aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/sgtl5000.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/sgtl5000.c')
-rw-r--r--sound/soc/codecs/sgtl5000.c37
1 files changed, 36 insertions, 1 deletions
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 8e5e48f6a24b..c58ad2a13e4e 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1343,7 +1343,8 @@ static int sgtl5000_set_power_regs(struct snd_soc_component *component)
* if vddio == vdda the source of charge pump should be
* assigned manually to VDDIO
*/
- if (vddio == vdda) {
+ if (regulator_is_equal(sgtl5000->supplies[VDDA].consumer,
+ sgtl5000->supplies[VDDIO].consumer)) {
lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
SGTL5000_VDDC_MAN_ASSN_SHIFT;
@@ -1643,6 +1644,40 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
dev_err(&client->dev,
"Error %d initializing CHIP_CLK_CTRL\n", ret);
+ /* Mute everything to avoid pop from the following power-up */
+ ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL,
+ SGTL5000_CHIP_ANA_CTRL_DEFAULT);
+ if (ret) {
+ dev_err(&client->dev,
+ "Error %d muting outputs via CHIP_ANA_CTRL\n", ret);
+ goto disable_clk;
+ }
+
+ /*
+ * If VAG is powered-on (e.g. from previous boot), it would be disabled
+ * by the write to ANA_POWER in later steps of the probe code. This
+ * may create a loud pop even with all outputs muted. The proper way
+ * to circumvent this is disabling the bit first and waiting the proper
+ * cool-down time.
+ */
+ ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value);
+ if (ret) {
+ dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret);
+ goto disable_clk;
+ }
+ if (value & SGTL5000_VAG_POWERUP) {
+ ret = regmap_update_bits(sgtl5000->regmap,
+ SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP,
+ 0);
+ if (ret) {
+ dev_err(&client->dev, "Error %d disabling VAG\n", ret);
+ goto disable_clk;
+ }
+
+ msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+ }
+
/* Follow section 2.2.1.1 of AN3663 */
ana_pwr = SGTL5000_ANA_POWER_DEFAULT;
if (sgtl5000->num_supplies <= VDDD) {