diff options
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r-- | drivers/usb/dwc3/core.c | 11 | ||||
-rw-r--r-- | drivers/usb/dwc3/drd.c | 11 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 31 |
3 files changed, 41 insertions, 12 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 1580d51aea4f..d97da7cef867 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -275,7 +275,8 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= DWC3_DCTL_CSFTRST; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + reg &= ~DWC3_DCTL_RUN_STOP; + dwc3_gadget_dctl_write_safe(dwc, reg); /* * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit @@ -1277,10 +1278,10 @@ static void dwc3_get_properties(struct dwc3 *dwc) u8 lpm_nyet_threshold; u8 tx_de_emphasis; u8 hird_threshold; - u8 rx_thr_num_pkt_prd; - u8 rx_max_burst_prd; - u8 tx_thr_num_pkt_prd; - u8 tx_max_burst_prd; + u8 rx_thr_num_pkt_prd = 0; + u8 rx_max_burst_prd = 0; + u8 tx_thr_num_pkt_prd = 0; + u8 tx_max_burst_prd = 0; /* default to highest possible threshold */ lpm_nyet_threshold = 0xf; diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 3e1c1aacf002..0a96f44ccca7 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -568,16 +568,15 @@ int dwc3_drd_init(struct dwc3 *dwc) { int ret, irq; + if (ROLE_SWITCH && + device_property_read_bool(dwc->dev, "usb-role-switch")) + return dwc3_setup_role_switch(dwc); + dwc->edev = dwc3_get_extcon(dwc); if (IS_ERR(dwc->edev)) return PTR_ERR(dwc->edev); - if (ROLE_SWITCH && - device_property_read_bool(dwc->dev, "usb-role-switch")) { - ret = dwc3_setup_role_switch(dwc); - if (ret < 0) - return ret; - } else if (dwc->edev) { + if (dwc->edev) { dwc->edev_nb.notifier_call = dwc3_drd_notifier; ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST, &dwc->edev_nb); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index b68fe48ac579..1f0503dc96ee 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2859,6 +2859,7 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, const struct dwc3_event_depevt *event, struct dwc3_request *req, int status) { + int request_status; int ret; if (req->request.num_mapped_sgs) @@ -2879,7 +2880,35 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, req->needs_extra_trb = false; } - dwc3_gadget_giveback(dep, req, status); + /* + * The event status only reflects the status of the TRB with IOC set. + * For the requests that don't set interrupt on completion, the driver + * needs to check and return the status of the completed TRBs associated + * with the request. Use the status of the last TRB of the request. + */ + if (req->request.no_interrupt) { + struct dwc3_trb *trb; + + trb = dwc3_ep_prev_trb(dep, dep->trb_dequeue); + switch (DWC3_TRB_SIZE_TRBSTS(trb->size)) { + case DWC3_TRBSTS_MISSED_ISOC: + /* Isoc endpoint only */ + request_status = -EXDEV; + break; + case DWC3_TRB_STS_XFER_IN_PROG: + /* Applicable when End Transfer with ForceRM=0 */ + case DWC3_TRBSTS_SETUP_PENDING: + /* Control endpoint only */ + case DWC3_TRBSTS_OK: + default: + request_status = 0; + break; + } + } else { + request_status = status; + } + + dwc3_gadget_giveback(dep, req, request_status); out: return ret; |