diff options
Diffstat (limited to 'drivers/net/phy/broadcom.c')
| -rw-r--r-- | drivers/net/phy/broadcom.c | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index e86ea105c802..49fb62d02a76 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -15,6 +15,7 @@ */ #include "bcm-phy-lib.h" +#include <linux/delay.h> #include <linux/module.h> #include <linux/phy.h> #include <linux/brcmphy.h> @@ -420,6 +421,17 @@ static int bcm5482_read_status(struct phy_device *phydev) return err; } +static int bcm54810_read_mmd(struct phy_device *phydev, int devnum, u16 regnum) +{ + return -EOPNOTSUPP; +} + +static int bcm54810_write_mmd(struct phy_device *phydev, int devnum, u16 regnum, + u16 val) +{ + return -EOPNOTSUPP; +} + static int bcm5481_config_aneg(struct phy_device *phydev) { struct device_node *np = phydev->mdio.dev.of_node; @@ -462,6 +474,26 @@ static int brcm_fet_config_init(struct phy_device *phydev) if (err < 0) return err; + /* The datasheet indicates the PHY needs up to 1us to complete a reset, + * build some slack here. + */ + usleep_range(1000, 2000); + + /* The PHY requires 65 MDC clock cycles to complete a write operation + * and turnaround the line properly. + * + * We ignore -EIO here as the MDIO controller (e.g.: mdio-bcm-unimac) + * may flag the lack of turn-around as a read failure. This is + * particularly true with this combination since the MDIO controller + * only used 64 MDC cycles. This is not a critical failure in this + * specific case and it has no functional impact otherwise, so we let + * that one go through. If there is a genuine bus error, the next read + * of MII_BRCM_FET_INTREG will error out. + */ + err = phy_read(phydev, MII_BMCR); + if (err < 0 && err != -EIO) + return err; + reg = phy_read(phydev, MII_BRCM_FET_INTREG); if (reg < 0) return reg; @@ -663,6 +695,8 @@ static struct phy_driver broadcom_drivers[] = { .name = "Broadcom BCM54810", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, + .read_mmd = bcm54810_read_mmd, + .write_mmd = bcm54810_write_mmd, .config_init = bcm54xx_config_init, .config_aneg = bcm5481_config_aneg, .ack_interrupt = bcm_phy_ack_intr, |