| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 528521f72b8f615e0930ba4b07d508ec73b07837 which is
commit 39ff83f2f6cc5cc1458dfcea9697f96338210beb upstream.
Arnd reports that this needs more review before being merged into all of
the trees.
Link: https://lore.kernel.org/r/CAK8P3a0z5jE=Z3Ps5bFTCFT7CHZR1JQ8VhdntDJAfsUxSPCcEw@mail.gmail.com
Reported-by: Arnd Bergmann <arnd@kernel.org>
Cc: Lukas Hannen <lukas.hannen@opensource.tttech-industrial.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 564005805aadec9cb7e5dc4e14071b8f87cd6b58 which is
commit 406dd42bd1ba0c01babf9cde169bb319e52f6147 upstream.
It is reported to cause regressions. A proposed fix has been posted,
but it is not in a released kernel yet. So just revert this from the
stable release so that the bug is fixed. If it's really needed we can
add it back in in a future release.
Link: https://lore.kernel.org/r/87ilz1pwaq.fsf@wylie.me.uk
Reported-by: "Alan J. Wylie" <alan@wylie.me.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Link: https://lore.kernel.org/r/20210913131113.390368911@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
unload/load driver
commit 05a7f4a8dff19999ca8a83a35ff4782689de7bfc upstream.
The change of namespaces during devlink reload calls to driver unload
before it accesses devlink parameters. The commands below causes to
use-after-free bug when trying to get flow steering mode.
* ip netns add n1
* devlink dev reload pci/0000:00:09.0 netns n1
==================================================================
BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
Read of size 4 at addr ffff888009d04308 by task devlink/275
CPU: 6 PID: 275 Comm: devlink Not tainted 5.12.0-rc2+ #2853
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x93/0xc2
print_address_description.constprop.0+0x18/0x140
? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
kasan_report.cold+0x7c/0xd8
? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
devlink_nl_param_fill+0x1c8/0xe80
? __free_pages_ok+0x37a/0x8a0
? devlink_flash_update_timeout_notify+0xd0/0xd0
? lock_acquire+0x1a9/0x6d0
? fs_reclaim_acquire+0xb7/0x160
? lock_is_held_type+0x98/0x110
? 0xffffffff81000000
? lock_release+0x1f9/0x6c0
? fs_reclaim_release+0xa1/0xf0
? lock_downgrade+0x6d0/0x6d0
? lock_is_held_type+0x98/0x110
? lock_is_held_type+0x98/0x110
? memset+0x20/0x40
? __build_skb_around+0x1f8/0x2b0
devlink_param_notify+0x6d/0x180
devlink_reload+0x1c3/0x520
? devlink_remote_reload_actions_performed+0x30/0x30
? mutex_trylock+0x24b/0x2d0
? devlink_nl_cmd_reload+0x62b/0x1070
devlink_nl_cmd_reload+0x66d/0x1070
? devlink_reload+0x520/0x520
? devlink_get_from_attrs+0x1bc/0x260
? devlink_nl_pre_doit+0x64/0x4d0
genl_family_rcv_msg_doit+0x1e9/0x2f0
? mutex_lock_io_nested+0x1130/0x1130
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? security_capable+0x51/0x90
genl_rcv_msg+0x27f/0x4a0
? genl_get_cmd+0x3c0/0x3c0
? lock_acquire+0x1a9/0x6d0
? devlink_reload+0x520/0x520
? lock_release+0x6c0/0x6c0
netlink_rcv_skb+0x11d/0x340
? genl_get_cmd+0x3c0/0x3c0
? netlink_ack+0x9f0/0x9f0
? lock_release+0x1f9/0x6c0
genl_rcv+0x24/0x40
netlink_unicast+0x433/0x700
? netlink_attachskb+0x730/0x730
? _copy_from_iter_full+0x178/0x650
? __alloc_skb+0x113/0x2b0
netlink_sendmsg+0x6f1/0xbd0
? netlink_unicast+0x700/0x700
? lock_is_held_type+0x98/0x110
? netlink_unicast+0x700/0x700
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x193/0x240
? __x64_sys_getpeername+0xb0/0xb0
? do_sys_openat2+0x10b/0x370
? __up_read+0x1a1/0x7b0
? do_user_addr_fault+0x219/0xdc0
? __x64_sys_openat+0x120/0x1d0
? __x64_sys_open+0x1a0/0x1a0
__x64_sys_sendto+0xdd/0x1b0
? syscall_enter_from_user_mode+0x1d/0x50
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc69d0af14a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
RSP: 002b:00007ffc1d8292f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fc69d0af14a
RDX: 0000000000000038 RSI: 0000555f57c56440 RDI: 0000000000000003
RBP: 0000555f57c56410 R08: 00007fc69d17b200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 146:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x99/0xc0
mlx5_init_fs+0xf0/0x1c50 [mlx5_core]
mlx5_load+0xd2/0x180 [mlx5_core]
mlx5_init_one+0x2f6/0x450 [mlx5_core]
probe_one+0x47d/0x6e0 [mlx5_core]
pci_device_probe+0x2a0/0x4a0
really_probe+0x20a/0xc90
driver_probe_device+0xd8/0x380
device_driver_attach+0x1df/0x250
__driver_attach+0xff/0x240
bus_for_each_dev+0x11e/0x1a0
bus_add_driver+0x309/0x570
driver_register+0x1ee/0x380
0xffffffffa06b8062
do_one_initcall+0xd5/0x410
do_init_module+0x1c8/0x760
load_module+0x6d8b/0x9650
__do_sys_finit_module+0x118/0x1b0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 275:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x102/0x140
slab_free_freelist_hook+0x74/0x1b0
kfree+0xd7/0x2a0
mlx5_unload+0x16/0xb0 [mlx5_core]
mlx5_unload_one+0xae/0x120 [mlx5_core]
mlx5_devlink_reload_down+0x1bc/0x380 [mlx5_core]
devlink_reload+0x141/0x520
devlink_nl_cmd_reload+0x66d/0x1070
genl_family_rcv_msg_doit+0x1e9/0x2f0
genl_rcv_msg+0x27f/0x4a0
netlink_rcv_skb+0x11d/0x340
genl_rcv+0x24/0x40
netlink_unicast+0x433/0x700
netlink_sendmsg+0x6f1/0xbd0
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x193/0x240
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888009d04300
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffff888009d04300, ffff888009d04380)
The buggy address belongs to the page:
page:0000000086a64ecc refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888009d04000 pfn:0x9d04
head:0000000086a64ecc order:1 compound_mapcount:0
flags: 0x4000000000010200(slab|head)
raw: 4000000000010200 ffffea0000203980 0000000200000002 ffff8880050428c0
raw: ffff888009d04000 000000008020001d 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009d04200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888009d04280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888009d04300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888009d04380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888009d04400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
The right solution to devlink reload is to notify about deletion of
parameters, unload driver, change net namespaces, load driver and notify
about addition of parameters.
Fixes: 070c63f20f6c ("net: devlink: allow to change namespaces during reload")
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aaedb9e00e5400220a8871180d23a83e67f29f63 upstream.
Since a few kernel releases the Pogoplug 4 has crashed like this
during boot:
Unable to handle kernel NULL pointer dereference at virtual address 00000002
(...)
[<c04116ec>] (strlen) from [<c00ead80>] (kstrdup+0x1c/0x4c)
[<c00ead80>] (kstrdup) from [<c04591d8>] (__clk_register+0x44/0x37c)
[<c04591d8>] (__clk_register) from [<c04595ec>] (clk_hw_register+0x20/0x44)
[<c04595ec>] (clk_hw_register) from [<c045bfa8>] (__clk_hw_register_mux+0x198/0x1e4)
[<c045bfa8>] (__clk_hw_register_mux) from [<c045c050>] (clk_register_mux_table+0x5c/0x6c)
[<c045c050>] (clk_register_mux_table) from [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac)
[<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0) from [<c0aceae0>] (of_clk_init+0x12c/0x214)
[<c0aceae0>] (of_clk_init) from [<c0ab576c>] (time_init+0x20/0x2c)
[<c0ab576c>] (time_init) from [<c0ab3d18>] (start_kernel+0x3dc/0x56c)
[<c0ab3d18>] (start_kernel) from [<00000000>] (0x0)
Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000)
This is because the "powersave" mux clock 0 was provided in an unterminated
array, which is required by the loop in the driver:
/* Count, allocate, and register clock muxes */
for (n = 0; desc[n].name;)
n++;
Here n will go out of bounds and then call clk_register_mux() on random
memory contents after the mux clock.
Fix this by terminating the array with a blank entry.
Fixes: 105299381d87 ("cpufreq: kirkwood: use the powersave multiplexer")
Cc: stable@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c42813b71a06a2ff4a155aa87ac609feeab76cf3 upstream.
Kernel v5.14 has various changes to optimize unaligned memory accesses,
e.g. commit 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers").
Those changes triggered an unalignment-exception and thus crashed the
bootloader on parisc because the unaligned "output_len" variable now suddenly
was read word-wise while it was read byte-wise in the past.
Fix this issue by declaring the external output_len variable as char which then
forces the compiler to generate byte-accesses.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: John David Anglin <dave.anglin@bell.net>
Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102162
Fixes: 8c031ba63f8f ("parisc: Unbreak bootloader due to gcc-7 optimizations")
Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79fad92f2e596f5a8dd085788a24f540263ef887 upstream.
Currently there are (at least) two problems in the way pwm_bl starts
managing the enable_gpio pin. Both occur when the backlight is initially
off and the driver finds the pin not already in output mode and, as a
result, unconditionally switches it to output-mode and asserts the signal.
Problem 1: This could cause the backlight to flicker since, at this stage
in driver initialisation, we have no idea what the PWM and regulator are
doing (an unconfigured PWM could easily "rest" at 100% duty cycle).
Problem 2: This will cause us not to correctly honour the
post_pwm_on_delay (which also risks flickers).
Fix this by moving the code to configure the GPIO output mode until after
we have examines the handover state. That allows us to initialize
enable_gpio to off if the backlight is currently off and on if the
backlight is on.
Cc: stable@vger.kernel.org
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 903bd067faa837fddb6e5c8b740c3374dc582f04 upstream.
The function `xbc_show_list should` handle the keys during the
composition. Even the errors returned by the compose function. Instead
of removing the `ret` variable, it should save the value and show the
exact error. This missing variable is causing a compilation issue also.
Link: https://lkml.kernel.org/r/163077087861.222577.12884543474750968146.stgit@devnote2
Fixes: e5efaeb8a8f5 ("bootconfig: Support mixing a value and subkeys under a key")
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9660dcbe0d9186976917c94bce4e69dbd8d7a974 upstream.
In commit 8010d74b9965b ("RDMA/mlx5: Split the WR setup out of
mlx5_ib_update_xlt()") the allocation logic was split out of
mlx5_ib_update_xlt() and the logic was changed to enable better OOM
handling. Sadly this change introduced a miscalculation of the number of
entries that were actually allocated when under memory pressure where it
can actually become 0 which on s390 lets dma_map_single() fail.
It can also lead to corruption of the free pages list when the wrong
number of entries is used in the calculation of sg->length which is used
as argument for free_pages().
Fix this by using the allocation size instead of misusing get_order(size).
Cc: stable@vger.kernel.org
Fixes: 8010d74b9965 ("RDMA/mlx5: Split the WR setup out of mlx5_ib_update_xlt()")
Link: https://lore.kernel.org/r/20210908081849.7948-1-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3265cc3ec52e75fc8daf189954cebda27ad26b2e upstream.
Find and verify PRMT before parsing it, which eliminates a
warning on machines without PRMT:
[ 7.197173] ACPI: PRMT not present
Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: 5.14+ <stable@vger.kernel.org> # 5.14+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c28051cdcbe9dfcec6bd0a4709d67a09df6edae upstream.
syzbot is reporting page fault at vga16fb_fillrect() [1], for
vga16fb_check_var() is failing to detect multiplication overflow.
if (vxres * vyres > maxmem) {
vyres = maxmem / vxres;
if (vyres < yres)
return -ENOMEM;
}
Since no module would accept too huge resolutions where multiplication
overflow happens, let's reject in the common path.
Link: https://syzkaller.appspot.com/bug?extid=04168c8063cfdde1db5e [1]
Reported-by: syzbot <syzbot+04168c8063cfdde1db5e@syzkaller.appspotmail.com>
Debugged-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/185175d6-227a-7b55-433d-b070929b262c@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8510505d55e194d3f6c9644c9f9d12c4f6b0395a upstream.
MD5 is a weak digest algorithm that shouldn't be used for cryptographic
operation. It hinders the efficiency of a patch set that aims to limit
the digests allowed for the extended file attribute namely security.ima.
MD5 is no longer a requirement for IMA, nor should it be used there.
The sole place where we still use the MD5 algorithm inside IMA is setting
the ima_hash algorithm to MD5, if the user supplies 'ima_hash=md5'
parameter on the command line. With commit ab60368ab6a4 ("ima: Fallback
to the builtin hash algorithm"), setting "ima_hash=md5" fails gracefully
when CRYPTO_MD5 is not set:
ima: Can not allocate md5 (reason: -2)
ima: Allocating md5 failed, going to use default hash algorithm sha256
Remove the CRYPTO_MD5 dependency for IMA.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
[zohar@linux.ibm.com: include commit number in patch description for
stable.]
Cc: stable@vger.kernel.org # 4.17
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a32ad90426a9c8eb3915eed26e08ce133bd9e0da upstream.
With W=1 build, the compiler throws warning message as below:
security/integrity/ima/ima_mok.c:24:12: warning:
no previous prototype for ‘ima_mok_init’ [-Wmissing-prototypes]
__init int ima_mok_init(void)
Silence the warning by adding static keyword to ima_mok_init().
Signed-off-by: Austin Kim <austin.kim@lge.com>
Fixes: 41c89b64d718 ("IMA: create machine owner and blacklist keyrings")
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 660585b56e63ca034ad506ea53c807c5cdca3196 upstream.
In case of fuse the MM subsystem doesn't guarantee that page writeback
completes by the time ->sync_fs() is called. This is because fuse
completes page writeback immediately to prevent DoS of memory reclaim by
the userspace file server.
This means that fuse itself must ensure that writes are synced before
sending the SYNCFS request to the server.
Introduce sync buckets, that hold a counter for the number of outstanding
write requests. On syncfs replace the current bucket with a new one and
wait until the old bucket's counter goes down to zero.
It is possible to have multiple syncfs calls in parallel, in which case
there could be more than one waited-on buckets. Descendant buckets must
not complete until the parent completes. Add a count to the child (new)
bucket until the (parent) old bucket completes.
Use RCU protection to dereference the current bucket and to wake up an
emptied bucket. Use fc->lock to protect against parallel assignments to
the current bucket.
This leaves just the counter to be a possible scalability issue. The
fc->num_waiting counter has a similar issue, so both should be addressed at
the same time.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Fixes: 2d82ab251ef0 ("virtiofs: propagate sync() to file server")
Cc: <stable@vger.kernel.org> # v5.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59bda8ecee2ffc6a602b7bf2b9e43ca669cdbdcd upstream.
Callers of fuse_writeback_range() assume that the file is ready for
modification by the server in the supplied byte range after the call
returns.
If there's a write that extends the file beyond the end of the supplied
range, then the file needs to be extended to at least the end of the range,
but currently that's not done.
There are at least two cases where this can cause problems:
- copy_file_range() will return short count if the file is not extended
up to end of the source range.
- FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE will not extend the file,
hence the region may not be fully allocated.
Fix by flushing writes from the start of the range up to the end of the
file. This could be optimized if the writes are non-extending, etc, but
it's probably not worth the trouble.
Fixes: a2bc92362941 ("fuse: fix copy_file_range() in the writeback case")
Fixes: 6b1bdb56b17c ("fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)")
Cc: <stable@vger.kernel.org> # v5.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76224355db7570cbe6b6f75c8929a1558828dd55 upstream.
fuse_finish_open() will be called with FUSE_NOWRITE in case of atomic
O_TRUNC. This can deadlock with fuse_wait_on_page_writeback() in
fuse_launder_page() triggered by invalidate_inode_pages2().
Fix by replacing invalidate_inode_pages2() in fuse_finish_open() with a
truncate_pagecache() call. This makes sense regardless of FOPEN_KEEP_CACHE
or fc->writeback cache, so do it unconditionally.
Reported-by: Xie Yongji <xieyongji@bytedance.com>
Reported-and-tested-by: syzbot+bea44a5189836d956894@syzkaller.appspotmail.com
Fixes: e4648309b85a ("fuse: truncate pending writes on O_TRUNC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 847fdae1579f4ee930b01f24a7847b8043bf468c upstream.
This fixes a minor bug which went unnoticed during the initial
driver upstreaming review: TCG_CR50 does not exist in mainline
kernels, so remove it.
Fixes: 3a253caaad11 ("char: tpm: add i2c driver for cr50")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46d4703b1db4c86ab5acb2331b10df999f005e8e upstream.
We are seeing the following warning in raid10_handle_discard.
[ 695.110751] =============================
[ 695.131439] WARNING: suspicious RCU usage
[ 695.151389] 4.18.0-319.el8.x86_64+debug #1 Not tainted
[ 695.174413] -----------------------------
[ 695.192603] drivers/md/raid10.c:1776 suspicious
rcu_dereference_check() usage!
[ 695.225107] other info that might help us debug this:
[ 695.260940] rcu_scheduler_active = 2, debug_locks = 1
[ 695.290157] no locks held by mkfs.xfs/10186.
In the first loop of function raid10_handle_discard. It already
determines which disk need to handle discard request and add the
rdev reference count rdev->nr_pending. So the conf->mirrors will
not change until all bios come back from underlayer disks. It
doesn't need to use rcu_dereference to get rdev.
Cc: stable@vger.kernel.org
Fixes: d30588b2731f ('md/raid10: improve raid10 discard request')
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ecc53c48c13d995e6fe5559e30ffee48d92784fd upstream.
For the two places where new workers are created, we diligently check if
we are allowed to create a new worker. If we're currently at the limit
of how many workers of a given type we can have, then we don't create
any new ones.
If you have a mixed workload with various types of bound and unbounded
work, then it can happen that a worker finishes one type of work and
is then transitioned to the other type. For this case, we don't check
if we are actually allowed to do so. This can cause io-wq to temporarily
exceed the allowed number of workers for a given type.
When retrieving work, check that the types match. If they don't, check
if we are allowed to transition to the other type. If not, then don't
handle the new work.
Cc: stable@vger.kernel.org
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf781869e5cf3e4ec1a47dad69b6f0df97629cbd upstream.
Add pinctrl-names and pinctrl-0 properties on controllers that claims to
use pins to avoid failures due to
commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
and also to avoid using pins that may be claimed my other IPs.
Fixes: b7c2b6157079 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210727074006.1609989-1-claudiu.beznea@microchip.com
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3134cc8beb69d0db9de651081707c4651c011621 upstream.
When a mapped level interrupt (a timer, for example) is deactivated
by the guest, the corresponding host interrupt is equally deactivated.
However, the fate of the pending state still needs to be dealt
with in SW.
This is specially true when the interrupt was in the active+pending
state in the virtual distributor at the point where the guest
was entered. On exit, the pending state is potentially stale
(the guest may have put the interrupt in a non-pending state).
If we don't do anything, the interrupt will be spuriously injected
in the guest. Although this shouldn't have any ill effect (spurious
interrupts are always possible), we can improve the emulation by
detecting the deactivation-while-pending case and resample the
interrupt.
While we're at it, move the logic into a common helper that can
be shared between the two GIC implementations.
Fixes: e40cc57bac79 ("KVM: arm/arm64: vgic: Support level-triggered mapped interrupts")
Reported-by: Raghavendra Rao Ananta <rananta@google.com>
Tested-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210819180305.1670525-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47e6223c841e029bfc23c3ce594dac5525cebaf8 upstream.
Booting a KVM host in protected mode with kmemleak quickly results
in a pretty bad crash, as kmemleak doesn't know that the HYP sections
have been taken away. This is specially true for the BSS section,
which is part of the kernel BSS section and registered at boot time
by kmemleak itself.
Unregister the HYP part of the BSS before making that section
HYP-private. The rest of the HYP-specific data is obtained via
the page allocator or lives in other sections, none of which is
subjected to kmemleak.
Fixes: 90134ac9cabb ("KVM: arm64: Protect the .hyp sections from the host")
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org # 5.13
Link: https://lore.kernel.org/r/20210802123830.2195174-3-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f7782bb8d818d8f47c26b22079db10599922787a upstream.
Clear nested.pi_pending on nested VM-Enter even if L2 will run without
posted interrupts enabled. If nested.pi_pending is left set from a
previous L2, vmx_complete_nested_posted_interrupt() will pick up the
stale flag and exit to userspace with an "internal emulation error" due
the new L2 not having a valid nested.pi_desc.
Arguably, vmx_complete_nested_posted_interrupt() should first check for
posted interrupts being enabled, but it's also completely reasonable that
KVM wouldn't screw up a fundamental flag. Not to mention that the mere
existence of nested.pi_pending is a long-standing bug as KVM shouldn't
move the posted interrupt out of the IRR until it's actually processed,
e.g. KVM effectively drops an interrupt when it performs a nested VM-Exit
with a "pending" posted interrupt. Fixing the mess is a future problem.
Prior to vmx_complete_nested_posted_interrupt() interpreting a null PI
descriptor as an error, this was a benign bug as the null PI descriptor
effectively served as a check on PI not being enabled. Even then, the
new flow did not become problematic until KVM started checking the result
of kvm_check_nested_events().
Fixes: 705699a13994 ("KVM: nVMX: Enable nested posted interrupt processing")
Fixes: 966eefb89657 ("KVM: nVMX: Disable vmcs02 posted interrupts if vmcs12 PID isn't mappable")
Fixes: 47d3530f86c0 ("KVM: x86: Exit to userspace when kvm_check_nested_events fails")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210810144526.2662272-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81b4b56d4f8130bbb99cf4e2b48082e5b4cfccb9 upstream.
If we are emulating an invalid guest state, we don't have a correct
exit reason, and thus we shouldn't do anything in this function.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210826095750.1650467-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 95b5a48c4f2b ("KVM: VMX: Handle NMIs, #MCs and async #PFs in common irqs-disabled fn", 2019-06-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 088acd23526647844aec1c39db4ad02552c86c7b upstream.
Factor in whether or not the old/new SPTEs are shadow-present when
adjusting the large page stats in the TDP MMU. A modified MMIO SPTE can
toggle the page size bit, as bit 7 is used to store the MMIO generation,
i.e. is_large_pte() can get a false positive when called on a MMIO SPTE.
Ditto for nuking SPTEs with REMOVED_SPTE, which sets bit 7 in its magic
value.
Opportunistically move the logic below the check to verify at least one
of the old/new SPTEs is shadow present.
Use is/was_leaf even though is/was_present would suffice. The code
generation is roughly equivalent since all flags need to be computed
prior to the code in question, and using the *_leaf flags will minimize
the diff in a future enhancement to account all pages, i.e. will change
the check to "is_leaf != was_leaf".
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Fixes: 1699f65c8b65 ("kvm/x86: Fix 'lpages' kvm stat for TDM MMU")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20210803044607.599629-3-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec607a564f70519b340f7eb4cfc0f4a6b55285ac upstream.
This change started as a way to make kvm_mmu_hugepage_adjust a bit simpler,
but it does fix two bugs as well.
One bug is in zapping collapsible PTEs. If a large page size is
disallowed but not all of them, kvm_mmu_max_mapping_level will return the
host mapping level and the small PTEs will be zapped up to that level.
However, if e.g. 1GB are prohibited, we can still zap 4KB mapping and
preserve the 2MB ones. This can happen for example when NX huge pages
are in use.
The second would happen when userspace backs guest memory
with a 1gb hugepage but only assign a subset of the page to
the guest. 1gb pages would be disallowed by the memslot, but
not 2mb. kvm_mmu_max_mapping_level() would fall through to the
host_pfn_mapping_level() logic, see the 1gb hugepage, and map the whole
thing into the guest.
Fixes: 2f57b7051fe8 ("KVM: x86/mmu: Persist gfn_lpage_is_disallowed() to max_level")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
adjusted
commit d9130a2dfdd4b21736c91b818f87dbc0ccd1e757 upstream.
When MSR_IA32_TSC_ADJUST is written by guest due to TSC ADJUST feature
especially there's a big tsc warp (like a new vCPU is hot-added into VM
which has been up for a long time), tsc_offset is added by a large value
then go back to guest. This causes system time jump as tsc_timestamp is
not adjusted in the meantime and pvclock monotonic character.
To fix this, just notify kvm to update vCPU's guest time before back to
guest.
Cc: stable@vger.kernel.org
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1619576521-81399-2-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3e03bc1368c1bc16e19b001fc96dc7430573cc8 upstream.
While in practice vcpu->vcpu_idx == vcpu->vcp_id is often true, it may
not always be, and we must not rely on this. Reason is that KVM decides
the vcpu_idx, userspace decides the vcpu_id, thus the two might not
match.
Currently kvm->arch.idle_mask is indexed by vcpu_id, which implies
that code like
for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) {
vcpu = kvm_get_vcpu(kvm, vcpu_id);
do_stuff(vcpu);
}
is not legit. Reason is that kvm_get_vcpu expects an vcpu_idx, not an
vcpu_id. The trouble is, we do actually use kvm->arch.idle_mask like
this. To fix this problem we have two options. Either use
kvm_get_vcpu_by_id(vcpu_id), which would loop to find the right vcpu_id,
or switch to indexing via vcpu_idx. The latter is preferable for obvious
reasons.
Let us make switch from indexing kvm->arch.idle_mask by vcpu_id to
indexing it by vcpu_idx. To keep gisa_int.kicked_mask indexed by the
same index as idle_mask lets make the same change for it as well.
Fixes: 1ee0bc559dc3 ("KVM: s390: get rid of local_int array")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Bornträger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 3.15+
Link: https://lore.kernel.org/r/20210827125429.1912577-1-pasic@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7177339d7b5f9594b316842122b5fda9513d5e2 upstream.
Revert a misguided illegal GPA check when "translating" a non-nested GPA.
The check is woefully incomplete as it does not fill in @exception as
expected by all callers, which leads to KVM attempting to inject a bogus
exception, potentially exposing kernel stack information in the process.
WARNING: CPU: 0 PID: 8469 at arch/x86/kvm/x86.c:525 exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525
CPU: 1 PID: 8469 Comm: syz-executor531 Not tainted 5.14.0-rc7-syzkaller #0
RIP: 0010:exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525
Call Trace:
x86_emulate_instruction+0xef6/0x1460 arch/x86/kvm/x86.c:7853
kvm_mmu_page_fault+0x2f0/0x1810 arch/x86/kvm/mmu/mmu.c:5199
handle_ept_misconfig+0xdf/0x3e0 arch/x86/kvm/vmx/vmx.c:5336
__vmx_handle_exit arch/x86/kvm/vmx/vmx.c:6021 [inline]
vmx_handle_exit+0x336/0x1800 arch/x86/kvm/vmx/vmx.c:6038
vcpu_enter_guest+0x2a1c/0x4430 arch/x86/kvm/x86.c:9712
vcpu_run arch/x86/kvm/x86.c:9779 [inline]
kvm_arch_vcpu_ioctl_run+0x47d/0x1b20 arch/x86/kvm/x86.c:10010
kvm_vcpu_ioctl+0x49e/0xe50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3652
The bug has escaped notice because practically speaking the GPA check is
useless. The GPA check in question only comes into play when KVM is
walking guest page tables (or "translating" CR3), and KVM already handles
illegal GPA checks by setting reserved bits in rsvd_bits_mask for each
PxE, or in the case of CR3 for loading PTDPTRs, manually checks for an
illegal CR3. This particular failure doesn't hit the existing reserved
bits checks because syzbot sets guest.MAXPHYADDR=1, and IA32 architecture
simply doesn't allow for such an absurd MAXPHYADDR, e.g. 32-bit paging
doesn't define any reserved PA bits checks, which KVM emulates by only
incorporating the reserved PA bits into the "high" bits, i.e. bits 63:32.
Simply remove the bogus check. There is zero meaningful value and no
architectural justification for supporting guest.MAXPHYADDR < 32, and
properly filling the exception would introduce non-trivial complexity.
This reverts commit ec7771ab471ba6a945350353617e2e3385d0e013.
Fixes: ec7771ab471b ("KVM: x86: mmu: Add guest physical address check in translate_gpa()")
Cc: stable@vger.kernel.org
Reported-by: syzbot+200c08e88ae818f849ce@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210831164224.1119728-2-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3f2cbe3810a60111a33f5f6267bd5a237b826fc9 upstream.
skx_iio_cleanup_mapping() is re-used for snr and icx, but in those
cases it fails to use the appropriate XXX_iio_mapping_group and as
such fails to free previously allocated resources, leading to memory
leaks.
Fixes: 10337e95e04c ("perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on ICX")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
[peterz: Changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210706090723.41850-1-alexander.antonov@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bb2853a6a421a052268eee00fd5d3f6b3504b2b1 upstream.
The ops->receive_buf() may be accessed concurrently from these two
functions. If the driver flushes data to the line discipline
receive_buf() method while tiocsti() is waiting for the
ops->receive_buf() to finish its work, the data race will happen.
For example:
tty_ioctl |tty_ldisc_receive_buf
->tioctsi | ->tty_port_default_receive_buf
| ->tty_ldisc_receive_buf
->hci_uart_tty_receive | ->hci_uart_tty_receive
->h4_recv | ->h4_recv
In this case, the h4 receive buffer will be overwritten by the
latecomer, and we will lost the data.
Hence, change tioctsi() function to use the exclusive lock interface
from tty_buffer to avoid the data race.
Reported-by: syzbot+97388eb9d31b997fe1d0@syzkaller.appspotmail.com
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210823000641.2082292-1-phind.uet@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7321be2663da5922343cc121f1ff04924cee2e76 upstream.
We were incorrectly initializing the posix extensions in the
conversion to the new mount API.
CC: <stable@vger.kernel.org> # 5.11+
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Suggested-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3998f0b8bc49ec784990971dc1f16bf367b19078 upstream.
RHBZ: 1994393
If we hit a STATUS_USER_SESSION_DELETED for the Create part in the
Create/QueryDirectory compound that starts a directory scan
we will leak EDEADLK back to userspace and surprise glibc and the application.
Pick this up initiate_cifs_search() and retry a small number of tries before we
return an error to userspace.
Cc: stable@vger.kernel.org
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6607cd319b6b91bff94e90f798a61c031650b514 upstream.
We can't split write behind bio with more than BIO_MAX_VECS sectors,
otherwise the below call trace was triggered because we could allocate
oversized write behind bio later.
[ 8.097936] bvec_alloc+0x90/0xc0
[ 8.098934] bio_alloc_bioset+0x1b3/0x260
[ 8.099959] raid1_make_request+0x9ce/0xc50 [raid1]
[ 8.100988] ? __bio_clone_fast+0xa8/0xe0
[ 8.102008] md_handle_request+0x158/0x1d0 [md_mod]
[ 8.103050] md_submit_bio+0xcd/0x110 [md_mod]
[ 8.104084] submit_bio_noacct+0x139/0x530
[ 8.105127] submit_bio+0x78/0x1d0
[ 8.106163] ext4_io_submit+0x48/0x60 [ext4]
[ 8.107242] ext4_writepages+0x652/0x1170 [ext4]
[ 8.108300] ? do_writepages+0x41/0x100
[ 8.109338] ? __ext4_mark_inode_dirty+0x240/0x240 [ext4]
[ 8.110406] do_writepages+0x41/0x100
[ 8.111450] __filemap_fdatawrite_range+0xc5/0x100
[ 8.112513] file_write_and_wait_range+0x61/0xb0
[ 8.113564] ext4_sync_file+0x73/0x370 [ext4]
[ 8.114607] __x64_sys_fsync+0x33/0x60
[ 8.115635] do_syscall_64+0x33/0x40
[ 8.116670] entry_SYSCALL_64_after_hwframe+0x44/0xae
Thanks for the comment from Christoph.
[1]. https://bugs.archlinux.org/task/70992
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Jens Stutte <jens@chianterastutte.eu>
Tested-by: Jens Stutte <jens@chianterastutte.eu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d9cf3bd531844ffbfe94b16e417037a16efc988d upstream.
__bio_iov_append_get_pages() doesn't put not appended pages on
bio_add_hw_page() failure, so potentially leaking them, fix it. Also, do
the same for __bio_iov_iter_get_pages(), even though it looks like it
can't be triggered by userspace in this case.
Fixes: 0512a75b98f8 ("block: Introduce REQ_OP_ZONE_APPEND")
Cc: stable@vger.kernel.org # 5.8+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1edfa6a2ffd66d55e6345a477df5387d2c1415d0.1626653825.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ae2eb9dde18979b40629dd413b9adbd6c894cdf upstream.
When we cancel a timeout we should mark it with REQ_F_FAIL, so
linked requests are cancelled as well, but not queued for further
execution.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fff625b44eeced3a5cae79f60e6acf3fbdf8f990.1631192135.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2fc2a7a62eb58650e71b4550cf6fa6cc0a75b2d2 upstream.
It currently takes a long, and while that's normally OK, the io_uring
limit is an int. Internally in io_uring it's an int, but sometimes it's
passed as a long. That can yield confusing results where a completions
seems to generate a huge result:
ou-sqp-1297-1298 [001] ...1 788.056371: io_uring_complete: ring 000000000e98e046, user_data 0x0, result 4294967171, cflags 0
which is due to -ECANCELED being stored in an unsigned, and then passed
in as a long. Using the right int type, the trace looks correct:
iou-sqp-338-339 [002] ...1 15.633098: io_uring_complete: ring 00000000e0ac60cf, user_data 0x0, result -125, cflags 0
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b3188e7ed54102a5dcc73d07727f41fb528f7c8 upstream.
During some testing, it became evident that using IORING_OP_WRITE doesn't
hash buffered writes like the other writes commands do. That's simply
an oversight, and can cause performance regressions when doing buffered
writes with this command.
Correct that and add the flag, so that buffered writes are correctly
hashed when using the non-iovec based write command.
Cc: stable@vger.kernel.org
Fixes: 3a6820f2bb8a ("io_uring: add non-vectored read/write commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a1b8a4e843f96b636431450d8d79061605cf74b upstream.
Limit the number of files in io_uring fixed tables by RLIMIT_NOFILE,
that's the first and the simpliest restriction that we should impose.
Cc: stable@vger.kernel.org
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b2756c340aed7d6c0b302c26dab50c6c5907f4ce.1629451684.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 333ff32d54cdefc2e479892e7f15ac91e026b57d upstream.
Fixes: 718e05ed92ec ("auxdisplay: Introduce hd44780_common.[ch]")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/CAHp75VfKyqy+vM0XkP9Yb+znGOTVT4zYCRY3A3nQ7C3WNUVN0g@mail.gmail.com/
Reported-By: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[added Link, Fixes, Cc stable tags, edited message]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 39ff83f2f6cc5cc1458dfcea9697f96338210beb upstream.
timespec64_ns() prevents multiplication overflows by comparing the seconds
value of the timespec to KTIME_SEC_MAX. If the value is greater or equal it
returns KTIME_MAX.
But that check casts the signed seconds value to unsigned which makes the
comparision true for all negative values and therefore return wrongly
KTIME_MAX.
Negative second values are perfectly valid and required in some places,
e.g. ptp_clock_adjtime().
Remove the cast and add a check for the negative boundary which is required
to prevent undefined behaviour due to multiplication underflow.
Fixes: cb47755725da ("time: Prevent undefined behaviour in timespec64_to_ns()")'
Signed-off-by: Lukas Hannen <lukas.hannen@opensource.tttech-industrial.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/AM6PR01MB541637BD6F336B8FFB72AF80EEC69@AM6PR01MB5416.eurprd01.prod.exchangelabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dddd3d65293a52c2c3850c19b1e5115712e534d8 upstream.
We must flush all the dirty data when enabling checkpoint back. Let's guarantee
that first by adding a retry logic on sync_inodes_sb(). In addition to that,
this patch adds to flush data in fsync when checkpoint is disabled, which can
mitigate the sync_inodes_sb() failures in advance.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2f32c147a3816d789722c0bd242a9431332ec3ed upstream.
The Samsung Galaxy Book Flex2 Alpha uses an ax201 with the ID a0f0/6074.
This works fine with the existing driver once it knows to claim it.
Simple patch to add the device.
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210702223155.1981510-1-jforbes@fedoraproject.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1ea05723c27a6f77894a60038a7b2b12fcec9a7 upstream.
In commit 772d44526e20 ("ASoC: rt5682: Properly turn off regulators if
wrong device ID") I deleted code but forgot to delete a variable
that's now unused. Delete it.
Fixes: 772d44526e20 ("ASoC: rt5682: Properly turn off regulators if wrong device ID")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210813073402.1.Iaa9425cfab80f5233afa78b32d02b6dc23256eb3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 92548b0ee220e000d81c27ac9a80e0ede895a881 ]
The UDP length field should be in network order.
This removes the following sparse error:
net/ipv4/route.c:3173:27: warning: incorrect type in assignment (different base types)
net/ipv4/route.c:3173:27: expected restricted __be16 [usertype] len
net/ipv4/route.c:3173:27: got unsigned long
Fixes: 404eb77ea766 ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e4428b6dba9b683dc2ec0a56ed7879de3200cce ]
With current config, for packets with IPv4 checksum errors,
errorcode is being set to UNKNOWN. Hence added a separate
errorcodes for outer and inner IPv4 checksum and changed
NPC configuration accordingly.
Also turn on L2 multicast address check in NPC protocol check block.
Fixes: 6b3321bacc5a ("octeontx2-af: Enable packet length and csum validation")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 698a82ebfb4b2f2014baf31b7324b328a2a6366e ]
This patch fixes the static code analyzer reported issues
in rvu_npc.c. The reported errors are different sizes of
operands in bitops and returning uninitialized values.
Fixes: 651cd2652339 ("octeontx2-af: MCAM entry installation support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f2e4568ec95166605c77577953b2787c7f909978 ]
In npc_update_vf_flow_entry function the loop cursor
'index' is being changed inside the loop causing
the loop to spin forever. This in turn hogs the kworker
thread forever and no other mbox message is processed
by AF driver after that. Fix this by using
another variable in the loop.
Fixes: 55307fcb9258 ("octeontx2-af: Add mbox messages to install and delete MCAM rules")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6537e96d743b89294b397b4865c6c061abae31b0 ]
When the given counter does not belong to the entry
then code ends up in infinite loop because the loop
cursor, entry is not getting updated further. This
patch fixes that by updating entry for every iteration.
Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
Greg Kroah-Hartman
Leon Romanovsky
Linus Walleij
Helge Deller
Daniel Thompson
Julio Faracco
Niklas Schnelle
Aubrey Li
Tetsuo Handa
THOBY Simon
Austin Kim
Miklos Szeredi
Adrian Ratiu
Xiao Ni
Jens Axboe
Claudiu Beznea
Marc Zyngier
Sean Christopherson
Maxim Levitsky
Paolo Bonzini
Zelin Deng
Halil Pasic
Alexander Antonov
Nguyen Dinh Phi
Steve French
Ronnie Sahlberg
Guoqing Jiang
Pavel Begunkov
Lars Poeschel
Lukas Hannen
Jaegeuk Kim
Justin M. Forbes
Douglas Anderson
Eric Dumazet
Sunil Goutham
Subbaraya Sundeep