| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c54d481d71c6849e044690d3960aaebc730224cc upstream.
In the implementation of aa_audit_rule_init(), when aa_label_parse()
fails the allocated memory for rule is released using
aa_audit_rule_free(). But after this release, the return statement
tries to access the label field of the rule which results in
use-after-free. Before releasing the rule, copy errNo and return it
after release.
Fixes: 52e8c38001d8 ("apparmor: Fix memory leak of rule on error exit path")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 6129ed877d409037b79866327102c9dc59a302fe upstream.
Set the mmio_value to '0' instead of simply clearing the present bit to
squash a benign warning in kvm_mmu_set_mmio_spte_mask() that complains
about the mmio_value overlapping the lower GFN mask on systems with 52
bits of PA space.
Opportunistically clean up the code and comments.
Cc: stable@vger.kernel.org
Fixes: d43e2675e96fc ("KVM: x86: only do L1TF workaround on affected processors")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200527084909.23492-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit df7e0681dd8acfa8d07816eaef232ded816d8a8c upstream.
vmx_load_mmu_pgd is delaying the write of GUEST_CR3 to prepare_vmcs02 as
an optimization, but this is only correct before the nested vmentry.
If userspace is modifying CR3 with KVM_SET_SREGS after the VM has
already been put in guest mode, the value of CR3 will not be updated.
Remove the optimization, which almost never triggers anyway.
Fixes: 04f11ef45810 ("KVM: nVMX: Always write vmcs02.GUEST_CR3 during nested VM-Enter")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 79a1f0ccdbb4ad700590f61b00525b390cb53905 upstream.
Socket option IPV6_ADDRFORM supports UDP/UDPLITE and TCP at present.
Previously the checking logic looks like:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
do_some_check;
else if (sk->sk_protocol != IPPROTO_TCP)
break;
After commit b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation"), TCP
was blocked as the logic changed to:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
do_some_check;
else if (sk->sk_protocol == IPPROTO_TCP)
do_some_check;
break;
else
break;
Then after commit 82c9ae440857 ("ipv6: fix restrict IPV6_ADDRFORM operation")
UDP/UDPLITE were blocked as the logic changed to:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
do_some_check;
if (sk->sk_protocol == IPPROTO_TCP)
do_some_check;
if (sk->sk_protocol != IPPROTO_TCP)
break;
Fix it by using Eric's code and simply remove the break in TCP check, which
looks like:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
do_some_check;
else if (sk->sk_protocol == IPPROTO_TCP)
do_some_check;
else
break;
Fixes: 82c9ae440857 ("ipv6: fix restrict IPV6_ADDRFORM operation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 9453264ef58638ce8976121ac44c07a3ef375983 upstream.
go7007_snd_init() misses a snd_card_free() in an error path.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 187b96db5ca79423618dfa29a05c438c34f9e1f0 upstream.
Normally, show_trace_log_lvl() scans the stack, looking for text
addresses to print. In parallel, it unwinds the stack with
unwind_next_frame(). If the stack address matches the pointer returned
by unwind_get_return_address_ptr() for the current frame, the text
address is printed normally without a question mark. Otherwise it's
considered a breadcrumb (potentially from a previous call path) and it's
printed with a question mark to indicate that the address is unreliable
and typically can be ignored.
Since the following commit:
f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
... for inactive tasks, show_trace_log_lvl() prints *only* unreliable
addresses (prepended with '?').
That happens because, for the first frame of an inactive task,
unwind_get_return_address_ptr() returns the wrong return address
pointer: one word *below* the task stack pointer. show_trace_log_lvl()
starts scanning at the stack pointer itself, so it never finds the first
'reliable' address, causing only guesses to being printed.
The first frame of an inactive task isn't a normal stack frame. It's
actually just an instance of 'struct inactive_task_frame' which is left
behind by __switch_to_asm(). Now that this inactive frame is actually
exposed to callers, fix unwind_get_return_address_ptr() to interpret it
properly.
Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200522135435.vbxs7umku5pyrdbk@treble
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 71c95825289f585014fe9741b051d32a7a916680 upstream.
The unwind_state 'error' field is used to inform the reliable unwinding
code that the stack trace can't be trusted. Set this field for all
errors in __unwind_start().
Also, move the zeroing out of the unwind_state struct to before the ORC
table initialization check, to prevent the caller from reading
uninitialized data if the ORC table is corrupted.
Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces")
Fixes: d3a09104018c ("x86/unwinder/orc: Dont bail on stack overflow")
Fixes: 98d0c8ebf77e ("x86/unwind/orc: Prevent unwinding before ORC initialization")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 9210c075cef29c1f764b4252f93105103bdfb292 upstream.
There may be a race between nvme_reap_pending_cqes() and nvme_poll(), e.g.,
when doing live reset while polling the nvme device.
CPU X CPU Y
nvme_poll()
nvme_dev_disable()
-> nvme_stop_queues()
-> nvme_suspend_io_queues()
-> nvme_suspend_queue()
-> spin_lock(&nvmeq->cq_poll_lock);
-> nvme_reap_pending_cqes()
-> nvme_process_cq() -> nvme_process_cq()
In the above scenario, the nvme_process_cq() for the same queue may be
running on both CPU X and CPU Y concurrently.
It is much more easier to reproduce the issue when CONFIG_PREEMPT is
enabled in kernel. When CONFIG_PREEMPT is disabled, it would take longer
time for nvme_stop_queues()-->blk_mq_quiesce_queue() to wait for grace
period.
This patch protects nvme_process_cq() with nvmeq->cq_poll_lock in
nvme_reap_pending_cqes().
Fixes: fa46c6fb5d61 ("nvme/pci: move cqe check after device shutdown")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[PG: v5.2 has open/close {} still, since v5.2 doesn't have 324b494c2862]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b17b7436f2f0c4984f98a0b317b8362fd365700d upstream.
Skip the VMWRITE to update GUEST_CR3 if CR3 is not available, i.e. has
not been read from the VMCS since the last VM-Enter. If vcpu->arch.cr3
is stale, kvm_read_cr3(vcpu) will refresh vcpu->arch.cr3 from the VMCS,
meaning KVM will do a VMREAD and then VMWRITE the value it just pulled
from the VMCS.
Note, this is a purely theoretical change, no instances of skipping
the VMREAD+VMWRITE have been observed with this change.
Tested-by: Reto Buerki <reet@codelabs.ch>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 5e698222c70257d13ae0816720dde57c56f81e15 upstream.
Commit 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase
position index") is causing this bug (seen on 5.6.8):
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
# ipcmk -Q
Message queue id: 0
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
0x82db8127 0 root 644 0 0
# ipcmk -Q
Message queue id: 1
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
0x82db8127 0 root 644 0 0
0x76d1fb2a 1 root 644 0 0
# ipcrm -q 0
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
0x76d1fb2a 1 root 644 0 0
0x76d1fb2a 1 root 644 0 0
# ipcmk -Q
Message queue id: 2
# ipcrm -q 2
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
0x76d1fb2a 1 root 644 0 0
0x76d1fb2a 1 root 644 0 0
# ipcmk -Q
Message queue id: 3
# ipcrm -q 1
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
0x7c982867 3 root 644 0 0
0x7c982867 3 root 644 0 0
0x7c982867 3 root 644 0 0
0x7c982867 3 root 644 0 0
Whenever an IPC item with a low id is deleted, the items with higher ids
are duplicated, as if filling a hole.
new_pos should jump through hole of unused ids, pos can be updated
inside "for" cycle.
Fixes: 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase position index")
Reported-by: Andreas Schwab <schwab@suse.de>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit a67e408241783575716fcf3f79d0878f6cef0273 upstream.
Add kernel doc annotation for HRTIMER_MODE_HARD.
Fixes: ae6683d815895 ("hrtimer: Introduce HARD expiry mode")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190823113845.12125-2-bigeasy@linutronix.de
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit f367a62a7cad2447d835a9f14fc63997a9137246 upstream.
With inotify, when a watch is set on a directory and on its child, an
event on the child is reported twice, once with wd of the parent watch
and once with wd of the child watch without the filename.
With fanotify, when a watch is set on a directory and on its child, an
event on the child is reported twice, but it has the exact same
information - either an open file descriptor of the child or an encoded
fid of the child.
The reason that the two identical events are not merged is because the
object id used for merging events in the queue is the child inode in one
event and parent inode in the other.
For events with path or dentry data, use the victim inode instead of the
watched inode as the object id for event merging, so that the event
reported on parent will be merged with the event reported on the child.
Link: https://lore.kernel.org/r/20200319151022.31456-9-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit dfc2d2594e4a79204a3967585245f00644b8f838 upstream.
The event inode field is used only for comparison in queue merges and
cannot be dereferenced after handle_event(), because it does not hold a
refcount on the inode.
Replace it with an abstract id to do the same thing.
Link: https://lore.kernel.org/r/20200319151022.31456-8-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 11d6761218d19ca06ae5387f4e3692c4fa9e7493 upstream.
When I run my memcg testcase which creates lots of memcgs, I found
there're unexpected out of memory logs while there're still enough
available free memory. The error log is
mkdir: cannot create directory 'foo.65533': Cannot allocate memory
The reason is when we try to create more than MEM_CGROUP_ID_MAX memcgs,
an -ENOMEM errno will be set by mem_cgroup_css_alloc(), but the right
errno should be -ENOSPC "No space left on device", which is an
appropriate errno for userspace's failed mkdir.
As the errno really misled me, we should make it right. After this
patch, the error log will be
mkdir: cannot create directory 'foo.65533': No space left on device
[akpm@linux-foundation.org: s/EBUSY/ENOSPC/, per Michal]
[akpm@linux-foundation.org: s/EBUSY/ENOSPC/, per Michal]
Fixes: 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200407063621.GA18914@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/1586192163-20099-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit e08df079b23e2e982df15aa340bfbaf50f297504 upstream.
If the trapping instruction contains a ':', for a memory access through
segment registers for example, the sed substitution will insert the '*'
marker in the middle of the instruction instead of the line address:
2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction
I started to think I had forgotten some quirk of the assembly syntax
before noticing that it was actually coming from the script. Fix it to
add the address marker at the right place for these instructions:
28: 49 8b 06 mov (%r14),%rax
2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction
30: 0f 94 c0 sete %al
Fixes: 18ff44b189e2 ("scripts/decodecode: make faulting insn ptr more robust")
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20200419223653.GA31248@visor
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit d8dd25a461e4eec7190cb9d66616aceacc5110ad upstream.
When the current frame address (CFA) is stored on the stack (i.e.,
cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack
offset when there are subsequent pushes or pops. This results in bad
ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the
previous stack pointer on the stack and does a subsequent push.
This fixes the following unwinder warning:
WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0
Fixes: 627fce14809b ("objtool: Add ORC unwind table generation")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Dave Jones <dsj@fb.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Joe Mario <jmario@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c165d57b552aaca607fa5daf3fb524a6efe3c5a3 upstream.
gcc-10 points out that a code path exists where a pointer to a stack
variable may be passed back to the caller:
net/netfilter/nfnetlink_osf.c: In function 'nf_osf_hdr_ctx_init':
cc1: warning: function may return address of local variable [-Wreturn-local-addr]
net/netfilter/nfnetlink_osf.c:171:16: note: declared here
171 | struct tcphdr _tcph;
| ^~~~~
I am not sure whether this can happen in practice, but moving the
variable declaration into the callers avoids the problem.
Fixes: 31a9c29210e2 ("netfilter: nf_osf: add struct nf_osf_hdr_ctx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit ea64d8d6c675c0bb712689b13810301de9d8f77a upstream.
If the UDP header of a local VXLAN endpoint is NAT-ed, and the VXLAN
device has disabled UDP checksums and enabled Tx checksum offloading,
then the skb passed to udp_manip_pkt() has hdr->check == 0 (outer
checksum disabled) and skb->ip_summed == CHECKSUM_PARTIAL (inner packet
checksum offloaded).
Because of the ->ip_summed value, udp_manip_pkt() tries to update the
outer checksum with the new address and port, leading to an invalid
checksum sent on the wire, as the original null checksum obviously
didn't take the old address and port into account.
So, we can't take ->ip_summed into account in udp_manip_pkt(), as it
might not refer to the checksum we're acting on. Instead, we can base
the decision to update the UDP checksum entirely on the value of
hdr->check, because it's null if and only if checksum is disabled:
* A fully computed checksum can't be 0, since a 0 checksum is
represented by the CSUM_MANGLED_0 value instead.
* A partial checksum can't be 0, since the pseudo-header always adds
at least one non-zero value (the UDP protocol type 0x11) and adding
more values to the sum can't make it wrap to 0 as the carry is then
added to the wrapped number.
* A disabled checksum uses the special value 0.
The problem seems to be there from day one, although it was probably
not visible before UDP tunnels were implemented.
Fixes: 5b1158e909ec ("[NETFILTER]: Add NAT support for nf_conntrack")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 996ed22c7a5251d76dcdfe5026ef8230e90066d9 upstream.
When trying to lock read-only pages, sev_pin_memory() fails because
FOLL_WRITE is used as the flag for get_user_pages_fast().
Commit 73b0140bf0fe ("mm/gup: change GUP fast to use flags rather than a
write 'bool'") updated the get_user_pages_fast() call sites to use
flags, but incorrectly updated the call in sev_pin_memory(). As the
original coding of this call was correct, revert the change made by that
commit.
Fixes: 73b0140bf0fe ("mm/gup: change GUP fast to use flags rather than a write 'bool'")
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: http://lkml.kernel.org/r/20200423152419.87202-1-Janakarajan.Natarajan@amd.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 637543a8d61c6afe4e9be64bfb43c78701a83375 upstream.
Current logic incorrectly uses the enum ioapic_irq_destination_types
to check the posted interrupt destination types. However, the value was
set using APIC_DM_XXX macros, which are left-shifted by 8 bits.
Fixes by using the APIC_DM_FIXED and APIC_DM_LOWEST instead.
Fixes: (fdcf75621375 'KVM: x86: Disable posted interrupts for non-standard IRQs delivery modes')
Cc: Alexander Graf <graf@amazon.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1586239989-58305-1-git-send-email-suravee.suthikulpanit@amd.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 81b67439d147677d844d492fcbd03712ea438f42 upstream.
The following execution path is possible:
fsnotify()
[ realign the stack and store previous SP in R10 ]
<IRQ>
[ only IRET regs saved ]
common_interrupt()
interrupt_entry()
<NMI>
[ full pt_regs saved ]
...
[ unwind stack ]
When the unwinder goes through the NMI and the IRQ on the stack, and
then sees fsnotify(), it doesn't have access to the value of R10,
because it only has the five IRET registers. So the unwind stops
prematurely.
However, because the interrupt_entry() code is careful not to clobber
R10 before saving the full regs, the unwinder should be able to read R10
from the previously saved full pt_regs associated with the NMI.
Handle this case properly. When encountering an IRET regs frame
immediately after a full pt_regs frame, use the pt_regs as a backup
which can be used to get the C register values.
Also, note that a call frame resets the 'prev_regs' value, because a
function is free to clobber the registers. For this fix to work, the
IRET and full regs frames must be adjacent, with no FUNC frames in
between. So replace the FUNC hint in interrupt_entry() with an
IRET_REGS hint.
Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/97a408167cc09f1cfa0de31a7b70dd88868d743f.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit a0f81bf26888048100bf017fadf438a5bdffa8d8 upstream.
If the ORC entry type is unknown, nothing else can be done other than
reporting an error. Exit the function instead of breaking out of the
switch statement.
Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/a7fa668ca6eabbe81ab18b2424f15adbbfdc810a.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 98d0c8ebf77e0ba7c54a9ae05ea588f0e9e3f46e upstream.
If the unwinder is called before the ORC data has been initialized,
orc_find() returns NULL, and it tries to fall back to using frame
pointers. This can cause some unexpected warnings during boot.
Move the 'orc_init' check from orc_find() to __unwind_init(), so that it
doesn't even try to unwind from an uninitialized state.
Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/069d1499ad606d85532eb32ce39b2441679667d5.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit f1d9a2abff66aa8156fbc1493abed468db63ea48 upstream.
When unwinding an inactive task, the ORC unwinder skips the first frame
by default. If both the 'regs' and 'first_frame' parameters of
unwind_start() are NULL, 'state->sp' and 'first_frame' are later
initialized to the same value for an inactive task. Given there is a
"less than or equal to" comparison used at the end of __unwind_start()
for skipping stack frames, the first frame is skipped.
Drop the equal part of the comparison and make the behavior equivalent
to the frame pointer unwinder.
Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/7f08db872ab59e807016910acdbe82f744de7065.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit f977df7b7ca45a4ac4b66d30a8931d0434c394b1 upstream.
The LEAQ instruction in rewind_stack_do_exit() moves the stack pointer
directly below the pt_regs at the top of the task stack before calling
do_exit(). Tell the unwinder to expect pt_regs.
Fixes: 8c1f75587a18 ("x86/entry/64: Add unwind hint annotations")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/68c33e17ae5963854916a46f522624f8e1d264f2.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 1fb143634a38095b641a3a21220774799772dc4c upstream.
In swapgs_restore_regs_and_return_to_usermode, after the stack is
switched to the trampoline stack, the existing UNWIND_HINT_REGS hint is
no longer valid, which can result in the following ORC unwinder warning:
WARNING: can't dereference registers at 000000003aeb0cdd for ip swapgs_restore_regs_and_return_to_usermode+0x93/0xa0
For full correctness, we could try to add complicated unwind hints so
the unwinder could continue to find the registers, but when when it's
this close to kernel exit, unwind hints aren't really needed anymore and
it's fine to just use an empty hint which tells the unwinder to stop.
For consistency, also move the UNWIND_HINT_EMPTY in
entry_SYSCALL_64_after_hwframe to a similar location.
Fixes: 3e3b9293d392 ("x86/entry/64: Return to userspace from the trampoline stack")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Dave Jones <dsj@fb.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Joe Mario <jmario@redhat.com>
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/60ea8f562987ed2d9ace2977502fe481c0d7c9a0.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 06a9750edcffa808494d56da939085c35904e618 upstream.
The PUSH_AND_CLEAR_REGS macro zeroes each register immediately after
pushing it. If an NMI or exception hits after a register is cleared,
but before the UNWIND_HINT_REGS annotation, the ORC unwinder will
wrongly think the previous value of the register was zero. This can
confuse the unwinding process and cause it to exit early.
Because ORC is simpler than DWARF, there are a limited number of unwind
annotation states, so it's not possible to add an individual unwind hint
after each push/clear combination. Instead, the register clearing
instructions need to be consolidated and moved to after the
UNWIND_HINT_REGS annotation.
Fixes: 3f01daecd545 ("x86/entry/64: Introduce the PUSH_AND_CLEAN_REGS macro")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/68fd3d0bc92ae2d62ff7879d15d3684217d51f08.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 6f91a3f7af4186099dd10fa530dd7e0d9c29747d upstream.
batadv_v_ogm_process() invokes batadv_hardif_neigh_get(), which returns
a reference of the neighbor object to "hardif_neigh" with increased
refcount.
When batadv_v_ogm_process() returns, "hardif_neigh" becomes invalid, so
the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling paths of
batadv_v_ogm_process(). When batadv_v_ogm_orig_get() fails to get the
orig node and returns NULL, the refcnt increased by
batadv_hardif_neigh_get() is not decreased, causing a refcnt leak.
Fix this issue by jumping to "out" label when batadv_v_ogm_orig_get()
fails to get the orig node.
Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 6107c5da0fca8b50b4d3215e94d619d38cc4a18c upstream.
batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(),
which gets a batadv_hard_iface object from net_dev with increased refcnt
and its reference is assigned to a local pointer 'hard_iface'.
When batadv_store_throughput_override() returns, "hard_iface" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The issue happens in one error path of
batadv_store_throughput_override(). When batadv_parse_throughput()
returns NULL, the refcnt increased by batadv_hardif_get_by_netdev() is
not decreased, causing a refcnt leak.
Fix this issue by jumping to "out" label when batadv_parse_throughput()
returns NULL.
Fixes: 0b5ecc6811bd ("batman-adv: add throughput override attribute to hard_ifaces")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit f872de8185acf1b48b954ba5bd8f9bc0a0d14016 upstream.
batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(),
which gets a batadv_hard_iface object from net_dev with increased refcnt
and its reference is assigned to a local pointer 'hard_iface'.
When batadv_show_throughput_override() returns, "hard_iface" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The issue happens in the normal path of
batadv_show_throughput_override(), which forgets to decrease the refcnt
increased by batadv_hardif_get_by_netdev() before the function returns,
causing a refcnt leak.
Fix this issue by calling batadv_hardif_put() before the
batadv_show_throughput_override() returns in the normal path.
Fixes: 0b5ecc6811bd ("batman-adv: add throughput override attribute to hard_ifaces")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit fd0c42c4dea54335967c5a86f15fc064235a2797 upstream.
and change to pseudorandom numbers, as this is a traffic dithering
operation that doesn't need crypto-grade.
The previous code operated in 4 steps:
1. Generate a random byte 0 <= rand_tq <= 255
2. Multiply it by BATADV_TQ_MAX_VALUE - tq
3. Divide by 255 (= BATADV_TQ_MAX_VALUE)
4. Return BATADV_TQ_MAX_VALUE - rand_tq
This would apperar to scale (BATADV_TQ_MAX_VALUE - tq) by a random
value between 0/255 and 255/255.
But! The intermediate value between steps 3 and 4 is stored in a u8
variable. So it's truncated, and most of the time, is less than 255, after
which the division produces 0. Specifically, if tq is odd, the product is
always even, and can never be 255. If tq is even, there's exactly one
random byte value that will produce a product byte of 255.
Thus, the return value is 255 (511/512 of the time) or 254 (1/512
of the time).
If we assume that the truncation is a bug, and the code is meant to scale
the input, a simpler way of looking at it is that it's returning a random
value between tq and BATADV_TQ_MAX_VALUE, inclusive.
Well, we have an optimized function for doing just that.
Fixes: 3c12de9a5c75 ("batman-adv: network coding - code and transmit packets if possible")
Signed-off-by: George Spelvin <lkml@sdf.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c749bb2d554825e007cbc43b791f54e124dadfce upstream.
The current max_pfn equals to zero. In this case, I found it caused users
cannot get some page information through /proc such as kpagecount in v5.6
kernel because of new sanity checks. The following message is displayed by
stress-ng test suite with the command "stress-ng --verbose --physpage 1 -t
1" on HiFive unleashed board.
# stress-ng --verbose --physpage 1 -t 1
stress-ng: debug: [109] 4 processors online, 4 processors configured
stress-ng: info: [109] dispatching hogs: 1 physpage
stress-ng: debug: [109] cache allocate: reducing cache level from L3 (too high) to L0
stress-ng: debug: [109] get_cpu_cache: invalid cache_level: 0
stress-ng: info: [109] cache allocate: using built-in defaults as no suitable cache found
stress-ng: debug: [109] cache allocate: default cache size: 2048K
stress-ng: debug: [109] starting stressors
stress-ng: debug: [109] 1 stressor spawned
stress-ng: debug: [110] stress-ng-physpage: started [110] (instance 0)
stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd34de000 in /proc/kpagecount, errno=0 (Success)
stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success)
...
stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success)
stress-ng: debug: [110] stress-ng-physpage: exited [110] (instance 0)
stress-ng: debug: [109] process [110] terminated
stress-ng: info: [109] successful run completed in 1.00s
#
After applying this patch, the kernel can pass the test.
# stress-ng --verbose --physpage 1 -t 1
stress-ng: debug: [104] 4 processors online, 4 processors configured stress-ng: info: [104] dispatching hogs: 1 physpage
stress-ng: info: [104] cache allocate: using defaults, can't determine cache details from sysfs
stress-ng: debug: [104] cache allocate: default cache size: 2048K
stress-ng: debug: [104] starting stressors
stress-ng: debug: [104] 1 stressor spawned
stress-ng: debug: [105] stress-ng-physpage: started [105] (instance 0) stress-ng: debug: [105] stress-ng-physpage: exited [105] (instance 0) stress-ng: debug: [104] process [105] terminated
stress-ng: info: [104] successful run completed in 1.01s
#
Cc: stable@vger.kernel.org
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Yash Shah <yash.shah@sifive.com>
Tested-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 3740d93e37902b31159a82da2d5c8812ed825404 upstream.
Commit 64e90a8acb859 ("Introduce STATIC_USERMODEHELPER to mediate
call_usermodehelper()") added the optiont to disable all
call_usermodehelper() calls by setting STATIC_USERMODEHELPER_PATH to
an empty string. When this is done, and crashdump is triggered, it
will crash on null pointer dereference, since we make assumptions
over what call_usermodehelper_exec() did.
This has been reported by Sergey when one triggers a a coredump
with the following configuration:
```
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH=""
kernel.core_pattern = |/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h %e
```
The way disabling the umh was designed was that call_usermodehelper_exec()
would just return early, without an error. But coredump assumes
certain variables are set up for us when this happens, and calls
ile_start_write(cprm.file) with a NULL file.
[ 2.819676] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 2.819859] #PF: supervisor read access in kernel mode
[ 2.820035] #PF: error_code(0x0000) - not-present page
[ 2.820188] PGD 0 P4D 0
[ 2.820305] Oops: 0000 [#1] SMP PTI
[ 2.820436] CPU: 2 PID: 89 Comm: a Not tainted 5.7.0-rc1+ #7
[ 2.820680] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014
[ 2.821150] RIP: 0010:do_coredump+0xd80/0x1060
[ 2.821385] Code: e8 95 11 ed ff 48 c7 c6 cc a7 b4 81 48 8d bd 28 ff
ff ff 89 c2 e8 70 f1 ff ff 41 89 c2 85 c0 0f 84 72 f7 ff ff e9 b4 fe ff
ff <48> 8b 57 20 0f b7 02 66 25 00 f0 66 3d 00 8
0 0f 84 9c 01 00 00 44
[ 2.822014] RSP: 0000:ffffc9000029bcb8 EFLAGS: 00010246
[ 2.822339] RAX: 0000000000000000 RBX: ffff88803f860000 RCX: 000000000000000a
[ 2.822746] RDX: 0000000000000009 RSI: 0000000000000282 RDI: 0000000000000000
[ 2.823141] RBP: ffffc9000029bde8 R08: 0000000000000000 R09: ffffc9000029bc00
[ 2.823508] R10: 0000000000000001 R11: ffff88803dec90be R12: ffffffff81c39da0
[ 2.823902] R13: ffff88803de84400 R14: 0000000000000000 R15: 0000000000000000
[ 2.824285] FS: 00007fee08183540(0000) GS:ffff88803e480000(0000) knlGS:0000000000000000
[ 2.824767] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.825111] CR2: 0000000000000020 CR3: 000000003f856005 CR4: 0000000000060ea0
[ 2.825479] Call Trace:
[ 2.825790] get_signal+0x11e/0x720
[ 2.826087] do_signal+0x1d/0x670
[ 2.826361] ? force_sig_info_to_task+0xc1/0xf0
[ 2.826691] ? force_sig_fault+0x3c/0x40
[ 2.826996] ? do_trap+0xc9/0x100
[ 2.827179] exit_to_usermode_loop+0x49/0x90
[ 2.827359] prepare_exit_to_usermode+0x77/0xb0
[ 2.827559] ? invalid_op+0xa/0x30
[ 2.827747] ret_from_intr+0x20/0x20
[ 2.827921] RIP: 0033:0x55e2c76d2129
[ 2.828107] Code: 2d ff ff ff e8 68 ff ff ff 5d c6 05 18 2f 00 00 01
c3 0f 1f 80 00 00 00 00 c3 0f 1f 80 00 00 00 00 e9 7b ff ff ff 55 48 89
e5 <0f> 0b b8 00 00 00 00 5d c3 66 2e 0f 1f 84 0
0 00 00 00 00 0f 1f 40
[ 2.828603] RSP: 002b:00007fffeba5e080 EFLAGS: 00010246
[ 2.828801] RAX: 000055e2c76d2125 RBX: 0000000000000000 RCX: 00007fee0817c718
[ 2.829034] RDX: 00007fffeba5e188 RSI: 00007fffeba5e178 RDI: 0000000000000001
[ 2.829257] RBP: 00007fffeba5e080 R08: 0000000000000000 R09: 00007fee08193c00
[ 2.829482] R10: 0000000000000009 R11: 0000000000000000 R12: 000055e2c76d2040
[ 2.829727] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 2.829964] CR2: 0000000000000020
[ 2.830149] ---[ end trace ceed83d8c68a1bf1 ]---
```
Cc: <stable@vger.kernel.org> # v4.11+
Fixes: 64e90a8acb85 ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199795
Reported-by: Tony Vroon <chainsaw@gentoo.org>
Reported-by: Sergey Kvachonok <ravenexp@gmail.com>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200416162859.26518-1-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 769acc3656d93aaacada814939743361d284fd87 upstream.
Check the return value of gasket_get_bar_index function as it can return
a negative one (-EINVAL). If this happens, a negative index is used in
the "gasket_dev->bar_data" array.
Addresses-Coverity-ID: 1438542 ("Negative array index read")
Fixes: 9a69f5087ccc2 ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Richard Yeh <rcy@google.com>
Link: https://lore.kernel.org/r/20200501155118.13380-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 12ae44a40a1be891bdc6463f8c7072b4ede746ef upstream.
A misconfigured cephx can easily result in having the kernel client
flooding the logs with:
ceph: Can't lookup inode 1 (err: -13)
Change this message to debug level.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/44546
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 0fa8263367db9287aa0632f96c1a5f93cc478150 upstream.
Eduard reported a problem mounting cephfs on s390 arch. The feature
mask sent by the MDS is little-endian, so we need to convert it
before storing and testing against it.
Cc: stable@vger.kernel.org
Reported-and-Tested-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 14f69140ff9c92a0928547ceefb153a842e8492c upstream.
Commit 1c30844d2dfe ("mm: reclaim small amounts of memory when an
external fragmentation event occurs") adds a boost_watermark() function
which increases the min watermark in a zone by at least
pageblock_nr_pages or the number of pages in a page block.
On Arm64, with 64K pages and 512M huge pages, this is 8192 pages or
512M. It does this regardless of the number of managed pages managed in
the zone or the likelihood of success.
This can put the zone immediately under water in terms of allocating
pages from the zone, and can cause a small machine to fail immediately
due to OoM. Unlike set_recommended_min_free_kbytes(), which
substantially increases min_free_kbytes and is tied to THP,
boost_watermark() can be called even if THP is not active.
The problem is most likely to appear on architectures such as Arm64
where pageblock_nr_pages is very large.
It is desirable to run the kdump capture kernel in as small a space as
possible to avoid wasting memory. In some architectures, such as Arm64,
there are restrictions on where the capture kernel can run, and
therefore, the space available. A capture kernel running in 768M can
fail due to OoM immediately after boost_watermark() sets the min in zone
DMA32, where most of the memory is, to 512M. It fails even though there
is over 500M of free memory. With boost_watermark() suppressed, the
capture kernel can run successfully in 448M.
This patch limits boost_watermark() to boosting a zone's min watermark
only when there are enough pages that the boost will produce positive
results. In this case that is estimated to be four times as many pages
as pageblock_nr_pages.
Mel said:
: There is no harm in marking it stable. Clearly it does not happen very
: often but it's not impossible. 32-bit x86 is a lot less common now
: which would previously have been vulnerable to triggering this easily.
: ppc64 has a larger base page size but typically only has one zone.
: arm64 is likely the most vulnerable, particularly when CMA is
: configured with a small movable zone.
Fixes: 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs")
Signed-off-by: Henry Willard <henry.willard@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1588294148-6586-1-git-send-email-henry.willard@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit e84fe99b68ce353c37ceeecc95dce9696c976556 upstream.
Without CONFIG_PREEMPT, it can happen that we get soft lockups detected,
e.g., while booting up.
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1]
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0-next-20200331+ #4
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
RIP: __pageblock_pfn_to_page+0x134/0x1c0
Call Trace:
set_zone_contiguous+0x56/0x70
page_alloc_init_late+0x166/0x176
kernel_init_freeable+0xfa/0x255
kernel_init+0xa/0x106
ret_from_fork+0x35/0x40
The issue becomes visible when having a lot of memory (e.g., 4TB)
assigned to a single NUMA node - a system that can easily be created
using QEMU. Inside VMs on a hypervisor with quite some memory
overcommit, this is fairly easy to trigger.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200416073417.5003-1-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 412895f03cbf9633298111cb4dfde13b7720e2c5 upstream.
This patch does two things:
- fixes a lost wakeup introduced by commit 339ddb53d373 ("fs/epoll:
remove unnecessary wakeups of nested epoll")
- improves performance for events delivery.
The description of the problem is the following: if N (>1) threads are
waiting on ep->wq for new events and M (>1) events come, it is quite
likely that >1 wakeups hit the same wait queue entry, because there is
quite a big window between __add_wait_queue_exclusive() and the
following __remove_wait_queue() calls in ep_poll() function.
This can lead to lost wakeups, because thread, which was woken up, can
handle not all the events in ->rdllist. (in better words the problem is
described here: https://lkml.org/lkml/2019/10/7/905)
The idea of the current patch is to use init_wait() instead of
init_waitqueue_entry().
Internally init_wait() sets autoremove_wake_function as a callback,
which removes the wait entry atomically (under the wq locks) from the
list, thus the next coming wakeup hits the next wait entry in the wait
queue, thus preventing lost wakeups.
Problem is very well reproduced by the epoll60 test case [1].
Wait entry removal on wakeup has also performance benefits, because
there is no need to take a ep->lock and remove wait entry from the queue
after the successful wakeup. Here is the timing output of the epoll60
test case:
With explicit wakeup from ep_scan_ready_list() (the state of the
code prior 339ddb53d373):
real 0m6.970s
user 0m49.786s
sys 0m0.113s
After this patch:
real 0m5.220s
user 0m36.879s
sys 0m0.019s
The other testcase is the stress-epoll [2], where one thread consumes
all the events and other threads produce many events:
With explicit wakeup from ep_scan_ready_list() (the state of the
code prior 339ddb53d373):
threads events/ms run-time ms
8 5427 1474
16 6163 2596
32 6824 4689
64 7060 9064
128 6991 18309
After this patch:
threads events/ms run-time ms
8 5598 1429
16 7073 2262
32 7502 4265
64 7640 8376
128 7634 16767
(number of "events/ms" represents event bandwidth, thus higher is
better; number of "run-time ms" represents overall time spent
doing the benchmark, thus lower is better)
[1] tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c
[2] https://github.com/rouming/test-tools/blob/master/stress-epoll.c
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Baron <jbaron@akamai.com>
Cc: Khazhismel Kumykov <khazhy@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Heiher <r@hev.cc>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200430130326.1368509-2-rpenyaev@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b5f2006144c6ae941726037120fa1001ddede784 upstream.
Commit cc731525f26a ("signal: Remove kernel interal si_code magic")
changed the value of SI_FROMUSER(SI_MESGQ), this means that mq_notify() no
longer works if the sender doesn't have rights to send a signal.
Change __do_notify() to use do_send_sig_info() instead of kill_pid_info()
to avoid check_kill_permission().
This needs the additional notify.sigev_signo != 0 check, shouldn't we
change do_mq_notify() to deny sigev_signo == 0 ?
Test-case:
#include <signal.h>
#include <mqueue.h>
#include <unistd.h>
#include <sys/wait.h>
#include <assert.h>
static int notified;
static void sigh(int sig)
{
notified = 1;
}
int main(void)
{
signal(SIGIO, sigh);
int fd = mq_open("/mq", O_RDWR|O_CREAT, 0666, NULL);
assert(fd >= 0);
struct sigevent se = {
.sigev_notify = SIGEV_SIGNAL,
.sigev_signo = SIGIO,
};
assert(mq_notify(fd, &se) == 0);
if (!fork()) {
assert(setuid(1) == 0);
mq_send(fd, "",1,0);
return 0;
}
wait(NULL);
mq_unlink("/mq");
assert(notified);
return 0;
}
[manfred@colorfullife.com: 1) Add self_exec_id evaluation so that the implementation matches do_notify_parent 2) use PIDTYPE_TGID everywhere]
Fixes: cc731525f26a ("signal: Remove kernel interal si_code magic")
Reported-by: Yoji <yoji.fujihar.min@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: <1vier1@web.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/e2a782e4-eab9-4f5c-c749-c07a8f7a4e66@colorfullife.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 027d0c7101f50cf03aeea9eebf484afd4920c8d3 upstream.
The static analyzer in GCC 10 spotted that in huge_pte_alloc() we may
pass a NULL pmdp into pte_alloc_map() when pmd_alloc() returns NULL:
| CC arch/arm64/mm/pageattr.o
| CC arch/arm64/mm/hugetlbpage.o
| from arch/arm64/mm/hugetlbpage.c:10:
| arch/arm64/mm/hugetlbpage.c: In function ‘huge_pte_alloc’:
| ./arch/arm64/include/asm/pgtable-types.h:28:24: warning: dereference of NULL ‘pmdp’ [CWE-690] [-Wanalyzer-null-dereference]
| ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’
| arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’
| |arch/arm64/mm/hugetlbpage.c:232:10:
| |./arch/arm64/include/asm/pgtable-types.h:28:24:
| ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’
| arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’
This can only occur when the kernel cannot allocate a page, and so is
unlikely to happen in practice before other systems start failing.
We can avoid this by bailing out if pmd_alloc() fails, as we do earlier
in the function if pud_alloc() fails.
Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Kyrill Tkachov <kyrylo.tkachov@arm.com>
Cc: <stable@vger.kernel.org> # 4.5.x-
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 0225fd5e0a6a32af7af0aefac45c8ebf19dc5183 upstream.
In the unlikely event that a 32bit vcpu traps into the hypervisor
on an instruction that is located right at the end of the 32bit
range, the emulation of that instruction is going to increment
PC past the 32bit range. This isn't great, as userspace can then
observe this value and get a bit confused.
Conversly, userspace can do things like (in the context of a 64bit
guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0,
set PC to a 64bit value, change PSTATE to AArch32-USR, and observe
that PC hasn't been truncated. More confusion.
Fix both by:
- truncating PC increments for 32bit guests
- sanitizing all 32bit regs every time a core reg is changed by
userspace, and that PSTATE indicates a 32bit mode.
Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 1c32ca5dc6d00012f0c964e5fdd7042fcc71efb1 upstream.
When deciding whether a guest has to be stopped we check whether this
is a private interrupt or not. Unfortunately, there's an off-by-one bug
here, and we fail to recognize a whole range of interrupts as being
global (GICv2 SPIs 32-63).
Fix the condition from > to be >=.
Cc: stable@vger.kernel.org
Fixes: abd7229626b93 ("KVM: arm/arm64: Simplify active_change_prepare and plug race")
Reported-by: André Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c7cb2d650c9e78c03bd2d1c0db89891825f8c0f4 upstream.
Clear CF and ZF in the VM-Exit path after doing __FILL_RETURN_BUFFER so
that KVM doesn't interpret clobbered RFLAGS as a VM-Fail. Filling the
RSB has always clobbered RFLAGS, its current incarnation just happens
clear CF and ZF in the processs. Relying on the macro to clear CF and
ZF is extremely fragile, e.g. commit 089dd8e53126e ("x86/speculation:
Change FILL_RETURN_BUFFER to work with objtool") tweaks the loop such
that the ZF flag is always set.
Reported-by: Qian Cai <cai@lca.pw>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f2fde6a5bcfcf ("KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200506035355.2242-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit a9a8ba90fa5857c2c8a0e32eef2159cec717da11 upstream.
Rather than chunking via PAGE_SIZE, this commit changes the arch
implementations to chunk in explicit 4k parts, so that calculations on
maximum acceptable latency don't suddenly become invalid on platforms
where PAGE_SIZE isn't 4k, such as arm64.
Fixes: 0f961f9f670e ("crypto: x86/nhpoly1305 - add AVX2 accelerated NHPoly1305")
Fixes: 012c82388c03 ("crypto: x86/nhpoly1305 - add SSE2 accelerated NHPoly1305")
Fixes: a00fa0c88774 ("crypto: arm64/nhpoly1305 - add NEON-accelerated NHPoly1305")
Fixes: 16aae3595a9d ("crypto: arm/nhpoly1305 - add NEON-accelerated NHPoly1305")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 11f5efc3ab66284f7aaacc926e9351d658e2577b upstream.
x86_64 lazily maps in the vmalloc pages, and the way this works with per_cpu
areas can be complex, to say the least. Mappings may happen at boot up, and
if nothing synchronizes the page tables, those page mappings may not be
synced till they are used. This causes issues for anything that might touch
one of those mappings in the path of the page fault handler. When one of
those unmapped mappings is touched in the page fault handler, it will cause
another page fault, which in turn will cause a page fault, and leave us in
a loop of page faults.
Commit 763802b53a42 ("x86/mm: split vmalloc_sync_all()") split
vmalloc_sync_all() into vmalloc_sync_unmappings() and
vmalloc_sync_mappings(), as on system exit, it did not need to do a full
sync on x86_64 (although it still needed to be done on x86_32). By chance,
the vmalloc_sync_all() would synchronize the page mappings done at boot up
and prevent the per cpu area from being a problem for tracing in the page
fault handler. But when that synchronization in the exit of a task became a
nop, it caused the problem to appear.
Link: https://lore.kernel.org/r/20200429054857.66e8e333@oasis.local.home
Cc: stable@vger.kernel.org
Fixes: 737223fbca3b1 ("tracing: Consolidate buffer allocation code")
Reported-by: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com>
Suggested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit e9b3c610a05c1cdf8e959a6d89c38807ff758ee6 upstream.
We must not process packets shorter than a packet ID
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-and-tested-by: syzbot+d29e9263e13ce0b9f4fd@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 9f04db234af691007bb785342a06abab5fb34474 upstream.
This device needs US_FL_NO_REPORT_OPCODES to avoid going
through prolonged error handling on enumeration.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Julian Groß <julian.g@posteo.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200429155218.7308-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 0ed08faded1da03eb3def61502b27f81aef2e615 upstream.
The syzbot fuzzer discovered a bad race between in the usbhid driver
between usbhid_stop() and usbhid_close(). In particular,
usbhid_stop() does:
usb_free_urb(usbhid->urbin);
...
usbhid->urbin = NULL; /* don't mess up next start */
and usbhid_close() does:
usb_kill_urb(usbhid->urbin);
with no mutual exclusion. If the two routines happen to run
concurrently so that usb_kill_urb() is called in between the
usb_free_urb() and the NULL assignment, it will access the
deallocated urb structure -- a use-after-free bug.
This patch adds a mutex to the usbhid private structure and uses it to
enforce mutual exclusion of the usbhid_start(), usbhid_stop(),
usbhid_open() and usbhid_close() callbacks.
Reported-and-tested-by: syzbot+7bf5a7b0f0a1f9446f4c@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
Paul Gortmaker
Navid Emamdoost
Sean Christopherson
Paolo Bonzini
Hangbin Liu
Chuhong Yuan
Josh Poimboeuf
Dongli Zhang
Vasily Averin
Sebastian Andrzej Siewior
Amir Goldstein
Yafang Shao
Ivan Delalande
Arnd Bergmann
Guillaume Nault
Janakarajan Natarajan
Suravee Suthikulpanit
Miroslav Benes
Jann Horn
Xiyu Yang
George Spelvin
Vincent Chen
Luis Chamberlain
Oscar Carter
Luis Henriques
Jeff Layton
Henry Willard
David Hildenbrand
Roman Penyaev
Oleg Nesterov
Mark Rutland
Marc Zyngier
Jason A. Donenfeld
Steven Rostedt (VMware)
Oliver Neukum
Alan Stern