diff options
Diffstat (limited to 'drivers/usb/core')
-rw-r--r-- | drivers/usb/core/buffer.c | 41 | ||||
-rw-r--r-- | drivers/usb/core/devio.c | 22 | ||||
-rw-r--r-- | drivers/usb/core/hcd-pci.c | 4 | ||||
-rw-r--r-- | drivers/usb/core/hcd.c | 55 | ||||
-rw-r--r-- | drivers/usb/core/hub.c | 90 | ||||
-rw-r--r-- | drivers/usb/core/hub.h | 2 | ||||
-rw-r--r-- | drivers/usb/core/port.c | 9 | ||||
-rw-r--r-- | drivers/usb/core/quirks.c | 26 | ||||
-rw-r--r-- | drivers/usb/core/sysfs.c | 21 | ||||
-rw-r--r-- | drivers/usb/core/usb-acpi.c | 65 | ||||
-rw-r--r-- | drivers/usb/core/usb.c | 76 |
11 files changed, 354 insertions, 57 deletions
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 6cf22c27f2d2..be8738750948 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -170,3 +170,44 @@ void hcd_buffer_free( } dma_free_coherent(hcd->self.sysdev, size, addr, dma); } + +void *hcd_buffer_alloc_pages(struct usb_hcd *hcd, + size_t size, gfp_t mem_flags, dma_addr_t *dma) +{ + if (size == 0) + return NULL; + + if (hcd->localmem_pool) + return gen_pool_dma_alloc_align(hcd->localmem_pool, + size, dma, PAGE_SIZE); + + /* some USB hosts just use PIO */ + if (!hcd_uses_dma(hcd)) { + *dma = DMA_MAPPING_ERROR; + return (void *)__get_free_pages(mem_flags, + get_order(size)); + } + + return dma_alloc_coherent(hcd->self.sysdev, + size, dma, mem_flags); +} + +void hcd_buffer_free_pages(struct usb_hcd *hcd, + size_t size, void *addr, dma_addr_t dma) +{ + if (!addr) + return; + + if (hcd->localmem_pool) { + gen_pool_free(hcd->localmem_pool, + (unsigned long)addr, size); + return; + } + + if (!hcd_uses_dma(hcd)) { + free_pages((unsigned long)addr, get_order(size)); + return; + } + + dma_free_coherent(hcd->self.sysdev, size, addr, dma); +} diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index d037deb95884..087ab2248855 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -173,6 +173,7 @@ static int connected(struct usb_dev_state *ps) static void dec_usb_memory_use_count(struct usb_memory *usbm, int *count) { struct usb_dev_state *ps = usbm->ps; + struct usb_hcd *hcd = bus_to_hcd(ps->dev->bus); unsigned long flags; spin_lock_irqsave(&ps->lock, flags); @@ -181,8 +182,8 @@ static void dec_usb_memory_use_count(struct usb_memory *usbm, int *count) list_del(&usbm->memlist); spin_unlock_irqrestore(&ps->lock, flags); - usb_free_coherent(ps->dev, usbm->size, usbm->mem, - usbm->dma_handle); + hcd_buffer_free_pages(hcd, usbm->size, + usbm->mem, usbm->dma_handle); usbfs_decrease_memory_usage( usbm->size + sizeof(struct usb_memory)); kfree(usbm); @@ -221,7 +222,7 @@ static int usbdev_mmap(struct file *file, struct vm_area_struct *vma) size_t size = vma->vm_end - vma->vm_start; void *mem; unsigned long flags; - dma_addr_t dma_handle; + dma_addr_t dma_handle = DMA_MAPPING_ERROR; int ret; ret = usbfs_increase_memory_usage(size + sizeof(struct usb_memory)); @@ -234,8 +235,8 @@ static int usbdev_mmap(struct file *file, struct vm_area_struct *vma) goto error_decrease_mem; } - mem = usb_alloc_coherent(ps->dev, size, GFP_USER | __GFP_NOWARN, - &dma_handle); + mem = hcd_buffer_alloc_pages(hcd, + size, GFP_USER | __GFP_NOWARN, &dma_handle); if (!mem) { ret = -ENOMEM; goto error_free_usbm; @@ -251,7 +252,14 @@ static int usbdev_mmap(struct file *file, struct vm_area_struct *vma) usbm->vma_use_count = 1; INIT_LIST_HEAD(&usbm->memlist); - if (hcd->localmem_pool || !hcd_uses_dma(hcd)) { + /* + * In DMA-unavailable cases, hcd_buffer_alloc_pages allocates + * normal pages and assigns DMA_MAPPING_ERROR to dma_handle. Check + * whether we are in such cases, and then use remap_pfn_range (or + * dma_mmap_coherent) to map normal (or DMA) pages into the user + * space, respectively. + */ + if (dma_handle == DMA_MAPPING_ERROR) { if (remap_pfn_range(vma, vma->vm_start, virt_to_phys(usbm->mem) >> PAGE_SHIFT, size, vma->vm_page_prot) < 0) { @@ -726,6 +734,7 @@ static int driver_resume(struct usb_interface *intf) return 0; } +#ifdef CONFIG_PM /* The following routines apply to the entire device, not interfaces */ void usbfs_notify_suspend(struct usb_device *udev) { @@ -744,6 +753,7 @@ void usbfs_notify_resume(struct usb_device *udev) } mutex_unlock(&usbfs_mutex); } +#endif struct usb_driver usbfs_driver = { .name = "usbfs", diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 9e26b0143a59..db16efe293e0 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -604,10 +604,10 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = { .suspend_noirq = hcd_pci_suspend_noirq, .resume_noirq = hcd_pci_resume_noirq, .resume = hcd_pci_resume, - .freeze = check_root_hub_suspended, + .freeze = hcd_pci_suspend, .freeze_noirq = check_root_hub_suspended, .thaw_noirq = NULL, - .thaw = NULL, + .thaw = hcd_pci_resume, .poweroff = hcd_pci_suspend, .poweroff_noirq = hcd_pci_suspend_noirq, .restore_noirq = hcd_pci_resume_noirq, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 39203f2ce6a1..d58098c2af10 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1688,7 +1688,6 @@ static void usb_giveback_urb_bh(unsigned long param) spin_lock_irq(&bh->lock); bh->running = true; - restart: list_replace_init(&bh->head, &local_list); spin_unlock_irq(&bh->lock); @@ -1702,10 +1701,17 @@ static void usb_giveback_urb_bh(unsigned long param) bh->completing_ep = NULL; } - /* check if there are new URBs to giveback */ + /* + * giveback new URBs next time to prevent this function + * from not exiting for a long time. + */ spin_lock_irq(&bh->lock); - if (!list_empty(&bh->head)) - goto restart; + if (!list_empty(&bh->head)) { + if (bh->high_prio) + tasklet_hi_schedule(&bh->bh); + else + tasklet_schedule(&bh->bh); + } bh->running = false; spin_unlock_irq(&bh->lock); } @@ -1730,7 +1736,7 @@ static void usb_giveback_urb_bh(unsigned long param) void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) { struct giveback_urb_bh *bh; - bool running, high_prio_bh; + bool running; /* pass status to tasklet via unlinked */ if (likely(!urb->unlinked)) @@ -1741,13 +1747,10 @@ void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) return; } - if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) { + if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) bh = &hcd->high_prio_bh; - high_prio_bh = true; - } else { + else bh = &hcd->low_prio_bh; - high_prio_bh = false; - } spin_lock(&bh->lock); list_add_tail(&urb->urb_list, &bh->head); @@ -1756,7 +1759,7 @@ void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) if (running) ; - else if (high_prio_bh) + else if (bh->high_prio) tasklet_hi_schedule(&bh->bh); else tasklet_schedule(&bh->bh); @@ -2657,6 +2660,7 @@ int usb_add_hcd(struct usb_hcd *hcd, { int retval; struct usb_device *rhdev; + struct usb_hcd *shared_hcd; if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); @@ -2795,6 +2799,7 @@ int usb_add_hcd(struct usb_hcd *hcd, /* initialize tasklets */ init_giveback_urb_bh(&hcd->high_prio_bh); + hcd->high_prio_bh.high_prio = true; init_giveback_urb_bh(&hcd->low_prio_bh); /* enable irqs just before we start the controller, @@ -2813,13 +2818,26 @@ int usb_add_hcd(struct usb_hcd *hcd, goto err_hcd_driver_start; } + /* starting here, usbcore will pay attention to the shared HCD roothub */ + shared_hcd = hcd->shared_hcd; + if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) { + retval = register_root_hub(shared_hcd); + if (retval != 0) + goto err_register_root_hub; + + if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd)) + usb_hcd_poll_rh_status(shared_hcd); + } + /* starting here, usbcore will pay attention to this root hub */ - retval = register_root_hub(hcd); - if (retval != 0) - goto err_register_root_hub; + if (!HCD_DEFER_RH_REGISTER(hcd)) { + retval = register_root_hub(hcd); + if (retval != 0) + goto err_register_root_hub; - if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) - usb_hcd_poll_rh_status(hcd); + if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) + usb_hcd_poll_rh_status(hcd); + } return retval; @@ -2862,6 +2880,7 @@ EXPORT_SYMBOL_GPL(usb_add_hcd); void usb_remove_hcd(struct usb_hcd *hcd) { struct usb_device *rhdev = hcd->self.root_hub; + bool rh_registered; dev_info(hcd->self.controller, "remove, state %x\n", hcd->state); @@ -2872,6 +2891,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) dev_dbg(hcd->self.controller, "roothub graceful disconnect\n"); spin_lock_irq (&hcd_root_hub_lock); + rh_registered = hcd->rh_registered; hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); @@ -2881,7 +2901,8 @@ void usb_remove_hcd(struct usb_hcd *hcd) cancel_work_sync(&hcd->died_work); mutex_lock(&usb_bus_idr_lock); - usb_disconnect(&rhdev); /* Sets rhdev to NULL */ + if (rh_registered) + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ mutex_unlock(&usb_bus_idr_lock); /* diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4cf0dc7f330d..238674fab7ce 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -41,8 +41,11 @@ #define USB_PRODUCT_USB5534B 0x5534 #define USB_VENDOR_CYPRESS 0x04b4 #define USB_PRODUCT_CY7C65632 0x6570 -#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 -#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02 +#define USB_VENDOR_TEXAS_INSTRUMENTS 0x0451 +#define USB_PRODUCT_TUSB8041_USB3 0x8140 +#define USB_PRODUCT_TUSB8041_USB2 0x8142 +#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND BIT(0) +#define HUB_QUIRK_DISABLE_AUTOSUSPEND BIT(1) #define USB_TP_TRANSMISSION_DELAY 40 /* ns */ #define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */ @@ -145,6 +148,10 @@ int usb_device_supports_lpm(struct usb_device *udev) if (udev->quirks & USB_QUIRK_NO_LPM) return 0; + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return 0; + /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. */ @@ -321,6 +328,10 @@ static void usb_set_lpm_parameters(struct usb_device *udev) if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER) return; + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + hub = usb_hub_to_struct_hub(udev->parent); /* It doesn't take time to transition the roothub into U0, since it * doesn't have an upstream link. @@ -2354,17 +2365,25 @@ static int usb_enumerate_device_otg(struct usb_device *udev) } } else if (desc->bLength == sizeof (struct usb_otg_descriptor)) { - /* Set a_alt_hnp_support for legacy otg device */ - err = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - USB_REQ_SET_FEATURE, 0, - USB_DEVICE_A_ALT_HNP_SUPPORT, - 0, NULL, 0, - USB_CTRL_SET_TIMEOUT); - if (err < 0) - dev_err(&udev->dev, - "set a_alt_hnp_support failed: %d\n", - err); + /* + * We are operating on a legacy OTP device + * These should be told that they are operating + * on the wrong port if we have another port that does + * support HNP + */ + if (bus->otg_port != 0) { + /* Set a_alt_hnp_support for legacy otg device */ + err = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, 0, + USB_DEVICE_A_ALT_HNP_SUPPORT, + 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + if (err < 0) + dev_err(&udev->dev, + "set a_alt_hnp_support failed: %d\n", + err); + } } } #endif @@ -2376,9 +2395,8 @@ static int usb_enumerate_device_otg(struct usb_device *udev) * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * This is only called by usb_new_device() and usb_authorize_device() - * and FIXME -- all comments that apply to them apply here wrt to - * environment. + * This is only called by usb_new_device() -- all comments that apply there + * apply here wrt to environment. * * If the device is WUSB and not authorized, we don't attempt to read * the string descriptors, as they will be errored out by the device @@ -2676,7 +2694,8 @@ out_authorized: } /* - * Return 1 if port speed is SuperSpeedPlus, 0 otherwise + * Return 1 if port speed is SuperSpeedPlus, 0 otherwise or if the + * capability couldn't be checked. * check it from the link protocol field of the current speed ID attribute. * current speed ID is got from ext port status request. Sublink speed attribute * table is returned with the hub BOS SSP device capability descriptor @@ -2686,8 +2705,12 @@ static int port_speed_is_ssp(struct usb_device *hdev, int speed_id) int ssa_count; u32 ss_attr; int i; - struct usb_ssp_cap_descriptor *ssp_cap = hdev->bos->ssp_cap; + struct usb_ssp_cap_descriptor *ssp_cap; + if (!hdev->bos) + return 0; + + ssp_cap = hdev->bos->ssp_cap; if (!ssp_cap) return 0; @@ -4089,8 +4112,15 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { int timeout, ret; - __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; - __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; + __u8 u1_mel; + __le16 u2_mel; + + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + + u1_mel = udev->bos->ss_cap->bU1devExitLat; + u2_mel = udev->bos->ss_cap->bU2DevExitLat; /* If the device says it doesn't have *any* exit latency to come out of * U1 or U2, it's probably lying. Assume it doesn't implement that link @@ -5587,6 +5617,16 @@ static const struct usb_device_id hub_id_table[] = { .idVendor = USB_VENDOR_GENESYS_LOGIC, .bInterfaceClass = USB_CLASS_HUB, .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, + .idProduct = USB_PRODUCT_TUSB8041_USB2, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, + .idProduct = USB_PRODUCT_TUSB8041_USB3, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB}, { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, @@ -5923,6 +5963,11 @@ re_enumerate_no_bos: * the reset is over (using their post_reset method). * * Return: The same as for usb_reset_and_verify_device(). + * However, if a reset is already in progress (for instance, if a + * driver doesn't have pre_reset() or post_reset() callbacks, and while + * being unbound or re-bound during the ongoing reset its disconnect() + * or probe() routine tries to perform a second, nested reset), the + * routine returns -EINPROGRESS. * * Note: * The caller must own the device lock. For example, it's safe to use @@ -5956,6 +6001,10 @@ int usb_reset_device(struct usb_device *udev) return -EISDIR; } + if (udev->reset_in_progress) + return -EINPROGRESS; + udev->reset_in_progress = 1; + port_dev = hub->ports[udev->portnum - 1]; /* @@ -6020,6 +6069,7 @@ int usb_reset_device(struct usb_device *udev) usb_autosuspend_device(udev); memalloc_noio_restore(noio_flag); + udev->reset_in_progress = 0; return ret; } EXPORT_SYMBOL_GPL(usb_reset_device); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index a8f23f8bc6ef..1c455800f7d3 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -141,7 +141,7 @@ static inline int hub_is_superspeedplus(struct usb_device *hdev) { return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS && le16_to_cpu(hdev->descriptor.bcdUSB) >= 0x0310 && - hdev->bos->ssp_cap); + hdev->bos && hdev->bos->ssp_cap); } static inline unsigned hub_power_on_good_delay(struct usb_hub *hub) diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 235a7c645503..86e8585a5512 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -295,8 +295,10 @@ static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); - if (port_dev->child) + if (port_dev->child) { usb_disable_usb2_hardware_lpm(port_dev->child); + usb_unlocked_disable_lpm(port_dev->child); + } } static const struct dev_pm_ops usb_port_pm_ops = { @@ -450,7 +452,7 @@ static int match_location(struct usb_device *peer_hdev, void *p) struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev); struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent); - if (!peer_hub) + if (!peer_hub || port_dev->connect_type == USB_PORT_NOT_USED) return 0; hcd = bus_to_hcd(hdev->bus); @@ -461,7 +463,8 @@ static int match_location(struct usb_device *peer_hdev, void *p) for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) { peer = peer_hub->ports[port1 - 1]; - if (peer && peer->location == port_dev->location) { + if (peer && peer->connect_type != USB_PORT_NOT_USED && + peer->location == port_dev->location) { link_peers_report(port_dev, peer); return 1; /* done */ } diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d5f233fa6f3b..48cda9b7a8f2 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -362,6 +362,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM }, { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM }, + /* Realforce 87U Keyboard */ + { USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -388,6 +391,15 @@ static const struct usb_device_id usb_quirk_list[] = { /* Kingston DataTraveler 3.0 */ { USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM }, + /* NVIDIA Jetson devices in Force Recovery mode */ + { USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7418), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7721), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7c18), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7e19), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7f21), .driver_info = USB_QUIRK_RESET_RESUME }, + /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, @@ -425,6 +437,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* novation SoundControl XL */ { USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Focusrite Scarlett Solo USB */ + { USB_DEVICE(0x1235, 0x8211), .driver_info = + USB_QUIRK_DISCONNECT_SUSPEND }, + /* Huawei 4G LTE module */ { USB_DEVICE(0x12d1, 0x15bb), .driver_info = USB_QUIRK_DISCONNECT_SUSPEND }, @@ -438,6 +454,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1532, 0x0116), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */ + { USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Lenovo USB-C to Ethernet Adapter RTL8153-04 */ { USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM }, @@ -511,6 +531,12 @@ static const struct usb_device_id usb_quirk_list[] = { /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, + /* Alcor Link AK9563 SC Reader used in 2022 Lenovo ThinkPads */ + { USB_DEVICE(0x2ce3, 0x9563), .driver_info = USB_QUIRK_NO_LPM }, + + /* DELL USB GEN2 */ + { USB_DEVICE(0x413c, 0xb062), .driver_info = USB_QUIRK_NO_LPM | USB_QUIRK_RESET_RESUME }, + /* VCOM device */ { USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 2f594c88d905..4a4f39c458a9 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -889,11 +889,7 @@ read_descriptors(struct file *filp, struct kobject *kobj, size_t srclen, n; int cfgno; void *src; - int retval; - retval = usb_lock_device_interruptible(udev); - if (retval < 0) - return -EINTR; /* The binary attribute begins with the device descriptor. * Following that are the raw descriptor entries for all the * configurations (config plus subsidiary descriptors). @@ -918,7 +914,6 @@ read_descriptors(struct file *filp, struct kobject *kobj, off -= srclen; } } - usb_unlock_device(udev); return count - nleft; } @@ -1195,14 +1190,24 @@ static ssize_t interface_authorized_store(struct device *dev, { struct usb_interface *intf = to_usb_interface(dev); bool val; + struct kernfs_node *kn; if (strtobool(buf, &val) != 0) return -EINVAL; - if (val) + if (val) { usb_authorize_interface(intf); - else - usb_deauthorize_interface(intf); + } else { + /* + * Prevent deadlock if another process is concurrently + * trying to unregister intf. + */ + kn = sysfs_break_active_protection(&dev->kobj, &attr->attr); + if (kn) { + usb_deauthorize_interface(intf); + sysfs_unbreak_active_protection(kn); + } + } return count; } diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index 9043d7242d67..14274b60b47b 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -37,6 +37,71 @@ bool usb_acpi_power_manageable(struct usb_device *hdev, int index) } EXPORT_SYMBOL_GPL(usb_acpi_power_manageable); +#define UUID_USB_CONTROLLER_DSM "ce2ee385-00e6-48cb-9f05-2edb927c4899" +#define USB_DSM_DISABLE_U1_U2_FOR_PORT 5 + +/** + * usb_acpi_port_lpm_incapable - check if lpm should be disabled for a port. + * @hdev: USB device belonging to the usb hub + * @index: zero based port index + * + * Some USB3 ports may not support USB3 link power management U1/U2 states + * due to different retimer setup. ACPI provides _DSM method which returns 0x01 + * if U1 and U2 states should be disabled. Evaluate _DSM with: + * Arg0: UUID = ce2ee385-00e6-48cb-9f05-2edb927c4899 + * Arg1: Revision ID = 0 + * Arg2: Function Index = 5 + * Arg3: (empty) + * + * Return 1 if USB3 port is LPM incapable, negative on error, otherwise 0 + */ + +int usb_acpi_port_lpm_incapable(struct usb_device *hdev, int index) +{ + union acpi_object *obj; + acpi_handle port_handle; + int port1 = index + 1; + guid_t guid; + int ret; + + ret = guid_parse(UUID_USB_CONTROLLER_DSM, &guid); + if (ret) + return ret; + + port_handle = usb_get_hub_port_acpi_handle(hdev, port1); + if (!port_handle) { + dev_dbg(&hdev->dev, "port-%d no acpi handle\n", port1); + return -ENODEV; + } + + if (!acpi_check_dsm(port_handle, &guid, 0, + BIT(USB_DSM_DISABLE_U1_U2_FOR_PORT))) { + dev_dbg(&hdev->dev, "port-%d no _DSM function %d\n", + port1, USB_DSM_DISABLE_U1_U2_FOR_PORT); + return -ENODEV; + } + + obj = acpi_evaluate_dsm(port_handle, &guid, 0, + USB_DSM_DISABLE_U1_U2_FOR_PORT, NULL); + + if (!obj) + return -ENODEV; + + if (obj->type != ACPI_TYPE_INTEGER) { + dev_dbg(&hdev->dev, "evaluate port-%d _DSM failed\n", port1); + ACPI_FREE(obj); + return -EINVAL; + } + + if (obj->integer.value == 0x01) + ret = 1; + + ACPI_FREE(obj); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_acpi_port_lpm_incapable); + /** * usb_acpi_set_power_state - control usb port's power via acpi power * resource diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index f16c26dc079d..502d911f71fa 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -209,6 +209,82 @@ int usb_find_common_endpoints_reverse(struct usb_host_interface *alt, EXPORT_SYMBOL_GPL(usb_find_common_endpoints_reverse); /** + * usb_find_endpoint() - Given an endpoint address, search for the endpoint's + * usb_host_endpoint structure in an interface's current altsetting. + * @intf: the interface whose current altsetting should be searched + * @ep_addr: the endpoint address (number and direction) to find + * + * Search the altsetting's list of endpoints for one with the specified address. + * + * Return: Pointer to the usb_host_endpoint if found, %NULL otherwise. + */ +static const struct usb_host_endpoint *usb_find_endpoint( + const struct usb_interface *intf, unsigned int ep_addr) +{ + int n; + const struct usb_host_endpoint *ep; + + n = intf->cur_altsetting->desc.bNumEndpoints; + ep = intf->cur_altsetting->endpoint; + for (; n > 0; (--n, ++ep)) { + if (ep->desc.bEndpointAddress == ep_addr) + return ep; + } + return NULL; +} + +/** + * usb_check_bulk_endpoints - Check whether an interface's current altsetting + * contains a set of bulk endpoints with the given addresses. + * @intf: the interface whose current altsetting should be searched + * @ep_addrs: 0-terminated array of the endpoint addresses (number and + * direction) to look for + * + * Search for endpoints with the specified addresses and check their types. + * + * Return: %true if all the endpoints are found and are bulk, %false otherwise. + */ +bool usb_check_bulk_endpoints( + const struct usb_interface *intf, const u8 *ep_addrs) +{ + const struct usb_host_endpoint *ep; + + for (; *ep_addrs; ++ep_addrs) { + ep = usb_find_endpoint(intf, *ep_addrs); + if (!ep || !usb_endpoint_xfer_bulk(&ep->desc)) + return false; + } + return true; +} +EXPORT_SYMBOL_GPL(usb_check_bulk_endpoints); + +/** + * usb_check_int_endpoints - Check whether an interface's current altsetting + * contains a set of interrupt endpoints with the given addresses. + * @intf: the interface whose current altsetting should be searched + * @ep_addrs: 0-terminated array of the endpoint addresses (number and + * direction) to look for + * + * Search for endpoints with the specified addresses and check their types. + * + * Return: %true if all the endpoints are found and are interrupt, + * %false otherwise. + */ +bool usb_check_int_endpoints( + const struct usb_interface *intf, const u8 *ep_addrs) +{ + const struct usb_host_endpoint *ep; + + for (; *ep_addrs; ++ep_addrs) { + ep = usb_find_endpoint(intf, *ep_addrs); + if (!ep || !usb_endpoint_xfer_int(&ep->desc)) + return false; + } + return true; +} +EXPORT_SYMBOL_GPL(usb_check_int_endpoints); + +/** * usb_find_alt_setting() - Given a configuration, find the alternate setting * for the given interface. * @config: the configuration to search (not necessarily the current config). |