock in the GETFSMAP implementation by using an internal
memory buffer to reduce indirect calls and copies to userspace,
thereby improving its performance by ~20%.
- Fix various problems when calling growfs on a realtime volume would
not fully update the filesystem metadata.
- Fix broken Kconfig asking about deprecated XFS when XFS is
disabled"
* tag 'xfs-5.10-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (48 commits)
xfs: fix Kconfig asking about XFS_SUPPORT_V4 when XFS_FS=n
xfs: fix high key handling in the rt allocator's query_range function
xfs: annotate grabbing the realtime bitmap/summary locks in growfs
xfs: make xfs_growfs_rt update secondary superblocks
xfs: fix realtime bitmap/summary file truncation when growing rt volume
xfs: fix the indent in xfs_trans_mod_dquot
xfs: do the ASSERT for the arguments O_{u,g,p}dqpp
xfs: fix deadlock and streamline xfs_getfsmap performance
xfs: limit entries returned when counting fsmap records
xfs: only relog deferred intent items if free space in the log gets low
xfs: expose the log push threshold
xfs: periodically relog deferred intent items
xfs: change the order in which child and parent defer ops are finished
xfs: fix an incore inode UAF in xfs_bui_recover
xfs: clean up xfs_bui_item_recover iget/trans_alloc/ilock ordering
xfs: clean up bmap intent item recovery checking
xfs: xfs_defer_capture should absorb remaining transaction reservation
xfs: xfs_defer_capture should absorb remaining block reservations
xfs: proper replay of deferred ops queued during log recovery
xfs: remove XFS_LI_RECOVERED
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
- Debugging for smp_call_function()
- RT raw/non-raw lock ordering fixes
- Strict grace periods for KASAN
- New smp_call_function() torture test
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
[ This doesn't actually pull the tag - I've dropped the last merge from
the RCU branch due to questions about the series. - Linus ]
* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
smp: Make symbol 'csd_bug_count' static
kernel/smp: Provide CSD lock timeout diagnostics
smp: Add source and destination CPUs to __call_single_data
rcu: Shrink each possible cpu krcp
rcu/segcblist: Prevent useless GP start if no CBs to accelerate
torture: Add gdb support
rcutorture: Allow pointer leaks to test diagnostic code
rcutorture: Hoist OOM registry up one level
refperf: Avoid null pointer dereference when buf fails to allocate
rcutorture: Properly synchronize with OOM notifier
rcutorture: Properly set rcu_fwds for OOM handling
torture: Add kvm.sh --help and update help message
rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
torture: Update initrd documentation
rcutorture: Replace HTTP links with HTTPS ones
locktorture: Make function torture_percpu_rwsem_init() static
torture: document --allcpus argument added to the kvm.sh script
rcutorture: Output number of elapsed grace periods
rcutorture: Remove KCSAN stubs
rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull documentation updates from Mauro Carvalho Chehab:
"A series of patches addressing warnings produced by make htmldocs.
This includes:
- kernel-doc markup fixes
- ReST fixes
- Updates at the build system in order to support newer versions of
the docs build toolchain (Sphinx)
After this series, the number of html build warnings should reduce
significantly, and building with Sphinx 3.1 or later should now be
supported (although it is still recommended to use Sphinx 2.4.4).
As agreed with Jon, I should be sending you a late pull request by the
end of the merge window addressing remaining issues with docs build,
as there are a number of warning fixes that depends on pull requests
that should be happening along the merge window.
The end goal is to have a clean htmldocs build on Kernel 5.10.
PS. It should be noticed that Sphinx 3.0 is not currently supported,
as it lacks support for C domain namespaces. Such feature, needed in
order to document uAPI system calls with Sphinx 3.x, was added only on
Sphinx 3.1"
* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
PM / devfreq: remove a duplicated kernel-doc markup
mm/doc: fix a literal block markup
workqueue: fix a kernel-doc warning
docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
Input: sparse-keymap: add a description for @sw
rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
nl80211: docs: add a description for s1g_cap parameter
usb: docs: document altmode register/unregister functions
kunit: test.h: fix a bad kernel-doc markup
drivers: core: fix kernel-doc markup for dev_err_probe()
docs: bio: fix a kerneldoc markup
kunit: test.h: solve kernel-doc warnings
block: bio: fix a warning at the kernel-doc markups
docs: powerpc: syscall64-abi.rst: fix a malformed table
drivers: net: hamradio: fix document location
net: appletalk: Kconfig: Fix docs location
dt-bindings: fix references to files converted to yaml
memblock: get rid of a :c:type leftover
math64.h: kernel-docs: Convert some markups into normal comments
media: uAPI: buffer.rst: remove a left-over documentation
...
|
|
Merge more updates from Andrew Morton:
"155 patches.
Subsystems affected by this patch series: mm (dax, debug, thp,
readahead, page-poison, util, memory-hotplug, zram, cleanups), misc,
core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch,
binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan,
romfs, and fault-injection"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
lib, uaccess: add failure injection to usercopy functions
lib, include/linux: add usercopy failure capability
ROMFS: support inode blocks calculation
ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang
sched.h: drop in_ubsan field when UBSAN is in trap mode
scripts/gdb/tasks: add headers and improve spacing format
scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command
kernel/relay.c: drop unneeded initialization
panic: dump registers on panic_on_warn
rapidio: fix the missed put_device() for rio_mport_add_riodev
rapidio: fix error handling path
nilfs2: fix some kernel-doc warnings for nilfs2
autofs: harden ioctl table
ramfs: fix nommu mmap with gaps in the page cache
mm: remove the now-unnecessary mmget_still_valid() hack
mm/gup: take mmap_lock in get_dump_page()
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot
coredump: rework elf/elf_fdpic vma_dump_size() into common helper
coredump: refactor page range dumping into common helper
coredump: let dump_emit() bail out on short writes
...
|
|
Patch series "add fault injection to user memory access", v3.
The goal of this series is to improve testing of fault-tolerance in usages
of user memory access functions, by adding support for fault injection.
syzkaller/syzbot are using the existing fault injection modes and will use
this particular feature also.
The first patch adds failure injection capability for usercopy functions.
The second changes usercopy functions to use this new failure capability
(copy_from_user, ...). The third patch adds get/put/clear_user failures
to x86.
This patch (of 3):
Add a failure injection capability to improve testing of fault-tolerance
in usages of user memory access functions.
Add CONFIG_FAULT_INJECTION_USERCOPY to enable faults in usercopy
functions. The should_fail_usercopy function is to be called by these
functions (copy_from_user, get_user, ...) in order to fail or not.
Signed-off-by: Albert van der Linde <alinde@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200831171733.955393-1-alinde@google.com
Link: http://lkml.kernel.org/r/20200831171733.955393-2-alinde@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
|
|
There is currently a problem with kernel-doc tags from blk.c:
.../Documentation/admin-guide/pstore-blk:239: ./fs/pstore/blk.c:175: WARNING: Duplicate C declaration, also defined in 'admin-guide/pstore-blk'.
Declaration is 'register_pstore_device'.
.../Documentation/admin-guide/pstore-blk:239: ./fs/pstore/blk.c:432: WARNING: Duplicate C declaration, also defined in 'admin-guide/pstore-blk'.
Declaration is 'register_pstore_blk'.
.../Documentation/admin-guide/pstore-blk:242: ./include/linux/pstore_blk.h:43: WARNING: Duplicate C declaration, also defined in 'admin-guide/pstore-blk'.
Declaration is 'pstore_device_info'.
Basically, the internal parts is shown with :export:, instead
of :internal:. Yet, there are some other exported docs that
aren't at the document, because they lack :identifiers:.
So, instead, let's just use :export: at the kAPI part of
the documentation.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There are three files with replace macros for structs,
mapping them into Sphinx 2.x C domain references.
Well, this is broken on Sphinx 3.x. Also, for Sphinx 2.x,
the automarkup macro should be able to take care of them.
So, let's just drop those.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.10-rc1.
Lots of little things in here, including:
- tasklet_setup api conversions
- sysrq support for capital letters
- vt and vc cleanups and unwinding the mess some more
- serial driver updates and minor tweaks
- new device ids
- rs485 support for some drivers
- serial binding documentation updates
- lots of small serial driver changes for reported issues
All have been in linux-next for a while with no reported issues"
* tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
serial: mcf: add sysrq capability
serial: fsl_lpuart: add sysrq support when using dma
fbcon: remove no-op fbcon_set_origin()
tty/sysrq: Extend the sysrq_key_table to cover capital letters
serial: max310x: rework RX interrupt handling
serial: 8250_dw: Fix clk-notifier/port suspend deadlock
serial: 8250: Skip uninitialized TTY port baud rate update
serial: 8250: Discard RTS/DTS setting from clock update method
tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
serial: 8250_fsl: Fix TX interrupt handling condition
serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt
tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
tty: serial: lpuart: fix lpuart32_write usage
serial: qcom_geni_serial: To correct QUP Version detection logic
serial: mvebu-uart: fix unused variable warning
vt_ioctl: make VT_RESIZEX behave like VT_RESIZE
serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
pch_uart: drop double zeroing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull PNP updates from Rafael Wysocki:
"These clean the PNP code somewhat:
- Remove the now unused pnp_find_card() function (Christoph Hellwig)
- Drop duplicate pci.h include from the quirks code and add an
"internal.h" include to acpi_pnp.c to fix a compiler warning (Tian
Tao)"
* tag 'pnp-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PNP: remove the now unused pnp_find_card() function
PNP: ACPI: Fix missing-prototypes in acpi_pnp.c
PNP: quirks: Fix duplicate included pci.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
|
|
Merge misc updates from Andrew Morton:
"181 patches.
Subsystems affected by this patch series: kbuild, scripts, ntfs,
ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise,
gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma,
memory-failure, vmallo and migration)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits)
mm/migrate: remove obsolete comment about device public
mm/migrate: remove cpages-- in migrate_vma_finalize()
mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
memblock: use separate iterators for memory and reserved regions
memblock: implement for_each_reserved_mem_region() using __next_mem_region()
memblock: remove unused memblock_mem_size()
x86/setup: simplify reserve_crashkernel()
x86/setup: simplify initrd relocation and reservation
arch, drivers: replace for_each_membock() with for_each_mem_range()
arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
memblock: reduce number of parameters in for_each_mem_range()
memblock: make memblock_debug and related functionality private
memblock: make for_each_memblock_type() iterator private
mircoblaze: drop unneeded NUMA and sparsemem initializations
riscv: drop unneeded node initialization
h8300, nds32, openrisc: simplify detection of memory extents
arm64: numa: simplify dummy_numa_init()
arm, xtensa: simplify initialization of high memory pages
dma-contiguous: simplify cma_early_percent_memory()
KVM: PPC: Book3S HV: simplify kvm_cma_reserve()
...
|
|
Change 'pecify' to 'Specify'.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.kernel.org/r/20200723032248.24772-4-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the cgroup v1, we have a numa_stat interface. This is useful for
providing visibility into the numa locality information within an memcg
since the pages are allowed to be allocated from any physical node. One
of the use cases is evaluating application performance by combining this
information with the application's CPU allocation. But the cgroup v2 does
not. So this patch adds the missing information.
Suggested-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/20200916100030.71698-2-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"The big new thing is the fully lockless ringbuffer implementation,
including the support for continuous lines. It will allow to store and
read messages in any situation wihtout the risk of deadlocks and
without the need of temporary per-CPU buffers.
The access is still serialized by logbuf_lock. It synchronizes few
more operations, for example, temporary buffer for formatting the
message, syslog and kmsg_dump operations. The lock removal is being
discussed and should be ready for the next release.
The continuous lines are handled exactly the same way as before to
avoid regressions in user space. It means that they are appended to
the last message when the caller is the same. Only the last message
can be extended.
The data ring includes plain text of the messages. Except for an
integer at the beginning of each message that points back to the
descriptor ring with other metadata.
The dictionary has to stay. journalctl uses it to filter the log. It
allows to show messages related to a given device. The dictionary
values are stored in the descriptor ring with the other metadata.
This is the first part of the printk rework as discussed at Plumbers
2019, see https://lore.kernel.org/r/87k1acz5rx.fsf@linutronix.de. The
next big step will be handling consoles by kthreads during the normal
system operation. It will require special handling of situations when
the kthreads could not get scheduled, for example, early boot,
suspend, panic.
Other changes:
- Add John Ogness as a reviewer for printk subsystem. He is author of
the rework and is familiar with the code and history.
- Fix locking in serial8250_do_startup() to prevent lockdep report.
- Few code cleanups"
* tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (27 commits)
printk: Use fallthrough pseudo-keyword
printk: reduce setup_text_buf size to LOG_LINE_MAX
printk: avoid and/or handle record truncation
printk: remove dict ring
printk: move dictionary keys to dev_printk_info
printk: move printk_info into separate array
printk: reimplement log_cont using record extension
printk: ringbuffer: add finalization/extension support
printk: ringbuffer: change representation of states
printk: ringbuffer: clear initial reserved fields
printk: ringbuffer: add BLK_DATALESS() macro
printk: ringbuffer: relocate get_data()
printk: ringbuffer: avoid memcpy() on state_var
printk: ringbuffer: fix setting state in desc_read()
kernel.h: Move oops_in_progress to printk.h
scripts/gdb: update for lockless printk ringbuffer
scripts/gdb: add utils.read_ulong()
docs: vmcoreinfo: add lockless printk ringbuffer vmcoreinfo
printk: reduce LOG_BUF_SHIFT range for H8300
printk: ringbuffer: support dataless records
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This time very little driver changes but lots of core changes.
We have some interesting cooperative work for ARM and Intel alike,
making the GPIO subsystem more and more suitable for industrial
systems and the like, in addition to the in-kernel users.
We touch driver core (device properties) and lib/* by adding one
simple string array free function, these are authored by Andy
Shevchenko who is a well known and recognized core helpers maintainers
so this should be fine.
We also see some Android GKI-related modularization in the MXC
drivers.
Core changes:
- The big core change is the updated (v2) userspace character device
API.
This corrects badly designed 64-bit alignment around the line
events. We also add the debounce request feature. This echoes the
often quotes passage from Frederick Brooks "The mythical man-month"
to always throw one away, which we have seen before in things such
as V4L2. So we put in a new one and deprecate and obsolete the old
one.
- All example tools in tools/gpio/* are migrated to the new API to
set a good example. The libgpiod userspace library has been
augmented to use this new API pretty much from day 1.
- Some misc API hardening by using strn* function calls has been
added as well.
- Use the simpler IDA interface for GPIO chip instance enumeration.
- Add device core function for counting string arrays in device
properties.
- Provide a generic library function kfree_strarray() that can be
used throughout the kernel.
Driver enhancements:
- The DesignWare dwapb-gpio driver has been enhanced and now uses the
IRQ handling in the gpiolib core.
- The mockup and aggregator drivers have seen some substantial code
clean-up and now use more of the core kernel inftrastructure.
- Misc cleanups using dev_err_probe().
- The MXC drivers (Freescale/NXP) can now be built modularized, which
makes modularized GKI Android kernels happy"
* tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits)
gpiolib: Update header block in gpiolib-cdev.h
gpiolib: cdev: switch from kstrdup() to kstrndup()
docs: gpio: add a new document to its index.rst
gpio: pca953x: Add support for the NXP PCAL9554B/C
tools: gpio: add debounce support to gpio-event-mon
tools: gpio: add multi-line monitoring to gpio-event-mon
tools: gpio: port gpio-event-mon to v2 uAPI
tools: gpio: port gpio-hammer to v2 uAPI
tools: gpio: rename nlines to num_lines
tools: gpio: port gpio-watch to v2 uAPI
tools: gpio: port lsgpio to v2 uAPI
gpio: uapi: document uAPI v1 as deprecated
gpiolib: cdev: support setting debounce
gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL
gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
gpiolib: cdev: support edge detection for uAPI v2
gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL
gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL
gpiolib: add build option for CDEV v1 ABI
gpiolib: make cdev a build option
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the usbvision driver was dropped from staging
- the Zoran driver were re-added at staging. It gained lots of
improvements, and was converted to use videobuf2 API
- a new virtual driver (vidtv) was added in order to allow testing the
digital TV framework and APIs
- the media uAPI documentation gained a glossary with commonly used
terms, helping to simplify some parts of the docs
- more cleanups at the atomisp driver
- Mediatek VPU gained support for MT8183
- added support for codecs with supports doing colorspace conversion
(CSC)
- support for CSC API was added at vivid and rksip1 drivers
- added a helper core support and uAPI for better supporting H.264
codecs
- added support for Renesas R8A774E1
- use the new SPDX GFDL-1.1-no-invariants-or-later license on media
uAPI docs, instead of a license text
- Venus driver has gained VP9 codec support
- lots of other cleanups and driver improvements
* tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (555 commits)
media: dvb-frontends/drxk_hard.c: fix uninitialized variable warning
media: tvp7002: fix uninitialized variable warning
media: s5k5baf: drop 'data' field in struct s5k5baf_fw
media: dt-bindings: media: venus: Add an optional power domain for perf voting
media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formats
media: staging: rkisp1: uapi: Do not use BIT() macro
media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_done
media: usbtv: Fix refcounting mixup
media: zoran.rst: place it at the right place this time
media: add Zoran cardlist
media: admin-guide: update cardlists
media: siano: rename a duplicated card string
media: zoran: move documentation file to the right place
media: atomisp: fixes build breakage for ISP2400 due to a cleanup
media: zoran: fix mixed case on vars
media: zoran: get rid of an unused var
media: zoran: use upper case for card types
media: zoran: fix sparse warnings
media: zoran: fix smatch warning
media: zoran: update TODO
...
|
|
The SafeSetID LSM has functionality for restricting setuid() calls based
on its configured security policies. This patch adds the analogous
functionality for setgid() calls. This is mostly a copy-and-paste change
with some code deduplication, plus slight modifications/name changes to
the policy-rule-related structs (now contain GID rules in addition to
the UID ones) and some type generalization since SafeSetID now needs to
deal with kgid_t and kuid_t types.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
|
|
* acpi-numa:
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
ACPI: Support Generic Initiator only domains
ACPI / NUMA: Add stub function for pxm_to_node()
irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory
ACPI: Remove side effect of partly creating a node in acpi_get_node()
ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node()
ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node()
ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT
ACPI: Add out of bounds and numa_off protections to pxm_to_node()
|
|
Pull documentation updates from Jonathan Corbet:
"As hoped, things calmed down for docs this cycle; fewer changes and
almost no conflicts at all. This includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc"
* tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits)
gpiolib: Update indentation in driver.rst for code excerpts
Documentation/admin-guide: tainted-kernels: Fix typo occured
Documentation: better locations for sysfs-pci, sysfs-tagging
docs: programming-languages: refresh blurb on clang support
Documentation: kvm: fix a typo
Documentation: Chinese translation of Documentation/arm64/amu.rst
doc: zh_CN: index files in arm64 subdirectory
mailmap: add entry for <mstarovoitov@marvell.com>
doc: seq_file: clarify role of *pos in ->next()
docs: trace: ring-buffer-design.rst: use the new SPDX tag
Documentation: kernel-parameters: clarify "module." parameters
Fix references to nommu-mmap.rst
docs: rewrite admin-guide/sysctl/abi.rst
docs: fb: Remove vesafb scrollback boot option
docs: fb: Remove sstfb scrollback boot option
docs: fb: Remove matroxfb scrollback boot option
docs: fb: Remove framebuffer scrollback boot option
docs: replace the old User Mode Linux HowTo with a new one
Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev"
Documentation/admin-guide: README & svga: remove use of "rdev"
...
|
|
Fix typo.
s/occured/occurred/
Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
Link: https://lore.kernel.org/r/20201012082441.5831-1-naoki.hayama@lineo.co.jp
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
Linus Torvalds
Masami Hiramatsu
Nicholas Piggin
Julia Lawall
Mauro Carvalho Chehab
Juergen Gross
Fam Zheng
Hui Su
Albert van der Linde
Baoquan He
Muchun Song
Thomas Cedeno
Rafael J. Wysocki
Naoki Hayama