diff options
Diffstat (limited to 'arch/arm64/boot')
46 files changed, 824 insertions, 733 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index a0db02504b69..963a7c505e30 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -78,7 +78,7 @@ leds { compatible = "gpio-leds"; - status { + led-0 { label = "orangepi:green:status"; gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 2c8c2b322c72..33f1fb9fd161 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -129,7 +129,7 @@ status = "okay"; clock-frequency = <100000>; i2c-sda-falling-time-ns = <890>; /* hcnt */ - i2c-sdl-falling-time-ns = <890>; /* lcnt */ + i2c-scl-falling-time-ns = <890>; /* lcnt */ adc@14 { compatible = "lltc,ltc2497"; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 502c4ac45c29..72255898081c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -150,7 +150,7 @@ scpi_clocks: clocks { compatible = "arm,scpi-clocks"; - scpi_dvfs: clock-controller { + scpi_dvfs: clocks-0 { compatible = "arm,scpi-dvfs-clocks"; #clock-cells = <1>; clock-indices = <0>; @@ -159,7 +159,7 @@ }; scpi_sensors: sensors { - compatible = "amlogic,meson-gxbb-scpi-sensors"; + compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; #thermal-sensor-cells = <1>; }; }; @@ -1705,7 +1705,7 @@ sd_emmc_b: sd@5000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0x5000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, @@ -1717,7 +1717,7 @@ sd_emmc_c: mmc@7000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0x7000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_SD_EMMC_C_CLK0>, diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index d2d255a988a8..a31b623fedb7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1376,10 +1376,9 @@ dmc: bus@38000 { compatible = "simple-bus"; - reg = <0x0 0x38000 0x0 0x400>; #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; + ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>; canvas: video-lut@48 { compatible = "amlogic,canvas"; @@ -1783,7 +1782,7 @@ #address-cells = <1>; #size-cells = <0>; - internal_ephy: ethernet_phy@8 { + internal_ephy: ethernet-phy@8 { compatible = "ethernet-phy-id0180.3301", "ethernet-phy-ieee802.3-c22"; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; @@ -2317,7 +2316,7 @@ sd_emmc_a: sd@ffe03000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe03000 0x0 0x800>; - interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_A>, <&clkc CLKID_SD_EMMC_A_CLK0>, @@ -2329,7 +2328,7 @@ sd_emmc_b: sd@ffe05000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe05000 0x0 0x800>; - interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, @@ -2341,7 +2340,7 @@ sd_emmc_c: mmc@ffe07000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe07000 0x0 0x800>; - interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_SD_EMMC_C_CLK0>, diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index eb5d177d7a99..c8c438c0b429 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -54,26 +54,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <731000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <731000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi index d61f43052a34..8e9ad1e51d66 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi @@ -11,26 +11,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <761000>; @@ -71,26 +51,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <731000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi index 046cc332d07f..f2543da63c39 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi @@ -11,26 +11,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <731000>; @@ -71,26 +51,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <751000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <751000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <751000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <751000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <771000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index ad7bc0eec668..e9f9ddd27ad7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -172,7 +172,7 @@ reg = <0x14 0x10>; }; - eth_mac: eth_mac@34 { + eth_mac: eth-mac@34 { reg = <0x34 0x10>; }; @@ -189,7 +189,7 @@ scpi_clocks: clocks { compatible = "arm,scpi-clocks"; - scpi_dvfs: scpi_clocks@0 { + scpi_dvfs: clocks-0 { compatible = "arm,scpi-dvfs-clocks"; #clock-cells = <1>; clock-indices = <0>; @@ -464,7 +464,7 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; - hwrng: rng { + hwrng: rng@0 { compatible = "amlogic,meson-rng"; reg = <0x0 0x0 0x0 0x4>; }; @@ -528,21 +528,21 @@ sd_emmc_a: mmc@70000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; reg = <0x0 0x70000 0x0 0x800>; - interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sd_emmc_b: mmc@72000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; reg = <0x0 0x72000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sd_emmc_c: mmc@74000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; reg = <0x0 0x74000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts index b5667f1fb2c8..22fb3e324da5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts @@ -18,7 +18,7 @@ leds { compatible = "gpio-leds"; - status { + led { label = "n1:white:status"; gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index e3cfa24dca5a..6809f495a503 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -700,7 +700,7 @@ }; }; - eth-phy-mux { + eth-phy-mux@55c { compatible = "mdio-mux-mmioreg", "mdio-mux"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 8ba3555ca369..dd62a608c805 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -55,26 +55,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <730000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <730000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <730000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <750000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <770000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h index 93b44efdbc52..35a60b0d3a4f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h @@ -585,7 +585,7 @@ #define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0 #define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24 0x234 0x49C 0x000 0x7 0x0 #define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0 -#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x0 +#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x1 #define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0 #define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0 #define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25 0x238 0x4A0 0x000 0x7 0x0 diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 7b178a77cc71..304399686c5a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -838,10 +838,10 @@ clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; }; - gpmi: nand-controller@33002000{ + gpmi: nand-controller@33002000 { compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 9ad1d43b8ce7..4fa39654b695 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -213,6 +213,10 @@ interrupts = <3 GPIO_ACTIVE_LOW>; rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + regulators { buck1_reg: BUCK1 { regulator-name = "BUCK1"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 546511b373d4..31c017736a05 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -695,7 +695,7 @@ gpmi: nand-controller@33002000 { compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 2e8239d489f8..c46b82e2297c 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -122,9 +122,12 @@ /delete-property/ mrvl,i2c-fast-mode; status = "okay"; + /* MCP7940MT-I/MNY RTC */ rtc@6f { compatible = "microchip,mcp7940x"; reg = <0x6f>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */ }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index 2b91daf5c1a6..99515c13da3c 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -26,14 +26,14 @@ stdout-path = "serial0:921600n8"; }; - cpus_fixed_vproc0: fixedregulator@0 { + cpus_fixed_vproc0: regulator-vproc-buck0 { compatible = "regulator-fixed"; regulator-name = "vproc_buck0"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; - cpus_fixed_vproc1: fixedregulator@1 { + cpus_fixed_vproc1: regulator-vproc-buck1 { compatible = "regulator-fixed"; regulator-name = "vproc_buck1"; regulator-min-microvolt = <1000000>; @@ -50,7 +50,7 @@ id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>; }; - usb_p0_vbus: regulator@2 { + usb_p0_vbus: regulator-usb-p0-vbus { compatible = "regulator-fixed"; regulator-name = "p0_vbus"; regulator-min-microvolt = <5000000>; @@ -59,7 +59,7 @@ enable-active-high; }; - usb_p1_vbus: regulator@3 { + usb_p1_vbus: regulator-usb-p1-vbus { compatible = "regulator-fixed"; regulator-name = "p1_vbus"; regulator-min-microvolt = <5000000>; @@ -68,7 +68,7 @@ enable-active-high; }; - usb_p2_vbus: regulator@4 { + usb_p2_vbus: regulator-usb-p2-vbus { compatible = "regulator-fixed"; regulator-name = "p2_vbus"; regulator-min-microvolt = <5000000>; @@ -77,7 +77,7 @@ enable-active-high; }; - usb_p3_vbus: regulator@5 { + usb_p3_vbus: regulator-usb-p3-vbus { compatible = "regulator-fixed"; regulator-name = "p3_vbus"; regulator-min-microvolt = <5000000>; @@ -105,15 +105,89 @@ proc-supply = <&cpus_fixed_vproc1>; }; +ð { + phy-mode ="rgmii-rxid"; + phy-handle = <ðernet_phy0>; + mediatek,tx-delay-ps = <1530>; + snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default>; + pinctrl-1 = <ð_sleep>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ethernet_phy0: ethernet-phy@5 { + compatible = "ethernet-phy-id0243.0d90"; + reg = <0x5>; + }; + }; +}; + &pio { - usb0_id_pins_float: usb0_iddig { + eth_default: eth-default-pins { + tx_pins { + pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>, + <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>, + <MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1>, + <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>, + <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>, + <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>; + drive-strength = <MTK_DRIVE_8mA>; + }; + rx_pins { + pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>, + <MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2>, + <MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1>, + <MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0>, + <MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV>, + <MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC>; + input-enable; + }; + mdio_pins { + pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>, + <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>; + drive-strength = <MTK_DRIVE_8mA>; + input-enable; + }; + }; + + eth_sleep: eth-sleep-pins { + tx_pins { + pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>, + <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>, + <MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73>, + <MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74>, + <MT2712_PIN_75_GBE_TXC__FUNC_GPIO75>, + <MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76>; + }; + rx_pins { + pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78>, + <MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79>, + <MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80>, + <MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81>, + <MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82>, + <MT2712_PIN_84_GBE_RXC__FUNC_GPIO84>; + input-disable; + }; + mdio_pins { + pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GPIO85>, + <MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86>; + input-disable; + bias-disable; + }; + }; + + usb0_id_pins_float: usb0-iddig-pins { pins_iddig { pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>; bias-pull-up; }; }; - usb1_id_pins_float: usb1_iddig { + usb1_id_pins_float: usb1-iddig-pins { pins_iddig { pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>; bias-pull-up; diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 43307bad3f0d..2c20a1be0699 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -160,70 +160,70 @@ #clock-cells = <0>; }; - clk26m: oscillator@0 { + clk26m: oscillator-26m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; clock-output-names = "clk26m"; }; - clk32k: oscillator@1 { + clk32k: oscillator-32k { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "clk32k"; }; - clkfpc: oscillator@2 { + clkfpc: oscillator-50m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; clock-output-names = "clkfpc"; }; - clkaud_ext_i_0: oscillator@3 { + clkaud_ext_i_0: oscillator-aud0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <6500000>; clock-output-names = "clkaud_ext_i_0"; }; - clkaud_ext_i_1: oscillator@4 { + clkaud_ext_i_1: oscillator-aud1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <196608000>; clock-output-names = "clkaud_ext_i_1"; }; - clkaud_ext_i_2: oscillator@5 { + clkaud_ext_i_2: oscillator-aud2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <180633600>; clock-output-names = "clkaud_ext_i_2"; }; - clki2si0_mck_i: oscillator@6 { + clki2si0_mck_i: oscillator-i2s0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si0_mck_i"; }; - clki2si1_mck_i: oscillator@7 { + clki2si1_mck_i: oscillator-i2s1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si1_mck_i"; }; - clki2si2_mck_i: oscillator@8 { + clki2si2_mck_i: oscillator-i2s2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si2_mck_i"; }; - clktdmin_mclk_i: oscillator@9 { + clktdmin_mclk_i: oscillator-mclk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; @@ -249,10 +249,11 @@ #clock-cells = <1>; }; - infracfg: syscon@10001000 { + infracfg: clock-controller@10001000 { compatible = "mediatek,mt2712-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; pericfg: syscon@10003000 { @@ -266,7 +267,7 @@ reg = <0 0x10005000 0 0x1000>; }; - pio: pinctrl@10005000 { + pio: pinctrl@1000b000 { compatible = "mediatek,mt2712-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>; @@ -632,6 +633,71 @@ status = "disabled"; }; + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,priority = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <3>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + queue1 { + snps,weight = <0x11>; + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + queue2 { + snps,weight = <0x12>; + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + }; + + eth: ethernet@1101c000 { + compatible = "mediatek,mt2712-gmac"; + reg = <0 0x1101c000 0 0x1300>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "macirq"; + mac-address = [00 55 7b b5 7d f7]; + clock-names = "axi", + "apb", + "mac_main", + "ptp_ref"; + clocks = <&pericfg CLK_PERI_GMAC>, + <&pericfg CLK_PERI_GMAC_PCLK>, + <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>; + assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>, + <&topckgen CLK_TOP_APLL1_D3>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>; + mediatek,pericfg = <&pericfg>; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,txpbl = <1>; + snps,rxpbl = <1>; + clk_csr = <0>; + status = "disabled"; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt2712-mmc"; reg = <0 0x11230000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi index 2b2a69c7567f..d4c78c9672ff 100644 --- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi @@ -102,7 +102,7 @@ }; }; - clk26m: oscillator@0 { + clk26m: oscillator-26m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 83e10591e0e5..eec9ec1db682 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -49,7 +49,7 @@ wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; - gpios = <&pio 102 GPIO_ACTIVE_HIGH>; + gpios = <&pio 102 GPIO_ACTIVE_LOW>; }; }; @@ -69,8 +69,9 @@ }; }; - memory { + memory@40000000 { reg = <0 0x40000000 0 0x40000000>; + device_type = "memory"; }; reg_1p8v: regulator-1p8v { diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index 3f783348c66a..ee57fccd489a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -55,8 +55,9 @@ }; }; - memory { + memory@40000000 { reg = <0 0x40000000 0 0x20000000>; + device_type = "memory"; }; reg_1p8v: regulator-1p8v { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index e7e002d8b108..122ff44a092e 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -244,7 +244,7 @@ clock-names = "hif_sel"; }; - cir: cir@10009000 { + cir: ir-receiver@10009000 { compatible = "mediatek,mt7622-cir"; reg = <0 0x10009000 0 0x1000>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>; @@ -428,6 +428,7 @@ pwm: pwm@11006000 { compatible = "mediatek,mt7622-pwm"; reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>; clocks = <&topckgen CLK_TOP_PWM_SEL>, <&pericfg CLK_PERI_PWM_PD>, @@ -506,7 +507,6 @@ <&pericfg CLK_PERI_AUXADC_PD>; clock-names = "therm", "auxadc"; resets = <&pericfg MT7622_PERI_THERM_SW_RST>; - reset-names = "therm"; mediatek,auxadc = <&auxadc>; mediatek,apmixedsys = <&apmixedsys>; nvmem-cells = <&thermal_calibration>; @@ -900,9 +900,7 @@ }; eth: ethernet@1b100000 { - compatible = "mediatek,mt7622-eth", - "mediatek,mt2701-eth", - "syscon"; + compatible = "mediatek,mt7622-eth"; reg = <0 0x1b100000 0 0x20000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 6dffada2e66b..2b66afcf026e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -43,7 +43,7 @@ id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>; }; - usb_p1_vbus: regulator@0 { + usb_p1_vbus: regulator-usb-p1 { compatible = "regulator-fixed"; regulator-name = "usb_vbus"; regulator-min-microvolt = <5000000>; @@ -52,7 +52,7 @@ enable-active-high; }; - usb_p0_vbus: regulator@1 { + usb_p0_vbus: regulator-usb-p0 { compatible = "regulator-fixed"; regulator-name = "vbus"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index dba3488492f1..21e029afb27b 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -77,425 +77,427 @@ enable-gpios = <&pm8994_gpios 15 0>; }; }; +}; - soc { - serial@7570000 { - label = "BT-UART"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart1_default>; - pinctrl-1 = <&blsp1_uart1_sleep>; +&blsp1_uart1 { + label = "BT-UART"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; - bluetooth { - compatible = "qcom,qca6174-bt"; + bluetooth { + compatible = "qcom,qca6174-bt"; - /* bt_disable_n gpio */ - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - clocks = <&divclk4>; - }; - }; + clocks = <&divclk4>; + }; +}; - serial@75b0000 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart1_2pins_default>; - pinctrl-1 = <&blsp2_uart1_2pins_sleep>; - }; +&blsp2_uart1 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_2pins_default>; + pinctrl-1 = <&blsp2_uart1_2pins_sleep>; +}; - serial@75b1000 { - label = "LS-UART0"; - status = "disabled"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_4pins_default>; - pinctrl-1 = <&blsp2_uart2_4pins_sleep>; - }; +&blsp2_uart2 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_4pins_default>; + pinctrl-1 = <&blsp2_uart2_4pins_sleep>; +}; - i2c@7577000 { - /* On Low speed expansion */ - label = "LS-I2C0"; - status = "okay"; - }; +&blsp1_i2c2 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; - i2c@75b6000 { - /* On Low speed expansion */ - label = "LS-I2C1"; - status = "okay"; - }; +&blsp2_i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; - spi@7575000 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; - }; +&blsp1_spi0 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; - i2c@75b5000 { - /* On High speed expansion */ - label = "HS-I2C2"; - status = "okay"; - }; +&blsp2_i2c0 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; - spi@75ba000{ - /* On High speed expansion */ - label = "HS-SPI1"; - status = "okay"; - }; +&blsp2_spi5 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; - sdhci@74a4900 { - /* External SD card */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 0x1>; - vmmc-supply = <&pm8994_l21>; - vqmmc-supply = <&pm8994_l13>; - status = "okay"; - }; +&camss { + vdda-supply = <&pm8994_l2>; +}; - phy@627000 { - status = "okay"; - }; +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + cd-gpios = <&msmgpio 38 0x1>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; + status = "okay"; +}; - ufshc@624000 { - status = "okay"; - }; +&ufsphy { + status = "okay"; - pinctrl@1010000 { - gpio-line-names = - "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ - "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ - "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ - "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ - "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ - "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ - "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ - "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ - "TP93", /* GPIO_9 */ - "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ - "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ - "NC", /* GPIO_12 */ - "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ - "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ - "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ - "TP99", /* GPIO_16 */ - "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ - "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ - "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ - "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ - "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ - "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ - "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ - "GPIO-D", /* GPIO_24, LSEC pin 26 */ - "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ - "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ - "BLSP6_I2C_SDA", /* GPIO_27 */ - "BLSP6_I2C_SCL", /* GPIO_28 */ - "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ - "GPIO30", /* GPIO_30, S HSEC pin 4 */ - "HDMI_CEC", /* GPIO_31 */ - "HDMI_DDC_CLOCK", /* GPIO_32 */ - "HDMI_DDC_DATA", /* GPIO_33 */ - "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ - "PCIE0_RST_N", /* GPIO_35 */ - "PCIE0_CLKREQ_N", /* GPIO_36 */ - "PCIE0_WAKE", /* GPIO_37 */ - "SD_CARD_DET_N", /* GPIO_38 */ - "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ - "W_DISABLE_N", /* GPIO_40 */ - "[BLSP9_UART_TX]", /* GPIO_41 */ - "[BLSP9_UART_RX]", /* GPIO_42 */ - "[BLSP2_UART_CTS_N]", /* GPIO_43 */ - "[BLSP2_UART_RFR_N]", /* GPIO_44 */ - "[BLSP3_UART_TX]", /* GPIO_45 */ - "[BLSP3_UART_RX]", /* GPIO_46 */ - "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ - "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ - "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ - "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ - "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ - "[CODEC_INT1_N]", /* GPIO_53 */ - "[CODEC_INT2_N]", /* GPIO_54 */ - "[BLSP7_I2C_SDA]", /* GPIO_55 */ - "[BLSP7_I2C_SCL]", /* GPIO_56 */ - "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ - "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ - "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ - "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ - "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ - "GPIO-E", /* GPIO_62, LSEC pin 27 */ - "TP87", /* GPIO_63 */ - "[CODEC_RST_N]", /* GPIO_64 */ - "[PCM1_CLK]", /* GPIO_65 */ - "[PCM1_SYNC]", /* GPIO_66 */ - "[PCM1_DIN]", /* GPIO_67 */ - "[PCM1_DOUT]", /* GPIO_68 */ - "AUDIO_REF_CLK", /* GPIO_69 */ - "SLIMBUS_CLK", /* GPIO_70 */ - "SLIMBUS_DATA0", /* GPIO_71 */ - "SLIMBUS_DATA1", /* GPIO_72 */ - "NC", /* GPIO_73 */ - "NC", /* GPIO_74 */ - "NC", /* GPIO_75 */ - "NC", /* GPIO_76 */ - "TP94", /* GPIO_77 */ - "NC", /* GPIO_78 */ - "TP95", /* GPIO_79 */ - "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ - "TP88", /* GPIO_81 */ - "TP89", /* GPIO_82 */ - "TP90", /* GPIO_83 */ - "TP91", /* GPIO_84 */ - "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ - "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ - "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ - "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ - "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ - "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ - "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ - "NC", /* GPIO_92 */ - "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ - "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ - "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ - "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ - "NC", /* GPIO_97 */ - "CAM1_STANDBY_N", /* GPIO_98 */ - "NC", /* GPIO_99 */ - "NC", /* GPIO_100 */ - "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ - "BOOT_CONFIG1", /* GPIO_102 */ - "USB_HUB_RESET", /* GPIO_103 */ - "CAM1_RST_N", /* GPIO_104 */ - "NC", /* GPIO_105 */ - "NC", /* GPIO_106 */ - "NC", /* GPIO_107 */ - "NC", /* GPIO_108 */ - "NC", /* GPIO_109 */ - "NC", /* GPIO_110 */ - "NC", /* GPIO_111 */ - "NC", /* GPIO_112 */ - "PMI8994_BUA", /* GPIO_113 */ - "PCIE2_RST_N", /* GPIO_114 */ - "PCIE2_CLKREQ_N", /* GPIO_115 */ - "PCIE2_WAKE", /* GPIO_116 */ - "SSC_IRQ_0", /* GPIO_117 */ - "SSC_IRQ_1", /* GPIO_118 */ - "SSC_IRQ_2", /* GPIO_119 */ - "NC", /* GPIO_120 */ - "GPIO121", /* GPIO_121, S HSEC pin 2 */ - "NC", /* GPIO_122 */ - "SSC_IRQ_6", /* GPIO_123 */ - "SSC_IRQ_7", /* GPIO_124 */ - "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ - "BOOT_CONFIG5", /* GPIO_126 */ - "NC", /* GPIO_127 */ - "NC", /* GPIO_128 */ - "BOOT_CONFIG7", /* GPIO_129 */ - "PCIE1_RST_N", /* GPIO_130 */ - "PCIE1_CLKREQ_N", /* GPIO_131 */ - "PCIE1_WAKE", /* GPIO_132 */ - "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ - "NC", /* GPIO_134 */ - "NC", /* GPIO_135 */ - "BOOT_CONFIG8", /* GPIO_136 */ - "NC", /* GPIO_137 */ - "NC", /* GPIO_138 */ - "GPS_SSBI2", /* GPIO_139 */ - "GPS_SSBI1", /* GPIO_140 */ - "NC", /* GPIO_141 */ - "NC", /* GPIO_142 */ - "NC", /* GPIO_143 */ - "BOOT_CONFIG6", /* GPIO_144 */ - "NC", /* GPIO_145 */ - "NC", /* GPIO_146 */ - "NC", /* GPIO_147 */ - "NC", /* GPIO_148 */ - "NC"; /* GPIO_149 */ - }; + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; - qcom,spmi@400f000 { - pmic@0 { - gpios@c000 { - gpio-line-names = - "NC", - "KEY_VOLP_N", - "NC", - "BL1_PWM", - "GPIO-F", /* BL0_PWM, LSEC pin 28 */ - "BL1_EN", - "NC", - "WLAN_EN", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "DIVCLK1", - "DIVCLK2", - "DIVCLK3", - "DIVCLK4", - "BT_EN", - "PMIC_SLB", - "PMIC_BUA", - "USB_VBUS_DET"; - }; - - mpps@a000 { - gpio-line-names = - "VDDPX_BIAS", - "WIFI_LED", - "NC", - "BT_LED", - "PM_MPP05", - "PM_MPP06", - "PM_MPP07", - "NC"; - }; - }; + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; - pmic@2 { - gpios@c000 { - gpio-line-names = - "NC", - "SPKR_AMP_EN1", - "SPKR_AMP_EN2", - "TP61", - "NC", - "USB2_VBUS_DET", - "NC", - "NC", - "NC", - "NC"; - }; - }; - }; + vddp-ref-clk-supply = <&pm8994_l25>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; - phy@34000 { - status = "okay"; - }; +&ufshc { + status = "okay"; - phy@7410000 { - status = "okay"; - }; + vcc-supply = <&pm8994_l20>; + vccq-supply = <&pm8994_l25>; + vccq2-supply = <&pm8994_s4>; - phy@7411000 { - status = "okay"; - }; + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; - phy@7412000 { - status = "okay"; - }; +&msmgpio { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ +}; - usb@6af8800 { - status = "okay"; - extcon = <&usb3_id>; +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; +}; - dwc3@6a00000 { - extcon = <&usb3_id>; - dr_mode = "otg"; - }; - }; +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; - usb3_id: usb3-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_det_gpio>; - }; +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; +}; - usb@76f8800 { - status = "okay"; - extcon = <&usb2_id>; +&pcie_phy { + status = "okay"; - dwc3@7600000 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; - }; - }; + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; +}; - usb2_id: usb2-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_det_gpio>; - }; +&usb3phy { + status = "okay"; - wlan_en: wlan-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; - gpio = <&pm8994_gpios 8 0>; +}; - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; +&hsusb_phy1 { + status = "okay"; - agnoc@0 { - pcie@600000 { - status = "okay"; - perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&wlan_en>; - }; + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; +}; - pcie@608000 { - status = "okay"; - perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; - }; +&hsusb_phy2 { + status = "okay"; - pcie@610000 { - status = "okay"; - perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; - }; - }; + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; +}; - slim_msm: slim@91c0000 { - ngd@1 { - wcd9335: codec@1{ - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - }; - }; - }; +&usb3 { + status = "okay"; + extcon = <&usb3_id>; - mdss@900000 { - status = "okay"; + dwc3@6a00000 { + extcon = <&usb3_id>; + dr_mode = "otg"; + }; +}; - mdp@901000 { - status = "okay"; - }; +&usb2 { + status = "okay"; + extcon = <&usb2_id>; - hdmi-phy@9a0600 { - status = "okay"; + dwc3@7600000 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; + }; +}; - vddio-supply = <&pm8994_l12>; - vcca-supply = <&pm8994_l28>; - #phy-cells = <0>; - }; +&pcie0 { + status = "okay"; + perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&pm8994_l28>; +}; - hdmi-tx@9a0000 { - status = "okay"; +&pcie1 { + status = "okay"; + perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&pm8994_l28>; +}; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; +&pcie2 { + status = "okay"; + perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&pm8994_l28>; +}; - core-vdda-supply = <&pm8994_l12>; - core-vcc-supply = <&pm8994_s4>; - }; - }; - }; +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + vdd-buck-supply = <&pm8994_s4>; + vdd-buck-sido-supply = <&pm8994_s4>; + vdd-tx-supply = <&pm8994_s4>; + vdd-rx-supply = <&pm8994_s4>; + vdd-io-supply = <&pm8994_s4>; +}; + +&mdss { + status = "okay"; +}; + +&mdp { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; + + vddio-supply = <&pm8994_l12>; + vcca-supply = <&pm8994_l28>; + #phy-cells = <0>; +}; + +&hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&pm8994_l12>; + core-vcc-supply = <&pm8994_s4>; +}; +/ { gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -667,6 +669,35 @@ }; }; }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; }; &spmi_bus { diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 67ee5f560104..1e9fa049c550 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -253,7 +253,7 @@ status = "disabled"; }; - qpic_nand: nand@79b0000 { + qpic_nand: nand-controller@79b0000 { compatible = "qcom,ipq8074-nand"; reg = <0x79b0000 0x10000>; #address-cells = <1>; @@ -482,7 +482,7 @@ clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32768>; #clock-cells = <0>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 301c1c467c0b..e1097ba6c948 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1097,8 +1097,8 @@ vddmx-supply = <&pm8916_l3>; vddpx-supply = <&pm8916_l7>; - qcom,state = <&wcnss_smp2p_out 0>; - qcom,state-names = "stop"; + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; pinctrl-names = "default"; pinctrl-0 = <&wcnss_pin_a>; @@ -1451,7 +1451,7 @@ }; }; - camss: camss@1b00000 { + camss: camss@1b0ac00 { compatible = "qcom,msm8916-camss"; reg = <0x1b0ac00 0x200>, <0x1b00030 0x4>, diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index f1d3c51ea8d0..8bfb897b0e81 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -433,6 +433,19 @@ }; }; + etm { + compatible = "qcom,coresight-remote-etm"; + + out-ports { + port { + modem_etm_out_funnel_in2: endpoint { + remote-endpoint = + <&funnel_in2_in_modem_etm>; + }; + }; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -571,7 +584,7 @@ rpm_msg_ram: memory@68000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x68000 0x6000>; + reg = <0x00068000 0x6000>; }; rng: rng@83000 { @@ -583,28 +596,28 @@ tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; - reg = <0x740000 0x20000>; + reg = <0x00740000 0x20000>; }; tsens0: thermal-sensor@4a9000 { compatible = "qcom,msm8996-tsens"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; #thermal-sensor-cells = <1>; }; tsens1: thermal-sensor@4ad000 { compatible = "qcom,msm8996-tsens"; - reg = <0x4ad000 0x1000>, /* TM */ - <0x4ac000 0x1000>; /* SROT */ + reg = <0x004ad000 0x1000>, /* TM */ + <0x004ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; #thermal-sensor-cells = <1>; }; tcsr: syscon@7a0000 { compatible = "qcom,tcsr-msm8996", "syscon"; - reg = <0x7a0000 0x18000>; + reg = <0x007a0000 0x18000>; }; intc: interrupt-controller@9bc0000 { @@ -620,7 +633,7 @@ apcs_glb: mailbox@9820000 { compatible = "qcom,msm8996-apcs-hmss-global"; - reg = <0x9820000 0x1000>; + reg = <0x09820000 0x1000>; #mbox-cells = <1>; }; @@ -630,7 +643,7 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - reg = <0x300000 0x90000>; + reg = <0x00300000 0x90000>; }; stm@3002000 { @@ -736,6 +749,14 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + in-ports { + port { + funnel_in2_in_modem_etm: endpoint { + remote-endpoint = + <&modem_etm_out_funnel_in2>; + }; + }; + }; out-ports { port { @@ -1103,7 +1124,7 @@ kryocc: clock-controller@6400000 { compatible = "qcom,apcc-msm8996"; - reg = <0x6400000 0x90000>; + reg = <0x06400000 0x90000>; #clock-cells = <1>; }; @@ -1149,7 +1170,7 @@ blsp2_uart1: serial@75b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x75b0000 0x1000>; + reg = <0x075b0000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; @@ -1215,7 +1236,7 @@ sdhc2: sdhci@74a4900 { status = "disabled"; compatible = "qcom,sdhci-msm-v4"; - reg = <0x74a4900 0x314>, <0x74a4000 0x800>; + reg = <0x074a4900 0x314>, <0x074a4000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, @@ -1300,11 +1321,11 @@ spmi_bus: qcom,spmi@400f000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x400f000 0x1000>, - <0x4400000 0x800000>, - <0x4c00000 0x800000>, - <0x5800000 0x200000>, - <0x400a000 0x002100>; + reg = <0x0400f000 0x1000>, + <0x04400000 0x800000>, + <0x04c00000 0x800000>, + <0x05800000 0x200000>, + <0x0400a000 0x002100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; @@ -1318,20 +1339,10 @@ ufsphy: phy@627000 { compatible = "qcom,msm8996-ufs-phy-qmp-14nm"; - reg = <0x627000 0xda8>; + reg = <0x00627000 0xda8>; reg-names = "phy_mem"; #phy-cells = <0>; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; - - vddp-ref-clk-supply = <&pm8994_l25>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; - clock-names = "ref_clk_src", "ref_clk"; clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; @@ -1341,20 +1352,12 @@ ufshc: ufshc@624000 { compatible = "qcom,ufshc"; - reg = <0x624000 0x2500>; + reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufsphy>; phy-names = "ufsphy"; - vcc-supply = <&pm8994_l20>; - vccq-supply = <&pm8994_l25>; - vccq2-supply = <&pm8994_s4>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; - power-domains = <&gcc UFS_GDSC>; clock-names = @@ -1408,7 +1411,7 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - reg = <0x8c0000 0x40000>; + reg = <0x008c0000 0x40000>; assigned-clocks = <&mmcc MMPLL9_PLL>, <&mmcc MMPLL1_PLL>, <&mmcc MMPLL3_PLL>, @@ -1423,7 +1426,7 @@ qfprom@74000 { compatible = "qcom,qfprom"; - reg = <0x74000 0x8ff>; + reg = <0x00074000 0x8ff>; #address-cells = <1>; #size-cells = <1>; @@ -1443,9 +1446,9 @@ }; }; - phy@34000 { + pcie_phy: phy@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; - reg = <0x34000 0x488>; + reg = <0x00034000 0x488>; #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; @@ -1456,9 +1459,6 @@ <&gcc GCC_PCIE_CLKREF_CLK>; clock-names = "aux", "cfg_ahb", "ref"; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - resets = <&gcc GCC_PCIE_PHY_BCR>, <&gcc GCC_PCIE_PHY_COM_BCR>, <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; @@ -1466,9 +1466,9 @@ status = "disabled"; pciephy_0: lane@35000 { - reg = <0x035000 0x130>, - <0x035200 0x200>, - <0x035400 0x1dc>; + reg = <0x00035000 0x130>, + <0x00035200 0x200>, + <0x00035400 0x1dc>; #phy-cells = <0>; clock-output-names = "pcie_0_pipe_clk_src"; @@ -1479,9 +1479,9 @@ }; pciephy_1: lane@36000 { - reg = <0x036000 0x130>, - <0x036200 0x200>, - <0x036400 0x1dc>; + reg = <0x00036000 0x130>, + <0x00036200 0x200>, + <0x00036400 0x1dc>; #phy-cells = <0>; clock-output-names = "pcie_1_pipe_clk_src"; @@ -1492,9 +1492,9 @@ }; pciephy_2: lane@37000 { - reg = <0x037000 0x130>, - <0x037200 0x200>, - <0x037400 0x1dc>; + reg = <0x00037000 0x130>, + <0x00037200 0x200>, + <0x00037400 0x1dc>; #phy-cells = <0>; clock-output-names = "pcie_2_pipe_clk_src"; @@ -1505,9 +1505,9 @@ }; }; - phy@7410000 { + usb3phy: phy@7410000 { compatible = "qcom,msm8996-qmp-usb3-phy"; - reg = <0x7410000 0x1c4>; + reg = <0x07410000 0x1c4>; #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; @@ -1518,18 +1518,15 @@ <&gcc GCC_USB3_CLKREF_CLK>; clock-names = "aux", "cfg_ahb", "ref"; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - resets = <&gcc GCC_USB3_PHY_BCR>, <&gcc GCC_USB3PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; ssusb_phy_0: lane@7410200 { - reg = <0x7410200 0x200>, - <0x7410400 0x130>, - <0x7410600 0x1a8>; + reg = <0x07410200 0x200>, + <0x07410400 0x130>, + <0x07410600 0x1a8>; #phy-cells = <0>; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -1540,16 +1537,13 @@ hsusb_phy1: phy@7411000 { compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x7411000 0x180>; + reg = <0x07411000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_RX1_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; nvmem-cells = <&qusb2p_hstx_trim>; status = "disabled"; @@ -1557,16 +1551,13 @@ hsusb_phy2: phy@7412000 { compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x7412000 0x180>; + reg = <0x07412000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_RX2_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; nvmem-cells = <&qusb2s_hstx_trim>; status = "disabled"; @@ -1574,7 +1565,7 @@ usb2: usb@76f8800 { compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0x76f8800 0x400>; + reg = <0x076f8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1594,7 +1585,7 @@ dwc3@7600000 { compatible = "snps,dwc3"; - reg = <0x7600000 0xcc00>; + reg = <0x07600000 0xcc00>; interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy2>; phy-names = "usb2-phy"; @@ -1605,7 +1596,7 @@ usb3: usb@6af8800 { compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0x6af8800 0x400>; + reg = <0x06af8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1626,7 +1617,7 @@ dwc3@6a00000 { compatible = "snps,dwc3"; - reg = <0x6a00000 0xcc00>; + reg = <0x06a00000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy1>, <&ssusb_phy_0>; phy-names = "usb2-phy", "usb3-phy"; @@ -1637,7 +1628,7 @@ vfe_smmu: iommu@da0000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xda0000 0x10000>; + reg = <0x00da0000 0x10000>; #global-interrupts = <1>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, @@ -1653,20 +1644,20 @@ camss: camss@a00000 { compatible = "qcom,msm8996-camss"; - reg = <0xa34000 0x1000>, - <0xa00030 0x4>, - <0xa35000 0x1000>, - <0xa00038 0x4>, - <0xa36000 0x1000>, - <0xa00040 0x4>, - <0xa30000 0x100>, - <0xa30400 0x100>, - <0xa30800 0x100>, - <0xa30c00 0x100>, - <0xa31000 0x500>, - <0xa00020 0x10>, - <0xa10000 0x1000>, - <0xa14000 0x1000>; + reg = <0x00a34000 0x1000>, + <0x00a00030 0x4>, + <0x00a35000 0x1000>, + <0x00a00038 0x4>, + <0x00a36000 0x1000>, + <0x00a00040 0x4>, + <0x00a30000 0x100>, + <0x00a30400 0x100>, + <0x00a30800 0x100>, + <0x00a30c00 0x100>, + <0x00a31000 0x500>, + <0x00a00020 0x10>, + <0x00a10000 0x1000>, + <0x00a14000 0x1000>; reg-names = "csiphy0", "csiphy0_clk_mux", "csiphy1", @@ -1774,7 +1765,6 @@ "vfe1_stream", "vfe_ahb", "vfe_axi"; - vdda-supply = <&pm8994_l2>; iommus = <&vfe_smmu 0>, <&vfe_smmu 1>, <&vfe_smmu 2>, @@ -1788,7 +1778,7 @@ adreno_smmu: iommu@b40000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xb40000 0x10000>; + reg = <0x00b40000 0x10000>; #global-interrupts = <1>; interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, @@ -1805,7 +1795,7 @@ mdp_smmu: iommu@d00000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xd00000 0x10000>; + reg = <0x00d00000 0x10000>; #global-interrupts = <1>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, @@ -1821,7 +1811,7 @@ lpass_q6_smmu: iommu@1600000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0x1600000 0x20000>; + reg = <0x01600000 0x20000>; #iommu-cells = <1>; power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; @@ -1886,9 +1876,6 @@ pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>; pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>; - - vdda-supply = <&pm8994_l28>; - linux,pci-domain = <0>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, @@ -1941,8 +1928,6 @@ pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>; pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>; - - vdda-supply = <&pm8994_l28>; linux,pci-domain = <1>; clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, @@ -1994,8 +1979,6 @@ pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>; pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >; - vdda-supply = <&pm8994_l28>; - linux,pci-domain = <2>; clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, <&gcc GCC_PCIE_2_AUX_CLK>, @@ -2015,7 +1998,7 @@ { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; - reg = <0x9184000 0x32000>; + reg = <0x09184000 0x32000>; num-channels = <31>; interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; @@ -2025,7 +2008,7 @@ slim_msm: slim@91c0000 { compatible = "qcom,slim-ngd-v1.5.0"; - reg = <0x91c0000 0x2C000>; + reg = <0x091c0000 0x2C000>; reg-names = "ctrl"; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; dmas = <&slimbam 3>, <&slimbam 4>, @@ -2060,12 +2043,6 @@ slim-ifc-dev = <&tasha_ifd>; - vdd-buck-supply = <&pm8994_s4>; - vdd-buck-sido-supply = <&pm8994_s4>; - vdd-tx-supply = <&pm8994_s4>; - vdd-rx-supply = <&pm8994_s4>; - vdd-io-supply = <&pm8994_s4>; - #sound-dai-cells = <1>; }; }; @@ -2075,7 +2052,7 @@ compatible = "qcom,adreno-530.2", "qcom,adreno"; #stream-id-cells = <16>; - reg = <0xb00000 0x3f000>; + reg = <0x00b00000 0x3f000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; @@ -2146,9 +2123,9 @@ mdss: mdss@900000 { compatible = "qcom,mdss"; - reg = <0x900000 0x1000>, - <0x9b0000 0x1040>, - <0x9b8000 0x1040>; + reg = <0x00900000 0x1000>, + <0x009b0000 0x1040>, + <0x009b8000 0x1040>; reg-names = "mdss_phys", "vbif_phys", "vbif_nrt_phys"; @@ -2168,7 +2145,7 @@ mdp: mdp@901000 { compatible = "qcom,mdp5"; - reg = <0x901000 0x90000>; + reg = <0x00901000 0x90000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; @@ -2244,12 +2221,12 @@ hdmi_phy: hdmi-phy@9a0600 { #phy-cells = <0>; compatible = "qcom,hdmi-phy-8996"; - reg = <0x9a0600 0x1c4>, - <0x9a0a00 0x124>, - <0x9a0c00 0x124>, - <0x9a0e00 0x124>, - <0x9a1000 0x124>, - <0x9a1200 0x0c8>; + reg = <0x009a0600 0x1c4>, + <0x009a0a00 0x124>, + <0x009a0c00 0x124>, + <0x009a0e00 0x124>, + <0x009a1000 0x124>, + <0x009a1200 0x0c8>; reg-names = "hdmi_pll", "hdmi_tx_l0", "hdmi_tx_l1", diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index dcb79003ca0e..9cb7163c5714 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1396,9 +1396,11 @@ cpu = <&CPU4>; - port{ - etm4_out: endpoint { - remote-endpoint = <&apss_funnel_in4>; + out-ports { + port{ + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; }; }; }; @@ -1413,9 +1415,11 @@ cpu = <&CPU5>; - port{ - etm5_out: endpoint { - remote-endpoint = <&apss_funnel_in5>; + out-ports { + port{ + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; }; }; }; @@ -1430,9 +1434,11 @@ cpu = <&CPU6>; - port{ - etm6_out: endpoint { - remote-endpoint = <&apss_funnel_in6>; + out-ports { + port{ + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; }; }; }; @@ -1447,9 +1453,11 @@ cpu = <&CPU7>; - port{ - etm7_out: endpoint { - remote-endpoint = <&apss_funnel_in7>; + out-ports { + port{ + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index a97eeb4569c0..1eb51b12cfac 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -533,7 +533,7 @@ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, - <&gcc 21>; + <&gcc GCC_PCIE_0_PIPE_ARES>; reset-names = "phy", "pipe"; clock-output-names = "pcie_0_pipe_clk"; @@ -991,12 +991,12 @@ <&gcc GCC_PCIE_0_SLV_AXI_CLK>; clock-names = "iface", "aux", "master_bus", "slave_bus"; - resets = <&gcc 18>, - <&gcc 17>, - <&gcc 15>, - <&gcc 19>, + resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE_0_CORE_STICKY_ARES>, <&gcc GCC_PCIE_0_BCR>, - <&gcc 16>; + <&gcc GCC_PCIE_0_AHB_ARES>; reset-names = "axi_m", "axi_s", "axi_m_sticky", diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 99a28d64ee62..2b7923f1f0ec 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -1310,7 +1310,7 @@ ap_ts_i2c: &i2c14 { config { pins = "gpio126"; function = "gpio"; - bias-no-pull; + bias-disable; drive-strength = <2>; output-low; }; @@ -1320,7 +1320,7 @@ ap_ts_i2c: &i2c14 { config { pins = "gpio126"; function = "gpio"; - bias-no-pull; + bias-disable; drive-strength = <2>; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index bf4fde88011c..e99a58b76d86 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -53,8 +53,8 @@ user4 { label = "green:user4"; gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "panic-indicator"; default-state = "off"; + panic-indicator; }; wlan { diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index c57548b7b250..e5331a81249b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -468,6 +468,8 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 2287354fef86..b4a0234f66d1 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -715,6 +715,7 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + power-domains = <&rpmhpd SDM845_CX>; }; qfprom@784000 { @@ -2500,10 +2501,10 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -2544,10 +2545,10 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -2939,6 +2940,15 @@ #power-domain-cells = <1>; }; + pdc_intc: interrupt-controller@b220000 { + compatible = "qcom,sdm845-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + pdc_reset: reset-controller@b2e0000 { compatible = "qcom,sdm845-pdc-global"; reg = <0 0x0b2e0000 0 0x20000>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 840d6b9bbb59..5eb8f014c3f5 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -298,8 +298,10 @@ }; &qup_i2c12_default { - drive-strength = <2>; - bias-disable; + pinmux { + drive-strength = <2>; + bias-disable; + }; }; &qup_uart6_default { diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 73ded80a79ba..1de7891c658c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -49,17 +49,14 @@ opp-shared; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; opp-suspend; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index dabee157119f..82efc8a3627d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -60,17 +60,14 @@ opp-shared; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; opp-suspend; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 82e463c32a37..bbf8d856e750 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -325,7 +325,7 @@ }; scif1_pins: scif1 { - groups = "scif1_data_b", "scif1_ctrl"; + groups = "scif1_data_b"; function = "scif1"; }; @@ -385,7 +385,6 @@ &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 6c3368f795ca..fbd942b46c54 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -90,7 +90,6 @@ linux,default-trigger = "heartbeat"; gpios = <&rk805 1 GPIO_ACTIVE_LOW>; default-state = "on"; - mode = <0x23>; }; user { @@ -98,7 +97,6 @@ linux,default-trigger = "mmc1"; gpios = <&rk805 0 GPIO_ACTIVE_LOW>; default-state = "off"; - mode = <0x05>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 6ddb6b8c1fad..ef45d5607ea1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -684,11 +684,20 @@ status = "disabled"; ports { - hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + hdmi_in_vop: endpoint { remote-endpoint = <&vop_out_hdmi>; }; }; + + hdmi_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index a9f4d6d7d2b7..586351340da6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -77,3 +77,8 @@ }; }; }; + +&wlan_host_wake_l { + /* Kevin has an external pull up, but Bob does not. */ + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 7cd6d470c1cb..7416db3d27a7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -237,6 +237,14 @@ &edp { status = "okay"; + /* + * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only + * set this here, because rk3399-gru.dtsi ensures we can generate this + * off GPLL=600MHz, whereas some other RK3399 boards may not. + */ + assigned-clocks = <&cru PCLK_EDP>; + assigned-clock-rates = <24000000>; + ports { edp_out: port@1 { reg = <1>; @@ -397,6 +405,7 @@ ap_i2c_tp: &i2c5 { }; wlan_host_wake_l: wlan-host-wake-l { + /* Kevin has an external pull up, but Bob does not */ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index d80d6b726820..d29937e4a606 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -203,7 +203,7 @@ cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; disable-wp; - max-frequency = <150000000>; + max-frequency = <40000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vcc3v3_baseboard>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 390b86ec6538..7fea9d6fbdcf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -102,7 +102,6 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; @@ -426,16 +425,22 @@ gpio1830-supply = <&vcc_1v8>; }; -&pmu_io_domains { - status = "okay"; - pmu1830-supply = <&vcc_1v8>; -}; - -&pwm2 { - status = "okay"; +&pcie_clkreqn_cpm { + rockchip,pins = + <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; }; &pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&q7_thermal_pin>; + + gpios { + q7_thermal_pin: q7-thermal-pin { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + i2c8 { i2c8_xfer_a: i2c8-xfer { rockchip,pins = @@ -466,6 +471,15 @@ }; }; +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&pwm2 { + status = "okay"; +}; + &sdhci { /* * Signal integrity isn't great at 200MHz but 100MHz has proven stable diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts index da3b031d4bef..79d04a664b82 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts @@ -441,7 +441,6 @@ &i2s1 { rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - status = "okay"; }; &i2s2 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 95942d917de5..e5a25bc7d799 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1447,6 +1447,7 @@ reg = <0xf780 0x24>; clocks = <&sdhci>; clock-names = "emmcclk"; + drive-impedance-ohm = <50>; #phy-cells = <0>; status = "disabled"; }; @@ -1457,7 +1458,6 @@ clock-names = "refclk"; #phy-cells = <1>; resets = <&cru SRST_PCIEPHY>; - drive-impedance-ohm = <50>; reset-names = "phy"; status = "disabled"; }; @@ -1743,6 +1743,7 @@ hdmi: hdmi@ff940000 { compatible = "rockchip,rk3399-dw-hdmi"; reg = <0x0 0xff940000 0x0 0x20000>; + reg-io-width = <4>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_SFR>, @@ -1751,13 +1752,16 @@ <&cru PLL_VPLL>; clock-names = "iahb", "isfr", "cec", "grf", "vpll"; power-domains = <&power RK3399_PD_HDCP>; - reg-io-width = <4>; rockchip,grf = <&grf>; #sound-dai-cells = <0>; status = "disabled"; ports { - hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -1770,6 +1774,10 @@ remote-endpoint = <&vopl_out_hdmi>; }; }; + + hdmi_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index 6537c69de3dd..b793a43e0612 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -544,8 +544,8 @@ compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65a00000 0xcd00>; - interrupt-names = "host", "peripheral"; - interrupts = <0 134 4>, <0 135 4>; + interrupt-names = "dwc_usb3"; + interrupts = <0 134 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; clock-names = "ref", "bus_early", "suspend"; @@ -646,8 +646,8 @@ compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65c00000 0xcd00>; - interrupt-names = "host", "peripheral"; - interrupts = <0 137 4>, <0 138 4>; + interrupt-names = "dwc_usb3"; + interrupts = <0 137 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; clock-names = "ref", "bus_early", "suspend"; |