summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2021-09-26Linux 5.4.149v5.4.149Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20210924124332.229289734@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210925120748.206179334@linuxfoundation.org Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26drm/nouveau/nvkm: Replace -ENOSYS with -ENODEVGuenter Roeck
commit e8f71f89236ef82d449991bfbc237e3cb6ea584f upstream. nvkm test builds fail with the following error. drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info': drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5' The code builds on most architectures, but fails on parisc where ENOSYS is defined as 251. Replace the error code with -ENODEV (-19). The actual error code does not really matter and is not passed to userspace - it just has to be negative. Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26rtc: rx8010: select REGMAP_I2CYu-Tung Chang
[ Upstream commit 0c45d3e24ef3d3d87c5e0077b8f38d1372af7176 ] The rtc-rx8010 uses the I2C regmap but doesn't select it in Kconfig so depending on the configuration the build may fail. Fix it. Signed-off-by: Yu-Tung Chang <mtwget@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210830052532.40356-1-mtwget@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()Li Jinlin
[ Upstream commit 884f0e84f1e3195b801319c8ec3d5774e9bf2710 ] The pending timer has been set up in blk_throtl_init(). However, the timer is not deleted in blk_throtl_exit(). This means that the timer handler may still be running after freeing the timer, which would result in a use-after-free. Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit(). Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: stm32-lp: Don't modify HW state in .remove() callbackUwe Kleine-König
[ Upstream commit d44084c93427bb0a9261432db1a8ca76a42d805e ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: rockchip: Don't modify HW state in .remove() callbackUwe Kleine-König
[ Upstream commit 9d768cd7fd42bb0be16f36aec48548fca5260759 ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: img: Don't modify HW state in .remove() callbackUwe Kleine-König
[ Upstream commit c68eb29c8e9067c08175dd0414f6984f236f719d ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_groupNanyong Sun
[ Upstream commit 17243e1c3072b8417a5ebfc53065d0a87af7ca77 ] kobject_put() should be used to cleanup the memory associated with the kobject instead of kobject_del(). See the section "Kobject removal" of "Documentation/core-api/kobject.rst". Link: https://lkml.kernel.org/r/20210629022556.3985106-7-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-7-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_groupNanyong Sun
[ Upstream commit b2fe39c248f3fa4bbb2a20759b4fdd83504190f7 ] If kobject_init_and_add returns with error, kobject_put() is needed here to avoid memory leak, because kobject_init_and_add may return error without freeing the memory associated with the kobject it allocated. Link: https://lkml.kernel.org/r/20210629022556.3985106-6-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-6-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_groupNanyong Sun
[ Upstream commit a3e181259ddd61fd378390977a1e4e2316853afa ] The kobject_put() should be used to cleanup the memory associated with the kobject instead of kobject_del. See the section "Kobject removal" of "Documentation/core-api/kobject.rst". Link: https://lkml.kernel.org/r/20210629022556.3985106-5-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-5-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix memory leak in nilfs_sysfs_create_##name##_groupNanyong Sun
[ Upstream commit 24f8cb1ed057c840728167dab33b32e44147c86f ] If kobject_init_and_add return with error, kobject_put() is needed here to avoid memory leak, because kobject_init_and_add may return error without freeing the memory associated with the kobject it allocated. Link: https://lkml.kernel.org/r/20210629022556.3985106-4-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-4-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix NULL pointer in nilfs_##name##_attr_releaseNanyong Sun
[ Upstream commit dbc6e7d44a514f231a64d9d5676e001b660b6448 ] In nilfs_##name##_attr_release, kobj->parent should not be referenced because it is a NULL pointer. The release() method of kobject is always called in kobject_put(kobj), in the implementation of kobject_put(), the kobj->parent will be assigned as NULL before call the release() method. So just use kobj to get the subgroups, which is more efficient and can fix a NULL pointer reference problem. Link: https://lkml.kernel.org/r/20210629022556.3985106-3-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-3-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix memory leak in nilfs_sysfs_create_device_groupNanyong Sun
[ Upstream commit 5f5dec07aca7067216ed4c1342e464e7307a9197 ] Patch series "nilfs2: fix incorrect usage of kobject". This patchset from Nanyong Sun fixes memory leak issues and a NULL pointer dereference issue caused by incorrect usage of kboject in nilfs2 sysfs implementation. This patch (of 6): Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888100ca8988 (size 8): comm "syz-executor.1", pid 1930, jiffies 4294745569 (age 18.052s) hex dump (first 8 bytes): 6c 6f 6f 70 31 00 ff ff loop1... backtrace: kstrdup+0x36/0x70 mm/util.c:60 kstrdup_const+0x35/0x60 mm/util.c:83 kvasprintf_const+0xf1/0x180 lib/kasprintf.c:48 kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289 kobject_add_varg lib/kobject.c:384 [inline] kobject_init_and_add+0xc9/0x150 lib/kobject.c:473 nilfs_sysfs_create_device_group+0x150/0x7d0 fs/nilfs2/sysfs.c:986 init_nilfs+0xa21/0xea0 fs/nilfs2/the_nilfs.c:637 nilfs_fill_super fs/nilfs2/super.c:1046 [inline] nilfs_mount+0x7b4/0xe80 fs/nilfs2/super.c:1316 legacy_get_tree+0x105/0x210 fs/fs_context.c:592 vfs_get_tree+0x8e/0x2d0 fs/super.c:1498 do_new_mount fs/namespace.c:2905 [inline] path_mount+0xf9b/0x1990 fs/namespace.c:3235 do_mount+0xea/0x100 fs/namespace.c:3248 __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount fs/namespace.c:3433 [inline] __x64_sys_mount+0x14b/0x1f0 fs/namespace.c:3433 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae If kobject_init_and_add return with error, then the cleanup of kobject is needed because memory may be allocated in kobject_init_and_add without freeing. And the place of cleanup_dev_kobject should use kobject_put to free the memory associated with the kobject. As the section "Kobject removal" of "Documentation/core-api/kobject.rst" says, kobject_del() just makes the kobject "invisible", but it is not cleaned up. And no more cleanup will do after cleanup_dev_kobject, so kobject_put is needed here. Link: https://lkml.kernel.org/r/1625651306-10829-1-git-send-email-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/1625651306-10829-2-git-send-email-konishi.ryusuke@gmail.com Reported-by: Hulk Robot <hulkci@huawei.com> Link: https://lkml.kernel.org/r/20210629022556.3985106-2-sunnanyong@huawei.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26btrfs: fix lockdep warning while mounting sprout fsAnand Jain
[ Upstream commit c124706900c20dee70f921bb3a90492431561a0a ] Following test case reproduces lockdep warning. Test case: $ mkfs.btrfs -f <dev1> $ btrfstune -S 1 <dev1> $ mount <dev1> <mnt> $ btrfs device add <dev2> <mnt> -f $ umount <mnt> $ mount <dev2> <mnt> $ umount <mnt> The warning claims a possible ABBA deadlock between the threads initiated by [#1] btrfs device add and [#0] the mount. [ 540.743122] WARNING: possible circular locking dependency detected [ 540.743129] 5.11.0-rc7+ #5 Not tainted [ 540.743135] ------------------------------------------------------ [ 540.743142] mount/2515 is trying to acquire lock: [ 540.743149] ffffa0c5544c2ce0 (&fs_devs->device_list_mutex){+.+.}-{4:4}, at: clone_fs_devices+0x6d/0x210 [btrfs] [ 540.743458] but task is already holding lock: [ 540.743461] ffffa0c54a7932b8 (btrfs-chunk-00){++++}-{4:4}, at: __btrfs_tree_read_lock+0x32/0x200 [btrfs] [ 540.743541] which lock already depends on the new lock. [ 540.743543] the existing dependency chain (in reverse order) is: [ 540.743546] -> #1 (btrfs-chunk-00){++++}-{4:4}: [ 540.743566] down_read_nested+0x48/0x2b0 [ 540.743585] __btrfs_tree_read_lock+0x32/0x200 [btrfs] [ 540.743650] btrfs_read_lock_root_node+0x70/0x200 [btrfs] [ 540.743733] btrfs_search_slot+0x6c6/0xe00 [btrfs] [ 540.743785] btrfs_update_device+0x83/0x260 [btrfs] [ 540.743849] btrfs_finish_chunk_alloc+0x13f/0x660 [btrfs] <--- device_list_mutex [ 540.743911] btrfs_create_pending_block_groups+0x18d/0x3f0 [btrfs] [ 540.743982] btrfs_commit_transaction+0x86/0x1260 [btrfs] [ 540.744037] btrfs_init_new_device+0x1600/0x1dd0 [btrfs] [ 540.744101] btrfs_ioctl+0x1c77/0x24c0 [btrfs] [ 540.744166] __x64_sys_ioctl+0xe4/0x140 [ 540.744170] do_syscall_64+0x4b/0x80 [ 540.744174] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 540.744180] -> #0 (&fs_devs->device_list_mutex){+.+.}-{4:4}: [ 540.744184] __lock_acquire+0x155f/0x2360 [ 540.744188] lock_acquire+0x10b/0x5c0 [ 540.744190] __mutex_lock+0xb1/0xf80 [ 540.744193] mutex_lock_nested+0x27/0x30 [ 540.744196] clone_fs_devices+0x6d/0x210 [btrfs] [ 540.744270] btrfs_read_chunk_tree+0x3c7/0xbb0 [btrfs] [ 540.744336] open_ctree+0xf6e/0x2074 [btrfs] [ 540.744406] btrfs_mount_root.cold.72+0x16/0x127 [btrfs] [ 540.744472] legacy_get_tree+0x38/0x90 [ 540.744475] vfs_get_tree+0x30/0x140 [ 540.744478] fc_mount+0x16/0x60 [ 540.744482] vfs_kern_mount+0x91/0x100 [ 540.744484] btrfs_mount+0x1e6/0x670 [btrfs] [ 540.744536] legacy_get_tree+0x38/0x90 [ 540.744537] vfs_get_tree+0x30/0x140 [ 540.744539] path_mount+0x8d8/0x1070 [ 540.744541] do_mount+0x8d/0xc0 [ 540.744543] __x64_sys_mount+0x125/0x160 [ 540.744545] do_syscall_64+0x4b/0x80 [ 540.744547] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 540.744551] other info that might help us debug this: [ 540.744552] Possible unsafe locking scenario: [ 540.744553] CPU0 CPU1 [ 540.744554] ---- ---- [ 540.744555] lock(btrfs-chunk-00); [ 540.744557] lock(&fs_devs->device_list_mutex); [ 540.744560] lock(btrfs-chunk-00); [ 540.744562] lock(&fs_devs->device_list_mutex); [ 540.744564] *** DEADLOCK *** [ 540.744565] 3 locks held by mount/2515: [ 540.744567] #0: ffffa0c56bf7a0e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.isra.16+0xdf/0x450 [ 540.744574] #1: ffffffffc05a9628 (uuid_mutex){+.+.}-{4:4}, at: btrfs_read_chunk_tree+0x63/0xbb0 [btrfs] [ 540.744640] #2: ffffa0c54a7932b8 (btrfs-chunk-00){++++}-{4:4}, at: __btrfs_tree_read_lock+0x32/0x200 [btrfs] [ 540.744708] stack backtrace: [ 540.744712] CPU: 2 PID: 2515 Comm: mount Not tainted 5.11.0-rc7+ #5 But the device_list_mutex in clone_fs_devices() is redundant, as explained below. Two threads [1] and [2] (below) could lead to clone_fs_device(). [1] open_ctree <== mount sprout fs btrfs_read_chunk_tree() mutex_lock(&uuid_mutex) <== global lock read_one_dev() open_seed_devices() clone_fs_devices() <== seed fs_devices mutex_lock(&orig->device_list_mutex) <== seed fs_devices [2] btrfs_init_new_device() <== sprouting mutex_lock(&uuid_mutex); <== global lock btrfs_prepare_sprout() lockdep_assert_held(&uuid_mutex) clone_fs_devices(seed_fs_device) <== seed fs_devices Both of these threads hold uuid_mutex which is sufficient to protect getting the seed device(s) freed while we are trying to clone it for sprouting [2] or mounting a sprout [1] (as above). A mounted seed device can not free/write/replace because it is read-only. An unmounted seed device can be freed by btrfs_free_stale_devices(), but it needs uuid_mutex. So this patch removes the unnecessary device_list_mutex in clone_fs_devices(). And adds a lockdep_assert_held(&uuid_mutex) in clone_fs_devices(). Reported-by: Su Yue <l@damenly.su> Tested-by: Su Yue <l@damenly.su> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26ceph: lockdep annotations for try_nonblocking_invalidateJeff Layton
[ Upstream commit 3eaf5aa1cfa8c97c72f5824e2e9263d6cc977b03 ] Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26ceph: request Fw caps before updating the mtime in ceph_write_iterJeff Layton
[ Upstream commit b11ed50346683a749632ea664959b28d524d7395 ] The current code will update the mtime and then try to get caps to handle the write. If we end up having to request caps from the MDS, then the mtime in the cap grant will clobber the updated mtime and it'll be lost. This is most noticable when two clients are alternately writing to the same file. Fw caps are continually being granted and revoked, and the mtime ends up stuck because the updated mtimes are always being overwritten with the old one. Fix this by changing the order of operations in ceph_write_iter to get the caps before updating the times. Also, make sure we check the pool full conditions before even getting any caps or uninlining. URL: https://tracker.ceph.com/issues/46574 Reported-by: Jozef Kováč <kovac@firma.zoznam.sk> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: xilinx_dma: Set DMA mask for coherent APIsRadhey Shyam Pandey
[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ] The xilinx dma driver uses the consistent allocations, so for correct operation also set the DMA mask for coherent APIs. It fixes the below kernel crash with dmatest client when DMA IP is configured with 64-bit address width and linux is booted from high (>4GB) memory. Call trace: [ 489.531257] dma_alloc_from_pool+0x8c/0x1c0 [ 489.535431] dma_direct_alloc+0x284/0x330 [ 489.539432] dma_alloc_attrs+0x80/0xf0 [ 489.543174] dma_pool_alloc+0x160/0x2c0 [ 489.547003] xilinx_cdma_prep_memcpy+0xa4/0x180 [ 489.551524] dmatest_func+0x3cc/0x114c [ 489.555266] kthread+0x124/0x130 [ 489.558486] ret_from_fork+0x10/0x3c [ 489.562051] ---[ end trace 248625b2d596a90a ]--- Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Harini Katakam <harini.katakam@xilinx.com> Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: ioat: depends on !UMLJohannes Berg
[ Upstream commit bbac7a92a46f0876e588722ebe552ddfe6fd790f ] Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: sprd: Add missing MODULE_DEVICE_TABLEZou Wei
[ Upstream commit 4faee8b65ec32346f8096e64c5fa1d5a73121742 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/1620094977-70146-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26parisc: Move pci_dev_is_behind_card_dino to where it is usedGuenter Roeck
[ Upstream commit 907872baa9f1538eed02ec737b8e89eba6c6e4b9 ] parisc build test images fail to compile with the following error. drivers/parisc/dino.c:160:12: error: 'pci_dev_is_behind_card_dino' defined but not used Move the function just ahead of its only caller to avoid the error. Fixes: 5fa1659105fa ("parisc: Disable HP HSC-PCI Cards to prevent kernel crash") Cc: Helge Deller <deller@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()Thomas Gleixner
[ Upstream commit 4b92d4add5f6dcf21275185c997d6ecb800054cd ] DEFINE_SMP_CALL_CACHE_FUNCTION() was usefel before the CPU hotplug rework to ensure that the cache related functions are called on the upcoming CPU because the notifier itself could run on any online CPU. The hotplug state machine guarantees that the callbacks are invoked on the upcoming CPU. So there is no need to have this SMP function call obfuscation. That indirection was missed when the hotplug notifiers were converted. This also solves the problem of ARM64 init_cache_level() invoking ACPI functions which take a semaphore in that context. That's invalid as SMP function calls run with interrupts disabled. Running it just from the callback in context of the CPU hotplug thread solves this. Fixes: 8571890e1513 ("arm64: Add support for ACPI based firmware tables") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/871r69ersb.ffs@tglx Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26thermal/core: Fix thermal_cooling_device_register() prototypeArnd Bergmann
[ Upstream commit fb83610762dd5927212aa62a468dd3b756b57a88 ] There are two pairs of declarations for thermal_cooling_device_register() and thermal_of_cooling_device_register(), and only one set was changed in a recent patch, so the other one now causes a compile-time warning: drivers/net/wireless/mediatek/mt76/mt7915/init.c: In function 'mt7915_thermal_init': drivers/net/wireless/mediatek/mt76/mt7915/init.c:134:48: error: passing argument 1 of 'thermal_cooling_device_register' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] 134 | cdev = thermal_cooling_device_register(wiphy_name(wiphy), phy, | ^~~~~~~~~~~~~~~~~ In file included from drivers/net/wireless/mediatek/mt76/mt7915/init.c:7: include/linux/thermal.h:407:39: note: expected 'char *' but argument is of type 'const char *' 407 | thermal_cooling_device_register(char *type, void *devdata, | ~~~~~~^~~~ Change the dummy helper functions to have the same arguments as the normal version. Fixes: f991de53a8ab ("thermal: make device_register's type argument const") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210722090717.1116748-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCHLukas Bulwahn
[ Upstream commit 6fe26259b4884b657cbc233fb9cdade9d704976e ] Commit 05a4a9527931 ("kernel/watchdog: split up config options") adds a new config HARDLOCKUP_DETECTOR, which selects the non-existing config HARDLOCKUP_DETECTOR_ARCH. Hence, ./scripts/checkkconfigsymbols.py warns: HARDLOCKUP_DETECTOR_ARCH Referencing files: lib/Kconfig.debug Simply drop selecting the non-existing HARDLOCKUP_DETECTOR_ARCH. Link: https://lkml.kernel.org/r/20210806115618.22088-1-lukas.bulwahn@gmail.com Fixes: 05a4a9527931 ("kernel/watchdog: split up config options") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Babu Moger <babu.moger@oracle.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26net: stmmac: reset Tx desc base address before restarting TxJongsung Kim
commit f421031e3ff0dd288a6e1bbde9aa41a25bb814e6 upstream. Refer to the databook of DesignWare Cores Ethernet MAC Universal: 6.2.1.5 Register 4 (Transmit Descriptor List Address Register If this register is not changed when the ST bit is set to 0, then the DMA takes the descriptor address where it was stopped earlier. The stmmac_tx_err() does zero indices to Tx descriptors, but does not reset HW current Tx descriptor address. To fix inconsistency, the base address of the Tx descriptors should be rewritten before restarting Tx. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26phy: avoid unnecessary link-up delay in polling modePetr Oros
commit e96bd2d3b1f83170d1d5c1a99e439b39a22a5b58 upstream. commit 93c0970493c71f ("net: phy: consider latched link-down status in polling mode") removed double-read of latched link-state register for polling mode from genphy_update_link(). This added extra ~1s delay into sequence link down->up. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up. In phy_state_machine is checked link state but it is latched "link is down". The state machine is scheduled after one second and there is detected "link is up". This extra delay can be avoided when we keep link-state register double read in case when link was down previously. With this solution we don't miss a link-down event in polling mode and link-up is faster. Details about this quirky behavior on Realtek phy: Without patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), here i read link-down (BMSR_LSTATUS==0), T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), up-to-date link-up is read (BMSR_LSTATUS==1), phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING With patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0, second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1, phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was ↵Uwe Kleine-König
registered commit 3d2813fb17e5fd0d73c1d1442ca0192bde4af10e upstream. This fixes a race condition: After pwmchip_add() is called there might already be a consumer and then modifying the hardware behind the consumer's back is bad. So set the default before. (Side-note: I don't know what this register setting actually does, if this modifies the polarity there is an inconsistency because the inversed polarity isn't considered if the PWM is already running during .probe().) Fixes: acfd92fdfb93 ("pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value") Cc: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26profiling: fix shift-out-of-bounds bugsPavel Skripkin
commit 2d186afd04d669fe9c48b994c41a7405a3c9f16d upstream. Syzbot reported shift-out-of-bounds bug in profile_init(). The problem was in incorrect prof_shift. Since prof_shift value comes from userspace we need to clamp this value into [0, BITS_PER_LONG -1] boundaries. Second possible shiht-out-of-bounds was found by Tetsuo: sample_step local variable in read_profile() had "unsigned int" type, but prof_shift allows to make a BITS_PER_LONG shift. So, to prevent possible shiht-out-of-bounds sample_step type was changed to "unsigned long". Also, "unsigned short int" will be sufficient for storing [0, BITS_PER_LONG] value, that's why there is no need for "unsigned long" prof_shift. Link: https://lkml.kernel.org/r/20210813140022.5011-1-paskripkin@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+e68c89a9510c159d9684@syzkaller.appspotmail.com Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26nilfs2: use refcount_dec_and_lock() to fix potential UAFZhen Lei
commit 98e2e409e76ef7781d8511f997359e9c504a95c1 upstream. When the refcount is decreased to 0, the resource reclamation branch is entered. Before CPU0 reaches the race point (1), CPU1 may obtain the spinlock and traverse the rbtree to find 'root', see nilfs_lookup_root(). Although CPU1 will call refcount_inc() to increase the refcount, it is obviously too late. CPU0 will release 'root' directly, CPU1 then accesses 'root' and triggers UAF. Use refcount_dec_and_lock() to ensure that both the operations of decrease refcount to 0 and link deletion are lock protected eliminates this risk. CPU0 CPU1 nilfs_put_root(): <-------- (1) spin_lock(&nilfs->ns_cptree_lock); rb_erase(&root->rb_node, &nilfs->ns_cptree); spin_unlock(&nilfs->ns_cptree_lock); kfree(root); <-------- use-after-free refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 9476 at lib/refcount.c:28 \ refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28 Modules linked in: CPU: 2 PID: 9476 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... RIP: 0010:refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28 ... ... Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] nilfs_put_root+0xc1/0xd0 fs/nilfs2/the_nilfs.c:795 nilfs_segctor_destroy fs/nilfs2/segment.c:2749 [inline] nilfs_detach_log_writer+0x3fa/0x570 fs/nilfs2/segment.c:2812 nilfs_put_super+0x2f/0xf0 fs/nilfs2/super.c:467 generic_shutdown_super+0xcd/0x1f0 fs/super.c:464 kill_block_super+0x4a/0x90 fs/super.c:1446 deactivate_locked_super+0x6a/0xb0 fs/super.c:335 deactivate_super+0x85/0x90 fs/super.c:366 cleanup_mnt+0x277/0x2e0 fs/namespace.c:1118 __cleanup_mnt+0x15/0x20 fs/namespace.c:1125 task_work_run+0x8e/0x110 kernel/task_work.c:151 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:164 [inline] exit_to_user_mode_prepare+0x13c/0x170 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x16/0x30 kernel/entry/common.c:266 do_syscall_64+0x45/0x80 arch/x86/entry/common.c:56 entry_SYSCALL_64_after_hwframe+0x44/0xa9 There is no reproduction program, and the above is only theoretical analysis. Link: https://lkml.kernel.org/r/1629859428-5906-1-git-send-email-konishi.ryusuke@gmail.com Fixes: ba65ae4729bf ("nilfs2: add checkpoint tree to nilfs object") Link: https://lkml.kernel.org/r/20210723012317.4146-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26prctl: allow to setup brk for et_dyn executablesCyrill Gorcunov
commit e1fbbd073137a9d63279f6bf363151a938347640 upstream. Keno Fischer reported that when a binray loaded via ld-linux-x the prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays before mm:end_data. For example a test program shows | # ~/t | | start_code 401000 | end_code 401a15 | start_stack 7ffce4577dd0 | start_data 403e10 | end_data 40408c | start_brk b5b000 | sbrk(0) b5b000 and when executed via ld-linux | # /lib64/ld-linux-x86-64.so.2 ~/t | | start_code 7fc25b0a4000 | end_code 7fc25b0c4524 | start_stack 7fffcc6b2400 | start_data 7fc25b0ce4c0 | end_data 7fc25b0cff98 | start_brk 55555710c000 | sbrk(0) 55555710c000 This of course prevent criu from restoring such programs. Looking into how kernel operates with brk/start_brk inside brk() syscall I don't see any problem if we allow to setup brk/start_brk without checking for end_data. Even if someone pass some weird address here on a purpose then the worst possible result will be an unexpected unmapping of existing vma (own vma, since prctl works with the callers memory) but test for RLIMIT_DATA is still valid and a user won't be able to gain more memory in case of expanding VMAs via new values shipped with prctl call. Link: https://lkml.kernel.org/r/20210121221207.GB2174@grain Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec") Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Reported-by: Keno Fischer <keno@juliacomputing.com> Acked-by: Andrey Vagin <avagin@gmail.com> Tested-by: Andrey Vagin <avagin@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-269p/trans_virtio: Remove sysfs file on probe failureXie Yongji
commit f997ea3b7afc108eb9761f321b57de2d089c7c48 upstream. This ensures we don't leak the sysfs file if we failed to allocate chan->vc_wq during probe. Link: http://lkml.kernel.org/r/20210517083557.172-1-xieyongji@bytedance.com Fixes: 86c8437383ac ("net/9p: Add sysfs mount_tag file for virtio 9P device") Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()Dan Carpenter
commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream. This error path return success but it should propagate the negative error code from devm_clk_get(). Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210810084413.GA23810@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26dmaengine: acpi: Avoid comparison GSI with Linux vIRQAndy Shevchenko
commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream. Currently the CRST parsing relies on the fact that on most of x86 devices the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for some. Fix this by converting GSI to Linux vIRQ before checking it. Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26um: virtio_uml: fix memory leak on init failuresJohannes Berg
commit 7ad28e0df7ee9dbcb793bb88dd81d4d22bb9a10e upstream. If initialization fails, e.g. because the connection failed, we leak the 'vu_dev'. Fix that. Reported by smatch. Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26staging: rtl8192u: Fix bitwise vs logical operator in ↵Nathan Chancellor
TranslateRxSignalStuff819xUsb() commit 099ec97ac92911abfb102bb5c68ed270fc12e0dd upstream. clang warns: drivers/staging/rtl8192u/r8192U_core.c:4268:20: warning: bitwise and of boolean expressions; did you mean logical and? [-Wbool-operation-and] bpacket_toself = bpacket_match_bssid & ^~~~~~~~~~~~~~~~~~~~~ && 1 warning generated. Replace the bitwise AND with a logical one to clear up the warning, as that is clearly what was intended. Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20210814235625.1780033-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26sctp: add param size validation for SCTP_PARAM_SET_PRIMARYMarcelo Ricardo Leitner
commit ef6c8d6ccf0c1dccdda092ebe8782777cd7803c9 upstream. When SCTP handles an INIT chunk, it calls for example: sctp_sf_do_5_1B_init sctp_verify_init sctp_verify_param sctp_process_init sctp_process_param handling of SCTP_PARAM_SET_PRIMARY sctp_verify_init() wasn't doing proper size validation and neither the later handling, allowing it to work over the chunk itself, possibly being uninitialized memory. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26sctp: validate chunk size in __rcv_asconf_lookupMarcelo Ricardo Leitner
commit b6ffe7671b24689c09faa5675dd58f93758a97ae upstream. In one of the fallbacks that SCTP has for identifying an association for an incoming packet, it looks for AddIp chunk (from ASCONF) and take a peek. Thing is, at this stage nothing was validating that the chunk actually had enough content for that, allowing the peek to happen over uninitialized memory. Similar check already exists in actual asconf handling in sctp_verify_asconf(). Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACEAlex Sverdlin
commit 6fa630bf473827aee48cbf0efbbdf6f03134e890 upstream FTRACE_ADDR is only defined when CONFIG_DYNAMIC_FTRACE is defined, the latter is even stronger requirement than CONFIG_FUNCTION_TRACER (which is enough for MCOUNT_ADDR). Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/ZUVCQBHDMFVR7CCB7JPESLJEWERZDJ3T/ Fixes: 1f12fb25c5c5d22f ("ARM: 9079/1: ftrace: Add MODULE_PLTS support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26ARM: 9079/1: ftrace: Add MODULE_PLTS supportAlex Sverdlin
commit 79f32b221b18c15a98507b101ef4beb52444cc6f upstream Teach ftrace_make_call() and ftrace_make_nop() about PLTs. Teach PLT code about FTRACE and all its callbacks. Otherwise the following might happen: ------------[ cut here ]------------ WARNING: CPU: 14 PID: 2265 at .../arch/arm/kernel/insn.c:14 __arm_gen_branch+0x83/0x8c() ... Hardware name: LSI Axxia AXM55XX [<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14) [<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8) [<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90) [<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c) [<c03218f3>] (warn_slowpath_null) from [<c03143cf>] (__arm_gen_branch+0x83/0x8c) [<c03143cf>] (__arm_gen_branch) from [<c0314337>] (ftrace_make_nop+0xf/0x24) [<c0314337>] (ftrace_make_nop) from [<c038ebcb>] (ftrace_process_locs+0x27b/0x3e8) [<c038ebcb>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44) [<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84) [<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18) ---[ end trace e1b64ced7a89adcc ]--- ------------[ cut here ]------------ WARNING: CPU: 14 PID: 2265 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1b1/0x234() ... Hardware name: LSI Axxia AXM55XX [<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14) [<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8) [<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90) [<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c) [<c03218f3>] (warn_slowpath_null) from [<c038e87d>] (ftrace_bug+0x1b1/0x234) [<c038e87d>] (ftrace_bug) from [<c038ebd5>] (ftrace_process_locs+0x285/0x3e8) [<c038ebd5>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44) [<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84) [<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18) ---[ end trace e1b64ced7a89adcd ]--- ftrace failed to modify [<e9ef7006>] 0xe9ef7006 actual: 02:f0:3b:fa ftrace record flags: 0 (0) expected tramp: c0314265 Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()Alex Sverdlin
commit 890cb057a46d323fd8c77ebecb6485476614cd21 upstream Will be used in the following patch. No functional change. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26ARM: 9077/1: PLT: Move struct plt_entries definition to headerAlex Sverdlin
commit 4e271701c17dee70c6e1351c4d7d42e70405c6a9 upstream No functional change, later it will be re-used in several files. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26apparmor: remove duplicate macro list_entry_is_head()Andy Shevchenko
commit 9801ca279ad37f72f71234fa81722afd95a3f997 upstream. Strangely I hadn't had noticed the existence of the list_entry_is_head() in apparmor code when added the same one in the list.h. Luckily it's fully identical and didn't break builds. In any case we don't need a duplicate anymore, thus remove it from apparmor code. Link: https://lkml.kernel.org/r/20201208100639.88182-1-andriy.shevchenko@linux.intel.com Fixes: e130816164e244 ("include/linux/list.h: add a macro to test if entry is pointing to the head") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: John Johansen <john.johansen@canonical.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E . Hallyn " <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26ARM: Qualify enabling of swiotlb_init()Florian Fainelli
commit fcf044891c84e38fc90eb736b818781bccf94e38 upstream. We do not need a SWIOTLB unless we have DRAM that is addressable beyond the arm_dma_limit. Compare max_pfn with arm_dma_pfn_limit to determine whether we do need a SWIOTLB to be initialized. Fixes: ad3c7b18c5b3 ("arm: use swiotlb for bounce buffering on LPAE configs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26s390/pci_mmio: fully validate the VMA before calling follow_pte()David Hildenbrand
commit a8b92b8c1eac8d655a97b1e90f4d83c25d9b9a18 upstream. We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"). find_vma() does not check if the address is >= the VMA start address; use vma_lookup() instead. Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26console: consume APC, DM, DCSnick black
commit 3a2b2eb55681158d3e3ef464fbf47574cf0c517c upstream. The Linux console's VT102 implementation already consumes OSC ("Operating System Command") sequences, probably because that's how palette changes are transmitted. In addition to OSC, there are three other major clases of ANSI control strings: APC ("Application Program Command"), PM ("Privacy Message"), and DCS ("Device Control String"). They are handled similarly to OSC in terms of termination. Source: vt100.net Add three new enumerated states, one for each of these types. All three are handled the same way right now--they simply consume input until terminated. I hope to expand upon this firmament in the future. Add new predicate ansi_control_string(), returning true for any of these states. Replace explicit checks against ESosc with calls to this function. Transition to these states appropriately from the escape initiation (ESesc) state. This was motivated by the following Notcurses bugs: https://github.com/dankamongmen/notcurses/issues/2050 https://github.com/dankamongmen/notcurses/issues/1828 https://github.com/dankamongmen/notcurses/issues/2069 where standard VT sequences are not consumed by the Linux console. It's not necessary that the Linux console *support* these sequences, but it ought *consume* these well-specified classes of sequences. Tested by sending a variety of escape sequences to the console, and verifying that they still worked, or were now properly consumed. Verified that the escapes were properly terminated at a generic level. Verified that the Notcurses tools continued to show expected output on the Linux console, except now without escape bleedthrough. Link: https://lore.kernel.org/lkml/YSydL0q8iaUfkphg@schwarzgerat.orthanc/ Signed-off-by: nick black <dankamongmen@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26KVM: remember position in kvm->vcpus arrayRadim Krčmář
commit 8750e72a79dda2f665ce17b62049f4d62130d991 upstream. Fetching an index for any vcpu in kvm->vcpus array by traversing the entire array everytime is costly. This patch remembers the position of each vcpu in kvm->vcpus array by storing it in vcpus_idx under kvm_vcpu structure. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [borntraeger@de.ibm.com]: backport to 4.19 (also fits for 5.4) Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26PCI/ACPI: Add Ampere Altra SOC MCFG quirkTuan Phan
commit 877c1a5f79c6984bbe3f2924234c08e2f4f1acd5 upstream. Ampere Altra SOC supports only 32-bit ECAM reads. Add an MCFG quirk for the platform. Link: https://lore.kernel.org/r/1596751055-12316-1-git-send-email-tuanphan@os.amperecomputing.com Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> [ dannf: backport drops const qualifier from pci_32b_read_ops for consistency with the other quirks that weren't yet constified in v5.4 ] Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26PCI: aardvark: Fix reporting CRS valuePali Rohár
commit 43f5c77bcbd27cce70bf33c2b86d6726ce95dd66 upstream. Set CRSVIS flag in emulated root PCI bridge to indicate support for Completion Retry Status. Add check for CRSSVE flag from root PCI brige when issuing Configuration Read Request via PIO to correctly returns fabricated CRS value as it is required by PCIe spec. Link: https://lore.kernel.org/r/20210722144041.12661-5-pali@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # e0d9d30b7354 ("PCI: pci-bridge-emul: Fix big-endian support") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26PCI: pci-bridge-emul: Add PCIe Root Capabilities RegisterPali Rohár
commit e902bb7c24a7099d0eb0eb4cba06f2d91e9299f3 upstream. The 16-bit Root Capabilities register is at offset 0x1e in the PCIe Capability. Rename current 'rsvd' struct member to 'rootcap'. Link: https://lore.kernel.org/r/20210722144041.12661-4-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26PCI: aardvark: Indicate error in 'val' when config read failsPali Rohár
commit b1bd5714472cc72e14409f5659b154c765a76c65 upstream. Most callers of config read do not check for return value. But most of the ones that do, checks for error indication in 'val' variable. This patch updates error handling in advk_pcie_rd_conf() function. If PIO transfer fails then 'val' variable is set to 0xffffffff which indicates failture. Link: https://lore.kernel.org/r/20200528162604.GA323482@bjorn-Precision-5520 Link: https://lore.kernel.org/r/20200601130315.18895-1-pali@kernel.org Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26PCI: pci-bridge-emul: Fix big-endian supportGrzegorz Jaszczyk
commit e0d9d30b73548fbfe5c024ed630169bdc9a08aee upstream. Perform conversion to little-endian before every write to configuration space and convert it back to CPU endianness on reads. Additionally, initialise every multiple byte field of config space with the cpu_to_le* macro, which is required since the structure describing config space of emulated bridge assumes little-endian convention. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-27 14:09:13 +0000