diff options
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/8250/8250_mtk.c | 22 | ||||
| -rw-r--r-- | drivers/tty/serial/digicolor-usart.c | 5 |
2 files changed, 15 insertions, 12 deletions
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index fb65dc601b23..de48a58460f4 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -37,6 +37,7 @@ #define MTK_UART_IER_RTSI 0x40 /* Enable RTS Modem status interrupt */ #define MTK_UART_IER_CTSI 0x80 /* Enable CTS Modem status interrupt */ +#define MTK_UART_EFR 38 /* I/O: Extended Features Register */ #define MTK_UART_EFR_EN 0x10 /* Enable enhancement feature */ #define MTK_UART_EFR_RTS 0x40 /* Enable hardware rx flow control */ #define MTK_UART_EFR_CTS 0x80 /* Enable hardware tx flow control */ @@ -53,6 +54,9 @@ #define MTK_UART_TX_TRIGGER 1 #define MTK_UART_RX_TRIGGER MTK_UART_RX_SIZE +#define MTK_UART_XON1 40 /* I/O: Xon character 1 */ +#define MTK_UART_XOFF1 42 /* I/O: Xoff character 1 */ + #ifdef CONFIG_SERIAL_8250_DMA enum dma_rx_status { DMA_RX_START = 0, @@ -169,7 +173,7 @@ static void mtk8250_dma_enable(struct uart_8250_port *up) MTK_UART_DMA_EN_RX | MTK_UART_DMA_EN_TX); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, MTK_UART_EFR, UART_EFR_ECB); serial_out(up, UART_LCR, lcr); if (dmaengine_slave_config(dma->rxchan, &dma->rxconf) != 0) @@ -232,7 +236,7 @@ static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode) int lcr = serial_in(up, UART_LCR); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, MTK_UART_EFR, UART_EFR_ECB); serial_out(up, UART_LCR, lcr); lcr = serial_in(up, UART_LCR); @@ -241,7 +245,7 @@ static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode) serial_out(up, MTK_UART_ESCAPE_DAT, MTK_UART_ESCAPE_CHAR); serial_out(up, MTK_UART_ESCAPE_EN, 0x00); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, serial_in(up, UART_EFR) & + serial_out(up, MTK_UART_EFR, serial_in(up, MTK_UART_EFR) & (~(MTK_UART_EFR_HW_FC | MTK_UART_EFR_SW_FC_MASK))); serial_out(up, UART_LCR, lcr); mtk8250_disable_intrs(up, MTK_UART_IER_XOFFI | @@ -255,8 +259,8 @@ static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode) serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /*enable hw flow control*/ - serial_out(up, UART_EFR, MTK_UART_EFR_HW_FC | - (serial_in(up, UART_EFR) & + serial_out(up, MTK_UART_EFR, MTK_UART_EFR_HW_FC | + (serial_in(up, MTK_UART_EFR) & (~(MTK_UART_EFR_HW_FC | MTK_UART_EFR_SW_FC_MASK)))); serial_out(up, UART_LCR, lcr); @@ -270,12 +274,12 @@ static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode) serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /*enable sw flow control */ - serial_out(up, UART_EFR, MTK_UART_EFR_XON1_XOFF1 | - (serial_in(up, UART_EFR) & + serial_out(up, MTK_UART_EFR, MTK_UART_EFR_XON1_XOFF1 | + (serial_in(up, MTK_UART_EFR) & (~(MTK_UART_EFR_HW_FC | MTK_UART_EFR_SW_FC_MASK)))); - serial_out(up, UART_XON1, START_CHAR(port->state->port.tty)); - serial_out(up, UART_XOFF1, STOP_CHAR(port->state->port.tty)); + serial_out(up, MTK_UART_XON1, START_CHAR(port->state->port.tty)); + serial_out(up, MTK_UART_XOFF1, STOP_CHAR(port->state->port.tty)); serial_out(up, UART_LCR, lcr); mtk8250_disable_intrs(up, MTK_UART_IER_CTSI|MTK_UART_IER_RTSI); mtk8250_enable_intrs(up, MTK_UART_IER_XOFFI); diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c index 13ac36e2da4f..c7f81aa1ce91 100644 --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -471,11 +471,10 @@ static int digicolor_uart_probe(struct platform_device *pdev) if (IS_ERR(uart_clk)) return PTR_ERR(uart_clk); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dp->port.mapbase = res->start; - dp->port.membase = devm_ioremap_resource(&pdev->dev, res); + dp->port.membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(dp->port.membase)) return PTR_ERR(dp->port.membase); + dp->port.mapbase = res->start; irq = platform_get_irq(pdev, 0); if (irq < 0) |