diff options
Diffstat (limited to 'arch/arm')
205 files changed, 1607 insertions, 787 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d89d013f586c..9b075719a7d9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -4,6 +4,7 @@ config ARM default y select ARCH_CLOCKSOURCE_DATA select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID && !KEXEC + select ARCH_HAS_CPU_FINALIZE_INIT if MMU select ARCH_HAS_DEBUG_VIRTUAL if MMU select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ELF_RANDOMIZE @@ -68,7 +69,7 @@ config ARM select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU select HAVE_EXIT_THREAD select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) - select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) + select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL && !CC_IS_CLANG) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_GCC_PLUGINS @@ -1943,7 +1944,6 @@ config CMDLINE choice prompt "Kernel command line type" if CMDLINE != "" default CMDLINE_FROM_BOOTLOADER - depends on ATAGS config CMDLINE_FROM_BOOTLOADER bool "Use bootloader kernel arguments if available" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index bee0ba1d1cfb..b931fac129a1 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -45,30 +45,42 @@ config DEBUG_WX If in doubt, say "Y". -# RMK wants arm kernels compiled with frame pointers or stack unwinding. -# If you know what you are doing and are willing to live without stack -# traces, you can get a slightly smaller kernel by setting this option to -# n, but then RMK will have to kill you ;). -config FRAME_POINTER - bool - depends on !THUMB2_KERNEL - default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER +choice + prompt "Choose kernel unwinder" + default UNWINDER_ARM if AEABI + default UNWINDER_FRAME_POINTER if !AEABI + help + This determines which method will be used for unwinding kernel stack + traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack, + livepatch, lockdep, and more. + +config UNWINDER_FRAME_POINTER + bool "Frame pointer unwinder" + depends on !THUMB2_KERNEL && !CC_IS_CLANG + select ARCH_WANT_FRAME_POINTERS + select FRAME_POINTER help - If you say N here, the resulting kernel will be slightly smaller and - faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled, - when a problem occurs with the kernel, the information that is - reported is severely limited. + This option enables the frame pointer unwinder for unwinding + kernel stack traces. -config ARM_UNWIND - bool "Enable stack unwinding support (EXPERIMENTAL)" - depends on AEABI - default y +config UNWINDER_ARM + bool "ARM EABI stack unwinder" + depends on AEABI && !FUNCTION_GRAPH_TRACER + select ARM_UNWIND help This option enables stack unwinding support in the kernel using the information automatically generated by the compiler. The resulting kernel image is slightly bigger but the performance is not affected. Currently, this feature - only works with EABI compilers. If unsure say Y. + only works with EABI compilers. + +endchoice + +config ARM_UNWIND + bool + +config FRAME_POINTER + bool config OLD_MCOUNT bool diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index 78b508075161..868eeeaaa46e 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -16,7 +16,7 @@ * size immediately following the kernel, we could build this into * a binary blob, and concatenate the zImage using the cat command. */ - .section .start,#alloc,#execinstr + .section .start, "ax" .type _start, #function .globl _start diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S index 88e2a88d324b..0e092c36da2f 100644 --- a/arch/arm/boot/compressed/big-endian.S +++ b/arch/arm/boot/compressed/big-endian.S @@ -6,7 +6,7 @@ * Author: Nicolas Pitre */ - .section ".start", #alloc, #execinstr + .section ".start", "ax" mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #(1 << 7) @ enable big endian mode diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 69e661f574a0..e4d1b3d0b7d9 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -114,7 +114,7 @@ #endif .endm - .section ".start", #alloc, #execinstr + .section ".start", "ax" /* * sort out different calling conventions */ diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S index 0284f84dcf38..27577644ee72 100644 --- a/arch/arm/boot/compressed/piggy.S +++ b/arch/arm/boot/compressed/piggy.S @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ - .section .piggydata,#alloc + .section .piggydata, "a" .globl input_data input_data: .incbin "arch/arm/boot/compressed/piggy_data" diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 572fbd254690..495c55e5b5db 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -15,22 +15,20 @@ compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"; /* Power */ - regulators { - vcc3v3: fixedregulator@1 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; + vcc3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; - vcc1v8: fixedregulator@2 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; + vcc1v8: fixedregulator2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; }; /* User IO */ diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 46e6d3ed8f35..c042c416a94a 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -74,7 +74,7 @@ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x80000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 2932a29ae272..230f6dd876a2 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -584,7 +584,7 @@ pcie1: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index cff1269f3fbf..7146cc8f082a 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -79,7 +79,7 @@ /* x1 port */ pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -98,7 +98,7 @@ /* x1 port */ pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index fde4c302f08e..320c759b4090 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -22,6 +22,12 @@ stdout-path = &uart0; }; + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + ethernet2 = ð2; + }; + memory { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1024 MB */ @@ -291,7 +297,17 @@ }; }; - /* port 6 is connected to eth0 */ + ports@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; }; @@ -307,7 +323,7 @@ marvell,function = "spi0"; }; - spi0cs1_pins: spi0cs1-pins { + spi0cs2_pins: spi0cs2-pins { marvell,pins = "mpp26"; marvell,function = "spi0"; }; @@ -342,7 +358,7 @@ }; }; - /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */ + /* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */ }; &uart0 { diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index f0022d10c715..f081f7cb66e5 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -84,7 +84,7 @@ /* x1 port */ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -103,7 +103,7 @@ /* x1 port */ pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -125,7 +125,7 @@ */ pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 929459c42760..6f32f1233282 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -163,7 +163,7 @@ }; uart0: serial@12000 { - compatible = "marvell,armada-38x-uart"; + compatible = "marvell,armada-38x-uart", "ns16550a"; reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -173,7 +173,7 @@ }; uart1: serial@12100 { - compatible = "marvell,armada-38x-uart"; + compatible = "marvell,armada-38x-uart", "ns16550a"; reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index f0c949831efb..f589112e7697 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -456,7 +456,7 @@ /* x1 port */ pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -475,7 +475,7 @@ /* x1 port */ pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -497,7 +497,7 @@ */ pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 8558bf6bb54c..d55fe162fc7f 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -97,7 +97,7 @@ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -115,7 +115,7 @@ pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -133,7 +133,7 @@ pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -151,7 +151,7 @@ pcie5: pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 2d85fe8ac327..fdcc81819940 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -112,7 +112,7 @@ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -130,7 +130,7 @@ pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -148,7 +148,7 @@ pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -166,7 +166,7 @@ pcie5: pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -184,7 +184,7 @@ pcie6: pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -202,7 +202,7 @@ pcie7: pcie@7,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; reg = <0x3800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -220,7 +220,7 @@ pcie8: pcie@8,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -238,7 +238,7 @@ pcie9: pcie@9,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 2375449c02d0..10626452878a 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -5,7 +5,7 @@ / { model = "AST2500 EVB"; - compatible = "aspeed,ast2500"; + compatible = "aspeed,ast2500-evb", "aspeed,ast2500"; aliases { serial4 = &uart5; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index ec1f17ab6753..0b990761d80a 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -39,6 +39,13 @@ }; + usb1 { + pinctrl_usb1_vbus_gpio: usb1_vbus_gpio { + atmel,pins = + <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PC5 GPIO */ + }; + }; + mmc0_slot1 { pinctrl_board_mmc0_slot1: mmc0_slot1-board { atmel,pins = @@ -84,6 +91,8 @@ }; usb1: gadget@fffa4000 { + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + pinctrl-names = "default"; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 31ff602e2cd3..6bac18d7c070 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -48,18 +48,17 @@ "GPIO18", "NC", /* GPIO19 */ "NC", /* GPIO20 */ - "GPIO21", + "CAM_GPIO0", "GPIO22", "GPIO23", "GPIO24", "GPIO25", "NC", /* GPIO26 */ - "CAM_GPIO0", - /* Binary number representing build/revision */ - "CONFIG0", - "CONFIG1", - "CONFIG2", - "CONFIG3", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", "NC", /* GPIO32 */ "NC", /* GPIO33 */ "NC", /* GPIO34 */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 9f7145b1cc5e..3509582f92f1 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -77,16 +77,18 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", "CAM_GPIO1", /* GPIO40 */ "WL_ON", /* GPIO41 */ "NC", /* GPIO42 */ diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index beb6c502dadc..bcad098a7fcc 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -38,12 +38,26 @@ #size-cells = <0>; enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit + /* Source for d/i-cache-line-size and d/i-cache-sets + * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system + * /about-the-l1-memory-system?lang=en + * + * Source for d/i-cache-size + * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks + */ cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000d8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; }; cpu1: cpu@1 { @@ -52,6 +66,13 @@ reg = <1>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000e0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; }; cpu2: cpu@2 { @@ -60,6 +81,13 @@ reg = <2>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000e8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; }; cpu3: cpu@3 { @@ -68,6 +96,27 @@ reg = <3>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000f0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; + }; + + /* Source for cache-line-size + cache-sets + * https://developer.arm.com/documentation/ddi0500 + * /e/level-2-memory-system/about-the-l2-memory-system?lang=en + * Source for cache-size + * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf + */ + l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set + cache-level = <2>; }; }; }; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts index 74c83b0ca54e..bb7dc00a71e0 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -48,3 +48,16 @@ }; }; }; + +&gmac0 { + phy-mode = "rgmii"; + phy-handle = <&bcm54210e>; + + mdio { + /delete-node/ switch@1e; + + bcm54210e: ethernet-phy@0 { + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts index 214df18f3a75..6561e3b81b60 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -85,3 +85,16 @@ }; }; }; + +&gmac0 { + phy-mode = "rgmii"; + phy-handle = <&bcm54210e>; + + mdio { + /delete-node/ switch@1e; + + bcm54210e: ethernet-phy@0 { + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 6edc4bd1e7ea..c331217ce21b 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -260,7 +260,7 @@ interrupt-parent = <&gic>; - ehci: ehci@21000 { + ehci: usb@21000 { #usb-cells = <0>; compatible = "generic-ehci"; @@ -282,7 +282,7 @@ }; }; - ohci: ohci@22000 { + ohci: usb@22000 { #usb-cells = <0>; compatible = "generic-ohci"; @@ -468,7 +468,6 @@ "spi_lr_session_done", "spi_lr_overread"; clocks = <&iprocmed>; - clock-names = "iprocmed"; num-cs = <2>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 453a2a37dabd..e44694800052 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -127,6 +127,9 @@ pcie0: pcie@2000 { reg = <0x00002000 0x1000>; + + #address-cells = <3>; + #size-cells = <2>; }; usb2: usb2@4000 { @@ -135,7 +138,7 @@ #address-cells = <1>; #size-cells = <1>; - ehci: ehci@4000 { + ehci: usb@4000 { compatible = "generic-ehci"; reg = <0x4000 0x1000>; interrupt-parent = <&gic>; @@ -155,9 +158,7 @@ }; }; - ohci: ohci@d000 { - #usb-cells = <0>; - + ohci: usb@d000 { compatible = "generic-ohci"; reg = <0xd000 0x1000>; interrupt-parent = <&gic>; @@ -180,6 +181,24 @@ gmac0: ethernet@5000 { reg = <0x5000 0x1000>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch: switch@1e { + compatible = "brcm,bcm53125"; + reg = <0x1e>; + + status = "disabled"; + + /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; gmac1: ethernet@b000 { diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts index ef263412fea5..02c916bedd28 100644 --- a/arch/arm/boot/dts/bcm947189acdbmr.dts +++ b/arch/arm/boot/dts/bcm947189acdbmr.dts @@ -61,9 +61,9 @@ spi { compatible = "spi-gpio"; num-chipselects = <1>; - gpio-sck = <&chipcommon 21 0>; - gpio-miso = <&chipcommon 22 0>; - gpio-mosi = <&chipcommon 23 0>; + sck-gpios = <&chipcommon 21 0>; + miso-gpios = <&chipcommon 22 0>; + mosi-gpios = <&chipcommon 23 0>; cs-gpios = <&chipcommon 24 0>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 250ad0535e8c..c677d1a74a90 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -129,7 +129,7 @@ pcie1: pcie@2 { device_type = "pci"; status = "disabled"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x80000 0 0x2000>; reg = <0x1000 0 0 0 0>; clocks = <&gate_clk 5>; marvell,pcie-port = <1>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 29df4cfa9165..e398604b2ce0 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -237,7 +237,7 @@ i80-if-timings { cs-setup = <0>; wr-setup = <0>; - wr-act = <1>; + wr-active = <1>; wr-hold = <0>; }; }; diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi index 021d9fc1b492..27a1a8952665 100644 --- a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi @@ -10,7 +10,7 @@ / { thermal-zones { cpu_thermal: cpu-thermal { - thermal-sensors = <&tmu 0>; + thermal-sensors = <&tmu>; polling-delay-passive = <0>; polling-delay = <0>; trips { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 6085e92ac2d7..3f7488833745 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -611,7 +611,7 @@ status = "disabled"; hdmi_i2c_phy: hdmiphy@38 { - compatible = "exynos4210-hdmiphy"; + compatible = "samsung,exynos4210-hdmiphy"; reg = <0x38>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index 0dedeba89b5f..d2350561b051 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -184,7 +184,7 @@ compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clock-names = "mclk"; wlf,shared-lrclk; #sound-dai-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 60fbad25b5f2..93c8918e599b 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -525,7 +525,7 @@ clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; - gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { is_s5k6a3_ep: endpoint { diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 346f71932457..e5bfa76185a2 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -87,7 +87,7 @@ }; &ehci { - samsung,vbus-gpio = <&gpx3 5 1>; + samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>; status = "okay"; port@1 { diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d31a68672bfa..d7d756614edd 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -260,7 +260,7 @@ }; uart3_data: uart3-data { - samsung,pins = "gpa1-4", "gpa1-4"; + samsung,pins = "gpa1-4", "gpa1-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 594b246afbed..95a93ef80d97 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -116,6 +116,9 @@ status = "okay"; ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; }; &i2c_0 { @@ -124,7 +127,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@50 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x50>; }; @@ -283,7 +286,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@51 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 840a854ee838..8a7c98f8d4eb 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -113,7 +113,6 @@ }; &cpu0_thermal { - thermal-sensors = <&tmu_cpu0 0>; polling-delay-passive = <0>; polling-delay = <0>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 831c7336f237..660a9ad05c9b 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -131,6 +131,9 @@ hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; + vdd-supply = <&ldo6_reg>; + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; }; &hsi2c_4 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index aaff15880761..99e2e0b0b9cd 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -530,7 +530,7 @@ }; mipi_phy: mipi-video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; + compatible = "samsung,exynos5420-mipi-video-phy"; syscon = <&pmu_system_controller>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index aca27aa2d44b..8ed52ecc965f 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -79,7 +79,6 @@ MX23_PAD_LCD_RESET__GPIO_1_18 MX23_PAD_PWM3__GPIO_1_29 MX23_PAD_PWM4__GPIO_1_30 - MX23_PAD_SSP1_DETECT__SSP1_DETECT >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index f346673d34ea..0cb5f01f02d1 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -462,7 +462,7 @@ scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9547"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index f0607eb41df4..079f77c7e0f0 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -81,6 +81,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 0193ee6fe964..a28dce3c6457 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -158,6 +158,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; + ranges = <0 0x00900000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 05f07ea3e8c8..ed783c91b002 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -313,6 +313,8 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; @@ -540,8 +542,6 @@ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; }; @@ -807,6 +807,12 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index b5986efe1090..143d249b821e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -463,7 +463,6 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi index f0be516dc28e..9181fbeb833d 100644 --- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -226,7 +226,7 @@ reg = <0x28>; #gpio-cells = <2>; gpio-controller; - ngpio = <32>; + ngpios = <62>; }; sgtl5000: codec@a { diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 4cc9858f7ff8..ef63ea5873ed 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -5,6 +5,8 @@ * Author: Fabio Estevam <fabio.estevam@freescale.com> */ +#include <dt-bindings/gpio/gpio.h> + / { aliases { backlight = &backlight; @@ -210,6 +212,7 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 >; }; @@ -276,7 +279,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - non-removable; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 9f88b5691f05..b6aac90d1233 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -46,6 +46,10 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg; + usb1 = &usbh1; + usb2 = &usbh2; + usb3 = &usbh3; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -561,7 +565,7 @@ status = "disabled"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -753,7 +757,7 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-enable-ramp-delay = <150>; + regulator-enable-ramp-delay = <380>; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index d91f92f944c5..3633383db706 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -9,12 +9,18 @@ ocram2: sram@940000 { compatible = "mmio-sram"; reg = <0x00940000 0x20000>; + ranges = <0 0x00940000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; ocram3: sram@960000 { compatible = "mmio-sram"; reg = <0x00960000 0x20000>; + ranges = <0 0x00960000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 9d19183f40e1..e9f6cffc7eee 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -32,6 +32,9 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -118,6 +121,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SL_CLK_OCRAM>; }; @@ -368,7 +374,7 @@ clock-names = "ipg", "per"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6sl-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 7c7d5c47578e..9f0c82d79a36 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -36,6 +36,8 @@ spi1 = &ecspi2; spi3 = &ecspi3; spi4 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -49,20 +51,18 @@ device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; - operating-points = < + operating-points = /* kHz uV */ - 996000 1275000 - 792000 1175000 - 396000 1075000 - 198000 975000 - >; - fsl,soc-operating-points = < + <996000 1275000>, + <792000 1175000>, + <396000 1075000>, + <198000 975000>; + fsl,soc-operating-points = /* ARM kHz SOC-PU uV */ - 996000 1175000 - 792000 1175000 - 396000 1175000 - 198000 1175000 - >; + <996000 1175000>, + <792000 1175000>, + <396000 1175000>, + <198000 1175000>; clock-latency = <61036>; /* two CLK32 periods */ clocks = <&clks IMX6SLL_CLK_ARM>, <&clks IMX6SLL_CLK_PLL2_PFD2>, @@ -131,6 +131,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; L2: l2-cache@a02000 { @@ -268,7 +271,7 @@ status = "disabled"; }; - ssi1: ssi-controller@2028000 { + ssi1: ssi@2028000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -281,7 +284,7 @@ status = "disabled"; }; - ssi2: ssi-controller@202c000 { + ssi2: ssi@202c000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; @@ -294,7 +297,7 @@ status = "disabled"; }; - ssi3: ssi-controller@2030000 { + ssi3: ssi@2030000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -515,7 +518,7 @@ reg = <0x020ca000 0x1000>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SLL_CLK_USBPHY2>; - phy-reg_3p0-supply = <®_3p0>; + phy-3p0-supply = <®_3p0>; fsl,anatop = <&anatop>; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index ae0728df542e..4cabcf32af06 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -49,6 +49,9 @@ spi2 = &ecspi3; spi3 = &ecspi4; spi4 = &ecspi5; + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -167,12 +170,18 @@ ocram_s: sram@8f8000 { compatible = "mmio-sram"; reg = <0x008f8000 0x4000>; + ranges = <0 0x008f8000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SX_CLK_OCRAM_S>; }; ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SX_CLK_OCRAM>; }; @@ -459,7 +468,7 @@ status = "disabled"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index adecd6e08468..7c3d8acf87be 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -47,6 +47,8 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -61,20 +63,18 @@ reg = <0>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; - operating-points = < + operating-points = /* kHz uV */ - 696000 1275000 - 528000 1175000 - 396000 1025000 - 198000 950000 - >; - fsl,soc-operating-points = < + <696000 1275000>, + <528000 1175000>, + <396000 1025000>, + <198000 950000>; + fsl,soc-operating-points = /* KHz uV */ - 696000 1275000 - 528000 1175000 - 396000 1175000 - 198000 1175000 - >; + <696000 1275000>, + <528000 1175000>, + <396000 1175000>, + <198000 1175000>; clocks = <&clks IMX6UL_CLK_ARM>, <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_PLL2_PFD2>, @@ -169,6 +169,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; dma_apbh: dma-apbh@1804000 { @@ -420,7 +423,7 @@ status = "disabled"; }; - gpt1: gpt@2098000 { + gpt1: timer@2098000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -693,7 +696,7 @@ reg = <0x020e4000 0x4000>; }; - gpt2: gpt@20e8000 { + gpt2: timer@20e8000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x020e8000 0x4000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; @@ -939,7 +942,7 @@ }; lcdif: lcdif@21c8000 { - compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif"; reg = <0x021c8000 0x4000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, @@ -952,7 +955,7 @@ qspi: qspi@21e0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; + compatible = "fsl,imx6ul-qspi"; reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 6c63a7384611..4219239f0b58 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -37,7 +37,7 @@ reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-gpio"; - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_reg_sd>; regulator-always-on; diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h index 3c12a6fb0b61..1aea67f8ac23 100644 --- a/arch/arm/boot/dts/imx6ull-pinfunc.h +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h @@ -68,6 +68,6 @@ #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0 -#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0 0x0200 0x048C 0x0000 0x9 0x0 #endif /* __DTS_IMX6ULL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 317f1bcc56e2..bd2c3c8f4ebb 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -163,12 +163,7 @@ interrupt-parent = <&gpio2>; interrupts = <29 0>; pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; - ti,x-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <0>; - ti,y-min = /bits/ 16 <0>; - ti,y-max = /bits/ 16 <0>; - ti,pressure-max = /bits/ 16 <0>; - ti,x-plate-ohms = /bits/ 16 <400>; + touchscreen-max-pressure = <255>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 7234e8330a57..34904f7eeb13 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -7,6 +7,12 @@ #include <dt-bindings/reset/imx7-reset.h> / { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; + }; + cpus { cpu0: cpu@0 { clock-frequency = <996000000>; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 7eaf96b425be..36c00fe29f4f 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -46,6 +46,8 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbh; }; cpus { @@ -437,8 +439,8 @@ fsl,input-sel = <&iomuxc>; }; - gpt1: gpt@302d0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + gpt1: timer@302d0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x302d0000 0x10000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_GPT1_ROOT_CLK>, @@ -446,8 +448,8 @@ clock-names = "ipg", "per"; }; - gpt2: gpt@302e0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + gpt2: timer@302e0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x302e0000 0x10000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_GPT2_ROOT_CLK>, @@ -456,8 +458,8 @@ status = "disabled"; }; - gpt3: gpt@302f0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + gpt3: timer@302f0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x302f0000 0x10000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_GPT3_ROOT_CLK>, @@ -466,8 +468,8 @@ status = "disabled"; }; - gpt4: gpt@30300000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + gpt4: timer@30300000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x30300000 0x10000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_GPT4_ROOT_CLK>, diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 94d2ff9836d0..e6c5a99e0741 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -155,6 +155,7 @@ pci: pciv3@62000000 { compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 7b151acb9984..88b70ba1c8fe 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -10,6 +10,11 @@ ocp@f1000000 { pinctrl: pin-controller@10000 { + /* Non-default UART pins */ + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp4", "mpp5"; + }; + pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo"; @@ -213,22 +218,11 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - ethphy1: ethernet-phy@8 { reg = <8>; }; }; -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - ð1 { status = "okay"; ethernet1-port@0 { diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index 32d0dc371fc3..4cd72b5e612b 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -15,3 +15,18 @@ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index 24283739526c..2aca9111c699 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -15,3 +15,18 @@ model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index c5d54c4d3747..499eea86e102 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -269,21 +269,6 @@ }; }; -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_2_pins>; - hsusb2_2_pins: pinmux_hsusb2_2_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ - OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ - OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ - OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ - OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ - OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ - >; - }; -}; - &uart2 { interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index a86b89086334..2486feb5323b 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -91,14 +91,14 @@ }; uart_A: serial@84c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x84c0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_B: serial@84dc { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x84dc 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -136,7 +136,7 @@ }; uart_C: serial@8700 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x8700 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -219,7 +219,7 @@ }; uart_AO: serial@4c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart"; reg = <0x4c0 0x18>; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; status = "disabled"; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index 75de8134b1d1..e479bfe681bd 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -165,12 +165,12 @@ regulator-enable-ramp-delay = <1000>; }; - /* Used by DSS */ + /* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */ vcsi: VCSI { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-enable-ramp-delay = <1000>; - regulator-boot-on; + regulator-always-on; }; vdac: VDAC { diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts index 4a962a26482d..59d8775a3a93 100644 --- a/arch/arm/boot/dts/moxart-uc7112lx.dts +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -80,7 +80,7 @@ clocks = <&ref12>; }; -&sdhci { +&mmc { status = "okay"; }; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi index da7b3237bfe9..804a2bc6ec82 100644 --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -93,8 +93,8 @@ clock-names = "PCLK"; }; - sdhci: sdhci@98e00000 { - compatible = "moxa,moxart-sdhci"; + mmc: mmc@98e00000 { + compatible = "moxa,moxart-mmc"; reg = <0x98e00000 0x5C>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_apb>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index a5aed92ab54b..820bdd5326ab 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -29,6 +29,8 @@ aliases { display0 = &lcd; display1 = &tv0; + /delete-property/ mmc2; + /delete-property/ mmc3; }; /* fixed 26MHz oscillator */ diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 67d77eee9433..91c8a05ab67a 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -647,12 +647,12 @@ /* Configure pwm clock source for timers 8 & 9 */ &timer8 { assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; + assigned-clock-parents = <&sys_32k_ck>; }; &timer9 { assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; + assigned-clock-parents = <&sys_32k_ck>; }; /* @@ -669,6 +669,7 @@ &uart3 { interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0x17c>; + overrun-throttle-ms = <500>; }; &uart4 { diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index f7dddfb01f81..d629caf8b98f 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -286,7 +286,7 @@ clocks = <&armclk>; }; - gic: gic@1000 { + gic: interrupt-controller@1000 { compatible = "arm,arm11mp-gic"; interrupt-controller; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 00daa844bf8c..38c4a0c80063 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -794,7 +794,7 @@ xoadc: xoadc@197 { compatible = "qcom,pm8921-adc"; - reg = <197>; + reg = <0x197>; interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>; #address-cells = <2>; #size-cells = <0>; @@ -1604,7 +1604,7 @@ }; etb@1a01000 { - compatible = "coresight-etb10", "arm,primecell"; + compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x1a01000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 8328ad589e2b..cb90e7645d08 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -135,7 +135,8 @@ clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; - clock-frequency = <32768>; + clock-frequency = <32000>; + clock-output-names = "gcc_sleep_clk_src"; #clock-cells = <0>; }; @@ -386,8 +387,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, - <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; + ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>, + <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index c852b69229c9..26d49f35331b 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -82,14 +82,12 @@ }; }; - regulators { - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - regulator-always-on; - }; + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; }; soc: soc { diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 1733d8f40ab1..b256fda0f5ea 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -140,7 +140,9 @@ reg = <0x108000 0x1000>; qcom,ipc = <&l2cc 0x8 2>; - interrupts = <0 19 0>, <0 21 0>, <0 22 0>; + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; regulators { @@ -186,7 +188,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; - interrupts = <0 154 0x0>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -312,7 +314,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x16080000 0x1000>; - interrupts = <0 147 0>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <24000000>; cs-gpios = <&msmgpio 8 0>; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 2fd59c440903..c73e5b149ac5 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -25,6 +25,7 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 2a7e6624efb9..ea23ba98625e 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -31,7 +31,7 @@ &i2c1 { status = "okay"; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 4a2890618f6f..720d0136f1ab 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -67,7 +67,7 @@ #sound-dai-cells = <0>; }; - ir_recv: gpio-ir-receiver { + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 3b7cae6f4127..24efc9b31d89 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -509,7 +509,6 @@ &global_timer { interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; - status = "disabled"; }; &local_timer { diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 6592c809e2a5..ccc07740ee3d 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -53,7 +53,7 @@ vin-supply = <&vcc_sys>; }; - hym8563@51 { + rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index a6ff7eac4aa8..8970b7ad1a6b 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -233,7 +233,7 @@ vin-supply = <&vcc_sys>; }; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 504ab1177aa7..ec7c7bf5ae95 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -146,7 +146,7 @@ vin-supply = <&vcc_sys>; }; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 6a30cadad88a..47dd843ae629 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -166,7 +166,7 @@ }; &i2c0 { - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 2ff81f3736c8..4de88ded6d9a 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -924,7 +924,7 @@ status = "disabled"; }; - spdif: sound@ff88b0000 { + spdif: sound@ff8b0000 { compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; reg = <0x0 0xff8b0000 0x0 0x10000>; #sound-dai-cells = <0>; @@ -957,7 +957,7 @@ status = "disabled"; }; - crypto: cypto-controller@ff8a0000 { + crypto: crypto@ff8a0000 { compatible = "rockchip,rk3288-crypto"; reg = <0x0 0xff8a0000 0x0 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -1172,6 +1172,7 @@ clock-names = "dp", "pclk"; phys = <&edp_phy>; phy-names = "dp"; + power-domains = <&power RK3288_PD_VIO>; resets = <&cru SRST_EDP>; reset-names = "dp"; rockchip,grf = <&grf>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 86a0d98d28ff..1b6429843bd4 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -108,6 +108,13 @@ reg = <0x1013c200 0x20>; interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cru CORE_PERI>; + status = "disabled"; + /* The clock source and the sched_clock provided by the arm_global_timer + * on Rockchip rk3066a/rk3188 are quite unstable because their rates + * depend on the CPU frequency. + * Keep the arm_global_timer disabled in order to have the + * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default. + */ }; local_timer: local-timer@1013c600 { diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 1aeac33b0d34..0b07b3c31960 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -28,29 +28,21 @@ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - fin_pll: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; + fin_pll: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-output-names = "xusbxti"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; }; - srom-cs1@18000000 { + srom-cs1-bus@18000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -59,7 +51,7 @@ ethernet@18000000 { compatible = "davicom,dm9000"; - reg = <0x18000000 0x2 0x18000004 0x2>; + reg = <0x18000000 0x2>, <0x18000004 0x2>; interrupt-parent = <&gpn>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; davicom,no-eeprom; @@ -201,12 +193,12 @@ }; &pinctrl0 { - gpio_leds: gpio-leds { + gpio_leds: gpio-leds-pins { samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7"; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - gpio_keys: gpio-keys { + gpio_keys: gpio-keys-pins { samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3", "gpn-4", "gpn-5", "gpl-11", "gpl-12"; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi index 8e9594d64b57..0a3186d57cb5 100644 --- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi +++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi @@ -16,111 +16,111 @@ * Pin banks */ - gpa: gpa { + gpa: gpa-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpb: gpb { + gpb: gpb-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpc: gpc { + gpc: gpc-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpd: gpd { + gpd: gpd-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpe: gpe { + gpe: gpe-gpio-bank { gpio-controller; #gpio-cells = <2>; }; - gpf: gpf { + gpf: gpf-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpg: gpg { + gpg: gpg-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gph: gph { + gph: gph-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpi: gpi { + gpi: gpi-gpio-bank { gpio-controller; #gpio-cells = <2>; }; - gpj: gpj { + gpj: gpj-gpio-bank { gpio-controller; #gpio-cells = <2>; }; - gpk: gpk { + gpk: gpk-gpio-bank { gpio-controller; #gpio-cells = <2>; }; - gpl: gpl { + gpl: gpl-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpm: gpm { + gpm: gpm-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpn: gpn { + gpn: gpn-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpo: gpo { + gpo: gpo-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpp: gpp { + gpp: gpp-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpq: gpq { + gpq: gpq-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -131,225 +131,225 @@ * Pin groups */ - uart0_data: uart0-data { + uart0_data: uart0-data-pins { samsung,pins = "gpa-0", "gpa-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - uart0_fctl: uart0-fctl { + uart0_fctl: uart0-fctl-pins { samsung,pins = "gpa-2", "gpa-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - uart1_data: uart1-data { + uart1_data: uart1-data-pins { samsung,pins = "gpa-4", "gpa-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - uart1_fctl: uart1-fctl { + uart1_fctl: uart1-fctl-pins { samsung,pins = "gpa-6", "gpa-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - uart2_data: uart2-data { + uart2_data: uart2-data-pins { samsung,pins = "gpb-0", "gpb-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - uart3_data: uart3-data { + uart3_data: uart3-data-pins { samsung,pins = "gpb-2", "gpb-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - ext_dma_0: ext-dma-0 { + ext_dma_0: ext-dma-0-pins { samsung,pins = "gpb-0", "gpb-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - ext_dma_1: ext-dma-1 { + ext_dma_1: ext-dma-1-pins { samsung,pins = "gpb-2", "gpb-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - irda_data_0: irda-data-0 { + irda_data_0: irda-data-0-pins { samsung,pins = "gpb-0", "gpb-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - irda_data_1: irda-data-1 { + irda_data_1: irda-data-1-pins { samsung,pins = "gpb-2", "gpb-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - irda_sdbw: irda-sdbw { + irda_sdbw: irda-sdbw-pins { samsung,pins = "gpb-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2c0_bus: i2c0-bus { + i2c0_bus: i2c0-bus-pins { samsung,pins = "gpb-5", "gpb-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - i2c1_bus: i2c1-bus { + i2c1_bus: i2c1-bus-pins { /* S3C6410-only */ samsung,pins = "gpb-2", "gpb-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_6>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - spi0_bus: spi0-bus { + spi0_bus: spi0-bus-pins { samsung,pins = "gpc-0", "gpc-1", "gpc-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - spi0_cs: spi0-cs { + spi0_cs: spi0-cs-pins { samsung,pins = "gpc-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - spi1_bus: spi1-bus { + spi1_bus: spi1-bus-pins { samsung,pins = "gpc-4", "gpc-5", "gpc-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - spi1_cs: spi1-cs { + spi1_cs: spi1-cs-pins { samsung,pins = "gpc-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd0_cmd: sd0-cmd { + sd0_cmd: sd0-cmd-pins { samsung,pins = "gpg-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd0_clk: sd0-clk { + sd0_clk: sd0-clk-pins { samsung,pins = "gpg-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd0_bus1: sd0-bus1 { + sd0_bus1: sd0-bus1-pins { samsung,pins = "gpg-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd0_bus4: sd0-bus4 { + sd0_bus4: sd0-bus4-pins { samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd0_cd: sd0-cd { + sd0_cd: sd0-cd-pins { samsung,pins = "gpg-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - sd1_cmd: sd1-cmd { + sd1_cmd: sd1-cmd-pins { samsung,pins = "gph-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd1_clk: sd1-clk { + sd1_clk: sd1-clk-pins { samsung,pins = "gph-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd1_bus1: sd1-bus1 { + sd1_bus1: sd1-bus1-pins { samsung,pins = "gph-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd1_bus4: sd1-bus4 { + sd1_bus4: sd1-bus4-pins { samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd1_bus8: sd1-bus8 { + sd1_bus8: sd1-bus8-pins { samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5", "gph-6", "gph-7", "gph-8", "gph-9"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd1_cd: sd1-cd { + sd1_cd: sd1-cd-pins { samsung,pins = "gpg-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - sd2_cmd: sd2-cmd { + sd2_cmd: sd2-cmd-pins { samsung,pins = "gpc-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd2_clk: sd2-clk { + sd2_clk: sd2-clk-pins { samsung,pins = "gpc-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd2_bus1: sd2-bus1 { + sd2_bus1: sd2-bus1-pins { samsung,pins = "gph-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd2_bus4: sd2-bus4 { + sd2_bus4: sd2-bus4-pins { samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s0_bus: i2s0-bus { + i2s0_bus: i2s0-bus-pins { samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s0_cdclk: i2s0-cdclk { + i2s0_cdclk: i2s0-cdclk-pins { samsung,pins = "gpd-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s1_bus: i2s1-bus { + i2s1_bus: i2s1-bus-pins { samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s1_cdclk: i2s1-cdclk { + i2s1_cdclk: i2s1-cdclk-pins { samsung,pins = "gpe-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s2_bus: i2s2-bus { + i2s2_bus: i2s2-bus-pins { /* S3C6410-only */ samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6", "gph-8", "gph-9"; @@ -357,50 +357,50 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s2_cdclk: i2s2-cdclk { + i2s2_cdclk: i2s2-cdclk-pins { /* S3C6410-only */ samsung,pins = "gph-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_5>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pcm0_bus: pcm0-bus { + pcm0_bus: pcm0-bus-pins { samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pcm0_extclk: pcm0-extclk { + pcm0_extclk: pcm0-extclk-pins { samsung,pins = "gpd-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pcm1_bus: pcm1-bus { + pcm1_bus: pcm1-bus-pins { samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pcm1_extclk: pcm1-extclk { + pcm1_extclk: pcm1-extclk-pins { samsung,pins = "gpe-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - ac97_bus_0: ac97-bus-0 { + ac97_bus_0: ac97-bus-0-pins { samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - ac97_bus_1: ac97-bus-1 { + ac97_bus_1: ac97-bus-1-pins { samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - cam_port: cam-port { + cam_port: cam-port-pins { samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4", "gpf-5", "gpf-6", "gpf-7", "gpf-8", "gpf-9", "gpf-10", "gpf-11", "gpf-12"; @@ -408,242 +408,242 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - cam_rst: cam-rst { + cam_rst: cam-rst-pins { samsung,pins = "gpf-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - cam_field: cam-field { + cam_field: cam-field-pins { /* S3C6410-only */ samsung,pins = "gpb-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pwm_extclk: pwm-extclk { + pwm_extclk: pwm-extclk-pins { samsung,pins = "gpf-13"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pwm0_out: pwm0-out { + pwm0_out: pwm0-out-pins { samsung,pins = "gpf-14"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pwm1_out: pwm1-out { + pwm1_out: pwm1-out-pins { samsung,pins = "gpf-15"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - clkout0: clkout-0 { + clkout0: clkout-0-pins { samsung,pins = "gpf-14"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col0_0: keypad-col0-0 { + keypad_col0_0: keypad-col0-0-pins { samsung,pins = "gph-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col1_0: keypad-col1-0 { + keypad_col1_0: keypad-col1-0-pins { samsung,pins = "gph-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col2_0: keypad-col2-0 { + keypad_col2_0: keypad-col2-0-pins { samsung,pins = "gph-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col3_0: keypad-col3-0 { + keypad_col3_0: keypad-col3-0-pins { samsung,pins = "gph-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col4_0: keypad-col4-0 { + keypad_col4_0: keypad-col4-0-pins { samsung,pins = "gph-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col5_0: keypad-col5-0 { + keypad_col5_0: keypad-col5-0-pins { samsung,pins = "gph-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col6_0: keypad-col6-0 { + keypad_col6_0: keypad-col6-0-pins { samsung,pins = "gph-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col7_0: keypad-col7-0 { + keypad_col7_0: keypad-col7-0-pins { samsung,pins = "gph-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col0_1: keypad-col0-1 { + keypad_col0_1: keypad-col0-1-pins { samsung,pins = "gpl-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col1_1: keypad-col1-1 { + keypad_col1_1: keypad-col1-1-pins { samsung,pins = "gpl-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col2_1: keypad-col2-1 { + keypad_col2_1: keypad-col2-1-pins { samsung,pins = "gpl-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col3_1: keypad-col3-1 { + keypad_col3_1: keypad-col3-1-pins { samsung,pins = "gpl-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col4_1: keypad-col4-1 { + keypad_col4_1: keypad-col4-1-pins { samsung,pins = "gpl-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col5_1: keypad-col5-1 { + keypad_col5_1: keypad-col5-1-pins { samsung,pins = "gpl-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col6_1: keypad-col6-1 { + keypad_col6_1: keypad-col6-1-pins { samsung,pins = "gpl-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col7_1: keypad-col7-1 { + keypad_col7_1: keypad-col7-1-pins { samsung,pins = "gpl-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row0_0: keypad-row0-0 { + keypad_row0_0: keypad-row0-0-pins { samsung,pins = "gpk-8"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row1_0: keypad-row1-0 { + keypad_row1_0: keypad-row1-0-pins { samsung,pins = "gpk-9"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row2_0: keypad-row2-0 { + keypad_row2_0: keypad-row2-0-pins { samsung,pins = "gpk-10"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row3_0: keypad-row3-0 { + keypad_row3_0: keypad-row3-0-pins { samsung,pins = "gpk-11"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row4_0: keypad-row4-0 { + keypad_row4_0: keypad-row4-0-pins { samsung,pins = "gpk-12"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row5_0: keypad-row5-0 { + keypad_row5_0: keypad-row5-0-pins { samsung,pins = "gpk-13"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row6_0: keypad-row6-0 { + keypad_row6_0: keypad-row6-0-pins { samsung,pins = "gpk-14"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row7_0: keypad-row7-0 { + keypad_row7_0: keypad-row7-0-pins { samsung,pins = "gpk-15"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row0_1: keypad-row0-1 { + keypad_row0_1: keypad-row0-1-pins { samsung,pins = "gpn-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row1_1: keypad-row1-1 { + keypad_row1_1: keypad-row1-1-pins { samsung,pins = "gpn-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row2_1: keypad-row2-1 { + keypad_row2_1: keypad-row2-1-pins { samsung,pins = "gpn-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row3_1: keypad-row3-1 { + keypad_row3_1: keypad-row3-1-pins { samsung,pins = "gpn-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row4_1: keypad-row4-1 { + keypad_row4_1: keypad-row4-1-pins { samsung,pins = "gpn-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row5_1: keypad-row5-1 { + keypad_row5_1: keypad-row5-1-pins { samsung,pins = "gpn-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row6_1: keypad-row6-1 { + keypad_row6_1: keypad-row6-1-pins { samsung,pins = "gpn-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row7_1: keypad-row7-1 { + keypad_row7_1: keypad-row7-1-pins { samsung,pins = "gpn-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - lcd_ctrl: lcd-ctrl { + lcd_ctrl: lcd-ctrl-pins { samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - lcd_data16: lcd-data-width16 { + lcd_data16: lcd-data-width16-pins { samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6", "gpi-7", "gpi-10", "gpi-11", "gpi-12", "gpi-13", "gpi-14", "gpi-15", "gpj-3", @@ -652,7 +652,7 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - lcd_data18: lcd-data-width18 { + lcd_data18: lcd-data-width18-pins { samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5", "gpi-6", "gpi-7", "gpi-10", "gpi-11", "gpi-12", "gpi-13", "gpi-14", "gpi-15", @@ -662,7 +662,7 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - lcd_data24: lcd-data-width24 { + lcd_data24: lcd-data-width24-pins { samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3", "gpi-4", "gpi-5", "gpi-6", "gpi-7", "gpi-8", "gpi-9", "gpi-10", "gpi-11", @@ -673,7 +673,7 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - hsi_bus: hsi-bus { + hsi_bus: hsi-bus-pins { samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3", "gpk-4", "gpk-5", "gpk-6", "gpk-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index 84b38f185199..53a841ecf7a4 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -15,6 +15,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "s5pv210.dtsi" @@ -31,11 +32,18 @@ reg = <0x20000000 0x40000000>; }; - ethernet@18000000 { + pmic_ap_clk: clock-0 { + /* Workaround for missing PMIC and its clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + ethernet@a8000000 { compatible = "davicom,dm9000"; - reg = <0xA8000000 0x2 0xA8000002 0x2>; + reg = <0xa8000000 0x2>, <0xa8000002 0x2>; interrupt-parent = <&gph1>; - interrupts = <1 4>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; local-mac-address = [00 00 de ad be ef]; davicom,no-eeprom; }; @@ -47,6 +55,14 @@ default-brightness-level = <6>; pinctrl-names = "default"; pinctrl-0 = <&pwm3_out>; + power-supply = <&dc5v_reg>; + }; + + dc5v_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "DC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; @@ -147,6 +163,8 @@ &rtc { status = "okay"; + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &sdhci0 { diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 020a864623ff..781ddfdc5f87 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -560,7 +560,7 @@ interrupts = <29>; clocks = <&clocks CLK_CSIS>, <&clocks SCLK_CSIS>; - clock-names = "clk_csis", + clock-names = "csis", "sclk_csis"; bus-width = <4>; status = "disabled"; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index d856c16d0015..79696d4f4f65 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1125,7 +1125,7 @@ pmecc: ecc-engine@f8014070 { compatible = "atmel,sama5d2-pmecc"; reg = <0xf8014070 0x490>, - <0xf8014500 0x100>; + <0xf8014500 0x200>; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts index beb2fc6b9eb6..adfdc43ac052 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts @@ -23,7 +23,7 @@ flash0: n25q00@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00aa"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index aac4feea86f3..09ffa79240c8 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -131,7 +131,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 155829f9eba1..907d8aa6d9fc 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -136,7 +136,7 @@ flash0: n25q00@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; /* chip select */ spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index a4a555c19d94..fe5fe4559969 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -181,7 +181,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index 53bf99eef66d..0992cae3e60e 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -87,7 +87,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts index 8860dd2e242c..22bfef024913 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts @@ -128,7 +128,7 @@ flash0: n25q512a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q512a"; + compatible = "micron,n25q512a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index f50b19447de6..3412eb17a158 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -249,7 +249,7 @@ n25q128@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128"; + compatible = "micron,n25q128", "jedec,spi-nor"; reg = <0>; /* chip select */ spi-max-frequency = <100000000>; m25p,fast-read; @@ -266,7 +266,7 @@ n25q00@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <1>; /* chip select */ spi-max-frequency = <100000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index d4dbc4098653..cf1139973bda 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -142,9 +142,9 @@ reg = <0xb4100000 0x1000>; interrupts = <0 105 0x4>; status = "disabled"; - dmas = <&dwdma0 12 0 1>, - <&dwdma0 13 1 0>; - dma-names = "tx", "rx"; + dmas = <&dwdma0 13 0 1>, + <&dwdma0 12 1 0>; + dma-names = "rx", "tx"; }; thermal@e07008c4 { diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 086b4b333249..06eb7245d93e 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -290,9 +290,9 @@ #size-cells = <0>; interrupts = <0 31 0x4>; status = "disabled"; - dmas = <&dwdma0 4 0 0>, - <&dwdma0 5 0 0>; - dma-names = "tx", "rx"; + dmas = <&dwdma0 5 0 0>, + <&dwdma0 4 0 0>; + dma-names = "rx", "tx"; }; rtc@e0580000 { diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 0d0da1f65f0e..1e54748799a6 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -248,7 +248,7 @@ irq-trigger = <0x1>; stmpegpio: stmpe-gpio { - compatible = "stmpe,gpio"; + compatible = "st,stmpe-gpio"; reg = <0>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 00166eb9be86..ca07e73e1f27 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -53,7 +53,7 @@ compatible = "arm,pl110", "arm,primecell"; reg = <0xfc200000 0x1000>; interrupt-parent = <&vic1>; - interrupts = <12>; + interrupts = <13>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index 9314128df185..639a6b65749f 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -284,6 +284,88 @@ slew-rate = <2>; }; }; + + can1_pins_a: can1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_b: can1-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_c: can1-2 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can1_pins_d: can1-3 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can2_pins_a: can2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can2_pins_b: can2-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can3_pins_a: can3-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; + + can3_pins_b: can3-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 4, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 4278a4b22860..7c5b2727ba2e 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -413,7 +413,7 @@ compatible = "st,stm32-cec"; reg = <0x40016000 0x400>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CEC_K>, <&clk_lse>; + clocks = <&rcc CEC_K>, <&rcc CEC>; clock-names = "cec", "hdmi-cec"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 84cd9c061227..afc94dbc0752 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -170,7 +170,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l1606e", "winbond,w25q128"; + compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 394a6b4dc69d..69cb65d86c46 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -183,8 +183,8 @@ }; conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "ate", - "cdev1", "cdev2", "dap1", "dtb", "gma", - "gmb", "gmc", "gmd", "gme", "gpu7", + "cdev1", "cdev2", "dap1", "dtb", "dtf", + "gma", "gmb", "gmc", "gmd", "gme", "gpu7", "gpv", "i2cp", "irrx", "irtx", "pta", "rm", "slxa", "slxk", "spia", "spib", "uac"; @@ -203,7 +203,7 @@ }; conf_crtp { nvidia,pins = "crtp", "dap2", "dap3", "dap4", - "dtc", "dte", "dtf", "gpu", "sdio1", + "dtc", "dte", "gpu", "sdio1", "slxc", "slxd", "spdi", "spdo", "spig", "uda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index e5b4a7570a01..13a75a87d571 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -118,6 +118,7 @@ reg = <0x2c0f0000 0x1000>; interrupts = <0 84 4>; cache-level = <2>; + cache-unified; }; pmu { diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 1935b580f0e8..c7fa0c0ff447 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -110,6 +110,16 @@ .endm #endif +#if __LINUX_ARM_ARCH__ < 7 + .macro dsb, args + mcr p15, 0, r0, c7, c10, 4 + .endm + + .macro isb, args + mcr p15, 0, r0, c7, c5, 4 + .endm +#endif + .macro asm_trace_hardirqs_off, save=1 #if defined(CONFIG_TRACE_IRQFLAGS) .if \save diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h index 73a99c72a930..21b6f742b3ba 100644 --- a/arch/arm/include/asm/bugs.h +++ b/arch/arm/include/asm/bugs.h @@ -1,6 +1,4 @@ /* - * arch/arm/include/asm/bugs.h - * * Copyright (C) 1995-2003 Russell King * * This program is free software; you can redistribute it and/or modify @@ -13,10 +11,8 @@ extern void check_writebuffer_bugs(void); #ifdef CONFIG_MMU -extern void check_bugs(void); extern void check_other_bugs(void); #else -#define check_bugs() do { } while (0) #define check_other_bugs() do { } while (0) #endif diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h index 58e039a851af..3c82975d46db 100644 --- a/arch/arm/include/asm/exception.h +++ b/arch/arm/include/asm/exception.h @@ -10,10 +10,6 @@ #include <linux/interrupt.h> -#ifdef CONFIG_FUNCTION_GRAPH_TRACER #define __exception_irq_entry __irq_entry -#else -#define __exception_irq_entry -#endif #endif /* __ASM_ARM_EXCEPTION_H */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index ae073fceb3f0..db20534912cd 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -26,6 +26,7 @@ #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> #include <asm/fpstate.h> +#include <asm/spectre.h> #include <kvm/arm_arch_timer.h> #define __KVM_HAVE_ARCH_INTC_INITIALIZED @@ -367,4 +368,10 @@ void kvm_arch_free_vm(struct kvm *kvm); #define kvm_arm_vcpu_loaded(vcpu) (false) +static inline int kvm_arm_get_spectre_bhb_state(void) +{ + /* 32bit guests don't need firmware for this */ + return SPECTRE_VULNERABLE; /* aka SMCCC_RET_NOT_SUPPORTED */ +} + #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 4f9dec489931..c5d27140834e 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -21,7 +21,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs); #define perf_arch_fetch_caller_regs(regs, __ip) { \ (regs)->ARM_pc = (__ip); \ - (regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \ + frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \ (regs)->ARM_sp = current_stack_pointer; \ (regs)->ARM_cpsr = SVC_MODE; \ } diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h index a0d726a47c8a..e7ca798513c1 100644 --- a/arch/arm/include/asm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -55,12 +55,6 @@ typedef pte_t *pte_addr_t; /* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(0)) - -/* * Mark the prot value as uncacheable and unbufferable. */ #define pgprot_noncached(prot) (prot) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index a757401129f9..fdc3bc07061f 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -13,6 +13,15 @@ #include <linux/const.h> #include <asm/proc-fns.h> +#ifndef __ASSEMBLY__ +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern struct page *empty_zero_page; +#define ZERO_PAGE(vaddr) (empty_zero_page) +#endif + #ifndef CONFIG_MMU #include <asm-generic/4level-fixup.h> @@ -166,13 +175,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, #define __S111 __PAGE_SHARED_EXEC #ifndef __ASSEMBLY__ -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern struct page *empty_zero_page; -#define ZERO_PAGE(vaddr) (empty_zero_page) - extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index c7cdbb43ae7c..15e850aeaecb 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -167,5 +167,31 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs) ((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1; \ }) + +/* + * Update ITSTATE after normal execution of an IT block instruction. + * + * The 8 IT state bits are split into two parts in CPSR: + * ITSTATE<1:0> are in CPSR<26:25> + * ITSTATE<7:2> are in CPSR<15:10> + */ +static inline unsigned long it_advance(unsigned long cpsr) +{ + if ((cpsr & 0x06000400) == 0) { + /* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */ + cpsr &= ~PSR_IT_MASK; + } else { + /* We need to shift left ITSTATE<4:0> */ + const unsigned long mask = 0x06001c00; /* Mask ITSTATE<4:0> */ + unsigned long it = cpsr & mask; + it <<= 1; + it |= it >> (27 - 10); /* Carry ITSTATE<2> to correct place */ + it &= mask; + cpsr &= ~mask; + cpsr |= it; + } + return cpsr; +} + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/spectre.h b/arch/arm/include/asm/spectre.h new file mode 100644 index 000000000000..85f9e538fb32 --- /dev/null +++ b/arch/arm/include/asm/spectre.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __ASM_SPECTRE_H +#define __ASM_SPECTRE_H + +enum { + SPECTRE_UNAFFECTED, + SPECTRE_MITIGATED, + SPECTRE_VULNERABLE, +}; + +enum { + __SPECTRE_V2_METHOD_BPIALL, + __SPECTRE_V2_METHOD_ICIALLU, + __SPECTRE_V2_METHOD_SMC, + __SPECTRE_V2_METHOD_HVC, + __SPECTRE_V2_METHOD_LOOP8, +}; + +enum { + SPECTRE_V2_METHOD_BPIALL = BIT(__SPECTRE_V2_METHOD_BPIALL), + SPECTRE_V2_METHOD_ICIALLU = BIT(__SPECTRE_V2_METHOD_ICIALLU), + SPECTRE_V2_METHOD_SMC = BIT(__SPECTRE_V2_METHOD_SMC), + SPECTRE_V2_METHOD_HVC = BIT(__SPECTRE_V2_METHOD_HVC), + SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8), +}; + +#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES +void spectre_v2_update_state(unsigned int state, unsigned int methods); +#else +static inline void spectre_v2_update_state(unsigned int state, + unsigned int methods) +{} +#endif + +int spectre_bhb_update_vectors(unsigned int method); + +#endif diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index f6fcc67ef06e..c06d38f0df8e 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -14,5 +14,6 @@ typedef unsigned long cycles_t; #define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) +#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback()) #endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 8b679e2ca3c3..dc31426cae6d 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -106,4 +106,6 @@ endif obj-$(CONFIG_HAVE_ARM_SMCCC) += smccc-call.o +obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o + extra-y := $(head-y) vmlinux.lds diff --git a/arch/arm/kernel/bugs.c b/arch/arm/kernel/bugs.c index d41d3598e5e5..e9fc25350784 100644 --- a/arch/arm/kernel/bugs.c +++ b/arch/arm/kernel/bugs.c @@ -1,5 +1,6 @@ // SPDX-Identifier: GPL-2.0 #include <linux/init.h> +#include <linux/cpu.h> #include <asm/bugs.h> #include <asm/proc-fns.h> @@ -11,7 +12,7 @@ void check_other_bugs(void) #endif } -void __init check_bugs(void) +void __init arch_cpu_finalize_init(void) { check_writebuffer_bugs(); check_other_bugs(); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 89e551eebff1..d779cd1a3b0c 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -620,11 +620,9 @@ call_fpe: tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2 reteq lr and r8, r0, #0x00000f00 @ mask out CP number - THUMB( lsr r8, r8, #8 ) mov r7, #1 - add r6, r10, #TI_USED_CP - ARM( strb r7, [r6, r8, lsr #8] ) @ set appropriate used_cp[] - THUMB( strb r7, [r6, r8] ) @ set appropriate used_cp[] + add r6, r10, r8, lsr #8 @ add used_cp[] array offset first + strb r7, [r6, #TI_USED_CP] @ set appropriate used_cp[] #ifdef CONFIG_IWMMXT @ Test if we need to give access to iWMMXt coprocessors ldr r5, [r10, #TI_FLAGS] @@ -633,7 +631,7 @@ call_fpe: bcs iwmmxt_task_enable #endif ARM( add pc, pc, r8, lsr #6 ) - THUMB( lsl r8, r8, #2 ) + THUMB( lsr r8, r8, #6 ) THUMB( add pc, r8 ) nop @@ -1031,12 +1029,11 @@ vector_\name: sub lr, lr, #\correction .endif - @ - @ Save r0, lr_<exception> (parent PC) and spsr_<exception> - @ (parent CPSR) - @ + @ Save r0, lr_<exception> (parent PC) stmia sp, {r0, lr} @ save r0, lr - mrs lr, spsr + + @ Save spsr_<exception> (parent CPSR) +2: mrs lr, spsr str lr, [sp, #8] @ save spsr @ @@ -1057,6 +1054,44 @@ vector_\name: movs pc, lr @ branch to handler in SVC mode ENDPROC(vector_\name) +#ifdef CONFIG_HARDEN_BRANCH_HISTORY + .subsection 1 + .align 5 +vector_bhb_loop8_\name: + .if \correction + sub lr, lr, #\correction + .endif + + @ Save r0, lr_<exception> (parent PC) + stmia sp, {r0, lr} + + @ bhb workaround + mov r0, #8 +3: W(b) . + 4 + subs r0, r0, #1 + bne 3b + dsb + isb + b 2b +ENDPROC(vector_bhb_loop8_\name) + +vector_bhb_bpiall_\name: + .if \correction + sub lr, lr, #\correction + .endif + + @ Save r0, lr_<exception> (parent PC) + stmia sp, {r0, lr} + + @ bhb workaround + mcr p15, 0, r0, c7, c5, 6 @ BPIALL + @ isb not needed due to "movs pc, lr" in the vector stub + @ which gives a "context synchronisation". + b 2b +ENDPROC(vector_bhb_bpiall_\name) + .previous +#endif + .align 2 @ handler addresses follow this label 1: @@ -1065,6 +1100,10 @@ ENDPROC(vector_\name) .section .stubs, "ax", %progbits @ This must be the first word .word vector_swi +#ifdef CONFIG_HARDEN_BRANCH_HISTORY + .word vector_bhb_loop8_swi + .word vector_bhb_bpiall_swi +#endif vector_rst: ARM( swi SYS_ERROR0 ) @@ -1179,8 +1218,10 @@ vector_addrexcptn: * FIQ "NMI" handler *----------------------------------------------------------------------------- * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86 - * systems. + * systems. This must be the last vector stub, so lets place it in its own + * subsection. */ + .subsection 2 vector_stub fiq, FIQ_MODE, 4 .long __fiq_usr @ 0 (USR_26 / USR_32) @@ -1213,6 +1254,30 @@ vector_addrexcptn: W(b) vector_irq W(b) vector_fiq +#ifdef CONFIG_HARDEN_BRANCH_HISTORY + .section .vectors.bhb.loop8, "ax", %progbits +.L__vectors_bhb_loop8_start: + W(b) vector_rst + W(b) vector_bhb_loop8_und + W(ldr) pc, .L__vectors_bhb_loop8_start + 0x1004 + W(b) vector_bhb_loop8_pabt + W(b) vector_bhb_loop8_dabt + W(b) vector_addrexcptn + W(b) vector_bhb_loop8_irq + W(b) vector_bhb_loop8_fiq + + .section .vectors.bhb.bpiall, "ax", %progbits +.L__vectors_bhb_bpiall_start: + W(b) vector_rst + W(b) vector_bhb_bpiall_und + W(ldr) pc, .L__vectors_bhb_bpiall_start + 0x1008 + W(b) vector_bhb_bpiall_pabt + W(b) vector_bhb_bpiall_dabt + W(b) vector_addrexcptn + W(b) vector_bhb_bpiall_irq + W(b) vector_bhb_bpiall_fiq +#endif + .data .align 2 diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 08f4fcb9b3b5..d0925c1a422f 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -166,12 +166,36 @@ ENDPROC(ret_from_fork) */ .align 5 +#ifdef CONFIG_HARDEN_BRANCH_HISTORY +ENTRY(vector_bhb_loop8_swi) + sub sp, sp, #PT_REGS_SIZE + stmia sp, {r0 - r12} + mov r8, #8 +1: b 2f +2: subs r8, r8, #1 + bne 1b + dsb + isb + b 3f +ENDPROC(vector_bhb_loop8_swi) + + .align 5 +ENTRY(vector_bhb_bpiall_swi) + sub sp, sp, #PT_REGS_SIZE + stmia sp, {r0 - r12} + mcr p15, 0, r8, c7, c5, 6 @ BPIALL + isb + b 3f +ENDPROC(vector_bhb_bpiall_swi) +#endif + .align 5 ENTRY(vector_swi) #ifdef CONFIG_CPU_V7M v7m_exception_entry #else sub sp, sp, #PT_REGS_SIZE stmia sp, {r0 - r12} @ Calling r0 - r12 +3: ARM( add r8, sp, #S_PC ) ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr THUMB( mov r8, sp ) diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 2ee5b7f5e7ad..c71ecd06131c 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -631,7 +631,7 @@ int hw_breakpoint_arch_parse(struct perf_event *bp, hw->address &= ~alignment_mask; hw->ctrl.len <<= offset; - if (is_default_overflow_handler(bp)) { + if (uses_default_overflow_handler(bp)) { /* * Mismatch breakpoints are required for single-stepping * breakpoints. @@ -803,7 +803,7 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, * Otherwise, insert a temporary mismatch breakpoint so that * we can single-step over the watchpoint trigger. */ - if (!is_default_overflow_handler(wp)) + if (!uses_default_overflow_handler(wp)) continue; step: enable_single_step(wp, instruction_pointer(regs)); @@ -816,7 +816,7 @@ step: info->trigger = addr; pr_debug("watchpoint fired: address = 0x%x\n", info->trigger); perf_bp_event(wp, regs); - if (is_default_overflow_handler(wp)) + if (uses_default_overflow_handler(wp)) enable_single_step(wp, instruction_pointer(regs)); } @@ -891,7 +891,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs) info->trigger = addr; pr_debug("breakpoint fired: address = 0x%x\n", addr); perf_bp_event(bp, regs); - if (is_default_overflow_handler(bp)) + if (uses_default_overflow_handler(bp)) enable_single_step(bp, addr); goto unlock; } diff --git a/arch/arm/kernel/spectre.c b/arch/arm/kernel/spectre.c new file mode 100644 index 000000000000..0dcefc36fb7a --- /dev/null +++ b/arch/arm/kernel/spectre.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <linux/bpf.h> +#include <linux/cpu.h> +#include <linux/device.h> + +#include <asm/spectre.h> + +static bool _unprivileged_ebpf_enabled(void) +{ +#ifdef CONFIG_BPF_SYSCALL + return !sysctl_unprivileged_bpf_disabled; +#else + return false; +#endif +} + +ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "Mitigation: __user pointer sanitization\n"); +} + +static unsigned int spectre_v2_state; +static unsigned int spectre_v2_methods; + +void spectre_v2_update_state(unsigned int state, unsigned int method) +{ + if (state > spectre_v2_state) + spectre_v2_state = state; + spectre_v2_methods |= method; +} + +ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, + char *buf) +{ + const char *method; + + if (spectre_v2_state == SPECTRE_UNAFFECTED) + return sprintf(buf, "%s\n", "Not affected"); + + if (spectre_v2_state != SPECTRE_MITIGATED) + return sprintf(buf, "%s\n", "Vulnerable"); + + if (_unprivileged_ebpf_enabled()) + return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n"); + + switch (spectre_v2_methods) { + case SPECTRE_V2_METHOD_BPIALL: + method = "Branch predictor hardening"; + break; + + case SPECTRE_V2_METHOD_ICIALLU: + method = "I-cache invalidation"; + break; + + case SPECTRE_V2_METHOD_SMC: + case SPECTRE_V2_METHOD_HVC: + method = "Firmware call"; + break; + + case SPECTRE_V2_METHOD_LOOP8: + method = "History overwrite"; + break; + + default: + method = "Multiple mitigations"; + break; + } + + return sprintf(buf, "Mitigation: %s\n", method); +} diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index a452b859f485..d99b45307566 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -52,17 +52,17 @@ int notrace unwind_frame(struct stackframe *frame) return -EINVAL; frame->sp = frame->fp; - frame->fp = *(unsigned long *)(fp); - frame->pc = *(unsigned long *)(fp + 4); + frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp)); + frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4)); #else /* check current frame pointer is within bounds */ if (fp < low + 12 || fp > high - 4) return -EINVAL; /* restore the registers from the stack frame */ - frame->fp = *(unsigned long *)(fp - 12); - frame->sp = *(unsigned long *)(fp - 8); - frame->pc = *(unsigned long *)(fp - 4); + frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 12)); + frame->sp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 8)); + frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 4)); #endif return 0; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index aec533168f04..02a4aea52fb0 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -33,6 +33,7 @@ #include <linux/atomic.h> #include <asm/cacheflush.h> #include <asm/exception.h> +#include <asm/spectre.h> #include <asm/unistd.h> #include <asm/traps.h> #include <asm/ptrace.h> @@ -343,7 +344,7 @@ static void oops_end(unsigned long flags, struct pt_regs *regs, int signr) if (panic_on_oops) panic("Fatal exception"); if (signr) - do_exit(signr); + make_task_dead(signr); } /* @@ -830,10 +831,59 @@ static inline void __init kuser_init(void *vectors) } #endif +#ifndef CONFIG_CPU_V7M +static void copy_from_lma(void *vma, void *lma_start, void *lma_end) +{ + memcpy(vma, lma_start, lma_end - lma_start); +} + +static void flush_vectors(void *vma, size_t offset, size_t size) +{ + unsigned long start = (unsigned long)vma + offset; + unsigned long end = start + size; + + flush_icache_range(start, end); +} + +#ifdef CONFIG_HARDEN_BRANCH_HISTORY +int spectre_bhb_update_vectors(unsigned int method) +{ + extern char __vectors_bhb_bpiall_start[], __vectors_bhb_bpiall_end[]; + extern char __vectors_bhb_loop8_start[], __vectors_bhb_loop8_end[]; + void *vec_start, *vec_end; + + if (system_state > SYSTEM_SCHEDULING) { + pr_err("CPU%u: Spectre BHB workaround too late - system vulnerable\n", + smp_processor_id()); + return SPECTRE_VULNERABLE; + } + + switch (method) { + case SPECTRE_V2_METHOD_LOOP8: + vec_start = __vectors_bhb_loop8_start; + vec_end = __vectors_bhb_loop8_end; + break; + + case SPECTRE_V2_METHOD_BPIALL: + vec_start = __vectors_bhb_bpiall_start; + vec_end = __vectors_bhb_bpiall_end; + break; + + default: + pr_err("CPU%u: unknown Spectre BHB state %d\n", + smp_processor_id(), method); + return SPECTRE_VULNERABLE; + } + + copy_from_lma(vectors_page, vec_start, vec_end); + flush_vectors(vectors_page, 0, vec_end - vec_start); + + return SPECTRE_MITIGATED; +} +#endif + void __init early_trap_init(void *vectors_base) { -#ifndef CONFIG_CPU_V7M - unsigned long vectors = (unsigned long)vectors_base; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; unsigned i; @@ -854,17 +904,20 @@ void __init early_trap_init(void *vectors_base) * into the vector page, mapped at 0xffff0000, and ensure these * are visible to the instruction stream. */ - memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start); - memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start); + copy_from_lma(vectors_base, __vectors_start, __vectors_end); + copy_from_lma(vectors_base + 0x1000, __stubs_start, __stubs_end); kuser_init(vectors_base); - flush_icache_range(vectors, vectors + PAGE_SIZE * 2); + flush_vectors(vectors_base, 0, PAGE_SIZE * 2); +} #else /* ifndef CONFIG_CPU_V7M */ +void __init early_trap_init(void *vectors_base) +{ /* * on V7-M there is no need to copy the vector table to a dedicated * memory area. The address is configurable and so a table in the kernel * image can be used. */ -#endif } +#endif diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 314cfb232a63..f2bb090373c6 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -313,6 +313,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl, return URC_OK; } +static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl) +{ + unsigned long bytes = 0; + unsigned long insn; + unsigned long result = 0; + + /* + * unwind_get_byte() will advance `ctrl` one instruction at a time, so + * loop until we get an instruction byte where bit 7 is not set. + * + * Note: This decodes a maximum of 4 bytes to output 28 bits data where + * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence + * it is sufficient for unwinding the stack. + */ + do { + insn = unwind_get_byte(ctrl); + result |= (insn & 0x7f) << (bytes * 7); + bytes++; + } while (!!(insn & 0x80) && (bytes != sizeof(result))); + + return result; +} + /* * Execute the current unwind instruction. */ @@ -366,7 +389,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) if (ret) goto error; } else if (insn == 0xb2) { - unsigned long uleb128 = unwind_get_byte(ctrl); + unsigned long uleb128 = unwind_decode_uleb128(ctrl); ctrl->vrs[SP] += 0x204 + (uleb128 << 2); } else { diff --git a/arch/arm/kernel/vmlinux.lds.h b/arch/arm/kernel/vmlinux.lds.h index 8247bc15addc..78d156e4f008 100644 --- a/arch/arm/kernel/vmlinux.lds.h +++ b/arch/arm/kernel/vmlinux.lds.h @@ -25,6 +25,19 @@ #define ARM_MMU_DISCARD(x) x #endif +/* + * ld.lld does not support NOCROSSREFS: + * https://github.com/ClangBuiltLinux/linux/issues/1609 + */ +#ifdef CONFIG_LD_IS_LLD +#define NOCROSSREFS +#endif + +/* Set start/end symbol names to the LMA for the section */ +#define ARM_LMA(sym, section) \ + sym##_start = LOADADDR(section); \ + sym##_end = LOADADDR(section) + SIZEOF(section) + #define PROC_INFO \ . = ALIGN(4); \ __proc_info_begin = .; \ @@ -100,19 +113,31 @@ * only thing that matters is their relative offsets */ #define ARM_VECTORS \ - __vectors_start = .; \ - .vectors 0xffff0000 : AT(__vectors_start) { \ - *(.vectors) \ + __vectors_lma = .; \ + OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) { \ + .vectors { \ + *(.vectors) \ + } \ + .vectors.bhb.loop8 { \ + *(.vectors.bhb.loop8) \ + } \ + .vectors.bhb.bpiall { \ + *(.vectors.bhb.bpiall) \ + } \ } \ - . = __vectors_start + SIZEOF(.vectors); \ - __vectors_end = .; \ + ARM_LMA(__vectors, .vectors); \ + ARM_LMA(__vectors_bhb_loop8, .vectors.bhb.loop8); \ + ARM_LMA(__vectors_bhb_bpiall, .vectors.bhb.bpiall); \ + . = __vectors_lma + SIZEOF(.vectors) + \ + SIZEOF(.vectors.bhb.loop8) + \ + SIZEOF(.vectors.bhb.bpiall); \ \ - __stubs_start = .; \ - .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) { \ + __stubs_lma = .; \ + .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) { \ *(.stubs) \ } \ - . = __stubs_start + SIZEOF(.stubs); \ - __stubs_end = .; \ + ARM_LMA(__stubs, .stubs); \ + . = __stubs_lma + SIZEOF(.stubs); \ \ PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors)); diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 7848780e8834..20fef6c41f6f 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -43,8 +43,8 @@ ENDPROC(_find_first_zero_bit_le) * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset) */ ENTRY(_find_next_zero_bit_le) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine ARM( ldrb r3, [r0, r2, lsr #3] ) @@ -84,8 +84,8 @@ ENDPROC(_find_first_bit_le) * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset) */ ENTRY(_find_next_bit_le) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine ARM( ldrb r3, [r0, r2, lsr #3] ) @@ -118,8 +118,8 @@ ENTRY(_find_first_zero_bit_be) ENDPROC(_find_first_zero_bit_be) ENTRY(_find_next_zero_bit_be) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine eor r3, r2, #0x18 @ big endian byte ordering @@ -152,8 +152,8 @@ ENTRY(_find_first_bit_be) ENDPROC(_find_first_bit_be) ENTRY(_find_next_bit_be) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine eor r3, r2, #0x18 @ big endian byte ordering diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index ed6d35d9cdb5..a68688f3f3b3 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -19,6 +19,7 @@ ENTRY(mmioset) ENTRY(memset) UNWIND( .fnstart ) + and r1, r1, #255 @ cast to unsigned char ands r3, r0, #3 @ 1 unaligned? mov ip, r0 @ preserve r0 as return value bne 6f @ 1 diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c index c691b901092f..b4feebc385bc 100644 --- a/arch/arm/lib/xor-neon.c +++ b/arch/arm/lib/xor-neon.c @@ -29,8 +29,9 @@ MODULE_LICENSE("GPL"); * While older versions of GCC do not generate incorrect code, they fail to * recognize the parallel nature of these functions, and emit plain ARM code, * which is known to be slower than the optimized ARM code in asm-arm/xor.h. + * + * #warning This code requires at least version 4.6 of GCC */ -#warning This code requires at least version 4.6 of GCC #endif #pragma GCC diagnostic ignored "-Wunused-variable" diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 21bfe9b6e16a..3ba0c6c560d8 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -95,7 +95,7 @@ static const struct wakeup_source_info ws_info[] = { static const struct of_device_id sama5d2_ws_ids[] = { { .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] }, - { .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] }, + { .compatible = "atmel,sama5d2-rtc", .data = &ws_info[1] }, { .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] }, { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, { .compatible = "usb-ohci", .data = &ws_info[2] }, diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c index 502e3df69f69..c706a11c2193 100644 --- a/arch/arm/mach-axxia/platsmp.c +++ b/arch/arm/mach-axxia/platsmp.c @@ -42,6 +42,7 @@ static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle) return -ENOENT; syscon = of_iomap(syscon_np, 0); + of_node_put(syscon_np); if (!syscon) return -ENOMEM; diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index a55a7ecf146a..dd0b4195e629 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -54,6 +54,7 @@ int __init bcm_kona_smc_init(void) return -ENODEV; prop_val = of_get_address(node, 0, &prop_size, NULL); + of_node_put(node); if (!prop_val) return -EINVAL; diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 7d5a44a06648..95716fc9e628 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -379,6 +379,7 @@ static void __init cns3xxx_init(void) /* De-Asscer SATA Reset */ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA)); } + of_node_put(dn); dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci"); if (of_device_is_available(dn)) { @@ -392,6 +393,7 @@ static void __init cns3xxx_init(void) cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO)); cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO)); } + of_node_put(dn); pm_power_off = cns3xxx_power_off; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 774a3e535ad0..2afc2ff6f55a 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -1045,11 +1045,13 @@ static int __init da850_evm_config_emac(void) int ret; u32 val; struct davinci_soc_info *soc_info = &davinci_soc_info; - u8 rmii_en = soc_info->emac_pdata->rmii_en; + u8 rmii_en; if (!machine_is_davinci_da850_evm()) return 0; + rmii_en = soc_info->emac_pdata->rmii_en; + cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); val = __raw_readl(cfg_chip3_base); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 865dcc4c3181..23adb1a54bcd 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -131,6 +131,7 @@ static void exynos_map_pmu(void) np = of_find_matching_node(NULL, exynos_dt_pmu_match); if (np) pmu_base_addr = of_iomap(np, 0); + of_node_put(np); } static void __init exynos_init_irq(void) diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index da5689ababf7..d7fbfb6d293d 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -70,14 +70,17 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus) } ctrl_base = of_iomap(np, 0); if (!ctrl_base) { + of_node_put(np); pr_err("failed to map address\n"); return; } if (of_property_read_u32(np, "smp-offset", &offset) < 0) { + of_node_put(np); pr_err("failed to find smp-offset property\n"); return; } ctrl_base += offset; + of_node_put(np); } } @@ -163,6 +166,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle) if (WARN_ON(!node)) return -1; ctrl_base = of_iomap(node, 0); + of_node_put(node); /* set the secondary core boot from DDR */ remap_reg_value = readl_relaxed(ctrl_base + REG_SC_CTRL); diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index 14be73ca107a..67cf02c2f2ec 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -105,6 +105,7 @@ struct mmdc_pmu { cpumask_t cpu; struct hrtimer hrtimer; unsigned int active_events; + int id; struct device *dev; struct perf_event *mmdc_events[MMDC_NUM_COUNTERS]; struct hlist_node node; @@ -445,8 +446,6 @@ static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer) static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc, void __iomem *mmdc_base, struct device *dev) { - int mmdc_num; - *pmu_mmdc = (struct mmdc_pmu) { .pmu = (struct pmu) { .task_ctx_nr = perf_invalid_context, @@ -463,15 +462,16 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc, .active_events = 0, }; - mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL); + pmu_mmdc->id = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL); - return mmdc_num; + return pmu_mmdc->id; } static int imx_mmdc_remove(struct platform_device *pdev) { struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev); + ida_simple_remove(&mmdc_ida, pmu_mmdc->id); cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node); perf_pmu_unregister(&pmu_mmdc->pmu); iounmap(pmu_mmdc->mmdc_base); @@ -485,7 +485,6 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b { struct mmdc_pmu *pmu_mmdc; char *name; - int mmdc_num; int ret; const struct of_device_id *of_id = of_match_device(imx_mmdc_dt_ids, &pdev->dev); @@ -508,14 +507,18 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b cpuhp_mmdc_state = ret; } - mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev); - pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk; - if (mmdc_num == 0) - name = "mmdc"; - else - name = devm_kasprintf(&pdev->dev, - GFP_KERNEL, "mmdc%d", mmdc_num); + ret = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev); + if (ret < 0) + goto pmu_free; + name = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "mmdc%d", ret); + if (!name) { + ret = -ENOMEM; + goto pmu_release_id; + } + + pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk; pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data; hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC, @@ -538,6 +541,8 @@ pmu_register_err: pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret); cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node); hrtimer_cancel(&pmu_mmdc->hrtimer); +pmu_release_id: + ida_simple_remove(&mmdc_ida, pmu_mmdc->id); pmu_free: kfree(pmu_mmdc); return ret; diff --git a/arch/arm/mach-meson/platsmp.c b/arch/arm/mach-meson/platsmp.c index cad7ee8f0d6b..75e16a2c3c81 100644 --- a/arch/arm/mach-meson/platsmp.c +++ b/arch/arm/mach-meson/platsmp.c @@ -81,6 +81,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible, } sram_base = of_iomap(node, 0); + of_node_put(node); if (!sram_base) { pr_err("Couldn't map SRAM registers\n"); return; @@ -101,6 +102,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible, } scu_base = of_iomap(node, 0); + of_node_put(node); if (!scu_base) { pr_err("Couldn't map SCU registers\n"); return; diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index ba91e4fe444d..3c4e41dabb02 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -76,6 +76,8 @@ static int sram_probe(struct platform_device *pdev) if (!info) return -ENOMEM; + platform_set_drvdata(pdev, info); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "no memory resource defined\n"); @@ -111,8 +113,6 @@ static int sram_probe(struct platform_device *pdev) list_add(&info->node, &sram_bank_list); mutex_unlock(&sram_lock); - platform_set_drvdata(pdev, info); - dev_info(&pdev->dev, "initialized\n"); return 0; @@ -131,17 +131,19 @@ static int sram_remove(struct platform_device *pdev) struct sram_bank_info *info; info = platform_get_drvdata(pdev); - if (info == NULL) - return -ENODEV; - mutex_lock(&sram_lock); - list_del(&info->node); - mutex_unlock(&sram_lock); + if (info->sram_size) { + mutex_lock(&sram_lock); + list_del(&info->node); + mutex_unlock(&sram_lock); + + gen_pool_destroy(info->gpool); + iounmap(info->sram_virt); + kfree(info->pool_name); + } - gen_pool_destroy(info->gpool); - iounmap(info->sram_virt); - kfree(info->pool_name); kfree(info); + return 0; } diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 96ad1db0b04b..edd280e75546 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -52,18 +52,21 @@ static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE; /* - * FIXME: the timer needs some delay to stablize the counter capture + * Read the timer through the CVWR register. Delay is required after requesting + * a read. The CR register cannot be directly read due to metastability issues + * documented in the PXA168 software manual. */ static inline uint32_t timer_read(void) { - int delay = 100; + uint32_t val; + int delay = 3; __raw_writel(1, mmp_timer_base + TMR_CVWR(1)); while (delay--) - cpu_relax(); + val = __raw_readl(mmp_timer_base + TMR_CVWR(1)); - return __raw_readl(mmp_timer_base + TMR_CVWR(1)); + return val; } static u64 notrace mmp_read_sched_clock(void) diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 1c6062d240c8..4063fc1f435b 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -393,8 +393,10 @@ static void __init mxs_machine_init(void) root = of_find_node_by_path("/"); ret = of_property_read_string(root, "model", &soc_dev_attr->machine); - if (ret) + if (ret) { + kfree(soc_dev_attr); return; + } soc_dev_attr->family = "Freescale MXS Family"; soc_dev_attr->soc_id = mxs_get_soc_id(); diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index fa512413a471..b277409f303a 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(clockfw_lock); unsigned long omap1_uart_recalc(struct clk *clk) { unsigned int val = __raw_readl(clk->enable_reg); - return val & clk->enable_bit ? 48000000 : 12000000; + return val & 1 << clk->enable_bit ? 48000000 : 12000000; } unsigned long omap1_sossi_recalc(struct clk *clk) diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 4447210c9b0d..291bc376d30e 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -165,7 +165,7 @@ err_free_pdata: kfree(pdata); err_free_pdev: - platform_device_unregister(pdev); + platform_device_put(pdev); return ret; } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 5d73f2c0b117..dd2ff10790ab 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -211,6 +211,7 @@ static int __init omapdss_init_fbdev(void) node = of_find_node_by_name(NULL, "omap4_padconf_global"); if (node) omap4_dsi_mux_syscon = syscon_node_to_regmap(node); + of_node_put(node); return 0; } diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 859c71c4e932..df8a9dda67a0 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -800,10 +800,15 @@ void __init omap_soc_device_init(void) soc_dev_attr->machine = soc_name; soc_dev_attr->family = omap_get_family(); + if (!soc_dev_attr->family) { + kfree(soc_dev_attr); + return; + } soc_dev_attr->revision = soc_rev; soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); kfree(soc_dev_attr); return; } diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 7074cfd1ff41..79a1e4c51e3d 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -318,10 +318,12 @@ void __init omap_gic_of_init(void) np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic"); gic_dist_base_addr = of_iomap(np, 0); + of_node_put(np); WARN_ON(!gic_dist_base_addr); np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer"); twd_base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!twd_base); skip_errata_init: diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index a8269f0a87ce..47c55351df03 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -754,8 +754,10 @@ static int __init _init_clkctrl_providers(void) for_each_matching_node(np, ti_clkctrl_match_table) { ret = _setup_clkctrl_provider(np); - if (ret) + if (ret) { + of_node_put(np); break; + } } return ret; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 1a0f69c0a376..27c652eaa175 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -177,7 +177,7 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) break; case PWRDM_STATE_PREV: prev = pwrdm_read_prev_pwrst(pwrdm); - if (pwrdm->state != prev) + if (prev >= 0 && pwrdm->state != prev) pwrdm->state_counter[prev]++; if (prev == PWRDM_POWER_RET) _update_logic_membank_counters(pwrdm); diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index dfa65fc2c82b..30445849b5e3 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -711,6 +711,7 @@ static int omap3xxx_prm_late_init(void) } irq_num = of_irq_get(np, 0); + of_node_put(np); if (irq_num == -EPROBE_DEFER) return irq_num; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index c4ba848e8af6..d98aa78b9be9 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -701,6 +701,7 @@ static void __init realtime_counter_init(void) } rate = clk_get_rate(sys_clk); + clk_put(sys_clk); if (soc_is_dra7xx()) { /* diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 3d36f1d95196..3f651df3a71c 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -63,6 +63,9 @@ static void __init orion5x_dt_init(void) if (of_machine_is_compatible("maxtor,shared-storage-2")) mss2_init(); + if (of_machine_is_compatible("lacie,d2-network")) + d2net_init(); + of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index eb96009e21c4..b9cfdb456456 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -75,6 +75,12 @@ extern void mss2_init(void); static inline void mss2_init(void) {} #endif +#ifdef CONFIG_MACH_D2NET_DT +void d2net_init(void); +#else +static inline void d2net_init(void) {} +#endif + /***************************************************************************** * Helpers to access Orion registers ****************************************************************************/ diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index ef9fd9b759cb..34dc87085724 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -224,8 +224,6 @@ void sharpsl_battery_kick(void) { schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); } -EXPORT_SYMBOL(sharpsl_battery_kick); - static void sharpsl_battery_thread(struct work_struct *private_) { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 5d50025492b7..af35a0ba2dca 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -13,7 +13,6 @@ */ #include <linux/kernel.h> -#include <linux/module.h> /* symbol_get ; symbol_put */ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio_keys.h> @@ -517,17 +516,6 @@ static struct pxa2xx_spi_chip spitz_ads7846_chip = { .gpio_cs = SPITZ_GPIO_ADS7846_CS, }; -static void spitz_bl_kick_battery(void) -{ - void (*kick_batt)(void); - - kick_batt = symbol_get(sharpsl_battery_kick); - if (kick_batt) { - kick_batt(); - symbol_put(sharpsl_battery_kick); - } -} - static struct corgi_lcd_platform_data spitz_lcdcon_info = { .init_mode = CORGI_LCD_MODE_VGA, .max_intensity = 0x2f, @@ -535,7 +523,7 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = { .limit_mask = 0x0b, .gpio_backlight_cont = SPITZ_GPIO_BACKLIGHT_CONT, .gpio_backlight_on = SPITZ_GPIO_BACKLIGHT_ON, - .kick_battery = spitz_bl_kick_battery, + .kick_battery = sharpsl_battery_kick, }; static struct pxa2xx_spi_chip spitz_lcdcon_chip = { diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 885e8f12e4b9..eedc9f8ed210 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -237,11 +237,11 @@ static int __init jive_mtdset(char *options) unsigned long set; if (options == NULL || options[0] == '\0') - return 0; + return 1; if (kstrtoul(options, 10, &set)) { printk(KERN_ERR "failed to parse mtdset=%s\n", options); - return 0; + return 1; } switch (set) { @@ -256,7 +256,7 @@ static int __init jive_mtdset(char *options) "using default.", set); } - return 0; + return 1; } /* parse the mtdset= option given to the kernel command line */ diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 575ec085cffa..73bedccedb58 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -570,7 +570,7 @@ static void __init map_sa1100_gpio_regs( void ) */ static void __init get_assabet_scr(void) { - unsigned long uninitialized_var(scr), i; + unsigned long scr, i; GPDR |= 0x3fc; /* Configure GPIO 9:2 as outputs */ GPSR = 0x3fc; /* Write 0xFF to GPIO 9:2 */ diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c index ff173e67eed2..e30ac09930cf 100644 --- a/arch/arm/mach-sunxi/mc_smp.c +++ b/arch/arm/mach-sunxi/mc_smp.c @@ -801,16 +801,16 @@ static int __init sunxi_mc_smp_init(void) for (i = 0; i < ARRAY_SIZE(sunxi_mc_smp_data); i++) { ret = of_property_match_string(node, "enable-method", sunxi_mc_smp_data[i].enable_method); - if (!ret) + if (ret >= 0) break; } - is_a83t = sunxi_mc_smp_data[i].is_a83t; - of_node_put(node); - if (ret) + if (ret < 0) return -ENODEV; + is_a83t = sunxi_mc_smp_data[i].is_a83t; + if (!sunxi_mc_smp_cpu_table_init()) return -EINVAL; diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index ee2a0faafaa1..aaade91f6551 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -146,6 +146,7 @@ static int __init dcscb_init(void) if (!node) return -ENODEV; dcscb_base = of_iomap(node, 0); + of_node_put(node); if (!dcscb_base) return -EADDRNOTAVAIL; cfg = readl_relaxed(dcscb_base + DCS_CFG_R); diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 55bbbc3b328f..e65c04be86cc 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -580,7 +580,7 @@ static int __init ve_spc_clk_init(void) } cluster = topology_physical_package_id(cpu_dev->id); - if (init_opp_table[cluster]) + if (cluster < 0 || init_opp_table[cluster]) continue; if (ve_init_opp_table(cpu_dev)) diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 6aba9ebf8041..a8b1b9c6626e 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -84,6 +84,7 @@ static int __init zynq_get_revision(void) } zynq_devcfg_base = of_iomap(np, 0); + of_node_put(np); if (!zynq_devcfg_base) { pr_err("%s: Unable to map I/O memory\n", __func__); return -1; diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index f0292a30e6f6..6b75ef7be3fd 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -222,6 +222,7 @@ int __init zynq_early_slcr_init(void) zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr"); if (IS_ERR(zynq_slcr_regmap)) { pr_err("%s: failed to find zynq-slcr\n", __func__); + of_node_put(np); return -ENODEV; } diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 9738c1f9737c..7f11e44cf7cc 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -823,6 +823,7 @@ config CPU_BPREDICT_DISABLE config CPU_SPECTRE bool + select GENERIC_CPU_VULNERABILITIES config HARDEN_BRANCH_PREDICTOR bool "Harden the branch predictor against aliasing attacks" if EXPERT @@ -843,6 +844,16 @@ config HARDEN_BRANCH_PREDICTOR If unsure, say Y. +config HARDEN_BRANCH_HISTORY + bool "Harden Spectre style attacks against branch history" if EXPERT + depends on CPU_SPECTRE + default y + help + Speculation attacks against some high-performance processors can + make use of branch history to influence future speculation. When + taking an exception, a sequence of branches overwrites the branch + history, or branch history is invalidated. + config TLS_REG_EMUL bool select NEED_KUSER_HELPERS diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 84a6bbaf8cb2..633d47028695 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -936,6 +936,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (type == TYPE_LDST) do_alignment_finish_ldst(addr, instr, regs, offset); + if (thumb_mode(regs)) + regs->ARM_cpsr = it_advance(regs->ARM_cpsr); + return 0; bad_or_fault: diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c index d130a5ece5d5..bf24690ec83a 100644 --- a/arch/arm/mm/copypage-fa.c +++ b/arch/arm/mm/copypage-fa.c @@ -17,26 +17,25 @@ /* * Faraday optimised copy_user_page */ -static void __naked -fa_copy_user_page(void *kto, const void *kfrom) +static void fa_copy_user_page(void *kto, const void *kfrom) { - asm("\ - stmfd sp!, {r4, lr} @ 2\n\ - mov r2, %0 @ 1\n\ -1: ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - stmia r0, {r3, r4, ip, lr} @ 4\n\ - mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\ - add r0, r0, #16 @ 1\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - stmia r0, {r3, r4, ip, lr} @ 4\n\ - mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\ - add r0, r0, #16 @ 1\n\ - subs r2, r2, #1 @ 1\n\ + int tmp; + + asm volatile ("\ +1: ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + stmia %0, {r3, r4, ip, lr} @ 4\n\ + mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\ + add %0, %0, #16 @ 1\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + stmia %0, {r3, r4, ip, lr} @ 4\n\ + mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\ + add %0, %0, #16 @ 1\n\ + subs %2, %2, #1 @ 1\n\ bne 1b @ 1\n\ - mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB\n\ - ldmfd sp!, {r4, pc} @ 3" - : - : "I" (PAGE_SIZE / 32)); + mcr p15, 0, %2, c7, c10, 4 @ 1 drain WB" + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) + : "2" (PAGE_SIZE / 32) + : "r3", "r4", "ip", "lr"); } void fa_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c index 49ee0c1a7209..cc819732d9b8 100644 --- a/arch/arm/mm/copypage-feroceon.c +++ b/arch/arm/mm/copypage-feroceon.c @@ -13,58 +13,56 @@ #include <linux/init.h> #include <linux/highmem.h> -static void __naked -feroceon_copy_user_page(void *kto, const void *kfrom) +static void feroceon_copy_user_page(void *kto, const void *kfrom) { - asm("\ - stmfd sp!, {r4-r9, lr} \n\ - mov ip, %2 \n\ -1: mov lr, r1 \n\ - ldmia r1!, {r2 - r9} \n\ - pld [lr, #32] \n\ - pld [lr, #64] \n\ - pld [lr, #96] \n\ - pld [lr, #128] \n\ - pld [lr, #160] \n\ - pld [lr, #192] \n\ - pld [lr, #224] \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - subs ip, ip, #(32 * 8) \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ + int tmp; + + asm volatile ("\ +1: ldmia %1!, {r2 - r7, ip, lr} \n\ + pld [%1, #0] \n\ + pld [%1, #32] \n\ + pld [%1, #64] \n\ + pld [%1, #96] \n\ + pld [%1, #128] \n\ + pld [%1, #160] \n\ + pld [%1, #192] \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + subs %2, %2, #(32 * 8) \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ bne 1b \n\ - mcr p15, 0, ip, c7, c10, 4 @ drain WB\n\ - ldmfd sp!, {r4-r9, pc}" - : - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE)); + mcr p15, 0, %2, c7, c10, 4 @ drain WB" + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) + : "2" (PAGE_SIZE) + : "r2", "r3", "r4", "r5", "r6", "r7", "ip", "lr"); } void feroceon_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 0224416cba3c..b03202cddddb 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -40,12 +40,11 @@ static DEFINE_RAW_SPINLOCK(minicache_lock); * instruction. If your processor does not supply this, you have to write your * own copy_user_highpage that does the right thing. */ -static void __naked -mc_copy_user_page(void *from, void *to) +static void mc_copy_user_page(void *from, void *to) { - asm volatile( - "stmfd sp!, {r4, lr} @ 2\n\ - mov r4, %2 @ 1\n\ + int tmp; + + asm volatile ("\ ldmia %0!, {r2, r3, ip, lr} @ 4\n\ 1: mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\ stmia %1!, {r2, r3, ip, lr} @ 4\n\ @@ -55,13 +54,13 @@ mc_copy_user_page(void *from, void *to) mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\ stmia %1!, {r2, r3, ip, lr} @ 4\n\ ldmia %0!, {r2, r3, ip, lr} @ 4\n\ - subs r4, r4, #1 @ 1\n\ + subs %2, %2, #1 @ 1\n\ stmia %1!, {r2, r3, ip, lr} @ 4\n\ ldmneia %0!, {r2, r3, ip, lr} @ 4\n\ - bne 1b @ 1\n\ - ldmfd sp!, {r4, pc} @ 3" - : - : "r" (from), "r" (to), "I" (PAGE_SIZE / 64)); + bne 1b @ " + : "+&r" (from), "+&r" (to), "=&r" (tmp) + : "2" (PAGE_SIZE / 64) + : "r2", "r3", "ip", "lr"); } void v4_mc_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c index 067d0fdd630c..cd3e165afeed 100644 --- a/arch/arm/mm/copypage-v4wb.c +++ b/arch/arm/mm/copypage-v4wb.c @@ -22,29 +22,28 @@ * instruction. If your processor does not supply this, you have to write your * own copy_user_highpage that does the right thing. */ -static void __naked -v4wb_copy_user_page(void *kto, const void *kfrom) +static void v4wb_copy_user_page(void *kto, const void *kfrom) { - asm("\ - stmfd sp!, {r4, lr} @ 2\n\ - mov r2, %2 @ 1\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ -1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - subs r2, r2, #1 @ 1\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmneia r1!, {r3, r4, ip, lr} @ 4\n\ + int tmp; + + asm volatile ("\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ +1: mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4+1\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + subs %2, %2, #1 @ 1\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmneia %1!, {r3, r4, ip, lr} @ 4\n\ bne 1b @ 1\n\ - mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB\n\ - ldmfd sp!, {r4, pc} @ 3" - : - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64)); + mcr p15, 0, %1, c7, c10, 4 @ 1 drain WB" + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) + : "2" (PAGE_SIZE / 64) + : "r3", "r4", "ip", "lr"); } void v4wb_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c index b85c5da2e510..8614572e1296 100644 --- a/arch/arm/mm/copypage-v4wt.c +++ b/arch/arm/mm/copypage-v4wt.c @@ -20,27 +20,26 @@ * dirty data in the cache. However, we do have to ensure that * subsequent reads are up to date. */ -static void __naked -v4wt_copy_user_page(void *kto, const void *kfrom) +static void v4wt_copy_user_page(void *kto, const void *kfrom) { - asm("\ - stmfd sp!, {r4, lr} @ 2\n\ - mov r2, %2 @ 1\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ -1: stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - subs r2, r2, #1 @ 1\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmneia r1!, {r3, r4, ip, lr} @ 4\n\ + int tmp; + + asm volatile ("\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ +1: stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4+1\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + subs %2, %2, #1 @ 1\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmneia %1!, {r3, r4, ip, lr} @ 4\n\ bne 1b @ 1\n\ - mcr p15, 0, r2, c7, c7, 0 @ flush ID cache\n\ - ldmfd sp!, {r4, pc} @ 3" - : - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64)); + mcr p15, 0, %2, c7, c7, 0 @ flush ID cache" + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) + : "2" (PAGE_SIZE / 64) + : "r3", "r4", "ip", "lr"); } void v4wt_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c index 03a2042aced5..55cbc3a89d85 100644 --- a/arch/arm/mm/copypage-xsc3.c +++ b/arch/arm/mm/copypage-xsc3.c @@ -21,53 +21,46 @@ /* * XSC3 optimised copy_user_highpage - * r0 = destination - * r1 = source * * The source page may have some clean entries in the cache already, but we * can safely ignore them - break_cow() will flush them out of the cache * if we eventually end up using our copied page. * */ -static void __naked -xsc3_mc_copy_user_page(void *kto, const void *kfrom) +static void xsc3_mc_copy_user_page(void *kto, const void *kfrom) { - asm("\ - stmfd sp!, {r4, r5, lr} \n\ - mov lr, %2 \n\ - \n\ - pld [r1, #0] \n\ - pld [r1, #32] \n\ -1: pld [r1, #64] \n\ - pld [r1, #96] \n\ + int tmp; + + asm volatile ("\ + pld [%1, #0] \n\ + pld [%1, #32] \n\ +1: pld [%1, #64] \n\ + pld [%1, #96] \n\ \n\ -2: ldrd r2, [r1], #8 \n\ - mov ip, r0 \n\ - ldrd r4, [r1], #8 \n\ - mcr p15, 0, ip, c7, c6, 1 @ invalidate\n\ - strd r2, [r0], #8 \n\ - ldrd r2, [r1], #8 \n\ - strd r4, [r0], #8 \n\ - ldrd r4, [r1], #8 \n\ - strd r2, [r0], #8 \n\ - strd r4, [r0], #8 \n\ - ldrd r2, [r1], #8 \n\ - mov ip, r0 \n\ - ldrd r4, [r1], #8 \n\ - mcr p15, 0, ip, c7, c6, 1 @ invalidate\n\ - strd r2, [r0], #8 \n\ - ldrd r2, [r1], #8 \n\ - subs lr, lr, #1 \n\ - strd r4, [r0], #8 \n\ - ldrd r4, [r1], #8 \n\ - strd r2, [r0], #8 \n\ - strd r4, [r0], #8 \n\ +2: ldrd r2, [%1], #8 \n\ + ldrd r4, [%1], #8 \n\ + mcr p15, 0, %0, c7, c6, 1 @ invalidate\n\ + strd r2, [%0], #8 \n\ + ldrd r2, [%1], #8 \n\ + strd r4, [%0], #8 \n\ + ldrd r4, [%1], #8 \n\ + strd r2, [%0], #8 \n\ + strd r4, [%0], #8 \n\ + ldrd r2, [%1], #8 \n\ + ldrd r4, [%1], #8 \n\ + mcr p15, 0, %0, c7, c6, 1 @ invalidate\n\ + strd r2, [%0], #8 \n\ + ldrd r2, [%1], #8 \n\ + subs %2, %2, #1 \n\ + strd r4, [%0], #8 \n\ + ldrd r4, [%1], #8 \n\ + strd r2, [%0], #8 \n\ + strd r4, [%0], #8 \n\ bgt 1b \n\ - beq 2b \n\ - \n\ - ldmfd sp!, {r4, r5, pc}" - : - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1)); + beq 2b " + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) + : "2" (PAGE_SIZE / 64 - 1) + : "r2", "r3", "r4", "r5"); } void xsc3_mc_copy_user_highpage(struct page *to, struct page *from, @@ -85,8 +78,6 @@ void xsc3_mc_copy_user_highpage(struct page *to, struct page *from, /* * XScale optimised clear_user_page - * r0 = destination - * r1 = virtual user address of ultimate destination page */ void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr) { diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 97972379f4d6..b0ae8c7acb48 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -36,52 +36,51 @@ static DEFINE_RAW_SPINLOCK(minicache_lock); * Dcache aliasing issue. The writes will be forwarded to the write buffer, * and merged as appropriate. */ -static void __naked -mc_copy_user_page(void *from, void *to) +static void mc_copy_user_page(void *from, void *to) { + int tmp; + /* * Strangely enough, best performance is achieved * when prefetching destination as well. (NP) */ - asm volatile( - "stmfd sp!, {r4, r5, lr} \n\ - mov lr, %2 \n\ - pld [r0, #0] \n\ - pld [r0, #32] \n\ - pld [r1, #0] \n\ - pld [r1, #32] \n\ -1: pld [r0, #64] \n\ - pld [r0, #96] \n\ - pld [r1, #64] \n\ - pld [r1, #96] \n\ -2: ldrd r2, [r0], #8 \n\ - ldrd r4, [r0], #8 \n\ - mov ip, r1 \n\ - strd r2, [r1], #8 \n\ - ldrd r2, [r0], #8 \n\ - strd r4, [r1], #8 \n\ - ldrd r4, [r0], #8 \n\ - strd r2, [r1], #8 \n\ - strd r4, [r1], #8 \n\ + asm volatile ("\ + pld [%0, #0] \n\ + pld [%0, #32] \n\ + pld [%1, #0] \n\ + pld [%1, #32] \n\ +1: pld [%0, #64] \n\ + pld [%0, #96] \n\ + pld [%1, #64] \n\ + pld [%1, #96] \n\ +2: ldrd r2, [%0], #8 \n\ + ldrd r4, [%0], #8 \n\ + mov ip, %1 \n\ + strd r2, [%1], #8 \n\ + ldrd r2, [%0], #8 \n\ + strd r4, [%1], #8 \n\ + ldrd r4, [%0], #8 \n\ + strd r2, [%1], #8 \n\ + strd r4, [%1], #8 \n\ mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ - ldrd r2, [r0], #8 \n\ + ldrd r2, [%0], #8 \n\ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ - ldrd r4, [r0], #8 \n\ - mov ip, r1 \n\ - strd r2, [r1], #8 \n\ - ldrd r2, [r0], #8 \n\ - strd r4, [r1], #8 \n\ - ldrd r4, [r0], #8 \n\ - strd r2, [r1], #8 \n\ - strd r4, [r1], #8 \n\ + ldrd r4, [%0], #8 \n\ + mov ip, %1 \n\ + strd r2, [%1], #8 \n\ + ldrd r2, [%0], #8 \n\ + strd r4, [%1], #8 \n\ + ldrd r4, [%0], #8 \n\ + strd r2, [%1], #8 \n\ + strd r4, [%1], #8 \n\ mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ - subs lr, lr, #1 \n\ + subs %2, %2, #1 \n\ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ bgt 1b \n\ - beq 2b \n\ - ldmfd sp!, {r4, r5, pc} " - : - : "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1)); + beq 2b " + : "+&r" (from), "+&r" (to), "=&r" (tmp) + : "2" (PAGE_SIZE / 64 - 1) + : "r2", "r3", "r4", "r5", "ip"); } void xscale_mc_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 6ea05aab9ed7..ec0317b24b13 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -149,7 +149,7 @@ __do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, show_pte(mm, addr); die("Oops", regs, fsr); bust_spinlocks(0); - do_exit(SIGKILL); + make_task_dead(SIGKILL); } /* diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4c417f3cbfd5..8073e7823c25 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -230,12 +230,14 @@ early_param("ecc", early_ecc); static int __init early_cachepolicy(char *p) { pr_warn("cachepolicy kernel parameter not supported without cp15\n"); + return 0; } early_param("cachepolicy", early_cachepolicy); static int __init noalign_setup(char *__unused) { pr_warn("noalign kernel parameter not supported without cp15\n"); + return 1; } __setup("noalign", noalign_setup); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 7d67c70bbded..46d2142ebd14 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -25,6 +25,13 @@ unsigned long vectors_base; +/* + * empty_zero_page is a special page that is used for + * zero-initialized data and COW. + */ +struct page *empty_zero_page; +EXPORT_SYMBOL(empty_zero_page); + #ifdef CONFIG_ARM_MPU struct mpu_rgn_info mpu_rgn_info; #endif @@ -147,9 +154,21 @@ void __init adjust_lowmem_bounds(void) */ void __init paging_init(const struct machine_desc *mdesc) { + void *zero_page; + early_trap_init((void *)vectors_base); mpu_setup(); + + /* allocate the zero page. */ + zero_page = (void *)memblock_alloc(PAGE_SIZE, PAGE_SIZE); + if (!zero_page) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", + __func__, PAGE_SIZE, PAGE_SIZE); + bootmem_init(); + + empty_zero_page = virt_to_page(zero_page); + flush_dcache_page(empty_zero_page); } /* diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 774ef1323554..4773490177c9 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -505,7 +505,7 @@ cpu_arm1020_name: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1020_proc_info,#object __arm1020_proc_info: diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index ae3c27b71594..928e8ca58f40 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -463,7 +463,7 @@ arm1020e_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1020e_proc_info,#object __arm1020e_proc_info: diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index dbb2413fe04d..385584c3d222 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -448,7 +448,7 @@ arm1022_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1022_proc_info,#object __arm1022_proc_info: diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 0b37b2cef9d3..29cc81857373 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -442,7 +442,7 @@ arm1026_crval: string cpu_arm1026_name, "ARM1026EJ-S" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1026_proc_info,#object __arm1026_proc_info: diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 3651cd70e418..c08cd1b0a1d0 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -186,7 +186,7 @@ arm720_crval: * See <asm/procinfo.h> for a definition of this structure. */ - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 024fb7732407..6eed87103b95 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -132,7 +132,7 @@ __arm740_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm740_proc_info,#object __arm740_proc_info: .long 0x41807400 diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 25472d94426d..beb64a7ccb38 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -76,7 +76,7 @@ __arm7tdmi_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \ extra_hwcaps=0 diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 7a14bd4414c9..5d4319708362 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -448,7 +448,7 @@ arm920_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm920_proc_info,#object __arm920_proc_info: diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index edccfcdcd551..7e22ca780b36 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -426,7 +426,7 @@ arm922_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm922_proc_info,#object __arm922_proc_info: diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 32a47cc19076..d343e77b8456 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -491,7 +491,7 @@ arm925_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index fb827c633693..8cf78c608c42 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -474,7 +474,7 @@ arm926_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm926_proc_info,#object __arm926_proc_info: diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index ee5b66f847c4..631ae64eeccd 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -344,7 +344,7 @@ __arm940_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm940_proc_info,#object __arm940_proc_info: diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 7361837edc31..033ad7402d67 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -399,7 +399,7 @@ __arm946_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm946_proc_info,#object __arm946_proc_info: .long 0x41009460 diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 7fac8c612134..2195468ccd76 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -70,7 +70,7 @@ __arm9tdmi_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req .type __\name\()_proc_info, #object diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 4001b73af4ee..fd3e5dd94e59 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -190,7 +190,7 @@ fa526_cr1_set: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __fa526_proc_info,#object __fa526_proc_info: diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 92e08bf37aad..685d324a74d3 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -584,7 +584,7 @@ feroceon_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 6f07d2ef4ff2..9182321a586a 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -429,7 +429,7 @@ mohawk_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __88sv331x_proc_info,#object __88sv331x_proc_info: diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index ee2ce496239f..093ad2ceff28 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -199,7 +199,7 @@ sa110_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __sa110_proc_info,#object __sa110_proc_info: diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 222d5836f666..12b8fcab4b59 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -242,7 +242,7 @@ sa1100_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 06d890a2342b..32f4df0915ef 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -264,7 +264,7 @@ v6_crval: string cpu_elf_name, "v6" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" /* * Match any ARMv6 processor core. diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c index a6554fdb56c5..e53f824a2583 100644 --- a/arch/arm/mm/proc-v7-bugs.c +++ b/arch/arm/mm/proc-v7-bugs.c @@ -7,8 +7,36 @@ #include <asm/cp15.h> #include <asm/cputype.h> #include <asm/proc-fns.h> +#include <asm/spectre.h> #include <asm/system_misc.h> +#ifdef CONFIG_ARM_PSCI +#define SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED 1 +static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void) +{ + struct arm_smccc_res res; + + arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, + ARM_SMCCC_ARCH_WORKAROUND_1, &res); + + switch ((int)res.a0) { + case SMCCC_RET_SUCCESS: + return SPECTRE_MITIGATED; + + case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED: + return SPECTRE_UNAFFECTED; + + default: + return SPECTRE_VULNERABLE; + } +} +#else +static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void) +{ + return SPECTRE_VULNERABLE; +} +#endif + #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR DEFINE_PER_CPU(harden_branch_predictor_fn_t, harden_branch_predictor_fn); @@ -37,13 +65,60 @@ static void __maybe_unused call_hvc_arch_workaround_1(void) arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL); } -static void cpu_v7_spectre_init(void) +static unsigned int spectre_v2_install_workaround(unsigned int method) { const char *spectre_v2_method = NULL; int cpu = smp_processor_id(); if (per_cpu(harden_branch_predictor_fn, cpu)) - return; + return SPECTRE_MITIGATED; + + switch (method) { + case SPECTRE_V2_METHOD_BPIALL: + per_cpu(harden_branch_predictor_fn, cpu) = + harden_branch_predictor_bpiall; + spectre_v2_method = "BPIALL"; + break; + + case SPECTRE_V2_METHOD_ICIALLU: + per_cpu(harden_branch_predictor_fn, cpu) = + harden_branch_predictor_iciallu; + spectre_v2_method = "ICIALLU"; + break; + + case SPECTRE_V2_METHOD_HVC: + per_cpu(harden_branch_predictor_fn, cpu) = + call_hvc_arch_workaround_1; + cpu_do_switch_mm = cpu_v7_hvc_switch_mm; + spectre_v2_method = "hypervisor"; + break; + + case SPECTRE_V2_METHOD_SMC: + per_cpu(harden_branch_predictor_fn, cpu) = + call_smc_arch_workaround_1; + cpu_do_switch_mm = cpu_v7_smc_switch_mm; + spectre_v2_method = "firmware"; + break; + } + + if (spectre_v2_method) + pr_info("CPU%u: Spectre v2: using %s workaround\n", + smp_processor_id(), spectre_v2_method); + + return SPECTRE_MITIGATED; +} +#else +static unsigned int spectre_v2_install_workaround(unsigned int method) +{ + pr_info_once("Spectre V2: workarounds disabled by configuration\n"); + + return SPECTRE_VULNERABLE; +} +#endif + +static void cpu_v7_spectre_v2_init(void) +{ + unsigned int state, method = 0; switch (read_cpuid_part()) { case ARM_CPU_PART_CORTEX_A8: @@ -52,32 +127,37 @@ static void cpu_v7_spectre_init(void) case ARM_CPU_PART_CORTEX_A17: case ARM_CPU_PART_CORTEX_A73: case ARM_CPU_PART_CORTEX_A75: - per_cpu(harden_branch_predictor_fn, cpu) = - harden_branch_predictor_bpiall; - spectre_v2_method = "BPIALL"; + state = SPECTRE_MITIGATED; + method = SPECTRE_V2_METHOD_BPIALL; break; case ARM_CPU_PART_CORTEX_A15: case ARM_CPU_PART_BRAHMA_B15: - per_cpu(harden_branch_predictor_fn, cpu) = - harden_branch_predictor_iciallu; - spectre_v2_method = "ICIALLU"; + state = SPECTRE_MITIGATED; + method = SPECTRE_V2_METHOD_ICIALLU; break; -#ifdef CONFIG_ARM_PSCI case ARM_CPU_PART_BRAHMA_B53: /* Requires no workaround */ + state = SPECTRE_UNAFFECTED; break; + default: /* Other ARM CPUs require no workaround */ - if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) + if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) { + state = SPECTRE_UNAFFECTED; break; + } /* fallthrough */ - /* Cortex A57/A72 require firmware workaround */ + /* Cortex A57/A72 require firmware workaround */ case ARM_CPU_PART_CORTEX_A57: case ARM_CPU_PART_CORTEX_A72: { struct arm_smccc_res res; + state = spectre_v2_get_cpu_fw_mitigation_state(); + if (state != SPECTRE_MITIGATED) + break; + if (psci_ops.smccc_version == SMCCC_VERSION_1_0) break; @@ -87,10 +167,7 @@ static void cpu_v7_spectre_init(void) ARM_SMCCC_ARCH_WORKAROUND_1, &res); if ((int)res.a0 != 0) break; - per_cpu(harden_branch_predictor_fn, cpu) = - call_hvc_arch_workaround_1; - cpu_do_switch_mm = cpu_v7_hvc_switch_mm; - spectre_v2_method = "hypervisor"; + method = SPECTRE_V2_METHOD_HVC; break; case PSCI_CONDUIT_SMC: @@ -98,29 +175,97 @@ static void cpu_v7_spectre_init(void) ARM_SMCCC_ARCH_WORKAROUND_1, &res); if ((int)res.a0 != 0) break; - per_cpu(harden_branch_predictor_fn, cpu) = - call_smc_arch_workaround_1; - cpu_do_switch_mm = cpu_v7_smc_switch_mm; - spectre_v2_method = "firmware"; + method = SPECTRE_V2_METHOD_SMC; break; default: + state = SPECTRE_VULNERABLE; break; } } -#endif } - if (spectre_v2_method) - pr_info("CPU%u: Spectre v2: using %s workaround\n", - smp_processor_id(), spectre_v2_method); + if (state == SPECTRE_MITIGATED) + state = spectre_v2_install_workaround(method); + + spectre_v2_update_state(state, method); +} + +#ifdef CONFIG_HARDEN_BRANCH_HISTORY +static int spectre_bhb_method; + +static const char *spectre_bhb_method_name(int method) +{ + switch (method) { + case SPECTRE_V2_METHOD_LOOP8: + return "loop"; + + case SPECTRE_V2_METHOD_BPIALL: + return "BPIALL"; + + default: + return "unknown"; + } +} + +static int spectre_bhb_install_workaround(int method) +{ + if (spectre_bhb_method != method) { + if (spectre_bhb_method) { + pr_err("CPU%u: Spectre BHB: method disagreement, system vulnerable\n", + smp_processor_id()); + + return SPECTRE_VULNERABLE; + } + + if (spectre_bhb_update_vectors(method) == SPECTRE_VULNERABLE) + return SPECTRE_VULNERABLE; + + spectre_bhb_method = method; + + pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n", + smp_processor_id(), spectre_bhb_method_name(method)); + } + + return SPECTRE_MITIGATED; } #else -static void cpu_v7_spectre_init(void) +static int spectre_bhb_install_workaround(int method) { + return SPECTRE_VULNERABLE; } #endif +static void cpu_v7_spectre_bhb_init(void) +{ + unsigned int state, method = 0; + + switch (read_cpuid_part()) { + case ARM_CPU_PART_CORTEX_A15: + case ARM_CPU_PART_BRAHMA_B15: + case ARM_CPU_PART_CORTEX_A57: + case ARM_CPU_PART_CORTEX_A72: + state = SPECTRE_MITIGATED; + method = SPECTRE_V2_METHOD_LOOP8; + break; + + case ARM_CPU_PART_CORTEX_A73: + case ARM_CPU_PART_CORTEX_A75: + state = SPECTRE_MITIGATED; + method = SPECTRE_V2_METHOD_BPIALL; + break; + + default: + state = SPECTRE_UNAFFECTED; + break; + } + + if (state == SPECTRE_MITIGATED) + state = spectre_bhb_install_workaround(method); + + spectre_v2_update_state(state, method); +} + static __maybe_unused bool cpu_v7_check_auxcr_set(bool *warned, u32 mask, const char *msg) { @@ -149,16 +294,18 @@ static bool check_spectre_auxcr(bool *warned, u32 bit) void cpu_v7_ca8_ibe(void) { if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(6))) - cpu_v7_spectre_init(); + cpu_v7_spectre_v2_init(); } void cpu_v7_ca15_ibe(void) { if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(0))) - cpu_v7_spectre_init(); + cpu_v7_spectre_v2_init(); + cpu_v7_spectre_bhb_init(); } void cpu_v7_bugs_init(void) { - cpu_v7_spectre_init(); + cpu_v7_spectre_v2_init(); + cpu_v7_spectre_bhb_init(); } diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 339eb17c9808..e351d682c2e3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -637,7 +637,7 @@ __v7_setup_stack: string cpu_elf_name, "v7" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" /* * Standard v7 proc info content diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index 9c2978c128d9..0be14b64879c 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin) ret lr ENDPROC(cpu_cm7_proc_fin) - .section ".init.text", #alloc, #execinstr + .section ".init.text", "ax" __v7m_cm7_setup: mov r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP) @@ -180,7 +180,7 @@ ENDPROC(__v7m_setup) string cpu_elf_name "v7m" string cpu_v7m_name "ARMv7-M" - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro __v7m_proc name, initfunc, cache_fns = nop_cache_fns, hwcaps = 0, proc_fns = v7m_processor_functions .long 0 /* proc_info_list.__cpu_mm_mmu_flags */ diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 293dcc2c441f..da96e4de1353 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -499,7 +499,7 @@ xsc3_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 3d75b7972fd1..c7800c69921b 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -613,7 +613,7 @@ xscale_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache .type __\name\()_proc_info,#object diff --git a/arch/arm/nwfpe/Makefile b/arch/arm/nwfpe/Makefile index 303400fa2cdf..2aec85ab1e8b 100644 --- a/arch/arm/nwfpe/Makefile +++ b/arch/arm/nwfpe/Makefile @@ -11,3 +11,9 @@ nwfpe-y += fpa11.o fpa11_cpdo.o fpa11_cpdt.o \ entry.o nwfpe-$(CONFIG_FPE_NWFPE_XP) += extended_cpdo.o + +# Try really hard to avoid generating calls to __aeabi_uldivmod() from +# float64_rem() due to loop elision. +ifdef CONFIG_CC_IS_CLANG +CFLAGS_softfloat.o += -mllvm -replexitval=never +endif diff --git a/arch/arm/probes/decode.h b/arch/arm/probes/decode.h index 548d622a3159..81360638d188 100644 --- a/arch/arm/probes/decode.h +++ b/arch/arm/probes/decode.h @@ -22,6 +22,7 @@ #include <linux/types.h> #include <linux/stddef.h> #include <asm/probes.h> +#include <asm/ptrace.h> #include <asm/kprobes.h> void __init arm_probes_decode_init(void); @@ -43,31 +44,6 @@ void __init find_str_pc_offset(void); #endif -/* - * Update ITSTATE after normal execution of an IT block instruction. - * - * The 8 IT state bits are split into two parts in CPSR: - * ITSTATE<1:0> are in CPSR<26:25> - * ITSTATE<7:2> are in CPSR<15:10> - */ -static inline unsigned long it_advance(unsigned long cpsr) - { - if ((cpsr & 0x06000400) == 0) { - /* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */ - cpsr &= ~PSR_IT_MASK; - } else { - /* We need to shift left ITSTATE<4:0> */ - const unsigned long mask = 0x06001c00; /* Mask ITSTATE<4:0> */ - unsigned long it = cpsr & mask; - it <<= 1; - it |= it >> (27 - 10); /* Carry ITSTATE<2> to correct place */ - it &= mask; - cpsr &= ~mask; - cpsr |= it; - } - return cpsr; -} - static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs) { long cpsr = regs->ARM_cpsr; diff --git a/arch/arm/probes/kprobes/checkers-common.c b/arch/arm/probes/kprobes/checkers-common.c index 971119c29474..aa10e5e46ebb 100644 --- a/arch/arm/probes/kprobes/checkers-common.c +++ b/arch/arm/probes/kprobes/checkers-common.c @@ -48,7 +48,7 @@ enum probes_insn checker_stack_use_imm_0xx(probes_opcode_t insn, * Different from other insn uses imm8, the real addressing offset of * STRD in T32 encoding should be imm8 * 4. See ARMARM description. */ -enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn, +static enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn, struct arch_probes_insn *asi, const struct decode_header *h) { diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c index 62da8e2211e4..0a7090a65bca 100644 --- a/arch/arm/probes/kprobes/core.c +++ b/arch/arm/probes/kprobes/core.c @@ -239,7 +239,7 @@ singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) * kprobe, and that level is reserved for user kprobe handlers, so we can't * risk encountering a new kprobe in an interrupt handler. */ -void __kprobes kprobe_handler(struct pt_regs *regs) +static void __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p, *cur; struct kprobe_ctlblk *kcb; diff --git a/arch/arm/probes/kprobes/opt-arm.c b/arch/arm/probes/kprobes/opt-arm.c index cf08cb726767..1516c340a076 100644 --- a/arch/arm/probes/kprobes/opt-arm.c +++ b/arch/arm/probes/kprobes/opt-arm.c @@ -158,8 +158,6 @@ __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty) } } -extern void kprobe_handler(struct pt_regs *regs); - static void optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) { diff --git a/arch/arm/probes/kprobes/test-core.c b/arch/arm/probes/kprobes/test-core.c index cc237fa9b90f..1c86c5d980c5 100644 --- a/arch/arm/probes/kprobes/test-core.c +++ b/arch/arm/probes/kprobes/test-core.c @@ -723,7 +723,7 @@ static const char coverage_register_lookup[16] = { [REG_TYPE_NOSPPCX] = COVERAGE_ANY_REG | COVERAGE_SP, }; -unsigned coverage_start_registers(const struct decode_header *h) +static unsigned coverage_start_registers(const struct decode_header *h) { unsigned regs = 0; int i; diff --git a/arch/arm/probes/kprobes/test-core.h b/arch/arm/probes/kprobes/test-core.h index 94285203e9f7..459ebda07713 100644 --- a/arch/arm/probes/kprobes/test-core.h +++ b/arch/arm/probes/kprobes/test-core.h @@ -456,3 +456,7 @@ void kprobe_thumb32_test_cases(void); #else void kprobe_arm_test_cases(void); #endif + +void __kprobes_test_case_start(void); +void __kprobes_test_case_end_16(void); +void __kprobes_test_case_end_32(void); diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index dd946c77e801..1623bfab4513 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -388,7 +388,8 @@ static int __init xen_guest_init(void) * for secondary CPUs as they are brought up. * For uniformity we use VCPUOP_register_vcpu_info even on cpu0. */ - xen_vcpu_info = alloc_percpu(struct vcpu_info); + xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info), + 1 << fls(sizeof(struct vcpu_info) - 1)); if (xen_vcpu_info == NULL) return -ENOMEM; diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 8a8a388549e7..e04b5044f597 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -61,11 +61,12 @@ out: unsigned long __pfn_to_mfn(unsigned long pfn) { - struct rb_node *n = phys_to_mach.rb_node; + struct rb_node *n; struct xen_p2m_entry *entry; unsigned long irqflags; read_lock_irqsave(&p2m_lock, irqflags); + n = phys_to_mach.rb_node; while (n) { entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys); if (entry->pfn <= pfn && @@ -151,10 +152,11 @@ bool __set_phys_to_machine_multi(unsigned long pfn, int rc; unsigned long irqflags; struct xen_p2m_entry *p2m_entry; - struct rb_node *n = phys_to_mach.rb_node; + struct rb_node *n; if (mfn == INVALID_P2M_ENTRY) { write_lock_irqsave(&p2m_lock, irqflags); + n = phys_to_mach.rb_node; while (n) { p2m_entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys); if (p2m_entry->pfn <= pfn && |