aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc/stx104.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc/stx104.c')
-rw-r--r--drivers/iio/adc/stx104.c96
1 files changed, 68 insertions, 28 deletions
diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/adc/stx104.c
index 0662ca199eb0..49aeb76212fd 100644
--- a/drivers/iio/adc/stx104.c
+++ b/drivers/iio/adc/stx104.c
@@ -23,7 +23,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/mutex.h>
#include <linux/spinlock.h>
+#include <linux/types.h>
#define STX104_OUT_CHAN(chan) { \
.type = IIO_VOLTAGE, \
@@ -53,13 +55,37 @@ module_param_hw_array(base, uint, ioport, &num_stx104, 0);
MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
/**
+ * struct stx104_reg - device register structure
+ * @ssr_ad: Software Strobe Register and ADC Data
+ * @achan: ADC Channel
+ * @dio: Digital I/O
+ * @dac: DAC Channels
+ * @cir_asr: Clear Interrupts and ADC Status
+ * @acr: ADC Control
+ * @pccr_fsh: Pacer Clock Control and FIFO Status MSB
+ * @acfg: ADC Configuration
+ */
+struct stx104_reg {
+ u16 ssr_ad;
+ u8 achan;
+ u8 dio;
+ u16 dac[2];
+ u8 cir_asr;
+ u8 acr;
+ u8 pccr_fsh;
+ u8 acfg;
+};
+
+/**
* struct stx104_iio - IIO device private data structure
+ * @lock: synchronization lock to prevent I/O race conditions
* @chan_out_states: channels' output states
- * @base: base port address of the IIO device
+ * @reg: I/O address offset for the device registers
*/
struct stx104_iio {
+ struct mutex lock;
unsigned int chan_out_states[STX104_NUM_OUT_CHAN];
- unsigned int base;
+ struct stx104_reg __iomem *reg;
};
/**
@@ -72,7 +98,7 @@ struct stx104_iio {
struct stx104_gpio {
struct gpio_chip chip;
spinlock_t lock;
- unsigned int base;
+ u8 __iomem *base;
unsigned int out_state;
};
@@ -80,6 +106,7 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
{
struct stx104_iio *const priv = iio_priv(indio_dev);
+ struct stx104_reg __iomem *const reg = priv->reg;
unsigned int adc_config;
int adbu;
int gain;
@@ -87,7 +114,7 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
/* get gain configuration */
- adc_config = inb(priv->base + 11);
+ adc_config = ioread8(&reg->acfg);
gain = adc_config & 0x3;
*val = 1 << gain;
@@ -98,25 +125,31 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
}
+ mutex_lock(&priv->lock);
+
/* select ADC channel */
- outb(chan->channel | (chan->channel << 4), priv->base + 2);
+ iowrite8(chan->channel | (chan->channel << 4), &reg->achan);
+
+ /* trigger ADC sample capture by writing to the 8-bit
+ * Software Strobe Register and wait for completion
+ */
+ iowrite8(0, &reg->ssr_ad);
+ while (ioread8(&reg->cir_asr) & BIT(7));
- /* trigger ADC sample capture and wait for completion */
- outb(0, priv->base);
- while (inb(priv->base + 8) & BIT(7));
+ *val = ioread16(&reg->ssr_ad);
- *val = inw(priv->base);
+ mutex_unlock(&priv->lock);
return IIO_VAL_INT;
case IIO_CHAN_INFO_OFFSET:
/* get ADC bipolar/unipolar configuration */
- adc_config = inb(priv->base + 11);
+ adc_config = ioread8(&reg->acfg);
adbu = !(adc_config & BIT(2));
*val = -32768 * adbu;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/* get ADC bipolar/unipolar and gain configuration */
- adc_config = inb(priv->base + 11);
+ adc_config = ioread8(&reg->acfg);
adbu = !(adc_config & BIT(2));
gain = adc_config & 0x3;
@@ -138,16 +171,16 @@ static int stx104_write_raw(struct iio_dev *indio_dev,
/* Only four gain states (x1, x2, x4, x8) */
switch (val) {
case 1:
- outb(0, priv->base + 11);
+ iowrite8(0, &priv->reg->acfg);
break;
case 2:
- outb(1, priv->base + 11);
+ iowrite8(1, &priv->reg->acfg);
break;
case 4:
- outb(2, priv->base + 11);
+ iowrite8(2, &priv->reg->acfg);
break;
case 8:
- outb(3, priv->base + 11);
+ iowrite8(3, &priv->reg->acfg);
break;
default:
return -EINVAL;
@@ -160,9 +193,12 @@ static int stx104_write_raw(struct iio_dev *indio_dev,
if ((unsigned int)val > 65535)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->chan_out_states[chan->channel] = val;
- outw(val, priv->base + 4 + 2 * chan->channel);
+ iowrite16(val, &priv->reg->dac[chan->channel]);
+ mutex_unlock(&priv->lock);
return 0;
}
return -EINVAL;
@@ -230,7 +266,7 @@ static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset)
if (offset >= 4)
return -EINVAL;
- return !!(inb(stx104gpio->base) & BIT(offset));
+ return !!(ioread8(stx104gpio->base) & BIT(offset));
}
static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
@@ -238,7 +274,7 @@ static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
{
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
- *bits = inb(stx104gpio->base);
+ *bits = ioread8(stx104gpio->base);
return 0;
}
@@ -260,7 +296,7 @@ static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset,
else
stx104gpio->out_state &= ~mask;
- outb(stx104gpio->out_state, stx104gpio->base);
+ iowrite8(stx104gpio->out_state, stx104gpio->base);
spin_unlock_irqrestore(&stx104gpio->lock, flags);
}
@@ -287,7 +323,7 @@ static void stx104_gpio_set_multiple(struct gpio_chip *chip,
stx104gpio->out_state &= ~*mask;
stx104gpio->out_state |= *mask & *bits;
- outb(stx104gpio->out_state, stx104gpio->base);
+ iowrite8(stx104gpio->out_state, stx104gpio->base);
spin_unlock_irqrestore(&stx104gpio->lock, flags);
}
@@ -314,11 +350,16 @@ static int stx104_probe(struct device *dev, unsigned int id)
return -EBUSY;
}
+ priv = iio_priv(indio_dev);
+ priv->reg = devm_ioport_map(dev, base[id], STX104_EXTENT);
+ if (!priv->reg)
+ return -ENOMEM;
+
indio_dev->info = &stx104_info;
indio_dev->modes = INDIO_DIRECT_MODE;
/* determine if differential inputs */
- if (inb(base[id] + 8) & BIT(5)) {
+ if (ioread8(&priv->reg->cir_asr) & BIT(5)) {
indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff);
indio_dev->channels = stx104_channels_diff;
} else {
@@ -329,18 +370,17 @@ static int stx104_probe(struct device *dev, unsigned int id)
indio_dev->name = dev_name(dev);
indio_dev->dev.parent = dev;
- priv = iio_priv(indio_dev);
- priv->base = base[id];
+ mutex_init(&priv->lock);
/* configure device for software trigger operation */
- outb(0, base[id] + 9);
+ iowrite8(0, &priv->reg->acr);
/* initialize gain setting to x1 */
- outb(0, base[id] + 11);
+ iowrite8(0, &priv->reg->acfg);
/* initialize DAC output to 0V */
- outw(0, base[id] + 4);
- outw(0, base[id] + 6);
+ iowrite16(0, &priv->reg->dac[0]);
+ iowrite16(0, &priv->reg->dac[1]);
stx104gpio->chip.label = dev_name(dev);
stx104gpio->chip.parent = dev;
@@ -355,7 +395,7 @@ static int stx104_probe(struct device *dev, unsigned int id)
stx104gpio->chip.get_multiple = stx104_gpio_get_multiple;
stx104gpio->chip.set = stx104_gpio_set;
stx104gpio->chip.set_multiple = stx104_gpio_set_multiple;
- stx104gpio->base = base[id] + 3;
+ stx104gpio->base = &priv->reg->dio;
stx104gpio->out_state = 0x0;
spin_lock_init(&stx104gpio->lock);