diff options
Diffstat (limited to 'drivers/tty/serial/stm32-usart.c')
| -rw-r--r-- | drivers/tty/serial/stm32-usart.c | 19 |
1 files changed, 15 insertions, 4 deletions
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 50073ead5881..d8e1b0356e33 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -72,6 +72,8 @@ static void stm32_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE, *cr3 |= USART_CR3_DEM; over8 = *cr1 & USART_CR1_OVER8; + *cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK); + if (over8) rs485_deat_dedt = delay_ADE * baud * 8; else @@ -509,7 +511,7 @@ static void stm32_start_tx(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; - if (uart_circ_empty(xmit)) + if (uart_circ_empty(xmit) && !port->x_char) return; stm32_transmit_chars(port); @@ -688,13 +690,22 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, * CS8 or (CS7 + parity), 8 bits word aka [M1:M0] = 0b00 * M0 and M1 already cleared by cr1 initialization. */ - if (bits == 9) + if (bits == 9) { cr1 |= USART_CR1_M0; - else if ((bits == 7) && cfg->has_7bits_data) + } else if ((bits == 7) && cfg->has_7bits_data) { cr1 |= USART_CR1_M1; - else if (bits != 8) + } else if (bits != 8) { dev_dbg(port->dev, "Unsupported data bits config: %u bits\n" , bits); + cflag &= ~CSIZE; + cflag |= CS8; + termios->c_cflag = cflag; + bits = 8; + if (cflag & PARENB) { + bits++; + cr1 |= USART_CR1_M0; + } + } if (cflag & PARODD) cr1 |= USART_CR1_PS; |