| Age | Commit message (Collapse) | Author |
|---|
|
The error handling code of optee_ffa_probe misses the mutex_destroy of
ffa.mutex when mutext_init succeeds.
Fix this by adding mutex_destory of ffa.mutex at the error handling part
Fixes: aceeafefff73 ("optee: use driver internal tee_context for some rpc")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
TEE shared memory cleanup for v5.18
- The TEE shared memory pool based on two pools is replaced with a single
somewhat more capable pool.
- Replaces tee_shm_alloc() and tee_shm_register() with new functions
easier to use and maintain. The TEE subsystem and the TEE drivers are
updated to use the new functions instead.
- The TEE based Trusted keys routines are updated to use the new
simplified functions above.
- The OP-TEE based rng driver is updated to use the new simplified
functions above.
- The TEE_SHM-flags are refactored to better match their usage
* tag 'tee-shm-for-v5.18' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: refactor TEE_SHM_* flags
tee: replace tee_shm_register()
KEYS: trusted: tee: use tee_shm_register_kernel_buf()
tee: add tee_shm_register_{user,kernel}_buf()
optee: add optee_pool_op_free_helper()
tee: replace tee_shm_alloc()
tee: simplify shm pool handling
tee: add tee_shm_alloc_user_buf()
tee: remove unused tee_shm_pool_alloc_res_mem()
hwrng: optee-rng: use tee_shm_alloc_kernel_buf()
optee: use driver internal tee_context for some rpc
Link: https://lore.kernel.org/r/20220218184802.GA968155@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
OP-TEE fix error return code in probe functions
* tag 'optee-fix2-for-v5.17' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: fix error return code in probe function
Link: https://lore.kernel.org/r/20220214125931.GA1332792@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Removes the redundant TEE_SHM_DMA_BUF, TEE_SHM_EXT_DMA_BUF,
TEE_SHM_MAPPED and TEE_SHM_KERNEL_MAPPED flags.
TEE_SHM_REGISTER is renamed to TEE_SHM_DYNAMIC in order to better
match its usage.
Assigns new values to the remaining flags to void gaps.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
tee_shm_register() is replaced by the previously introduced functions
tee_shm_register_user_buf() and tee_shm_register_kernel_buf().
Since there are not external callers left we can remove tee_shm_register()
and refactor the remains.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds the two new functions tee_shm_register_user_buf() and
tee_shm_register_kernel_buf() which should be used instead of the old
tee_shm_register().
This avoids having the caller supplying the flags parameter which
exposes a bit more than desired of the internals of the TEE subsystem.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds a common helper function to free a tee_shm allocated using the
helper function optee_pool_op_alloc_helper().
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
tee_shm_alloc() is replaced by three new functions,
tee_shm_alloc_user_buf() - for user mode allocations, replacing passing
the flags TEE_SHM_MAPPED | TEE_SHM_DMA_BUF
tee_shm_alloc_kernel_buf() - for kernel mode allocations, slightly
optimized compared to using the flags TEE_SHM_MAPPED | TEE_SHM_DMA_BUF.
tee_shm_alloc_priv_buf() - primarily for TEE driver internal use.
This also makes the interface easier to use as we can get rid of the
somewhat hard to use flags parameter.
The TEE subsystem and the TEE drivers are updated to use the new
functions instead.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Replaces the shared memory pool based on two pools with a single pool.
The alloc() function pointer in struct tee_shm_pool_ops gets another
parameter, align. This makes it possible to make less than page aligned
allocations from the optional reserved shared memory pool while still
making user space allocations page aligned. With in practice unchanged
behaviour using only a single pool for bookkeeping.
The allocation algorithm in the static OP-TEE shared memory pool is
changed from best-fit to first-fit since only the latter supports an
alignment parameter. The best-fit algorithm was previously the default
choice and not a conscious one.
The optee and amdtee drivers are updated as needed to work with this
changed pool handling.
This also removes OPTEE_SHM_NUM_PRIV_PAGES which becomes obsolete with
this change as the private pages can be mixed with the payload pages.
The OP-TEE driver changes minimum alignment for argument struct from 8
bytes to 512 bytes. A typical OP-TEE private shm allocation is 224 bytes
(argument struct with 6 parameters, needed for open session). So with an
alignment of 512 well waste a bit more than 50%. Before this we had a
single page reserved for this so worst case usage compared to that would
be 3 pages instead of 1 page. However, this worst case only occurs if
there is a high pressure from multiple threads on secure world. All in
all this should scale up and down better than fixed boundaries.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds a new function tee_shm_alloc_user_buf() for user mode allocations,
replacing passing the flags TEE_SHM_MAPPED | TEE_SHM_DMA_BUF to
tee_shm_alloc().
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
None of the drivers in the TEE subsystem uses
tee_shm_pool_alloc_res_mem() so remove the function.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
If teedev_open() fails, probe function need return
error code.
Fixes: aceeafefff73 ("optee: use driver internal tee_context for some rpc")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
OP-TE fixes for v5.17
- Adds error checking in optee_ffa_do_call_with_arg()
- Reintroduces an accidentally lost fix for a memref size check
- Uses bitmap_free() to free memory obtained with bitmap_zalloc()
* tag 'optee-fixes-for-v5.17' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: add error checks in optee_ffa_do_call_with_arg()
tee: optee: do not check memref size on return from Secure World
optee: Use bitmap_free() to free bitmap
Link: https://lore.kernel.org/r/20220126102609.GA1516258@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Adds a driver private tee_context by moving the tee_context in struct
optee_notif to struct optee. This tee_context was previously used when
doing internal calls to secure world to deliver notification.
The new driver internal tee_context is now also when allocating driver
private shared memory. This decouples the shared memory object from its
original tee_context. This is needed when the life time of such a memory
allocation outlives the client tee_context.
This patch fixes the problem described below:
The addition of a shutdown hook by commit f25889f93184 ("optee: fix tee out
of memory failure seen during kexec reboot") introduced a kernel shutdown
regression that can be triggered after running the OP-TEE xtest suites.
Once the shutdown hook is called it is not possible to communicate any more
with the supplicant process because the system is not scheduling task any
longer. Thus if the optee driver shutdown path receives a supplicant RPC
request from the OP-TEE we will deadlock the kernel's shutdown.
Fixes: f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot")
Fixes: 217e0250cccb ("tee: use reference counting for tee_context")
Reported-by: Lars Persson <larper@axis.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds error checking in optee_ffa_do_call_with_arg() for correctness.
Fixes: 4615e5a34b95 ("optee: add FF-A support")
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Commit c650b8dc7a79 ("tee: optee: do not check memref size on return
from Secure World") was mistakenly lost in commit 4602c5842f64 ("optee:
refactor driver with internal callbacks"). Remove the unwanted code
again.
Fixes: 4602c5842f64 ("optee: refactor driver with internal callbacks")
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
kfree() and bitmap_free() are the same. But using the latter is more
consistent when freeing memory allocated with bitmap_zalloc().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is my last set of fixes for 5.16, including
- multiple code fixes for the op-tee firmware driver
- Two patches for allwinner SoCs, one fixing the phy mode on a board,
the other one fixing a driver bug in the "RSB" bus driver. This was
originally targeted for 5.17, but seemed worth moving to 5.16
- Two small fixes for devicetree files on i.MX platforms, resolving
problems with ethernet and i2c"
* tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
arm64: dts: lx2160a: fix scl-gpios property name
tee: handle lookup of shm with reference count 0
ARM: dts: imx6qdl-wandboard: Fix Ethernet support
bus: sunxi-rsb: Fix shutdown
arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode
|
|
We observed the following kmemleak report:
unreferenced object 0xffff000007904500 (size 128):
comm "swapper/0", pid 1, jiffies 4294892671 (age 44.036s)
hex dump (first 32 bytes):
00 47 90 07 00 00 ff ff 60 00 c0 ff 00 00 00 00 .G......`.......
60 00 80 13 00 80 ff ff a0 00 00 00 00 00 00 00 `...............
backtrace:
[<000000004c12b1c7>] kmem_cache_alloc+0x1ac/0x2f4
[<000000005d23eb4f>] tee_shm_alloc+0x78/0x230
[<00000000794dd22c>] optee_handle_rpc+0x60/0x6f0
[<00000000d9f7c52d>] optee_do_call_with_arg+0x17c/0x1dc
[<00000000c35884da>] optee_open_session+0x128/0x1ec
[<000000001748f2ff>] tee_client_open_session+0x28/0x40
[<00000000aecb5389>] optee_enumerate_devices+0x84/0x2a0
[<000000003df18bf1>] optee_probe+0x674/0x6cc
[<000000003a4a534a>] platform_drv_probe+0x54/0xb0
[<000000000c51ce7d>] really_probe+0xe4/0x4d0
[<000000002f04c865>] driver_probe_device+0x58/0xc0
[<00000000b485397d>] device_driver_attach+0xc0/0xd0
[<00000000c835f0df>] __driver_attach+0x84/0x124
[<000000008e5a429c>] bus_for_each_dev+0x70/0xc0
[<000000001735e8a8>] driver_attach+0x24/0x30
[<000000006d94b04f>] bus_add_driver+0x104/0x1ec
This is not a memory leak because we pass the share memory pointer
to secure world and would get it from secure world before releasing it.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Pointer to the allocated pages (struct page *page) has already
progressed towards the end of allocation. It is incorrect to perform
__free_pages(page, order) using this pointer as we would free any
arbitrary pages. Fix this by stop modifying the page pointer.
Fixes: ec185dd3ab25 ("optee: Fix memory leak when failing to register shm pages")
Cc: stable@vger.kernel.org
Reported-by: Patrik Lantz <patrik.lantz@axis.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Since the tee subsystem does not keep a strong reference to its idle
shared memory buffers, it races with other threads that try to destroy a
shared memory through a close of its dma-buf fd or by unmapping the
memory.
In tee_shm_get_from_id() when a lookup in teedev->idr has been
successful, it is possible that the tee_shm is in the dma-buf teardown
path, but that path is blocked by the teedev mutex. Since we don't have
an API to tell if the tee_shm is in the dma-buf teardown path or not we
must find another way of detecting this condition.
Fix this by doing the reference counting directly on the tee_shm using a
new refcount_t refcount field. dma-buf is replaced by using
anon_inode_getfd() instead, this separates the life-cycle of the
underlying file from the tee_shm. tee_shm_put() is updated to hold the
mutex when decreasing the refcount to 0 and then remove the tee_shm from
teedev->idr before releasing the mutex. This means that the tee_shm can
never be found unless it has a refcount larger than 0.
Fixes: 967c9cca2cc5 ("tee: generic TEE subsystem")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Lars Persson <larper@axis.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reported-by: Patrik Lantz <patrik.lantz@axis.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Eliminate the following coccicheck warning:
./drivers/tee/optee/smc_abi.c:1508:12-15: ERROR: optee is NULL but
dereferenced.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 6749e69c4dad ("optee: add asynchronous notifications")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The __get_free_pages() function does not return error pointers it returns
NULL so fix this condition to avoid a NULL dereference.
Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds support for asynchronous notifications from secure world to normal
world. This allows a design with a top half and bottom half type of
driver where the top half runs in secure interrupt context and a
notifications tells normal world to schedule a yielding call to do the
bottom half processing.
The protocol is defined in optee_msg.h optee_rpc_cmd.h and optee_smc.h.
A notification consists of a 32-bit value which normal world can
retrieve using a fastcall into secure world. The value
OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF (0) has a special meaning.
When this value is sent it means that normal world is supposed to make a
yielding call OPTEE_MSG_CMD_DO_BOTTOM_HALF.
Notification capability is negotiated while the driver is initialized.
If both sides supports these notifications then they are enabled.
An interrupt is used to notify the driver that there are asynchronous
notifications pending. The maximum needed notification value is
communicated at this stage. This allows scaling up when needed.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Renames struct optee_wait_queue to struct optee_notif and all related
functions to optee_notif_*().
The implementation is changed to allow sending a notification from an
atomic state, that is from the top half of an interrupt handler.
Waiting for keys is currently only used when secure world is waiting for
a mutex or condition variable. The old implementation could handle any
32-bit key while this new implementation is restricted to only 8 bits or
the maximum value 255. A upper value is needed since a bitmap is
allocated to allow an interrupt handler to only set a bit in case the
waiter hasn't had the time yet to allocate and register a completion.
The keys are currently only representing secure world threads which
number usually are never even close to 255 so it should be safe for now.
In future ABI updates the maximum value of the key will be communicated
while the driver is initializing.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Exports the two functions teedev_open() and teedev_close_context() in
order to make it easier to create a driver internal struct tee_context.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Prior to this patch was teedev_close_context() calling tee_device_put()
before teedev_ctx_put() leading to teedev_ctx_release() accessing
ctx->teedev just after the reference counter was decreased on the
teedev. Fix this by calling teedev_ctx_put() before tee_device_put().
Fixes: 217e0250cccb ("tee: use reference counting for tee_context")
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
This patch fixes the following Coccinelle error:
drivers/tee/optee/ffa_abi.c: 877: ERROR optee is NULL but dereferenced.
If memory allocation fails, optee is null pointer. the code will goto err
and release optee.
Fixes: 4615e5a34b95 ("optee: add FF-A support")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
[jw: removed the redundant braces]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Fix spell errors in OP-TEE FF-A driver log messages
* tag 'optee-ffa-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: Fix spelling mistake "reclain" -> "reclaim"
Link: https://lore.kernel.org/r/20211028185142.GA2489375@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are spelling mistakes in pr_err error messages. Fix them.
Fixes: 4615e5a34b95 ("optee: add FF-A support")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
[jw: added a fixes]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
In order to better track where in the kernel the dma-buf code is used,
put the symbols in the namespace DMA_BUF and modify all users of the
symbols to properly import the namespace to not break the build at the
same time.
Now the output of modinfo shows the use of these symbols, making it
easier to watch for users over time:
$ modinfo drivers/misc/fastrpc.ko | grep import
import_ns: DMA_BUF
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20211010124628.17691-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adds missing #include <linux/mm.h> drivers/tee/optee/smc_abi.c to fix
compile errors like:
drivers/tee/optee/smc_abi.c:405:15: error: implicit
declaration of function 'page_to_section'
[-Werror,-Wimplicit-function-declaration]
optee_page = page_to_phys(*pages) +
^
arch/arm/include/asm/memory.h:148:43: note: expanded from
macro 'page_to_phys'
^
include/asm-generic/memory_model.h:52:21: note: expanded
from macro 'page_to_pfn'
^
include/asm-generic/memory_model.h:35:14: note: expanded
from macro '__page_to_pfn'
int __sec = page_to_section(__pg); \
^
drivers/tee/optee/smc_abi.c:405:15: note: did you mean
'__nr_to_section'?
arch/arm/include/asm/memory.h:148:43: note: expanded from
macro 'page_to_phys'
^
include/asm-generic/memory_model.h:52:21: note: expanded
from macro 'page_to_pfn'
^
include/asm-generic/memory_model.h:35:14: note: expanded
from macro '__page_to_pfn'
int __sec = page_to_section(__pg); \
^
include/linux/mmzone.h:1365:35: note: '__nr_to_section'
declared here
static inline struct mem_section *__nr_to_section(unsigned long nr)
Fixes: c51a564a5b48 ("optee: isolate smc abi")
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20211021125539.3858495-1-jens.wiklander@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Adds support for using FF-A [1] as transport to the OP-TEE driver.
Introduces struct optee_msg_param_fmem which carries all information
needed when OP-TEE is calling FFA_MEM_RETRIEVE_REQ to get the shared
memory reference mapped by the hypervisor in S-EL2. Register usage is
also updated to include the information needed.
The FF-A part of this driver is enabled if CONFIG_ARM_FFA_TRANSPORT is
enabled.
[1] https://developer.arm.com/documentation/den0077/latest
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Isolate the ABI based on raw SMCs. Code specific to the raw SMC ABI is
moved into smc_abi.c. This makes room for other ABIs with a clear
separation.
The driver changes to use module_init()/module_exit() instead of
module_platform_driver(). The platform_driver_register() and
platform_driver_unregister() functions called directly to keep the same
behavior. This is needed because module_platform_driver() is based on
module_driver() which can only be used once in a module.
A function optee_rpc_cmd() is factored out from the function
handle_rpc_func_cmd() to handle the ABI independent part of RPC
processing.
This patch is not supposed to change the driver behavior, it's only a
matter of reorganizing the code.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The OP-TEE driver is refactored with three internal callbacks replacing
direct calls to optee_from_msg_param(), optee_to_msg_param() and
optee_do_call_with_arg().
These functions a central to communicating with OP-TEE in secure world
by using the SMC Calling Convention directly.
This refactoring makes room for using other primitives to communicate
with OP-TEE in secure world while being able to reuse as much as
possible from the present driver.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Simplifies optee_release() with a new helper function,
optee_close_session_helper() which has been factored out from
optee_close_session().
A separate optee_release_supp() is added for the supplicant device.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
When OP-TEE driver is built as a module, OP-TEE client devices
registered on TEE bus during probe should be unregistered during
optee_remove. So implement optee_unregister_devices() accordingly.
Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
sizeof when applied to a pointer typed expression gives the size of
the pointer.
./drivers/tee/optee/shm_pool.c:38:28-34: ERROR application of sizeof to pointer
This issue was detected with the help of Coccinelle.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Currently TEE_SHM_DMA_BUF flag has been inappropriately used to not
register shared memory allocated for private usage by underlying TEE
driver: OP-TEE in this case. So rather add a new flag as TEE_SHM_PRIV
that can be utilized by underlying TEE drivers for private allocation
and usage of shared memory.
With this corrected, allow tee_shm_alloc_kernel_buf() to allocate a
shared memory region without the backing of dma-buf.
Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Co-developed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds a new function tee_shm_alloc_kernel_buf() to allocate shared memory
from a kernel driver. This function can later be made more lightweight
by unnecessary dma-buf export.
Cc: stable@vger.kernel.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The shm cache could contain invalid addresses if
optee_disable_shm_cache() was not called from the .shutdown hook of the
previous kernel before a kexec. These addresses could be unmapped or
they could point to mapped but unintended locations in memory.
Clear the shared memory cache, while being careful to not translate the
addresses returned from OPTEE_SMC_DISABLE_SHM_CACHE, during driver
initialization. Once all pre-cache shm objects are removed, proceed with
enabling the cache so that we know that we can handle cached shm objects
with confidence later in the .shutdown hook.
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The following out of memory errors are seen on kexec reboot
from the optee core.
[ 0.368428] tee_bnxt_fw optee-clnt0: tee_shm_alloc failed
[ 0.368461] tee_bnxt_fw: probe of optee-clnt0 failed with error -22
tee_shm_release() is not invoked on dma shm buffer.
Implement .shutdown() method to handle the release of the buffers
correctly.
More info:
https://github.com/OP-TEE/optee_os/issues/3637
Cc: stable@vger.kernel.org
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Fix a hung task issue, seen when booting the kdump kernel, that is
caused by all of the secure world threads being in a permanent suspended
state:
INFO: task swapper/0:1 blocked for more than 120 seconds.
Not tainted 5.4.83 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
swapper/0 D 0 1 0 0x00000028
Call trace:
__switch_to+0xc8/0x118
__schedule+0x2e0/0x700
schedule+0x38/0xb8
schedule_timeout+0x258/0x388
wait_for_completion+0x16c/0x4b8
optee_cq_wait_for_completion+0x28/0xa8
optee_disable_shm_cache+0xb8/0xf8
optee_probe+0x560/0x61c
platform_drv_probe+0x58/0xa8
really_probe+0xe0/0x338
driver_probe_device+0x5c/0xf0
device_driver_attach+0x74/0x80
__driver_attach+0x64/0xe0
bus_for_each_dev+0x84/0xd8
driver_attach+0x30/0x40
bus_add_driver+0x188/0x1e8
driver_register+0x64/0x110
__platform_driver_register+0x54/0x60
optee_driver_init+0x20/0x28
do_one_initcall+0x54/0x24c
kernel_init_freeable+0x1e8/0x2c0
kernel_init+0x18/0x118
ret_from_fork+0x10/0x18
The invoke_fn hook returned OPTEE_SMC_RETURN_ETHREAD_LIMIT, indicating
that the secure world threads were all in a suspended state at the time
of the kernel crash. This intermittently prevented the kdump kernel from
booting, resulting in a failure to collect the kernel dump.
Make kernel dump collection more reliable on systems utilizing OP-TEE by
refusing to load the driver under the kdump kernel.
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Free the previously allocated pages when we encounter an error condition
while attempting to register the pages with the secure world.
Fixes: a249dd200d03 ("tee: optee: Fix dynamic shm pool allocations")
Fixes: 5a769f6ff439 ("optee: Fix multi page dynamic shm pool alloc")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"Fix many fall-through warnings when building with Clang 12.0.0 and
'-Wimplicit-fallthrough' so that we at some point will be able to
enable that warning by default"
* tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits)
rxrpc: Fix fall-through warnings for Clang
drm/nouveau/clk: Fix fall-through warnings for Clang
drm/nouveau/therm: Fix fall-through warnings for Clang
drm/nouveau: Fix fall-through warnings for Clang
xfs: Fix fall-through warnings for Clang
xfrm: Fix fall-through warnings for Clang
tipc: Fix fall-through warnings for Clang
sctp: Fix fall-through warnings for Clang
rds: Fix fall-through warnings for Clang
net/packet: Fix fall-through warnings for Clang
net: netrom: Fix fall-through warnings for Clang
ide: Fix fall-through warnings for Clang
hwmon: (max6621) Fix fall-through warnings for Clang
hwmon: (corsair-cpro) Fix fall-through warnings for Clang
firewire: core: Fix fall-through warnings for Clang
braille_console: Fix fall-through warnings for Clang
ipv4: Fix fall-through warnings for Clang
qlcnic: Fix fall-through warnings for Clang
bnxt_en: Fix fall-through warnings for Clang
netxen_nic: Fix fall-through warnings for Clang
...
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
OP-TEE use export_uuid() to copy UUID
* tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: use export_uuid() to copy client UUID
Link: https://lore.kernel.org/r/20210518100712.GA449561@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
|
Dongliang Mu
Linus Torvalds
Arnd Bergmann
Jens Wiklander
Yang Yingliang
Cai Huoqing
Jerome Forissier
Christophe JAILLET
Xiaolei Wang
Sumit Garg
Yang Li
Dan Carpenter
Lv Ruyi
Colin Ian King
Greg Kroah-Hartman
jing yangyang
Tyler Hicks
Allen Pais
Olof Johansson