diff options
Diffstat (limited to 'arch')
36 files changed, 199 insertions, 188 deletions
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 0d2fac98ce7d..c8b80f156ec9 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -161,6 +161,8 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ #phy-cells = <0>; @@ -168,7 +170,9 @@ }; &davinci_emac { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; + status = "okay"; }; &davinci_mdio { @@ -193,6 +197,8 @@ }; &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; /* User DIP swithes [1:8] / User LEDS [1:2] */ tca6416: gpio@21 { @@ -205,6 +211,8 @@ }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; @@ -223,6 +231,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; port1-mode = "ehci-phy"; }; @@ -231,8 +241,35 @@ }; &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_rst_pins>; + + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ + OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ + OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ + OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ + OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ + OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ + OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ + OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ + OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ + OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -300,8 +337,6 @@ }; &omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_pins>; hsusb1_pins: pinmux_hsusb1_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index 8b669e2eafec..f7b680f6c48a 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -69,6 +69,8 @@ }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; s35390a: s35390a@30 { @@ -179,6 +181,13 @@ &omap3_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index d72c042f2850..a49c2966b41e 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -57,8 +57,8 @@ }; spi0: spi@f0004000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi0_cs>; cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; }; @@ -171,8 +171,8 @@ }; spi1: spi@f8008000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi1_cs>; cs-gpios = <&pioC 25 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index d241c24f0d83..e519d2747936 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -81,8 +81,8 @@ }; spi1: spi@fc018000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi1_cs>; cs-gpios = <&pioB 21 0>; status = "okay"; }; @@ -140,7 +140,7 @@ atmel,pins = <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; - pinctrl_spi0_cs: spi0_cs_default { + pinctrl_spi1_cs: spi1_cs_default { atmel,pins = <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index f3d6aaa3a78d..bac0e49cc577 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -403,7 +403,7 @@ pinctrl_flx3_default: flx3_default { pinmux = <PIN_PD16__FLEXCOM3_IO0>, <PIN_PD17__FLEXCOM3_IO1>; - bias-disable; + bias-pull-up; }; pinctrl_flx4_default: flx4_default { diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 87bb39060e8b..ca03685f0f08 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -219,6 +219,12 @@ wm8731: wm8731@1b { compatible = "wm8731"; reg = <0x1b>; + + /* PCK0 at 12MHz */ + clocks = <&pmc PMC_TYPE_SYSTEM 8>; + clock-names = "mclk"; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; + assigned-clock-rates = <12000000>; }; }; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 0a11bacffc1f..5733e3a4ea8e 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -4188,11 +4188,11 @@ reg = <0x1d0010 0x4>; reg-names = "sysc"; ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; + <SYSC_IDLE_NO>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>; + power-domains = <&prm_vpe>; clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 30fa349f9d05..a696873dc1ab 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -286,6 +286,8 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; @@ -516,8 +518,6 @@ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; }; @@ -810,6 +810,12 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 0cdbf7b6e728..b6fc879e9dbe 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -37,7 +37,7 @@ reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-gpio"; - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_reg_sd>; regulator-always-on; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index 2a0a98fe67f0..3240c67e0c39 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -11,3 +11,18 @@ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index a604d92221a4..c757f0d7781c 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -11,3 +11,18 @@ model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index b56524cc7fe2..55b619c99e24 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -265,21 +265,6 @@ }; }; -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_2_pins>; - hsusb2_2_pins: pinmux_hsusb2_2_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ - OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ - OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ - OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ - OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ - OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ - >; - }; -}; - &uart2 { interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 23ab27fe4ee5..3923b38e798d 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -31,6 +31,8 @@ aliases { display0 = &lcd; display1 = &tv0; + /delete-property/ mmc2; + /delete-property/ mmc3; }; ldo_3v3: fixedregulator { diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 5a48abac6af4..4b554cc8fa58 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -18,7 +18,6 @@ menuconfig ARCH_EXYNOS select EXYNOS_PMU select EXYNOS_SROM select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS - select GPIOLIB select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5 select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 5c3845730dbf..0b80f8bcd304 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -314,10 +314,12 @@ void __init omap_gic_of_init(void) np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic"); gic_dist_base_addr = of_iomap(np, 0); + of_node_put(np); WARN_ON(!gic_dist_base_addr); np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer"); twd_base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!twd_base); skip_errata_init: diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi index d61f43052a34..8e9ad1e51d66 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi @@ -11,26 +11,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <761000>; @@ -71,26 +51,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <731000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi index 1e5d0ee5d541..44c23c984034 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi @@ -11,26 +11,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <731000>; @@ -76,26 +56,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <751000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <751000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <751000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <751000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <771000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts index 5751c48620ed..cadba194b149 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -437,6 +437,7 @@ "", "eMMC_RST#", /* BOOT_12 */ "eMMC_DS", /* BOOT_13 */ + "", "", /* GPIOC */ "SD_D0_B", /* GPIOC_0 */ "SD_D1_B", /* GPIOC_1 */ diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 3d8b1f4f2001..78bdbd2ccc9d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -95,26 +95,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <730000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <730000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <730000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <750000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <770000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index 8e4a0ce99790..7ea909a4c1d5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -103,12 +103,14 @@ &usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; &usbotg2 { dr_mode = "host"; + disable-over-current; status = "okay"; }; @@ -166,7 +168,7 @@ fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index b7c91bdc21dd..806ee21651d1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -139,12 +139,14 @@ &usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; &usbotg2 { dr_mode = "host"; + disable-over-current; vbus-supply = <®_usb_otg2_vbus>; status = "okay"; }; @@ -231,7 +233,7 @@ fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index d2ffd62a3bd4..942fed2eed64 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -166,12 +166,14 @@ &usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; &usbotg2 { dr_mode = "host"; + disable-over-current; vbus-supply = <®_usb_otg2_vbus>; status = "okay"; }; @@ -280,7 +282,7 @@ fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 7dfee715a2c4..d8ce217c6016 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -59,6 +59,10 @@ interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + regulators { buck1_reg: BUCK1 { regulator-name = "buck1"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index da6c942fb7f9..6d6cbd4c83b8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -263,7 +263,7 @@ ranges; sai2: sai@30020000 { - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai"; reg = <0x30020000 0x10000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SAI2_IPG>, @@ -277,7 +277,7 @@ }; sai3: sai@30030000 { - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai"; reg = <0x30030000 0x10000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SAI3_IPG>, @@ -291,7 +291,7 @@ }; sai5: sai@30050000 { - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai"; reg = <0x30050000 0x10000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SAI5_IPG>, @@ -307,7 +307,7 @@ }; sai6: sai@30060000 { - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai"; reg = <0x30060000 0x10000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SAI6_IPG>, @@ -364,7 +364,7 @@ }; sai7: sai@300b0000 { - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai"; reg = <0x300b0000 0x10000>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SAI7_IPG>, diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index aebbe2b84aa1..a143f38bc78b 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -155,7 +155,7 @@ }; clk: clock-controller { - compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + compatible = "fsl,imx8qm-clk", "fsl,scu-clk"; #clock-cells = <2>; }; diff --git a/arch/powerpc/kernel/reloc_64.S b/arch/powerpc/kernel/reloc_64.S index 02d4719bf43a..232e4549defe 100644 --- a/arch/powerpc/kernel/reloc_64.S +++ b/arch/powerpc/kernel/reloc_64.S @@ -8,8 +8,10 @@ #include <asm/ppc_asm.h> RELA = 7 -RELACOUNT = 0x6ffffff9 +RELASZ = 8 +RELAENT = 9 R_PPC64_RELATIVE = 22 +R_PPC64_UADDR64 = 43 /* * r3 = desired final address of kernel @@ -25,29 +27,38 @@ _GLOBAL(relocate) add r9,r9,r12 /* r9 has runtime addr of .rela.dyn section */ ld r10,(p_st - 0b)(r12) add r10,r10,r12 /* r10 has runtime addr of _stext */ + ld r13,(p_sym - 0b)(r12) + add r13,r13,r12 /* r13 has runtime addr of .dynsym */ /* - * Scan the dynamic section for the RELA and RELACOUNT entries. + * Scan the dynamic section for the RELA, RELASZ and RELAENT entries. */ li r7,0 li r8,0 -1: ld r6,0(r11) /* get tag */ +.Ltags: + ld r6,0(r11) /* get tag */ cmpdi r6,0 - beq 4f /* end of list */ + beq .Lend_of_list /* end of list */ cmpdi r6,RELA bne 2f ld r7,8(r11) /* get RELA pointer in r7 */ - b 3f -2: addis r6,r6,(-RELACOUNT)@ha - cmpdi r6,RELACOUNT@l + b 4f +2: cmpdi r6,RELASZ bne 3f - ld r8,8(r11) /* get RELACOUNT value in r8 */ -3: addi r11,r11,16 - b 1b -4: cmpdi r7,0 /* check we have both RELA and RELACOUNT */ + ld r8,8(r11) /* get RELASZ value in r8 */ + b 4f +3: cmpdi r6,RELAENT + bne 4f + ld r12,8(r11) /* get RELAENT value in r12 */ +4: addi r11,r11,16 + b .Ltags +.Lend_of_list: + cmpdi r7,0 /* check we have RELA, RELASZ, RELAENT */ cmpdi cr1,r8,0 - beq 6f - beq cr1,6f + beq .Lout + beq cr1,.Lout + cmpdi r12,0 + beq .Lout /* * Work out linktime address of _stext and hence the @@ -62,23 +73,39 @@ _GLOBAL(relocate) /* * Run through the list of relocations and process the - * R_PPC64_RELATIVE ones. + * R_PPC64_RELATIVE and R_PPC64_UADDR64 ones. */ + divd r8,r8,r12 /* RELASZ / RELAENT */ mtctr r8 -5: ld r0,8(9) /* ELF64_R_TYPE(reloc->r_info) */ +.Lrels: ld r0,8(r9) /* ELF64_R_TYPE(reloc->r_info) */ cmpdi r0,R_PPC64_RELATIVE - bne 6f + bne .Luaddr64 ld r6,0(r9) /* reloc->r_offset */ ld r0,16(r9) /* reloc->r_addend */ + b .Lstore +.Luaddr64: + srdi r14,r0,32 /* ELF64_R_SYM(reloc->r_info) */ + clrldi r0,r0,32 + cmpdi r0,R_PPC64_UADDR64 + bne .Lnext + ld r6,0(r9) + ld r0,16(r9) + mulli r14,r14,24 /* 24 == sizeof(elf64_sym) */ + add r14,r14,r13 /* elf64_sym[ELF64_R_SYM] */ + ld r14,8(r14) + add r0,r0,r14 +.Lstore: add r0,r0,r3 stdx r0,r7,r6 - addi r9,r9,24 - bdnz 5b - -6: blr +.Lnext: + add r9,r9,r12 + bdnz .Lrels +.Lout: + blr .balign 8 p_dyn: .8byte __dynamic_start - 0b p_rela: .8byte __rela_dyn_start - 0b +p_sym: .8byte __dynamic_symtab - 0b p_st: .8byte _stext - 0b diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 40bdefe9caa7..1a63e37f336a 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -275,9 +275,7 @@ SECTIONS . = ALIGN(8); .dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { -#ifdef CONFIG_PPC32 __dynamic_symtab = .; -#endif *(.dynsym) } .dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) } diff --git a/arch/powerpc/perf/Makefile b/arch/powerpc/perf/Makefile index 2f46e31c7612..4f53d0b97539 100644 --- a/arch/powerpc/perf/Makefile +++ b/arch/powerpc/perf/Makefile @@ -3,11 +3,11 @@ obj-y += callchain.o callchain_$(BITS).o perf_regs.o obj-$(CONFIG_COMPAT) += callchain_32.o -obj-$(CONFIG_PPC_PERF_CTRS) += core-book3s.o bhrb.o +obj-$(CONFIG_PPC_PERF_CTRS) += core-book3s.o obj64-$(CONFIG_PPC_PERF_CTRS) += ppc970-pmu.o power5-pmu.o \ power5+-pmu.o power6-pmu.o power7-pmu.o \ isa207-common.o power8-pmu.o power9-pmu.o \ - generic-compat-pmu.o power10-pmu.o + generic-compat-pmu.o power10-pmu.o bhrb.o obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o obj-$(CONFIG_PPC_POWERNV) += imc-pmu.o diff --git a/arch/powerpc/tools/relocs_check.sh b/arch/powerpc/tools/relocs_check.sh index 014e00e74d2b..63792af00417 100755 --- a/arch/powerpc/tools/relocs_check.sh +++ b/arch/powerpc/tools/relocs_check.sh @@ -39,6 +39,7 @@ $objdump -R "$vmlinux" | # R_PPC_NONE grep -F -w -v 'R_PPC64_RELATIVE R_PPC64_NONE +R_PPC64_UADDR64 R_PPC_ADDR16_LO R_PPC_ADDR16_HI R_PPC_ADDR16_HA @@ -54,9 +55,3 @@ fi num_bad=$(echo "$bad_relocs" | wc -l) echo "WARNING: $num_bad bad relocations" echo "$bad_relocs" - -# If we see this type of relocation it's an idication that -# we /may/ be using an old version of binutils. -if echo "$bad_relocs" | grep -q -F -w R_PPC64_UADDR64; then - echo "WARNING: You need at least binutils >= 2.19 to build a CONFIG_RELOCATABLE kernel" -fi diff --git a/arch/riscv/kernel/patch.c b/arch/riscv/kernel/patch.c index 0b552873a577..765004b60513 100644 --- a/arch/riscv/kernel/patch.c +++ b/arch/riscv/kernel/patch.c @@ -104,7 +104,7 @@ static int patch_text_cb(void *data) struct patch_insn *patch = data; int ret = 0; - if (atomic_inc_return(&patch->cpu_count) == 1) { + if (atomic_inc_return(&patch->cpu_count) == num_online_cpus()) { ret = patch_text_nosync(patch->addr, &patch->insn, GET_INSN_LENGTH(patch->insn)); diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index ab45a220fac4..fcbfe94903bb 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -132,10 +132,12 @@ extern void load_ucode_ap(void); void reload_early_microcode(void); extern bool get_builtin_firmware(struct cpio_data *cd, const char *name); extern bool initrd_gone; +void microcode_bsp_resume(void); #else static inline void __init load_ucode_bsp(void) { } static inline void load_ucode_ap(void) { } static inline void reload_early_microcode(void) { } +static inline void microcode_bsp_resume(void) { } static inline bool get_builtin_firmware(struct cpio_data *cd, const char *name) { return false; } #endif diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c index efb69be41ab1..150ebfb8c12e 100644 --- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -775,9 +775,9 @@ static struct subsys_interface mc_cpu_interface = { }; /** - * mc_bp_resume - Update boot CPU microcode during resume. + * microcode_bsp_resume - Update boot CPU microcode during resume. */ -static void mc_bp_resume(void) +void microcode_bsp_resume(void) { int cpu = smp_processor_id(); struct ucode_cpu_info *uci = ucode_cpu_info + cpu; @@ -789,7 +789,7 @@ static void mc_bp_resume(void) } static struct syscore_ops mc_syscore_ops = { - .resume = mc_bp_resume, + .resume = microcode_bsp_resume, }; static int mc_cpu_starting(unsigned int cpu) diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index 508c81e97ab1..f1c0befb62df 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -121,7 +121,7 @@ void __memcpy_flushcache(void *_dst, const void *_src, size_t size) /* cache copy and flush to align dest */ if (!IS_ALIGNED(dest, 8)) { - unsigned len = min_t(unsigned, size, ALIGN(dest, 8) - dest); + size_t len = min_t(size_t, size, ALIGN(dest, 8) - dest); memcpy((void *) dest, (void *) source, len); clean_cache_range((void *) dest, len); diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 5debe4ac6f81..f153e9ab8c96 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -472,7 +472,6 @@ static __init void xen_setup_pci_msi(void) xen_msi_ops.setup_msi_irqs = xen_setup_msi_irqs; } xen_msi_ops.teardown_msi_irqs = xen_pv_teardown_msi_irqs; - pci_msi_ignore_mask = 1; } else if (xen_hvm_domain()) { xen_msi_ops.setup_msi_irqs = xen_hvm_setup_msi_irqs; xen_msi_ops.teardown_msi_irqs = xen_teardown_msi_irqs; @@ -486,6 +485,11 @@ static __init void xen_setup_pci_msi(void) * in allocating the native domain and never use it. */ x86_init.irqs.create_pci_msi_domain = xen_create_pci_msi_domain; + /* + * With XEN PIRQ/Eventchannels in use PCI/MSI[-X] masking is solely + * controlled by the hypervisor. + */ + pci_msi_ignore_mask = 1; } #else /* CONFIG_PCI_MSI */ diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 736008f2fccc..732cb075d707 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -25,6 +25,7 @@ #include <asm/cpu.h> #include <asm/mmu_context.h> #include <asm/cpu_device_id.h> +#include <asm/microcode.h> #ifdef CONFIG_X86_32 __visible unsigned long saved_context_ebx; @@ -262,11 +263,18 @@ static void notrace __restore_processor_state(struct saved_context *ctxt) x86_platform.restore_sched_clock_state(); mtrr_bp_restore(); perf_restore_debug_store(); - msr_restore_context(ctxt); c = &cpu_data(smp_processor_id()); if (cpu_has(c, X86_FEATURE_MSR_IA32_FEAT_CTL)) init_ia32_feat_ctl(c); + + microcode_bsp_resume(); + + /* + * This needs to happen after the microcode has been updated upon resume + * because some of the MSRs are "emulated" in microcode. + */ + msr_restore_context(ctxt); } /* Needed by apm.c */ diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 81d7c7e8f7e9..10b79d3c74e0 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -36,24 +36,19 @@ static void rs_poll(struct timer_list *); static struct tty_driver *serial_driver; static struct tty_port serial_port; static DEFINE_TIMER(serial_timer, rs_poll); -static DEFINE_SPINLOCK(timer_lock); static int rs_open(struct tty_struct *tty, struct file * filp) { - spin_lock_bh(&timer_lock); if (tty->count == 1) mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE); - spin_unlock_bh(&timer_lock); return 0; } static void rs_close(struct tty_struct *tty, struct file * filp) { - spin_lock_bh(&timer_lock); if (tty->count == 1) del_timer_sync(&serial_timer); - spin_unlock_bh(&timer_lock); } @@ -73,8 +68,6 @@ static void rs_poll(struct timer_list *unused) int rd = 1; unsigned char c; - spin_lock(&timer_lock); - while (simc_poll(0)) { rd = simc_read(0, &c, 1); if (rd <= 0) @@ -87,7 +80,6 @@ static void rs_poll(struct timer_list *unused) tty_flip_buffer_push(port); if (rd) mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE); - spin_unlock(&timer_lock); } |