3 files changed, 25 insertions, 7 deletions

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 54e6c8ddef5d..0bbf34035d6a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -261,6 +261,14 @@ configured less than Maximum supported fifo bytes */
 				  UART_FCR7_64BYTE,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_RT2880] = {
+		.name		= "Palmchip BK-3103",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 4, 8, 14},
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */
@@ -2910,3 +2918,5 @@ int serial8250_console_setup(struct uart_port *port, char *options, bool probe)
 }
 
 #endif /* CONFIG_SERIAL_8250_CONSOLE */
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 5ca5cf3e9359..538ea03bc101 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2786,7 +2786,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	ret = atmel_init_gpios(port, &pdev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to initialize GPIOs.");
-		goto err;
+		goto err_clear_bit;
 	}
 
 	ret = atmel_init_port(port, pdev);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index fe3d41cc8416..d0388a071ba1 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1631,12 +1631,12 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
 	int locked = 1;
 	int retval;
 
-	retval = clk_prepare_enable(sport->clk_per);
+	retval = clk_enable(sport->clk_per);
 	if (retval)
 		return;
-	retval = clk_prepare_enable(sport->clk_ipg);
+	retval = clk_enable(sport->clk_ipg);
 	if (retval) {
-		clk_disable_unprepare(sport->clk_per);
+		clk_disable(sport->clk_per);
 		return;
 	}
 
@@ -1675,8 +1675,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
 	if (locked)
 		spin_unlock_irqrestore(&sport->port.lock, flags);
 
-	clk_disable_unprepare(sport->clk_ipg);
-	clk_disable_unprepare(sport->clk_per);
+	clk_disable(sport->clk_ipg);
+	clk_disable(sport->clk_per);
 }
 
 /*
@@ -1777,7 +1777,15 @@ imx_console_setup(struct console *co, char *options)
 
 	retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
 
-	clk_disable_unprepare(sport->clk_ipg);
+	clk_disable(sport->clk_ipg);
+	if (retval) {
+		clk_unprepare(sport->clk_ipg);
+		goto error_console;
+	}
+
+	retval = clk_prepare(sport->clk_per);
+	if (retval)
+		clk_disable_unprepare(sport->clk_ipg);
 
 error_console:
 	return retval;