diff options
Diffstat (limited to 'Documentation')
84 files changed, 277 insertions, 242 deletions
diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst index e972caa43bd4..e35a3f2fb006 100644 --- a/Documentation/admin-guide/sysctl/vm.rst +++ b/Documentation/admin-guide/sysctl/vm.rst @@ -428,7 +428,7 @@ While most applications need less than a thousand maps, certain programs, particularly malloc debuggers, may consume lots of them, e.g., up to one or two maps per allocation. -The default value is 65536. +The default value is 65530. memory_failure_early_kill: diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/arm/idle-states.yaml index ea805c1e6b20..52bce5dbb11f 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.yaml +++ b/Documentation/devicetree/bindings/arm/idle-states.yaml @@ -313,7 +313,7 @@ patternProperties: wakeup-latency-us by this duration. idle-state-name: - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string description: A string used as a descriptive name for the idle state. diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index 0503651cd214..863a287ebc7e 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -34,7 +34,7 @@ properties: description: The SRAM that needs to be claimed to access the display engine bus. - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 ranges: true diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml index 0bee4694578a..4ac78b44e45e 100644 --- a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml @@ -46,7 +46,7 @@ properties: const: 1 syscon: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the Baikal-T1 System Controller DT node interrupts: diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml index e709e530e17a..940486ef1051 100644 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -29,18 +29,18 @@ properties: - const: fsl,imx8qxp-lpcg - items: - enum: - - fsl,imx8qm-lpcg + - fsl,imx8qm-lpcg - const: fsl,imx8qxp-lpcg - enum: - - fsl,imx8qxp-lpcg-adma - - fsl,imx8qxp-lpcg-conn - - fsl,imx8qxp-lpcg-dc - - fsl,imx8qxp-lpcg-dsp - - fsl,imx8qxp-lpcg-gpu - - fsl,imx8qxp-lpcg-hsio - - fsl,imx8qxp-lpcg-img - - fsl,imx8qxp-lpcg-lsio - - fsl,imx8qxp-lpcg-vpu + - fsl,imx8qxp-lpcg-adma + - fsl,imx8qxp-lpcg-conn + - fsl,imx8qxp-lpcg-dc + - fsl,imx8qxp-lpcg-dsp + - fsl,imx8qxp-lpcg-gpu + - fsl,imx8qxp-lpcg-hsio + - fsl,imx8qxp-lpcg-img + - fsl,imx8qxp-lpcg-lsio + - fsl,imx8qxp-lpcg-vpu deprecated: true reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index a84464b3e1f2..4286ed767a0a 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -37,7 +37,7 @@ properties: description: Size of the connector, should be specified in case of non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible connectors. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - mini @@ -67,7 +67,7 @@ properties: power-role: description: Determines the power role that the Type C connector will support. "dual" refers to Dual Role Port (DRP). - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - source @@ -76,7 +76,7 @@ properties: try-power-role: description: Preferred power role. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - source @@ -86,7 +86,7 @@ properties: data-role: description: Data role if Type C connector supports USB data. "dual" refers Dual Role Device (DRD). - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - host @@ -105,7 +105,7 @@ properties: Type-C Cable and Connector specification, when Power Delivery is not supported. allOf: - - $ref: /schemas/types.yaml#definitions/string + - $ref: /schemas/types.yaml#/definitions/string enum: - default - 1.5A diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 60585a4fc22b..9392b5502a32 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -49,8 +49,8 @@ properties: Video port for panel or connector. required: - - port@0 - - port@1 + - port@0 + - port@1 required: - compatible diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml index 8c0e4f285fbc..fccd63521a8c 100644 --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -26,11 +26,9 @@ properties: description: GPIO connected to active low reset dvdd12-supply: - maxItems: 1 description: Regulator for 1.2V digital core power. dvdd25-supply: - maxItems: 1 description: Regulator for 2.5V digital core power. ports: diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml index ab5be2625224..35c9dfd86650 100644 --- a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml @@ -39,10 +39,10 @@ properties: properties: '#address-cells': - const: 1 + const: 1 '#size-cells': - const: 0 + const: 0 port@0: type: object diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index efbb3d0117dc..02cfc0a3b550 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -35,11 +35,9 @@ properties: maxItems: 1 ovdd-supply: - maxItems: 1 description: I/O voltage pwr18-supply: - maxItems: 1 description: core voltage interrupts: diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index e5e3c72630cf..66a14d60ce1d 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -79,8 +79,7 @@ properties: The GPIO used to control the power down line of this device. maxItems: 1 - power-supply: - maxItems: 1 + power-supply: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml index 7e27cfcf770d..763c7909473e 100644 --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -35,11 +35,9 @@ properties: description: GPIO connected to active low reset. vdd12-supply: - maxItems: 1 description: Regulator for 1.2V digital core power. vdd33-supply: - maxItems: 1 description: Regulator for 3.3V digital core power. ports: diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index 3ddb35fcf0a2..64e8a1c24b40 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -60,7 +60,6 @@ properties: description: GPIO controlling bridge enable vdd-supply: - maxItems: 1 description: Power supply for the bridge required: diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml index 469ac4a34273..3d5ce08a5792 100644 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml @@ -74,7 +74,6 @@ properties: description: Power down GPIO signal, pin name "/PDWN", active low. vcc-supply: - maxItems: 1 description: Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and digital circuitry. diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml index fd3113aa9ccd..b5959cc78b8d 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -28,11 +28,9 @@ properties: description: i2c address of the bridge, 0x0f vdd-supply: - maxItems: 1 description: 1.2V LVDS Power Supply vddio-supply: - maxItems: 1 description: 1.8V IO Power Supply stby-gpios: diff --git a/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml b/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml index 40caa6118809..a222b52d8b8f 100644 --- a/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml +++ b/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml @@ -18,8 +18,8 @@ description: | properties: compatible: items: - - const: intel,keembay-msscam - - const: syscon + - const: intel,keembay-msscam + - const: syscon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml index 91cb4c3e0198..a108029ecfab 100644 --- a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml +++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml @@ -32,7 +32,7 @@ required: - power-supply - reset-gpios -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml index d2170de6b723..2f5df1d235ae 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml @@ -22,7 +22,7 @@ properties: compatible: items: - enum: - - tianma,fhd-video + - tianma,fhd-video - const: novatek,nt36672a description: This indicates the panel manufacturer of the panel that is in turn using the NT36672A panel driver. This compatible string diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml index 7b9d468c3e52..403d57977ee7 100644 --- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -98,7 +98,6 @@ properties: maxItems: 1 dmas: - maxItems: 4 items: - description: Video layer, plane 0 (RGB or luma) - description: Video layer, plane 1 (U/V or U) diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index 307b499e8968..ad06d36af208 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -38,12 +38,12 @@ properties: maxItems: 255 dma-channels: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of DMA channels supported by the controller. dma-requests: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of DMA request signals supported by the controller. diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml index 4cee5667b8a8..e72748496fd9 100644 --- a/Documentation/devicetree/bindings/dma/dma-router.yaml +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml @@ -23,7 +23,7 @@ properties: pattern: "^dma-router(@.*)?$" dma-masters: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: Array of phandles to the DMA controllers the router can direct the signal to. diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml index 00f19b3cac31..6a2043721b95 100644 --- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml +++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml @@ -48,7 +48,7 @@ properties: ingenic,reserved-channels property. ingenic,reserved-channels: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: > Bitmask of channels to reserve for devices that need a specific channel. These channels will only be assigned when explicitely diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml index b548e4723936..c07eb6f2fc8d 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml @@ -73,7 +73,6 @@ properties: maxItems: 1 clock-names: - maxItems: 1 items: - const: fck diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml index ef1d6879c158..6b35089ac017 100644 --- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml +++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml @@ -54,7 +54,7 @@ properties: maximum: 16 dma-masters: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Number of DMA masters supported by the controller. In case if not specified the driver will try to auto-detect this and @@ -63,7 +63,7 @@ properties: maximum: 4 chan_allocation_order: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | DMA channels allocation order specifier. Zero means ascending order (first free allocated), while one - descending (last free allocated). @@ -71,7 +71,7 @@ properties: enum: [0, 1] chan_priority: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | DMA channels priority order. Zero means ascending channels priority so the very first channel has the highest priority. While 1 means @@ -80,7 +80,7 @@ properties: enum: [0, 1] block_size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum block size supported by the DMA controller. enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095] @@ -139,7 +139,7 @@ properties: default: 256 snps,dma-protection-control: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting indicates the following features: bit 0 - privileged mode, diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 6edfa705b486..d5117c638b75 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -131,7 +131,7 @@ properties: default: 1 read-only: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Disables writes to the eeprom. @@ -141,7 +141,7 @@ properties: Total eeprom size in bytes. no-read-rollover: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that the multi-address eeprom does not automatically roll over reads to the next slave address. Please consult the manual of diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 744973637678..121a601db22e 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -45,13 +45,13 @@ properties: spi-max-frequency: true pagesize: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072] description: Size of the eeprom page. size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Total eeprom size in bytes. diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml index 6f3e3c01f717..b79f069a04c2 100644 --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -32,7 +32,7 @@ properties: PVT controller has 5 VM (voltage monitor) sensors. vm-map defines CPU core to VM instance mapping. A value of 0xff means that VM sensor is unused. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array maxItems: 5 clocks: diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml index c523a1beb2b7..7d49478d9668 100644 --- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml @@ -29,12 +29,12 @@ properties: const: 0x70 sensirion,blocking-io: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, the driver hold the i2c bus until measurement is finished. sensirion,low-precision: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, the sensor aquire data with low precision (not recommended). The driver aquire data with high precision by default. diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index c17e5d3ee3f1..8020d739a078 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -61,7 +61,7 @@ properties: Array of three(TMP513) or two(TMP512) n-Factor value for each remote temperature channel. See datasheet Table 11 for n-Factor range list and value interpretation. - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 3 items: diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 6a991e9f78e2..2716d4e95329 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -17,8 +17,7 @@ properties: - lltc,ltc2496 vref-supply: - description: phandle to an external regulator providing the reference voltage - $ref: /schemas/types.yaml#/definitions/phandle + description: Power supply for the reference voltage reg: description: spi chipselect number according to the usual spi bindings diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index 7037f82ec753..88384b69f917 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -22,8 +22,7 @@ properties: - ti,hdc2010 - ti,hdc2080 - vdd-supply: - maxItems: 1 + vdd-supply: true reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml index 4a9b2827cf7b..de5882cb3360 100644 --- a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml +++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml @@ -45,7 +45,7 @@ properties: default: 0x16 upisemi,continuous: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: | This chip has two power modes: one-shot (chip takes one measurement and then shuts itself down) and continuous (chip takes continuous diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml index ccfb163f3d34..5de0bb2180e6 100644 --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml @@ -72,7 +72,7 @@ properties: - finest semtech,startup-sensor: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2, 3] default: 0 description: @@ -81,7 +81,7 @@ properties: compensation. semtech,proxraw-strength: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 2, 4, 8] default: 2 description: @@ -89,7 +89,7 @@ properties: represent 1-1/N. semtech,avg-pos-strength: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295] default: 16 description: diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml index 378a85c09d34..878464f128dc 100644 --- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml +++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml @@ -31,8 +31,7 @@ properties: interrupts: maxItems: 1 - vdd-supply: - maxItems: 1 + vdd-supply: true linux,keycodes: minItems: 1 diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml index 6966ab009fa3..060a309ff8e7 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.yaml +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml @@ -34,13 +34,13 @@ patternProperties: linux,code: description: Key / Axis code to emit. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 linux,input-type: description: Specify event type this button/key generates. If not specified defaults to <1> == EV_KEY. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 default: 1 @@ -56,12 +56,12 @@ patternProperties: linux,input-value = <0xffffffff>; /* -1 */ - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 debounce-interval: description: Debouncing interval time in milliseconds. If not specified defaults to 5. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 default: 5 @@ -79,7 +79,7 @@ patternProperties: EV_ACT_ANY - both asserted and deasserted EV_ACT_ASSERTED - asserted EV_ACT_DEASSERTED - deasserted - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] linux,can-disable: @@ -118,7 +118,7 @@ then: poll-interval: description: Poll interval time in milliseconds - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 required: - poll-interval diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 4ce109476a0e..bfc3a8b5e118 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -55,8 +55,7 @@ properties: wakeup-source: true - vcc-supply: - maxItems: 1 + vcc-supply: true gain: description: Allows setting the sensitivity in the range from 0 to 31. diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml index 039e08af98bb..91bb3c2307a7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml @@ -42,7 +42,7 @@ properties: Specifies the list of CPU interrupt vectors to which the GIC may not route interrupts. This property is ignored if the CPU is started in EIC mode. - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 6 uniqueItems: true @@ -56,7 +56,7 @@ properties: It accepts two values: the 1st is the starting interrupt and the 2nd is the size of the reserved range. If not specified, the driver will allocate the last (2 * number of VPEs in the system). - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: - minimum: 0 maximum: 254 diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml index 1c4c009dedd0..c2ce215501a5 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -80,7 +80,7 @@ properties: mapping is provided. ti,irqs-reserved: - $ref: /schemas/types.yaml#definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 description: | Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC output interrupts 2 through 9) that are not connected to the Arm interrupt diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml index b5af12011499..3d89668573e8 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -76,7 +76,7 @@ properties: "limit" specifies the limit for translation ti,unmapped-event-sources: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: Array of phandles to DMA controllers where the unmapped events originate. diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml index bc817f77d2b1..702ba350d869 100644 --- a/Documentation/devicetree/bindings/leds/backlight/common.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml @@ -22,7 +22,7 @@ properties: The default brightness that should be applied to the LED by the operating system on start-up. The brightness should not exceed the brightness the LED can provide. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 max-brightness: description: @@ -31,6 +31,6 @@ properties: on the brightness apart from what the driver says, as it could happen that a LED can be made so bright that it gets damaged or causes damage due to restrictions in a specific system, such as mounting conditions. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 additionalProperties: true diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index f1211e7045f1..b1f363747a62 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -27,21 +27,21 @@ properties: List of device current outputs the LED is connected to. The outputs are identified by the numbers that must be defined in the LED device binding documentation. - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array function: description: LED function. Use one of the LED_FUNCTION_* prefixed definitions from the header include/dt-bindings/leds/common.h. If there is no matching LED_FUNCTION available, add a new one. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string color: description: Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from the header include/dt-bindings/leds/common.h. If there is no matching LED_COLOR_ID available, add a new one. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 9 @@ -49,7 +49,7 @@ properties: description: Integer to be used when more than one instance of the same function is needed, differing only with an ordinal number. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 label: description: @@ -66,7 +66,7 @@ properties: produced where the LED momentarily turns off (or on). The "keep" setting will keep the LED at whatever its current state is, without producing a glitch. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - on - off @@ -77,7 +77,7 @@ properties: description: This parameter, if present, is a string defining the trigger assigned to the LED. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: # LED will act as a back-light, controlled by the framebuffer system @@ -109,7 +109,7 @@ properties: brightness and duration (in ms). The exact format is described in: Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt - $ref: /schemas/types.yaml#definitions/uint32-matrix + $ref: /schemas/types.yaml#/definitions/uint32-matrix items: minItems: 2 maxItems: 2 @@ -143,7 +143,7 @@ properties: the device tree and be referenced by a phandle and a set of phandle arguments. A length of arguments should be specified by the #trigger-source-cells property in the source node. - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array # Required properties for flash LED child nodes: flash-max-microamp: diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml index 58e974793a79..f552cd143d5b 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -35,7 +35,7 @@ properties: description: I2C slave address clock-mode: - $ref: /schemas/types.yaml#definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 description: | Input clock mode enum: @@ -49,7 +49,7 @@ properties: GPIO attached to the chip's enable pin pwr-sel: - $ref: /schemas/types.yaml#definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 description: | LP8501 specific property. Power selection for output channels. enum: @@ -70,14 +70,14 @@ patternProperties: $ref: common.yaml# properties: led-cur: - $ref: /schemas/types.yaml#definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 description: | Current setting at each LED channel (mA x10, 0 if LED is not connected) minimum: 0 maximum: 255 max-cur: - $ref: /schemas/types.yaml#definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 description: Maximun current at each LED channel. reg: @@ -97,7 +97,7 @@ patternProperties: - 8 # LED output D9 chan-name: - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string description: name of channel required: diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml index d43791a2dde7..d07eb00b97c8 100644 --- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -61,7 +61,6 @@ properties: - description: low-priority non-secure - description: high-priority non-secure - description: Secure - maxItems: 3 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml index 7bac0057faf7..36781ee4617f 100644 --- a/Documentation/devicetree/bindings/media/coda.yaml +++ b/Documentation/devicetree/bindings/media/coda.yaml @@ -44,6 +44,21 @@ properties: - const: per - const: ahb + interrupts: + minItems: 1 + items: + - description: BIT processor interrupt + - description: JPEG unit interrupt + + interrupt-names: + minItems: 1 + items: + - const: bit + - const: jpeg + + power-domains: + maxItems: 1 + resets: maxItems: 1 @@ -59,6 +74,8 @@ required: - clocks - clock-names +additionalProperties: false + allOf: - if: properties: @@ -68,34 +85,17 @@ allOf: then: properties: interrupts: - items: - - description: BIT processor interrupt - - description: JPEG unit interrupt + minItems: 2 interrupt-names: - items: - - const: bit - - const: jpeg + minItems: 2 else: properties: interrupts: - items: - - description: BIT processor interrupt - - - if: - properties: - compatible: - contains: - enum: - - fsl,imx6dl-vpu - - fsl,imx6q-vpu - then: - properties: - power-domains: - $ref: /schemas/types.yaml#/definitions/phandle - description: phandle pointing to the PU power domain maxItems: 1 + power-domains: false + examples: - | vpu: video-codec@63ff4000 { diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index 9ea827092fdd..68ee8c7d9e79 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -40,7 +40,6 @@ properties: poc-supply: description: Regulator providing Power over Coax to the cameras - maxItems: 1 enable-gpios: description: GPIO connected to the \#PWDN pin with inverted polarity diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml index d94bd67ccea1..bb3528315f20 100644 --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml @@ -1,6 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (C) 2014--2020 Intel Corporation - +%YAML 1.2 +--- $id: http://devicetree.org/schemas/media/i2c/mipi-ccs.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# @@ -26,11 +27,11 @@ properties: compatible: oneOf: - items: - - const: mipi-ccs-1.1 - - const: mipi-ccs + - const: mipi-ccs-1.1 + - const: mipi-ccs - items: - - const: mipi-ccs-1.0 - - const: mipi-ccs + - const: mipi-ccs-1.0 + - const: mipi-ccs - const: nokia,smia reg: @@ -38,15 +39,12 @@ properties: vana-supply: description: Analogue voltage supply (VANA), sensor dependent. - maxItems: 1 vcore-supply: description: Core voltage supply (VCore), sensor dependent. - maxItems: 1 vio-supply: description: I/O voltage supply (VIO), sensor dependent. - maxItems: 1 clocks: description: External clock to the sensor. diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml index 1a3590dd0e98..eb12526a462f 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml @@ -37,15 +37,12 @@ properties: vdddo-supply: description: Chip digital IO regulator (1.8V). - maxItems: 1 vdda-supply: description: Chip analog regulator (2.7V). - maxItems: 1 vddd-supply: description: Chip digital core regulator (1.12V). - maxItems: 1 flash-leds: description: See ../video-interfaces.txt diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml index f697e1a20beb..a66acb20d59b 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml @@ -33,15 +33,12 @@ properties: vana-supply: description: Sensor 2.8 V analog supply. - maxItems: 1 vdig-supply: description: Sensor 1.8 V digital core supply. - maxItems: 1 vddl-supply: description: Sensor digital IO 1.2 V supply. - maxItems: 1 port: type: object diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml index 888ab4b5df45..19e9afb385ac 100644 --- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml @@ -26,8 +26,7 @@ properties: drive-open-drain: true - vdd-supply: - maxItems: 1 + vdd-supply: true pinctrl: type: object diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index c7c9ad4e3f9f..7f2578d48e3f 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -38,7 +38,7 @@ properties: const: stmmaceth syscon: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the device containing the EMAC or GMAC clock register @@ -114,7 +114,7 @@ allOf: then: properties: allwinner,leds-active-low: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: EPHY LEDs are active low. @@ -126,7 +126,7 @@ allOf: const: allwinner,sun8i-h3-mdio-mux mdio-parent-bus: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to EMAC MDIO. diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index 6b057b117aa0..1f133f4a2924 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -60,7 +60,7 @@ allOf: - const: timing-adjustment amlogic,tx-delay-ns: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The internal RGMII TX clock delay (provided by this driver) in nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns. diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 8e044631bcf7..8a3494db4d8d 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -54,7 +54,7 @@ patternProperties: description: Describes the label associated with this port, which will become the netdev name - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string link: description: @@ -62,13 +62,13 @@ patternProperties: port is used as the outgoing port towards the phandle ports. The full routing information must be given, not just the one hop routes to neighbouring switches - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array ethernet: description: Should be a phandle to a valid Ethernet device node. This host device is what the switch port is connected to - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle phy-handle: true diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index cc93063a8f39..0965f6515f9e 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -16,7 +16,7 @@ properties: local-mac-address: description: Specifies the MAC address that was assigned to the network device. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array items: - minItems: 6 maxItems: 6 @@ -27,20 +27,20 @@ properties: program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array items: - minItems: 6 maxItems: 6 max-frame-size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there\'s contradiction in the Devicetree Specification). max-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Specifies maximum speed in Mbit/s supported by the device. @@ -101,7 +101,7 @@ properties: $ref: "#/properties/phy-connection-type" phy-handle: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a PHY device. @@ -114,7 +114,7 @@ properties: deprecated: true rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The size of the controller\'s receive fifo in bytes. This is used for components that can have configurable receive fifo sizes, @@ -129,12 +129,12 @@ properties: If this property is present then the MAC applies the RX delay. sfp: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a SFP cage. tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The size of the controller\'s transmit fifo in bytes. This is used for components that can have configurable fifo sizes. @@ -150,7 +150,7 @@ properties: description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string default: auto enum: - auto @@ -198,17 +198,17 @@ properties: speed: description: Link speed. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [10, 100, 1000] full-duplex: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that full-duplex is used. When absent, half duplex is assumed. asym-pause: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that asym_pause should be enabled. diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 6dd72faebd89..2766fe45bb98 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -78,57 +78,57 @@ properties: Maximum PHY supported speed in Mbits / seconds. broken-turn-around: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the PHY device does not correctly release the turn around line low at end of the control phase of the MDIO transaction. enet-phy-lane-swap: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the PHY will swap the TX/RX lanes to compensate for the board being designed with the lanes swapped. eee-broken-100tx: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-1000t: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gt: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-1000kx: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gkx4: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gkr: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. phy-is-integrated: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates that the PHY is integrated into the same physical package as the Ethernet MAC. If needed, muxers @@ -158,7 +158,7 @@ properties: this property is missing the delay will be skipped. sfp: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a SFP cage. diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml index 2159b7d1f537..7f620a71a972 100644 --- a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml +++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml @@ -31,7 +31,7 @@ properties: phy-mode: true pcs-handle: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: A reference to a node representing a PCS PHY device found on the internal MDIO bus. diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index e811e0fd851c..08e15fb1584f 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -70,7 +70,7 @@ patternProperties: The ID number for the device. broken-turn-around: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the MDIO device does not correctly release the turn around line low at end of the control phase of the diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml index 0bbd598704e9..e6a5ff208253 100644 --- a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml @@ -42,7 +42,7 @@ properties: - const: trans mediatek,pericfg: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the device containing the PERICFG register range. This is used to control the MII mode. diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 4d8464b2676d..8a2d12644675 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -114,14 +114,13 @@ properties: validating firwmare used by the GSI. modem-remoteproc: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: This defines the phandle to the remoteproc node representing the modem subsystem. This is requied so the IPA driver can receive and act on notifications of modem up/down events. memory-region: - $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 description: If present, a phandle for a reserved memory area that holds diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 11a6fdb657c9..b2f6083f556a 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -126,7 +126,7 @@ properties: in a different mode than the PHY in order to function. snps,axi-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: AXI BUS Mode parameters. Phandle to a node that can contain the following properties @@ -141,7 +141,7 @@ properties: * snps,rb, rebuild INCRx Burst snps,mtl-rx-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Multiple RX Queues parameters. Phandle to a node that can contain the following properties @@ -164,7 +164,7 @@ properties: * snps,priority, RX queue priority (Range 0x0 to 0xF) snps,mtl-tx-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Multiple TX Queues parameters. Phandle to a node that can contain the following properties @@ -198,7 +198,7 @@ properties: snps,reset-active-low: deprecated: true - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that the PHY Reset is active low @@ -208,55 +208,55 @@ properties: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 3 maxItems: 3 snps,aal: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Use Address-Aligned Beats snps,fixed-burst: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Program the DMA to use the fixed burst mode snps,mixed-burst: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Program the DMA to use the mixed burst mode snps,force_thresh_dma_mode: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Force DMA to use the threshold mode for both tx and rx snps,force_sf_dma_mode: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Force DMA to use the Store and Forward mode for both tx and rx. This flag is ignored if force_thresh_dma_mode is set. snps,en-tx-lpi-clockgating: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Enable gating of the MAC TX clock during TX low-power mode snps,multicast-filter-bins: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of multicast filter hash bins supported by this device instance snps,perfect-filter-entries: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of perfect filter entries supported by this device instance snps,ps-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Port selection speed that can be passed to the core when PCS is supported. For example, this is used in case of SGMII and @@ -307,25 +307,25 @@ allOf: snps,pbl: description: Programmable Burst Length (tx and rx) - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4, 8] snps,txpbl: description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4, 8] snps,rxpbl: description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4, 8] snps,no-pbl-x8: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core rev < 3.50, don\'t multiply the values by 4. @@ -351,7 +351,7 @@ allOf: then: properties: snps,tso: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Enables the TSO feature otherwise it will be managed by MAC HW capability register. diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index cbacc04fc9e6..8a03a24a2019 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -64,7 +64,7 @@ properties: - const: ether # for others socionext,syscon-phy-mode: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: A phandle to syscon with one argument that configures phy mode. The argument is the ID of MAC instance. diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index dadeb8f811c0..07a00f53adbf 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -70,7 +70,7 @@ properties: pinctrl-names: true syscon: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml index 4050a3608658..047d757e8d82 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml @@ -47,31 +47,31 @@ properties: takes precedence. tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Transmitt FIFO depth see dt-bindings/net/ti-dp83867.h for values rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Receive FIFO depth see dt-bindings/net/ti-dp83867.h for values ti,clk-output-sel: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h for applicable values. The CLK_OUT pin can also be disabled by this property. When omitted, the PHY's default will be left as is. ti,rx-internal-delay: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values. Required only if interface type is PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID. ti,tx-internal-delay: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values. Required only if interface type is @@ -101,7 +101,7 @@ properties: ti,fifo-depth: deprecated: true - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values. diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml index c3235f08e326..70a1209cb13b 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -44,22 +44,22 @@ properties: to a maximum value (70 ohms). tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values ti,clk-output-sel: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values. ti,op-mode: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Operational mode for the PHY. If this is not set then the operational mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 227270cbf892..c47b58f3e3f6 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -119,12 +119,12 @@ properties: description: label associated with this port ti,mac-only: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Specifies the port works in mac-only mode. ti,syscon-efuse: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index 6af999191559..85c2f699d602 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -136,7 +136,7 @@ properties: - const: tcl2host-status-ring qcom,rproc: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: DT entry of q6v5-wcss remoteproc driver. Phandle to a node that can contain the following properties diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index 83d5d0aceb04..cbbf5e8b1197 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -44,13 +44,13 @@ properties: - const: refclk syscon-phy-power: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: phandle/offset pair. Phandle to the system control module and register offset to power on/off the PHY. ctrl-module: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: (deprecated) phandle of the control module used by PHY driver to power on the PHY. Use syscon-phy-power instead. diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml index fd12bafe3548..d14cb9bac849 100644 --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -83,11 +83,11 @@ patternProperties: SUSBSYS clocks. mediatek,infracfg: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the INFRACFG register range. mediatek,smi: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the SMI register range. patternProperties: @@ -131,11 +131,11 @@ patternProperties: SUSBSYS clocks. mediatek,infracfg: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the INFRACFG register range. mediatek,smi: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the SMI register range. patternProperties: @@ -179,11 +179,11 @@ patternProperties: SUSBSYS clocks. mediatek,infracfg: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the INFRACFG register range. mediatek,smi: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the SMI register range. required: diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index ee92e6a076ac..5fcdf5801536 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -27,7 +27,7 @@ properties: of this binary blob is kept secret by CellWise. The only way to obtain it is to mail two batteries to a test facility of CellWise and receive back a test report with the binary blob. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array minItems: 64 maxItems: 64 diff --git a/Documentation/devicetree/bindings/powerpc/sleep.yaml b/Documentation/devicetree/bindings/powerpc/sleep.yaml index 6494c7d08b93..1b0936a5beec 100644 --- a/Documentation/devicetree/bindings/powerpc/sleep.yaml +++ b/Documentation/devicetree/bindings/powerpc/sleep.yaml @@ -42,6 +42,6 @@ select: true properties: sleep: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array additionalProperties: true diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml index e7b3abe30363..0a66338c7e5a 100644 --- a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml @@ -59,7 +59,6 @@ properties: description: u32 value representing regulator enable bit offset. vin-supply: - $ref: '/schemas/types.yaml#/definitions/phandle' description: input supply phandle. required: diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index c1d4c196f005..f54cae9ff7b2 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -126,7 +126,7 @@ properties: maxItems: 1 current-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The current active speed of the UART. reg-offset: @@ -154,7 +154,7 @@ properties: Set to indicate that the port does not implement loopback test mode. fifo-size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The fifo size of the UART. auto-flow-control: @@ -165,7 +165,7 @@ properties: property. tx-threshold: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. diff --git a/Documentation/devicetree/bindings/serial/litex,liteuart.yaml b/Documentation/devicetree/bindings/serial/litex,liteuart.yaml index bc79b3cca542..c4f1f489dc2d 100644 --- a/Documentation/devicetree/bindings/serial/litex,liteuart.yaml +++ b/Documentation/devicetree/bindings/serial/litex,liteuart.yaml @@ -29,6 +29,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | uart0: serial@e0001800 { diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml index e2b788796e79..c8b57c7fd08c 100644 --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml @@ -28,6 +28,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | soc_ctrl0: soc-controller@f0000000 { diff --git a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml index 6c763f873a63..31e4d3c339bf 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml @@ -44,6 +44,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml index c3c595e235a8..ddea3d41971d 100644 --- a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml +++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml @@ -55,7 +55,7 @@ properties: description: TI-SCI RM subtype for GP ring range ti,sci: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: phandle on TI-SCI compatible System controller node ti,sci-dev-id: diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml index 378d0ced43c8..cb245f400287 100644 --- a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml +++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml @@ -26,9 +26,18 @@ required: - compatible - reg +additionalProperties: false + examples: - | - xlnx_vcu: vcu@a0041000 { - compatible = "xlnx,vcu-settings", "syscon"; - reg = <0x0 0xa0041000 0x0 0x1000>; + fpga { + #address-cells = <2>; + #size-cells = <2>; + + xlnx_vcu: vcu@a0041000 { + compatible = "xlnx,vcu-settings", "syscon"; + reg = <0x0 0xa0041000 0x0 0x1000>; + }; }; + +... diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index be390accdd07..dd47fef9854d 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -57,7 +57,7 @@ properties: A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. - $ref: /schemas/types.yaml#definitions/non-unique-string-array + $ref: /schemas/types.yaml#/definitions/non-unique-string-array minItems: 2 maxItems: 18 items: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml index e543a6123792..b55775e21de6 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml @@ -44,7 +44,6 @@ properties: maxItems: 3 clock-names: - maxItems: 3 items: - const: hda - const: hda2hdmi @@ -54,7 +53,6 @@ properties: maxItems: 3 reset-names: - maxItems: 3 items: - const: hda - const: hda2hdmi diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 6ad48c7681c1..f2443b651282 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -106,7 +106,7 @@ patternProperties: Must contain the phandle and index of the SAI sub-block providing the synchronization. allOf: - - $ref: /schemas/types.yaml#definitions/phandle-array + - $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 st,iec60958: @@ -117,7 +117,7 @@ patternProperties: configured according to protocol defined in related DAI link node, such as i2s, left justified, right justified, dsp and pdm protocols. allOf: - - $ref: /schemas/types.yaml#definitions/flag + - $ref: /schemas/types.yaml#/definitions/flag "#clock-cells": description: Configure the SAI device as master clock provider. diff --git a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml index 0f078bd0a3e5..22603256ddf8 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml @@ -51,7 +51,6 @@ properties: maxItems: 1 phy-names: - maxItems: 1 items: - const: usb diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index 737c1f47b7de..54c361d4a7af 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -74,11 +74,8 @@ properties: phys: maxItems: 1 - items: - - description: phandle + phy specifier pair. phy-names: - maxItems: 1 items: - const: usb diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst index 849d5b119eb8..cdbfec473167 100644 --- a/Documentation/filesystems/ext4/journal.rst +++ b/Documentation/filesystems/ext4/journal.rst @@ -681,3 +681,53 @@ Here is the list of supported tags and their meanings: - Stores the TID of the commit, CRC of the fast commit of which this tag represents the end of +Fast Commit Replay Idempotence +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Fast commits tags are idempotent in nature provided the recovery code follows +certain rules. The guiding principle that the commit path follows while +committing is that it stores the result of a particular operation instead of +storing the procedure. + +Let's consider this rename operation: 'mv /a /b'. Let's assume dirent '/a' +was associated with inode 10. During fast commit, instead of storing this +operation as a procedure "rename a to b", we store the resulting file system +state as a "series" of outcomes: + +- Link dirent b to inode 10 +- Unlink dirent a +- Inode 10 with valid refcount + +Now when recovery code runs, it needs "enforce" this state on the file +system. This is what guarantees idempotence of fast commit replay. + +Let's take an example of a procedure that is not idempotent and see how fast +commits make it idempotent. Consider following sequence of operations: + +1) rm A +2) mv B A +3) read A + +If we store this sequence of operations as is then the replay is not idempotent. +Let's say while in replay, we crash after (2). During the second replay, +file A (which was actually created as a result of "mv B A" operation) would get +deleted. Thus, file named A would be absent when we try to read A. So, this +sequence of operations is not idempotent. However, as mentioned above, instead +of storing the procedure fast commits store the outcome of each procedure. Thus +the fast commit log for above procedure would be as follows: + +(Let's assume dirent A was linked to inode 10 and dirent B was linked to +inode 11 before the replay) + +1) Unlink A +2) Link A to inode 11 +3) Unlink B +4) Inode 11 + +If we crash after (3) we will have file A linked to inode 11. During the second +replay, we will remove file A (inode 11). But we will create it back and make +it point to inode 11. We won't find B, so we'll just skip that step. At this +point, the refcount for inode 11 is not reliable, but that gets fixed by the +replay of last inode 11 tag. Thus, by converting a non-idempotent procedure +into a series of idempotent outcomes, fast commits ensured idempotence during +the replay. diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst index 1879f881c300..230ee42f872f 100644 --- a/Documentation/process/submit-checklist.rst +++ b/Documentation/process/submit-checklist.rst @@ -75,44 +75,44 @@ and elsewhere regarding submitting Linux kernel patches. 13) Has been build- and runtime tested with and without ``CONFIG_SMP`` and ``CONFIG_PREEMPT.`` -16) All codepaths have been exercised with all lockdep features enabled. +14) All codepaths have been exercised with all lockdep features enabled. -17) All new ``/proc`` entries are documented under ``Documentation/`` +15) All new ``/proc`` entries are documented under ``Documentation/`` -18) All new kernel boot parameters are documented in +16) All new kernel boot parameters are documented in ``Documentation/admin-guide/kernel-parameters.rst``. -19) All new module parameters are documented with ``MODULE_PARM_DESC()`` +17) All new module parameters are documented with ``MODULE_PARM_DESC()`` -20) All new userspace interfaces are documented in ``Documentation/ABI/``. +18) All new userspace interfaces are documented in ``Documentation/ABI/``. See ``Documentation/ABI/README`` for more information. Patches that change userspace interfaces should be CCed to linux-api@vger.kernel.org. -21) Check that it all passes ``make headers_check``. +19) Check that it all passes ``make headers_check``. -22) Has been checked with injection of at least slab and page-allocation +20) Has been checked with injection of at least slab and page-allocation failures. See ``Documentation/fault-injection/``. If the new code is substantial, addition of subsystem-specific fault injection might be appropriate. -23) Newly-added code has been compiled with ``gcc -W`` (use +21) Newly-added code has been compiled with ``gcc -W`` (use ``make EXTRA_CFLAGS=-W``). This will generate lots of noise, but is good for finding bugs like "warning: comparison between signed and unsigned". -24) Tested after it has been merged into the -mm patchset to make sure +22) Tested after it has been merged into the -mm patchset to make sure that it still works with all of the other queued patches and various changes in the VM, VFS, and other subsystems. -25) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a +23) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a comment in the source code that explains the logic of what they are doing and why. -26) If any ioctl's are added by the patch, then also update +24) If any ioctl's are added by the patch, then also update ``Documentation/userspace-api/ioctl/ioctl-number.rst``. -27) If your modified source code depends on or uses any of the kernel +25) If your modified source code depends on or uses any of the kernel APIs or features that are related to the following ``Kconfig`` symbols, then test multiple builds with the related ``Kconfig`` symbols disabled and/or ``=m`` (if that option is available) [not all of these at the diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index fb8261a4be30..5ba54120bef7 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -411,6 +411,12 @@ Some people also put extra tags at the end. They'll just be ignored for now, but you can do this to mark internal company procedures or just point out some special detail about the sign-off. +Any further SoBs (Signed-off-by:'s) following the author's SoB are from +people handling and transporting the patch, but were not involved in its +development. SoB chains should reflect the **real** route a patch took +as it was propagated to the maintainers and ultimately to Linus, with +the first SoB entry signalling primary authorship of a single author. + When to use Acked-by:, Cc:, and Co-developed-by: ------------------------------------------------ @@ -446,7 +452,7 @@ patch. This tag documents that potentially interested parties have been included in the discussion. Co-developed-by: states that the patch was co-created by multiple developers; -it is a used to give attribution to co-authors (in addition to the author +it is used to give attribution to co-authors (in addition to the author attributed by the From: tag) when several people work on a single patch. Since Co-developed-by: denotes authorship, every Co-developed-by: must be immediately followed by a Signed-off-by: of the associated co-author. Standard sign-off |