diff options
Diffstat (limited to 'arch/powerpc')
-rw-r--r-- | arch/powerpc/include/asm/reg_fsl_emb.h | 11 | ||||
-rw-r--r-- | arch/powerpc/kernel/hw_breakpoint.c | 76 | ||||
-rw-r--r-- | arch/powerpc/lib/Makefile | 2 | ||||
-rw-r--r-- | arch/powerpc/perf/hv-gpci.c | 29 | ||||
-rw-r--r-- | arch/powerpc/platforms/embedded6xx/linkstation.c | 3 | ||||
-rw-r--r-- | arch/powerpc/platforms/embedded6xx/mpc10x.h | 3 |
6 files changed, 114 insertions, 10 deletions
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h index a21f529c43d9..8359c06d92d9 100644 --- a/arch/powerpc/include/asm/reg_fsl_emb.h +++ b/arch/powerpc/include/asm/reg_fsl_emb.h @@ -12,9 +12,16 @@ #ifndef __ASSEMBLY__ /* Performance Monitor Registers */ #define mfpmr(rn) ({unsigned int rval; \ - asm volatile("mfpmr %0," __stringify(rn) \ + asm volatile(".machine push; " \ + ".machine e300; " \ + "mfpmr %0," __stringify(rn) ";" \ + ".machine pop; " \ : "=r" (rval)); rval;}) -#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v)) +#define mtpmr(rn, v) asm volatile(".machine push; " \ + ".machine e300; " \ + "mtpmr " __stringify(rn) ",%0; " \ + ".machine pop; " \ + : : "r" (v)) #endif /* __ASSEMBLY__ */ /* Freescale Book E Performance Monitor APU Registers */ diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index 6e5bed50c357..ca3374c6f374 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -504,6 +504,11 @@ static bool is_larx_stcx_instr(int type) return type == LARX || type == STCX; } +static bool is_octword_vsx_instr(int type, int size) +{ + return ((type == LOAD_VSX || type == STORE_VSX) && size == 32); +} + /* * We've failed in reliably handling the hw-breakpoint. Unregister * it and throw a warning message to let the user know about it. @@ -554,6 +559,63 @@ static bool stepping_handler(struct pt_regs *regs, struct perf_event **bp, return true; } +static void handle_p10dd1_spurious_exception(struct arch_hw_breakpoint **info, + int *hit, unsigned long ea) +{ + int i; + unsigned long hw_end_addr; + + /* + * Handle spurious exception only when any bp_per_reg is set. + * Otherwise this might be created by xmon and not actually a + * spurious exception. + */ + for (i = 0; i < nr_wp_slots(); i++) { + if (!info[i]) + continue; + + hw_end_addr = ALIGN(info[i]->address + info[i]->len, HW_BREAKPOINT_SIZE); + + /* + * Ending address of DAWR range is less than starting + * address of op. + */ + if ((hw_end_addr - 1) >= ea) + continue; + + /* + * Those addresses need to be in the same or in two + * consecutive 512B blocks; + */ + if (((hw_end_addr - 1) >> 10) != (ea >> 10)) + continue; + + /* + * 'op address + 64B' generates an address that has a + * carry into bit 52 (crosses 2K boundary). + */ + if ((ea & 0x800) == ((ea + 64) & 0x800)) + continue; + + break; + } + + if (i == nr_wp_slots()) + return; + + for (i = 0; i < nr_wp_slots(); i++) { + if (info[i]) { + hit[i] = 1; + info[i]->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ; + } + } +} + +/* + * Handle a DABR or DAWR exception. + * + * Called in atomic context. + */ int hw_breakpoint_handler(struct die_args *args) { bool err = false; @@ -612,8 +674,14 @@ int hw_breakpoint_handler(struct die_args *args) goto reset; if (!nr_hit) { - rc = NOTIFY_DONE; - goto out; + /* Workaround for Power10 DD1 */ + if (!IS_ENABLED(CONFIG_PPC_8xx) && mfspr(SPRN_PVR) == 0x800100 && + is_octword_vsx_instr(type, size)) { + handle_p10dd1_spurious_exception(info, hit, ea); + } else { + rc = NOTIFY_DONE; + goto out; + } } /* @@ -674,6 +742,8 @@ NOKPROBE_SYMBOL(hw_breakpoint_handler); /* * Handle single-step exceptions following a DABR hit. + * + * Called in atomic context. */ static int single_step_dabr_instruction(struct die_args *args) { @@ -731,6 +801,8 @@ NOKPROBE_SYMBOL(single_step_dabr_instruction); /* * Handle debug exception notifications. + * + * Called in atomic context. */ int hw_breakpoint_exceptions_notify( struct notifier_block *unused, unsigned long val, void *data) diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 321cab5c3ea0..bd5012aa94e3 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -67,6 +67,6 @@ obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o obj-$(CONFIG_FTR_FIXUP_SELFTEST) += feature-fixups-test.o obj-$(CONFIG_ALTIVEC) += xor_vmx.o xor_vmx_glue.o -CFLAGS_xor_vmx.o += -maltivec $(call cc-option,-mabi=altivec) +CFLAGS_xor_vmx.o += -mhard-float -maltivec $(call cc-option,-mabi=altivec) obj-$(CONFIG_PPC64) += $(obj64-y) diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c index 28b770bbc10b..2a054de80e50 100644 --- a/arch/powerpc/perf/hv-gpci.c +++ b/arch/powerpc/perf/hv-gpci.c @@ -164,6 +164,20 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index, ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO, virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE); + + /* + * ret value as 'H_PARAMETER' with detail_rc as 'GEN_BUF_TOO_SMALL', + * specifies that the current buffer size cannot accommodate + * all the information and a partial buffer returned. + * Since in this function we are only accessing data for a given starting index, + * we don't need to accommodate whole data and can get required count by + * accessing first entry data. + * Hence hcall fails only incase the ret value is other than H_SUCCESS or + * H_PARAMETER with detail_rc value as GEN_BUF_TOO_SMALL(0x1B). + */ + if (ret == H_PARAMETER && be32_to_cpu(arg->params.detail_rc) == 0x1B) + ret = 0; + if (ret) { pr_devel("hcall failed: 0x%lx\n", ret); goto out; @@ -228,6 +242,7 @@ static int h_gpci_event_init(struct perf_event *event) { u64 count; u8 length; + unsigned long ret; /* Not our event */ if (event->attr.type != event->pmu->type) @@ -258,13 +273,23 @@ static int h_gpci_event_init(struct perf_event *event) } /* check if the request works... */ - if (single_gpci_request(event_get_request(event), + ret = single_gpci_request(event_get_request(event), event_get_starting_index(event), event_get_secondary_index(event), event_get_counter_info_version(event), event_get_offset(event), length, - &count)) { + &count); + + /* + * ret value as H_AUTHORITY implies that partition is not permitted to retrieve + * performance information, and required to set + * "Enable Performance Information Collection" option. + */ + if (ret == H_AUTHORITY) + return -EPERM; + + if (ret) { pr_devel("gpci hcall failed\n"); return -EINVAL; } diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index f514d5d28cd4..3f3821eb4c36 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -97,9 +97,6 @@ static void __init linkstation_init_IRQ(void) mpic_init(mpic); } -extern void avr_uart_configure(void); -extern void avr_uart_send(const char); - static void __noreturn linkstation_restart(char *cmd) { local_irq_disable(); diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h index 5ad12023e562..ebc258fa4858 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc10x.h +++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h @@ -156,4 +156,7 @@ int mpc10x_disable_store_gathering(struct pci_controller *hose); /* For MPC107 boards that use the built-in openpic */ void mpc10x_set_openpic(void); +void avr_uart_configure(void); +void avr_uart_send(const char c); + #endif /* __PPC_KERNEL_MPC10X_H */ |