diff options
Diffstat (limited to 'arch/arm/boot')
| -rw-r--r-- | arch/arm/boot/dts/arm-realview-pb1176.dts | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 28 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6sx.dtsi | 6 | ||||
| -rw-r--r-- | arch/arm/boot/dts/mmp2-brownstone.dts | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 24 |
7 files changed, 49 insertions, 16 deletions
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index f925782f8560..f0be83eebb09 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -435,7 +435,7 @@ /* Direct-mapped development chip ROM */ pb1176_rom@10200000 { - compatible = "direct-mapped"; + compatible = "mtd-rom"; reg = <0x10200000 0x4000>; bank-width = <1>; }; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts index 00e688b45d98..5901160919dc 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -26,7 +26,6 @@ wlan { label = "bcm53xx:blue:wlan"; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; system { diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts index 78c80a5d3f4f..8e7483272d47 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -26,7 +26,6 @@ 5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; system { @@ -42,7 +41,6 @@ 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index ebc0892e37c7..cbf5a76625e6 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -103,8 +103,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - phy-reset-duration = <20>; phy-supply = <&sw2_reg>; status = "okay"; @@ -117,17 +115,10 @@ #address-cells = <1>; #size-cells = <0>; - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - switch@10 { compatible = "qca,qca8334"; - reg = <10>; + reg = <0x10>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; switch_ports: ports { #address-cells = <1>; @@ -148,15 +139,30 @@ eth2: port@2 { reg = <2>; label = "eth2"; + phy-mode = "internal"; phy-handle = <&phy_port2>; }; eth1: port@3 { reg = <3>; label = "eth1"; + phy-mode = "internal"; phy-handle = <&phy_port3>; }; }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port2: ethernet-phy@1 { + reg = <1>; + }; + + phy_port3: ethernet-phy@2 { + reg = <2>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 08332f70a8dc..51491b7418e4 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -981,6 +981,8 @@ <&clks IMX6SX_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -993,6 +995,8 @@ <&clks IMX6SX_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -1005,6 +1009,8 @@ <&clks IMX6SX_CLK_USDHC3>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index 04f1ae1382e7..bc64348b8218 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -28,7 +28,7 @@ &twsi1 { status = "okay"; pmic: max8925@3c { - compatible = "maxium,max8925"; + compatible = "maxim,max8925"; reg = <0x3c>; interrupts = <1>; interrupt-parent = <&intcmux4>; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 4c6704e4c57e..74d5732c412b 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -62,6 +62,30 @@ states = <1100000 0>, <1300000 1>; }; + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + vin-supply = <®_vcc5v0>; + }; + + reg_vcc1v2: vcc1v2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + vin-supply = <®_vcc5v0>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ |