diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-devfreq | 3 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-devices-system-cpu | 1 | ||||
| -rw-r--r-- | Documentation/admin-guide/hw-vuln/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst | 104 | ||||
| -rw-r--r-- | Documentation/admin-guide/hw-vuln/spectre.rst | 18 | ||||
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 27 | ||||
| -rw-r--r-- | Documentation/block/queue-sysfs.rst | 7 | ||||
| -rw-r--r-- | Documentation/x86/mds.rst | 38 |
8 files changed, 178 insertions, 21 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index b8ebff4b1c4c..4514cf9fc7a1 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -66,6 +66,9 @@ Description: echo 0 > /sys/class/devfreq/.../trans_stat + If the transition table is bigger than PAGE_SIZE, reading + this will return an -EFBIG error. + What: /sys/class/devfreq/.../userspace/set_freq Date: September 2011 Contact: MyungJoo Ham <myungjoo.ham@samsung.com> diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index bfb4f4fada33..2a273bfebed0 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -507,6 +507,7 @@ What: /sys/devices/system/cpu/vulnerabilities /sys/devices/system/cpu/vulnerabilities/mds /sys/devices/system/cpu/vulnerabilities/meltdown /sys/devices/system/cpu/vulnerabilities/mmio_stale_data + /sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling /sys/devices/system/cpu/vulnerabilities/retbleed /sys/devices/system/cpu/vulnerabilities/spec_store_bypass /sys/devices/system/cpu/vulnerabilities/spectre_v1 diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst index 84742be223ff..e020d1637e1c 100644 --- a/Documentation/admin-guide/hw-vuln/index.rst +++ b/Documentation/admin-guide/hw-vuln/index.rst @@ -18,3 +18,4 @@ are configurable at compile, boot or run time. processor_mmio_stale_data.rst gather_data_sampling.rst srso + reg-file-data-sampling diff --git a/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst b/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst new file mode 100644 index 000000000000..810424b4b7f6 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst @@ -0,0 +1,104 @@ +================================== +Register File Data Sampling (RFDS) +================================== + +Register File Data Sampling (RFDS) is a microarchitectural vulnerability that +only affects Intel Atom parts(also branded as E-cores). RFDS may allow +a malicious actor to infer data values previously used in floating point +registers, vector registers, or integer registers. RFDS does not provide the +ability to choose which data is inferred. CVE-2023-28746 is assigned to RFDS. + +Affected Processors +=================== +Below is the list of affected Intel processors [#f1]_: + + =================== ============ + Common name Family_Model + =================== ============ + ATOM_GOLDMONT 06_5CH + ATOM_GOLDMONT_D 06_5FH + ATOM_GOLDMONT_PLUS 06_7AH + ATOM_TREMONT_D 06_86H + ATOM_TREMONT 06_96H + ALDERLAKE 06_97H + ALDERLAKE_L 06_9AH + ATOM_TREMONT_L 06_9CH + RAPTORLAKE 06_B7H + RAPTORLAKE_P 06_BAH + ALDERLAKE_N 06_BEH + RAPTORLAKE_S 06_BFH + =================== ============ + +As an exception to this table, Intel Xeon E family parts ALDERLAKE(06_97H) and +RAPTORLAKE(06_B7H) codenamed Catlow are not affected. They are reported as +vulnerable in Linux because they share the same family/model with an affected +part. Unlike their affected counterparts, they do not enumerate RFDS_CLEAR or +CPUID.HYBRID. This information could be used to distinguish between the +affected and unaffected parts, but it is deemed not worth adding complexity as +the reporting is fixed automatically when these parts enumerate RFDS_NO. + +Mitigation +========== +Intel released a microcode update that enables software to clear sensitive +information using the VERW instruction. Like MDS, RFDS deploys the same +mitigation strategy to force the CPU to clear the affected buffers before an +attacker can extract the secrets. This is achieved by using the otherwise +unused and obsolete VERW instruction in combination with a microcode update. +The microcode clears the affected CPU buffers when the VERW instruction is +executed. + +Mitigation points +----------------- +VERW is executed by the kernel before returning to user space, and by KVM +before VMentry. None of the affected cores support SMT, so VERW is not required +at C-state transitions. + +New bits in IA32_ARCH_CAPABILITIES +---------------------------------- +Newer processors and microcode update on existing affected processors added new +bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate +vulnerability and mitigation capability: + +- Bit 27 - RFDS_NO - When set, processor is not affected by RFDS. +- Bit 28 - RFDS_CLEAR - When set, processor is affected by RFDS, and has the + microcode that clears the affected buffers on VERW execution. + +Mitigation control on the kernel command line +--------------------------------------------- +The kernel command line allows to control RFDS mitigation at boot time with the +parameter "reg_file_data_sampling=". The valid arguments are: + + ========== ================================================================= + on If the CPU is vulnerable, enable mitigation; CPU buffer clearing + on exit to userspace and before entering a VM. + off Disables mitigation. + ========== ================================================================= + +Mitigation default is selected by CONFIG_MITIGATION_RFDS. + +Mitigation status information +----------------------------- +The Linux kernel provides a sysfs interface to enumerate the current +vulnerability status of the system: whether the system is vulnerable, and +which mitigations are active. The relevant sysfs file is: + + /sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling + +The possible values in this file are: + + .. list-table:: + + * - 'Not affected' + - The processor is not vulnerable + * - 'Vulnerable' + - The processor is vulnerable, but no mitigation enabled + * - 'Vulnerable: No microcode' + - The processor is vulnerable but microcode is not updated. + * - 'Mitigation: Clear Register File' + - The processor is vulnerable and the CPU buffer clearing mitigation is + enabled. + +References +---------- +.. [#f1] Affected Processors + https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst index 0fba3758d0da..305600351209 100644 --- a/Documentation/admin-guide/hw-vuln/spectre.rst +++ b/Documentation/admin-guide/hw-vuln/spectre.rst @@ -484,11 +484,14 @@ Spectre variant 2 Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at boot, by setting the IBRS bit, and they're automatically protected against - Spectre v2 variant attacks, including cross-thread branch target injections - on SMT systems (STIBP). In other words, eIBRS enables STIBP too. + Spectre v2 variant attacks. - Legacy IBRS systems clear the IBRS bit on exit to userspace and - therefore explicitly enable STIBP for that + On Intel's enhanced IBRS systems, this includes cross-thread branch target + injections on SMT systems (STIBP). In other words, Intel eIBRS enables + STIBP, too. + + AMD Automatic IBRS does not protect userspace, and Legacy IBRS systems clear + the IBRS bit on exit to userspace, therefore both explicitly enable STIBP. The retpoline mitigation is turned on by default on vulnerable CPUs. It can be forced on or off by the administrator @@ -622,9 +625,10 @@ kernel command line. retpoline,generic Retpolines retpoline,lfence LFENCE; indirect branch retpoline,amd alias for retpoline,lfence - eibrs enhanced IBRS - eibrs,retpoline enhanced IBRS + Retpolines - eibrs,lfence enhanced IBRS + LFENCE + eibrs Enhanced/Auto IBRS + eibrs,retpoline Enhanced/Auto IBRS + Retpolines + eibrs,lfence Enhanced/Auto IBRS + LFENCE + ibrs use IBRS to protect kernel Not specifying this option is equivalent to spectre_v2=auto. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 5aa5d81ba2b6..d4baa792b3b1 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -993,6 +993,26 @@ The filter can be disabled or changed to another driver later using sysfs. + reg_file_data_sampling= + [X86] Controls mitigation for Register File Data + Sampling (RFDS) vulnerability. RFDS is a CPU + vulnerability which may allow userspace to infer + kernel data values previously stored in floating point + registers, vector registers, or integer registers. + RFDS only affects Intel Atom processors. + + on: Turns ON the mitigation. + off: Turns OFF the mitigation. + + This parameter overrides the compile time default set + by CONFIG_MITIGATION_RFDS. Mitigation cannot be + disabled when other VERW based mitigations (like MDS) + are enabled. In order to disable RFDS mitigation all + VERW based mitigations need to be disabled. + + For details see: + Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst + driver_async_probe= [KNL] List of driver names to be probed asynchronously. Format: <driver_name1>,<driver_name2>... @@ -2919,6 +2939,7 @@ nopti [X86,PPC] nospectre_v1 [X86,PPC] nospectre_v2 [X86,PPC,S390,ARM64] + reg_file_data_sampling=off [X86] retbleed=off [X86] spec_store_bypass_disable=off [X86,PPC] spectre_v2_user=off [X86] @@ -5100,9 +5121,9 @@ retpoline,generic - Retpolines retpoline,lfence - LFENCE; indirect branch retpoline,amd - alias for retpoline,lfence - eibrs - enhanced IBRS - eibrs,retpoline - enhanced IBRS + Retpolines - eibrs,lfence - enhanced IBRS + LFENCE + eibrs - Enhanced/Auto IBRS + eibrs,retpoline - Enhanced/Auto IBRS + Retpolines + eibrs,lfence - Enhanced/Auto IBRS + LFENCE ibrs - use IBRS to protect kernel Not specifying this option is equivalent to diff --git a/Documentation/block/queue-sysfs.rst b/Documentation/block/queue-sysfs.rst index 2638d3446b79..c8bf8bc3c03a 100644 --- a/Documentation/block/queue-sysfs.rst +++ b/Documentation/block/queue-sysfs.rst @@ -273,4 +273,11 @@ devices are described in the ZBC (Zoned Block Commands) and ZAC do not support zone commands, they will be treated as regular block devices and zoned will report "none". +zone_write_granularity (RO) +--------------------------- +This indicates the alignment constraint, in bytes, for write operations in +sequential zones of zoned block devices (devices with a zoned attributed +that reports "host-managed" or "host-aware"). This value is always 0 for +regular block devices. + Jens Axboe <jens.axboe@oracle.com>, February 2009 diff --git a/Documentation/x86/mds.rst b/Documentation/x86/mds.rst index 5d4330be200f..e801df0bb3a8 100644 --- a/Documentation/x86/mds.rst +++ b/Documentation/x86/mds.rst @@ -95,6 +95,9 @@ The kernel provides a function to invoke the buffer clearing: mds_clear_cpu_buffers() +Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path. +Other than CFLAGS.ZF, this macro doesn't clobber any registers. + The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state (idle) transitions. @@ -138,17 +141,30 @@ Mitigation points When transitioning from kernel to user space the CPU buffers are flushed on affected CPUs when the mitigation is not disabled on the kernel - command line. The migitation is enabled through the static key - mds_user_clear. - - The mitigation is invoked in prepare_exit_to_usermode() which covers - all but one of the kernel to user space transitions. The exception - is when we return from a Non Maskable Interrupt (NMI), which is - handled directly in do_nmi(). - - (The reason that NMI is special is that prepare_exit_to_usermode() can - enable IRQs. In NMI context, NMIs are blocked, and we don't want to - enable IRQs with NMIs blocked.) + command line. The mitigation is enabled through the feature flag + X86_FEATURE_CLEAR_CPU_BUF. + + The mitigation is invoked just before transitioning to userspace after + user registers are restored. This is done to minimize the window in + which kernel data could be accessed after VERW e.g. via an NMI after + VERW. + + **Corner case not handled** + Interrupts returning to kernel don't clear CPUs buffers since the + exit-to-user path is expected to do that anyways. But, there could be + a case when an NMI is generated in kernel after the exit-to-user path + has cleared the buffers. This case is not handled and NMI returning to + kernel don't clear CPU buffers because: + + 1. It is rare to get an NMI after VERW, but before returning to userspace. + 2. For an unprivileged user, there is no known way to make that NMI + less rare or target it. + 3. It would take a large number of these precisely-timed NMIs to mount + an actual attack. There's presumably not enough bandwidth. + 4. The NMI in question occurs after a VERW, i.e. when user state is + restored and most interesting data is already scrubbed. Whats left + is only the data that NMI touches, and that may or may not be of + any interest. 2. C-State transition |