diff options
Diffstat (limited to 'kernel/bpf/verifier.c')
-rw-r--r-- | kernel/bpf/verifier.c | 210 |
1 files changed, 134 insertions, 76 deletions
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 1cc945daa9c8..1c53ccbd5b5d 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -227,8 +227,7 @@ struct bpf_call_arg_meta { bool pkt_access; int regno; int access_size; - s64 msize_smax_value; - u64 msize_umax_value; + u64 msize_max_value; int ref_obj_id; int func_id; u32 btf_id; @@ -1034,17 +1033,6 @@ static void __reg_bound_offset(struct bpf_reg_state *reg) reg->umax_value)); } -static void __reg_bound_offset32(struct bpf_reg_state *reg) -{ - u64 mask = 0xffffFFFF; - struct tnum range = tnum_range(reg->umin_value & mask, - reg->umax_value & mask); - struct tnum lo32 = tnum_cast(reg->var_off, 4); - struct tnum hi32 = tnum_lshift(tnum_rshift(reg->var_off, 32), 32); - - reg->var_off = tnum_or(hi32, tnum_intersect(lo32, range)); -} - /* Reset the min/max bounds of a register */ static void __mark_reg_unbounded(struct bpf_reg_state *reg) { @@ -1930,6 +1918,15 @@ static bool register_is_const(struct bpf_reg_state *reg) return reg->type == SCALAR_VALUE && tnum_is_const(reg->var_off); } +static bool __is_pointer_value(bool allow_ptr_leaks, + const struct bpf_reg_state *reg) +{ + if (allow_ptr_leaks) + return false; + + return reg->type != SCALAR_VALUE; +} + static void save_register_state(struct bpf_func_state *state, int spi, struct bpf_reg_state *reg) { @@ -2120,6 +2117,16 @@ static int check_stack_read(struct bpf_verifier_env *env, * which resets stack/reg liveness for state transitions */ state->regs[value_regno].live |= REG_LIVE_WRITTEN; + } else if (__is_pointer_value(env->allow_ptr_leaks, reg)) { + /* If value_regno==-1, the caller is asking us whether + * it is acceptable to use this value as a SCALAR_VALUE + * (e.g. for XADD). + * We must not allow unprivileged callers to do that + * with spilled pointers. + */ + verbose(env, "leaking pointer from stack off %d\n", + off); + return -EACCES; } mark_reg_read(env, reg, reg->parent, REG_LIVE_READ64); } else { @@ -2485,15 +2492,6 @@ static int check_sock_access(struct bpf_verifier_env *env, int insn_idx, return -EACCES; } -static bool __is_pointer_value(bool allow_ptr_leaks, - const struct bpf_reg_state *reg) -{ - if (allow_ptr_leaks) - return false; - - return reg->type != SCALAR_VALUE; -} - static struct bpf_reg_state *reg_state(struct bpf_verifier_env *env, int regno) { return cur_regs(env) + regno; @@ -2887,7 +2885,7 @@ static int check_ptr_to_btf_access(struct bpf_verifier_env *env, if (ret < 0) return ret; - if (atype == BPF_READ) { + if (atype == BPF_READ && value_regno >= 0) { if (ret == SCALAR_VALUE) { mark_reg_unknown(env, regs, value_regno); return 0; @@ -3579,8 +3577,7 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 regno, /* remember the mem_size which may be used later * to refine return values. */ - meta->msize_smax_value = reg->smax_value; - meta->msize_umax_value = reg->umax_value; + meta->msize_max_value = reg->umax_value; /* The register is SCALAR_VALUE; the access check * happens using its boundaries. @@ -4106,21 +4103,44 @@ static int prepare_func_exit(struct bpf_verifier_env *env, int *insn_idx) return 0; } -static void do_refine_retval_range(struct bpf_reg_state *regs, int ret_type, - int func_id, - struct bpf_call_arg_meta *meta) +static int do_refine_retval_range(struct bpf_verifier_env *env, + struct bpf_reg_state *regs, int ret_type, + int func_id, struct bpf_call_arg_meta *meta) { struct bpf_reg_state *ret_reg = ®s[BPF_REG_0]; + struct bpf_reg_state tmp_reg = *ret_reg; + bool ret; if (ret_type != RET_INTEGER || (func_id != BPF_FUNC_get_stack && func_id != BPF_FUNC_probe_read_str)) - return; + return 0; + + /* Error case where ret is in interval [S32MIN, -1]. */ + ret_reg->smin_value = S32_MIN; + ret_reg->smax_value = -1; + + __reg_deduce_bounds(ret_reg); + __reg_bound_offset(ret_reg); + __update_reg_bounds(ret_reg); + + ret = push_stack(env, env->insn_idx + 1, env->insn_idx, false); + if (!ret) + return -EFAULT; + + *ret_reg = tmp_reg; + + /* Success case where ret is in range [0, msize_max_value]. */ + ret_reg->smin_value = 0; + ret_reg->smax_value = meta->msize_max_value; + ret_reg->umin_value = ret_reg->smin_value; + ret_reg->umax_value = ret_reg->smax_value; - ret_reg->smax_value = meta->msize_smax_value; - ret_reg->umax_value = meta->msize_umax_value; __reg_deduce_bounds(ret_reg); __reg_bound_offset(ret_reg); + __update_reg_bounds(ret_reg); + + return 0; } static int @@ -4388,7 +4408,9 @@ static int check_helper_call(struct bpf_verifier_env *env, int func_id, int insn regs[BPF_REG_0].ref_obj_id = id; } - do_refine_retval_range(regs, fn->ret_type, func_id, &meta); + err = do_refine_retval_range(env, regs, fn->ret_type, func_id, &meta); + if (err) + return err; err = check_map_func_compatibility(env, meta.map_ptr, func_id); if (err) @@ -5601,6 +5623,70 @@ static bool cmp_val_with_extended_s64(s64 sval, struct bpf_reg_state *reg) reg->smax_value <= 0 && reg->smin_value >= S32_MIN); } +/* Constrain the possible values of @reg with unsigned upper bound @bound. + * If @is_exclusive, @bound is an exclusive limit, otherwise it is inclusive. + * If @is_jmp32, @bound is a 32-bit value that only constrains the low 32 bits + * of @reg. + */ +static void set_upper_bound(struct bpf_reg_state *reg, u64 bound, bool is_jmp32, + bool is_exclusive) +{ + if (is_exclusive) { + /* There are no values for `reg` that make `reg<0` true. */ + if (bound == 0) + return; + bound--; + } + if (is_jmp32) { + /* Constrain the register's value in the tnum representation. + * For 64-bit comparisons this happens later in + * __reg_bound_offset(), but for 32-bit comparisons, we can be + * more precise than what can be derived from the updated + * numeric bounds. + */ + struct tnum t = tnum_range(0, bound); + + t.mask |= ~0xffffffffULL; /* upper half is unknown */ + reg->var_off = tnum_intersect(reg->var_off, t); + + /* Compute the 64-bit bound from the 32-bit bound. */ + bound += gen_hi_max(reg->var_off); + } + reg->umax_value = min(reg->umax_value, bound); +} + +/* Constrain the possible values of @reg with unsigned lower bound @bound. + * If @is_exclusive, @bound is an exclusive limit, otherwise it is inclusive. + * If @is_jmp32, @bound is a 32-bit value that only constrains the low 32 bits + * of @reg. + */ +static void set_lower_bound(struct bpf_reg_state *reg, u64 bound, bool is_jmp32, + bool is_exclusive) +{ + if (is_exclusive) { + /* There are no values for `reg` that make `reg>MAX` true. */ + if (bound == (is_jmp32 ? U32_MAX : U64_MAX)) + return; + bound++; + } + if (is_jmp32) { + /* Constrain the register's value in the tnum representation. + * For 64-bit comparisons this happens later in + * __reg_bound_offset(), but for 32-bit comparisons, we can be + * more precise than what can be derived from the updated + * numeric bounds. + */ + struct tnum t = tnum_range(bound, U32_MAX); + + t.mask |= ~0xffffffffULL; /* upper half is unknown */ + reg->var_off = tnum_intersect(reg->var_off, t); + + /* Compute the 64-bit bound from the 32-bit bound. */ + bound += gen_hi_min(reg->var_off); + } + reg->umin_value = max(reg->umin_value, bound); +} + /* Adjusts the register min/max values in the case that the dst_reg is the * variable register that we are working on, and src_reg is a constant or we're * simply doing a BPF_K check. @@ -5656,15 +5742,8 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg, case BPF_JGE: case BPF_JGT: { - u64 false_umax = opcode == BPF_JGT ? val : val - 1; - u64 true_umin = opcode == BPF_JGT ? val + 1 : val; - - if (is_jmp32) { - false_umax += gen_hi_max(false_reg->var_off); - true_umin += gen_hi_min(true_reg->var_off); - } - false_reg->umax_value = min(false_reg->umax_value, false_umax); - true_reg->umin_value = max(true_reg->umin_value, true_umin); + set_upper_bound(false_reg, val, is_jmp32, opcode == BPF_JGE); + set_lower_bound(true_reg, val, is_jmp32, opcode == BPF_JGT); break; } case BPF_JSGE: @@ -5685,15 +5764,8 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg, case BPF_JLE: case BPF_JLT: { - u64 false_umin = opcode == BPF_JLT ? val : val + 1; - u64 true_umax = opcode == BPF_JLT ? val - 1 : val; - - if (is_jmp32) { - false_umin += gen_hi_min(false_reg->var_off); - true_umax += gen_hi_max(true_reg->var_off); - } - false_reg->umin_value = max(false_reg->umin_value, false_umin); - true_reg->umax_value = min(true_reg->umax_value, true_umax); + set_lower_bound(false_reg, val, is_jmp32, opcode == BPF_JLE); + set_upper_bound(true_reg, val, is_jmp32, opcode == BPF_JLT); break; } case BPF_JSLE: @@ -5717,10 +5789,6 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg, /* We might have learned some bits from the bounds. */ __reg_bound_offset(false_reg); __reg_bound_offset(true_reg); - if (is_jmp32) { - __reg_bound_offset32(false_reg); - __reg_bound_offset32(true_reg); - } /* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax. @@ -5772,15 +5840,8 @@ static void reg_set_min_max_inv(struct bpf_reg_state *true_reg, case BPF_JGE: case BPF_JGT: { - u64 false_umin = opcode == BPF_JGT ? val : val + 1; - u64 true_umax = opcode == BPF_JGT ? val - 1 : val; - - if (is_jmp32) { - false_umin += gen_hi_min(false_reg->var_off); - true_umax += gen_hi_max(true_reg->var_off); - } - false_reg->umin_value = max(false_reg->umin_value, false_umin); - true_reg->umax_value = min(true_reg->umax_value, true_umax); + set_lower_bound(false_reg, val, is_jmp32, opcode == BPF_JGE); + set_upper_bound(true_reg, val, is_jmp32, opcode == BPF_JGT); break; } case BPF_JSGE: @@ -5798,15 +5859,8 @@ static void reg_set_min_max_inv(struct bpf_reg_state *true_reg, case BPF_JLE: case BPF_JLT: { - u64 false_umax = opcode == BPF_JLT ? val : val - 1; - u64 true_umin = opcode == BPF_JLT ? val + 1 : val; - - if (is_jmp32) { - false_umax += gen_hi_max(false_reg->var_off); - true_umin += gen_hi_min(true_reg->var_off); - } - false_reg->umax_value = min(false_reg->umax_value, false_umax); - true_reg->umin_value = max(true_reg->umin_value, true_umin); + set_upper_bound(false_reg, val, is_jmp32, opcode == BPF_JLE); + set_lower_bound(true_reg, val, is_jmp32, opcode == BPF_JLT); break; } case BPF_JSLE: @@ -5830,10 +5884,6 @@ static void reg_set_min_max_inv(struct bpf_reg_state *true_reg, /* We might have learned some bits from the bounds. */ __reg_bound_offset(false_reg); __reg_bound_offset(true_reg); - if (is_jmp32) { - __reg_bound_offset32(false_reg); - __reg_bound_offset32(true_reg); - } /* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax. @@ -9842,6 +9892,7 @@ static int check_attach_btf_id(struct bpf_verifier_env *env) return -EINVAL; } env->ops = bpf_verifier_ops[tgt_prog->type]; + prog->expected_attach_type = tgt_prog->expected_attach_type; } if (!tgt_prog->jited) { verbose(env, "Can attach to only JITed progs\n"); @@ -10175,6 +10226,13 @@ err_release_maps: * them now. Otherwise free_used_maps() will release them. */ release_maps(env); + + /* extension progs temporarily inherit the attach_type of their targets + for verification purposes, so set it back to zero before returning + */ + if (env->prog->type == BPF_PROG_TYPE_EXT) + env->prog->expected_attach_type = 0; + *prog = env->prog; err_unlock: if (!is_priv) |