diff options
Diffstat (limited to 'drivers/iio/addac/stx104.c')
| -rw-r--r-- | drivers/iio/addac/stx104.c | 415 |
1 files changed, 415 insertions, 0 deletions
diff --git a/drivers/iio/addac/stx104.c b/drivers/iio/addac/stx104.c new file mode 100644 index 000000000000..8237ae4263cb --- /dev/null +++ b/drivers/iio/addac/stx104.c @@ -0,0 +1,415 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IIO driver for the Apex Embedded Systems STX104 + * Copyright (C) 2016 William Breathitt Gray + */ +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/iio/iio.h> +#include <linux/iio/types.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/isa.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#define STX104_OUT_CHAN(chan) { \ + .type = IIO_VOLTAGE, \ + .channel = chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .indexed = 1, \ + .output = 1 \ +} +#define STX104_IN_CHAN(chan, diff) { \ + .type = IIO_VOLTAGE, \ + .channel = chan, \ + .channel2 = chan, \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \ + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .indexed = 1, \ + .differential = diff \ +} + +#define STX104_NUM_OUT_CHAN 2 + +#define STX104_EXTENT 16 + +static unsigned int base[max_num_isa_dev(STX104_EXTENT)]; +static unsigned int num_stx104; +module_param_hw_array(base, uint, ioport, &num_stx104, 0); +MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); + +/** + * struct stx104_reg - device register structure + * @ssr_ad: Software Strobe Register and ADC Data + * @achan: ADC Channel + * @dio: Digital I/O + * @dac: DAC Channels + * @cir_asr: Clear Interrupts and ADC Status + * @acr: ADC Control + * @pccr_fsh: Pacer Clock Control and FIFO Status MSB + * @acfg: ADC Configuration + */ +struct stx104_reg { + u16 ssr_ad; + u8 achan; + u8 dio; + u16 dac[2]; + u8 cir_asr; + u8 acr; + u8 pccr_fsh; + u8 acfg; +}; + +/** + * struct stx104_iio - IIO device private data structure + * @lock: synchronization lock to prevent I/O race conditions + * @chan_out_states: channels' output states + * @reg: I/O address offset for the device registers + */ +struct stx104_iio { + struct mutex lock; + unsigned int chan_out_states[STX104_NUM_OUT_CHAN]; + struct stx104_reg __iomem *reg; +}; + +/** + * struct stx104_gpio - GPIO device private data structure + * @chip: instance of the gpio_chip + * @lock: synchronization lock to prevent I/O race conditions + * @base: base port address of the GPIO device + * @out_state: output bits state + */ +struct stx104_gpio { + struct gpio_chip chip; + spinlock_t lock; + u8 __iomem *base; + unsigned int out_state; +}; + +static int stx104_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, long mask) +{ + struct stx104_iio *const priv = iio_priv(indio_dev); + struct stx104_reg __iomem *const reg = priv->reg; + unsigned int adc_config; + int adbu; + int gain; + + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + /* get gain configuration */ + adc_config = ioread8(®->acfg); + gain = adc_config & 0x3; + + *val = 1 << gain; + return IIO_VAL_INT; + case IIO_CHAN_INFO_RAW: + if (chan->output) { + *val = priv->chan_out_states[chan->channel]; + return IIO_VAL_INT; + } + + mutex_lock(&priv->lock); + + /* select ADC channel */ + iowrite8(chan->channel | (chan->channel << 4), ®->achan); + + /* trigger ADC sample capture by writing to the 8-bit + * Software Strobe Register and wait for completion + */ + iowrite8(0, ®->ssr_ad); + while (ioread8(®->cir_asr) & BIT(7)); + + *val = ioread16(®->ssr_ad); + + mutex_unlock(&priv->lock); + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + /* get ADC bipolar/unipolar configuration */ + adc_config = ioread8(®->acfg); + adbu = !(adc_config & BIT(2)); + + *val = -32768 * adbu; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* get ADC bipolar/unipolar and gain configuration */ + adc_config = ioread8(®->acfg); + adbu = !(adc_config & BIT(2)); + gain = adc_config & 0x3; + + *val = 5; + *val2 = 15 - adbu + gain; + return IIO_VAL_FRACTIONAL_LOG2; + } + + return -EINVAL; +} + +static int stx104_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + struct stx104_iio *const priv = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + /* Only four gain states (x1, x2, x4, x8) */ + switch (val) { + case 1: + iowrite8(0, &priv->reg->acfg); + break; + case 2: + iowrite8(1, &priv->reg->acfg); + break; + case 4: + iowrite8(2, &priv->reg->acfg); + break; + case 8: + iowrite8(3, &priv->reg->acfg); + break; + default: + return -EINVAL; + } + + return 0; + case IIO_CHAN_INFO_RAW: + if (chan->output) { + /* DAC can only accept up to a 16-bit value */ + if ((unsigned int)val > 65535) + return -EINVAL; + + mutex_lock(&priv->lock); + + priv->chan_out_states[chan->channel] = val; + iowrite16(val, &priv->reg->dac[chan->channel]); + + mutex_unlock(&priv->lock); + return 0; + } + return -EINVAL; + } + + return -EINVAL; +} + +static const struct iio_info stx104_info = { + .read_raw = stx104_read_raw, + .write_raw = stx104_write_raw +}; + +/* single-ended input channels configuration */ +static const struct iio_chan_spec stx104_channels_sing[] = { + STX104_OUT_CHAN(0), STX104_OUT_CHAN(1), + STX104_IN_CHAN(0, 0), STX104_IN_CHAN(1, 0), STX104_IN_CHAN(2, 0), + STX104_IN_CHAN(3, 0), STX104_IN_CHAN(4, 0), STX104_IN_CHAN(5, 0), + STX104_IN_CHAN(6, 0), STX104_IN_CHAN(7, 0), STX104_IN_CHAN(8, 0), + STX104_IN_CHAN(9, 0), STX104_IN_CHAN(10, 0), STX104_IN_CHAN(11, 0), + STX104_IN_CHAN(12, 0), STX104_IN_CHAN(13, 0), STX104_IN_CHAN(14, 0), + STX104_IN_CHAN(15, 0) +}; +/* differential input channels configuration */ +static const struct iio_chan_spec stx104_channels_diff[] = { + STX104_OUT_CHAN(0), STX104_OUT_CHAN(1), + STX104_IN_CHAN(0, 1), STX104_IN_CHAN(1, 1), STX104_IN_CHAN(2, 1), + STX104_IN_CHAN(3, 1), STX104_IN_CHAN(4, 1), STX104_IN_CHAN(5, 1), + STX104_IN_CHAN(6, 1), STX104_IN_CHAN(7, 1) +}; + +static int stx104_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + /* GPIO 0-3 are input only, while the rest are output only */ + if (offset < 4) + return 1; + + return 0; +} + +static int stx104_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + if (offset >= 4) + return -EINVAL; + + return 0; +} + +static int stx104_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + if (offset < 4) + return -EINVAL; + + chip->set(chip, offset, value); + return 0; +} + +static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + + if (offset >= 4) + return -EINVAL; + + return !!(ioread8(stx104gpio->base) & BIT(offset)); +} + +static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + + *bits = ioread8(stx104gpio->base); + + return 0; +} + +static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + const unsigned int mask = BIT(offset) >> 4; + unsigned long flags; + + if (offset < 4) + return; + + spin_lock_irqsave(&stx104gpio->lock, flags); + + if (value) + stx104gpio->out_state |= mask; + else + stx104gpio->out_state &= ~mask; + + iowrite8(stx104gpio->out_state, stx104gpio->base); + + spin_unlock_irqrestore(&stx104gpio->lock, flags); +} + +#define STX104_NGPIO 8 +static const char *stx104_names[STX104_NGPIO] = { + "DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3" +}; + +static void stx104_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + unsigned long flags; + + /* verify masked GPIO are output */ + if (!(*mask & 0xF0)) + return; + + *mask >>= 4; + *bits >>= 4; + + spin_lock_irqsave(&stx104gpio->lock, flags); + + stx104gpio->out_state &= ~*mask; + stx104gpio->out_state |= *mask & *bits; + iowrite8(stx104gpio->out_state, stx104gpio->base); + + spin_unlock_irqrestore(&stx104gpio->lock, flags); +} + +static int stx104_probe(struct device *dev, unsigned int id) +{ + struct iio_dev *indio_dev; + struct stx104_iio *priv; + struct stx104_gpio *stx104gpio; + int err; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + stx104gpio = devm_kzalloc(dev, sizeof(*stx104gpio), GFP_KERNEL); + if (!stx104gpio) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], STX104_EXTENT, + dev_name(dev))) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + STX104_EXTENT); + return -EBUSY; + } + + priv = iio_priv(indio_dev); + priv->reg = devm_ioport_map(dev, base[id], STX104_EXTENT); + if (!priv->reg) + return -ENOMEM; + + indio_dev->info = &stx104_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + /* determine if differential inputs */ + if (ioread8(&priv->reg->cir_asr) & BIT(5)) { + indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff); + indio_dev->channels = stx104_channels_diff; + } else { + indio_dev->num_channels = ARRAY_SIZE(stx104_channels_sing); + indio_dev->channels = stx104_channels_sing; + } + + indio_dev->name = dev_name(dev); + indio_dev->dev.parent = dev; + + mutex_init(&priv->lock); + + /* configure device for software trigger operation */ + iowrite8(0, &priv->reg->acr); + + /* initialize gain setting to x1 */ + iowrite8(0, &priv->reg->acfg); + + /* initialize DAC output to 0V */ + iowrite16(0, &priv->reg->dac[0]); + iowrite16(0, &priv->reg->dac[1]); + + stx104gpio->chip.label = dev_name(dev); + stx104gpio->chip.parent = dev; + stx104gpio->chip.owner = THIS_MODULE; + stx104gpio->chip.base = -1; + stx104gpio->chip.ngpio = STX104_NGPIO; + stx104gpio->chip.names = stx104_names; + stx104gpio->chip.get_direction = stx104_gpio_get_direction; + stx104gpio->chip.direction_input = stx104_gpio_direction_input; + stx104gpio->chip.direction_output = stx104_gpio_direction_output; + stx104gpio->chip.get = stx104_gpio_get; + stx104gpio->chip.get_multiple = stx104_gpio_get_multiple; + stx104gpio->chip.set = stx104_gpio_set; + stx104gpio->chip.set_multiple = stx104_gpio_set_multiple; + stx104gpio->base = &priv->reg->dio; + stx104gpio->out_state = 0x0; + + spin_lock_init(&stx104gpio->lock); + + err = devm_gpiochip_add_data(dev, &stx104gpio->chip, stx104gpio); + if (err) { + dev_err(dev, "GPIO registering failed (%d)\n", err); + return err; + } + + return devm_iio_device_register(dev, indio_dev); +} + +static struct isa_driver stx104_driver = { + .probe = stx104_probe, + .driver = { + .name = "stx104" + }, +}; + +module_isa_driver(stx104_driver, num_stx104); + +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); +MODULE_DESCRIPTION("Apex Embedded Systems STX104 IIO driver"); +MODULE_LICENSE("GPL v2"); |