diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/cyclades.c | 6 | ||||
-rw-r--r-- | drivers/tty/goldfish.c | 2 | ||||
-rw-r--r-- | drivers/tty/moxa.c | 4 | ||||
-rw-r--r-- | drivers/tty/pty.c | 14 | ||||
-rw-r--r-- | drivers/tty/serial/lpc32xx_hs.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/mvebu-uart.c | 25 | ||||
-rw-r--r-- | drivers/tty/tty_buffer.c | 66 | ||||
-rw-r--r-- | drivers/tty/vt/keyboard.c | 6 | ||||
-rw-r--r-- | drivers/tty/vt/vt.c | 2 |
9 files changed, 70 insertions, 57 deletions
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index 4562c8060d09..26581d2456c8 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -556,7 +556,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, } info->idle_stats.recv_idle = jiffies; } - tty_schedule_flip(port); + tty_flip_buffer_push(port); /* end of service */ cyy_writeb(info, CyRIR, save_xir & 0x3f); @@ -996,7 +996,7 @@ static void cyz_handle_rx(struct cyclades_port *info) mod_timer(&info->rx_full_timer, jiffies + 1); #endif info->idle_stats.recv_idle = jiffies; - tty_schedule_flip(&info->port); + tty_flip_buffer_push(&info->port); /* Update rx_get */ cy_writel(&buf_ctrl->rx_get, new_rx_get); @@ -1172,7 +1172,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) if (delta_count) wake_up_interruptible(&info->port.delta_msr_wait); if (special_count) - tty_schedule_flip(&info->port); + tty_flip_buffer_push(&info->port); } } diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index 9180ca5e4dcd..d6e82eb61fc2 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -151,7 +151,7 @@ static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id) address = (unsigned long)(void *)buf; goldfish_tty_rw(qtty, address, count, 0); - tty_schedule_flip(&qtty->port); + tty_flip_buffer_push(&qtty->port); return IRQ_HANDLED; } diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index 1254b39074ed..e67a1aef1fd0 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -1385,7 +1385,7 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle, if (inited && !tty_throttled(tty) && MoxaPortRxQueue(p) > 0) { /* RX */ MoxaPortReadData(p); - tty_schedule_flip(&p->port); + tty_flip_buffer_push(&p->port); } } else { clear_bit(EMPTYWAIT, &p->statusflags); @@ -1410,7 +1410,7 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle, if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */ tty_insert_flip_char(&p->port, 0, TTY_BREAK); - tty_schedule_flip(&p->port); + tty_flip_buffer_push(&p->port); } if (intr & IntrLine) diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index c6a1d8c4e689..73226e482e91 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -111,21 +111,11 @@ static void pty_unthrottle(struct tty_struct *tty) static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c) { struct tty_struct *to = tty->link; - unsigned long flags; - if (tty->stopped) + if (tty->stopped || !c) return 0; - if (c > 0) { - spin_lock_irqsave(&to->port->lock, flags); - /* Stuff the data into the input queue of the other end */ - c = tty_insert_flip_string(to->port, buf, c); - spin_unlock_irqrestore(&to->port->lock, flags); - /* And shovel */ - if (c) - tty_flip_buffer_push(to->port); - } - return c; + return tty_insert_flip_string_and_push_buffer(to->port, buf, c); } /** diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index 9a836dcac157..a03618f89c0d 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -345,7 +345,7 @@ static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id) LPC32XX_HSUART_IIR(port->membase)); port->icount.overrun++; tty_insert_flip_char(tport, 0, TTY_OVERRUN); - tty_schedule_flip(tport); + tty_flip_buffer_push(tport); } /* Data received? */ diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 13db15118cb9..2ce0d05be368 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -443,13 +443,13 @@ static void mvebu_uart_shutdown(struct uart_port *port) } } -static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) +static unsigned int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) { unsigned int d_divisor, m_divisor; u32 brdv, osamp; if (!port->uartclk) - return -EOPNOTSUPP; + return 0; /* * The baudrate is derived from the UART clock thanks to two divisors: @@ -473,7 +473,7 @@ static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) osamp &= ~OSAMP_DIVISORS_MASK; writel(osamp, port->membase + UART_OSAMP); - return 0; + return DIV_ROUND_CLOSEST(port->uartclk, d_divisor * m_divisor); } static void mvebu_uart_set_termios(struct uart_port *port, @@ -510,15 +510,11 @@ static void mvebu_uart_set_termios(struct uart_port *port, max_baud = 230400; baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud); - if (mvebu_uart_baud_rate_set(port, baud)) { - /* No clock available, baudrate cannot be changed */ - if (old) - baud = uart_get_baud_rate(port, old, NULL, - min_baud, max_baud); - } else { - tty_termios_encode_baud_rate(termios, baud, baud); - uart_update_timeout(port, termios->c_cflag, baud); - } + baud = mvebu_uart_baud_rate_set(port, baud); + + /* In case baudrate cannot be changed, report previous old value */ + if (baud == 0 && old) + baud = tty_termios_baud_rate(old); /* Only the following flag changes are supported */ if (old) { @@ -529,6 +525,11 @@ static void mvebu_uart_set_termios(struct uart_port *port, termios->c_cflag |= CS8; } + if (baud != 0) { + tty_termios_encode_baud_rate(termios, baud, baud); + uart_update_timeout(port, termios->c_cflag, baud); + } + spin_unlock_irqrestore(&port->lock, flags); } diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 47f2370ad85c..49f39c041c35 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -395,27 +395,6 @@ int __tty_insert_flip_char(struct tty_port *port, unsigned char ch, char flag) EXPORT_SYMBOL(__tty_insert_flip_char); /** - * tty_schedule_flip - push characters to ldisc - * @port: tty port to push from - * - * Takes any pending buffers and transfers their ownership to the - * ldisc side of the queue. It then schedules those characters for - * processing by the line discipline. - */ - -void tty_schedule_flip(struct tty_port *port) -{ - struct tty_bufhead *buf = &port->buf; - - /* paired w/ acquire in flush_to_ldisc(); ensures - * flush_to_ldisc() sees buffer data. - */ - smp_store_release(&buf->tail->commit, buf->tail->used); - queue_work(system_unbound_wq, &buf->work); -} -EXPORT_SYMBOL(tty_schedule_flip); - -/** * tty_prepare_flip_string - make room for characters * @port: tty port * @chars: return pointer for character write area @@ -544,6 +523,15 @@ static void flush_to_ldisc(struct work_struct *work) } +static inline void tty_flip_buffer_commit(struct tty_buffer *tail) +{ + /* + * Paired w/ acquire in flush_to_ldisc(); ensures flush_to_ldisc() sees + * buffer data. + */ + smp_store_release(&tail->commit, tail->used); +} + /** * tty_flip_buffer_push - terminal * @port: tty port to push @@ -557,11 +545,45 @@ static void flush_to_ldisc(struct work_struct *work) void tty_flip_buffer_push(struct tty_port *port) { - tty_schedule_flip(port); + struct tty_bufhead *buf = &port->buf; + + tty_flip_buffer_commit(buf->tail); + queue_work(system_unbound_wq, &buf->work); } EXPORT_SYMBOL(tty_flip_buffer_push); /** + * tty_insert_flip_string_and_push_buffer - add characters to the tty buffer and + * push + * @port: tty port + * @chars: characters + * @size: size + * + * The function combines tty_insert_flip_string() and tty_flip_buffer_push() + * with the exception of properly holding the @port->lock. + * + * To be used only internally (by pty currently). + * + * Returns: the number added. + */ +int tty_insert_flip_string_and_push_buffer(struct tty_port *port, + const unsigned char *chars, size_t size) +{ + struct tty_bufhead *buf = &port->buf; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + size = tty_insert_flip_string(port, chars, size); + if (size) + tty_flip_buffer_commit(buf->tail); + spin_unlock_irqrestore(&port->lock, flags); + + queue_work(system_unbound_wq, &buf->work); + + return size; +} + +/** * tty_buffer_init - prepare a tty buffer structure * @tty: tty to initialise * diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index b6e78fdbfdff..68643f61f6f9 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -310,7 +310,7 @@ int kbd_rate(struct kbd_repeat *rpt) static void put_queue(struct vc_data *vc, int ch) { tty_insert_flip_char(&vc->port, ch, 0); - tty_schedule_flip(&vc->port); + tty_flip_buffer_push(&vc->port); } static void puts_queue(struct vc_data *vc, char *cp) @@ -319,7 +319,7 @@ static void puts_queue(struct vc_data *vc, char *cp) tty_insert_flip_char(&vc->port, *cp, 0); cp++; } - tty_schedule_flip(&vc->port); + tty_flip_buffer_push(&vc->port); } static void applkey(struct vc_data *vc, int key, char mode) @@ -564,7 +564,7 @@ static void fn_inc_console(struct vc_data *vc) static void fn_send_intr(struct vc_data *vc) { tty_insert_flip_char(&vc->port, 0, TTY_BREAK); - tty_schedule_flip(&vc->port); + tty_flip_buffer_push(&vc->port); } static void fn_scroll_forw(struct vc_data *vc) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index c3df1660cb5c..9d9e056f94ac 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1837,7 +1837,7 @@ static void respond_string(const char *p, struct tty_port *port) tty_insert_flip_char(port, *p, 0); p++; } - tty_schedule_flip(port); + tty_flip_buffer_push(port); } static void cursor_report(struct vc_data *vc, struct tty_struct *tty) |