diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_omap.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 25 |
1 files changed, 5 insertions, 20 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index c1166b45c288..b9352d3bb2ed 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -162,27 +162,10 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) static void omap_8250_mdr1_errataset(struct uart_8250_port *up, struct omap8250_priv *priv) { - u8 timeout = 255; - serial_out(up, UART_OMAP_MDR1, priv->mdr1); udelay(2); serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); - /* - * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and - * TX_FIFO_E bit is 1. - */ - while (UART_LSR_THRE != (serial_in(up, UART_LSR) & - (UART_LSR_THRE | UART_LSR_DR))) { - timeout--; - if (!timeout) { - /* Should *never* happen. we warn and carry on */ - dev_crit(up->port.dev, "Errata i202: timedout %x\n", - serial_in(up, UART_LSR)); - break; - } - udelay(1); - } } static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud, @@ -261,6 +244,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) { struct omap8250_priv *priv = up->port.private_data; struct uart_8250_dma *dma = up->dma; + u8 mcr = serial8250_in_MCR(up); if (dma && dma->tx_running) { /* @@ -277,7 +261,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_EFR, UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial8250_out_MCR(up, UART_MCR_TCRTLR); + serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR); serial_out(up, UART_FCR, up->fcr); omap8250_update_scr(up, priv); @@ -293,7 +277,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_LCR, 0); /* drop TCR + TLR access, we setup XON/XOFF later */ - serial8250_out_MCR(up, up->mcr); + serial8250_out_MCR(up, mcr); + serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -602,7 +587,6 @@ static int omap_8250_startup(struct uart_port *port) pm_runtime_get_sync(port->dev); - up->mcr = 0; serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); serial_out(up, UART_LCR, UART_LCR_WLEN8); @@ -1279,6 +1263,7 @@ static int omap8250_remove(struct platform_device *pdev) pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); + flush_work(&priv->qos_work); pm_runtime_disable(&pdev->dev); serial8250_unregister_port(priv->line); pm_qos_remove_request(&priv->pm_qos_request); |