3 files changed, 6 insertions, 6 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 3a985e953b8e..da2373787f85 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2940,7 +2940,7 @@ enum pci_board_num_t {
 	pbn_panacom2,
 	pbn_panacom4,
 	pbn_plx_romulus,
-	pbn_endrun_2_4000000,
+	pbn_endrun_2_3906250,
 	pbn_oxsemi,
 	pbn_oxsemi_1_4000000,
 	pbn_oxsemi_2_4000000,
@@ -3468,10 +3468,10 @@ static struct pciserial_board pci_boards[] = {
 	* signal now many ports are available
 	* 2 port 952 Uart support
 	*/
-	[pbn_endrun_2_4000000] = {
+	[pbn_endrun_2_3906250] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 2,
-		.base_baud	= 4000000,
+		.base_baud	= 3906250,
 		.uart_offset	= 0x200,
 		.first_offset	= 0x1000,
 	},
@@ -4386,7 +4386,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
 	*/
 	{	PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_endrun_2_4000000 },
+		pbn_endrun_2_3906250 },
 	/*
 	 * Quatech cards. These actually have configurable clocks but for
 	 * now we just use the default.
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 3055353514e1..e0fa24f0f732 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -3311,7 +3311,7 @@ static void serial8250_console_restore(struct uart_8250_port *up)
 
 	serial8250_set_divisor(port, baud, quot, frac);
 	serial_port_out(port, UART_LCR, up->lcr);
-	serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
+	serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
 }
 
 /*
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 93cd8ad57f38..bfbca711bbf9 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1470,7 +1470,7 @@ static int imx_uart_startup(struct uart_port *port)
 	imx_uart_writel(sport, ucr1, UCR1);
 
 	ucr4 = imx_uart_readl(sport, UCR4) & ~(UCR4_OREN | UCR4_INVR);
-	if (!sport->dma_is_enabled)
+	if (!dma_is_inited)
 		ucr4 |= UCR4_OREN;
 	if (sport->inverted_rx)
 		ucr4 |= UCR4_INVR;